HMC824LP6CE v05.1211 FRACTIONAL-N PLL WITH INTEGRATED VCO, 780 - 870 MHz Features * RF Bandwidth: 780 to 870 MHz * 24-bit Step Size, Resolution 3 Hz typ * Ultra Low Phase Noise -110 dBc/Hz in Band Typ. * Exact Frequency Mode * Figure of Merit (FOM) -227 dBc * 40 Lead 6x6mm SMT Package: 36mm2 * Built-in Digital Self Test * < 180 fs RMS Jitter Typical Applications 7 * Cellular/4G Infrastructure * Phased Array Applications * Repeaters and Femtocells * DDS Replacement * Communications Test Equipment * Very High Data Rate Radios PLLS w/ Integrated VCO - SMT * CATV Equipment 7-1 Functional Diagram Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC824LP6CE v05.1211 FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO, 780 - 870 MHz General Description The HMC824LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) with an Integrated Voltage Controlled Oscillator (VCO). The PLL consists of an integrated low noise VCO with divide-by-2 output, an autocalibration subsystem for low voltage VCO tuning, a very low noise digital Phase Detector (PD), a precision controlled charge pump, a low noise reference path divider and a fractional divider. The fractional PLL features an advanced delta-sigma modulator design that allows both ultra-fine step sizes and low spurious products. The phase detector (PD) features cycle slip prevention (CSP) technology to allow faster frequency hopping times. Ultra low in-close phase noise and low spurious also allows wider loop bandwidths for faster frequency hopping and low micro-phonics. Electrical Specifications, TA = +25 C VPPCP, VDDCP, VCC1, VCC2 = 5V 4%; RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS = 3.3V 6% GNDCP = GNDLS = Ground Paddle = 0V Parameter Condition Min. Typ. Max. Units RF Output Characteristics VCO Frequency at PLL Input 1560 1740 MHz RF Output Frequency at f VCO/2 780 870 MHz 16.5 dBm RF Output Power at f VCO/2 11 VCO Tuning Sensitivity Measured at 2 GHz, 2V VCO Supply Pushing Measured at 2 GHz, 2V 14 15 -2 MHz/V 1.5 MHz/V RF Output 2nd Harmonic -25 dBc RF Output 3rd Harmonic -23 dBc RF Output 4th Harmonic -31 dBc RF Divider Characteristics 19-Bit N-Divider Range (Integer) 19-Bit N-Divider Range (Fractional) Max = 219 - 1 16 524,287 Fractional nominal divide ratio varies (-3 / +4) dynamically max 20 524,283 Synthesizer phase noise can degrade by about 5dB when operating with a reference frequency near the low end of this range. 10 50 200 MHz AC Coupled 1.5 2 3.3 Vpp 5 pF REF Input Characteristics Max Ref Input Frequency Ref Input Range Ref Input Capacitance 14-Bit R-Divider Range 1 16,383 0.1 100 MHz 0.1 80 MHz 0.1 125 MHz 7 PLLS w/ Integrated VCO - SMT For theory of operation and register map refer to the "PLLs with Integrated VCOs - RF VCOs Operating Guide". To view the Operating Guide, please visit www.hittite.com and choose HMC824LP6CE from the "Search by Part Number" pull down menu. Phase Detector (PD) PD Frequency Fractional Feedback Mode [1] PD Frequency Fractional Feedforward Mode (and Register 6 [17:16]= 10) PD Frequency Integer Mode [1] Note 1: This maximum phase detector frequency can only be achieved if the minimum N value is respected. eg. In the case of fractional feedback mode, the maximum PFD rate = fvco/20 or 100MHz, whichever is less. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 7-2 HMC824LP6CE v05.1211 FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO, 780 - 870 MHz Electrical Specifications (Continued) Parameter Condition Min. Typ. Max. Units 2.54 mA Charge Pump Max Output Current 0.2 Charge Pump Gain Step Size (5-Bits) PD/Charge Pump SSB Phase Noise 20 A 50 MHz Ref, Input Referred 1 kHz -141 dBc/Hz 10 kHz Add 1 dB for Fractional -149 dBc/Hz 100 kHz Add 3 dB for Fractional -153 dBc/Hz Logic Inputs PLLS w/ Integrated VCO - SMT 7 VIH Input High Voltage DVDD3V-0.4 DVDD3V V VIL Input Low Voltage 0 0.4 V VOH Output High Voltage DVDD3V-0.4 DVDD3V V VOL Output Low Voltage 0 0.4 V 3.5 V Logic Outputs Power Supply Voltages AVDD, VCCHF, VCCPS, VCCPD, RVDD 3.0 3.3 DVDD3V 3.0 3.3 3.5 V VPPCP, VDDCP, VCC1, VCC2 4.8 5 5.2 V Analog 3.3V Supplies Digital Supply Analog 5V Supplies Power Supply Currents +5V Analog Charge Pump VPPCP, VDDCP 5.3 mA +5V VCO Core and PLL Buffer VCC2 56 mA +5V VCO Divider and RF Buffer VCC1 36 mA +3.3V Analog AVDD, VCCHF, VCCPS, VCCPD, RVDD 45 mA +3.3V Digital DVDD3V 6.5 mA Reg 01h=0, Crystal Not Clocked 10 A Reg 01h=0, Crystal Clocked 100 MHz 10 Power Down - Crystal Off Power Down - Crystal On, 100 MHz 200 A Power on Reset Typical Reset Voltage on DVDD 700 Min DVDD Voltage for No Reset 1.5 Power on Reset Delay mV V 250 s -93 dBc/Hz dBc/Hz VCO Open Loop Phase Noise at fvco/2 825 MHz Divide-by-2 Output 10 kHz Offset 825 MHz Divide-by-2 Output 100 kHz Offset -123 825 MHz Divide-by-2 Output 1 MHz Offset -148 dBc/Hz 825 MHz Divide-by-2 Output 10 MHz Offset -162 dBc/Hz 825 MHz Divide-by-2 Output 100 MHz Offset -166 dBc/Hz 1 kHz Offset -112 dBc/Hz Closed Loop Phase Noise PLL + VCO at fvco/2 Integer, 25 MHz PFD 7-3 Integer, 25 MHz PFD 10 kHz Offset -116 dBc/Hz Integer, 25 MHz PFD 100 kHz Offset -118 dBc/Hz Integer, 25 MHz PFD 1 MHz Offset -146 dBc/Hz Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC824LP6CE v05.1211 FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO, 780 - 870 MHz Electrical Specifications (Continued) Parameter Condition Fractional, 25 MHz PFD Min. Max. Units -107 dBc/Hz Fractional, 25 MHz PFD 10 kHz Offset -113 dBc/Hz Fractional, 25 MHz PFD 100 kHz Offset -115 dBc/Hz Figure of Merit Normalized 1 Hz Integer Mode Measured w/ 50 MHz PD at 30 kHz Offset -229 dBc/Hz Fractional Mode Measured w/ 50 MHz PD at 30 kHz Offset -227 dBc/Hz -70 -80 -80 -90 PHASE NOISE (dBc/Hz) 775 MHz FF 825 MHz FF 875 MHz FF -100 -110 -120 -130 -140 -150 -160 780 MHz FF 820 MHz FF 870 MHz FF -90 -100 -110 -120 -130 -140 -150 -160 10 3 10 4 10 5 10 6 10 7 10 -170 2 10 8 10 3 10 4 10 5 10 6 10 7 10 8 OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz) Typical VCO/2 Tuning Curves vs. Switch Position VCO/2 Free Running Phase Noise -40 fmax n0 775 MHz 825 MHz 875 MHz -80 kvco (MHz/V) PHASE NOISE (dBc/Hz) -60 -100 -120 -140 fmin n2 n4 n6 n8 n10 n12 n14 n16 n18 n20 n22 n24 n26 -160 -180 3 10 10 4 10 5 10 6 OFFSET FREQUENCY (Hz) 10 7 10 8 0 1 2 3 n30 n30 PLLS w/ Integrated VCO - SMT -70 -170 2 10 7 Typical Closed Loop Fractional Phase Noise [1] Closed Loop Integer Phase Noise PHASE NOISE (dBc/Hz) Typ. 1 kHz Offset n31 4 5 TUNING VOLTAGE (V) [1] Fractional Mode, 50 MHz Crystal, R=1, ~80 kHz Loop BW, (Loop filter values: Contact factory for component values) 2mA Charge Pump, -385A Offset. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 7-4 HMC824LP6CE v05.1211 FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO, 780 - 870 MHz Typical VCO Tuning Voltage After Calibration Free Running VCO Phase Noise (VTUNE Set by AutoCal) TUNE VOLTAGE AFTER CALIBRATION (V) -120 PHASE NOISE (dBc/Hz) 100 kHz Offset -130 -140 10 MHz Offset -160 780 800 820 840 860 880 4 fmin 3 fmax 31 15 0 2 1 0 FREQUENCY (MHz) VCO FREQUENCY (MHz) Typical VCO Sensitivity vs. Cap @ Fo Voltage Typical Output Power - Narrow Band Match 60 20 50 TUNING CAP 31 TUNING CAP 15 TUNING CAP 0 40 30 OUTPUT POWER (dBm) kvco (MHz/V) Typical Operating Range 20 15 10 5 10 0 0 1 2 3 4 0 750 5 TUNING VOLTAGE (V) 800 850 900 OUTPUT FREQUENCY (MHz) Figure of Merit NORMALIZED PHASE NOISE (dBc/Hz) PLLS w/ Integrated VCO - SMT 1 MHz Offset -150 -170 760 7 +27C -40C +85C 5 -200 -210 Typ FOM vs Offset -220 FOM Floor FOM 1/f Noise -230 -240 10 2 10 3 10 4 10 5 10 6 FREQUENCY OFFSET (Hz) 7-5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC824LP6CE v05.1211 FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO, 780 - 870 MHz Pin Descriptions Function Description 1 AVDD DC Power Supply for analog circuitry. 2, 5, 6, 8, 9, 11 - 14, 18 - 22, 24, 26, 34, 37, 38 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 3 VPPCP Power Supply for charge pump analog section 4 CP Charge Pump Output 7 VDDCP Power Supply for the charge pump digital section 10 RVDD Reference Supply 15 XREFP Reference Oscillator Input 16 DVDD3V DC Power Supply for Digital (CMOS) Circuitry 17 CEN Chip Enable. Connect to logic high for normal operation. 23 VTUNE VCO Varactor. Tuning Port Input. 25 VCC2 VCO Analog Supply 2 27 VCC1 VCO Analog Supply 1 28 RF_N VCO Divide by 2 RF Positive Output 29 RF_P VCO Divide by 2 RF Negative Output 30 SEN PLL Serial Port Enable (CMOS) Logic Input 31 SDI PLL Serial Port Data (CMOS) Logic Input 32 SCK PLL Serial Port Clock (CMOS) Logic Input 33 LD_SDO Lock Detect, or Serial Data, or General Purpose (CMOS) Logic Output (GPO) 35 VCCHF DC Power Supply for Analog Circuitry 36 VCCPS DC Power Supply for Analog Prescaler 39 VCCPD DC Power Supply for Phase Detector BIAS External bypass decoupling for precision bias circuits. Note: 1.920V 20mV reference voltage (BIAS) is generated internally and cannot drive an external load. Must be measured with 10G meter such as Agilent 34410A, normal 10M DVM will read erroneously. 40 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 7 PLLS w/ Integrated VCO - SMT Pin Number 7-6 HMC824LP6CE v05.1211 FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO, 780 - 870 MHz Absolute Maximum Ratings AVDD, RVDD, DVDD3V, VCCPD, VCCHF, VCCPS -0.3V to +3.6V VPPCP, VDDCP, VCC1 -0.3V to +5.8V VCC2 -0.3V to +5.5V Operating Temperature -40C to +85C Storage Temperature -65C to 125C Maximum Junction Temperature 125 C Thermal Resistance (RTH) (junction to ground paddle) 20 C/W Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Reflow Soldering PLLS w/ Integrated VCO - SMT 7 Peak Temperature 260C Time at Peak Temperature 40 sec ESD Sensitivity (HBM) Class 1B Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [1] HMC824LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H824 XXXX [1] 4-Digit lot number XXXX 7-7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC824LP6CE v05.1211 FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO, 780 - 870 MHz Evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Evaluation PCB Schematic To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC824LP6CE from the "Search by Part Number" pull down menu to view the product splash page. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com PLLS w/ Integrated VCO - SMT 7 7-8 HMC824LP6CE v05.1211 FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO, 780 - 870 MHz List of Materials for Evaluation PCB 127828 [1] PLLS w/ Integrated VCO - SMT 7 Item Description J1, J2 PCB Mount SMA RF Connector J3 Dual Row Terminal Strip J4 - J6 Connector Header C1, C15 - C17, C25 10 F Capacitor, 0805 Pkg. C2, C3, C6, C7, C11, C12, C14, C18, C27, C43, C45 0.47 F Capacitor, 0402 Pkg. C4, C13 22 pF Capacitor, 0402 Pkg. C5, C33 1000 pF Capacitor, 0402 Pkg. C8 2.2 pF Capacitor, 0402 Pkg. C19 - C24, C28, C30, C32, C34 0.1 F Capacitor, 0402 Pkg. C26 1.0 F Capacitor, 0603 Pkg. C29 47 pF Capacitor, 0402 Pkg. C35 3300 pF Capacitor, 0402 Pkg. C36 270 pF Capacitor, 0402 Pkg. C37, C38 68 pF Capacitor, 0402 Pkg. C39 - C42, C44 4.7 F Tantalum Capacitor, 0805 Pkg C46 27 pF Capacitor, 0402 Pkg. R1, R2, R5, R11, R15, R18, R19, R21, R24 Zero Ohm Resistor, 0402 Pkg. R3, R4 1 Ohm Resistor, 0402 Pkg. R6, R7 0 Ohm Resistor, 0805 Pkg. R8 22 Ohm Resistor, 0402 Pkg. R12, R20, R29 51 Ohm Resistor, 0402 Pkg. R22, R25 20 kOhm Resistor, 0402 Pkg. R26 - R28 1k Ohm Resistor, 0402 Pkg. L1 12 nH Inductor, 0402 Pkg. L2, L3 47 nH Inductor, 0402 Pkg/ TP3, TP4 Test Point PC Compact SMT U1 HMC824LP6CE PLL with Integrated VCO U2 HMC860LP3E Low Noise Quad Linear Regulator Y1 3.3V, 50 MHz VCXO Crystal Oscillator PCB [2] 125998 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR and FR4 7-9 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC824LP6CE v05.1211 FRACTIONAL-N SYNTHESIZER WITH INTEGRATED VCO, 780 - 870 MHz Notes: PLLS w/ Integrated VCO - SMT 7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 7 - 10