3 2 " 40 9 8 | 7 | 6 5 4 3 2 4 975 = A (00) PIN Ata 2.65 > Peel PIN Ab 370) LE _a35 (ADD FOR [ , -- of 1.30 ENDWALL) { i | ee ee ROW A | o oot t+ ROW B o a a o o- 4 1.85 25 85 8) 8 oj +t ROW C i 25 85 86% ott ROW D a on t+ + ROW E 17.60 o : ott ROW F 32.2 25.90 0, 0. 0 0 oo ft ROW G 25.90 oe o 0 oot, +4 ROW H 32.2 nre,, o4 / \ o o_|1+-F ROW J {1 te 8 oO ott +H ROW K \ LY / 0 ao o o| ot} ROW L EERE Fe o eo ttt ROW M a o oT }4 ROW N o---9--- 0 o EEL | 0 0 of 0 otnere. ot ROW 0 __ | 5 =e 7 ROW P yey SHOWN IN POSITION "A" aid ] / o oo 0 \ es ott 4 1.00 a ] | KEEP-OUT ZONE~ 0.10 6 a | BACKPLANE HOLE PATTERN % 0.4640.05 PTH 44 a #0) rier 98 (CONNECTOR SIDE) (90.57 DRILL) SCREW HOLE SEE NOTE 8 (90.88 PAD) FOR ESD OPTION (30 HOLES PER COLUMN) NOTCH DESIGNATES ROW A 316 229 16.2 MINIMUM { BOARD 160 a AF Aad a a WS 1 (PIN HEIGHT) RoR TH i | ft | FE f 2 (STAGGERED VIEW SHOWN) 2.64 TAI LENGTH 3 225] Jouay| GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS HIRD NGLE 4 S28] Isympois| (UNLESS SPECIFIED) MM ONLY 3:1 | METRIC | PARR A ECTION 5 2 S 2 2 mm INCH DRAWN BY DATE TITLE > SS RAlz1G7-0 [PLACES E--- [#--- BPISZCZOR _ 2007/02/28 I-TRAC 15 ROW BP aut o | oot F 3 PLACES|+--- _|+--- _ |CHECKED BY DATE GUIDE LEFT ASSEMBLY met ele] YO 2 PLACES|+0.13 _[+=== _|JLAURX 2007/02/28 SALES DRAWING Woowsla 1 PLACE [0.25 [+--- APPROVED BY DATE fess, WO (orate = CBIXLER 2007/02/28 molex as tae ANGULAR +1/2 MATERIAL NO. DOCUMENT NO. SHEET NO. ioe Te DRAFT WHERE APPLICABLEL_SEE CHART SD-76035-002 1OF 4 =H Gt =e} _ SZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX E i WITHIN: DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T Rev. @ 20T2/01M1 2 1 10 9 8 7 6 5 4 3 | 2 | 1B 12 " 10 9 8 7 | 6 | 5 4 3 2 76035-*x*x MODULE TYPE -- TAIL PLATING TYPE T T PIN EER@OH- (BP GOLD GUIDE LEFT -- MATTE TIN (FORMERLY TIN/LEAD) = 2 3 = 4.70 - 30 GOLD GUIDE LEFT -- MATTE TIN = 3 4 = 5,70 - 30 GOLD GUIDE LEFT W/END WALL -- MATTE TIN (FORMERLY TIN/LEAD) = 6 KEY ORIENTATION 5 = 470 & 5.70 - 30 GOLD GUIDE LEFT W/END WALL -- MATTE TIN = 7 0 = NO KEY STAGGERED 1=A 6 = 3.90 - 10 GOLD # OF COLUMNS 2=8 7 = 4.70 - 10 GOLD 8 = 8 COL 3=C 8 = 5.70 - 10 GOLD 9=9 COL 4=D 9 = 4.70 & 5.70 - 10 GOLD 1 = 10 COL 5-E STAGGERED 6=F 7=G 8-H MATERIAL NUMBER| # OF COLUMNS DIM "A" DIM *B 76035-28% 8 35.9 25.90 76035-29%x 9 39.6 29.60 76035-21%x 10 433 33.30 GUIDE LEFT STYLE 76035-38% 8 35.9 25.90 76035-39%x 9 39.6 29.60 76035-31%x 10 433 33.30 MATERIAL NUMBER| # OF COLUMNS DIM "A" DIM B 76035-68xx 8 37.2 25.90 76035-69x* 9 40.9 29.60 76035-64s% 40 Lb 33.30 GUIDE LEFT W/END WALL STYLE| 76035-78% 8 37.2 25.90 76035-79x 9 40.9 29.60 76035-7 1xx 10 44.6 33.30 ees QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE S38) |sympo_s| (UNLESS SPECIFIED) MM ONLY 4 METRIC Cl provect ION 2 2 2 2 mm INCH DRAWN BY DATE TITLE RRR Z| G7 [CPLACESIE=-- [== BPISZCZOR _ 2007/02/28 I-TRAC 15 ROW_BP ~ a 3 PLACES|+-- [+-- _ [CHECKED BY DATE GUIDE LEFT ASSEMBLY Bee als|\WO [2 pLaces|toas [+-- _JLAURX 2007/02/28 SALES DRAWING id a, & a 4 w 0 1 PLACE [0.25 +--- APPROVED BY DATE 5 Ee 0 PLACE [= + CBIXLER 2007/02/28 m xX WI Ss sae ANGULAR 1/2 MATERIAL NO. DOCUMENT NO. SHEET NO. Wy & ee DRAFT WHERE APPLICABLE|__SEE CHART SD-76035-002 2 OF 4 Mu oo MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX E a WITHIN DIMENSIONS C |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_f _C_P_AM_T| Re soDONN 12 "l 10 9 8 7 6 5 4 3 | 2 | 1B 2 10 8 7 6 5 4 3 2 1 ~|}-[100 NOTES: 1, MATERIALS: HOUSING - LIQUID CRYSTAL POLYMER (LCP) Hr 30 GLASS-FILLED, UL94V-0 TERMINALS - HIGH PERFORMANCE COPPER ALLOY 2. FINISH: 10 MICROINCH MIN. GOLD (MAPS) OR 30 MICROINCH MIN. GOLD DCARD PCB Mt pow A IN CONTACT AREA. SELECTIVE MATTE TIN ON PCB TAILS, a NICKEL OVERALL. so | 3. REFER TO MOLEX PRODUCT SPECIFICATION PS-75710-999 an FOR PERFORMANCE SPECIFICATIONS, on et! 4. FOR MIXED CONTACT MATING LENGTHS, CONSULT MOLEX BPLANE PCB . =| FOR AVAILABLITY. :| 5, THIS PART CONFORMS TO CLASS B REQUIREMENTS OF | MOLEX COSMETIC SPEC PS-45499-002. Se 6. PACKAGE PER: PK-70873-586, ----_-- 7. GUIDED PARTS TO BE SHIPPED WITH 2-56 UNC B SCREW P/N 73774-1000. 15 ROW I-TRAC 8. FOR GROUNDED GUIDE PINS USE DIA 3.56+/-0.08 (PTH), | DIA 3.66(DRILL), AND DIA 6.5 (PAD). BOARD RELATIONSHIPS 9. REFER TO PCB ROUTING GUIDE FOR ANTIPAD AND ROUTING RECOMMENDATIONS. 10. MAPS (MOLEX ADVANCED PLATING SYSTEM). CENTERLINE OF | SCALE 2:1 HOLE PATTERN oN COLUMN 32.2 52 q q q q q g DCARD PCB q q | ROW A f a+ DCARD ROW A | q | 16.2 16.1 BPLANE PCB ~\ | $ : 3 +||-+[1.20 | L254 |-[o9) < = oO ow uu Zz <f ! oO ao Sea QUALITY] GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS | THIRD ANGLE 228) |sympots| (UNLESS SPECIFIED) MM ONLY 4A METRIC | CleRovECTION eg Ses mm INCH _| DRAWN BY DATE | ITLE RRR ZIG =O [PLACES|E=-- J E--= PPISZCZOR 2007/02/28 I-TRAC 15 ROW BP va 5 3 PLACES|+ --- __|+--~ __ |CHECKED BY DATE GUIDE LEFT ASSEMBLY Pee elf WO |r PLacesito73|+--~ JLAURX 2007/02/28 SALES DRAWING woo oo = yu 1 PLACE fa 0.25 +--- APPROVED BY DATE ESeg5 |W tora CBIXLER 2007/02/28 molex WI Sg = a e ANGULAR +1/2 MATERIAL NO. DOCUMENT NO. SHEET NO, We eee DRAFT WHERE APPLICABLE|_SEE CHART SD-76035-002 3 OF 4 Wu GO tl MUST REMAIN SZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX E ig WITHIN: DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_f _.C_P_AM_T, Rev. G 2012/01/11 12 11 10 8 7 6 5 4 3 | 2 | 113 | 12 10 xo 7 | 6 4 3 NEAR SIDE Ab NEAR SIDE A1a ROW A NEAR SIDE 13.80] } 14.80 17.50|4 18.50 21,20] 22.20 24.90] 25.90 0 23.20 26.90 A 0.10) @ 0.462005 PTH ($0.57 DRILL) (40.88 PAD) 21,35 25.05 ROW A FAR-SIDE 4 OPTION 90 \ NEAR SIDE P8b NEAR SIDE P8a NEAR SIDE ORTHO PIN MAPPING OPTION 90 (NEAR SIDE - FAR SIDE) Ab-P8b A1a-P8a C1b-P7b C1a-P7a E1b-P6b E1a-P6a Gib-P5b Gia-P5a J1b-P4b J1a-P4a Lib-P3b L1q-P3a N1b-P2b N1a-P2a P1b-Pb P1a-P1a A2b-N8b A2a-N8a C2b-N7b5 C2a-N7a E2b-N6b E2a-N6a G2b-N5b G2a-N5a J2b-N4b J2Za-N4a L2b-N3b L2a-N3a N2b-N2b N2a-N2a P2b-Nb P2a-N1a A3b-L8b A3a-L8a C3b-L7b C3a-L7a E3b-L6b E3q-L6a G3b-L5b G3q0-L5a J3b-L4b J3a-L4a L3b-L3b L3a-L3a N3b-L2b N3aq-L2a P3b-L 1b P3a-L1a A4b-J8b |A5b-G8b A4q-J8q |A5q-G8a C4b-J7b |C5b-G7b C4a-J7a |C5a-G7a E4b-J6b |ESb-G6b E4q-J6q |E5a-G6a G4b-J5b |G5b-G5b G4aq-J5a |G5a-G5a J4b-J4b [J5b-G4b J4q-J4a0 |J5qa-G4a L4b-J3b |L5b-G3b L4aq-J3a |L5q-G3a N4b-J2b |NSb-G2b N4q-J2a |N5a-G2a P4b-J1b |PSb-G1b P4a-J1qa |PSa-Gia A6b-E8b A6a-E8a C6b-E7b C6a-E7a Eb-E6b Eq-E6a G6b-E5b G6a-E5a J6b-E4b J6a-E4a L6b-E3b L6q-E3a Nb-E2b N6q-E2a Pb-E1b Pa-E1a A7b-C8b A7a-C8a C7b-C7b C7a-C7a E7b-C6b E7a-C6a G7b-C5b G7a-C5a J7b-C4b J7a-C4a L7b-C3b L7a-C3a N7b-C2b N7a-C2a P7b-C1b P7a-C1a A8b-A8b A8a-A8q| C8b-A7b C8a-A7a E8b-A6b E8a-A6a G8b-A5b G8a-A5a J8b-A4b J8qa-A4a L8b-A3b L8q-A3a N8&b-A2b N8a-A2a P8b-Ab P8q-A1a ORTHO PIN MAPPING OPTION 270 (NEAR SIDE - FAR SIDE) Ab-A1q At1g-A1b C1b-A2a C1a-A2b E1b-A3a E1qa-A3b Gib-A4a Gia-A4b Jib-A5a Jia-A5b Lib-Aa L1a-A6b N1b-A7a N1a-A7b P1b-A8a P1qa-A8b A2b-C1a A2a-C1b C2b-C2a C2a-C2b E2b-C3a E2a-C3b G2b-C4a G2aq-C4b J2b-C5a J2a-C5b L2b-C6a L2a-C6b N2b-C7a N2a-C7b P2b-C8a P2a-C8b A3b-E1a A3a-E1b C3b-E2a C3a-E2b E3b-E3a E3q-E3b G3b-E4a G3a-E4b J3b-E5a J3q-E5b L3b-E6a L3a-E6b N3b-E7a N3a-E7b P3b-E8a P3q-E8b A4b-G1a | A5b-J1a A4aq-G'b | A5a-J1b C4b-G2a | CSb-J2a C4a0-G2b | C5a-J2b E4b-G3a]E5b-J3a E4q-G3b | E5a-J3b G4b-G4a | G5b-J4a G4q-G4b | G5a-J4b J4b-G5a | J5b-J5a J4a-G5b | J5a-J5b L4b-G6a |L5b-J6a L4a-G6b |L5a-J6b N4b-G7a|N56-J7a N4qg-G7b | N5a-J7b P4b-G8a | P5b-J8a P40-G8b | P5a-J8b A6b-L1a Aa-L1b C6b-L2a Cq-L2b E6b-L3a E6q-L3b Gb-L4a G6q-L4b J6b-L5a J6q-L5b L6b-La L6q-Lb N6b-L7a Nq-L7b Pb-L8a Pq-L8b A7b-N1a A7a-Nib C7b-N2a C7a-N2b E7b-N3a E7a-N3b G7b-N4a G7a-N4b J7b-N5a J7a-N5b L7b-N6a L7a-Nb N7b-N7a N7a-N7b P7b-N8a P7a-N8b A8b-P'1a A8a-P'1b C8b-P2a C8a-P2b E8b-P3a E8a-P3b G8b-P4a G8a-P4b J8b-P5a J8a-P5b L8b-Pa L8a-P6b N8b-P7a N8a-P7b P8b-P8a P8q-P8b Orthogonal PCB Layout NOTES: SIGNAL PAIRS (SHARED VIAS) 9 NEAR SIDE GROUNDS GENERAL TOLERANCES (UNLESS SPECIFIED) QUALITY DIMENSION STYLE SCALE | SYMBOLS MM ONLY 44 DESIGN UNITS THIRD ANGLE METRIC [OCI AHRD ANC DRAWN BY DATE TITLE PISZCZOR 2007/02/28 CHECKED BY DATE JLAURX 2007/02/28 2013/04/05 2013/04/16 2013/08/26 mm INCH 4 PLACES |--~ [--= 3 PLACES |+ ~~~ +--7 2 PLACES|+0.13 [+--- FAR SIDE GROUNDS I-TRAC 15 ROW BP GUIDE LEFT ASSEMBLY SALES DRAWING WO W-0 DESCRIPTION APPROVED BY DATE CB I XLER 2007/02/28 molex MATERIAL NO. DOCUMENT NO. SHEET NO. SEE CHART SD-76035-0072 40F 4 1 PLACE [40.25 [+--- 0 PLACE [+ + ANGULAR +1/2 WO SEE SHEET 1 EC NO: UCP2013-4288 TTIDRWN-RWHIPPLE CHKD:MWOLFE APPR: SMILLER DRAFT WHERE APPLICABLE MUST REMAIN SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX WITHIN DIMENSIONS C INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T| Rev. G 2012/01/11 2 1 10 9 8 7 6 5 4 3 | 2 | 1 REV