THE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. DOCUMENT / PART NO.: SI-60116-F 4) COMPONENTSror A CONNECTED PLANET TITLE : 10/100BT, TAB DOWN SHIELDED PATENTED: THIS PRODUCT IS COVERED BY U.S. PATENT 5,736,910 ISSUE DESCRIPTION OF CHANGE REVIEWED BY APPROVED BY ECN# AO |Use new format and production release. Bain Liu Steve Weller 06372 PAGE| 1 | 2| 3] 4 |--|--|-- REV. | AO | AO | AO | AO | -- | --| -- PAGE| -- | -- | --| --| --| --] -- CO148-F REV Al REv. | -- | -- | --| --| --| --]| -- 24-0153-F REV AQ FM999185 REV B1 This document is electronically generated. This is a controlled copy if used internally PAGE 1 OF 4THE INFORMATION CONTAINED HEREIN IS CONSIDERED "PROPRIETARY" TO BEL FUSE INC. AND SHALL NOT BE sore. COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. ELECTRICAL CHARACTERISTICS @ 25C 1.0 TURNS RATIO: (P3P5P6) : (J3J6) : 1CT: 1CT + 3% PINS SCHEMATIC RJ45 P1P4P2) : (J1J2) : 1CT : 1CT + 3% 2.0 INDUCTANCE: (P1P2 : 350uH MIN. @ 0.1V, 100KHz, 8mA DC Bias TD+ PI Jl TX+ ome 350uH MIN. @ 0.1V, 100KHz, 8mA DC Bias Lite wu TCT P4 | 3.0 LEAKAGE INDUCTANCE: P6P3 (WITH J6 AND J3 SHORT) : 0.3uH MAX. @ 1MHz D- p2 r q J2 X- P2P1 (WITH J2 AND J1 SHORT) : 0.3uH MAX. @ 1MHz 4.0 INTERWINDING CAPACITANCE: (P6,P5,P3) TO (J6,J3) : 30pf MAX @ 1MHz RD+ Ps Lid U5 RX+ P2,P4,P1) TO (J2,J1) : 30pf MAX. @ 1MHZ TCT PS WON 5.0 DC RESISTANCE: (u6J3)=(J2u1) : 1.2 ohms Max. RD P6 f J6 RX- RECEIVE A 6.0 RETURN LOSS: (P6P4)=100 OHMS AND (P1P2)=100 OHM REF. 1MHz TO 30MHz : 18dB MIN. J5 60MHz TO 80MHz : 12dB MIN. NOTE: 100 OHMS CONNECTED TO (J2u1) OR (J6u3). 7.0 DIELECTRIC WITHSTAND: (v1, U2) TO (P1, P2) : 1500 Vrms 7 J3, J6) TO (P3, P6) : 1500 Vrms B 8.0 INSERTION LOSS: RS=RL=100 ohms 100KHz TO 100MHz : 1.1 dB TYP 9.0 RISE TIME: RS=100 OHMS AND RL = 100 OHMS b OUTPUT VOLTAGE = 1 V peak : 3.0 nS MAX 4x 75 OHMS PULSE WIDTH= 112nS : 3.0 nS MAX 10.0 CROSS TALK: 1MHz TO 100MHz : 40 dB TYP 1000pF 2kV 11.0 COMMON TO COMMON MODE ATTENUATION: 30MHz TO 100MHz : 35dB TYP PB | 12.0 OPERATING TEMPERATURE : OC TO 70C NOTES 1.0 PINS WITHOUT ELECTRICAL CONNECTION ARE OMITTED. ORIGINATED BY DATE TITLE M PART NO. / DRAWING NO. STANDARD DIM. [] METRIC DIM. AS REFERENCE Zeng Xiao Chun 07-04-2011 ack SI-60116-F TOL. IN INCH UNIT : INCH [mm] REV.: AO bel 10/100BT X DRAWN BY DATE FILE NAME COMPONENTSron A SCALE: N/A SIZE: A4 TAB DOWN SHIELDED SI-60116-F.DWG XX nner Zhang Ru Sheng 07-04-2011 PATENTED . XXX +0.005 @) PAGE: 2 FM999185 REV B1 This document Is electronically generated. This Is a controlled copy If used InternallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED "PROPRIETARY" TO BEL FUSE INC. AND SHALL NOT BE # .035 [0.89] +003 [0.08] COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. .050 [1.27] (7) > 635 [16.13] MAX 080 [1.27] ag 9.062 [1.57] + .003 [0.08] (2)(SHIELD) ha {2 3 oH? ? 1 8 PATENTED > hb th- > = EnTeY YW Fo = 128 [3.25] [+450 [11.43] +] <b t 4 CNTRY YYWW FC = . . . . Bel Stewart 3 Ton 1318] (2\POSTS) z 125 [3.18] Ne = ay | Qo wo Ld \ 3 a | BL x 9.040 [1.02(4)(LED) | / & re [2.54] (2) 8 = 149 [3.78] (2) 9, (708 1798) | ( 148 [3.75] ) 9 2 HIGHEST POINT = OF BEAM H- .610 [15.49] +} . [ae > P.C.B. RECOMMENDED HOLE LAYOUT PIN: Jt | 3 SEEN FROM COMPONENT SIDE XQ & ALL CENTERLINE DIMENSIONS ARE BASIC rei ~_ 0 = Ss B STEWART 2 > r PATENTED B 5-7 2 LED 7; 3 Pz LED rs 4 = NOTES: GREEN LAT Zz: YELLOW | f PH) | J { 1. CONNECTOR MATERIALS: j 1 HOUSING: THERMOPLASTIC UL94 V-0 i! Hf i CONTACT/SHIELD: COPPER ALLOY } SHIELD PLATING: NICKEL OR TIN .083 [2.12] ) ( 085 ae CONTACT PLATING: SELECTIVE GOLD, 450 [11.43] 4 040 [1.02] OF BEAM 495 [10.79] 50 MICRO-INCHES MIN. IN CONTACT AREA. 2. PIN NOT ELECTRICALLY CONNECTED MAYBE OMITTED. LED SPECIFICATION LED POLARITY DETAIL SEE ELECTRICAL DRAWING FOR OMITTED PINS. STANDARD LED | WAVELENGTH | FORWARD V (MAX) | * (TYP) | 1 o 3. TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. GREEN 565 nm 29 V 22 V 4, ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +005 [0.13] YELLOW 590 nm 25V 21V GREEN YELLOW 5. REFLOW AND WAVE SOLDER COMPATIBLE -260C FOR p- 10 SECONDS MAX. *WITH A FORWARD CURRENT OF 20 mA (TYP) ORIGINATED BY DATE TITLE M PART NO. / DRAWING NO. STANDARD DIM. [] METRIC DIM. AS REFERENCE i Zeng Xiao Chun 07-04-2011 agJack SI-60116-F TOL. IN INCH UNIT : INCH [mm] REV.: AO bel 10/100BT X DRAWN BY DATE FILE NAME SCALE: NIA SIZE: A4 TAB DOWN SHIELDED SI-60116-F.DWG XX ape Zhang Ru Sheng 07-04-2011 PATENTED . XXX +0.005 @) PAGE: 3 FM999185 REV B1 This document Is electronically generated. This Is a controlled copy If used InternallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED "PROPRIETARY" TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. 656 [16.66] (i 554 [14.07] SUGGESTED PANEL OPENING Loo [0.00] (TOP OF PCB TO BOTTOM OF OPENING) J L O 2002/95/EC POINT OF CONTACT WITH PANEL 080 [2.03] = > i= | rey 275 [6.98] MAX. 010 [0.25] MAX. RADIUS(4) |. THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE THE USER THE ABILITY TO HAVE REASONABLE JACK / PANEL CLEARANCES YET MAINTAIN RELIABLE GROUNDING CAPABILITY. 2. ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +005 [0.13] ORIGINATED BY DATE TITLE M i e PART NO. / DRAWING NO. STANDARD DIM. [] METRIC DIM. AS REFERENCE Zeng Xiao Chun 07-04-2011 agJ S1-60116-F TOL. IN INCH UNIT : INCH [mm] REV.: AO bel 10/100BT X DRAWN BY DATE FILE NAME SCALE: NIA SIZE: AA COMPONENTS:on A TAB DOWN SHIELDED SI-60116-F.DWG XX = nner Zhang Ru Sheng 07-04-2011 PATENTED . XXX +0.005 @) PAGE: 4 FM999185 REV B1 This document Is electronically generated. This Is a controlled copy If used Internally