OBSOLETE PLEASE USE GBJ25005 - GBJ2510 (DS21221) GBPC25005/W - GBPC2510/W 25A GLASS PASSIVATED BRIDGE RECTIFIER Features Glass Passivated Die Construction Low Reverse Leakage Current Low Power Loss, High Efficiency Surge Overload Rating to 300A Peak Metal Base for Maximum Heat Dissipation Case to Terminal Isolation Voltage 1500V UL Listed Under Recognized Component Index, File Number E94661 Lead Free Finish, RoHS Compliant (Note 4) GBPC H GBPC / GBPC-W B E A C H (AC) (+) J C Mechanical Data Dim Min Max A 28.30 28.80 B 7.40 8.25 C 16.10 17.10 E 18.80 21.30 13.80 14.80 G A (AC) (-) Hole for #10 screw H Case: GBPC / GBPC-W Case Material: Molded Plastic with Heatsink Internally Mounted in the Bridge Encapsulation. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish Silver. Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: As Marked on Case Mounting: Through Hole for #10 Screw Mounting Torque: 8.0 Inch-pounds Maximum Ordering Information: See Page 3 Marking: Type Number GBPC Weight: 20 grams (approximate) GBPC-W Weight: 14 grams (approximate) 5.08 G GBPC-W H B M L 5.59 J 17.60 18.60 K 10.90 11.90 1.07 L 0.97 M 31.80 P 17.60 18.60 All Dimensions in mm A H P "W" Suffix Designates Wire Leads No Suffix Designates Faston Terminals (AC) (+) P K (-) Maximum Ratings and Electrical Characteristics A (AC) @TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol GBPC25 005/W GBPC25 01/W GBPC25 02/W GBPC25 04/W GBPC25 06/W GBPC25 08/W GBPC25 Unit 10/W VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 25 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 300 A Forward Voltage (per element) VFM 1.1 V IR 5.0 500 A 2 Average Rectified Output Current Peak Reverse Current at Rated DC Blocking Voltage @ TC = 60C @ IF = 12.5A @ TC = 25C @ TC = 125C 2 2 I t Rating for Fusing (Note 1) It 374 As Typical Total Capacitance (Note 2) CT 300 pF Typical Thermal Resistance per Leg (Note 3) RJC 1.3 C/W Tj, TSTG -65 to +150 C Operating and Storage Temperature Range Notes: 1. 2. 3. 4. Non-repetitive, for t > 1.0ms and t < 8.3ms. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Thermal resistance junction to case mounted on heatsink. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. DS21209 Rev. 10 - 6 1 of 3 www.diodes.com GBPC25005/W - GBPC2510/W (c) Diodes Incorporated OBSOLETE PLEASE USE GBJ25005 - GBJ2510 (DS21221) IF, INSTANTANEOUS FORWARD CURRENT (A) 40 IF, AVERAGE FORWARD CURRENT (A) Mounted on a 220 x 220 x 50 mm AL plate heatsink 30 20 10 Resistive or Inductive load 0 0 25 50 75 100 125 150 100 10 1.0 0.1 Tj = 25C 0.01 0 TC, CASE TEMPERATURE (C) Fig. 1 Forward Current Derating Curve 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) 400 1000 f = 1 Mhz Tj = 25C Single half-sine wave CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.2 300 200 100 100 T j = 150C 0 10 1 10 100 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance (per element) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current 100 10 1.0 0.1 0.01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics (per element) DS21209 Rev. 10 - 6 2 of 3 www.diodes.com GBPC25005/W - GBPC2510/W (c) Diodes Incorporated OBSOLETE PLEASE USE GBJ25005 - GBJ2510 (DS21221) Ordering Information (Note 5) Device GBPC25005 GBPC2501 GBPC2502 GBPC2504 GBPC2506 GBPC2508 GBPC2510 GBPC25005W GBPC2501W GBPC2502W GBPC2504W GBPC2506W GBPC2508W GBPC2510W Note: Packaging GBPC GBPC GBPC GBPC GBPC GBPC GBPC GBPC-W GBPC-W GBPC-W GBPC-W GBPC-W GBPC-W GBPC-W Shipping 100/Tray 100/Tray 100/Tray 100/Tray 100/Tray 100/Tray 100/Tray 100/Tray 100/Tray 100/Tray 100/Tray 100/Tray 100/Tray 100/Tray 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2013, Diodes Incorporated www.diodes.com DS21209 Rev. 10 - 6 3 of 3 www.diodes.com GBPC25005/W - GBPC2510/W (c) Diodes Incorporated