ZH10 Series
Hall-effect Zero Speed
Sensors
DESCRIPTION
The ZH10 Hall-effect Speed Sensor Sensors provide a
durable, cost-effective solution in most harsh environments.
The sensor is available in a 11,9 mm [15/32 in/0.46875 in]
diameter, in a 25,4 mm [1.00 in] length.
The aluminum package is simple to install and adjust. It does
not require rotational orientation.
FEATURES
• Low cost
• Omni-directional sensor to target orientation
• Digital output
• Small size
• Low power consumption
POTENTIAL APPLICATIONS
• Industrial process control
• Factory automation
• Rotary applic ations, such as:
– Pumps
– Rollers
– Mixers
– Fan speed measurement
– Transmission
– Spindles
– Gear reducer RPM
– Process speed
– Synchronization
– Generator set
– Compressor speed
– Dyno testing
ZH10 Series
2 www.honeywell.com/sensing
SENSOR SP ECIF IC AT IO N S
Characteristic Minimum Maximum Unit Condition
Supply voltage 4 24 Vdc –
Supply current – 6 mA –
Output current – 30 mA short circuit protected
Output on voltage – 0.6 Vdc at 25 mA load
Output configuration – – – open drain MOFSET
Voltage low – 0.4 V at 30 mA max. sink
Voltage high – 30
Vdc –
Target orientation – – – omnidirectional
Duty cycle 35 65 % within operating gap
Operating frequency 0 15 k Hz no orientation required
Output signal rise/fall time – 4.0 μs 880 Ohm, 20 pF
Dielectric strength 200 – Vac <2 mA leakage
Operation gap – – – at gaps below curve (see Air Gap
Performance Curve)
Output impedance 4.7 5.3
kOhm –
Operating temperature range -40 [-40] 100 [212] °C [°F] –
Storage temperature – 125 [257] °C [°F] –
Sealing IP67 –
Shock 50 Gs, 11 ms –
Vibration 15 Gs, 10 Hz to 2000 Hz –
Housing material aluminum –
MOUNTING DIMENSIONS (For reference only: mm/[in])
Hall Effect Zero Speed Sensor
Honeywell Sensi ng and Control 3
EQUIVALENT ELECTRICAL SCHEMATIC
AIR GAP PERFORMANCE CURVE
TARGET MOTION
Automation and Control Solutions
Sensing and Control
Honeywell
1985 Douglas Drive North
Minneapolis, MN 55422
www.honeywell.com/sensing
005885-1-EN IL50 GLO Printed in USA
June 2007
Copyright © 2007 Honeywell International Inc. All rights reserved.
ORDER GUIDE
Catalog Listing Description
ZH10 Hall-effect zero speed sensor
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise
by Honeywell in writing; please refer to your order
acknowledgement or consult your local sales office for specific
warranty details. If warranted goods are returned to Honeywell
during the period of coverage, Honeywell will repair or replace,
at its option, without charge those items it finds defective. The
foregoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
While we provide application assistance personally, through
our literature and the Honeywell web site, it is up to the
customer to determine the suitability of the product in the
application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this
printing. However, we assume no responsibility for its use.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for
reference only. Do not use this docum ent as a product
installation guide.
• Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network
of sales offices, representatives and distributors. For
application assistance, current specifications, pricing or name
of the nearest Authorized Distributor, contact your local sales
office or:
E-mail: info.sc@honeywell.com
Internet: www.honeywell.com/sensing
Phone and Fax:
Asia Pacific +65 6355-2828
+65 6445-3033 Fax
Europe +44 (0) 1698 481481
+44 (0) 1698 481676 Fax
Latin America +1-305-805-8188
+1-305-883-8257 Fax
USA/Canada +1-800-537-6945
+1-815-235-6847
+1-815-235-6545 Fax
