PATENT NUMBERS
5713755
5961339
DO NOT
SCALE FROM
THIS PRINT
CLT-1XX-02-XX-D-XX
-02 THRU -50
ROW SPEC.
-D DOUBLE ROW
(USE CLT-XX-D EXCEPT
FOR -BE OPTION)
LEAD STYLE
-F: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-G: GOLD, 10 Au / 50 Ni MIN ON
CONTACT, 3 Au / 50 Ni MIN ON TAIL
-S: SELECTIVE, 30 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
(USE C-114-22-S ONLY)
-H: HEAVY GOLD, 30 Au / 50 Ni MIN ON
CONTACT, 3 Au / 50 Ni MIN ON TAIL
-FM: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-LM: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-SM: SELECTIVE, 30 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
OPTION
-P: PICK & PLACE PAD
AVAILABLE ON POSITIONS
04 THRU 50 ONLY
(SEE FIG. 2, SHT 2. USE LMP-03)
-TR: TAPE AND REEL PACKAGING
(02 THRU 36 POS ONLY)
-BE: BOTTOM ENTRY
(SEE FIG. 6, USE CLT-XX-D-BE-XX)
-A: ALIGNMENT PIN (MOLDED OR STAKED)
(SEE FIGS. 3 & 4, SHT 2)
(STAKED MIN 5 POS)
(MOLDED MIN 3 POS)
-K: POLYIMIDE FILM PAD
(AVAILABLE ON POS. 4 THRU 50 ONLY)
(.005 [.13] THICKNESS WITH SILICONE
ADHESIVE)(SEE FIG 5, SHT 2)
(USE K-500-300)
PLATING SPECIFICATION
No OF POS. PER ROW
-02: SURFACE MOUNT
(SEE TABLE 1)
.0835 2.12
REF
CLT-XX-D-XX
FIG 1
(CUT TO POSITION) SEE NOTE 4, 9, 10
(NO. OF POS. x .0787[2.00])
.005[.13]
.0200
x .0050[.127] REF
0.51
(SEE NOTE 10)
.1575
REF
4.00
(NO. OF POS x .07874[2.00]) - .07874[2.00] REF
.07874
REF
2.00
2.5
MAX SWAY
(ANY DIRECTION)
"A"
"A"
C
L
C
SEE TABLE 1
(SEE NOTE 11)
FIG 6
-BE OPTION
(SAME AS FIG 1 EXCEPT INSULATOR)
.024
SQ REF
0.61
.090
±.002
2.27
±0.05
(MEASURE AT BEND)
.203
±.010
5.15
±0.25
(SEE NOTE 6)
+4
-3
SECTION "A"-"A"
SCALE 4 : 1
C
L
BURR SIDE (SEE NOTE 8)
C
SEE NOTE 2
-P OPTION W/O -A OPTION
ALL OPTIONS EXCEPT -P
OPTION W/O -A OPTION
POSITIONS 04 - 50
SEE NOTE 11
USE TP-12 PLUGS
PACKAGING VIEWS
(SEE NOTE 5)
PT-CLX002-D
C
BR
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 10
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
2MM LOW PROFILE SOCKET STRIP
BY:
CLT-1XX-02-XX-D-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
10/03/1994
2
1
SHEET SCALE: 2:1
F:\DWG\MISC\MKTG\CLT-1XX-02-XX-D-XX-MKT.SLDDRW
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. COPLANARITY TO BE .004 FOR POSITIONS 2-25,
.006 FOR POSITIONS 26-34, AND .008 FOR 35-50.
3. MINIMUM PUSHOUT FORCE: .5 LB.
4. WILL LOSE A POSITION FOR EVERY CUT MADE ON A SOCKET STRIP.
5. ALL OPTIONS:PACKAGE POSITIONS -04 THRU -50 IN
PT-CLX002-D TUBE AS SHOWN IN VIEWS, WITH TWO TP-12 PLUGS
PER TUBE. LAYER PACKAGE POSITIONS -02 & -03.
6. SHEAR TAILS TO DIMENSION SHOWN.
7. PARTS TO BE SYMMETRICAL ABOUT
C
L
8. .005 MAX. BURR.
9. CUT FLASH TO BE .010 [.25] MAX WITH NO FLASH
ALLOWED IN HOLES OR EXTENDING BELOW LEADS
10. STANDARD BODY ENDWALL AFTER CUTTING: .0215 MIN.
11. -BE BODY ENDWALL AFTER CUTTING: .0169
.003 [.429
.08]
12. C-114-02 CAN BE USED FOR C-114-22.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
MATERIAL:
INSULATOR: LCP, UL 94 VO, COLOR BLACK
CONTACT: PHOS BRONZE
REVISION BR
*
= FOR -BE OPTION ONLY
*
= FOR -BE OPTION ONLY
.098 2.48
.225 5.72
FIG 2
-P: PICK & PLACE PAD
(4 POS MIN)
C
L
LMP-03
C
.202
REF
5.13
C
L
((NO. OF POS -2) x .0787[2.00])
.005
C
L
FIG 3
-A OPTION (STAKED)
(5 POS MIN)
CLT-XX-D(-BE
*
)
C
.035 0.89
.030
REF
0.76
.025
REF
0.64
2
MAX TOE
(ANY DIRECTION)
SM-A7H
C
(No. OF POS. - 2) x .0787[2.00] REF
CLT-XX-D(-BE
*
)
FIG 4
-A OPTION (MOLDED)
(3 POS MIN)
C
.0235
REF
0.597
.025
REF
0.64
(SEE NOTE)
"M"
.020
±.010
0.50
±0.25
.1969
±.0050
5.001
±0.127
(SEE NOTE)
"P"
C
L
C
.095 2.400
NOTE: "M" = USED MEASURED DIMENSION (REF)
"P" = (("M" - .1969 [5.00]) / 2)
.020 [.51]
FIG 5
-K OPTION
(4 POS MIN)
SHEET OF
2MM LOW PROFILE SOCKET STRIP
BY:
CLT-1XX-02-XX-D-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
10/03/1994
2
2
SHEET SCALE: 4:1
REVISION BR
F:\DWG\MISC\MKTG\CLT-1XX-02-XX-D-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
