P5 ALTERNATE ACTION ALTERNATE ACTION PUSHBUTTONS SEALED AGAINST DUST & MOISTURE The P5 Alternate Action switches match the P1, P3 and P8 Momentary Action Pushbutton models for mixed function with common panel appearance. Now you can design panels with both alternate and momentary action switches and have uniform panel appearance. The P5 features alternate action in the same pushbutton and housing configuration as the momentary P1 and P3 and as a bonus, the P5 requires less behind the panel space than the P1 and P3 momentary versions. ction ush Off" a ,P "Push On Style P5-4 Style P5-6 Style P5-3 Push and the P5 switch turns "on." Push again and the P5 switch turns "off." Positive tactile feedback is featured so the operator is clearly aware the switch mode has been executed. The button returns to the original position after each actuation. To guard against front panel splash and dirt, the P5 series is sealed at the button with OTTO's patented "rolling sleeve"principle. The terminals are sealed with epoxy, providing a seal against flux during wiring and behind panel dirt and moisture. The combination of sealing provides smooth operation over a wide temperature range. Watertight sealing to IP68S is available. A vandal resistant style is available in the P5-V series. Custom housings, shrouded buttons, contact configurations and materials are available to suit your application requirements. We also provide custom button engraving with epoxy ink backfill, watertight versions and other special characteristics. Features: * Button sealed with patented "rolling sleeve" principle * Contact area sealed at case & terminals * Moistureproof & dusttight to IP64 & MIL-PRF-8805 Design 2 or watertight to IP68S * Less than 25m contact resistance * Handles low level up to 10 amps * Variety of mounting styles * Engraved buttons available * Choice of 9 button & 3 bezel colors * Panel appearance matches most other OTTO momentary pushbutton switches * Unsealed construction also available * RoHS/WEEE/Reach compliant 119 OTTO Full Line Catalog Style P5-1 Standard Characteristics/Ratings: ELECTRICAL RATINGS: Load Sea Level @ 28VDC or 115VAC, 60/400Hz Resistive 10A Inductive 5A Lamp 1A Motor 3A DWV 1050Vrms Low Level 10mA @ 30mV Electrical Life: 25,000 cycles Mechanical Life: 1,000,000 cycles Seal: IP64 & MIL-PRF-8805 Design 2 or IP68S Operating Temp Range: -55C to +85C Operating Force: 3.0 lbs. +1/-0.5 lb. Total Travel: 0.180 inches max Overtravel: 0.012 inches min MATERIALS: Case: Anodized aluminum alloy Button:Thermoplastic Terminals: Brass, silver plate or gold plate for low level Terminal Hardware: Terminal lugs, lockwasher and screw for screw terminal option Mounting Hardware: Hex nut, lockwasher and panel seal on watertight switches Specifications Subject To Change Without Notice P5 ALTERNATE ACTION PUSHBUTTONS ALTERNATE ACTION SEALED AGAINST DUST & MOISTURE P5-1 Series P5-3 Series Case Style 1 Press Fit Mount Case Style 3 Bezel/Threaded Bushing P5-4 Series P5-6 Series Case Style 4 15/32" Threaded Bushing Case Style 6 5/8" Threaded Bushing 1.281 MAX. .375.015 .875 .062 .500 .250 .062 .156 MIN. FROM POTTING 3X .182 .375 .563 +.003 -.005 5/8-24 UNEF-2A TO WITHIN .062 OF FLANGE P5 PART NUMBER CODE P5 - X X X X X X Terminal Style Circuit Form/Contact Material/Grade Seal Level Bezel Color Button Color 1. Style 1 3. Style 3 4. Style 4 6. Style 6 1. Solder 2. Screw 3. 0.250" Quick Connect 1. SPST/Silver/Commercial 2. SPST/Gold/Commercial 3. SPDT/Silver/Commercial 4. SPDT/Gold/Commercial 5. SPST/Silver/Military Grade 6. SPST/Gold/Military Grade 7. SPDT/Silver/Military Grade 8. SPDT/Gold/Military Grade 1. Unsealed 2. Dusttight 3. Watertight 1. Silver 2. Black 3. Red 1. Red 2. Black 3. Orange 4. Yellow 5. Green 6. Blue 7. Purple 8. Gray 9. White PUSHBUTTONS Case Style Screw terminals available on SPST circuit forms only. Specifications Subject To Change Without Notice www.ottoexcellence.com 120