Major usesSeries
Standard Specifications & Coil Series Guide
AMORPHOUS CHOKE COIL Characteristics
Accessories
CM
FM
AM
AW
TM
BM
SM
Switching mode power supplies
DC-DC converter
Normal mode line filter
Switching mode power supplies
DC-DC converter
Normal mode line filter
Switching mode power supplies
DC-DC converter
Normal mode line filter
DC-DC converter
Switching mode power supplies
Line filter for inverter or large power supply
High frequency transformer
Harmonic counter-measure active filter
Normal mode line filter
CMJ
Switching mode power supplies
Step up and down converter
Harmonic counter-measure active filter
Uninterruptible power supply system (UPS)
EM
Noise preventive use for alternator
Toroidal with gap
Miniatur-
ization
Thin
Type Low
loss Low
cost
Large
capacity
Classification
Toroidal without gap
Package
Common mode
Upgrade
Upgrade
@Because the insulating material of type B is used, the operating temperature of the coil should be less than 130C.
@Note that the lead wire may not be subject to excess force and also may not be bent repeatedly because the wire is made of
copper.
@Never make the coil hit on a hard and/or sharp substance. If so, the coating of the coils may be damaged to ruin the
performace of the coil.
@Contact NIPPON CHEMI-CON for how to clean the substrate on which the coil is mounted.
@When infra-acoustic frequency component is impressed, a beat sound some times occur.
?List of products
Notes on use
Please ask for the individual catalog (NO. E1003), If you require the detailed specifications.
Please ask for the individual catalog (NO. E1003), If you require the detailed specifications.
General specification can be Pb-free.
Contact NIPPON CHEMI-CON for details.
CAT. No. E1008E
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
The amorphous metal has non cystalline structure generated by cooling molten metal rap-
idly. Due to the amorphous structure, the amorphous metal has excellent magnetic, me-
chanical, and chemical features in comparison with conventional metallic substances.
NIPPON CHEMI-CON started developing amorphous components for electronic and elec-
tric equipment by making full use of the metarial and process technologies at its early
stages and has continued the synthetic research and development to optimally match the
amorphous choke coils with the material features and their applications through a variety of
characteristics. NIPPON CHEMI-CON will help the customers design smaller and higher
performance products by supplying excellent amorphous choke coils through the sophisti-
cated production technology and manufacturing know-how.
Rated value
-25 to 130C
-25 to 130C
20 to 95%RH
20 to 80%RH
20kHz to 500kHz
40deg. or less
1A and more
10 to 1900mH
Type B (130C)
UL 94 V-0
Items
Operating temperature range
Storage temperature range
Operating humidity range
Storage humidity range
Operating frequency range
Temperature rise
Rating current range
Rating inductance
(CM series)
Insulation type
Incombustibility
*1
*2
*3
*4
*5
?General Specification of Toroidal Coil
*1 Temperature on the coil surface including the temperature rise in installation. Never use the coil
at a temperature exceeding the rated temperature range.
*2 Recommended range. When infra-acoustic frequency component is impressed, a beat sound
some times occur.
*3 The temperature rise on the coil surface at the rated d.c. current.
*4 The incombustibility varies depending on the rated current. LCR meter, 10kHz.
*5 The housing case is made of FRPBT
Amorphous metal and NIPPON CHEMI-CON Amorphous Choke Coil
@Because the insulating material of type B is used, the operating temperature of the coil should be less than 130C.
@Note that the lead wire may not be subject to excess force and also may not be bent repeatedly because the wire is made of
copper.
@Never make the coil hit on a hard and/or sharp substance. If so, the coating of the coils may be damaged to ruin the
performace of the coil.
@Contact NIPPON CHEMI-CON for how to clean the substrate on which the coil is mounted.
@When infra-acoustic frequency component is impressed, a beat sound some times occur.
?Notes on use
Note carefully that the temperature of the core may exceed the operating temperature range de-
pending on the circumference condition even if the coil is used in the specification ranges de-
scribed above.
Bottom of coil
Side view
*
* Start and end of wire
Maximum outer diameter :
Maximum width :
Total lead length *1 :
Soldering boundary *1 :
W
D2
D1
a
L
Bottom view
D1(Vertical), D2(Horizontal)
W
L=15mm(+3mm, -3mm)
a=1.5mmMAX
*1 The bottom of the core or coil ( ) is defined
as base surface.
Maximum outer diameter *1 :
Maximum width *1 :
Maximum width :
Total lead length *2 :
Soldering boundary *2 :
W
D2
D1
a
L
D2
D1
W
L=13mm(+2mm, -2mm)
a=0mm MAX
*1
Indicates the maximum dimersion of coil or stand.
*2
The bottom of the core or coil ( ) is defined
as base surface.
Maximum outer diameter :
Maximum width :
Total lead length :
Soldering boundary :
WD2
D1
a
L
D1(Vertical), D2(Horizontal)
W
L=30mm(+3mm, -3mm)
a=1.5mmMAX
*The bottom of the core or coil ( ) is defined
as base surface.
W
D2
D1
a
L
Pedestal bottom
*Start and end of wire
Maximum outer diameter *1 :
Maximum width :
Total lead length *2 :
Soldering boundary *2 :
D1, D2
W
L=13mm(+2mm, -2mm)
a=0mm MAX
*1
Indicates the maximum dimersion of coil or stand.
*2
The bottom of the core or coil ( ) is defined
as base surface.
?DIMENSIONS
(1/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
Major usesSeries
AMORPHOUS CHOKE COIL Characteristics
Accessories
CM
FM
AM
AW
TM
BM
SM
Switching mode power supplies
DC-DC converter
Normal mode line filter
Switching mode power supplies
DC-DC converter
Normal mode line filter
Switching mode power supplies
DC-DC converter
Normal mode line filter
DC-DC converter
Switching mode power supplies
Line filter for inverter or large power supply
High frequency transformer
Harmonic counter-measure active filter
Normal mode line filter
CMJ Switching mode power supplies
Step up and down converter
Harmonic counter-measure active filter
Uninterruptible power supply system (UPS)
EM Noise preventive use for alternator
Toroidal with gap
Miniatur-
ization
Thin
Type Low
loss Low
cost
Large
capacity
Classification
Toroidal without gap
Package
Common mode
Upgrade
Upgrade
Lower loss
Power capacity of applied power supply Po [W]
1 10 100 1k 10k
(For smoothing output)
SM Thin package
(For smoothing output)
BM Toroidal without gap
(For smoothing output)
TM Toroidal without gap
(For active filter)
AM Toroidal with gap
(For active filter)
AW Toroidal with gap
(For step up con verter)
CMJ Toroidal with gap
(For alternator)
EM Toroidal without gap
(For smoothing output)
CM Toroidal with gap
Solder control code6
Specifications control code
5
Mounting Direction4
Core Abbreviation3
Rated Inductance2
Rated Current1
Series
Section code
Class code
L B T M 0 1 0 3 0 0 N 6
-
0 0V
13426789105121311 161514
Specifications
Standard
Custom
Code
0
1
Specifications
Standard Solder
Pb free
Code
0
E
Rated Current
0.5A
1A
10A
100A
Code
0R5
001
010
100
1Rated Current code
Rated Inductance
0.5MH
1MH
10MH
100MH
1000MH
Code
0R5
010
100
101
102
2
Rated Inductance code
Core Abbreviation
N6
JRH
Code
N6-
JRH
3
Core Abbreviation code Mounting Direction
Vertical
Horizontal
Vertical pedestal
Horizontal pedestal
Vertical pedestal with pins
Horizontal pedestal with pins
Code
V
H
D
B
Y
W
4Mounting Direction code
5Specifications control code 6Solder control code
The current parts numbering system is changed to new system for global coding.
Your cooperation will be very much appreciated.
(2/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?CORE STANDARD SPECIFICATIONS
?MAJOR USES
@Output choke coils for Switching Mode Power Supply
@For DC-DC converter
@Normal mode choke coils for noise control
?FEATURES
@Smaller size in comparison with ferrite choke coil by about half in volume
@Lower core loss in comparison with silicon steel sheet by about half
@More excellent DC bias and temperature characteristics in comparison with
dust choke
Outside Dimensions
Abbreviation
Core Part No.
(Old Core Part No.)
mmmm
21.0 9.0
Inductance Coefficient AL Value
Idc=0[A]
Rated
Current*
0.122 0.116
mHmH
Cross
Sectional
Area
cm2
0.264
Magnetic
Path
Length
cm
4.71
mm
12.5
Rated Current
Ampere Turn
150
[AT]
Outer
Diameter Width Height
49.4 22.7 0.360 0.3202.090 11.5 28.0 550
49.4 22.7 0.235 0.207
1.254 11.5 18.0 450
40.5 19.5 0.210 0.1900.924 9.42 18.0 400
40.5 19.5 0.154 0.1400.616 9.42 13.0 350
35.2 17.5 0.137 0.1250.528 8.17 12.3 330
28.3 12.7 0.185 0.1700.660 6.28 17.5 330
28.3 12.7 0.133 0.1200.440 6.28 12.3 300
24.7 10.5 0.164 0.1470.396 5.50 12.0 190
(C181210G)
(C462725G)
(C462715G)
(C372315G)
(C372310G)
(C322010G)
(C251515G)
(C251510G)
(C221310G)
(C191305G)
LNC181210G
LNC462725G
LNC462715G
LNC372315G
LNC372310G
LNC322010G
LNC251515G
LNC251510G
LNC221310G
LNC191305G
G3
GK
GQ
GJ
G0
G9
G8
G7
G6
G4 22.0 10.0 0.050 0.0450.132 5.03 8.0 200
1000
1
100
10
110 100 1000 10000
Magnetic flux density D Bp-p [mT]
Core loss PFe [mW/g]
300[kHz]
200[kHz]
150[kHz]
100[kHz]
80[kHz]
50[kHz]
20[kHz]
?CORE LOSS CHARACTERISTICS
@CM choke
(1/5)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
NI [AT]
AL [MH]
0
0.1
0.2
0 100 200 300 400 500 600 700
LNC191305G
LNC181210G
LNC251510G
LNC251515G
LNC221310G
?D.C. BIAS CHARACTERISTICS AL-AT(1)
@Frequency : 10[kHz]
?D.C. BIAS CHARACTERISTICS AL-AT(2)
@Frequency : 10[kHz]
0
0.1
0.2
0.3
0.4
0 200 400 600 800 1000 1200
NI [AT]
AL [MH]
LNC322010G
LNC372315G
LNC372310G
LNC462725G
LNC462715G
5000 10000
0.5
00
1.5
1
2
Magnetic field H [A/m]
Magnetic flux density B [T]
?MAGNETIC FIELD - MAGNETIC DENSITY ?FREQUENCY - INDUCTANCE CHARACTERISTICS
120
110
100
90
80
70 10
1100 1000
Frequency f [kHz]
Relative value [%]
140
120
100
80
60
40
-20 200 40 60 80 100 120 140
Inductance Rated Current
Idc=0 [A]
Core loss
Temperature [C]
Core loss Relative value [%]
?TEMPERATURE DEPENDENCE - INDUCTANCE AND CORE LOSS
@CM Core
@Frequency : 100[kHz]
(2/5)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E(3/5)
?COIL STANDARD SPECIFICATIONS
WD2
D1
a
L
Maximum outer diameter :
Maximum width :
Total lead length :
Soldering boundary :
D1(Vertical), D2(Horizontal)
W
L=30mm(+3mm, -3mm)
a=1.5mmMAX
*The bottom of the core or coil ( ) is defined
as base surface.
LACM002601G3-V00
(CM02601G3)
LACM003401G3-V00
(CM03401G3)
LACM004201G3-V00
(CM04201G3)
LACM006101G3-V00
(CM06101G3)
LACM008700G3-V00
(CM08700G3)
LACM002401G4-V00
(CM02401G4)
LACM003201G4-V00
(CM03201G4)
LACM003251G4-V00
(CM03251G4)
LACM004101G4-V00
(CM04101G4)
LACM006500G4-V00
(CM06500G4)
LACM008300G4-V00
(CM08300G4)
LACM010150G4-V00
(CM10150G4)
LACM001152G6-V00
(CM01152G6)
LACM002102G6-V00
(CM02102G6)
LACM003501G6-V00
(CM03501G6)
LACM003601G6-V00
(CM03601G6)
LACM004251G6-V00
(CM04251G6)
LACM004301G6-V00
(CM04301G6)
LACM004451G6-V00
(CM04451G6)
LACM005151G6-V00
(CM05151G6)
LACM006151G6-V00
(CM06151G6)
LACM010500G6-V00
(CM10500G6)
LACM010700G6-V00
(CM10700G6)
LACM015150G6-V00
(CM15150G6)
LACM020150G6-V00
(CM20150G6)
Inductance (10kHz)
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
2
3
4
6
8
2
3
3
4
6
8
10
1
2
3
3
4
4
4
5
6
10
10
15
20
645
420
209
110
85
425
210
265
110
55
33
18
1530
1050
560
690
271
339
560
165
171
60
85
17
17
600
400
200
100
70
400
200
250
100
50
30
15
1500
1000
500
600
250
300
450
150
150
50
70
15
15
190
92
51
24
17
190
76
87
43
20
13
8
390
230
95
110
52
59
80
34
27
11
13
5
4
23.5
24.5
24.5
24.5
25.0
24.5
25.5
25.5
25.5
25.5
26.0
26.5
27.0
27.5
28.0
28.0
28.5
28.5
28.0
28.5
28.0
28.5
29.5
28.5
29.0
D2
mm
24.0
25.0
25.0
25.0
25.5
25.0
26.0
26.0
26.0
26.0
26.5
27.0
27.5
28.0
28.5
28.5
29.0
29.0
28.5
29.0
28.5
29.0
30.0
29.0
29.5
16.0
17.5
16.5
17.5
19.0
12.5
14.0
13.5
13.0
14.0
14.0
13.5
15.5
16.0
17.0
18.0
17.0
17.0
17.5
17.5
17.5
18.0
18.5
17.5
18.5
0.6B1P-71T
0.8B1P-60T
0.9B1P-42T
0.8B2P-30T
0.9B2P-26T
0.6B1P-92T
0.8B1P-65T
0.8B1P-73T
0.9B1P-46T
0.8B2P-33T
0.9B2P-25T
1.0B2P-18T
0.5B1P-98T
0.6B1P-82T
0.8B1P-59T
0.8B1P-66T
0.9B1P-41T
0.9B1P-46T
0.9B1P-60T
1.0B1P-32T
0.8B2P-33T
1.0B2P-19T
1.0B2P-23T
1.0B3P-10T
1.0B4P-10T
*1 *2
*1 Rated inductance tolerance : P25%, the inductance at current 0[A] indicates the reference value.
*2 The number of turns indicates the reference value.
The specification of the inductance takes precedence over that of the number of turns.
There is a horizontal putting type in all items in the above list."V"changes into "H" in last the third digit of the name of items.
There is a type with the length putting seat in @ item in the above list."V" changes into "D" in last the third digit of the name of items.
There are the type with the length putting seat and the horizontal putting seat in item.
The type with the length putting seat is "V" changes into "B" in last the third digit of the name of items.
*Order the auxiliary pins separately if they are required for the pedestal.
Please select them according to the situation.
Coil Part No.
(Old Coil Part No.)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E(4/5)
?COIL STANDARD SPECIFICATIONS
LACM004401G7-V00
(CM04401G7)
LACM006201G7-V00
(CM06201G7)
LACM006261G7-V00
(CM06261G7)
LACM008101G7-V00
(CM08101G7)
LACM008151G7-V00
(CM08151G7)
LACM008191G7-V00
(CM08191G7)
LACM010101G7-V00
(CM10101G7)
LACM010121G7-V00
(CM10121G7)
LACM015300G7-V00
(CM15300G7)
LACM015500G7-V00
(CM15500G7)
LACM020300G7-V00
(CM20300G7)
LACM025150G7-V00
(CM25150G7)
LACM025200G7-V00
(CM25200G7)
LACM030100G7-V00
(CM30100G7)
LACM030130G7-V00
(CM30130G7)
LACM002192G8-V00
(CM02192G8)
LACM004501G8-V00
(CM04501G8)
LACM005301G8-V00
(CM05301G8)
LACM010151G8-V00
(CM10151G8)
LACM015700G8-V00
(CM15700G8)
LACM020400G8-V00
(CM20400G8)
LACM025250G8-V00
(CM25250G8)
LACM003102G9-V00
(CM03102G9)
LACM005671G9-V00
(CM05671G9)
LACM006301G9-V00
(CM06301G9)
LACM008251G9-V00
(CM08251G9)
LACM010191G9-V00
(CM10191G9)
LACM015850G9-V00
(CM15850G9)
LACM020450G9-V00
(CM20450G9)
LACM025300G9-V00
(CM25300G9)
LACM030200G9-V00
(CM30200G9)
4
6
6
8
8
8
10
10
15
15
20
25
25
30
30
2
4
5
10
15
20
25
3
5
6
8
10
15
20
25
30
420
207
270
108
160
215
110
140
35
55
35
19
26
12
16
1940
510
306
170
75
45
27
1070
745
335
289
220
100
55
35
23
400
200
260
100
150
190
100
120
30
50
30
15
20
10
13
1900
500
300
150
70
40
25
1000
670
300
250
190
85
45
30
20
77
35
41
20
24
33
16
19
7
9
6
4
4
3
3
390
92
58
22
11
7
5
170
75
48
37
21
10
7
4
3
32.0
32.0
32.0
32.5
32.5
32.5
32.5
33.0
32.5
33.0
33.0
33.0
33.0
33.5
34.0
31.0
32.5
33.0
33.0
33.5
33.5
33.5
39.0
40.5
39.5
39.5
41.0
41.0
41.0
42.0
42.0
32.5
32.5
32.5
33.0
33.0
33.0
33.0
33.5
33.0
33.5
33.5
33.5
33.5
34.0
34.5
31.5
33.0
33.5
33.5
34.0
34.0
34.0
39.5
41.0
40.0
40.0
41.5
41.5
41.5
42.5
42.5
18.0
18.0
18.5
18.0
18.5
19.5
18.5
19.5
19.0
19.5
20.0
20.0
20.0
20.0
20.0
22.5
24.0
24.5
25.5
26.0
26.0
26.5
19.0
20.0
19.0
19.0
21.0
21.5
21.5
21.5
22.0
0.9B1P- 57T
0.8B2P- 40T
0.8B2P- 46T
0.9B2P- 29T
0.9B2P- 35T
0.9B2P- 41T
1.0B2P- 29T
1.0B2P- 33T
1.0B3P- 16T
1.0B3P- 21T
1.0B4P- 17T
1.0B5P- 12T
1.0B5P- 14T
1.0B6P- 9T
1.0B6P- 11T
0.6B1P-103T
0.9B1P- 53T
1.0B1P- 41T
1.0B2P- 30T
1.0B3P- 20T
1.0B4P- 16T
1.0B5P- 12T
0.8B1P- 88T
1.1B1P- 75T
0.8B2P- 49T
0.9B2P- 45T
1.1B2P- 41T
1.3B2P- 28T
1.2B3P- 20T
1.2B4P- 17T
1.3B4P- 13T
Inductance (10kHz)
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
*1 *2
Coil Part No.
(Old Coil Part No.)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E(5/5)
?COIL STANDARD SPECIFICATIONS
LACM006501G0-V00
(CM06501G0)
LACM008301G0-V00
(CM08301G0)
LACM010201G0-V00
(CM10201G0)
LACM015900G0-V00
(CM15900G0)
LACM020500G0-V00
(CM20500G0)
LACM025300G0-V00
(CM25300G0)
LACM030250G0-V00
(CM30250G0)
LACM035150G0-V00
(CM35150G0)
LACM040100G0-V00
(CM40100G0)
LACM004102GJ-V00
(CM04102GJ)
LACM005501GJ-V00
(CM05501GJ)
LACM008401GJ-V00
(CM08401GJ)
LACM010301GJ-V00
(CM10301GJ)
LACM015121GJ-V00
(CM15121GJ)
LACM020700GJ-V00
(CM20700GJ)
LACM025500GJ-V00
(CM25500GJ)
LACM030300GJ-V00
(CM30300GJ)
LACM040150GJ-V00
(CM40150GJ)
LACM015201GQ-V00
(CM15201GQ)
LACM020101GQ-V00
(CM20101GQ)
LACM020141GQ-V00
(CM20141GQ)
LACM025700GQ-V00
(CM25700GQ)
LACM035300GQ-V00
(CM35300GQ)
LACM040200GQ-V00
(CM40200GQ)
LACM010501GK-V00
(CM10501GK)
LACM015301GK-V00
(CM15301GK)
LACM015451GK-V00
(CM15451GK)
LACM020201GK-V00
(CM20201GK)
LACM025101GK-V00
(CM25101GK)
LACM030101GK-V00
(CM30101GK)
LACM035500GK-V00
(CM35500GK)
LACM050200GK-V00
(CM50200GK)
LACM060130GK-V00
(CM60130GK)
6
8
10
15
20
25
30
35
40
4
5
8
10
15
20
25
30
40
15
20
20
25
35
40
10
15
15
20
25
30
35
50
60
569
381
255
135
70
38
35
18
16
1080
509
450
380
137
83
60
38
18
255
125
190
79
35
24
530
350
516
250
115
115
60
23
14
500
300
200
90
50
30
25
15
10
1000
500
400
300
120
70
50
30
15
200
100
140
70
30
20
500
300
450
200
100
100
50
20
13
61
38
27
13
8
6
5
4
3
140
74
43
31
14
12
7
4
3
20
12
13
8
5
3
44
24
30
15
9
8
6
3
3
44.0
44.0
45.0
45.0
45.0
45.0
45.5
45.5
46.0
44.0
44.0
44.5
45.0
45.5
45.5
46.0
45.5
46.0
54.0
54.5
55.0
54.5
55.0
55.5
54.5
55.0
55.5
55.0
55.5
55.5
56.0
57.0
57.0
44.5
44.5
45.5
45.5
45.5
45.5
46.0
46.0
46.5
44.5
44.5
45.0
45.5
46.0
46.0
46.5
46.0
46.5
54.5
55.0
55.5
55.0
55.5
56.0
55.0
55.5
56.0
55.5
56.0
56.0
56.5
57.5
57.5
19.5
19.5
20.0
20.0
20.5
20.0
20.5
20.5
20.5
23.0
22.5
24.5
25.0
25.5
25.5
26.0
26.0
26.5
26.0
25.5
27.0
26.0
26.0
26.0
34.5
36.0
36.5
36.0
35.5
36.5
36.5
36.0
36.0
0.8B2P-63T
0.9B2P-50T
1.0B2P-41T
1.0B3P-28T
1.0B4P-20T
1.0B5P-16T
1.0B6P-15T
1.0B7P-11T
1.3B5P- 9T
0.9B1P-71T
1.0B1P-49T
0.9B2P-46T
1.0B2P-40T
1.0B3P-25T
1.0B4P-20T
1.0B5P-17T
1.0B6P-13T
1.3B5P- 9T
1.0B3P-32T
1.0B4P-23T
1.0B4P-28T
1.0B5P-19T
1.0B7P-12T
1.3B5P-10T
1.0B2P-39T
1.0B3P-31T
1.0B3P-38T
1.0B4P-26T
1.0B5P-18T
1.0B6P-18T
1.0B7P-13T
1.3B6P- 8T
1.3B7P- 6T
Inductance (10kHz)
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
*1 *2
Coil Part No.
(Old Coil Part No.)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?COIL STANDARD SPECIFICATIONS
WD2
D1
a
L
Maximum outer diameter :
Maximum width :
Total lead length :
Soldering boundary :
D1(Vertical), D2(Horizontal)
W
L=30mm(+3mm, -3mm)
a=1.5mmMAX
*The bottom of the core or coil ( ) is defined
as base surface.
?MAJOR USES
@Output choke coils for Switching Mode Power Supply
@Choke coils for DC-DC converter
@Normal mode choke coils for noise control
?FEATURES
@Miniaturization in comparison with CM series coils by about 30 percent
@Lineup about the standard from 3 to 30A
@Little inductance fall when overload
mm
Outside Dimensions
D1 W
mm
Coil Part No.
(Old Coil Part No.)
LACM003192JRHV00
(CM03192JR)
LACM005102JRHV00
(CM05102JR)
LACM008511JRHV00
(CM08511JR)
LACM010261JRHV00
(CM10261JR)
LACM015131JRHV00
(CM15131JR)
LACM020790JRHV00
(CM20790JR)
LACM025430JRHV00
(CM25430JR)
LACM030320JRHV00
(CM30320JR)
3
5
8
10
15
20
25
30
2000
1200
600
290
150
92
50
36
1900
1000
510
260
130
79
43
32
290
150
77
38
20
13
7
6
0.9FB1P - 126T
1.1FB1P - 96T
1.3FB1P - 69T
1.1FB2P - 48T
1.3FB2P - 34T
1.2FB3P - 27T
1.2FB4P - 20T
1.3FB4P - 17T
41.5
42.0
42.0
42.0
42.0
42.5
42.5
42.5
D2
mm
41.5
42.0
42.0
42.0
42.0
42.5
42.5
42.5
27.0
28.0
29.5
28.0
29.5
28.5
28.5
29.5
*1 Rated inductance tolerance : P25%, the inductance at current 0[A] indicates the reference value.
*2 The number of turns indicates the reference value.
The specification of the inductance takes precedence over that of the number of turns.
There is a horizontal putting type in all items in the above list."V"changes into "H" in last the third digit of the name of items.
There is a type with the length putting seat in @ item in the above list."V" changes into "D" in last the third digit of the name of items.
There are the type with the length putting seat and the horizontal putting seat in item.
The type with the length putting seat is "V" changes into "B" in last the third digit of the name of items.
*Order the auxiliary pins separately if they are required for the pedestal.
Please select them according to the situation.
Inductance (10kHz)
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
*1
*2
(1/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?D.C. BIAS CHARACTERISTICS
@Core : LNC322015J2, Frequency : 10 kHz
10
100
1000
10000
0102030405060
LACM003192JRHV00
LACM005102JRHV00
LACM008511JRHV00
LACM010261JRHV00
LACM015131JRHV00
LACM020790JRHV00
LACM025430JRHV00
LACM030320JRHV00
D.C. current I [A]
Inductance L [MH]
(2/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?CORE STANDARD SPECIFICATIONS
?MAJOR USES
@Choke coils for Power Factor Corrective circuit
@Normal mode choke coils for noise control
?FEATURES
@Excellent D.C. bias characteristics
@Reduction of core loss in comparison with the conventional CM-series
coils, providing low temperature rises for uses at power of 100V or
larger
@Excellent temperature stability
(1/3)
(C251510J3)
(C603525J2)
(C462725J2)
(C462720J2)
(C372320J2)
(C322020J2)
(C322015J2)
(C251515J2)
LNC251510J3
LNC603525J2
LNC462725J2
LNC462720J2
LNC372320J2
LNC322020J2
LNC322015J2
LNC251515J2
J7H
JLH
JKH
JCH
JBH
JAH
JRH
J8H
28.3
66.7
49.4
49.4
40.5
35.5
35.2
28.3
12.7
29.3
22.7
22.7
19.5
17.0
17.5
12.7
0.100
0.230
0.230
0.193
0.173
0.156
0.122
0.140
0.075
0.166
0.183
0.156
0.140
0.125
0.102
0.113
0.430
2.688
2.043
1.634
1.204
1.032
0.774
0.645
1
1
6.28
14.9
1.5
1.5
9.42
8.17
8.17
6.28
12.3
29.2
28.0
23.0
23.0
23.8
17.3
17.5
430
1300
900
840
700
660
600
460
Outside Dimensions
Abbreviation
Core Part No.
(Old Core Part No.) mmmm
Inductance Coefficient AL Value
I
dc
=0[A]
Rated
Current*
mHmH
Cross
Sectional
Area
cm
2
Magnetic
Path
Length
cm
mm
Rated Current
Ampere Turn
[AT]
Outer
Diameter Width Height
1000
1
100
10
110 100 1000 10000
300[kHz]
200[kHz]
150[kHz]
100[kHz]
80[kHz]
50[kHz]
20[kHz]
Magnetic flux density D Bp-p [mT]
Core loss PFe [mW/g]
?CORE LOSS CHARACTERISTICS
@AM choke
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E(2/3)
0.2
0.1
00 200 400 600 800 1000 1200
NI [AT]
AL [MF]
LNC322020J2
LNC322015J2
LNC251515J2
LNC251510J3
?D.C. BIAS CHARACTERISTICS AL-AT(1)
@Frequency : 100[kHz] @Frequency : 100[kHz]
?D.C. BIAS CHARACTERISTICS AL-AT(2)
120
70
90
80
10 100 1000
100
110
Frequency f [kHz]
Relative value [%]
?FREQUENCY - INDUCTANCE CHARACTERISTICS
@AM choke
?TEMPERATURE DEPENDENCE
- INDUCTANCE AND CORE LOSS
@Frequency : 100[kHz]
140
0
100
60
-20 0 20 40 60 120 140
80 100
80
120
Inductance Rated Current
Idc=0 [A]
Core loss
Temperature [C]
Core loss Relative value [%]
0
0.2
0
LNC603525J2
200 400 600 800 1000 1200 1400 1600 1800
0.1
LNC462725J2
LNC462720J2
LNC372320J2
NI [AT]
AL [MF]
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
(3/3)
?COIL STANDARD SPECIFICATIONS
LAAM002202J7HV00
(AM02202J7H)
LAAM003901J7HV00
(AM03901J7H)
LAAM003152J8HV00
(AM03152J8H)
LAAM004801J8HV00
(AM04801J8H)
LAAM005501J8HV00
(AM05501J8H)
LAAM004102JRHV00
(AM04102JRH)
LAAM005751JRHV00
(AM05751JRH)
LAAM005901JAHV00
(AM05901JAH)
LAAM006651JAHV00
(AM06651JAH)
LAAM005122JBHV00
(AM05122JBH)
LAAM006801JBHV00
(AM06801JBH)
LAAM008501JBHV00
(AM08501JBH)
LAAM008801JCHV00
(AM08801JCH)
LAAM010501JCHV00
(AM10501JCH)
LAAM012351JCHV00
(AM12351JCH)
LAAM010651JKHV00
(AM10651JCH)
LAAM012451JKHV00
(AM12451JKH)
LAAM015301JKHV00
(AM15301JKH)
LAAM012701JLHV00
(AM12701JLH)
LAAM015451JLHV00
(AM15451JLH)
LAAM020251JLHV00
(AM20251JLH)
Inductance
(100kHz)
Rated
Current
A
Peak
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Outside Dimensions
D1
mm W
mm
2
3
3
4
5
4
5
5
6
5
6
8
8
10
12
10
12
15
12
15
20
2.8
4.2
4.2
5.7
7.1
5.7
7.1
7.1
8.5
7.1
8.5
11.3
11.3
14.1
17.0
14.1
17.0
21.2
17.0
21.2
28.3
2400
1100
2000
1100
600
1200
890
1000
740
1500
970
600
1000
600
420
840
590
380
860
550
310
2000
900
1500
800
500
1000
750
900
650
1200
800
500
800
500
350
650
450
300
700
450
250
350
140
230
150
80
160
110
115
87
140
94
53
73
45
33
53
41
26
53
35
20
33.0
33.0
34.0
32.5
33.0
40.5
40.5
40.5
41.0
45.5
45.0
46.5
56.0
54.5
55.0
56.0
55.5
55.5
72.5
72.0
72.5
D2
mm
34.5
34.5
35.5
34.0
34.5
42.0
42.0
42.0
42.5
47.0
46.5
48.0
57.5
56.0
56.5
57.5
57.0
57.0
74.0
73.5
74.0
19.0
19.5
26.0
25.5
28.0
26.5
27.0
32.0
32.5
31.5
30.5
32.0
33.5
32.5
32.0
38.0
38.0
38.0
39.0
40.0
39.0
0.7B1P-155T
0.9B1P-102T
0.85B1P-116T
0.9B1P- 84T
1.1B1P- 65T
1.0B1P-100T
1.1B1P- 85T
1.1B1P- 81T
1.2B1P- 69T
1.1B1P- 92T
1.2B1P- 75T
1.0B2P- 59T
1.0B2P- 72T
1.1B2P- 56T
1.2B2P- 47T
1.1B2P- 61T
1.2B2P- 51T
1.1B3P- 41T
1.2B2P- 61T
1.1B3P- 49T
1.1B4P- 37T
*1
Winding
mmfblines-turns
*2
*1 Rated inductance tolerance : P25%, the inductance at current 0[A] indicates the reference value.
*2 The number of turns indicates the reference value.
The specification of the inductance takes precedence over that of the number of turns.
There is a horizontal putting type in all items in the above list."V"changes into "H" in last the third digit of the name of items.
There is a type with the length putting seat in @ item in the above list."V" changes into "D" in last the third digit of the name of items.
There are the type with the length putting seat and the horizontal putting seat in item.
The type with the length putting seat is "V" changes into "B" in last the third digit of the name of items.
*Order the auxiliary pins separately if they are required for the pedestal.
Please select them according to the situation.
Coil Part No.
(Old Coil Part No.)
WD2
D1
a
L
Maximum outer diameter :
Maximum width :
Total lead length :
Soldering boundary :
D1(Vertical), D2(Horizontal)
W
L=30mm(+3mm, -3mm)
a=1.5mmMAX
*The bottom of the core or coil ( ) is defined
as base surface.
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?MAJOR USES
@For harmonic counter-measure active filter
@Inverter output smoothing choke coil
?FEATURES
@Miniaturization in comparison with AM series coils by about 30 percent
@Excellent d.c. superposition characteristics
?CORE STANDARD SPECIFICATIONS
?D.C. BIAS CHARACTERISTICS AL-AT
@AW core, Frequency : 100[kHz]
0
0.05
0.1
0.15
0 500 1000 1500 2000 2500 3000 3500
AT [A]
AL [MH]
LNW462725J2
LNW603525J2
LNW462725J2
(W462725J2)
WK 49.4 22.7 0.133 0.1062.043 11.5 28.0 1900
LNW603525J2
(W603525J2)
WL 66.7 29.3 0.135 0.1092.688 14.9 29.2 2500
Outside Dimensions
Abbreviation
Core Part No.
(Old Core Part No.) mmmm
Inductance Coefficient AL Value
Idc=0[A]
Rated
Current*
mHmH
Cross
Sectional
Area
cm
2
Magnetic
Path
Length
cm
mm
Rated Current
Ampere Turn
[AT]
Outer
Diameter Width Height
1000
1
100
10
110 100 1000 10000
300[kHz]
200[kHz]
150[kHz]
100[kHz]
80[kHz]
50[kHz]
20[kHz]
Magnetic flux density D Bp-p [mT]
Core loss PFe [mW/g]
?CORE LOSS CHARACTERISTICS
@AW choke
(1/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
LAAW020251WKHV00
(AW20251WKH)
LAAW030101WKHV00
(AW30101WKH)
LAAW040500WKHV00
(AW40500WKH)
LAAW020501WLHV00
(AW20501WLH)
LAAW030201WLHV00
(AW30201WLH)
LAAW040101WLHV00
(AW40101WLH)
20
30
40
20
30
40
28.3
42.4
56.6
28.3
42.4
56.6
270
105
53
546
213
105
250
100
50
500
200
100
20
10
5
35
15
10
1.0B5P - 45T
1.3B4P - 28T
1.5B4P - 20T
1.0B5P - 64T
1.3B4P - 40T
1.5B4P - 28T
59.0
57.0
57.0
78.5
78.5
78.5
59.0
57.0
57.0
78.5
78.5
78.5
41.5
41.5
41.5
46.0
46.0
46.0
*1 Rated inductance tolerance : P25%, the inductance at current 0[A] indicates the reference value.
*2 The number of turns indicates the reference value.
The specification of the inductance takes precedence over that of the number of turns.
There is a horizontal putting type in all items in the above list."V"changes into "H" in last the third digit of the name of items.
There is a type with the length putting seat in @ item in the above list."V" changes into "D" in last the third digit of the name of items.
There are the type with the length putting seat and the horizontal putting seat in item.
The type with the length putting seat is "V" changes into "B" in last the third digit of the name of items.
*Order the auxiliary pins separately if they are required for the pedestal.
Please select them according to the situation.
Inductance
(100kHz)
Rated
Current
A
Peak
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Outside Dimensions
D1
mm W
mm
D2
mm
*1
Winding
mmfblines-turns
*2
Coil Part No.
(Old Coil Part No.)
?COIL STANDARD SPECIFICATIONS
WD2
D1
a
L
Maximum outer diameter :
Maximum width :
Total lead length :
Soldering boundary :
D1(Vertical), D2(Horizontal)
W
L=30mm(+3mm, -3mm)
a=1.5mmMAX
*The bottom of the core or coil ( ) is defined
as base surface.
(2/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?CORE STANDARD SPECIFICATIONS
?MAJOR USES
@Output choke coils for Switching Mode Power Supply
@Choke coils for DC-DC converter
@Normal mode choke coils for noise control
?FEATURES
@Great reduction of core loss enabling low temperature rise at high frequency
@Miniaturization and reduction of DC resistance
@Low leakage flux due to gap-less structure
@Excellent frequency and temperature features
(1/6)
*200[kHz], P25% (LPT100805N : 100[kHz], P25%)
LPT130805N
LPT100805N
LPT322010N
LPT271510N
LPT221310N
LPT191210N
LPT211205N
LPT160910N
LPT150905N
(T130805N)
(T100805N)
(T322010N)
(T271510N)
(T221310N)
(T191210N)
(T211205N)
(T160910N)
(T150905N)
N1
NS
N9
N7
N6
NP
N5
NU
N2
16.0
13.0
35.2
29.7
24.7
21.9
23.2
18.0
17.2
5.8
6.0
17.5
12.5
10.5
9.8
10.2
7.3
7.3
0.120
0.100
0.211
0.253
0.229
0.212
0.126
0.260
0.118
0.070
0.063
0.090
0.120
0.112
0.095
0.060
0.115
0.063
0.13
0.08
0.56
0.53
0.40
0.33
0.21
0.29
0.14
3.44
2.84
8.25
6.60
5.50
4.95
5.26
3.92
3.85
7.4
6.5
12.3
12.3
12.0
11.8
6.9
11.9
6.4
75
70
280
200
160
160
155
120
100
Outside Dimensions
Abbreviation
Core Part No.
(Old Core Part No.) mmmm
Inductance Coefficient AL Value
I
dc
=0[A]
Rated
Current*
mHmH
Cross
Sectional
Area
cm
2
Magnetic
Path
Length
cm
mm
Rated Current
Ampere Turn
[AT]
Outer
Diameter Width Height
1000
1
100
10
110 100 1000 10000
300[kHz]
200[kHz]
150[kHz]
100[kHz]
80[kHz]
50[kHz]
20[kHz]
Magnetic flux density D Bp-p [mT]
Core loss PFe [mW/g]
?CORE LOSS CHARACTERISTICS
@TM choke
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E(2/6)
110
70
90
80
110 100 1000
100
Frequency f [kHz]
Relative value [%]
?FREQUENCY - INDUCTANCE CHARACTERISTICS
@TM choke
?TEMPERATURE DEPENDENCE
- INDUCTANCE AND CORE LOSS
@Frequency : 200[kHz]
140
60
80
0-20 60 80 100 120 1404020
40
100
120
Inductance Rated Current
Idc=0 [A]
Core loss
Temperature [C]
Core loss Relative value [%]
1.0
8
2.0
Magnetic flux density
B [T]
Magnetic field
H [kA/m]
?D.C. BIAS CHARACTERISTICS AL-AT(1)
@Frequency : 200[kHz]
NI [AT]
AL [MH]
0
0.05
0.1
0.15
0.2
0.25
0.3
0 50 100 150 200 250 300 350 400
LPT160910N
LPT130805N
LPT211205N
LPT150905N
AT [A]
AL [MH]
0
0.05
0.1
0.15
0.2
0.25
0.3
0 100 200 300 400 500 600 700
LPT271510N
LPT191210N
LPT221310N
LPT322010N
?D.C. BIAS CHARACTERISTICS AL-AT(2)
@Frequency : 200[kHz]
?B-H CURVE
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E(3/6)
?COIL STANDARD SPECIFICATIONS
LBTM001201NS-V00
(TM01201NS)
LBTM002800NS-V00
(TM02800NS)
LBTM003270NS-V00
(TM03270NS)
LBTM005100NS-V00
(TM05100NS)
LBTM001201N1-V00
(TM01201N1)
LBTM001251N1-V00
(TM01251N1)
LBTM001301N1-V00
(TM01301N1)
LBTM002101N1-V00
(TM02101N1)
LBTM003400N1-V00
(TM03400N1)
LBTM004250N1-V00
(TM04250N1)
LBTM005150N1-V00
(TM05150N1)
LBTM001401N2-V00
(TM01401N2)
LBTM001501N2-V00
(TM01501N2)
LBTM002151N2-V00
(TM02151N2)
LBTM002201N2-V00
(TM02201N2)
LBTM002211N2-V00
(TM02211N2)
LBTM003700N2-V00
(TM03700N2)
LBTM004450N2-V00
(TM04450N2)
LBTM004500N2-V00
(TM04500N2)
LBTM005300N2-V00
(TM05300N2)
LBTM006200N2-V00
(TM06200N2)
1
2
3
5
1
1
1
2
3
4
5
1
1
2
2
2
3
4
4
5
6
260
113
40
14
290
400
430
160
69
43
23
580
770
240
360
400
110
74
92
52
34
200
80
27
10
200
250
300
100
40
25
15
400
500
150
200
210
70
45
50
30
20
120
60
20
9
150
170
170
70
27
18
11
210
230
89
110
110
36
24
24
17
11
16.0
16.5
16.5
17.0
18.5
18.5
18.5
18.5
19.0
19.0
19.5
19.5
20.0
20.0
20.0
20.5
20.5
21.0
21.0
21.0
21.0
16.0
16.5
17.0
17.5
19.0
19.0
19.0
19.0
19.5
19.5
20.0
20.0
20.5
20.5
20.5
21.0
21.0
21.5
21.5
21.5
21.5
11.0
11.0
11.5
11.5
10.5
11.0
11.0
11.0
11.0
11.5
11.5
11.0
11.0
10.5
11.0
11.5
11.5
11.5
11.5
12.0
12.0
0.5B1P-51T
0.6B1P-35T
0.8B1P-20T
1.0B1P-12T
0.5B1P-49T
0.5B1P-58T
0.5B1P-60T
0.6B1P-37T
0.8B1P-24T
0.9B1P-19T
1.0B1P-14T
0.5B1P-70T
0.5B1P-81T
0.6B1P-45T
0.6B1P-55T
0.6B1P-58T
0.8B1P-31T
0.9B1P-25T
0.9B1P-28T
1.0B1P-21T
0.8B2P-17T
*1 Rated inductance tolerance : P25%, the inductance at current 0[A] indicates the reference value.
*2 LBTM001201NS-V00, LBTM002800NS-V00, LBTM003270NS-V00, LBTM005100NS-V00 : 100kHz
*3 The number of turns indicates the reference value.
The specification of the inductance takes precedence over that of the number of turns.
There is a horizontal putting type in all items in the above list."V "changes into "H" in last the third digit of the name of items.
There is a type with the length putting seat in @ item in the above list."V" changes into "D" in last the third digit of the name of items.
There are the type with the length putting seat and the horizontal putting seat in item.
The type with the length putting seat is "V" changes into "B" in last the third digit of the name of items.
*Order the auxiliary pins separately if they are required for the pedestal.
Please select them according to the situation.
Inductance (200kHz)
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
*1 *2 *3
Coil Part No.
(Old Coil Part No.)
WD2
D1
a
L
Maximum outer diameter :
Maximum width :
Total lead length :
Soldering boundary :
D1(Vertical), D2(Horizontal)
W
L=30mm(+3mm, -3mm)
a=1.5mmMAX
*The bottom of the core or coil ( ) is defined
as base surface.
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E(4/6)
?COIL STANDARD SPECIFICATIONS
LBTM001132N5-V00
(TM01132N5)
LBTM003800N5-V00
(TM03800N5)
LBTM003171N5-V00
(TM03171N5)
LBTM005750N5-V00
(TM05750N5)
LBTM006450N5-V00
(TM06450N5)
LBTM008250N5-V00
(TM08250N5)
LBTM010160N5-V00
(TM10160N5)
LBTM015080N5-V00
(TM15080N5)
LBTM002351NU-V00
(TM02351NU)
LBTM003131NU-V00
(TM03131NU)
LBTM005500NU-V00
(TM05500NU)
LBTM008170NU-V00
(TM08170NU)
LBTM002621NP-V00
(TM02621NP)
LBTM003291NP-V00
(TM03291NP)
LBTM004161NP-V00
(TM04161NP)
LBTM005101NP-V00
(TM05101NP)
LBTM006700NP-V00
(TM06700NP)
LBTM008400NP-V00
(TM08400NP)
LBTM010270NP-V00
(TM10270NP)
LBTM015120NP-V00
(TM15120NP)
1
3
3
5
6
8
10
15
2
3
5
8
2
3
4
5
6
8
10
15
2100
120
290
150
85
45
28
15
650
217
87
29
1200
550
320
190
130
77
54
26
1300
80
170
75
45
25
16
8
350
130
50
17
620
290
160
100
70
40
27
12
400
41
59
27
18
11
7
4
135
44
19
7
150
76
46
29
19
12
7
4
26.0
26.5
26.5
27.0
27.0
27.0
28.0
27.5
22.0
22.5
22.5
22.5
24.5
24.5
25.0
25.0
24.5
25.0
26.0
26.0
26.0
26.5
26.5
27.0
27.0
27.0
28.0
27.5
22.0
22.5
22.5
22.5
24.5
24.5
25.0
25.0
24.5
25.0
26.0
26.0
12.0
11.0
12.0
13.5
13.0
13.5
14.0
14.5
16.5
17.0
16.5
16.5
16.5
16.0
16.5
16.5
16.0
16.5
17.0
17.5
0.5B1P-127T
0.8B1P-30T
0.8B1P-48T
1.0B1P-35T
0.8B2P-26T
0.9B2P-19T
1.1B2P-15T
1.1B3P-11T
0.6B1P-52T
0.8B1P-30T
1.0B1P-19T
0.9B2P-11T
0.7B1P-76T
0.8B1P-51T
0.9B1P-39T
1.0B1P-30T
0.8B2P-25T
0.9B2P-19T
1.1B2P-16T
1.1B3P-11T
Inductance (200kHz)
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
*1 *2 *3
Coil Part No.
(Old Coil Part No.)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E(5/6)
?COIL STANDARD SPECIFICATIONS
LBTM002701N6-V00
(TM02701N6)
LBTM003181N6-V00
(TM03181N6)
LBTM003351N6-V00
(TM03351N6)
LBTM004101N6-V00
(TM04101N6)
LBTM004201N6-V00
(TM04201N6)
LBTM005131N6-V00
(TM05131N6)
LBTM006850N6-V00
(TM06850N6)
LBTM008450N6-V00
(TM08450N6)
LBTM010300N6-V00
(TM10300N6)
LBTM015160N6-V00
(TM15160N6)
LBTM020100N6-V00
(TM20100N6)
LBTM002901N7-V00
(TM02901N7)
LBTM002112N7-V00
(TM02112N7)
LBTM003481N7-V00
(TM03481N7)
LBTM005141N7-V00
(TM05141N7)
LBTM005211N7-V00
(TM05211N7)
LBTM010300N7-V00
(TM10300N7)
LBTM010500N7-V00
(TM10500N7)
LBTM015260N7-V00
(TM15260N7)
LBTM025100N7-V00
(TM25100N7)
LBTM003501N9-V00
(TM03501N9)
LBTM005281N9-V00
(TM05281N9)
LBTM005301N9-V00
(TM05301N9)
LBTM010600N9-V00
(TM10600N9)
LBTM010800N9-V00
(TM10800N9)
LBTM015400N9-V00
(TM15400N9)
LBTM020130N9-V00
(TM20130N9)
LBTM020200N9-V00
(TM20200N9)
2
3
3
4
4
5
6
8
10
15
20
2
2
3
5
5
10
10
15
25
3
5
5
10
10
15
20
20
1200
260
640
140
370
250
170
83
51
33
23
1500
1800
820
240
390
45
100
57
25
840
530
550
110
170
93
21
41
700
180
350
100
200
130
85
45
30
16
10
900
1100
480
140
210
30
50
26
10
500
280
300
60
80
40
13
20
150
50
82
33
48
34
22
13
7
5
4
240
190
94
34
42
7
11
6
3
120
61
62
12
15
8
4
5
27.5
27.5
27.5
27.5
28.0
28.5
28.0
28.0
29.0
28.5
29.5
32.0
32.5
32.5
33.0
33.0
35.5
34.0
33.5
35.5
38.5
39.5
39.5
41.5
41.0
39.5
41.0
40.5
28.0
28.0
28.0
28.0
28.5
29.0
28.5
28.5
29.5
29.0
30.0
32.5
33.0
33.0
33.5
33.5
36.0
34.5
34.0
36.0
39.0
40.0
40.0
42.0
41.5
40.0
41.5
41.0
16.5
15.0
16.5
16.0
16.5
17.0
17.0
17.0
17.5
18.5
19.0
15.5
16.5
16.5
16.0
17.5
18.5
18.0
18.0
19.0
18.5
19.0
19.0
20.0
20.5
20.0
19.5
20.5
0.7B1P-73T
0.8B1P-33T
0.8B1P-53T
0.9B1P-25T
0.9B1P-40T
1.0B1P-33T
0.8B2P-27T
0.9B2P-19T
1.1B2P-15T
1.1B3P-12T
1.3B3P-10T
0.6B1P-73T
0.7B1P-85T
0.8B1P-57T
1.0B1P-31T
1.0B1P-39T
1.6B1P-13T
1.1B2P-20T
1.1B3P-15T
1.6B2P-10T
0.8B1P-63T
1.0B1P-50T
1.0B1P-51T
1.6B1P-23T
1.1B2P-28T
1.1B3P-21T
1.3B3P-10T
1.3B3P-14T
Inductance (200kHz)
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
*1 *2 *3
Coil Part No.
(Old Coil Part No.)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
Upgrade
(6/6)
?CORE STANDARD SPECIFICATIONS
?MAJOR USES
@Output choke coils for Switching Mode Power Supply
@Choke coils for DC-DC converter
@Normal mode choke coils for noise control
?FEATURES
@Excellent ANTI-VIBRATION DEVICE. Insulation for substrate
@Miniaturization and reduction of DC resistance
@Low leakage flux due to gap-less structure
@Excellent frequency and temperature features
@Pb free
(Base specifications with pins)
?OVERALL DIMENSIONS DIAGRAM
9.5mm
W
D2
D1
a
@
Fig1
11.0mm
W
D2
D1
a
@
Fig2
14mm
W
D2
D1
a
@
Fig3
LBTM2R2171N2-Y0E
(TM02201N2ZDGPBF)
LBTM005750N5-Y0E
(TM05750N5DGPBF)
LBTM005131NPAY0E
(TM05131NPZDGPBF)
2.2
5
5
400
150
410
170
75
130
96
27
40
24.5
31.0
28.5
21.5
28.5
26.5
12.5
15.0
18.0
Fig-1
Fig-2
Fig-3
0.7B1P-58T
1.0B1P-35T
1.1B1P-44T
*1 Rated inductance tolerance : P25%, the inductance at current 0[A] indicates the reference value.
*2 The number of turns indicates the reference value.
The specification of the inductance takes precedence over that of the number of turns.
Inductance (200kHz)
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Outside Dimensions
D1
mm W
mm
Dimensions
D2
mm
*1
Winding
mmfblines-turns
*2
Coil Part No.
(Old Coil Part No.)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?CORE STANDARD SPECIFICATIONS
?MAJOR USES
@Output choke coils for Switching Mode Power Supply
@Choke coils for DC-DC converter
@Normal mode choke coils for noise control
?FEATURES
@Miniaturization in comparison with TM series coils
@High inductance in low load current
@Low leakage flux due to gap-less structure
(1/4)
LPB150905N
(B150905N)
LPB190910N
(B190910N)
LPB221310N
(B221310N)
LPB251510N
(B251510N)
LPB251515N
(B251515N)
LPB322015N
(B322015N)
LPB372315N
(B372315N)
LPB462715N
(B462715N)
LPB462720N
(B462720N)
X2
XU
X6
X7
X8
XR
XJ
XQ
XC
0.140
0.447
0.396
0.430
0.645
0.774
0.924
1.254
1.634
3.85
4.49
5.50
6.28
6.28
8.17
9.42
11.50
11.50
17.2
21.6
24.7
28.3
28.3
35.2
40.5
49.4
49.4
7.3
7.3
10.5
12.7
12.7
17.5
19.5
22.7
22.7
6.4
11.9
12.0
12.3
17.5
17.3
18.0
18.0
23.0
0.079
0.248
0.153
0.153
0.226
0.229
0.209
0.232
0.310
0.047
0.100
0.065
0.068
0.091
0.091
0.096
0.084
0.112
100
200
240
270
300
350
375
600
600
*200[kHz], P25%
Outside Dimensions
Abbreviation
Core Part No.
(Old Core Part No.) mmmm
Inductance Coefficient AL Value
Idc=0[A] Rated
Current*
mHmH
Cross
Sectional
Area
cm
2
Magnetic
Path
Length
cm mm
Rated Current
Ampere Turn
[AT]
Outer
Diameter Width Height
1000
1
100
10
110 100 1000 10000
300[kHz]
200[kHz]
150[kHz]
100[kHz]
80[kHz]
50[kHz]
20[kHz]
Magnetic flux density D Bp-p [mT]
Core loss PFe [mW/g]
?CORE LOSS CHARACTERISTICS
@BM choke
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E(2/4)
?FREQUENCY - INDUCTANCE CHARACTERISTICS
@BM choke
?TEMPERATURE DEPENDENCE
- INDUCTANCE AND CORE LOSS
@Frequency : 200[kHz]
140
60
80
0-20 60 80 100 120 1404020
40
100
120
Inductance Rated Current
Idc=0 [A]
Core loss
Temperature [C]
Core loss Relative value [%]
1.0
8
2.0
Magnetic flux density
B [T]
Magnetic field
H [kA/m]
?D.C. BIAS CHARACTERISTICS AL-AT(1)
@Frequency : 200[kHz]
NI [AT]
AL [MH]
LPB221310N
0
0.05
0.1
0.15
0.2
0.25
0.3
0 100 200 300 400 500 600
LPB190910N
LPB251510N
LPB150905N
?B-H CURVE
110
70
90
80
110 100 1000
100
Frequency f [kHz]
Relative value [%]
?D.C. BIAS CHARACTERISTICS AL-AT(2)
@Frequency : 200[kHz]
NI [AT]
AL [MH]
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0 100 200 300 400 500 600 700 800 900 1000 1100
LPB322015N LPB372315N
LPB462715N
LPB462720N
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E(3/4)
LBBM003421X6-V00
(BM03421X6)
LBBM005161X6-V00
(BM05161X6)
LBBM008600X6-V00
(BM08600X6)
LBBM010300X6-V00
(BM10300X6)
LBBM015150X6-V00
(BM15150X6)
LBBM020100X6-V00
(BM20100X6)
LBBM025060X6-V00
(BM25060X6)
LBBM0303R6X6-V00
(BM30040X6)
LBBM003551X7-V00
(BM03551X7)
LBBM005201X7-V00
(BM05201X7)
LBBM008800X7-V00
(BM08800X7)
LBBM010500X7-V00
(BM10500X7)
LBBM015270X7-V00
(BM15270X7)
LBBM020150X7-V00
(BM20150X7)
LBBM025090X7-V00
(BM25090X7)
LBBM030070X7-V00
(BM30070X7)
LBBM035050X7-V00
(BM35050X7)
LBBM0403R4X7-V00
(BM40030X7)
3
5
8
10
15
20
25
30
3
5
8
10
15
20
25
30
35
40
1100
360
140
62
35
23
13
7.6
1400
460
180
110
62
35
22
16
12
7.6
420
160
60
30
15
10
6
3.6
550
200
80
50
27
15
9
7
5.0
3.4
130
55
20
11
6
4
2
2
150
60
23
16
8
5
3
3
3
2
29.0
29.0
29.0
29.0
29.5
29.5
30.0
31.0
32.5
32.0
32.5
32.5
33.0
33.5
33.5
34.5
34.0
35.0
29.0
29.0
29.0
29.0
29.5
29.5
30.0
31.0
32.5
32.5
33.0
33.0
33.5
33.5
33.5
34.5
34.0
35.0
17.5
18.0
18.0
18.0
18.5
18.5
19.0
19.5
18.0
18.0
18.5
18.5
19.0
20.0
21.0
21.0
21.0
21.0
0.8B1p - 80T
1.0B1p - 48T
0.9B2p - 30T
1.0B2p - 20T
1.0B3p - 15T
1.0B4p - 12T
1.2B4p - 9T
1.3B4p - 7T
0.8B1p - 90T
1.0B1p - 54T
0.9B2p - 34T
1.0B2p - 27T
1.0B3p - 20T
1.2B3p - 15T
1.2B4p - 12T
1.3B4p - 10T
1.4B4p - 9T
1.4B5p - 7T
*1 Rated inductance tolerance : P25%, the inductance at current 0[A] indicates the reference value.
*2 The number of turns indicates the reference value.
The specification of the inductance takes precedence over that of the number of turns.
There is a horizontal putting type in all items in the above list."V "changes into "H" in last the third digit of the name of items.
There is a type with the length putting seat in @ item in the above list."V" changes into "D" in last the third digit of the name of items.
There are the type with the length putting seat and the horizontal putting seat in item.
The type with the length putting seat is "V" changes into "B" in last the third digit of the name of items.
*Order the auxiliary pins separately if they are required for the pedestal.
Please select them according to the situation.
Inductance (200kHz)
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
*1 *2
Coil Part No.
(Old Coil Part No.)
?COIL STANDARD SPECIFICATIONS
WD2
D1
a
L
Maximum outer diameter :
Maximum width :
Total lead length :
Soldering boundary :
D1(Vertical), D2(Horizontal)
W
L=30mm(+3mm, -3mm)
a=1.5mmMAX
*The bottom of the core or coil ( ) is defined
as base surface.
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E(4/4)
?COIL STANDARD SPECIFICATIONS
LBBM003801X8-V00
(BM03801X8)
LBBM005351X8-V00
(BM05351X8)
LBBM008121X8-V00
(BM08121X8)
LBBM010750X8-V00
(BM10750X8)
LBBM015350X8-V00
(BM15350X8)
LBBM020210X8-V00
(BM20210X8)
LBBM025130X8-V00
(BM25130X8)
LBBM030090X8-V00
(BM30090X8)
LBBM0357R5X8-V00
(BM35070X8)
LBBM040050X8-V00
(BM40050X8)
LBBM003122XR-V00
(BM03122XR)
LBBM005481XR-V00
(BM05481XR)
LBBM008191XR-V00
(BM08191XR)
LBBM010121XR-V00
(BM10121XR)
LBBM015570XR-V00
(BM15570XR)
LBBM020310XR-V00
(BM20310XR)
LBBM025200XR-V00
(BM25200XR)
LBBM030140XR-V00
(BM30140XR)
LBBM0359R5XR-V00
(BM35100XR)
LBBM0406R5XR-V00
(BM40070XR)
LBBM0454R9XR-V00
(BM45050XR)
3
5
8
10
15
20
25
30
35
40
3
5
8
10
15
20
25
30
35
40
45
1800
840
280
170
84
52
33
23
20
12
2800
1100
460
280
140
74
51
33
23
15
11
800
350
120
75
35
21
13
9
7.5
5.0
1200
480
190
120
57
31
20
14
9.5
6.5
4.9
185
85
30
17
9
6
4
3
3
2
155
100
40
22
13
7
5
4
3
2
2
33.0
34.0
34.0
34.0
34.5
34.0
35.0
35.5
35.0
36.5
41.5
41.0
41.5
40.5
41.5
42.0
41.5
42.0
42.0
42.5
42.5
33.0
34.0
34.0
34.0
34.5
34.0
35.0
35.5
35.0
36.5
41.5
41.0
41.5
40.5
41.5
42.0
41.5
42.0
42.0
42.5
42.5
24.5
24.5
24.5
25.5
25.0
26.0
26.0
27.0
27.5
26.5
26.5
25.5
25.5
26.0
26.0
26.0
26.0
27.0
26.0
26.5
26.5
0.8B1P - 88T
1.0B1p - 60T
1.3B1p - 35T
1.1B2p - 27T
1.3B2p - 19T
1.2B3p - 15T
1.2B4p - 12T
1.3B4p - 10T
1.4B4p - 9T
1.4B5p - 7T
1.0B1p -100T
1.1B1p - 70T
1.3B1p - 45T
1.1B2p - 35T
1.3B2p - 25T
1.2B3p - 18T
1.2B4p - 15T
1.3B4p - 12T
1.4B4p - 10T
1.4B5p - 8T
1.3B6p - 7T
Inductance (200kHz)
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
*1 *2
Coil Part No.
(Old Coil Part No.)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?MAJOR USES
@Car audio for Alternator noise prevension
?FEATURES
@Miniaturization in comparison with ferrite choke coil and dust choke coil
@Miniaturization and reduction of DC resistance
@Low leakage flux due to gap-less structure
?CORE STANDARD SPECIFICATIONS
LQE110705S
LQE160908S
LQE160910S
LQE181110S
LQE191006U
(E110705S)
(E160908S)
(E160910S)
(E181110S)
(E191006U)
SS
SW
SU
S3
SV
0.090
0.234
0.300
0.301
0.227
2.97
3.92
3.92
4.56
4.52
13.0
18.4
18.0
20.2
20.5
5.9
6.9
7.3
8.8
8.4
6.5
10.3
11.9
11.8
7.1
0.160
0.674
1.190
0.871
0.430
0.120
0.495
0.713
0.775
0.297
30
36
29
23
51
Outside Dimensions
Abbreviation
Core Part No.
(Old Core Part No.) mmmm
Inductance Coefficient AL Value
Idc=0[A] Rated
Current*
mHmH
Cross
Sectional
Area
cm2
Magnetic
Path
Length
cm mm
Rated Current
Ampere Turn
[AT]
Outer
Diameter Width Height
*1[kHz], +50%, -25%
(1/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
(EM01471SW)
(EM02151SW)
LCEM001471SW-V00
LCEM002151SW-V00
1
2
567
195
352
112
33
20
0.9B1P - 29T
1.0B1P - 17T
22.5
23.5
22.5
23.5
15.5
16.0
*1 Rated inductance minimum value, the inductance at current 0[A] indicates the reference value.
*2 The number of turns indicates the reference value.
The specification of the inductance takes precedence over that of the number of turns.
There is a horizontal putting type in all items in the above list.
"V"changes into "H" in last the third digit of the name of items.
There is a type with the length putting seat in @ item in the above list.
"V" changes into "D" in last the third digit of the name of items.
*Order the auxiliary pins separately if they are required for the pedestal.
Inductance (1kHz)
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
*1 *2
Coil Part No.
(Old Coil Part No.)
?COIL STANDARD SPACIFICATIONS
?D.C. BIAS CHARACTERISTICS
@Core : LQE160908S, Frequency : 1 [kHz]
0
100
200
300
400
500
600
0 0.5 1 1.5 2 2.5 3 3.5 4
D.C. current I [A]
Inductance L [MH]
LCEM001471SW-V00
LCEM002151SW-V00
WD2
D1
a
L
Maximum outer diameter :
Maximum width :
Total lead length :
Soldering boundary :
D1(Vertical), D2(Horizontal)
W
L=30mm(+3mm, -3mm)
a=1.5mmMAX
*The bottom of the core or coil ( ) is defined
as base surface.
(2/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?MAJOR USES
@Choke coils for DC-DC converter
@Output choke coils for Switching Mode Power Supply
?FEATURES
@Minimum device thickness of 6.8 mm with high D.C. rated current
@Remarkably small of D.C. resistance in this type of device
@Use of Fe-base amorphous for excellent operation stability at high temperature
@Preparation of both SMD and SIP type
?GENERAL SPECIFICATION
?PART NUMBER DESIGNATIONS
Solder control code6
Specifications control code5
Package Method4
Lead side3
Lead number2
Lead shape1
Core type
Series
Section code
Class code
L E S M 5 F 2 J L 3 2 L 0 0
13426789105121311 14
Specifications
Standard
Custom
Code
0
1
Lead shape
SMD type(Vertical)
SMD type(Horizontal)
SIP type(Vertical)
SIP type(Horizontal)
Code
S
L
U
G
1Lead shape
Laad number
2
3
4
Code
2
3
4
2Lead number Lead side
One Side
Two Side
Code
1
2
3Lead side Contents
Taping
Standard tray
Others
Code
T
L
N
4Package Method
5Specifications control code Specifications
Standard solder
Pb free
Code
0
E
6Solder control code
?STANDARD DIMENSION DIAGRAM (mm)
*1 Temperature on the coil surface including the increase in self-temperature in installation.
*2 When infra-acoustic frequency component is impressed, a beat sound some times occur.
*3 Increase in the temperature on the coil surface during the flow of the rated D.C. current.
*4 Housing case material.
Operating Temperature Range
Storage Temperature Range
Operating Humidity Range
Storage Humidity Range
Operating Frequency Range
Increase in Temperature
Insulating Type
Incombustibility
Items
-25 to 130C
-25 to 130C
20 to 95%RH
20 to 80%RH
20kHz to 500kHz
45 deg. or less
Type B (130C)
UL94V-0
Rated value
*1
*2
*3
*4
@SMD type : LESM5F2JL32L00
LESM5F2HL32L00
19.0
7.4
22.0
5.8 13.0
@SIP type : LESM5F2JU21L00
13.5
5.8
6.8
23.06
Lead phase : F1.2
@SIP type : LESMCA4JU21L0E, LESMCA4HU21L0E
27.7
25.9
14.0
12.9
4.5
LESMCA4JU21L0E
LESMCA4HU21L0E
Lead phase
3B5
F3.2
@SIP type : LESMBA2HU21L0E
4.5
8.8
26.5
13.9
4-R5
18.9
Lead phase : F3.2
(1/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?COIL STANDARD SPECIFICATIONS
1000
1
100
10
110 100 1000 10000
500[kHz]
400[kHz]
300[kHz]
200[kHz]
150[kHz]
100[kHz]
80[kHz]
Magnetic flux density D Bp-p[mT]
Core loss PFe [mW/g]
?FREQUENCY - INDUCTANCE CHARACTERISTICS
110
30
80
50
110 100 1000 10000
90
100
60
70
40
Frequency f [kHz]
Relative value [%]
?CORE LOSS CHARACTERISTICS
0 20406080100
D.C. current I [A]
Inductance L [MH]
0
1
2
3
4
5
6
LESM5F2JL32L00
LESMCA4JU21L0E
LESM5F2HL32L00
?D.C. BIAS CHARACTERISTICS (1)
LESM5F2JU21L00
(SM5F2JU21)
LESM5F2JL32L00
(SM5F2JL32)
LESM5F2HL32L00
(SM5F2HL32)
LESMCA4HU21L0E
(SMCA4HU21ZPBF)
LESMBA2HU21L0E
(SMBA2HU21ZPBF)
LESMCA4JU21L0E
(SMCA4JU21PBF)
10
10
20
30
35
70
4.8
4.8
1.2
3.5
1.2
1.6
2.6
2.6
0.9
2.2
0.9
0.9
1.0
1.0
1.0
0.3
0.3
0.2
Vertical
Horizontal
Horizontal
Vertical
Vertical
Vertical
13.5
22.0
22.0
27.7
18.9
27.7
6.8
13.0
13.0
14.0
13.9
14.0
23.0
7.4
7.4
25.9
26.5
25.9
Inductance
Rated
Current
A0[A]
mHRating
mH
D.C.R.
mo
(max)
Mounting
Direction
Outside Dimensions
r
mm h
mm
w
mm
*1
Coil Part No.
(Old Coil Part No.)
*Inductance measurement condition : 100kHz (SMCA4HU21Z, SMBA2HU21Z : 200kHz)
The inductance at current 0[A] indicates the reference value.
The item preceded by symbol @ Pb free only.
0
0
1
2
3
4
5
10 20 30 40
D.C. current I [A]
Inductance L [MH]
LESMCA4HU21L0E
LESMBA2HU21L0E
?D.C. BIAS CHARACTERISTICS (2)
@Frequency : 100[kHz] @Frequency : 200[kHz]
(2/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
The FM series coils are made of nano-crystal.
?MAJOR USES
@Signal power line noise control
@DC power line noise control
@AC power line noise control
?FEATURES
@The high permeability core is made of nano-crystal
@High impedance in spite of a small number of turns
@Excellent temperature characteristics
@Conforming to insulating type B and incombustibility UL94V-0
?CORE STANDARD SPECIFICATIONS
(F251515MK)
(F322015MK)
(F372315MK)
(F462725MK)
(F603525MK)
(F624520MK)
LRF251515MK
LRF322015MK
LRF372315MK
LRF462725MK
LRF603525MK
LRF624520MK
M8K
MRK
MJK
MKK
MLK
MLCH
0.63
0.73
0.85
1.92
2.53
1.36
6.40
8.17
9.42
11.50
14.90
16.80
28.3
35.2
40.5
49.4
66.7
66.0
12.7
17.5
19.5
22.7
29.3
41.0
17.5
17.3
18.0
28.0
29.2
24.0
18.3
16.6
17.2
31.0
31.6
15.2
Outside Dimensions
Abbreviation
Core Part No.
(Old Core Part No.)
mmmm
Inductance Coefficient AL Value
Idc=0[A]
mH (100kHz)
Cross
Sectional
Area
cm
2
Magnetic
Path
Length
cm
mm
Outer
Diameter Width Height
(1/4)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?FREQUENCY - IMPEDANCE CHARACTERISTICS (1)
@LRF251515MK
Frequency f [kHz]
Impedance Z [O]
0.1
1
10
100
1000
10000
1 10 100 1000 10000
N = 5T
N = 3T
N = 2T
N = 1T
?FREQUENCY - IMPEDANCE CHARACTERISTICS (2)
@LRF372315MK
0.1
1
10
100
1000
10000
1 10 100 1000 10000
N = 5T
N = 3T
N = 2T
N = 1T
Frequency f [kHz]
Impedance Z [O]
?FREQUENCY - IMPEDANCE CHARACTERISTICS (3)
@LRF462725MK
0.1
1
10
100
1000
10000
1 10 100 1000 10000
N = 5T
N = 3T
N = 2T
N = 1T
Frequency f [kHz]
Impedance Z [O]
?FREQUENCY - IMPEDANCE CHARACTERISTICS (4)
@LRF624520MK
0.1
1
10
100
1000
10000
1 10 100 1000 10000
N = 5T
N = 3T
N = 2T
N = 1T
Frequency f [kHz]
Impedance Z [O]
100000
1000
10 110 100 1000
100
10000
1000000
FMseries
Frequency f [kHz]
Permeability
?FREQUENCY - PERMEABILITY CHARACTERISTICS ?ATTENUATION CHARACTERISTICS
40
0
20
10 100 1000 10000
LDFM010103MJ-V00
LDFM010502MR-V00
LDFM010302MT-V00
LDFM015102MT-V00
10
30
50
100000
Frequency f [kHz]
Attenuation [dB]
(2/4)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?COIL STANDARD SPECIFICATIONS
There is a horizontal putting type in all items in the above list.
"V" changes into "H" in last the third digit of the name of items.
Rating
mHmH
LDFM001802MS-V00
(FM01393MS)
LDFM002302MS-V00
(FM02173MS)
LDFM003152MS-V00
(FM03872MS)
LDFM005302MT-V00
(FM05302MT)
LDFM005502MT-V00
(FM05502MT)
LDFM005103MR-V00
(FM05103MR)
LDFM010102MT-V00
(FM10102MT)
LDFM010302MT-V00
(FM10302MT)
LDFM010502MR-V00
(FM10502MR)
LDFM010103MJ-V00
(FM10103MJ)
LDFM015102MT-V00
(FM15102MT)
LDFM015302MR-V00
(FM15302MR)
LDFM015502MJ-V00
(FM15502MJ)
LDFM020102MR-V00
(FM20102MR)
LDFM020302MJ-V00
(FM20302MJ)
LDFM025252MJ-V00
(FM25252MJ)
LDFM030102MR-V00
(FM30102MR)
LDFM030202MJ-V00
(FM30202MJ)
LRF110705M
(F110705M)
LRF110705M
(F110705M)
LRF110705M
(F110705M)
LRF281510M
(F281510M)
LRF281510M
(F281510M)
LRF322015M
(F322015M)
LRF281510M
(F281510M)
LRF281510M
(F281510M)
LRF322015M
(F322015M)
LRF372315M
(F372315M)
LRF281510M
(F281510M)
LRF322015M
(F322015M)
LRF372315M
(F372315M)
LRF322015M
(F322015M)
LRF372315M
(F372315M)
LRF372315M
(F372315M)
LRF322015M
(F322015M)
LRF372315M
(F372315M)
8.0
3.0
1.5
3.0
5.0
10.0
1.0
3.0
5.0
10.0
1.0
3.0
5.0
1.0
3.0
2.5
1.0
2.0
28.0
11.6
5.6
13.0
23.0
39.0
5.8
13.0
24.0
46.5
3.7
15.0
24.8
4.2
13.5
11.6
4.2
9.9
15.0
15.0
15.0
34.0
34.5
39.0
34.0
36.0
40.0
46.5
34.5
40.0
47.0
42.5
46.5
47.0
39.5
47.0
15.0
15.0
15.0
36.0
36.5
41.0
38.0
38.0
43.0
47.5
38.0
42.5
49.0
43.0
48.0
49.0
44.0
48.5
11.9
11.9
11.9
20.0
20.5
25.5
22.0
22.0
27.0
27.5
20.5
29.0
28.0
28.0
30.0
31.0
29.5
31.0
0.35B1p - 36T
0.45B1p - 23T
0.55B1p - 16T
1.1 B1p - 15T
1.1 B1p - 20T
1.1 B1p - 26T
1.5 B1p - 10T
1.4 B1p - 15T
1.5 B1p - 19T
1.5 B1p - 26T
1.6 B1p - 8T
1.8 B1p - 15T
1.8 B1p - 19T
1.5 B2p - 8T
1.5 B2p - 14T
1.6 B2p - 13T
1.7 B2p - 8T
1.7 B2p - 12T
350
150
70
17
23
33
8
11
15
20
6
10
11
5
7
5
5
6
100kHz10kHz
Typical
1
2
3
5
5
5
10
10
10
10
15
15
15
20
20
25
30
30
Inductance
Rated
Current
A
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
Coil Part No.
(Old Coil Part No.) Core Part No.
(Old Core Part No.)
D2 W
L
a
D1
Maximum outer diameter :
Maximum width :
Total lead length :
Soldering boundary :
D1(Vertical), D2(Horizontal)
W
L=30mm(+3mm, -3mm)
a=1.5mmMAX
*The bottom of the core or coil ( ) is defined
as base surface.
The FM series coils are made of nano-crystal.
?MAJOR USES
@Signal power line noise control
@DC power line noise control
@AC power line noise control
?FEATURES
@The high permeability core is made of nano-crystal
@High impedance in spite of a small number of turns
@Excellent temperature characteristics
@Conforming to insulating type B and incombustibility UL94V-0
(3/4)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
The FM series coils are made of nano-crystal.
?MAJOR USES
@Common mode coils for noise filter in inverter or
large capacity power supply
?FEATURES
@Small profile, light through adoption of high permeability core
@High inductance in spite of a small number of turns
@Low temperature rise and, low D.C. resistance
@Stable frequency performance of noise suppression
in wide frequency range
@Excellent temperature characteristics
@Conforming to insulating type B and incombustibility UL94V-0
Upgrade!
D2
W
L
a
D1
Maximum outer diameter :
Maximum width :
Total lead length* :
Soldering boundary* :
D1(Vertical), D2(Horizontal)
W
L=15mm(+5mm, -5mm)
a=1.5mmMAX
*The bottom of the core or coil ( ) is defined
as base surface.
?COIL STANDARD SPECIFICATIONS
?FREQUENCY - IMPEDANCE CHARACTERISTICS
0.01
0.1
1
10
100
1 10 100 1000 10000
Frequency f [kHz]
Impedance Z [kO]
LDFM015802MGQH00
LDFM025282MGQH00
LDFM020402MGQH00
LDFM030172MGQH00
LDFM015802MGQH00
(FM15802MGQ)
LDFM020402MGQH00
(FM20402MGQ)
LDFM025282MGQH00
(FM25282MGQ)
LDFM030172MGQH00
(FM30172MGQ)
15
20
25
30
30.0
16.0
10.0
7.0
8.0
4.0
2.8
1.7
15
6
5
4
2.0B1P
2.3B1P
1.8B2P
2.0B2P
65.0
65.0
65.0
65.0
65.0
65.0
65.0
65.0
35.0
35.0
35.0
35.0
LRF503415MQ
(F503415MQ)
LRF503415MQ
(F503415MQ)
LRF503415MQ
(F503415MQ)
LRF503415MQ
(F503415MQ)
Rating
mHmH
100kHz10kHz
Typical
Inductance
Rated
Current
A
D.C.R.
mo
(max)
Winding
mmfblines-turns
Outside Dimensions
D1
mm W
mm
D2
mm
Coil Part No.
(Old Coil Part No.) Core Part No.
(Old Core Part No.)
(4/4)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?
Accessories used for choke coils of upright type
G6
G7
G8
J7H
J8H
N6
N7
X6
X7
X8
P/N of available core
Distance between
adjacent pin holes
The hole numbers are
arranged based on the
center notch.
Pitch between adjacent lead insertion holes: 2.5mm
Pitch between adjacent lead
insertion holes: 17.5mm
25
R17
10
31
20
109 8 7 6
12345
555
8 - 0.8F pin hole
10 - 1.5F drill hole
SIDE VIEW
BOTTOM VIEW
Pedestal (P/N XD3415VW)
G9
G0
GJ
JRH
JAH
JBH
N9
XR
P/N of available core
Distance between
adjacent pin holes
The hole numbers are
arranged based on the
center notch.
Pitch between adjacent lead insertion holes: 2.5mm
Pitch between
adjacent lead
insertion holes: 25mm
30
R22
10
36
28
8
1234567
9
1011121314
510
8 - 0.8F pin hole
14 - 1.5F drill hole
SIDE VIEW
BOTTOM VIEW
Pedestal (P/N XD4420VW)
GQ
GK
JCH
JKH
WKH
P/N of available core
Distance between
adjacent pin holes
The hole numbers are
arranged based on the
center notch.
Pitch between adjacent lead insertion holes: 2.5mm
Pitch between
adjacent lead
insertion holes: 30mm
40
R28
12
46
33
101112131415161718
987654321
55
15
8 - 0.8F pin hole
18 - 1.5F drill hole
SIDE VIEW
BOTTOM VIEW
Pedestal (P/N XD5625VW)
6
645
132
P/N of available core
The hole numbers are
arranged based on the
center notch.
Pitch between adjacent lead insertion holes: 2.5mm
Pitch between
adjacent lead
insertion holes: 9.5mm
16.5
13.5
R10
0.7
12
66
2 - F0.8 pin hole
6 - F1.2 drill hole
SIDE VIEW
BOTTOM VIEW
Pedestal (P/N XD1610VW)
N1
N2
645
1
XD2212VW
32
P/N of available core
The hole numbers are
arranged based on the
center notch.
Pitch between adjacent lead insertion holes: 2.5mm
Pitch between
adjacent lead
insertion holes: 11.5mm
21
18
R11
6
14
77
2 - F1.0 pin hole
6 - F1.2 drill hole
SIDE VIEW
BOTTOM VIEW
Pedestal (P/N XD2212VW)
SW
654
123
5.1
P/N of available core
The hole numbers are
arranged based on the
notch.
Pitch between adjacent lead insertion holes: 2.5mm
Pitch between
adjacent lead
insertion holes: 14mm
21
18
16.5
8.25 8.25
2 - F0.8 pin hole
6 - F1.5 drill hole
SIDE VIEW
BOTTOM VIEW
Pedestal (P/N XD2314VW)
G3
NU
NP
(mm) (mm)
(mm) (mm)
(mm) (mm)
(1/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
?Materials
P/N Shape Base material Auxiliary pin material Coil fixing material
XD1610VW, XD2212VW
XD2314VW, XD3415VW
XD4420VW, XD5625VW
XD3237HW, XD4054HW
XD4449HW, XD5358HW
PPS resin
F-type insulation
UL94V-0
or
Modified PA-6T
Polyamide resin
UL94V-0
or
PBT resin
B-type insulation
UL94V-0
-
-
-
-
-
Epoxy
adhensive
Without auxiliary pin
XD1610VW2, XD2212VW2
XD2314VW2, XD3415VW4
XD4420VW4, XD5625VW4
XD3237HW2, XD4054HW2
XD4449HW2, XD5358HW4
Without auxiliary pin
Fe or Fe-Ni allo y
Standard F0.8mm, F1.0mm, F1.2mm
Solder plating
?
Accessories used for choke coils of lying type
G6
G7
G8
J7H
J8H
N6
N7
X6
X7
X8
2.5
12 - F1.5 drill hole
2 - F1.2 pin hole
0.5
34
2.5
37
1234
5678
9 10 11 12
Pitch between
adjacent lead
insertion holes:
17.0mm
Pitch between adjacent lead insertion holes : 2.5mm
Pitch between
adjacent lead
insertion holes:
17.0mm
37
P/N of available core
SIDE VIEW
BOTTOM VIEW
Pedestal (P/N XD3237HW)
G9
JRH
JAH
N9
XR
9 - F1.5 drill hole
2 - F12 pin hole
5
54
48.8
47.5
123
456
789
44.2
Pitch between
adjacent lead
insertion holes:
22.1mm
Pitch between adjacent lead insertion holes : 2.5mm
Pitch between
adjacent lead
insertion holes:
22.1mm
P/N of available core
SIDE VIEW
BOTTOM VIEW
Pedestal (P/N XD4054HW)
@The specification described in this manual is defined on the basis of the documentation, information, and data obtained when the document is written. However, the
actual performance of each product may vary depending on the configuration of the circuit including the product. Therefore, confirm the performance and stability
of the product in the circuit which you design.
@In general, electronic components may generate heat depending on their operating conditions. Accordingly, never use the products near some flammable sub-
stances. In addition, never use the products if any specification exceeds the rated value. This may cause human injury and/or device failure.
?Note on use
@The auxiliay pins are normally insulated from lead wires.
@Contact NIPPON CHEMI-CON for the shape, dimension, and strength of the auxiliary pin.
GQ
GK
JCH
JKH
WKH
58
20
54
58
1
10
3.5
1.5
23456789
1112131415161718
192021222324252627
27 - F1.5 drill hole
4 - F1.2 pin hole
Pitch between
adjacent lead
insertion holes:
27.5mm
Pitch between adjacent lead insertion holes : 2.5mm
Pitch between
adjacent lead
insertion holes:
27.5mm
P/N of available core
SIDE VIEW
BOTTOM VIEW
Pedestal (P/N XD5358HW)
G0
GJ
JBH
49
3.2
1.5
49
46
1234567
8 9 10 1112 13 14
15 16 17 18 19 20 21
21 - F1.5 drill hole
2 - F1.2 pin hole
2.5
Pitch between
adjacent lead
insertion holes:
23.0mm
Pitch between adjacent lead insertion holes : 2.5mm
Pitch between
adjacent lead
insertion holes:
23.0mm
P/N of available core
SIDE VIEW
BOTTOM VIEW
Pedestal (P/N XD4449HW)
(mm) (mm)
(mm) (mm)
(2/2)
AMORPHOUS CHOKE COILS
AMORPHOUS CHOKE COILS
CAT. No. E1008E
1000
0.1
100
10
1 10 1000
1
100
Amorphous
EI22
EI25
EI30
EI40EI50
EI60
LNC191305G
LNC211205G
LNC150905G
LNC130805G
Ferrite
LNC462725G
LNC462715G
LNC372310G
LNC251510G
LNC221310G
Coil volume Vcoil [cm
3
]
Storage power Ln.In
2
[mH.A
2
]
?Storage power vs. Coil volume (Energy capacity) ?D.C. bias of amorphous choke coil
@Temperature dependence : Core temperature 25, 100c
1000
1
100
10
110 100 1000 10000
Frequency f [kHz]
Dust choke
Fe-Si-Al TM Series
Non-gap type
CM Series
Gap type
Ferrite choke
Mn-Zn, For power choke
Core loss PFe [W/kg]
?
Frequency dependence of the core loss of amorphous
?
D.C. bias of normal mode choke coil
@Comparison between ferrite choke and dust choke
Bm=100[mT], Magnetic flux: Sine wave
?Characteristics comparison of magnetic materials
1550
5000
40
400
550
500
12000
85
120
-
500
2300
52
230
-
700
10000
97
350
-
2000
700
325
750
-
1250
75000
20
570
-
Fe-based
amorphous
Nano-crystalline
alloy
High
permeability
ferrite
Power f errite
Permalloy
Silicon steel
Saturation magnetic
flux density Bs [mT]
Magnetic permeability
M (10[kHz])
Core loss at high frequency
P
Fe
[mW/g]
Crystallization temperature
Tx [C]
Applications
Output smoothing
Common-mode
noize supression
High frequency
transformer
Common-mode
noise supression Broad-band
frequency
transformer
Common-mode
noise supression
High frequency
transformer
Pulse transformer
Output smoothing
Sensor
Current
transformer
Transformer for
commercial
frequency
Low frequency choke
Curie point
Tc [C]
?
Location of amorphous alloy in soft magnetic materials
(1/1)
AMORPHOUS CHOKE COILS