LC1K1210F7 - SCHNEIDER ELECTRIC

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.

This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. *Prices are indicative

Mar 11, 2014

Product data sheet

Characteristics

LC1K1210F7

TeSys K contactor - 3P(3 NO) - AC-3 - <= 440 V

12 A - 110 V AC coil

Main

Commercial Status Commercialised

Range of product TeSys K

Product or component

type

Contactor

Device short name LC1K

Contactor application Motor control

Resistive load

Utilisation category AC-1

AC-3

AC-4

Poles description 3P

Pole contact

composition

3 NO

[Ue] rated operational

voltage

<= 690 V AC 50/60 Hz for signalling circuit

690 V AC 50/60 Hz for power circuit

[Ie] rated operational

current

12 A at <= 440 V AC AC-3 for power circuit

16 A (<= 158 °F (70 °C)) at 690 V AC AC-1 for power

circuit

20 A (<= 122 °F (50 °C)) at <= 440 V AC AC-1 for power

circuit

Motor power kW 5.5 kW at 440 V AC 50/60 Hz

5.5 kW at 380...415 V AC 50/60 Hz

3 kW at 220...230 V AC 50/60 Hz

4 kW at 660...690 V AC 50/60 Hz

4 kW at 500...600 V AC 50/60 Hz

4 kW at 480 V AC 50/60 Hz

Control circuit type AC 50/60 Hz

Control circuit voltage 110 V AC 50/60 Hz

Auxiliary contact

composition

1 NO

[Uimp] rated impulse

withstand voltage

8 kV

Overvoltage category III

[Ith] conventional free

air thermal current

10 A at <= 122 °F (50 °C) for signalling circuit

20 A at <= 122 °F (50 °C) for power circuit

Irms rated making

capacity

144 A AC for power circuit conforming to IEC 60947

144 A AC for power circuit conforming to NF C 63-110

110 A AC for signalling circuit conforming to IEC 60947

Rated breaking

capacity

70 A at 660...690 V conforming to IEC 60947

80 A at 500 V conforming to IEC 60947

110 A at 440 V conforming to IEC 60947

[Icw] rated short-time

withstand current

25 A <= 122 °F (50 °C) >= 15 s power circuit

50 A <= 122 °F (50 °C) 3 min power circuit

55 A <= 122 °F (50 °C) 1 min power circuit

75 A <= 122 °F (50 °C) 30 s power circuit

100 A <= 122 °F (50 °C) 10 s power circuit

105 A <= 122 °F (50 °C) 5 s power circuit

115 A <= 122 °F (50 °C) 1 s power circuit

110 A 100 ms signalling circuit

90 A 500 ms signalling circuit

80 A 1 s signalling circuit

Associated fuse rating 10 A gG for signalling circuit conforming to VDE 0660

10 A gG for signalling circuit conforming to IEC 60947

25 A aM for power circuit

25 A gG at <= 440 V for power circuit

Average impedance 3 mOhm at 50 Hz - Ith 20 A for power circuit

[Ui] rated insulation

voltage

600 V for signalling circuit conforming to CSA C22.2 No

600 V for power circuit conforming to CSA C22.2 No 14

600 V for signalling circuit conforming to UL 508

690 V for signalling circuit conforming to IEC 60947-5-1

690 V for signalling circuit conforming to IEC 60947-4-1

690 V for power circuit conforming to IEC 60947-4-1

600 V for power circuit conforming to UL 508

Electrical durability 1.3 Mcycles 12 A AC-3 at Ue <= 440 V

0.3 Mcycles 20 A AC-1 at Ue <= 440 V

Mounting support Plate

Rail

Standards BS 5424

IEC 60947

NF C 63-110

VDE 0660

Product certifications CSA

Connections - terminals Screw clamp terminals 2 cable(s) 0...0 in² (0.34...1.5

mm²) - cable stiffness: flexible - with cable end

Screw clamp terminals 2 cable(s) 0...0.01 in² (0.75...4

mm²) - cable stiffness: flexible - without cable end

Screw clamp terminals 2 cable(s) 0...0.01 in² (1.5...4

mm²) - cable stiffness: solid

Screw clamp terminals 1 cable(s) 0...0 in² (0.34...2.5

mm²) - cable stiffness: flexible - with cable end

Screw clamp terminals 1 cable(s) 0...0.01 in² (0.75...4

mm²) - cable stiffness: flexible - without cable end

Screw clamp terminals 1 cable(s) 0...0.01 in² (1.5...4

mm²) - cable stiffness: solid

Tightening torque 11.5 lbf.in (1.3 N.m) - on screw clamp terminals - with

screwdriver flat Ø 6 mm

11.5 lbf.in (1.3 N.m) - on screw clamp terminals - with

screwdriver Philips No 2

Operating time 10...20 ms coil energisation and NO closing

10...20 ms coil de-energisation and NO opening

Safety reliability level B10d = 20000000 cycles contactor with mechanical load

conforming to EN/ISO 13849-1

B10d = 1369863 cycles contactor with nominal load

conforming to EN/ISO 13849-1

Mechanical durability 10 Mcycles

Operating rate 3600 cyc/h

Complementary

Control circuit voltage limits 0.2...0.75 Uc at <= 122 °F (50 °C) drop-out

0.8...1.15 Uc at <= 122 °F (50 °C) operational

Inrush power in VA 30 VA at 68 °F (20 °C)

Hold-in power consumption in VA 4.5 VA at 68 °F (20 °C)

Heat dissipation 1.3 W

Auxiliary contacts type Type instantaneous (1 NO)

Signalling circuit frequency <= 400 Hz

Minimum switching current 5 mA for signalling circuit

Minimum switching voltage 17 V for signalling circuit

Non overlap distance 0.02 in (0.5 mm)

Insulation resistance > 10 MOhm for signalling circuit

Environment

IP degree of protection IP2x conforming to VDE 0106

Protective treatment TC conforming to DIN 50016

TC conforming to IEC 60068

Ambient air temperature for operation -13...122 °F (-25...50 °C)

Ambient air temperature for storage -58...176 °F (-50...80 °C)

Operating altitude 6561.68 ft (2000 m) without derating in temperature

Flame retardance Requirement 2 conforming to NF F 16-102

Requirement 2 conforming to NF F 16-101

V1 conforming to UL 94

Mechanical robustness Vibrations contactor opened 2 Gn, 5...300 Hz IEC 60068-2-6

Vibrations contactor closed 4 Gn, 5...300 Hz IEC 60068-2-6

Shocks contactor opened, on Z axis 10 Gn for 11 ms IEC 60068-2-27

Shocks contactor opened, on Y axis 10 Gn for 11 ms IEC 60068-2-27

Shocks contactor opened, on X axis 6 Gn for 11 ms IEC 60068-2-27

Shocks contactor closed, on Z axis 15 Gn for 11 ms IEC 60068-2-27

Shocks contactor closed, on Y axis 15 Gn for 11 ms IEC 60068-2-27

Shocks contactor closed, on X axis 10 Gn for 11 ms IEC 60068-2-27

Height 2.28 in (58 mm)

Width 1.77 in (45 mm)

Depth 2.24 in (57 mm)

Product weight 0.4 lb(US) (0.18 kg)

Ordering and shipping details

Category 22326 - CTR,K-LINE,AC,OPEN,NONREV

Discount Schedule I12

GTIN 00785901304067

Nbr. of units in pkg. 1

Package weight(Lbs) 0.40

Product availability Stock - Normally stocked in distribution facility

Returnability Y

Country of origin FR

Offer Sustainability

Sustainable offer status Green Premium product

RoHS Compliant - since 0640 - Schneider Electric declaration of conformity

REACh Reference not containing SVHC above the threshold

Product environmental profile Available Download Product Environmental

Product end of life instructions Need no specific recycling operations

Contractual warranty

Period 18 months