Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.
CAUTION
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.
NOTICE
indicates that an unintended result or situation can occur if the corresponding information is not taken into
account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation for the specific task, in particular its warning notices and
safety instructions. Qualified personnel are those who, based on their training and experience, are capable of
identifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be adhered to. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of the
owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
Ⓟ 04/2011
Copyright © Siemens AG 2011.
Technical data subject to change
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description
ET200M-IM 153-1 6ES7 153-1AA02-0XB0 IM 153-1, bus interface module for S7-300 SMs, FM
350 to FM 352, FM355, CP 341,
module replacement in RUN
X X 08/00
ET200M-IM 153-1,
extended environmental
conditions
6ES7 153-1AA82-0XB0 IM 153-1, bus interface module for S7-300 SMs,
extended environmental conditions
X X 10/05
ET200M-IM 153-1 6ES7 153-1AA03-0XB0 IM 153-1, bus interface module for S7-300 SMs, FM
350 to FM 352, FM355, CP 341,
module replacement in RUN
XX
ET200M-IM 153-1,
extended environmental
conditions
6ES7 153-1AA83-0XB0 IM 153-1,
bus interface module for S7-300 SMs,
extended environmental conditions
X X 11/03
ET200M-IM 153-2 6ES7 153-2AA01-0XB0 IM 153-2, bus interface module for S7-300 SMs, FM
s
(except FM356-4),
module replacement in RUN
X X 04/00
ET200M-IM 153-2 6ES7 153-2AA02-0XB0 IM 153-2, bus interface module for S7-300 SMs, FM
s
(except FM356-4),
module replacement in RUN
X X 06/04
ET200M-IM 153-2 6ES7 153-2BA00-0XB0 V3.x IM 153-2, bus interface module for S7-300 SMs, FM
s
(except FM356-4),
module replacement in RUN,
extension of process control functions.
X S X 07/06
ET200M-IM 153-2 6ES7 153-2BA01-0XB0 V4.x IM 153-2, bus interface module for S7-300 SMs, FMs
(without FM356-4),
module replacement in RUN,
extension of process control functions
XSX
ET200M-IM 153-2 6ES7 153-2BA81-0XB0 V4.x IM 153-2 Outdoor;
bus interface module for S7-300 SMs, FMs (without
FM356-4),
module replacement in RUN,
extension of process control functions
XSX
ET200M-IM 153-2 6ES7 153-2BA02-0XB0 V5.x IM 153-2, bus interface module for S7-300 SMs, FMs
(except FM356-4),
module replacement in RUN,
extension of process control functions,
supports operation of up to 12 I/O modules
XSX
ET200M-IM 153-2 6ES7 153-2BA82-0XB0 V5.x IM 153-2 Outdoor,
bus interface module for S7-300 SMs, FMs (except
FM356-4),
module replacement in RUN,
extension of process control functions,
supports operation of up to 12 I/O modules
XSX
ET200M-IM 153-2 FO 6ES7 153-2AB01-0XB0 IM 153-2 with FOC hardware,
bus interface module for S7-300 SMs and FMs
(without FM356-4),
module replacement in RUN
X X 01/03
ET200M-IM 153-2 FO 6ES7 153-2BB00-0XB0 V3.x IM 153-2, bus interface module for S7-300 SMs, FMs
(except FM356-4),
module replacement in RUN,
extension of process control functions.
XSX
Partition 6ES7 195-1KA00-0XA0 Ex partition for ET 200M
Bus Module 6ES7 195-7HA00-0XA0 Active bus module for ET200M IM153; PS/IM
Bus Module 6ES7 195-7HB00-0XA0 Active bus module for ET200M IM153; 2x40mm
Bus Module 6ES7 195-7HC00-0XA0 Active bus module for ET200M IM153; 1x80mm
Bus module 6ES7392-1AN00-0AA0 Active bus module for ET200M IM153
for 64-channel Dx-modules
Bus module 6ES7392-1BN00-0AA0 Active bus module for ET200M IM153
for 64-channel Dx-modules
BM IM/IM 6ES7 195-7HD00-0XA0 Active bus module ET200M IM 153; IM/IM for
redundant IM operation
07/04
BM IM/IM 6ES7 195-7HD10-0XA0 Active bus module ET200M IM 153; IM/IM for
redundant IM operation
F Partition bus module 6ES7 195-7HG00-0XA0 Fail-safe partition bus module for ET200M
F Partition bus module 6ES7 195-7KF00-0XA0 Fail-safe partition bus module for ET200M
Refer to the manual "SIMATIC Distributed I/O Device ET 200M"
for information about valid combinations of interfaces, bus modules and of available functions.
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Properties
W C R T
ET 200M
IM
Accessories
Page 3 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
DP/PA Coupler 6ES7 157-0AC00-0XA0 DP/PA coupler 04/00
DP/PA Coupler 6ES7 157-0AC80-0XA0 DP/PA coupler not Ex, outdoor, 400 mA 05/04
DP/PA Coupler 6ES7 157-0AC81-0XA0 DP/PA coupler not Ex, outdoor, 400 mA 04/05
DP/PA Coupler 6ES7 157-0AC82-0XA0 DP/PA coupler not Ex, outdoor, 1000 mA, 31 V
DP/PA Coupler 6ES7 157-0AC83-0XA0 DP/PA coupler not Ex, outdoor, redundancy A
DP/PA Coupler 6ES7 157-0AD00-0XA0 DP/PA coupler, Ex(i) 07/01
DP/PA Coupler 6ES7 157-0AD80-0XA0 DP/PA coupler, Ex(ib), extended environmental
conditions
12/03
DP/PA Coupler Ex 6ES7 157-0AD81-0XA0 DP/PA coupler, extended environmental conditions
(ia), FM approval
05/04
DP/PA Coupler Ex 6ES7 157-0AD82-0XA0 DP/PA coupler, extended environmental conditions
(ia), FM approval, Dust approval
BM DP/PA Coupler 6ES7 195-7HF80-0XA0 Bus module for the DP/PA coupler (double width)
BM DP/PA Coupler 6ES7 195-7HG80-0XA0 Bus module for redundant DP/PA coupler
Active Field Distributor 6ES7 157-0AF81-0XA0 SIMATIC DP, ACTIVE FIELD DISTRIBUTOR
AFD FOR PROFIBUS PA RING RED.
Active Field Splitter 6ES7 157-0AF82-0XA0 SIMATIC DP, ACTIVE FIELD DISTRIBUTOR
AFS FOR PROFIBUS PA COUPLER RED.
IM157 6ES7 157-0AA80-0XA0 IM157, Interface module for PROFIBUS-PA;
extended temperature range -25 °C to +60 °C
X X 06/00
IM157 6ES7 157-0AA81-0XA0 IM157-2, Interface module for PROFIBUS PA,
extended temperature range-25 °C to +60 °C
X X 12/03
IM157 6ES7 157-0AA82-0XA0 V4.x DP/PA link, DPV1 to DP and PA, module
replacement in RUN, reporting function, FW update
via bus, extension of process control functions.
XS
IM 153-2 CU 6ES7 153-2BA01-0XB0 V4.x DP/PA Link, DPV1 to DP and PA, module
replacement in RUN, reporting function, FW update
via bus, extension of process control functions
XS
IM 153-2 CU Outdoor 6ES7 153-2BA81-0XB0 V4.x DP/PA Link Outdoor, DPV1 to DP and PA, module
replacement in RUN, reporting function, FW update
via bus, extension of process control functions
XS
IM 153-2 CU 6ES7 153-2BA02-0XB0 V5.x DP/PA-Link, DPV1 to DP and PA, module
replacement in RUN, reporting function, FW update
via bus, extension of process control functions
XS
IM 153-2 CU Outdoor 6ES7 153-2BA82-0XB0 V5.x DP/PA-Link Outdoor, DPV1 to DP and PA, module
replacement in RUN, reporting function, FW update
via bus, extension of process control functions,
supports operation of up to 12 I/O modules
XS
Bus module 6ES7 195-7HE80-0XA0 Bus module for IM157
BM IM/IM 6ES7 195-7HD10-0XA0 Bus module IM157 / IM 153-2;
IM / IM for redundant IM operation;
BM IM/IM 6ES7 195-7HD80-0XA0 Bus module IM157 / IM 153-2;
IM / IM for redundant IM operation;
extended temperature range
Y Coupler 6ES7 654-0YK00-0AB0 Y coupler; Y switch for connecting
single-channel I/O to the H system,
simple switch
Bus Module 6ES7 654-7HY00-0XA0 Bus module for Y switch
RS485 Repeater 6ES7 972-0AA01-0XA0 RS485 REPEATER FOR THE CONNECTION OF
PROFIBUS/MPI BUS SYSTEMS, MAX. 31 NODES.
MAX. BAUD RATE 12 MBIT/S, DEGREE OF
PROTECTION IP20
Y Coupler 6ES7 197-1LB00-0XA0 Y coupler; Y switch for connecting a single-channel
I/O to the H system, simple interface with integrated
RS485 REPEATER
Refer to the manual SIMATIC Bus Coupling DP/PA Link and Y link for information on valid combinations
of interfaces, couplers, bus modules and on available functions.
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Gatewa
y
PA Couplers
DP Link
Y Coupler
Page 4 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
PROFIBUS OLM P11 6GK1 503-2CA00 V4.x SIMATIC NET, PB OLM/P11 V4.0 OPTICAL LINK
MODULE W. 1 RS485 AND 1 PLASTIC-FOC-
INTERFACE (2 BFOC-SOCKETS), WITH SIGNAL.
CONTACT AND MEASURING OUTPUT, 2 BFOC-
CONNECTORS INCLUDED
PROFIBUS OLM P12 6GK1 503-3CA00 V4.x SIMATIC NET, PB OLM/P12 V4.0 OPTICAL LINK
MODULE W. 1 RS485 AND 2 PLASTIC-FOC-
INTERFACE (4 BFOC-SOCKETS), WITH SIGNAL.
CONTACT AND MEASURING OUTPUT, 4 BFOC-
CONNECTORS INCLUDED
PROFIBUS OLM G11 6GK1 503-2CB00 V4.x SIMATIC NET, PB OLM/G11 V4.0 OPTICAL LINK
MODULE W. 1 RS485 AND 1 GLASS-FOC-
INTERFACE (2 BFOC-SOCKETS); WITH SIGNAL.
CONTACT AND MEASURING OUTPUT
PROFIBUS OLM G12 6GK1 503-3CB00 V4.x SIMATIC NET, PROFIBUS OLM/G12 V4.0 OPTICAL
LINK MODULE W. 1 RS485 AND 2 GLASS-FOC-
INTERFACES (4 BFOC-SOCKETS) FOR
STANDARD DISTANCES UP TO 2850 M, WITH
WITH SIGNAL. CONTACT AND MEASURING
OUTPUT
PROFIBUS OLM G12-
EEC
6GK1 503-3CD00 V4.x SIMATIC NET, PB OLM/G12-EEC V4.0 OPTICAL
LINK MODULE W. 1 RS485 AND 2 GLASS-FOC-
INTERFACES (4 BFOC-SOCKETS) FOR
EXTENDED TEMPERATURE RANGE -20..+60 DGR
PROFIBUS OLM G11-
1300
6GK1 503-2CC00 V4.x SIMATIC NET,PB OLM/G11-1300V4.0 OPTICAL
LINK MODULE W. 1 RS485 AND 1 GLASS-FOC-
INTERFACE (2 BFOC-SOCKETS),1300NM WAVE
LENGTH FOR GREAT DISTANCES WITH SIGNAL.
CONTACT AND MEASURING OUTPUT
PROFIBUS OLM G12-
1300
6GK1 503-3CC00 V4.x SIMATIC NET, PB OLM/G12-1300 V4.0 OPTICAL
LINK MODULE W. 1 RS485 AND 2 GLASS-FOC-
INTERFACES (4 BFOC-SOCKETS),1300NM WAVE
LENGTH FOR GREAT DISTANCES WITH SIGNAL.
CONTACT AND MEASURING OUTPUT
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
OLM
Page 5 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
2 AI 2 WIRE 6ES7 134-5RB00-0AB0 Analog input module AI 2xI, 2-wire-MU (0..20 mA / 12
bits + sign, 4..20 mA/ 12 bits)
X
2 AI 4 WIRE 6ES7 134-5RB50-0AB0 Analog input module AI 2xI, 4-wire-MU (0..20mA / 12
bits
,
4..20 mA/ 12bit
)
X
2 AI TC 6ES7 134-5SB00-0AB0 Analog input module AI 2xTC / 15 bits + sign,
standard,
thermocouples: E, N, J, K, L, S, R, B, T, U
X
2 AI RTD 6ES7 134-5SB50-0AB0 Analog input module AI 2xRTD / 15 bits + sign,
Standard, R: 600 ohms; RTD: Pt100, Ni100
X
2 AI 2 WIRE HART 6ES7 134-5TB00-0AB0 Analog input module AI2x4..20mA, with HART
communication for the connection of 2-wire MU
X
2 AI 4 WIRE HART 6ES7 134-5TB50-0AB0 Analog input module 2AI 4..20 mA, with HART
communication for the connection of 4-wire MU
X
2 AO 0/4-20mA 6ES7 135-5RB00-0AB0 Analog output module 2AO 0..20 mA / 12 bits + sign,
4..20mA/ 12 bits)
X
2 AO HART 6ES7 135-5TB00-0AB0 Analog output module 2AO 4..20 mA, with HART
communication
X
4 DI NAMUR 6ES7 131-5RD00-0AB0 Digital input module 4DI NAMUR X
2 DO 6ES7 132-5SB00-0AB0 Digital output module 2DO 25 VDC/25 mA X
ET200iS-IM151-2 6ES7 151-2AA00-0AB0 Interface module for ET 200iS electronic modules for
intrinsically safe PROFIBUS-DP
XX
PS 6ES7 138-5EA00-0AA0 Power supply for ET 200iS
TM-E30S-44iS 6ES7 193-5CB00-0AA0 Terminal module for EMs, 4 terminal strips, screw
terminals
TM-E30C-44iS 6ES7 193-5CB10-0AA0 Terminal module for EMs, 4 terminal strips, spring-
loaded terminals
TM-PS-iS 6ES7 193-5DA00-0AA0 Terminal module for PS
TM-IM-iS 6ES7 193-5DB00-0AA0 Terminal module for IM 151-2
4 AI I 2WIRE HART 6ES7 134-7TD00-0AB0 Analog input module, 4AI 4..20 mA, with HART
communication for the connection of 2-wire MU
XM
4 AI I 4WIRE HART 6ES7 134-7TD50-0AB0 Analog input module 4AI 4..20 mA, with HART
communication for the connection of 4-wire MU
XM
4 AI TC 6ES7 134-7SD00-0AB0 Analog input module AI 4xTC X M
4 AI RTD 6ES7 134-7SD50-0AB0 Analog input module AI 4xRTD X M
4 AI RTD 6ES7 134-7SD51-0AB0 Analog input module AI 4xRTD X M
4 F-AI 4x0/4...20mA,
HART
6ES7 138-7FA00-0AB0 Analog input module F-AI 4x0/4...20mA, HART,
safety-oriented, Ex i
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
ET 200iSP
AI
TM
IM
PS
ET 200iS
AI
AO
DI
DO
Page 6 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
4 AO I HART 6ES7 135-7TD00-0AB0 Analog input module 4AO 4..20 mA, with HART
communication
XM
8 DI NAMUR 6ES7 131-7RF00-0AB0 Digital input module 8DI NAMUR X M
8 F-DI NAMUR 6ES7 138-7FN00-0AB0 Digital input module, F-DI 8 NAMUR, safety-oriented,
Ex i
X
4 DO DC23.1V/20mA 6ES7 132-7RD00-0AB0 Digital output module 4DO 23.1 VDC/20 mA X M 10/06
4 DO DC23.1V/20mA
Shutdown "H"
6ES7 132-7RD01-0AB0 Digital output module 4DO 23.1 VDC/20 mA
Shutdown "H"
XM
4 DO DC17.4V/27mA 6ES7 132-7RD10-0AB0 Digital output module 4DO 17.4 VDC/27 mA X M 10/06
4 DO DC17.4V/27mA
Shutdown "H"
6ES7 132-7RD11-0AB0 Digital output module 4DO 17.4 VDC/27 mA
Shutdown "H"
XM
4 DO DC17.4V/40mA 6ES7 132-7RD20-0AB0 Digital output module 4DO 17.4 VDC/40 mA X M 10/06
4 DO DC17.4V/40mA
Shutdown "H"
6ES7 132-7RD21-0AB0 Digital output module 4DO 17.4 VDC/40 mA
Shutdown "H"
XM
4 DO DC17.4V/40mA
Shutdown "H"
6ES7 132-7RD22-0AB0 Digital output module 4DO 17.4 VDC/40 mA
Shutdown "H"
XM
4 DO DC23.1V/20mA
Shutdown "L"
6ES7 132-7GD00-0AB0 Digital output module 4DO 23.1 VDC/20 mA
Shutdown "L"
XM
4 DO DC17.4V/27mA
Shutdown "L"
6ES7 132-7GD10-0AB0 Digital output module 4DO 17.4 VDC/27 mA
Shutdown "L"
XM
4 DO DC17.4V/40mA
Shutdown "L"
6ES7 132-7GD20-0AB0 Digital output module 4DO 17.4 VDC/40 mA
Shutdown "L"
XM
4 DO DC17.4V/40mA
Shutdown "L"
6ES7 132-7GD21-0AB0 Digital output module 4DO 17.4 VDC/40 mA
Shutdown "L"
XM
4 DO DC25.5V/22mA
Shutdown "L"
6ES7 132-7GD30-0AB0 Digital output module 4DO 25.5 VDC/22 mA
Shutdown "L"
XM
2 DO relays UC60V/2A 6ES7 132-7HB00-0AB0 Digital output module DO 2 x relay UC60V/2A X M
4 F-DO 4x17,4V/40mA 6ES7 138-7FD00-0AB0 Digital output module, F-DO 4x17,4V/40mA, P
switching, safety-oriented, Ex i
X
ET200iSP-IM152-1 6ES7 152-1AA00-0AB0 Interface module for ET 200iSP electronic modules
for intrinsically safe PROFIBUS DP
XS
ET200iSP-IM152-1 6ES7 152-1AA00-0AB0 V2.0. Interface module for ET 200iSP
Electronic module for intrinsically safe PROFIBUS
DP,
redundant operation in H systems supported
XS
PS DC 24V 6ES7 138-7EA00-0AA0 Power supply module for ET 200iSP 07/06
PS DC 24V 6ES7 138-7EA01-0AA0 Power supply module for ET 200iSP
PS AC 120/230V 6ES7 138-7EC00-0AA0 Power supply module for ET 200iSP
EM Standby module 6ES7 138-7AA00-0AA0 Standby module for unused slots
Watchdog module 6ES7 138-7BB00-0AB0 Special module for station monitoring X M
RS 485-IS Coupler 6ES7972-0AC80-0XA0 Fieldbus coupler for interfacing PROFIBUS DP and
RS 485-IS, for controlling intrinsically safe Profibus
nodes. Installation in Zone 2 is possible. Extended
temperature range. Protection class IP20
TM-EM/EM 60 S 6ES7 193-7CA00-0AA0 Terminal module for 2 EMs, screw terminals
TM-EM/EM 60 C 6ES7 193-7CA10-0AA0 Terminal module for 2 EMs, spring-loaded terminals
TM-EM relays C 6ES7193-7CB00-0AA0 Terminal module EM relays, screw terminals
TM-IM/EM 60 S 6ES7 193-7AA00-0AA0 Terminal module for IM/EM, screw terminals
TM-IM/EM 60 C 6ES7 193-7AA10-0AA0 Terminal module for IM/EM, spring-loaded terminals
TM-IM/IM 6ES7 193-7AB00-0AA0 Terminal module for redundant IM
TM-PS-A 6ES7 193-7DA00-0AA0 Terminal module for power supply
TM-PS-B 6ES7 193-7DB00-0AA0 Terminal module for redundant power supply
TM-PS-A 6ES7 193-7DA10-0AA0 Terminal module for power supply
TM-PS-B 6ES7 193-7DB10-0AA0 Terminal module for redundant power supply
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
ET 200iSP
AO
DI
IM
DO
TM
Watchdog
PS
EM
Coupler
Page 7 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
2 AI V 6ES7 134-4FB00-0AB0 Analog input module AI 2xV (+/-5 V, 1V to 5 V, +/-10
V) / 13 bits, standard
X 07/05
2 AI V 6ES7 134-4FB01-0AB0 1) Analog input module AI 2xV (+/-5 V, 1V to 5 V, +/-10
V) / 13 bits, standard
X
2 AI I 2DMU 6ES7 134-4GB00-0AB0
A
nalog input module AI 2xI, 2-wire MU (4..20 mA) / 1
3
bits, standard
X 04/05
2 AI I 2DMU 6ES7 134-4GB01-0AB0 1)
A
nalog input module AI 2xI, 2-wire MU (4..20 mA) / 1
3
bits, standard
X
2 AI I 4DMU 6ES7 134-4GB10-0AB0 Analog input module AI 2xI, 4-wire MU (+/-20 mA,
4..20 mA) / 13 bits, standard
X 05/05
2 AI I 4DMU 6ES7 134-4GB11-0AB0 1) Analog input module AI 2xI, 4-wire MU (+/-20 mA,
4..20 mA) / 13 bits, standard
X
2 AI I TC 6ES7 134-4JB00-0AB0 Analog input module AI 2xTC / 15 bits, standard X
2 AI I TC 6ES7 134-4JB01-0AB0 Analog input module AI 2xTC / 15 bits, standard X
2 AI I RTD 6ES7 134-4JB50-0AB0 Analog input module AI 2xRTD / 15 bits, standard X
2 AI I RTD 6ES7 134-4JB51-0AB0 Analog input module AI 2xRTD / 15 bits, standard X
2 AI V 6ES7 134-4LB00-0AB0 Analog input module AI 2xV (+/-5 V, 1V to 5 V, +/- 10
V) / 15 bits, high resolution
X 06/06
2 AI V 6ES7 134-4LB02-0AB0 Analog input module AI 2xV (+/-5 V, 1V to 5 V, +/- 10
V) / 15 bits, high resolution
X
2 AI I 6ES7 134-4MB00-0AB0 Analog input module AI 2xI (+/-20 mA, 4..20 mA) / 15
bits, high resolution
X 06/06
2 AI I 6ES7 134-4MB02-0AB0 Analog input module AI 2xI (+/-20 mA, 4..20 mA) / 15
bits, high resolution
X
2 AI I TC
High Feature
6ES7 134-4NB00-0AB0 2 AI I TC High Feature; analog input module AI 2xTC
15 bits, high feature
X 09/05
2 AI I TC
High Feature
6ES7 134-4NB01-0AB0 2 AI I TC High Feature; analog input module AI
2xTC / 15 bits, high feature
X
2 AI I RTD
High Feature
6ES7 134-4NB50-0AB0 2 AI I RTD High Feature; analog input module AI
2xRTD / 15 bits, high feature
X 11/05
2 AI I RTD
High Feature
6ES7 134-4NB51-0AB0 2 AI I RTD High Feature; analog input module AI
2xRTD / 15 bits, high feature
X
2 AO V 6ES7 135-4FB00-0AB0 Analog output module AO 2xV (1 V to 5 V / 12 bits, +/-
10 V / 13 bits), standard
X 05/05
2 AO V 6ES7 135-4FB01-0AB0 Analog output module AO 2xV (1 V to 5 V / 12 bits, +/-
10 V / 13 bits), standard
X
2 AO I 6ES7 135-4GB00-0AB0 Analog output module AO 2xI (+/-20 mA, 4..20 mA) /
13 bits, standard
X 05/05
2 AO I 6ES7 135-4GB01-0AB0 Analog output module AO 2xI (+/-20 mA, 4..20 mA) /
13 bits, standard
X
2 AO V 6ES7 135-4LB00-0AB0 Analog output module AO 2xV (1 V to 5 V, +/-10 V) /
15 bits, high resolution
X 08/03
2 AO V 6ES7 135-4LB01-0AB0 Analog output module AO 2xV (1 V to 5 V, +/- 10V) /
15 bits, high resolution, isochronous mode supported.
X 06/06
2 AO V 6ES7 135-4LB02-0AB0 Analog output module AO 2xV (1 V to 5 V, +/-10V) /
15 bits, high resolution, isochronous mode supported.
X
2 AO I 6ES7 135-4MB00-0AB0 Analog output module AO 2xI (+/-20 mA, 4..20 mA) /
15 bits, high resolution
X 08/03
2 AO I 6ES7 135-4MB01-0AB0 Analog output module AO 2xI (+/-20 mA, 4..20 mA) /
15 bits, high resolution, isochronous mode supported.
X 06/06
2 AO I 6ES7 135-4MB02-0AB0 Analog output module AO 2xI (+/-20 mA, 4..20 mA) /
15 bits, high resolution, isochronous mode supported.
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
AI
AO
ET 200S
Page 8 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
2 DI DC24V 6ES7 131-4BB00-0AA0 2 DI DC24V; digital input module 2DI 24 VDC,
standard
X 04/05
2 DI DC24V 6ES7 131-4BB01-0AA0 2 DI DC24V; digital input module 2DI 24 VDC,
standard
X
4 DI DC24V 6ES7 131-4BD00-0AA0 4 DI DC24V; digital input module 4DI 24 VDC,
standard
X 04/05
4 DI DC24V 6ES7 131-4BD01-0AA0 4 DI DC24V; digital input module 4DI 24 VDC,
standard
X
2 DI DC24V High
Feature
6ES7 131-4BB00-0AB0 Digital input module 2DI 24 VDC, High Feature; with
diagnostics function
X 06/05
2 DI DC24V High
Feature
6ES7 131-4BB01-0AB0 Digital input module 2DI 24 VDC, High Feature; with
diagnostics function
X
4 DI DC24V High
Feature
6ES7 131-4BD00-0AB0 Digital input module 4DI 24 VDC, High Feature; with
diagnostics function
X 05/05
4 DI DC24V High
Feature
6ES7 131-4BD01-0AB0 Digital input module 4DI 24 VDC, High Feature; with
diagnostics function
X
8 DI DC24V High Speed 6ES7 131-4BF00-0AA0 Digital input module 8DI 24 VDC, supports
isochronous mode
X
4DI 6ES7 131-4CD00-0AB0 4DI; digital input module 4 DI 24 V UC to 48V UC,
High Feature; with diagnostics function
X
4 DI UC 24..48V HF 6ES7 131-4CD02-0AB0 4DI; digital input module 4 DI 24 V UC to 48V UC,
High Feature; with diagnostics function
X
2 DI AC 120V 6ES7 131-4EB00-0AB0 2 DI AC 120V, digital input module 2DI 120 VAC X
2 DI AC 230V 6ES7 131-4FB00-0AB0 2 DI AC 230V; digital input module 2DI 120 VAC X
4 DI NAMUR 6ES7 131-4RD00-0AB0 4 DI NAMUR; with diagnostics function X 10/10
4 DI NAMUR 6ES7 131-4RD02-0AB0 4 DI DC 24V NAMUR; with diagnostics function X
4/8 F-DI DC 24V 6ES7 138-4FA00-0AB0 8 DI DC 24V; digital input module 4/8DI 24 VDC, 8 DI
safety-oriented SIL-2 or 4 DI safety-oriented SIL-3,
with diagnostics function
X 06/04
4/8 F-DI DC 24V 6ES7 138-4FA01-0AB0 8 DI DC 24V; digital input module 4/8DI 24 VDC, 8 DI
safety-oriented SIL-2 or 4 DI safety-oriented SIL-3,
with diagnostics function
X 10/05
4/8 F-DI DC 24V 6ES7 138-4FA02-0AB0 8 DI DC 24V; digital input module 4/8DI 24 VDC, 8 DI
safety-oriented SIL-2 or 4 DI safety-oriented SIL-3,
with diagnostics function
X 01/07
4/8 F-DI DC 24V 6ES7 138-4FA03-0AB0 8 DI DC 24V; digital input module 4/8DI 24 VDC, 8 DI
safety-oriented SIL-2 or 4 DI safety-oriented SIL-3,
with diagnostics function
X
4/8 F-DI DC 24V 6ES7 138-4FA04-0AB0 8 DI DC 24V; digital input module 4/8DI 24 VDC, 8 DI
safety-oriented SIL-2 or 4 DI safety-oriented SIL-3,
with diagnostics function
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
DI
Page 9 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
2 DO DC24V/0.5A 6ES7 132-4BB00-0AA0 2DO DC24V/0.5 A; digital output module 2DO 24
VDC/0.5 A, standard
X 04/05
2 DO DC24V/0.5A 6ES7 132-4BB01-0AA0 2 DO DC24V/0.5A; digital output module 2DO 24
VDC/0.5 A, standard
X
2 DO DC24V/2A 6ES7 132-4BB30-0AA0 2 DO DC24V/2A; digital output module 2DO 24
VDC/2 A, standard
X 04/05
2 DO DC24V/2A 6ES7 132-4BB31-0AA0 2 DO DC24V/2A; digital output module 2DO 24
VDC/2 A, standard
X
2 DO DC24V/0.5A High
Feature
6ES7 132-4BB00-0AB0 Digital output module 2DO 24 VDC/0.5 A, High
Feature, with diagnostics function
X 09/05
2 DO DC24V/0.5A High
Feature
6ES7 132-4BB01-0AB0 Digital output module 2DO 24 VDC/0.5 A, High
Feature, with diagnostics function
X
2 DO DC24V/2A High
Feature
6ES7 132-4BB30-0AB0 Digital output module 2DO 24 VDC/2 A, High Feature
,
with diagnostics function
X 07/05
2 DO DC24V/2A High
Feature
6ES7 132-4BB31-0AB0 Digital output module 2DO 24 VDC/2 A, High Feature
,
with diagnostics function
X
4 DO DC24V/0.5A 6ES7 132-4BD00-0AA0 4 DO DC24V/0.5A; digital output module 4DO 24
VDC/0.5 A, standard
X 05/05
4 DO DC24V/0.5A High
Feature
6ES7 132-4BD00-0AB0 4 DO DC24V/0.5A; digital output module 4DO 24
VDC/0.5 A, High Feature, with diagnostics function
X
4 DO DC24V/0.5A 6ES7 132-4BD01-0AA0 4 DO DC24V/0.5A; digital output module 4DO 24
VDC/0.5 A, standard
X
4 DO DC24V/0.5A 6ES7 132-4BD02-0AA0 4 DO DC24V/0.5A; digital output module DO
4xDC24V/0.5A, standard
X
4 DO DC24V/2A 6ES7 132-4BD30-0AA0 4 DO DC24V/2A; digital output module 4DO 24
VDC/2 A, standard
X 04/05
4 DO DC24V/2A
High Feature
6ES7 132-4BD30-0AB0 4 DO DC24V/2A; digital output module 4DO 24
VDC/2 A, High Feature, with diagnostics
function
X
4 DO DC24V/2A 6ES7 132-4BD31-0AA0 4 DO DC24V/2A; digital output module 4DO 24
VDC/2 A, standard
X 05/07
4 DO DC24V/2A 6ES7 132-4BD32-0AA0 4 DO DC24V/2A; digital output module 4DO 24
VDC/2 A, standard
X
8 DO DC24V/0.5A
High Speed
6ES7 132-4BF00-0AA0 8 DO DC24V/0.5A; digital output module DO
8xDC24V/0.5A, supports isochronous mode
X
8 DO DC24V/0.5A
High Feature
6ES7 132-4BF00-0AB0 8 DO DC24V/0.5A; digital output module DO
8xDC24V/0.5A, supports isochronous mode, High
Feature, with diagnostics function
X
2 DO AC 120/230V/ 1A 6ES7 132-4FB00-0AB0 2 DO AC 120/230V/ 1A; digital output module 2DO
120 VAC/230 VAC, 1 A
X 01/07
2 DO AC 120/230V/ 1A 6ES7 132-4FB01-0AB0 2 DO AC 120/230V/ 1A; digital output module 2DO
120 VAC/230 VAC, 1 A
X
2 DO Rel. 24..230V/5A 6ES7 132-4HB00-0AB0 2 DO Rel. 24..230V/5A; digital output module
2xRel. UC 24 V to 230 V/5 A
X 04/05
2 DO Rel. 24..230V/5A 6ES7 132-4HB01-0AB0 2 DO Rel. 24..230V/5A; digital output module
2xrel. UC 24 V to 230 V/5 A
X
2 DO Rel. 24..230V/5A 6ES7 132-4HB10-0AB0 2 DO Rel. 24..230V/5A; digital output module
2xRel. design C, UC 24 V to 230 V/5 A
X
2 DO Rel. 24..230V/5A 6ES7 132-4HB12-0AB0 2 DO Rel. 24..230V/5A; digital output module
2xRel. design C, UC 24 V to 230 V/5 A
X
4 DO DC 24V/2A 6ES7 138-4FB00-0AB0 4 DO DC 24V/2A; digital output module 4DO 24
VDC/2 A, safety-oriented up to SIL-3, with diagnostic
s
function, PM switching
X 06/04
4 DO DC 24V/2A 6ES7 138-4FB01-0AB0 4 DO DC 24V/2A; digital output module 4DO 24
VDC/2 A, safety-oriented up to SIL-3, with diagnostic
s
function, PM switching
X 10/05
4 DO DC 24V/2A 6ES7 138-4FB02-0AB0 4 DO DC 24V/2A; digital output module 4DO 24
VDC/2 A, safety-oriented up to SIL-3, with diagnostic
s
function, PM switching
X
4 DO DC 24V/2A 6ES7 138-4FB03-0AB0 4 DO DC 24V/2A; digital output module DO
4xDC24V/2A, safety-oriented up to SIL-3, with
diagnostics function, PM switching
X
Counter module,
24 V/100 kHz
6ES7138-4DA04-0AB0 Counter module, 24 V/100 kHz
for single, infinite and periodic counting, supports
isochronous mode;
(only counting mode and measuring mode are
permitted in PCS 7)
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
FM
DO
Page 10 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
IM151-1 6ES7 151-1BA00-0AB0 Interface module IM151-1 for ET 200S, High Feature X X 10/05
IM151-1 6ES7 151-1BA01-0AB0 Interface module IM151-1 for ET 200S, high feature X X 03/07
IM151-1 6ES7 151-1BA02-0AB0 Interface module IM151-1 for ET 200S, high feature X X
PM-E DC24V 6ES7 138-4CA00-0AA0 Power module PM-E, 24 VDC, with diagnostics
function
X 04/05
PM-E DC24V 6ES7 138-4CA01-0AA0 Power module PM-E, 24 VDC, with diagnostics
function
X
PM-E DC24V HF 6ES7 138-4CA60-0AB0 Power module PM-E, 24 VDC, with diagnostics
function, high feature
X
PM-E DC24V/
AC120/230V
6ES7 138-4CB10-0AB0 PM-E DC24V/ AC120/230V; with diagnostics function
and fuse
X 11/06
PM-E DC24V..48/
AC24..230V
6ES7 138-4CB11-0AB0 PM-E DC24..48V/ AC24..230V; with diagnostics
function and fuse
X
PM-E F pm DC24V 6ES7 138-4CF00-0AB0 Power module PM-E, 24 VDC, safety-oriented with
2DO 24 VDC PM potential with diagnostics function
X 06/04
PM-E F pm DC24V 6ES7 138-4CF01-0AB0 Power module PM-E, 24 VDC, safety oriented with
2DO 24 V PM switching; with diagnostics function
X 10/05
PM-E F pm DC24V 6ES7 138-4CF02-0AB0 Power module PM-E, 24 VDC, safety-oriented, with
2DO 24 V PM switching; with diagnostics function
X
PM-E F pm DC24V 6ES7 138-4CF03-0AB0 Power module PM-E, 24 VDC, safety-oriented, with 2
DO 24V PM switching; with diagnostics function
X
PM-E DC24V 6ES7 138-4CF42-0AB0 Power module PM-E, 24 VDC, safety-oriented, PP
switching; with diagnostics function
X
PM-D DC24V 3RK1 903-0BA00 PM-D DC24V; power module; PM-D; 2x24 VDC X
PM-D F1 SIGUARD 3RK1 903-1BA00 PM-D F1 SIGUARD; power module; EMERGENCY
STOP; monitored start; 2 channels
X
PM-D F2 SIGUARD 3RK1 903-1BB00 PM-D F2 SIGUARD; power module; protective door;
auto start; 2 channel
X
PM-D F4 SIGUARD 3RK1 903-1BC00 PM-D F4 SIGUARD; power module; expansion to
F1/2 for further potential group
X
PM-D F3 SIGUARD 3RK1 903-1BD00 PM-D F3 SIGUARD; power module; expansion to
F1/2 for further potential group; time delay
X
PM-D F5 SIGUARD 3RK1 903-1BE00 PM-D F5 SIGUARD; power module; expansion to PM
D F1 up to PM-D F4, contact replicator
X
PM-X SIGUARD 3RK1 903-1CB00 PM-X, connection module for power supply contactor;
external safety circuits
X
PM-D F PROFIsafe 3RK1 903-3BA00 Power module PROFIsafe; PM-D F PROFIsafe; for 6
switching modules; safety-oriented
X
PM-D F PROFIsafe 3RK1 903-3BA01 Power module PROFIsafe; PM-D F PROFIsafe; for 6
switching modules; safety-oriented
X
PM-D F PROFIsafe 3RK1 903-3BA02 Power module PROFIsafe; PM-D F PROFIsafe; for 6
switching modules; safety-oriented
X
F-CM 3RK1 903-3CA00 Contact Multiplier F-CM; extension to PM-D F
PROFIsafe; contact multiplier
X
PM-D F X1 3RK1 903-3DA00 Power/extension module PM-D F X1; overvoltage
protection, for the input of external emergency OFF
signals; for 6 switching modules
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
PM
IM
Page 11 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
TM-E15x26-A1 6ES7 193-4CAx0-0AA0 Terminal module for electronic modules;
AUX busbar to next potential group on left;
terminal connection to AUX1 potential
TM-E15x24-A1 6ES7 193-4CAx0-0AA0 Terminal module for electronic modules;
AUX busbar to next potential group on left;
terminal connection to AUX1 potential
TM-E15x24-01 6ES7 193-4CBx0-0AA0 Terminal module for electronic modules;
AUX busbar to next potential group on left;
no terminal connection to AUX1 potential
TM-E15x23-01 6ES7 193-4CBx0-0AA0 Terminal module for electronic modules;
AUX busbar to next potential group on left;
no terminal connection to AUX1 potential
TM-E15x24-AT 6ES7 193-4CLx0-0AA0 Terminal module for electronic modules 2 AI TC HF;
AUX busbar to next potential group on left;
no terminal connection to AUX1 potential
TM-E30x46-A1 6ES7 193-4CFx0-0AA0 Terminal module for electronic modules;
AUX busbar to next potential group on left;
terminal connection to AUX1 potential
TM-E30x44-01 6ES7 193-4CGx0-0AA0 Terminal module for electronic modules;
AUX busbar to next
potential group on left;
no terminal connection to AUX1 potential
TM-P15x23-A1 6ES7 193-4CCx0-0AA0 Terminal module for power modules;
AUX busbar to next potential group on left;
terminal connection to AUX1 potential
TM-P15x23-A0 6ES7 193-4CDx0-0AA0 Terminal module for power modules;
interrupted AUX rail to next potential group on left;
terminal connection to AUX1 potential
TM-P15x22-01 6ES7 193-4CEx0-0AA0 Terminal module for power modules;
AUX busbar to next potential group on left;
no terminal connection to AUX1 potential
TM-P30x44-A0 6ES7 193-4CKx0-0AA0 Terminal module for fail-safe power modules
PM-E F; interrupted AUX busbar to next potential
group on left;
terminal connection to AUX1 potential
TM-P15S27-01 3RK1 903-0AA00 Terminal module for power module PM-D
with protective cover
TM-PF30S47-B1 3RK1 903-1AA00 Terminal module SIGUARD PM-D F 1.2
for potential group, supply voltage U1 and U2,
sensor connector
TM-PF30S47-B0 3RK1 903-1AA10 Terminal module SIGUARD PM-D F 1.2
for potential subgroup,
sensor connector
TM-PF30S47-C1 3RK1 903-1AC00 Terminal module SIGUARD PM-D F 3.4
for potential group, supply voltage U2
TM-PF30S47-C0 3RK1 903-1AC10 Terminal module SIGUARD PM-D F 3.4
for potential subgroup, supply voltage U2
TM-PF30S47-D0 3RK1 903-1AD10 Terminal module SIGUARD PM-D F 5
for contact multiplier
TM-X15 S27-01 3RK1 903-1AB00 Terminal module for connection module PM-X
connection unit for power supply relay
TM-PF30S47-F1 3RK1 903-3AA00 Terminal module for fail-safe power modules
PM-D F; AUX busbar to next potential group on left;
no terminal connection to AUX1 potential
TM-FCM30S47-E0 3RK1 903-3AB10 Terminal module for F-CM;
with U1 loop
TM-PFX30S47-G1 3RK1 903-3AE00 Terminal module for PM-D F X1;
for potential group; no U1 supply voltage from left
TM-PFX30S47-G0 3RK1 903-3AE10 Terminal module for PM-D F X1;
for potential group; U1 supply voltage from left
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
TM
Page 12 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
DS1e-x 0.3 - 3 A High
Feature
3RK1 301-0AB10-0AA2 DS1e-x 0.3 - 3 A; direct starter; mechanical switching;
electronic overload protection; no fuse protection up
to 1.1 KW/400 V; 0.30 A to 3.00 A. Options: brake
control module, control module; High Feature
X 05/04
DS1e-x 0.3 - 3 A High
Feature
3RK1 301-0AB10-0AA3 DS1e-x 0.3 - 3 A; direct starter; mechanical switching;
electronic overload protection; no fuse protection up
to 1.1 KW/400V; 0.30 A to 3.00 A. Options: brake
control module, control module; switch ES; High
Feature
X
DS1e-x 0.3 - 3 A High
Feature
3RK1 301-0AB10-0AA4 DS1e-x 0.3 - 3 A; direct starter; mechanical switching;
electronic overload protection; no fuse protection; to
1.1 KW/400 V; 0.30 A to 3.00 A. Options: brake
control module, control module; switch ES; High
Feature; programmable power switch message
X
DS1e-x 2.4 - 8 A High
Feature
3RK1 301-0BB10-0AA2 DS1e-x 2.4 - 8 A; direct starter; mechanical switching;
electronic overload protection; no fuse protection up
to 3.0 KW/400 V; 2.40 A to 8.00 A. Options: brake
control module, control module; High Feature
X 05/04
DS1e-x 2.4 - 8 A High
Feature
3RK1 301-0BB10-0AA3 DS1e-x 2.4 A to 8 A; direct starter; mechanical
switching; electronic overload protection; no fuse
protection up to 3.0 KW/400 V; 2.40 A to 8.00 A.
Options: brake control module, control module; High
Feature
X
DS1e-x 2.4 - 8 A High
Feature
3RK1 301-0BB10-0AA4 DS1e-x 2.4 - 8 A; direct starter; mechanical switching;
electronic overload protection; no fuse protection; to
3.0 KW/400 V; 2.40 A to 8.00 A. Options: brake
control module, control module; switch ES; High
Feature; programmable power switch message
X
DS1e-x 2.4 - 16 A High
Feature
3RK1 301-0CB10-0AA2 DS1e-x 2.4 - 16 A; direct starter; mechanical
switching; electronic overload protection; no fuse
protection; to 7.5 KW/400 V; 2.40 A to 16 A. Options:
brake control module, control module; switch ES;
High Feature
X 05/04
DS1e-x 2.4 - 16 A High
Feature
3RK1 301-0CB10-0AA3 DS1e-x 2.4 - 16 A; direct starter; mechanical
switching; electronic overload protection; no fuse
protection; to 7.5 KW/400 V; 2.40 A to 16 A. Options:
brake control module, control module; switch ES;
High Feature
X
DS1e-x 2.4 - 16 A High
Feature
3RK1 301-0CB10-0AA4 DS1e-x 2.4 - 16 A; direct starter; mechanical
switching; electronic overload protection; no fuse
protection; to 7.5 KW/400 V; 2.40 A to 16 A. Options:
brake control module, control module; switch ES;
High Feature; programmable power switch message
X
DSS1e-x 0.3 - 3 A High
Feature
3RK1 301-0AB20-0AA2 DSS1e-x 0.3 - 3 A; direct soft starter; mechanical
switching; electronic overload protection; no fuse
protection up; to 1.1 KW/400 V; 0.30 A to 3.00 A.
Options: brake control module, control module; switch
ES; High Feature
X 05/04
DSS1e-x 0.3 - 3 A High
Feature
3RK1 301-0AB20-0AA3 DSS1e-x 0.3 - 3 A; direct soft starter; mechanical
switching; electronic overload protection; no fuse
protection up; to 1.1 KW/400 V; 0.30 A to 3.00 A.
Options: brake control module, control module; switch
ES; High Feature
X
DSS1e-x 0.3 - 3 A High
Feature
3RK1 301-0AB20-0AA4 DSS1e-x 0.3 - 3 A; direct starter; mechanical
switching; electronic overload protection; no fuse
protection; to 1.1 KW/400 V; 0.30 A to 3.00 A.
Options: brake control module, control module; switch
ES; High Feature
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Motor Starter
Page 13 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
DSS1e-x 2.4 - 8 A High
Feature
3RK1 301-0BB20-0AA2 DSS1e-x 2.4 - 8 A; direct starter; mechanical
switching; electronic overload protection; no fuse
protection; to 3.0 KW/400 V; 2..40 A to 8.00 A;
Option: brake control module, control module; High
Feature
X 05/04
DSS1e-x 2.4 - 8 A High
Feature
3RK1 301-0BB20-0AA3 DSS1e-x 2.4 - 8 A; direct starter; mechanical
switching; electronic overload protection; no fuse
protection; to 3.0 KW/400 V; 2.40 A to 8.00 A; Option:
brake control module, control module; switch ES;
High Feature
X
DSS1e-x 2.4 - 8 A High
Feature
3RK1 301-0BB20-0AA4 DSS1e-x 2.4 - 8 A; direct starter; mechanical
switching; electronic overload protection; no fuse
protection; to 3.0 KW/400 V; 2.40 A to 8.00 A.
Options: brake control module, control module; switch
ES; High Feature
X
DSS1e-x 2.4 - 16 A High
Feature
3RK1 301-0CB20-0AA2 DSS1e-x 2.4 - 16 A; direct starter; mechanical
switching; electronic overload protection; no fuse
protection up to 7.5 KW/400 V; 2.40 A to 16 A.
Options: brake control module, control module; High
Feature
X 05/04
DSS1e-x 2.4 - 16 A High
Feature
3RK1 301-0CB20-0AA3 DSS1e-x 2.4 - 16 A; direct starter; mechanical
switching; electronic overload protection; no fuse
protection up to 7.5 KW/400 V; 2.40 A to 16 A.
Options: brake control module, control module; High
Feature
DSS1e-x 2.4 - 16 A High
Feature
3RK1 301-0CB20-0AA4 DSS1e-x 2.4 - 16 A; direct starter; mechanical
switching; electronic overload protection; no fuse
protection; to 7.5 KW/400 V; 2.40 A to 16 A. Options:
brake control module, control module; switch ES;
High Feature
RS1e-x (0.3 - 3A) High
Feature
3RK1 301-0AB10-1AA2 RS1e-x (0.3 - 3A) High Feature; reversing starter;
mechanical switching; electronic overload protection;
no fuse protection; to 1.1 KW/400 V; 0.30 A to 3.00 A.
Options: brake control module, Control Module; High
Feature
X 05/04
RS1e-x (0.3 - 3A) High
Feature
3RK1 301-0AB10-1AA3 RS1e-x (0.3 - 3A) High Feature; reversing starter;
mechanical switching; electronic overload protection;
no fuse protection; to 1.1 KW/400 V; 0.30 A to 3.00 A.
Options: brake control module, Control Module; High
Feature
X
RS1e-x (0.3 - 3A) High
Feature
3RK1 301-0AB10-1AA4 RS1e-x (0.3 - 3A) High Feature; reversing starter;
mechanical switching; electronic overload protection;
no fuse protection; to 1.1 KW/400 V; 0.30 A to 3.00 A.
Options: brake control module, control module; switch
ES; High Feature; programmable power switch
message
X
RS1e-x (2.4 - 8A) High
Feature
3RK1 301-0BB10-1AA2 RS1e-x (2.4 - 8A) High Feature; reversing starter;
mechanical switching; electronic overload protection;
no fuse protection; to 3.0 KW/400 V; 2.40 A to 8.00 A.
Options: brake control module, control module; High
Feature
X 05/04
RS1e-x (2.4 - 8A) High
Feature
3RK1 301-0BB10-1AA3 RS1e-x (2.4 - 8A) High Feature; reversing starter;
mechanical switching; electronic overload protection;
no fuse protection; to 3.0 KW/400 V; 2.40 A to 8.00 A.
Options: brake control module, control module; High
Feature
X
RS1e-x (2.4 - 8A) High
Feature
3RK1 301-0BB10-1AA4 RS1e-x (2.4 - 8A) High Feature; reversing starter;
mechanical switching; electronic overload protection;
no fuse protection; to 3.0 KW/400 V; 2.40 A to 8.00 A.
Options: brake control module, control module; switch
ES; High Feature; programmable power switch
message
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Motor Starter
Page 14 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
RS1e-x (2.4 - 16A) High
Feature
3RK1 301-0CB10-1AA2 RS1e-x (2.4 - 16A) High Feature; reversing starter;
mechanical switching; electronic overload protection;
no fuse protection; to 7.5 KW/400 V; 2.40 A to 16 A.
Options: brake control module, control module; High
Feature
X 05/04
RS1e-x (2.4 - 16A) High
Feature
3RK1 301-0CB10-1AA3 RS1e-x (2.4 - 16A) High Feature; reversing starter;
mechanical switching; electronic overload protection;
no fuse protection; to 7.5 KW/400 V; 2.40 A to 16 A.
Options: brake control module, control module; High
Feature
X
RS1e-x (2.4 - 16A) High
Feature
3RK1 301-0CB10-1AA4 RS1e-x (2.4 - 16A) High Feature; reversing starter;
mechanical switching; electronic overload protection;
no fuse protection; to 7.5 KW/400 V; 2.40 A to 16 A.
Options: brake control module, control module; switch
ES; High Feature; programmable power switch
message
X
F-DS1e-x 0.3 - 3 A High
Feature
3RK1 301-0AB13-0AA2 F-DS1e-x 0.3 - 3 A High Feature; safe direct starter;
mechanical switching; electronic overload protection;
no fuse protection; to 1.1 KW/400 V; 0.30 A to 3.00 A.
Options: brake control module, control module; High
Feature; for PM-D F PROFIsafe
X
F-DS1e-x 0.3 - 3 A High
Feature
3RK1 301-0AB13-0AA4 F-DS1e-x 0.3 - 3 A High Feature; safe direct starter;
mechanical switching; electronic overload protection;
no fuse protection; to 1.1 KW/400 V; 0.30 A to 3.00 A.
Options: brake control module, control module; High
Feature; for PM-D F PROFIsafe; programmable
power switch message
X
F-DS1e-x 2.4 - 8 A High
Feature
3RK1 301-0BB13-0AA2 F-DS1e-x 2.4 - 8 A High Feature; safe direct starter;
mechanical switching; electronic overload protection;
no fuse protection; to 3.0 KW/400 V; 2.40 A to 8.00 A.
Options: brake control module, control module; High
Feature; for PM-D F PROFIsafe
X
F-DS1e-x 2.4 - 8 A High
Feature
3RK1 301-0BB13-0AA4 F-DS1e-x 2.4 - 8 A High Feature; safe direct starter;
mechanical switching; electronic overload protection;
no fuse protection; to 3.0 KW/400 V; 2.40 A to 8.00 A.
Options: brake control module, control module; High
Feature; for PM-D F PROFIsafe; programmable
power switch message
X
F-DS1e-x 2.4 - 16 A High
Feature
3RK1 301-0CB13-0AA2 F-DS1e-x 2.4 - 16 A High Feature; safer direct starter
;
mechanical switching; electronic overload protection;
no fuse protection; to 7.5 KW/400 V; 2.40 A to 16 A.
Options: brake control module, control module; High
Feature; for PM-D F PROFIsafe
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Motor Starter
F-Motor starter
Page 15 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
F-DS1e-x 2.4 - 16 A High
Feature
3RK1 301-0CB13-0AA4 F-DS1e-x 2.4 - 16 A High Feature; safe direct starter;
mechanical switching; electronic overload protection;
no fuse protection; to 7.5 KW/400 V; 2.40 A to 16 A.
Options: brake control module, control module; High
Feature; for PM-D F PROFIsafe; programmable
power switch message
X
F-RS1e-x 0.3 - 3 A High
Feature
3RK1 301-0AB13-1AA2 F-RS1e-x 0.3 - 3 A High Feature; safe reversing
starter; mechanical switching; electronic overload
protection; no fuse protection; to 1.1 KW/400 V; 0.30
A to 3.00 A; Option: brake control module, control
module; High Feature; for PM-D F PROFIsafe
X
F-RS1e-x 0.3 - 3 A High
Feature
3RK1 301-0AB13-1AA4 F-RS1e-x 0.3 - 3 A High Feature; safe reversing
starter; mechanical switching; electronic overload
protection; no fuse protection; to 1.1 KW/400 V; 0.30
A to 3.00 A. Options: brake control module, control
module; High Feature; for PM-D F PROFIsafe;
programmable power switch message
X
F-RS1e-x 2.4 - 8 A High
Feature
3RK1 301-0BB13-1AA2 F-RS1e-x 2.4 - 8 A High Feature; safe reversing
starter; mechanical switching; electronic overload
protection; no fuse protection, to 3.0 KW/400 V; 2.40
A to 8.00 A. Options: brake control module, control
module; High Feature; for PM-D F PROFIsafe
X
F-RS1e-x 2.4 - 8 A High
Feature
3RK1 301-0BB13-1AA4 F-RS1e-x 2.4 - 8 A High Feature; safe reversing
starter; mechanical switching; electronic overload
protection; no fuse protection; to 3.0 KW/400 V; 2.40
A to 8.00 A. Options: brake control module, control
module; High Feature; for PM-D F PROFIsafe;
programmable power switch message
X
F-RS1e-x 2.4 - 16 A High
Feature
3RK1 301-0CB13-1AA2 F-RS1e-x 2.4 - 16 A High Feature; safe reversing
starter; mechanical switching; electronic overload
protection; no fuse protection; to 7.5 KW/400 V; 2.40
A to 16 A. Options: brake control module, control
module; High Feature; for PM-D F PROFIsafe
X
F-RS1e-x 2.4 - 16 A High
Feature
3RK1 301-0CB13-1AA4 F-RS1e-x 2.4 - 16 A High Feature; safe reversing
starter; mechanical switching; electronic overload
protection; no fuse protection; to 7.5 KW/400 V; 2.40
A to 16 A. Options: brake control module, control
module; High Feature; for PM-D F PROFIsafe;
programmable power switch message
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
T = Type discontinued: at specified date
F-Motor starter
Page 16 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
xB3 DC24V/4A 3RK1 903-0CE00 xB3 DC24V/4A; brake control module 24 VDC / 4 A,
2DI 24 VDC Local Control
X
xB4 DC500V/0.7A 3RK1 903-0CF00 xB4 DC500V/0.7A; brake control module 500 VC /
0.7A, 2DI 24 VDC Local Control
X
TM-DS65-S32-01
FS L
3RK1 903-0AK00 Terminal module for DS1e-x and DSS1e-x motor
starter, power supply bus, with caps
TM-DS65-S31-01
S
3RK1 903-0AK10 Terminal module for DS1e-x and DSS1e-x motor
starter, looped power supply bus
TM-RS130-S32-01
FS L
3RK1 903-0AL00 Terminal module for RS1e-x motor starter,
power supply bus, with caps
TM-RS130-S31-01
S
3RK1 903-0AL10 Terminal module for RS1e-x motor starter,
with energy bus pass-through
TM-FDS65-S32-01
FS L
3RK1 903-0AC00 Terminal module for fail-safe DS1e-x motor starter,
power supply bus, with caps
TM-FDS65-S32-01
FS L
3RK1 903-3AC00 Terminal module for fail-safe DS1e-x motor starter,
power supply bus, with caps
TM-FDS65-S31-01
S
3RK1 903-0AC10 Terminal module for fail-safe DS1e-x motor starter,
looped power supply bus
TM-FDS65-S31-01
S
3RK1 903-3AC10 Terminal module for fail-safe DS1e-x motor starter,
looped power supply bus
TM-FRS130-S32-01
FS L
3RK1 903-0AD00 Terminal module for fail-safe RS1e-x motor starter,
power supply bus, with caps
TM-FRS130-S32-01
FS L
3RK1 903-3AD00 Terminal module for fail-safe RS1e-x motor starter,
power supply bus, with caps
TM-FRS130-S31-01
S
3RK1 903-0AD10 Terminal module for fail-safe RS1e-x motor starter,
looped power supply bus
TM-FRS130-S31-01
S
3RK1 903-3AD10 Terminal module for fail-safe RS1e-x motor starter,
looped power supply bus
TM-xB215 S24-01 3RK1 903-0AG01 Terminal module for brake control module xB3, xB4
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
TM Motor Starter
Motor Starter Accessories
Page 17 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
ET 200X EM 144 AI 2x U 6ES7 144-1FB31-0XB0 Expansion module AI 2x U (+/-10V), Diagnostics X
ET 200X EM 144 AI2x I 6ES7 144-1GB31-0XB0 Expansion module AI 2x I (+/-20mA, 4-20mA, 4-wire
measuring transducer), Diagnostics
X
ET 200X EM 144 AI 2x I 6ES7 144-1GB41-0XB0 Expansion module AI 2x I (4-20mA, 2-wire measuring
transducer), Diagnostics
X
ET 200X EM 144 AI 2x
RTD
6ES7 144-1JB31-0XB0 Expansion module AI 2x RTD (Pt100), Diagnostics X
ET 200X EM 145 AO 2x
U
6ES7 145-1FB31-0XB0 Expansion module AO 2x U (+/-10V), Diagnostics X
ET 200X EM 145 AO 2x I 6ES7 145-1GB31-0XB0 Expansion module AO 2x I (+/-20mA, 4-20mA),
Diagnostics
X
ET 200X BM 141 DI
8xDC24V
6ES7 141-1BF11-0XB0 ET 200X BM 141 DI 8xDC24V; Basic module ET
200X- DI 8xDC24V, expandable with analog EMs
X X 05/03
ET 200X BM 142 DO
4xDC24V/2A
6ES7 142-1BD21-0XB0 ET 200X BM 142 4DO 24 VDC/2A; basic module ET
200X, 4DO 24 VDC/2A, expandable with analog EMs
X X 11/02
ET 200X EM 141 DI
8xDC24V
6ES7 141-1BF30-0XA0 ET 200X EM 141 DI 8xDC24V; expansion module DI
8xDC24V
X
ET 200X EM 141 DI
8xDC24V
6ES7 141-1BF40-0XA0 ET 200X EM 141 DI 8xDC24V; expansion module ET
200X DI 8xDC24V
X
ET 200X EM 142 DO
4xDC24V/2A
6ES7 142-1BD40-0XB0 ET 200X EM 142 4DO 24 VDC/2A; expansion
module 4DO 24 VDC/2A, diagnostics
X
ET 200X EM 142 DO
8xDC24V/1.3A
6ES7 142-1BF30-0XA0 ET 200X EM 142 8DO 24 VDC/1.3A; expansion
module ET 200X 8DO 24 VDC/1.3A
X
ET 200X PM 148 6ES7 148-1CA00-0XB0 SIMATIC DP, power module PM 148 FOR ET 200X,
4 DO 24 VDC/2A with load voltage supply,
diagnostics by channels
X
ET 200X EM 148-P; DO
16xP/CPV10
6ES7 148-1EH01-0XA0 ET 200X EM 148-P; DO 16xP/CPV10; Expansion
module DO16xP (coupling module for valve block
CPV10)
X
ET 200X EM 148-P; DO
16xP/CPV14
6ES7 148-1EH11-0XA0 ET 200X EM 148-P; DO 16xP/CPV14; Expansion
module DO16xP (coupling module for valve block
CPV14)
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Valve
AO
ET 200
X
BM_DI
BM_DO
DI
AI
DO
PM
Page 18 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
ET 200PRO EM 144
AI 4 x U
6ES7 144-4FF00-0AB0 Analog input module 4 AI U;
±10V, ±5V, 1...5V, 0...10V
X
ET 200PRO EM 144
AI 4 x I
6ES7 144-4GF00-0AB0 Analog input module 4 AI I;
±20mA, 0...20mA, 4...20mA
X
ET 200PRO EM 144
AI 4 x RTD
6ES7 144-4JF00-0AB0 Analog input module 4 AI RTD; X
ET 200PRO EM 145
AO 4 x U
6ES7 145-4FF00-0AB0 Analog output module 4 AO U;
±10V, 1...5V, 0...10V
X
ET 200PRO EM 145
AO 4 x I
6ES7 145-4GF00-0AB0 Analog output module 4 AO I;
±20mA, 0...20mA, 4...20mA
X
ET 200PRO EM 141
DI 8xDC 24V
6ES7 141-4BF00-0AB0 Digital input module 8 DI DC24V; High Feature X
ET 200PRO EM 142
DO 4xDC 24V/2A
6ES7 142-4BD00-0AB0 Digital output module 4 DO DC24V 2A; High Feature X
ET 200PRO EM 148
F-DI 8/16xDC 24V
6ES7 148-4FA00-0AB0 Digital input module DI 8/16xDC24V,
PROFIsafe V2, safety-oriented
X
ET 200PRO EM 148
F-DI 4/8xDC 24V
F-DO 4xDC24V/2A
6ES7 148-4FC00-0AB0 Digital I/O module DI 4/8 / 4DO 24 VDC/2A,
PROFIsafe V2, safety-oriented
X
ET 200PRO
IM154-2 DP HF
6ES7 154-2AA00-0AB0 SIMATIC DP, PROFIBUS DP INTERFACE MODULE
IM154-2 HIGH FEATURE FOR ET 200PRO
INCLUDING TERMINATING MODULE
XX
ET 200PRO
IM154-2 DP HF
6ES7 154-2AA01-0AB0 SIMATIC DP, PROFIBUS DP INTERFACE MODULE
IM154-2 HIGH FEATURE FOR ET 200PRO
INCLUDING TERMINATING MODULE
XX
ET 200PRO
PM-E DC24V
6ES7 148-4CA00-0AA0 PM-E DC24V X
CM IM DP ECOFAST 6ES7 194-4AA00-0AA0 Connection module CM for IM ECOFAST CU DP
CM IM DP Direct 6ES7 194-4AC00-0AA0 Connection module CM for IM DP Direct
CM IM DP M12 / 7/8" 6ES7 194-4AD00-0AA0 Connection module CM for IM DP M12 / 7/8"
CM PM ECOFAST 6ES7 194-4BA00-0AA0 Connection module CM for PM ECOFAST
CM PM Direct 6ES7 194-4BC00-0AA0 Connection module CM for PM direct
CM PM 7/8" 6ES7 194-4BD00-0AA0 Connection module CM for PM 7/8"
CM IO 4 x M12 6ES7 194-4CA00-0AA0 Connection module CM for IO 4xM12
CM IO 8 x M12 6ES7 194-4CB00-0AA0 Connection module CM for IO 8xM12
CM 12×M12 for
4/8 F-DI/4 F-DO
6ES7 194-4DC00-0AA0 Connection module CM for F-DI/DO-EM
4/8 F-DI/4 F-DO DC24V/2A
CM 16×M12 for
8/16 F-DI
6ES7 194-4DD00-0AA0 Connection module CM for F-DI EM
8/16 F-DI DC24V/2A
Diagnostic Repeater 6ES7 972-0AB00-0XA0 Diagnostic repeater for wire diagnostics on the
PROFIBUS DP (RS485), IP20, up to 12 Mbit/s IP20,
up to 12 Mbit/s, DPV0 slave
X X 02/03
Diagnostic Repeater 6ES7 972-0AB01-0XA0 Diagnostic repeater for wire diagnostics on
PROFIBUS-DP (RS485), IP20, up to 12 Mbit/s, DPV1
slave
XX
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
ET 200
p
ro
IM
Re
p
eate
r
Diagnostic Repeater
Connection modules
DO
PM
DI
F-DI
F-DI/DO
AI
AO
Page 19 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
IE OLM 6GK1 102-4AA00 SIMATIC NET, OLM F. INDUSTRIAL ETHERNET,
OPTICAL LINK MODULE WITH 3 ITP- A. 2 FOC
PORTS, REDUNDANT VOLTAGE SUPPLY,
sIGNALING CONTACT
10/05
IE OSM TP22 6GK1 105-2AE00 Industrial Ethernet OSM TP22 Optical Switch Module,
2 FOC ports 100 Mbit/s, 2 RJ45 ports
10/100 Mbit/s and 4 digital inputs; redundant 24 VDC
supply, signaling contact; network management
IE OSM ITP62 6GK1 105-2AA10 SIMATIC NET, OSM TP62 OPTICAL SWITCH
MODULE WITH 2 FOC PORTS 100 MBIT/S U. 6
RJ45-PORTS 10/100 MBIT/S, REDUNDANT 24 VDC
POWER SUPPLY, SIGNALING CONTACT,
INTEGRATED REDUNDANCY MANAGER
IE OSM TP62 6GK1 105-2AB10 SIMATIC NET, OSM ITP62 OPTICAL SWITCH
MODULE with 2 FOC PORTS 100 MBIT/S AND 6
ITP PORTS 10/100 MBIT/S, REDUNDANT 24 VDC
POWER SUPPLY, SIGNALING CONTACT,
INTEGRATED REDUNDANCY MANAGER
IE OSM ITP62-LD 6GK1 105-2AC10 SIMATIC NET, OSM ITP62-LD OPTICAL SWITCH
MODULE WITH 2 FOC PORTS 100 MBIT/S LONG
DISTANCE (FOC up to 18 KM) AND 6 ITP PORTS
10/100 MBIT/S, REDUNDANT 24 VDC POWER
SUPPLY, SIGNALING CONTACT, INTEGRATED
REDUNDANCY MANAGER
IE OSM ITP53 6GK1 105-2AD10 SIMATIC NET, OSM ITP53 OPTICAL SWITCH
MODULE WITH 3 FOC PORTS 100 MBIT/S U. 5 ITP
PORTS 10/100 MBIT/S, REDUNDANT 24 VDC
SUPPLY, SIGNALING CONTACT, INTEGRATED
REDUNDANCY MANAGER
IE ESM ITP80 6GK1 105-3AA10 SIMATIC NET, ESM ITP80 ELECTRICAL SWITCH
MODULE WITH 8 ITP-PORTS 10/100 MBIT/S,
REDUNDANT 24 VDC SUPPLY, SIGNALING
CONTACT, INTEGRATED REDUNDANCY
MANAGER
IE ESM TP80 6GK1 105-3AB10 SIMATIC NET, ESM TP80 ELECTRICAL SWITCH
MODULE WITH 8 RJ45 PORTS 10/100 MBIT/S,
REDUNDANT 24 VDC SUPPLY, SIGNALING
CONTACT, INTEGRATED REDUNDANCY
MANAGER
IE OSM BC08 6GK1 105-4AA00 Industrial Ethernet OSM BC08 Optical Switch Module
,
8 FOC ports 100 Mbit/s and 8 digital inputs; redundan
24 VDC supply, signaling contact; network
management
SCALANCE X414-3E 6GK5 414-3FC00-2AA2 MODULAR INDUSTRIAL ETHERNET SWITCH,
2 X 10/100/1000 MBIT/S AND 12 X 10/100 MBIT/S
RJ45 PORTS,
1 X GIGAGBIT AND 2 X 100 MBIT MEDIA MODULE
SLOTS, EXTENDED INTERFACE,
INTEGRATED REDUNDANCY MANAGER,
OFFICE FEATURES (RSTP, VLAN,..)
NETWORK MANAGEMENT,
C-PLUG IN SCOPE OF DELIVERY
SCALANCE X408-2 6GK5 408-2FD00-2AA2 MODULAR INDUSTRIAL ETHERNET SWITCH,
4 X 10/100/1000 MBIT/S AND
4 X 10/100 MBIT/S RJ45 PORTS,
2 X GIGAGBIT/FAST ETHERNET
MEDIA MODULE SLOTS,
INTEGRATED REDUNDANCY MANAGER,
OFFICE FEATURES (RSTP, VLAN,..)
NETWORK MANAGEMENT,
C-PLUG IN SCOPE OF DELIVERY
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Network Com
p
onents
Ethernet
Page 20 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
Media module
MM491-2
6GK5 491-2AB00-8AA2 100Base-FX Ethernet media module for
SCALENCE X414-3E
Media module
MM492-2
6GK5 492-2AL00-8AA2 1000Base-SX Ethernet media module for
SCALENCE X414-3E
Extender module
EM495-8
6GK5 495-8BA00-8AA2 Extender module EM495-8
with 8 x 10/100 Mbit/s TP Ports
Extender module
EM496-4
6GK5 496-4MA00-8AA2 Extender module EM496-4 with 4 slots for 100 Mbit/s
media modules
IE Media converter
SCALANCE X101-1
6GK5 101-1BB00-2AA3 Industrial Ethernet media converter SCALANCE X101
1
for converting RJ45 TP to Multimode FOC (BFOC)
with 100 Mbit/s; 1 x 10/100 Mbit/s RJ45 port and 1 x
100 Mbit/s Multimode BFOC;
redundant 24 VDC supply, signaling contact
IE Media converter
SCALANCE X101-1LD
6GK5 101-1BC00-2AA3 Industrial Ethernet Media converter SCALANCE X101
1LD
for converting RJ45 TP to Single mode FOC (BFOC)
with 100 Mbit/s; 1 x 10/100 Mbit/s RJ45 port und 1 x
100 Mbit/s Single mode BFOC;
redundant 24 VDC supply and signaling contact
SCALANCE X208 6GK5 208-0BA00-2AA3 Managed Industrial Ethernet Switch with 8 RJ45 Port
s
10/100 MBit/s for the set up of the Industrial Ethernet
line- star-, or ring topologies
SCALANCE X204-2 6GK5 204-2BB03-2AA3 Managed Industrial Ethernet Switch with 4 RJ45 Port
s
10/100 MBit/s and 2 BFOC Ports for the set up of the
Industrial Ethernet line- star-, or ring topologies
SCALANCE X204
IRT
6GK5 204-0BA00-2BA3 Managed Industrial Ethernet IRT Switch with 4 x RJ4
5
ports 10/100 MBit/s for the set up of the Industrial
Ethernet line- star-, or ring topologies
SCALANCE X202-2
IRT
6GK5202-2BB00-2BA3 Managed Industrial Ethernet Switch with 2 x RJ45
ports 10/100 MBit/s and two BFOC ports for the set
up of the Industrial Ethernet line- star-, or ring
topologies
SCALANCE X206-1LD 6GK5206-1BC10-2AA3 Managed Industrial Ethernet Switch, 6 X 10/100
Mbit/s RJ45 ports 1 X 100 Mbit/s Single mode BFOC
SCALANCE X212-2 6GK5212-2BB00-2AA3 SCALANCE X212-2, Managed Industrial Ethernet
Switch, 12 X 10/100 Mbit/s RJ45 ports 2 X 100 Mbit/s
Multimode BFOC
SCALANCE X212-2LD 6GK5212-2BC00-2AA3 SCALANCE X212-2LD, Managed Industrial Ethernet
Switch, 12 X 10/100 MBIT/S RJ45 ports 2 X 100
MBIT/S Single mode BFOC
SCALANCE X216 6GK5216-0BA00-2AA3 Managed Industrial Ethernet Switch, 16 X 10/100
Mbit/s RJ45 ports
SCALANCE X224 6GK5224-0BA00-2AA3 Managed Industrial Ethernet Switch, 24 X 10/100
MBIT/S RJ45 ports
SCALANCE X202-2P
IRT
6GK5 202-2BH00-2BA3 SCALANCE X202-2P IRT
2 x 10/100 Mbit/s RJ45 ports,
2 x 100 Mbit/s POF/PCF SC RJ ports
SCALANCE X201-3P
IRT
6GK5 201-3BH00-2BA3 SCALANCE X201-3P IRT
1 x 10/100 Mbit/s RJ45 port,
3 x 100 Mbit/s POF/PCF SC RJ ports
SCALANCE X200-4P
IRT
6GK5 200-4AH00-2BA3 SCALANCE X200-4P IRT
4 x 100 Mbit/s POF/PCF SC RJ ports
SCALANCE X308-2 6GK5308-2FL00-2AA3 Managed Plus Industrial Ethernet Switch, 2 X 1000
Mbit/s MM SC 1 X 10/100/1000 Mbit/s and 7 X 10/10
0
Mbit/s RJ45 ports
SCALANCE X308-2LD 6GK5308-2FM00-2AA3 Managed Plus Industrial Ethernet Switch, 2 X 1000
Mbit/s SM SC 1 X 10/100/1000 Mbit/s and 7 X 10/100
Mbit/s RJ45 ports
SCALANCE X310 6GK5310-0FA00-2AA3 Managed Plus Industrial Ethernet Switch, 3 X
10/100/1000 Mbit/s and 7 X 10/100 Mbit/s RJ45 ports
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Ethernet
Page 21 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
SCALANCE W788-
1PRO
6GK5 788-1ST00-2AA6 SCALANCE W788-1PRO
Industrial WLAN ACCESS POINT
SCALANCE W788-
2PRO
6GK5788-2ST00-2AA6 SCALANCE W788-2PRO
Industrial WLAN DUAL ACCESS POINT
SCALANCE W746-
1PRO
6GK5 746-1ST00-2AA6 SCALANCE W746-1 PRO
Industrial WLAN CLIENT MODULE
SCALANCE W744-
1PRO
6GK5 744-1ST00-2AA6 SCALANCE W744-1 PRO
Industrial WLAN CLIENT MODULE
SCALANCE S602 6GK5 602-0BA00-2AA3 SCALANCE S602 Industrial Security Module, access
security by means of Stateful Inspection Firewall
SCALANCE S612 6GK5 612-0BA00-2AA3 SCALANCE S612 Industrial Security Module, access
security by means of Stateful Inspection Firewall for
up to 32 devices per VPN tunnel (simultaneously up
to 64 VPN tunnels)
SCALANCE S613 6GK5 613-0BA00-2AA3 SCALANCE S613 Industrial Security Module, access
security by means of Stateful Inspection Firewall for
up to 64 devices per VPN tunnel (simultaneously up
to 128 VPN tunnels); suitable for extended
temperature range from -20 °C to +70° C
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Ethernet
Page 22 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
CPU 416-2 PCI 6ES7 616-2QL00-0AB4 V3.4 CPU 416-2 PCI as expansion card for PCs; supports
constant bus cycle time and isochronous mode;
routing; firmware V3.4
X
CPU 416-2 PCI 6ES7 616-2QL10-0AB4 V4.0 CPU 416-2 PCI as expansion card for PCs; supports
constant bus cycle time and isochronous mode;
routing; firmware V4.0
X
CP 1613 6GK1 161-3AA00 SIMATIC NET CP 1613 Industrial Ethernet, ISO,
TCP/IP, S7 Connections, PG functions,
PCI-Bus
CP 1613 A2 6GK1 161-3AA01 SIMATIC NET CP 1613 Industrial Ethernet, ISO,
TCP/IP, S7 Connections, PG functions,
PCI bus
CP 1623 6GK1 162-3AA00 SIMATIC NET CP 1613 Industrial Ethernet, ISO,
TCP/IP, S7 Connections, PG functions,
PCI Express bus
CP 1512 6GK1 151-2AA00 CP 1512; SIMATIC NET CP1512 Industrial Ethernet,
ISO, TCP/IP, S7 Connections, PG functions,
PCMCIA, only for use with PCS7 ES !
CP 1612 6GK1 161-2AA00 CP 1612; SIMATIC NET CP 1612 Industrial Ethernet,
ISO, TCP/IP, S7 Connections, PG functions, PCI-Bus
Server adapter network
card
PCI
A5E01605513 Server adapter network card for BCE, replacement
part for redundant terminal bus INTEL PCI network
adapter for Industrial Ethernet (10/100/1000 Mbit/s),
with RJ45 connector
Desktop adapter network
card
PCI
A5E00718412 Desktop adapter network card for BCE, replacement
part for redundant terminal bus INTEL PCI network
adapter for Industrial Ethernet (10/100/1000 Mbit/s),
with RJ45 connector
Server adapter network
card
PCI Express
A5E01579487 Server adapter network card for BCE, replacement
part for redundant terminal bus INTEL PCI Express
network adapter for Industrial Ethernet (10/100/1000
Mbit/s), with RJ45 connector
Desktop adapter network
card
PCI Express
A5E01579552 Desktop adapter network card for BCE, replacement
part for redundant terminal bus INTEL PCI Express
network adapter for Industrial Ethernet (10/100/1000
Mbit/s), with RJ45 connector
CP 5611 6GK1 561-1AA00 SIMATIC NET CP 5611 PROFIBUS, PCI bus, only fo
r
use with SIMATIC PDM!
X 07/05
CP 5611 A2 6GK1 561-1AA01 SIMATIC NET CP 5611 A2 PROFIBUS, PCI Bus
V2.2,
only for use with SIMATIC PDM!
X
CP 5613 6GK1 561-3AA00 SIMATIC NET CP 5613 PROFIBUS, PCI Bus,
DP master for DP-V0 /-V1
X 01/06
CP 5613 A2 6GK1 561-3AA01 SIMATIC NET CP 5613 A2 PROFIBUS, PCI Bus
V2.2, DP master for DP-V0 /-V1
X
CP 7515 6GK1 751-5AA00 SIMATIC NET CP 7515 Industrial WLAN
PCMCIA
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
PC
CP - IWLAN
Controller
CP Ethernet
CP-Profibus
Page 23 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
2XV9 450-1AR13 WinGPS for Windows 95/NT, GPS receiver for world-
wide time synchronization, incl. mounting kit
2XV9 450-1AR14 DCFRS for Windows 95/NT, DCF 77 receiver for time
synchronization within Europe, incl. mounting kit
2XV9 450-1AR24 SICLOCK TM time transmitter, complete package
GPS, 24 VDC to 110 VDC, for synchronizing nodes
on Industrial Ethernet
2XV9 450-1AR25 SICLOCK TM time transmitter, complete GPS
package GPS, 90V DC/AC to 240 VDC/AC, for
synchronizing nodes on Industrial Ethernet
2XV9 450-1AR26 SICLOCK TM time transmitter, complete package
DCF77, 24 VDC to 110 VDC, for synchronizing node
s
on Industrial Ethernet
2XV9 450-1AR27 SICLOCK TM time transmitter, DCF77, 90VAC/DC to
240 VDC/AC, for synchronizing nodes on Industrial
Ethernet
3P7217B00APF01 MicroLaser 170, high-speed laser printer
(monochrome) with Centronics interface and optional
network adapter, 12 MB RAM
3P74C4B00APQ01 MicroLaser C4, high-resolution color laser printer, wit
h
network capability, 24 MB RAM, with network
adapter
GNC:
6DS1 916-8RR Signal module, PCI card for installation in OS or ES
stations (horn)
6DS1 916-8AA Signal module, ISA card for installation in OS or ES
stations (horn)
6ES7 652-0XX01-1XC0 External chip card reader, V.24 interface, PS/2 power
supply module with 1.8 m cable, operating
instructions, software for User Administrator and
process control; required for all OS stations
6ES7652-0XX02-1XC0 Smart card reader V2.0, desktop version, USB port
6ES7 652-0XX02-1XE0 G200 MMS Multi-VGA graphic adapter "2 screens" 10/04
6ES7 652-0XX02-1XE1 G200 MMS Multi-VGA graphic adapter "4 screens" 10/04
6ES7 652-0XX03-1XE0 G450 MMS Multi-VGA graphic adapter "2 screens"
6ES7 652-0XX03-1XE1 G450 MMS Multi-VGA graphic adapter "4 screens"
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Partner Modules
PCS 7
Page 24 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
CP341-1A 6ES7 341-1AH01-0AE0 CP341 RS232, communication processor, RS232
port, reloadable drivers
X M 12/08
CP341-1A 6ES7 341-1AH02-0AE0 CP341 RS232, communication processor, RS232
port, reloadable drivers. Now with 4 Kbyte message
frame length, 115 Kbaud data rate and printer driver
XM
CP341-1B 6ES7 341-1BH01-0AE0 CP341 TTY, communication processor TTY interface,
reloadable drivers
X M 12/08
CP341-1B 6ES7 341-1BH02-0AE0 CP341 TTY, communication processor TTY interface,
reloadable drivers. Now with 4 Kbyte message frame
length, 115 Kbaud data rate and printer driver
XM
CP341-1C 6ES7 341-1CH01-0AE0 CP341 RS422, com. processor, RS422 port,
reloadable drivers
X M 12/08
CP341-1C 6ES7 341-1CH02-0AE0 CP341 RS422, com. processor, RS422 port,
reloadable drivers. Now with 4 Kbyte message frame
length, 115 Kbaud data rate and printer driver
XM
CP342-2 AS-I 6GK7 342-2AH00-0XA0 1) SIMATIC NET CP 342-2, for connecting an S7-300 to
an AS interface
M 07/00
CP342-2 AS-I 6GK7 342-2AH01-0XA0 1) SIMATIC NET CP 342-2, for connecting an S7-300 to
an AS interface
M
CP343-2 AS-i 6GK7 343-2AH00-0XA0 1) Basic module for connecting an AS interface.
Supports AS-i A/B slaves and AS-i 7.3/7.4 analog
slaves
M
FM350-1 COUNTER 6ES7 350-1AH03-0AE0 V1.0.2 Counter module, single-channel, also for configuratio
n
with active bus modules, supports isochronous mode
XM
FM350-2 COUNTER 6ES7 350-2AH00-0AE0 Counter module, 8 channels X M 10/08
FM350-2 COUNTER 6ES7 350-2AH01-0AE0 Counter module, 8 channels X M
FM355 C PID Control 6ES7 355-0VH10-0AE0 Control module, 4 channels (continuous count)
4AI+8DI+4AO, V2.0
XM
FM355 S PID Control 6ES7 355-1VH10-0AE0 Control module, 4 channels (step and pulse mode)
4AI+8DI+8DO, V2.0
XM
FM355-2 C 6ES7 355-2CH00-0AE0 FM355-2 C; control module, 4 channels, temperature
controller
XM
FM355-2 S 6ES7 355-2SH00-0AE0 FM355-2 S; control module, 4 channels, temperature
controller
XM
PS307 2A 6ES7 307-1BA00-0AA0 Load power supply 120/230 VAC:24 VDC/2 A
PS307 2A 6ES7 305-1BA80-0AA0 Load power supply 120/230 VAC:24 VDC/2 A
PS307 5A 6ES7 307-1EA00-0AA0 Load power supply 120/230 VAC:24 VDC/5 A
PS307 5A 6ES7 307-1EA80-0AA0 Load power supply 120/230 VAC:24 VDC/5 A
PS307 10 A 6ES7 307-1KA00-0AA0 Load power supply 120/230 VAC:24 VDC/10 A 04/03
PS307 10 A 6ES7 307-1KA01-0AA0 Load power supply 120/230 VAC:24 VDC/10 A
1) Automatic integration in PCS 7 only by means of the "Programming instructions for driver blocks V6.0".
New AS-i modules can be used as substitution module in PCS7.
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
CP - PtP
CP-AS-i
FM
PS
S7-300
Page 25 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
SM 321 DI 16x24VDC 6ES7 321-1BH01-0AA0 Digital input module DI 16x24VDC, rooting in groups
of 16
X M 10/04
SM 321 DI 16x24VDC 6ES7 321-1BH02-0AA0 Digital input module DI 16x24VDC, rooting in groups
of 16
XMM
SM321
DI 16xDC24V
6ES7 321-1BH10-0AA0 Digital input module DI 16xDC24V, rooting in groups
of 16, High Speed, supports isochronous mode
XM
SM321 DI16x24VDC 6ES7 321-1BH50-0AA0 Digital input module DI 16x24VDC, rooting in groups
of 16, M-reading
XM
SM321 DI 16xDC24V 6ES7 321-1BH81-0AA0 SM321; Digital input module DI 16xDC24V, extended
environmental conditions
X M 10/00
SM 321 DI 16x24VDC 6ES7 321-1BH82-0AA0 SM321; Digital input module DI 16x24VDC, extended
environmental conditions
X M 11/03
SM321 DI32x24VDC 6ES7 321-1BL00-0AA0 Digital input module DI 32x24VDC, rooting in groups
of 32
XMM
SM321
DI 32xDC24V
6ES7 321-1BL80-0AA0 Digital input module DI 32xDC24V, rooting in groups
of 32
X M 11/03
SM321
DI 64xDC24V
6ES7 321-1BP00-0AA0 SM321; digital input module DI 64xDC24V,
rooting in groups of 16, P- or M-reading
XM
SM321
DI 16xAC/DC24..48V
6ES7 321-1CH00-0AA0 Digital input module DI 16xAC/DC24..48V,
rooting in groups of 1
XM
SM321
DI 16xDC48..120V
6ES7 321-1CH20-0AA0 Digital input module DI 16xDC48..120V,
rooting in groups of 8
XM
SM321
DI 16xDC48..120V
6ES7 321-1CH80-0AA0 Digital input module DI 16xDC48..120V,
rooting in groups of 8, environmental conditions
X M 11/03
SM321
DI 16xAC120V
6ES7 321-1EH01-0AA0 Digital input module DI 16x120VAC, rooting in groups
of 4
X M 09/01
SM321
DI 32xAC120V
6ES7 321-1EL00-0AA0 DI 32xAC 120V, 32Pt 120VAC Input - IEC Type II - 8
Pts/Comm
XM
SM321 DI8x230VAC 6ES7 321-1FF01-0AA0 Digital input module DI 8x120...230VAC, rooting in
groups of 2
XMM
SM 321 DI
8xAC120/230V
6ES7 321-1FF10-0AA0 Digital input module DI8xAC ISO, single-channel
rooting SM 321 DI 8xAC120/230V
XM
SM 321 DI
8x120/230VAC
6ES7 321-1FF81-0AA0 Digital input module DI 8x120/230VAC, extended
environmental conditions
X M 11/03
SM321
DI16x120V/230VAC
6ES7 321-1FH00-0AA0 SM321 DI16x120/230VAC; digital input module DI
16xAC120V /230V, rooting in groups of 4
XM
SM321 DI 16x24VDC,
Interrupt
6ES7 321-7BH00-0AB0 Digital input module DI 16xDC24V, with hardware an
d
diagnostic interrupt, rooting in groups of 16
XOM
SM321
DI 16xDC24V, Alarm
6ES7 321-7BH01-0AB0 Digital input module DI 16xDC24V, with hardware an
d
diagnostic interrupt, rooting in groups of 16, supports
isochronous mode
XOG
SM 321 DI 16x24VDC,
Interrupt
6ES7 321-7BH80-0AB0 Digital input module DI 16x24VDC, with hardware an
d
diagnostic interrupt, rooting in groups of 16, extended
environmental conditions
XO
SM321 DI4xNAMUR, Ex 6ES7 321-7RD00-0AB0 Digital input module DI 4xNamur, with hardware and
diagnostic interrupt, single-channel rooting, [EEx ib]
XOC
SM 321, DI 16xNAMUR 6ES7 321-7TH00-0AB0 Digital input module DI 16xNAMUR,with diagnostics
function and quality code
XOC
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; G = group-specific; C = channel-specific
(Please refer to the System Manual "SIMATIC Fault-tolerant Systems S7-400H")
T = Type discontinued: at specified date
SM - DI
Page 26 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
SM322
DO8x24VDC/2A
6ES7 322-1BF01-0AA0 Digital output module 8DO 24 VDC/2 A, rooting in
groups of 4
XMM
SM322
DO16x24VDC/0.5A
6ES7 322-1BH01-0AA0 Digital output module 16DO 24 VDC/0.5 A, rooting in
groups of 8
XM
SM322
DO 16xDC24V/0.5A
6ES7 322-1BH10-0AA0 Digital output module 16DO 24 VDC/0.5 A, rooting in
groups of 8,
High Speed, supports isochronous mode
XM
SM 322 DO
16x24VDC/0.5A
6ES7 322-1BH81-0AA0 Digital output module 16DO 24 VDC/0.5 A, extended
environmental conditions
X M 11/03
SM322
DO32x24VDC/0.5A
6ES7 322-1BL00-0AA0 Digital output module 32DO 24 VDC/0.5 A, rooting in
groups of 8
XMM
SM322
DO 64xDC24V/0.3A
6ES7 322-1BP00-0AA0 Digital output module DO 64xDC24V/0.3A, rooting in
groups of 16, P-switching
XM
SM322
DO 64xDC24V/0.3A
6ES7 322-1BP50-0AA0 Digital output module DO 64xDC24V/0.3A, rooting in
groups of 16, M-switching
XM
SM322
DO 8xDC48..120V/1.5A
6ES7 322-1CF00-0AA0 Digital output module 8DO 48..120 VDC/1.5 A,
rooting in groups of 4
XM
SM322
DO8x48..120VDC/1.5A
6ES7 322-1CF80-0AA0 Digital output module 8DO 48..120 VDC/1.5 A,
rooting in groups of 4, extended environmental
conditions
X M 11/03
SM322
DO16x120VAC/0.5A
6ES7 322-1EH01-0AA0 Digital output module DO 16x120VAC/0.5A, rooting i
n
groups of 8
X M 01/02
SM322
DO 32xAC120V/1A
6ES7 322-1EL00-0AA0 Digital output module 32DO 120V AC/1 A, rooting in
groups of 8
X M 10/04
SM322 DO8x230VAC/2A 6ES7 322-1FF01-0AA0 Digital output module 8DO 120...230VAC/1 A, rooting
in groups of 4, Si.
XMM
SM 322 DO
8x120/230VAC/1A
6ES7 322-1FF81-0AA0 Digital output module 8DO 120/230 VAC/1 A,
extended environmental conditions
X M 10/03
SM322
DO16x120V/230VAC/0.5
A
6ES7 322-1FH00-0AA0 Digital output module 16DO 120/230 VAC/0.5 A,
rooting in groups of 8
XM
SM322
DO 32xAC120V/230V/1A
6ES7 322-1FL00-0AA0 Digital output module 32DO 120-230V AC/1 A,
rooting in groups of 8
XM
SM322 DO8xRel.
230VAC
6ES7 322-1HF01-0AA0 Digital output module DO 8xREL 24 VDC/2 A, 230V
AC/2 A, rooting in groups of 2
XM
SM 322 DO 8xRel.
230VAC/5A
6ES7 322-1HF10-0AA0 Digital output module DO 8xREL 230 VAC, 5 A,
single-channel rooting
XM
SM322
DO 8xRel. AC 24V/5A
6ES7 322-1HF20-0AA0 Digital output module DO 8xREL 24 VDC/5 A, 230
VAC/5 A, single-channel rooting, with overvoltage
protection element
X M 07/02
SM322
DO 8xRel. 230VAC /5A
6ES7 322-1HF80-0AA0 SM 322 DO 8xRel. AC 230V/5A; Digital output
module DO 8xREL. 230V AC, 5A, single-channel
rooting, extended environmental conditions
X M 11/03
SM322 DO16xRel.
120VAC
6ES7 322-1HH00-0AA0 Digital output module DO 16xREL 24 VDC/2 A,
120V/2 A, rooting in groups of 16
X M 07/02
SM322 DO16xRel.
120/230VAC
6ES7 322-1HH01-0AA0 Digital output module DO 16xREL 24 VDC/2 A,
120V/2 A, 230 V/?A, rooting in groups of 16
XM
SM322
DO 8xAC120/230V/2A
6ES7 322-5FF00-0AB0 SM322; Digital output module DO DO8xAC120/230V,
with value substitution
XO
SM322
DO 16xUC24/48V
6ES7 322-5GH00-0AB0 Digital output module DO 16xUC24/48V
diagnostic interrupt, single-channel rooting,
XM
SM322
DO 8xRel AC230V
6ES7 322-5HF00-0AB0 Digital output module DO 8xAC230V, x A X O
SM322
DO 4xDC15V/20mA, Ex
6ES7 322-5RD00-0AB0 Digital output module DO 4xDC15V/20mA, diagnostic
interrupt, single-channel rooting, [EEx ib]
XO
SM322 DO
4x24VDC/10mA, Ex
6ES7 322-5SD00-0AB0 Digital output module 4DO 24 VDC/10 mA, diagnosti
c
interrupt, single-channel rooting, [EEx ib]
XOC
SM322
DO8x24VDC/0.5A
6ES7 322-8BF00-0AB0 Digital output module 8DO 24 VDC/0.5 A, diagnostic
interrupt, rooting in groups of 8
XOM
SM 322 DO
8x24VDC/0.5A
6ES7 322-8BF80-0AB0 Digital output module 8DO 24 VDC/0.5 A, with
diagnostics function, extended environmental
conditions
X O 11/03
SM 322, DO
16x24VDC/0.5A
6ES7 322-8BH00-0AB0 Digital output module, 16DO 24 VDC/0.5 A, with
diagnostics function
X O M 12/03
SM322
DO 16xDC24V/0.5A
6ES7 322-8BH01-0AB0 Digital output module, 16DO 24 VDC/0.5 A, with
diagnostics function
XOM
SM322
DO 16xDC24V/0.5A
6ES7 322-8BH10-0AB0 Digital output module, 16DO 24 VDC/0.5 A, with
diagnostics function
XOM
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; G = group-specific; C = channel-specific
(Please refer to the System Manual "SIMATIC Fault-tolerant Systems S7-400H")
T = Type discontinued: at specified date
SM - DO
Page 27 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
SM323
DI 8/DO 8 x DC24V/0.5A
6ES7 323-1BH01-0AA0 SM 323 DI 8/8DO 24 VDC/0.5A; digital I/O module
8DI /8DO 24 VDC/0.5A,
XM
SM323
DI 8/DO 8 x DC24V/0.5A
6ES7 323-1BH81-0AA0 SM 323 DI 8/8DO 24 VDC/0.5A; digital I/O module,
8DI/8DO 24 VDC/0.5A, outdoor
X M 11/03
SM 326, DI 24x24VDC 6ES7 326-1BK00-0AB0 SM 326 F, 24DI 24 VDC, safety-oriented X OS C 04/06
SM326
DI 24xDC24V
6ES7 326-1BK01-0AB0 SM 326 F, 24DI 24 VDC,
safety oriented, with diagnostic interrupt
X OS C 09/09
SM326
DI 24xDC24V
6ES7 326-1BK02-0AB0 SM 326 F, 24DI 24 VDC,
safety oriented, with diagnostic interrupt
XOSC
SM 326, DI 8xNAMUR,
Ex(i)
6ES7 326-1RF00-0AB0 SM 326 F, 8DI NAMUR, Ex(i), safety-oriented X OS C
SM 326, DO
10x24VDC/2A
6ES7 326-2BF00-0AB0 SM326 F, 10DO 24 VDC/2 A, safety oriented X OS C 04/03
SM326
DO 10xDC24V/2A
6ES7 326-2BF01-0AB0 SM 326F, 10DO 24 VDC/2A, P switching, safety-
oriented, with diagnostic interrupt
XOSC
SM326
DO 10xDC24V/2A
6ES7 326-2BF10-0AB0 SM 326F, 10DO 24 VDC/2A, P switching, safety-
oriented, with diagnostic interrupt, Profibus DP and
PROFInet with PROFIsafe V2
XOSC
SM 326F
DO 8xDC24V/2A
6ES7 326-2BF40-0AB0 SM 326F, 8DO 24 VDC/2A, P-M switching, safety-
oriented, with diagnostic interrupt
X 09/09
SM 326F
DO 8xDC24V/2A
6ES7 326-2BF41-0AB0 SM 326F, 8DO 24 VDC/2A, P-M switching, safety-
oriented, with diagnostic interrupt
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
OS = In standard mode only
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; G = group-specific; C = channel-specific
(Please refer to the System Manual "SIMATIC Fault-tolerant Systems S7-400H")
T = Type discontinued: at specified date
SM - DI - F
SM - DI/DO
SM - DO - F
Page 28 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
SM 331 AI 8x13 bits 6ES7 331-1KF00-0AB0 Analog input module AI 8x13 bits X O 10/03
SM331
AI 8x13Bit
6ES7 331-1KF01-0AB0 Analog input module AI 8x13 bits X O
SM331
AI 8x14Bit
6ES7 331-7HF01-0AB0 Analog input module AI 8x14 bits,
high-speed module, supports isochronous mode
XO
SM331 AI2x12 bits 6ES7 331-7KB01-0AB0 Analog input module AI 2x12...14 bits X O 10/04
SM331 AI2x12 bits 6ES7 331-7KB02-0AB0 Analog input module AI 2x12...14 bits X O
SM 331 AI 2x12 bits 6ES7 331-7KB81-0AB0 Analog input module AI 2x12...14 bits, extended
environmental conditions
X O 05/01
SM331 AI2x12 bits 6ES7 331-7KB82-0AB0 Analog input module AI 2x12...14 bits, Outdoor X O 11/03
SM331 AI8x12 bits 6ES7 331-7KF01-0AB0 Analog input module AI 8x12...14 bits X O 02/05
SM331 AI8x12 bits 6ES7 331-7KF02-0AB0 Analog input module AI 8x12...14 bits X O M
SM331 AI8x16 bits 6ES7 331-7NF00-0AB0 Analog input module; AI8x16 bits; 1 V to 5 V, +/- 5 V,
+/- 10 V; 0..20 mA, 4..20 mA, +/- 20 mA
XOC
SM331 AI8x16 bits 6ES7 331-7NF10-0AB0 SM331 AI8x16Bit; Analog input module; AI8x16 bits;
1 V to 5 V, +/- 5 V, +/- 10 V; 0..20 mA, 4..20 mA, +/-
20 mA
XOC
SM331
AI 6xTC
6ES7 331-7PE10-0AB0
A
nalog input module AI6xTC, 16 bits, ISO, suitable fo
r
channel-selective redundancy
XOC
SM331 AI8xRTD 6ES7 331-7PF00-0AB0 Analog input module AI8xRTD, 16 bits (internal 24
bits according to the Sigma-Delta process); RTD:
Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000,
Cu10
X O 04/05
SM331
AI 8xRTD
6ES7 331-7PF01-0AB0 Analog input module. AI8xRTD, 16 bits (internal. 24
bits according to the Sigma-Delta process); RTD:
Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000,
Cu10
XO
SM331 AI8xTC 6ES7 331-7PF10-0AB0 Analog input module AI8xTC, 16 bits (internal 24 bits
according to the Sigma-Delta process);
thermocouples: B, E, J, K, L, N, R, S, T
X O 07/05
SM331
AI 8xTC
6ES7 331-7PF11-0AB0 Analog input module. AI8xTC, 16 bits (internal 24 bits
according to the Sigma-Delta process);
thermocouples: B, E, J, K, L, N, R, S, T
XO
SM331 AI4x0/4...20mA,
Ex
6ES7 331-7RD00-0AB0 Analog input module AI 4x0/4...20mA, 15 bits, [EEx
ib]
XOC
SM331 AI8xTC/4xRTD,
Ex
6ES7 331-7SF00-0AB0 Analog input module AI 8xTC/4xRTD, 15 bits, [EEx ib] X O
SM 331 AI2x0/4...20mA
HART, EX
6ES7 331-7TB00-0AB0 Analog input module AI2x0/4...20mA, with HART
communication, [EEx ib]
XO
SM 331
AI8x0/4...20mA HART
6ES7 331-7TF00-0AB0 Analog input module AI8x0/4...20mA, +/-20mA
with HART communication
XO
SM331
AI 8x0/4...20mA HART,
6ES7 331-7TF01-0AB0 Analog input module AI8x0/4...20mA,+/-20mA
with HART communication
XOC
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
OS = In standard mode only
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; G = group-specific; C = channel-specific
(Please refer to the System Manual "SIMATIC Fault-tolerant Systems S7-400H")
T = Type discontinued: at specified date
SM - AI
Page 29 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
SM332 AO2x12 bits 6ES7 332-5HB01-0AB0 Analog output module AO 2x12 bits X O
SM 332 AO 2x12 bits 6ES7 332-5HB81-0AB0 Analog output module AO 2x12...14 bits, extended
environmental conditions
X O 11/03
SM332 AO4x12 bits 6ES7 332-5HD01-0AB0 Analog output module AO 4x11...12 bits X O C
SM332
AO 8x12Bit
6ES7 332-5HF00-0AB0 XOC
SM332 AO4x0/4...20mA,
Ex
6ES7 332-5RD00-0AB0
A
nalog output module AO 4x0/4...20mA, 15 bits, [EE
x
ib]
XOC
SM 332, AO2x0/4...20mA
HART, EX
6ES7 332-5TB00-0AB0 Analog output module AO2x0/4...20mA, with HART
communication, [EEx ib]
XO
SM332 6ES7 332-7ND00-0AB0 SM332, analog output module; 4x16 bits X O 10/04
SM332
AO 4x16 bits
6ES7 332-7ND01-0AB0 SM332, analog output module; 4x16 bits
supports isochronous mode
X O 01/05
SM332
AO 4x16 bits
6ES7 332-7ND02-0AB0 SM332, analog output module; 4x16 bits
supports isochronous mode
XO
SM332
AO 8x0/4...20mA HART
6ES7 332-8TF00-0AB0 Analog output module 8x16Bit, 0/4..20mA,
with HART communication
XO
SM332
AO 8x0/4...20mA HART
6ES7 332-8TF01-0AB0 Analog output module 8x16Bit, 0/4..20mA,
with HART communication
XOC
SM 336, AI 6x13 bits 6ES7 336-1HE00-0AB0 Analog input module AI 6x13 bits, safety-oriented up
to SIL-3, with diagnostics function
XOSC
SM336
AI 6 HART
6ES7 336-4GE00-0AB0 Analog input module AI 6x0/4...20mA HART,
PROFIsafe V2, safety-oriented, with diagnostics
interrupt, with HART communication, FW update,
redundancy
XOSC
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
OS = In standard mode only
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; G = group-specific; C = channel-specific
(Please refer to the System Manual "SIMATIC Fault-tolerant Systems S7-400H")
T = Type discontinued: at specified date
SM - AO
SM - AI - F
Page 30 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
MTA 16 channels DI
Standard
6ES7650-1AC10-3XX0 MTA 16 channels DI; 24 VDC
for 6ES7321-7BH01-0AB0 (as of E version 02)
MTA 16 channels DI
Standard
6ES7650-1AC11-3XX0 MTA 16 channels DI; 24 VDC
for 6ES7321-7BH01-0AB0 (as of E version 2)
MTA 8 channels AI
Standard
6ES7650-1AA50-2XX0 MTA 8 channels AI; 1-5 V / 0/4-20 mA;
for 6ES7331-7NF00-0AB0 (as of E version 05)
MTA 8 channels AI
Standard
6ES7650-1AA51-2XX0 MTA 8 channels AI; 1-5 V / 0/4-20 mA;
for 6ES7331-7NF00-0AB0 (as of E version 5)
MTA 8 channels
AI HART
Standard
6ES7650-1AA61-2XX0 MTA 8 channels AI; 0/4-20 mA;
for 6ES7 331-7TF01-0AB0
MTA 8 channels AO
Standard
6ES7650-1AB50-2XX0 MTA 8 channels AO; 4-20 mA;
for 6ES7332-5HF00-0AB0 (as of E version 03)
MTA 8 channels AO
Standard
6ES7650-1AB51-2XX0 MTA 8 channels AO; 4-20 mA;
for 6ES7332-5HF00-0AB0 (as of E version 3)
MTA 8 channels
AO HART
Standard
6ES7650-1AB61-2XX0 MTA 8 channels AO; 0/4-20 mA;
for 6ES7332-8TF01-0AB0
MTA 8 channels TC
Standard
6ES7650-1AF50-2XX0 MTA 8 channels TC;
for 6ES7331-7PF10-0AB0 (as of E version 04)
and 6ES7 331-7PF11-0AB0
MTA 8 channels TC
Standard
6ES7650-1AF51-2XX0 MTA 8 channels TC;
for 6ES7331-7PF10-0AB0 (as of E version 4)
and 6ES7 331-7PF11-0AB0
MTA 8 channels RTD
Standard
6ES7650-1AG50-2XX0 MTA 8 channels RTD;
for 6ES7331-7PF00-0AB0 (as of E version 08)
and 6ES7331-7PF01-0AB0
MTA 8 channels RTD
Standard
6ES7650-1AG51-2XX0 MTA 8 channels RTD;
for 6ES7331-7PF00-0AB0 (as of E version 8)
and 6ES7331-7PF01-0AB0
MTA 24 channels F-DI
(fail-safe)
6ES7650-1AK10-7XX0 MTA 24 channels F-DI; 24 VDC;
for 6ES7326-1BK00-0AB0 and
6ES7326-1BK01-0AB0 (as of E revision 1)
MTA 24 channels F-DI
(fail-safe)
6ES7650-1AK11-7XX0 MTA 24 channels F-DI; 24 VDC;
for 6ES7326-1BK00-0AB0
and 6ES7326-1BK01-0AB0 (as of E version 1)
MTA 10 channels F-DO
(fail-safe)
6ES7650-1AL10-6XX0 MTA 10 channels F-DO; 24 VDC/2 A;
for 6ES7326-2BF01-0AB0 (as of E version 02)
MTA 10 channels F-DO
(fail-safe)
6ES7650-1AL11-6XX0 MTA 10 channels F-DO; 24 VDC / 2A;
for 6ES7326-2BF01-0AB0 (as of E version 2)
MTA 16 channels DO
(relays)
6ES7650-1AM30-3XX0 MTA 16 channels relays DO;
120-230 VAC, 5 A; 24 V DC,5 A;
6ES7322-8BH01-0AB0 (as of E version 1)
MTA 10 channels DO
(relays)
6ES7650-1AM30-6XX0 MTA 10 channels relay DO;
110-220 VAC/5 A; 24 VDC/5 A;
for 6ES7326-2BF01-0AB0 (as of E version 02)
MTA 10 channels F-DO
(fail-safe, relays)
6ES7650-1AM31-6XX0 MTA 10 channels F-DO; relays
120-230 VAC, 5 A; 24 VDC,5 A;
for 6ES7326-2BF01-0AB0 (as of E version 2)
MTA 6 channels F-AI
(fail-safe)
6ES7650-1AH50-5XX0 MTA 6 channels F-AI; 4-20 mA;
for 6ES7336-1HE00-0AB0 (as of E version 06)
MTA 6 channels F-AI
(fail-safe)
6ES7650-1AH51-5XX0 MTA 6 channels F-AI; 4-20 mA;
for 6ES7336-1HE00-0AB0 (as of E version 6)
MTA 6 channels F-AI
(fail-safe)
6ES7650-1AH61-5XX0 MTA 6 channels F-AI; 4-20 mA;
for 6ES7336-1HE00-0AB0 (as of E version 6)
for 6ES7336-4GE00-0AB0
Properties:
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
SM - MTA
Page 31 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
Redundant Power
Monitor
6ES7650-1BA01-0XX0 Redundant Power Monitor
Redundant Power
Monitor
6ES7650-1BA02-0XX0 Redundant Power Monitor
5.6 V Zehner diode board 6ES7650-1BB51-0XX0 5.6 V Zehner diode daughter board for
F-AI MTA
6.2 V Zehner diode board 6ES7650-1BC51-0XX0 6.2 V Zehner diode daughter board for
F-AI MTA
FET switch adapter 6ES7650-1BD51-0XX0 FET switch adapter
Properties:
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
SM - MTA
Page 32 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
CP 443-1 6GK7 443-1BX00-0XE0 S7 CP for Industrial Ethernet with SEND-RECEIVE
interface, S7 communication
02/03
CP 443-1 ISO 6GK7 443-1BX01-0XE0 S7 CP for Industrial Ethernet with SEND-RECEIVE
interface, S7 communication, routing, module
replacement without programming device
02/03
CP 443-1 TCP 6GK7 443-1EX01-0XE0 S7 CP for Industrial Ethernet with TCP/IP, with SEND-
RECEIVE interface, S7 Communication, routing,
module replacement without programming device
02/03
CP 443-1 6GK7 443-1EX02-0XE0 V5.2 S7 CP for Industrial Ethernet ISO and TCP/IP with
SEND-RECEIVE and FETCH-WRITE interface, long
data, UDP, TCP, S7 functions, routing, module
replacement without programming device
02/03
CP 443-1 6GK7 443-1EX10-0XE0 V1.0 S7 CP for Industrial Ethernet ISO and TCP/IP with
SEND-RECEIVE and FETCH-WRITE interface, long
data, UDP, TCP, S7 functions, routing, module
replacement without programming device, 10/100
Mbit Fast Send/Receive
01/01
CP 443-1 6GK7 443-1EX10-0XE0 V2.x S7 CP for Industrial Ethernet ISO and TCP/IP with
SEND-RECEIVE- and FETCH-WRITE interface, long
data, UDP, TCP, S7 functions, routing, module
replacement without programming device, 10/100
Mbit Fast Send/Receive
01/01
CP 443-1 6GK7 443-1EX11-0XE0 V1.1 S7 CP for Industrial Ethernet ISO and TCP/IP with
SEND-RECEIVE and FETCH-WRITE interface, long
data, UDP, TCP, S7 functions, routing, module
replacement without programming device, 10/100
Mbit
CP 443-1 6GK7 443-1EX11-0XE0 V2.x S7 CP for Industrial Ethernet ISO and TCP/IP with
SEND-RECEIVE- and FETCH-WRITE interface, long
data, UDP, TCP, S7 functions, routing, module
replacement without programming device, 10/100
Mbit, NTP, static MAC address.
CP 443-1 6GK7 443-1EX20-0XE0 V2.x S7 CP for Industrial Ethernet ISO and TCP/IP with
SEND-RECEIVE and FETCH-WRITE interface, long
data, UDP, TCP, S7 functions, routing, module
replacement without programming device, 10/100
Mbit, NTP, static MAC address, 2-port switch
CP 443-5 Extended 6GK7 443-5DX01-0XE0 CP for Profibus with PROFIBUS DP, SEND-
RECEIVE interface, FMS and S7 Communication;
Sync/Freeze
10/01
CP 443-5 Extended 6GK7 443-5DX02-0XE0 V3.x PROFIBUS CP: DP master with Sync/Freeze and
redundancy, slave-cross traffic, constant bus cycle
time, SEND-RECEIVE interface, S7 functions, time-o
f
day, PG routing, data set routing, firmware V3.3
08/01
CP 443-5 Extended 6GK7 443-5DX03-0XE0 V4.x PROFIBUS CP: DP master with Sync/Freeze and
redundancy, direct data exchange, constant bus cycl
e
time, SEND-RECEIVE interface, S7 functions, time
synchronization, routing, data set routing, DPV1,
firmware V4.0
X 05/05
CP 443-5 Extended 6GK7 443-5DX03-0XE0 V5.x PROFIBUS CP: DP master with Sync/Freeze and
redundancy, direct data exchange, constant bus cycl
e
time, SEND-RECEIVE interface, S7 functions, time
synchronization, data set routing, DPV1, CIR,
firmware V5.x
X X 05/05
CP 443-5 Extended 6GK7 443-5DX04-0XE0 V6.x PROFIBUS CP: DP master with Sync/Freeze and
redundancy, direct data exchange, constant bus cycl
e
time, SEND-RECEIVE interface, S7 functions, time
synchronization, data set routing, DPV1, CIR,
firmware V6.x
XX
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
S7-400
CP - Profibus
CP - Ethernet
Page 33 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
FM458-1 DP 6DD1607-0AA2 V2.x Application module for SIMATIC S7-400: designed to
realise high performant and free configurable control
tasks. 1DP-connection, 60MB user program memory,
OEM Knowhow protection
EXM 438-1 6DD1607-0CA1 I/O expansion module for FM458
EXM 448-2 6DD1607-0EA2 Communication expansion module for FM458
CPU 414-2 DP 6ES7 414-2XJ00-0AB0 S7 CPU; work memory 384K; 0.1 ms/kA; 8K DI/O; 32
connections; MPI and PROFIBUS DP connection
04/98
CPU 414-2 DP 6ES7 414-2XJ01-0AB0 S7 CPU; work memory 384K; 0.1 ms/kA; 8K DI/O; 32
connections; MPI and PROFIBUS DP connection
03/00
CPU 416-2 DP 6ES7 416-2XK00-0AB0 S7 CPU; work memory 0.8 MB; 0.08 ms/kA; 16K
DI/O; 64 connections; MPI and PROFIBUS DP
connection
04/98
CPU 416-2 DP 6ES7 416-2XK01-0AB0 S7 CPU; work memory 0.8 MB; 0.08 ms/kA; 16K
DI/O; 64 connections; MPI and PROFIBUS DP
connection
02/01
CPU 416-2 DP 6ES7 416-2XL00-0AB0 S7 CPU; work memory 1.6 MB; 0.08 ms/kA; 16K
DI/O; 64 connections; MPI and PROFIBUS DP
connection
05/98
CPU 416-2 DP 6ES7 416-2XL01-0AB0 S7 CPU; work memory 1.6 MB; 0.08 ms/kA; 16K
DI/O; 64 connections; MPI and PROFIBUS DP
connection
02/01
1) The CPUs of this
g
eneration are onl
y
su
pp
orted b
y
the driver conce
p
t u
p
to PCS7 V4.0
2
An upgrade of the driver concept as of PCS7 V5.0 is not possible.
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Supported
R = Redundant I/O: X = Supported; A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
FM
CPU before 04/99
(
u
p
to PCS7 V4.02
)
1)
Page 34 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
CPU 414-3 6ES7 414-3XJ00-0AB0 V1.1 S7 CPU; work memory 384K code and 384K data;
0.1 ms/kA; 8K DI/O; 32 connections; 2*DP/MPI and 1
receptacle for IF submodules; constant bus cycle time
X 01/05
CPU 414-3 6ES7 414-3XJ00-0AB0 V1.2 S7 CPU; work memory 384K code and 384K data;
0.1 ms/kA; 8K DI/O; 32 connections; 2*DP/MPI and 1
receptacle for IF submodules; constant bus cycle
time, cross-traffic; routing
X 01/05
CPU 414-3 6ES7 414-3XJ00-0AB0 V3.0 Work memory 384K code and 384K data; 0.1 ms/kA;
8K DI/O; 32 connections; 2*DP/MPI and 1 receptacle
for intelligent submodules; direct data exchange,
constant bus cycle time; routing; DPV1; firmware V3.0
X 01/05
CPU 414-3 6ES7 414-3XJ00-0AB0 V3.1 Work memory 384K code and 384K data; 0.1 ms/kA;
8K DI/O; 32 connections 2*DP/MPI and 1 receptacle
for I submodules; direct data exchange, constant bus
cycle time; routing; DPV1; firmware V3.1
X X 01/05
CPU 416-2 6ES7 416-2XK02-0AB0 V1.1 S7 CPU; work memory 0.8 MB code and 0.8 MB
data; 0.08 ms/kA; 16K DI/O; 64 connections;
2*DP/MPI; constant bus cycle time
X 01/05
CPU 416-2 6ES7 416-2XK02-0AB0 V1.2 S7 CPU; work memory 0.8 MB code and 0.8 MB
data; 0.08 ms/kA; 16K DI/O; 64 connections;
2*DP/MPI; constant bus cycle time, cross-traffic;
routing
X 01/05
CPU 416-2 6ES7 416-2XK02-0AB0 V3.0 Work memory 0.8 MB code and 0.8 MB data; 0.08
ms/kA; 16K DI/O; 64 connections; 2*DP/MPI; direct
data exchange, constant bus cycle time; routing;
DPV1; firmware V3.0
X 01/05
CPU 416-2 6ES7 416-2XK02-0AB0 V3.1 Work memory 0.8 MB code and 0.8 MB data; 0.08
ms/kA; 16K DI/O; 64 connections; 2*DP/MPI; direct
data exchange, constant bus cycle time; routing;
DPV1; firmware V3.1
X X 01/05
CPU 416-3 6ES7 416-3XL00-0AB0 V1.1 S7 CPU; work memory 1.6 MB code and 1.6MB data;
0.08 ms/kA; 16KB DI/O; 64 connections; 2*DP/MPI
and 1 receptacle for IF submodules; constant bus
cycle time
X 01/05
CPU 416-3 6ES7 416-3XL00-0AB0 V1.2 S7 CPU; work memory 1.6 MB code and 1.6MB data;
0.08 ms/kA; 16K DI/O; 64 connections; 2*DP/MPI an
d
1 receptacle for IF submodules; constant bus cycle
time, cross traffic; routing
X 01/05
CPU 416-3 6ES7 416-3XL00-0AB0 V3.0 Work memory 1.6 MB code and 1.6 MB data; 0.08
ms/kA; 16K DI/O; 64 connections; 2*DP/MPI and 1
receptacle for IF submodules; direct data exchange,
constant bus cycle time; routing; DPV1; firmware V3.0
X 01/05
CPU 416-3 CPU 416-3 V3.1 Work memory 1.6 MB code and 1.6 MB data; 0.08
ms/kA; 16K DI/O; 64 connections; 2*DP/MPI and 1
receptacle for IF submodules; direct data exchange,
constant bus cycle time; routing; DPV1; firmware V3.1
X X 01/05
1) The new driver conce
p
t
(
PCS7 V5.2
)
is onl
y
su
pp
orted b
y
the CPUs with the FW V3.0 or hi
g
he
r
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Supported XE = Standalone only;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
CPU as of 04/99
(
as of PCS7 V5.0
)
1)
Page 35 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
CPU 417-4 6ES7 417-4XL00-0AB0 V1.1 S7 CPU;
work memory 2 MB code and 2 MB data,
(expandable up to 20 MB); 0.1 ms/kA; 16K DI/O; 64
connections; 2*DP/MPI and 2 slots for IF
submodules; receive functionality for cross-traffic;
constant bus cycle time; routing; firmware V1.1
X 01/05
CPU 417-4 6ES7 417-4XL00-0AB0 V1.2.0 S7 CPU;
work memory 2 MB code and 2 MB data,
(expandable up to 20 MB); 0.1 ms/kA; 16K DI/O; 64
connections; 2*DP/MPI and 2 slots for IF
submodules; constant bus cycle time/cross-traffic;
routing
X 01/05
CPU 417-4 6ES7 417-4XL00-0AB0 V3.0 Work memory 2 MB code and 2 MB data,
(expandable up to 20 MB); 0.1 ms/kA; 16K DI/O; 64
connections; 2*DP/MPI and 2 slots for IF
submodules; receive functionality for direct data
exchange, constant bus cycle time, routing, DPV1,
firmware V3.0
X 01/05
CPU 417-4 6ES7 417-4XL00-0AB0 V3.1 Work memory 2 MB code and 2 MB data,
(expandable up to 20 MB); 0.1 ms/kA; 16K DI/O; 64
connections; 2*DP/MPI and 2 slots for IF
submodules; receive functionality for direct data
exchange, constant bus cycle time, routing, DPV1,
firmware V3.1
X X 01/05
CPU 414-4H 6ES7 414-4HJ00-0AB0 V2.1.1
V2.1.2
Redundant CPU with fails-safe functionality, work
memory 384K code and 384K data; 0.1 ms/kA; 8K
DI/O; 32 connections; 2*DP/MPI and 2 slots for H-
Sync submodules
X 01/06
CPU 414-4H 6ES7 414-4HJ00-0AB0 V3.0 Redundant CPU with fail-safe functionality, work
memory 384K code and 384K data; 0.1 ms/kA; 8 K
DI/O; 32 connections; 2*DP/MPI and 2 slots for H-
Sync submodules, direct data exchange, DPV1;
firmware V3.0
X 01/06
CPU 414-4H 6ES7 414-4HJ00-0AB0 V3.1 Redundant CPU with fails-safe functionality, work
memory 384K code and 384K data; 0.1 ms/kA; 8K
DI/O; 32 connections; 2*DP/MPI and 2 slots for H-
Sync submodules, direct data exchange, DPV1;
firmware V3.1
X X 01/06
CPU 417-4H 6ES7 417-4HL00-0AB0 V2.0
V2.1.x
Redundant CPU; work memory 2 MB code and 2 MB
data; (expandable up to 20 MB); 0.1 ms/kA; 16K
DI/O; 64 connections; 2*DP/MPI and 2 slots for IF
submodules, routing, firmware V2.0
X 09/00
CPU 417-4H 6ES7 417-4HL01-0AB0 V2.1 Redundant, work memory 2 MB code and 2 MB data;
(expandable up to 20 MB); 0.1 ms/kA; 16K DI/O; 64
connections; 2*DP/MPI and 2 slots for H-Sync
submodules, routing, firmware V2.1
X 01/06
CPU 417-4H 6ES7 417-4HL01-0AB0 V2.1.1
V2.1.2
Redundant, work memory 2 MB code and 2 MB data;
(expandable up to 20 MB); 0.1 ms/kA; 16K DI/O; 64
connections; 2*DP/MPI and 2 slots for H-Sync
submodules, routing, firmware V2.1
X 01/06
CPU 417-4H 6ES7 417-4HL01-0AB0 V3.0 Redundant CPU, fails-safe functionality, work
memory 2 MB code and 2 MB data; (expandable up
to 20 MB); 0.1 ms/kA; 16K DI/O; 64 connections;
2*DP/MPI and 2 slots for H-Sync submodules, direct
data exchange, routing, DPV1, firmware V3.0
X 01/06
CPU 417-4H 6ES7 417-4HL01-0AB0 V3.1 Redundant CPU with fails-safe functionality, work
memory 2 MB code and 2 MB data; (expandable up
to 20 MB); 0.1 ms/kA; 16K DI/O; 64 connections;
2*DP/MPI and 2 slots for H-Sync submodules, direct
data exchange, routing, DPV1, firmware V3.1
X X 01/06
1) The new driver conce
p
t
(
PCS7 V5.2
)
is onl
y
su
pp
orted b
y
the CPUs with the FW V3.0 or hi
g
he
r
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Supported
R = Redundant I/O: X = Supported; A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
CPU as of 04/99
(
as of PCS7 V5.0
)
1)
Page 36 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
CPU 414-3 6ES7 414-3XJ04-0AB0 V4.x S7 CPU;
work memory 0.7 MB code and 0.7 MB data;
0.06 ms/kAW; 8K DI/O; 32 connections;
1*DP/MPI, 1*DP and 1slot for IF submodules;
send and receive functionality for direct
data exchange; constant bus cycle time and
isochronous mode; routing; firmware V4.0
X X 03/07
CPU 416-2 6ES7 416-2XK04-0AB0 V4.x S7 CPU;
work memory 1.4 MB code and 1.4 MB data;
0.04 ms/kAW; 16K DI/O; 64 connections;
1*DP/MPI and 1*DP;
send and receive functionality for direct
data exchange; constant bus cycle time and
isochronous mode; routing; firmware V4.0
X X 03/07
CPU 416-3 6ES7 416-3XL04-0AB0 V4.x S7 CPU;
work memory 2.8 MB code and 2.8 MB data;
0.04 ms/kAW; 16K DI/O; 64 connections;
1*DP/MPI, 1*DP and 1 slot for IF submodules;
send and receive functionality for direct
data exchange; constant bus cycle time and
isochronous mode;
routing; firmware V4.0
X X 03/07
CPU 417-4 6ES7 417-4XL04-0AB0 V4.x S7 CPU;
work memory 10 MB code and 10 MB data;
0.03 ms/kAW; 16K DI/O; 64 connections;
1*DP/MPI, 1*DP and 2 slots for IF submodules;
send and receive functionality for direct
data exchange; constant bus cycle time and
isochronous mode;
routing; firmware V4.0
X X 03/07
CPU 414-4H 6ES7 414-4HJ04-0AB0 V4.x S7 CPU;
supports redundant and fail-safe mode,
work memory 0.7 MB code and 0.7 MB data;
0.08 ms/kAW; 8K DI/O; 32 connections;
1*DP/MPI, 1*DP and 2 slots for H-Sync submodules;
firmware V4.0
X X 01/10
CPU 417-4H 6ES7 417-4HL04-0AB0 V4.x S7 CPU;
supports redundant and fail-safe mode;
work memory 10 MB code and 10 MB data;
0.03 ms/kAW; 16K DI/O; 64 connections;
1*DP/MPI, 1*DP und 2 slots for H-Sync submodules;
firmware V4.0
X X 01/10
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Supported
R = Redundant I/O: X = Supported; A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
CPU as of 08/04 (as of PCS7 V6.1)
Page 37 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
CPU 414-3 DP 6ES7 414-3XM05-0AB0 V5.0 S7 CPU;
work memory 1.4 MB code and 1.4 MB data; 0.045
ms/kAW; 8K DI/O; 32 connections; 1*DP/MPI, 1*DP
and 1 slot for IF modules;
supports redundant and fail-safe mode for direct data
communication; constant bus cycle time and
isochronous mode;
routing; firmware V5.0
XX
CPU 414-3 DP 6ES7 414-3XM05-0AB0 V5.1 ..
V5.3
S7 CPU;
work memory 1.4 MB code and 1.4 MB data; 0.045
ms/kAW; 8K DI/O; 32 connections; 1*DP/MPI, 1*DP
and 1 slot for IF modules;
send and receive functionality for direct data
communication; constant bus cycle time and
isochronous mode; routing; integrated data record
gateway;
firmware V5.1 .. V5.3
XX
CPU 414-3 PN/DP 6ES7 414-3EM05-0AB0 V5.0 S7 CPU;
work memory 1.4 MB code and 1.4 MB data; 0.045
ms/kAW; 8K DI/O; 32 connections; 1*DP/MPI, 1*PN
and 1 slot for IF module;
send and receive functionality for direct data
communication; constant bus cycle time and
isochronous mode; routing; firmware V5.0
XX
CPU 414-3 PN/DP 6ES7 414-3EM05-0AB0 V5.1 ..
V5.3
S7 CPU;
work memory 1.4 MB code and 1.4 MB data; 0.045
ms/kAW; 8K DI/O; 32 connections; 1*DP/MPI, 1*PN
and 1 slot for IF modules; send and receive
functionality for direct data communication;
constant bus cycle time and isochronous mode;
routing; integrated data record gateway;
firmware V5.1 .. V5.3
XX
CPU 416-2 DP 6ES7 416-2XN05-0AB0 V5.0 S7 CPU;
work memory 2.8 MB code and 2.8 MB data; 0.030
ms/kAW; 16K DI/O; 64 connections; 1*DP/MPI and
1*DP;
send and receive functionality for direct data
communication;
constant bus cycle time and isochronous mode;
routing; firmware V5.0
XX
CPU 416-2 DP 6ES7 416-2XN05-0AB0 V5.1 ..
V5.3
S7 CPU;
work memory 2.8 MB code and 2.8 MB data; 0.030
ms/kAW; 16K DI/O; 64 connections; 1*DP/MPI and
1*DP;
send and receive functionality for direct data
communication;
constant bus cycle time and isochronous mode;
routing; integrated data record gateway;
firmware V5.1 .. V5.3
XX
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Supported
R = Redundant I/O: X = Supported; A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
CPU as of 12/06 (as of PCS7 V7.0)
Page 38 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
CPU 416-3 DP 6ES7 416-3XR05-0AB0 V5.0 S7 CPU;
work memory 5.6 MB code and 5.6 MB data; 0.030
ms/kAW; 16K DI/O; 64 connections; 1*DP/MPI, 1*DP
and 1 slot for IF module;
send and receive functionality for direct data
communication;
constant bus cycle time and isochronous mode;
routing; firmware V5.0
XX
CPU 416-3 DP 6ES7 416-3XR05-0AB0 V5.1 ..
V5.3
S7 CPU;
work memory 5.6 MB code and 5.6 MB data; 0.030
ms/kAW; 16K DI/O; 64 connections; 1*DP/MPI, 1*DP
and 1 slot for IF modules;
send and receive functionality for direct data
communication;
constant bus cycle time and isochronous mode;
routing; firmware V5.1 .. V5.3
XX
CPU 416-3 PN/DP 6ES7 416-3ER05-0AB0 V5.0 S7 CPU;
work memory 5.6 MB code and 5.6 MB data; 0.030
ms/kAW; 16K DI/O; 64 connections; 1*DP/MPI, 1*PN
and 1 slot for IF module;
send and receive functionality for direct data
communication; constant bus cycle time and
isochronous mode; routing; ; firmware V5.0
XX
CPU 416-3 PN/DP 6ES7 416-3ER05-0AB0 V5.1 ..
V5.3
S7 CPU;
work memory 5.6 MB code and 5.6 MB data; 0.030
ms/kAW; 16K DI/O; 64 connections; 1*DP/MPI, 1*PN
and 1 slot for IF modules;
send and receive functionality for direct data
communication;
constant bus cycle time and isochronous mode;
routing; firmware V5.1 .. V5.3
XX
CPU 417-4 DP 6ES7 417-4XT05-0AB0 V5.0 S7 CPU;
work memory 15 MB code and 15 MB data;
0.018 ms/kAW; 16K DI/O; 64 connections; 1*DP/MPI,
1*DP and 2 slots for IF modules;
send and receive functionality for direct data
communication;
constant bus cycle time and isochronous mode;
routing; firmware V5.0
XX
CPU 417-4 DP 6ES7 417-4XT05-0AB0 V5.1 ..
V5.3
S7 CPU;
work memory 15 MB code and 15 MB data;
0.018 ms/kAW; 16K DI/O; 64 connections; 1*DP/MPI,
1*DP and 2 slots for IF modules;
send and receive functionality for direct data
communication;
constant bus cycle time and isochronous mode;
routing; firmware V5.1 .. V5.3
XX
CPU 414-3 PN/DP 6ES7 414-3EM06-0AB0 V6.x S7 CPU;
work memory 2,0 MB code and 2,0 MB data; 0.045
ms/kAW; 8K DI/O; 64 connections; 1*DP/MPI, 1*PN
and 1 slot for IF module;
send and receive functionality for direct data
communication;
constant bus cycle time and isochronous mode;
routing; firmware V6.x
XX
CPU 416-3 PN/DP 6ES7 416-3ES06-0AB0 V6.x S7 CPU;
work memory 8,0 MB code and 8,0 MB data; 0.030
ms/kAW; 16K DI/O; 96 connections; 1*DP/MPI, 1*PN
and 1 slot for IF modules;
send and receive functionality for direct data
communication;
constant bus cycle time and isochronous mode;
routing; firmware V6.x
XX
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Supported
R = Redundant I/O: X = Supported; A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
CPU as of 08/10 (as of PCS7 V7.1.2)
CPU as of 12/06 (as of PCS7 V7.0)
Page 39 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
CPU 412-3H 6ES7 412-3HJ14-0AB0 V4.5 S7 CPU;
Supports redundant and fail-safe mode;
work memory 0.5 MB code und 0.25 MB data;
0.075 ms/kAW; 8K DI/O; 16 connections;
1*DP/MPI, 1*DP and 2 slots for H-Sync modules;
firmware V4.5
XX
CPU 414-4H 6ES7 414-4HM14-0AB0 V4.5 S7 CPU;
Supports redundant and fail-safe mode;
work memory 1.4 MB code and 1.4 MB data;
0.045 ms/kAW; 8K DI/O; 32 connections;
1*DP/MPI, 1*DP and 2 slots for H-Sync modules;
firmware V4.5
XX
CPU 417-4H 6ES7 417-4HT14-0AB0 V4.5 S7 CPU;
Supports redundant and fail-safe mode;
work memory 15MB code und 15MB data;
0.018 ms/kAW; 16KB DI/O; 64 connections;
1*DP/MPI, 1*DP and 2 slots for H-Sync modules;
firmware V4.5
XX
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Supported
R = Redundant I/O: X = Supported; A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
CPU as of 09/07(as of PCS7 V7.0.1)
Page 40 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
IM 460-0 6ES7 460-0AA00-0AB0 Send IM, 3m, without voltage transmission, with
communication bus
12/01
IM 460-0 6ES7 460-0AA01-0AB0 Send IM for central coupling up to 3 m, no 5 V signal
transmission, with communication bus
IM 460-1 6ES7 460-1BA00-0AB0 Send IM, 1.5 m, with voltage signal transmission, no
communication bus
12/01
IM 460-1 6ES7 460-1BA01-0AB0 Send IM for central coupling up to 1.5m; with voltage
signal transmission, without communication bus
IM 460-3 6ES7 460-3AA00-0AB0 Send IM, 100 m, no voltage signal transmission, with
communication bus
12/01
IM 460-3 6ES7 460-3AA01-0AB0 Send IM, 100 m, no voltage signal transmission, with
communication bus
IM 460-4 6ES7 460-4AA01-0AB0 Send IM, 600 m, voltage signal transmission, no
communication bus
IM 461-0 6ES7 461-0AA00-0AA0 Receive IM for central coupling up to 3 m, voltage
signal transmission, with communication bus
12/01
IM 461-0 6ES7 461-0AA01-0AA0 Receive IM for central coupling up to 3m, voltage
signal transmission, with communication bus
IM 461-1 6ES7 461-1BA00-0AA0 Receive IM, 1.5 m, with 5 V signal transmission, no
communication bus
12/01
IM 461-1 6ES7 461-1BA01-0AA0 Receive IM for central coupling up to 1.5 m, with
voltage signal transmission, no communication bus
IM 461-3 6ES7 461-3AA00-0AA0 Receive IM, 100 m, no voltage signal transmission,
with communication bus
12/01
IM 461-3 6ES7 461-3AA01-0AA0 Receive IM, 100 m, no voltage signal transmission,
with communication bus
IM 461-4 6ES7 461-4AA01-0AA0 Receive IM, 600 m, no voltage signal transmission,
with communication bus
IM 463-2 6ES7 463-2AA00-0AA0 Send IM, 600 m, for interconnection S5-EG with
IM314
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
IM
Page 41 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
PS 405 10 A 6ES7 405-0KA00-0AA0 Power supply 24 VDC/10 A 02/01
PS 405 10 A 6ES7 405-0KA01-0AA0 PS 405, 24 VDC/10 A standard PS 03/05
PS 405 10 A 6ES7 405-0KA02-0AA0 PS 405, 24 VDC/10 A, ATEX approval
PS 405 20 A 6ES7 405-0RA01-0AA0 PS 405, 24 VDC/20 A, standard PS
PS 405 20 A 6ES7 405-0RA02-0AA0 PS 405, 24 VDC/20 A, standard PS, ATEX approval
PS 405 10 A 6ES7 405-0KR00-0AA0 PS 405, 24 VDC/10 A, redundant PS
PS 405 10 A 6ES7 405-0KR02-0AA0 PS 405, 24 VDC/10 A, redundant PS,
ATEX approved
PS 407 10 A 6ES7 407-0KA00-0AA0 Power supply 120/230 VAC/10 A 03/99
PS 407 10 A 6ES7 407-0KA01-0AA0 PS 407, 120/230 VAC / 10 A, standard PS
PS 407 10 A 6ES7 407-0KA02-0AA0 PS 407, 120/230 VAC / 10 A, standard PS
PS 407 20 A 6ES7 407-0RA01-0AA0 PS 407, 120/230 VAC / 20 A, standard PS
PS 407 20 A 6ES7 407-0RA02-0AA0 PS 407, 120/230 VAC / 20 A, standard PS
PS 407 10 A 6ES7 407-0KR00-0AA0 PS 407, 120/230 VAC / 10 A, redundant PS
PS 407 10 A 6ES7 407-0KR02-0AA0 PS 407, 120/230 VAC / 10 A, redundant PS
UR2 6ES7 400-1JA00-0AA0 Universal rack, 9 slots, not suitable for redundant
power supply modules
01/98
UR2 6ES7 400-1JA01-0AA0 UR2; universal rack, 9 slots
UR2ALU 6ES7 400-1JA11-0AA0
UR2; universal aluminum rack, 9 slots
UR1 6ES7 400-1TA00-0AA0 Universal rack, 18 slots, not suitable for redundant
power supply modules
08/98
UR1 6ES7 400-1TA01-0AA0 UR1; universal rack, 18 slots
UR1ALU 6ES7 400-1TA11-0AA0 UR1; universal aluminum rack,
18 slots
UR2-H 6ES7 400-2JA00-0AA0 Central rack, 18 slots, 2 segments (9+9), preferably
used for H systems
UR2ALU-H 6ES7 400-2JA10-0AA0 Central aluminum rack, 18 slots, 2 segments (9+9),
preferably used for H systems
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Racks
PS
Page 42 of 43
Release 01.04.2011
A5E02124692-03
SIMATIC PCS 7 - Released Modules
Product Name MLFB FW
Version
Short Description Properties
W C R T
SM421 DI32x24VDC 6ES7 421-1BL00-0AA0 Digital input module; 32 DI, 24 VDC, rooting in groups
of 32
X 10/04
SM421 DI32x24VDC 6ES7 421-1BL01-0AA0 Digital input module; 32 DI, 24 VDC, rooting in groups
of 32
X
SM421 DI32x120VAC 6ES7 421-1EL00-0AA0 Digital input module; 32 DI, 120 V UC, rooting in
groups of 8
X
SM421
DI16x120/230VUC
6ES7 421-1FH00-0AA0 Digital input module; 16 DI, 120/230 V UC, rooting in
groups of 4
X 08/02
SM421
DI16x120/230VUC
6ES7 421-1FH20-0AA0 Digital input module; 16 DI, 120/230 V UC,
rooting in groups of 4, input characteristic to IEC
1131, type 2
X
SM421 DI16x24VDC 6ES7 421-7BH00-0AB0 Digital input module; 16 DI, 24VDC, single-channel
rooting, process and diagnostic interrupt, substitute
values can be assigned as parameters
X 10/04
SM421
DI 16xDC 24V
6ES7 421-7BH01-0AB0 Digital input module; 16 DI, DC 24 V, rooting in
groups of 8, process and diagnostic interrupt,
substitute values can be assigned as parameters
X
SM421 DI16x24/60VUC
interrupt
6ES7 421-7DH00-0AB0 Digital input module; 16 DI, 24...60 V UC, single-
channel rooting, process and diagnostic interrupt
X
SM421 DI16x120VAC 6ES7 421-5EH00-0AA0 Digital input module; 16 DI, 120 VAC, single-channel
rooting, input characteristic to IEC 1131, type 2
X 10/04
SM422
DO16x24VDC/2A
6ES7 422-1BH10-0AA0 Digital output module; 16 DO 24 VDC/2 A, rooting in
groups of 8
X 10/04
SM422
DO16x24VDC/2A
6ES7 422-1BH11-0AA0 Digital output module; 16 DO 24 VDC/2 A, rooting in
groups of 8
X
SM422
DO32x24VDC/0.5A
6ES7 422-1BL00-0AA0 Digital output module; 32 DO 24 VDC/0.5 A, rooting i
n
groups of 32
X
SM422 DO8x
120/230VAC/5A
6ES7 422-1FF00-0AA0 Digital output module; 8DO 120/230 VAC/5 A, single-
channel rooting
X 10/04
SM422
DO16x120/230VAC/2A
6ES7 422-1FH00-0AA0 Digital output module; 16 DO 120/230 VAC/2 A,
rooting in groups of 4
X
SM422
DO16x 230VAC/5A
Relays
6ES7 422-1HH00-0AA0 Digital output module; DO 16xrel., 230 VAC/60
VDC/5 A, rooting in groups of 4
X
SM422 DO32x
24VDC/0.5A
6ES7 422-7BL00-0AB0 Digital output module; 32 DO, 24 VDC/0.5 A, rooting
in groups of 8, diagnostics, programmable substitute
values
X
SM422 DO16x
120VAC/2A
6ES7 422-5EH00-0AB0 Digital output module 16 DO, 120 VAC/2 A,
diagnostics
X 10/04
SM422
DO16x 20-125VDC/1.5A
6ES7 422-5EH10-0AB0 Digital output module 16 DO, 20-125 VDC/1.5 A,
diagnostics, rooting in groups of 8
X 10/04
SM431 AI16x13 bits 6ES7 431-0HH00-0AB0 Analog input module; AI 16x13 bits, integration time
16.7/20 ms
X
SM431 AI8 x 13 bits 6ES7 431-1KF00-0AB0 Analog input module AI 8x12+1 bits, integration time
16.7/20 ms
X
SM431 AI8 x 14 bits 6ES7 431-1KF10-0AB0 Analog input module AI 8x13+1 bits, integration time
16.7/2 0ms; linearization (RTD/TC)
X
SM431 AI8 x 14 bits 6ES7 431-1KF20-0AB0 Analog input module AI 8x13+1 bits, conversion time
10 µs
X
SM431 AI16 x 16 bits 6ES7 431-7QH00-0AB0 Analog input module AI 16x15+1 bits, integration time
16.7/20 ms; linearization (RTD/TC), diagnostics
X
SM431 AI8 x 16 bits 6ES7 431-7KF00-0AB0 Analog input module "TC/U" 8 channels, isolated per
channel
X
SM431 AI8 x 16 bits 6ES7 431-7KF10-0AB0 Analog input module "RTD" 16 bits, 8 channels X
SM432 AO8 x 13 bits 6ES7 432-1HF00-0AB0 Analog output module AO 8x13 bits, conversion time
420 µs, 0 V to 10 V/0..20 mA
X
Properties:
W = Module wizard: X = Supported
C = CiR support: X = Station insertion/removal by means of CiR is supported; S = Station can be reprogrammed in "online" mode;
M = Module insertion/removal by means of CiR is supported; O = Module can be reprogrammed in "online" mode;
R = Redundant I/O: X = Supported A = Redundant connection possible T = TIA release only
M = module-specific; C = channel-specific
T = Type discontinued: at specified date
Notice:
The SIPLUS versions of the modules contained in this document are also released for PCS7.
SM - AO
SM - DI
SM - DO
SM - AI
Page 43 of 43
Release 01.04.2011
A5E02124692-03
