Photomicrosensor (Transmissive) EE-SX3009-P1/-SX4009-P1 197
Photomicrosensor (Transmissive)
EE-SX3009-P1/-SX4009-P1
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Features
Screw-mounting model.
High resolution with a 0.5-mm-wide sensing aperture.
With a 5-mm-wide groove.
Photo IC output signals directly connect with C-MOS and TTL.
Connects to Tyco Electronics AMP’s EI-series connectors.
RoHS Compliant.
Absolute Maximum Ratings (Ta = 25°C)
Note: Refer to the temperature rating chart if the ambient temperature
exceeds 25°C.
Ordering Information
Electrical and Optical Characteristics (Ta = 25°C, VCC = 5 V ±10%)
Internal Circuit
Dimensions Tolerance
4 mm max. ±0.2
4 < mm 16 ±0.3
16 < mm 63 ±0.5
Terminal No. Name
V Power supply
(Vcc)
O Output (OUT)
G Ground (GND)
V
G
O
Recommended Mating Connectors:
Tyco Electronics AMP 171822-3 (crimp connector)
172142-3 (crimp connector)
OMRON EE-1005 (with harness)
Optical
axis
171825-3
(Tyco Electronics AMP)
3±0.1 dia, depth: 2
0.5 (Aperture width)
Two, R1
4.2±0.2 dia. hole
4
0
0.1
dia.
34
23±0.2
10.5
7.5
Unless otherwise specified, the
tolerances are as shown below.
Item Symbol Rated value
Power supply voltage VCC 10 V
Output voltage VOUT 28 V
Output current IOUT 16 mA
Permissible output dissipation POUT 250 mW (see note)
Ambient
temperature
Operating Topr –25°C to 75°C
Storage Tstg –40°C to 85°C
Soldering temperature Tsol ---
Description Model
Photomicrosensor (transmissive) Dark ON EE-SX3009-P1
Light ON EE-SX4009-P1
Item Symbol Value Condition
Current consumption ICC 30 mA max. With and without incident
Low-level output voltage VOL 0.3 V max. IOUT = 16 mA
Without incident (EE-SX3009-P1)
With incident (EE-SX4009-P1)
High-level output voltage VOH (VCC x 0.9) V min. VOUT = VCC
With incident (EE-SX3009-P1)
Without incident (EE-SX4009-P1), RL = 47 kΩ
Response frequency f 3 kHz min. VOUT = VCC, RL = 47 kΩ (see note)
Note: The value of the response frequency is measured by
rotating the disk as shown below.
2.1 mm
0.5 mm
0.5 mm
t = 0.2 mm
Disk
198 Photomicrosensor (Transmissive) EE-SX3009-P1/-SX4009-P1
Engineering Data
Note: The values in the parentheses apply to the EE-SX4009-P1.
Wiring
Output Allowable Dissipation vs.
Ambient Temperature Characteristics
Ambient temperature Ta (°C)
Sensing Position Characteristics
(Typical)
Output allowable dissipation Pc (mW)
Output transistor
Distance d (mm)
Center of
optical axis
Light interrupting plate
d
1
= 0±0.3 mm V
CC
= 5 V, Ta = 25°C
R
L
= 47 kΩ
ON
(OFF)
OFF
(ON)
EE-1005 Connector
(1) (2) (3)
1,000±20
No. Name Model Quantity Maker
1 Receptacle
housing
171822-3 1 Tyco Electronics
AMP
2 Receptacle
contact
170262-1 3 Tyco Electronics
AMP
3 Lead wire UL1007 AWG24 3 ---
Connector
circuit no.
Lead wire
color
Output when connected
to EE-SX4009-P1/EE-SX3009-P1
1RedV
CC
2 Orange GND
3YellowOUT
Photomicrosensor (Transmissive) EE-SX3009-P1/-SX4009-P1
MEMO
Photomicrosensor (Transmissive) EE-SX3009-P1/-SX4009-P1
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Cat. No. X305-E-1 Printed in USA
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
10/10 Specifications subject to change without notice
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.