Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ GA
– EEE-107 –
φD±0.5
φd±0.05
F±0.5
Sleeve
14 min.
3 min.
L±0.1
+
–
■Features
● Endurance : 105 °C 1000 h
● RoHS directive compliant
Radial Lead Type
Series: GA Type: A
■Specifi cations
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 10 V.DC to 50 V.DC
Nominal Cap. Range 0.1 µ F to 220 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan δPlease see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 1000 hours, when
the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Capacitance change ±20 % of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■Di men sions in mm(not to scale)
Body Dia. φD4 5 6.3 8
Lead Dia. φd0.45 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5 2.5
W.V.(V.DC) Cap (µF) Frequency (Hz)
60 120 1 k10 k100 k to
10 to 50 0.1 to 220 0.85 1.00 1.30 1.40 1.55
■Frequency correction factor for ripple current
(Unit : mm)
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ GA
– EEE-108 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
10
22 4 7 30 0.22 1000 0.45 1.5 5.0 2.5 EEAGA1A220( ) 200 2000
33 5 7 50 0.22 1000 0.45 2.05.02.5
EEAGA1A330( ) 200 2000
47 6.3 7 65 0.22 1000 0.45 2.55.02.5
EEAGA1A470( ) 200 2000
68 6.3 7 75 0.22 1000 0.45 2.55.02.5
EEAGA1A680( ) 200 2000
100 6.3 7 110 0.22 1000 0.45 2.55.02.5
EEAGA1A101( ) 200 2000
220 8 7 160 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A221( ) 200 1000
16
10 4 7 30 0.18 1000 0.45 1.5 5.0 2.5 EEAGA1C100( ) 200 2000
15 4 7 33 0.18 1000 0.45 1.55.02.5
EEAGA1C150( ) 200 2000
22 5 7 50 0.18 1000 0.45 2.05.02.5
EEAGA1C220( ) 200 2000
33 6.3 7 65 0.18 1000 0.45 2.55.02.5
EEAGA1C330( ) 200 2000
47 6.3 7 77 0.18 1000 0.45 2.55.02.5
EEAGA1C470( ) 200 2000
100 8 7 120 0.18 1000 0.45 2.5 5.0 2.5 EEAGA1C101( ) 200 1000
25
10 4 7 33 0.16 1000 0.45 1.5 5.0 2.5 EEAGA1E100( ) 200 2000
15 5 7 45 0.16 1000 0.45 2.05.02.5
EEAGA1E150( ) 200 2000
22 5 7 50 0.16 1000 0.45 2.05.02.5
EEAGA1E220( ) 200 2000
33 6.3 7 75 0.16 1000 0.45 2.55.02.5
EEAGA1E330( ) 200 2000
68 8 7 100 0.161000 0.45 2.55.02.5
EEAGA1E680( ) 200 1000
35
6.8 4 7 33 0.131000 0.45 1.55.02.5
EEAGA1V6R8( ) 200 2000
10 5 7 35 0.13 1000 0.45 2.0 5.0 2.5 EEAGA1V100( ) 200 2000
15 6.3 7 50 0.13 1000 0.45 2.55.02.5
EEAGA1V150( ) 200 2000
22 6.3 7 70 0.13 1000 0.45 2.55.02.5
EEAGA1V220( ) 200 2000
47 8 7 96 0.13 1000 0.45 2.55.02.5
EEAGA1V470( ) 200 1000
50
0.1 4 7 1.1 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR10( ) 200 2000
0.15 4 7 1.7 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR15( ) 200 2000
0.22 4 7 2.3 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR22( ) 200 2000
0.33 4 7 3.5 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR33( ) 200 2000
0.47 4 7 5 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR47( ) 200 2000
0.68 4 7 7 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR68( ) 200 2000
14 7 100.101000 0.45 1.55.02.5
EEAGA1H1R0( ) 200 2000
1.5 4 7 16 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H1R5( ) 200 2000
2.2 4 7 18 0.101000 0.45 1.55.02.5
EEAGA1H2R2( ) 200 2000
3.3 4 7 22 0.101000 0.45 1.55.02.5
EEAGA1H3R3( ) 200 2000
4.7 4 7 26 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H4R7( ) 200 2000
6.8 5 7 35 0.101000 0.45 2.05.02.5
EEAGA1H6R8( ) 200 2000
10 6.3 7 39 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H100( ) 200 2000
15 6.3 7 55 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H150( ) 200 2000
22 8 7 70 0.10 1000 0.45 2.55.02.5
EEAGA1H220( ) 200 1000
33 8 7 91 0.10 1000 0.45 2.55.02.5
EEAGA1H330( ) 200 1000
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch B=5 mm, H=2.5 mm.
Suffi x "BQ" for φ8×7, 5mm pitch products
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 1000 h
00 Nov. 2012
