V16
2
INPUT SPECIFICATIONS:
Voltage …....………....…..............…………………..……………… 90~264Vac
Frequency ………………………………………........……………..... 47 to 63Hz
Inrush Current ………………..……. Cold Start @25℃80A max. @240Vac
Conducted EMI ……………………..…………….…… CISPR/FCC Class B
Leakage Current ……………………………………..……………… 0.1mA max.
OUTPUT SPECIFICATIONS:
Holdup Time …………………………………………......… 8ms typ. @115Vac
Short Circuit Protection …………….…………………….….……… Continuous
Over Voltage Protection ………………..................................................… Yes
Temperature Coefficient …………………….............................….…±0.05%/℃
GENERAL SPECIFICATIONS:
NOTE:
Isolation …………………………………………… Input to output =5,656VDC
1. Voltage accuracy at 60% full load.
Operating Temperature ................................... 0 ~ 60℃ (see derating curve)
2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for
Storage Temperature …………………………...….......…….......... -20 ~ 85℃
Ripple & Noise measurement @20MHz BW.
Humidity …………………..….......………........ 93% RH max. Non condensing
3. Line regulation measured from 100Vac to 240Vac, full load.
Cooling ………………………………….…………………… Natural Convection
4. Load regulation measured from 60% to 100% full load and from 60%
Switching Frequency ………………………………………… 100KHz Typical
to 20% full load (60% +/- 40% full load).
MTBF ……… MIL-HDBK-217F, GB, at 25℃/115VAC ………. 200K hrs min.
5. Typical efficiency at 230VAC and full load at 25℃.
Altitude ……………………………………………………………………… 3000m
6. ”Various TR Series adapters are PSE certified. PSE certification
Dimensions …….……. . 5.197x2.283x1.201inches (132.00x58.00x30.50mm)
alone is not sufficient for importation into Japan. A valid PSE mark
Weight …………………... ………………………………… 345g(0.76 Pounds)
must contain the name of the importer as shown in the example below.
SAFETY AND EMC:
If PSE mark is required, the name of the registered importer must be
Emission and lmmunity …………… EN55011, EN60601-1-2, EN61000-3-2
supplied to Cincon on order placement. Product labels will not contain
EN61000-3-3
PSE mark if importer name is not supplied. Consult factory or local
Safety …………………..… IEC60601-1, EN60601-1, UL ANSI/AAMI ES60601-1:2005
represen tative for details”.
Mechanical Specification
IEC320/C8
70.866[1800.00]±1.969[50.00]
LED
2.283[58.00]
5.197[132.00]
1.201[30.50]
DC Plug :Right Angle(ψ5.5/ψ2.1) L12mm
18AWG/1800mm
DC Plug type: V+ ─●)─ V-
Millimeters:X.XX±0.5
Tolerance:Inches:X.XXX±0.02
All Dimensions are in inches(mm)
Typical at 25˚C, nominal line and 75% load, unless otherwise Specified
0%
25%
50%
75%
100%
0 10 20 30 40 50 60
Ambient Temperature(
o
C)
Rated Load(%)
20LFM(Natural Convection)