Product data sheet
Characteristics
AP9810
APC Dry Contact I/O Accessory
Overview
Presentation UPS management accessory that provides two dry contact input and one relay output interface to
APC UPS management offers with UIO ports such as the UPS Network Management Card (AP9631)
or Dry Contact I/O SmartSlot Card (AP9613).
Lead time Usually in Stock
General
Provided equipment Cat 5 Ethernet cable
User manual
Physical
Colour Black
Depth 4.46cm
Height 2.2cm
Net weight 0.05kg
Width 4.52cm
Conformance
Standards EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-6
Environmental
Ambient air temperature for operation 0…40°C
Operating altitude 0...3333 ft
Relative humidity 0…95%
Ambient air temperature for storage -15…65°C
Storage altitude 0.00…4572.00m
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Dec 29, 2020
1
Packing Units
Package 1 Weight 0.14kg
Package 1 Height 3.3cm
Package 1 width 25.4cm
Package 1 Length 12.7cm
Offer Sustainability
Sustainable offer status Green Premium product
REACh Regulation REACh Declaration
EU RoHS Directive Compliant
EU RoHS Declaration
Lead free Yes
WEEE The product must be disposed on European Union markets following specific waste collection and
never end up in rubbish bins
Halogen content performance Halogen free product
Optimized Energy Efficiency Energy efficient product
Contractual warranty
Warranty 2 years repair or replace
2