REV, 6/3/05 DATE REV ECN APPD. BY 1/24/06 | Al 7454 M aE ou 3/21/06 | A2 7549 SAW = 8-6-10 | A3 | 9039 TRM Ah .060 [152]| - 680 [17.27] MAX | 7 125 [3.18}.010 [0.25] 650 [16.51] MAX (MEASURED AT FACE OF CONNECTOR) NOTES: 1. CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V0 CONTACTS/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA SEE CHART FOR PART NUMBER 2. FOR PRODUCT SPECIFICATIONS SEE PRO2601. | E PIN POSITION LAYOUT IS 7 125 [3.17] 3, DIMENSIONS AND TOLERANCES COMPLY WITH FCC/CFR 47, PART 68 IDENTICAL TO STANDARD JACKS ~ . 94}, . , C 155 [3.941.010 [0.25] 4, DESIGNED FOR A CATEGORY 5/5e APPLICATIONS. 1.267 [6.78] MAX | 680 [17.27] MAX -| .050 [1.27 9.035 [0.89] +.003 [0.08] (8) _-| LL.050 a le 3S 4 Joo [2.54] re = 8 PN i$ itt a aq 30 MICRO-INCHES [0.76um] SS7188VSANF-A01 ten 3 as [008] ja TL = CONTACT PLATING PART NUMBER oN NN = IN MATING AREA At YT ot = 9128 [3.25] 9) | 1 080 [2.03] 3 ae THIRD ANGLE PROJECTION 125 [3.18] 2 ow, [G06 [0.15] 450 [11.43] si Bel St ewart Connector l+.610 [15.49] ~} Glen Rock, PA 17327-9199 (717) 235-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com TITLE: EIGHT CONTACT, EIGHT POSITION; VERTICAL MOUNT SHIELDED JACK P.C.B. RECOMMENDED HOLE LAYOUT DO NOT SCALE DRAWING DRAWING IS SUBJECT TO SEEN FROM COMPONENT SIDE toHS GRANGE WHEDUT NOTICE NONFLANGED ALL CENTERLINE DIMENSIONS ARE BASIC. DIMENSIONS: INCHES [METRIC] THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON | PRN BY: DAB DATE 2-4-00 UNLESS OTHERWSE SPECIFIED ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF TOLERANCES ARE +.005 [0.13] | BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, | APPD BY: LKE DATE 9-4-00 ANGLES ARE + 1 COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN SHEET NO. CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT [DWG NO. REV. 1 OF 1 MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. CT/10089 AS 2 | AutoCAD