1/7
www.dynexsemi.com
DFM1200FXM18-A000
FEATURES
Low Reverse Recovery Charge
High Switching Speed
Low Forward Voltage Drop
Isolated Base
Dual Diodes Can Be Paralleled for 2400A Rating
MMC Baseplate With AlN Substrates
APPLICATIONS
Brake Chopper Diode
Boost and Buck Converters
Free-wheel Circuits
Motor Drives
Resonant Converters
Induction Heating
Multi-level Switch Inverters
The DFM1200FXM18-A000 is a dual 1800 volt, fast
recovery diode (FRD) module. Designed for low power
loss, the module is suitable for a variety of high voltage
applications in motor drives and power conversion.
Fast switching times and low reverse recovery losses
allow high frequency operation making the device suitable
for the latest drive designs employing pwm and high
frequency switching.
These modules incorporate electrically isolated base
plates and low inductance construction enabling circuit
designers to optimise circuit layouts and utilise grounded
heat sinks for safety.
ORDERING INFORMATION
Order As:
DFM1200FXM18-A000
Note: When ordering, please use the complete part number.
DFM1200FXM18-A000
Fast Recovery Diode Module
Preliminary Information
DS5420-1.5 April 2001
KEY PARAMETERS
VRRM 1800V
VF(typ) 2.0V
IF(max) 1200A
IFM (max) 2400A
Fig. 1 Dual diode circuit diagram
Fig. 2 Electrical connections - (not to scale)
Outline type code: F
(See package details for further information)
13
2
4
2(C2)1(C1)
3(A1) 4(A2)
External connection
External connection
External connection for single 2400A diode application
DFM1200FXM18-A000
2/7
www.dynexsemi.com
Units
V
A
A
A2s
W
kV
pC
ABSOLUTE MAXIMUM RATINGS - PER ARM
Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. In extreme
conditions, as with all semiconductors, this may include potentially hazardous rupture of the package. Appropriate safety
precautions should always be followed. Exposure to Absolute Maximum Ratings may affect device reliability.
Tcase = 25˚C unless stated otherwise
Symbol
VRRM
IF
IFM
I2t
Pmax
Visol
Qpd
Test Conditions
Tvj = 125˚C
DC, Tcase = 75˚C, Tvj = 125˚C
Tcase = 110˚C, tp = 1ms
VR = 0, tp = 10ms, Tvj = 125˚C
Tcase = 25˚C, Tvj = 125˚C
Commoned terminals to base plate. AC RMS, 1 min, 50Hz
IEC1287. V1 = 1500V, V2 = 1100V, 50Hz RMS
Max.
1800
1200
2400
480
5000
4.0
10
Parameter
Repetitive peak reverse voltage
Forward current (per arm)
Max. forward current
I2t value fuse current rating
Maximum power dissipation
Isolation voltage
Partial discharge
Test Conditions
Continuous dissipation -
junction to case
Mounting torque 5Nm
(with mounting grease)
-
-
Mounting - M6
Electrical connections - M8
Parameter
Thermal resistance - diode (per arm)
Thermal resistance - case to heatsink
(per module)
Junction temperature
Storage temperature range
Screw torque
THERMAL AND MECHANICAL RATINGS
Symbol
Rth(j-c)
Rth(c-h)
Tj
Tstg
-
Units
˚C/kW
˚C/kW
˚C
˚C
Nm
Nm
Max.
20
8
125
125
5
10
Typ.
-
-
-
-
-
-
Min.
-
-
-
–40
-
-
Internal insulation: AlN
Baseplate material: AlSiC
Creepage distance: 20mm
Clearance: 10mm
CTI (Critical Tracking Index): 175
3/7
www.dynexsemi.com
DFM1200FXM18-A000
Test Conditions
IF = 1200A,
dIF/dt = 8000A/µs,
VR = 900V
Parameter
Peak reverse recovery current
Reverse recovery charge
Reverse recovery energy
Symbol
Irr
Qrr
Erec
Units
A
µC
mJ
Max.
-
-
-
Typ.
880
320
240
Min.
-
-
-
DYNAMIC ELECTRICAL CHARACTERISTICS - PER ARM
Tvj = 25˚C unless stated otherwise.
Tvj = 125˚C unless stated otherwise.
Test Conditions
IF = 1200A,
dIF/dt = 8000A/µs,
VR = 900V
Parameter
Peak reverse recovery current
Reverse recovery charge
Reverse recovery energy
Symbol
Irr
Qrr
Erec
Units
A
µC
mJ
Max.
-
-
-
Typ.
1020
540
360
Min.
-
-
-
Test Conditions
VR = 1800V, Tvj = 125˚C
IF = 1200A
IF = 1200A, Tvj = 125˚C
-
Parameter
Peak reverse current
Forward voltage
Inductance
STATIC ELECTRICAL CHARACTERISTICS - PER ARM
Tvj = 25˚C unless stated otherwise.
Symbol
IRM
VF
L
Units
mA
V
V
nH
Max.
20
2.3
2.3
-
Typ.
-
2.0
2.0
20
Min.
-
-
-
-
STATIC ELECTRICAL CHARACTERISTICS
Tvj = 25˚C unless stated otherwise.
Test Conditions
-
Parameter
Module inductance
(externally connected in parallel)
Symbol
LM
Units
nH
Max.
-
Typ.
15
Min.
-
DFM1200FXM18-A000
4/7
www.dynexsemi.com
TYPICAL CHARACTERISTICS
Fig. 2 Diode typical forward characteristics Fig. 4 Transient thermal impedance
Fig. 5 Power dissipation Fig. 6 DC current rating vs case temperature
0
400
800
1200
1600
2000
2400
2800
3200
00.5 1.0 1.5 2.0 2.5 3.0 3.5
Foward volta
g
e, V
F
-
(
V
)
Foward current, I
F
- (A)
T
j
= 125˚C
T
j
= 25˚C
1
10
100
0.001 0.01 10.1 10
Pulse width, t
p
- (s)
Transient thermal impedance, Z
th (j-c)
- (°C/kW )
R
i (˚C/KW)
τi (ms)
1
0.8
0.0066332
2
2.7416
1.4384
3
3.4916
12.8758
4
12.9568
110.2138
0
2000
4000
6000
2000
3000
5000
0 20 40 60 80 100 120 140 160
Case temperature, T
case
- (˚C)
Power dissipation, P
tot
- (W)
0
200
400
600
800
1000
1200
1400
1600
1800
2000
0 20 40 60 80 100 120 140 160
Case temperature, T
case
- (˚C)
DC forward current, I
F
- (A)
5/7
www.dynexsemi.com
DFM1200FXM18-A000
Fig. 7 RBSOA
0
200
400
600
800
1000
1200
1400
1600
0 400 800 1200 1600 2000
Reverse voltage, V
R
- (V)
Reverse recovery current, I
rr
- (A)
T
j
= 125˚C
DFM1200FXM18-A000
6/7
www.dynexsemi.com
PACKAGE DETAILS
For further package information, please contact your local Customer Service Centre. All dimensions in mm, unless stated otherwise.
DO NOT SCALE.
140
31.5
4x M8
5
38
20
43.3 18
57 57
65 65
6x Ø7
15 15
13
2
4
62
62
Main Terminal screw plastic hole depth (M8) = 16.8 ± 0.3
Copper terminal thickness, main terminal pins = 1.5 ± 0.1
Nominal weight: 1050g
Module outline type code: F
7/7
www.dynexsemi.com
DFM1200FXM18-A000
POWER ASSEMBLY CAPABILITY
The Power Assembly group was set up to provide a support service for those customers requiring more than the basic
semiconductor, and has developed a flexible range of heatsink and clamping systems in line with advances in device voltages and
current capability of our semiconductors.
We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The
Assembly group continues to offer high quality engineering support dedicated to designing new units to satisfy the growing needs of
our customers.
Using the latest CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete
Solution (PACs).
HEATSINKS
The Power Assembly group has its own proprietary range of extruded aluminium heatsinks. They have been designed to optimise
the performance of Dynex semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is
available on request.
For further information on device clamps, heatsinks and assemblies, please contact your nearest sales representative or customer
service office.
CUSTOMER SERVICE CENTRES
Mainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33
North America Tel: 011-800-5554-5554. Fax: 011-800-5444-5444
UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020
SALES OFFICES
Mainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33
North America Tel: (613) 723-7035. Fax: (613) 723-1518. Toll Free: 1.888.33.DYNEX (39639) /
Tel: (949) 733-3005. Fax: (949) 733-2986.
UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020
These offices are supported by Representatives and Distributors in many countries world-wide.
© Dynex Semiconductor 2001 Publication No. DS5420-1 Issue No. 1.5 April 2001
TECHNICAL DOCUMENTATION NOT FOR RESALE. PRINTED IN UNITED KINGDOM
HEADQUARTERS OPERATIONS
DYNEX SEMICONDUCTOR LTD
Doddington Road, Lincoln.
Lincolnshire. LN6 3LF. United Kingdom.
Tel: 00-44-(0)1522-500500
Fax: 00-44-(0)1522-500550
DYNEX POWER INC.
99 Bank Street, Suite 410,
Ottawa, Ontario, Canada, K1P 6B9
Tel: 613.723.7035
Fax: 613.723.1518
Toll Free: 1.888.33.DYNEX (39639)
This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as
a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves
the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such
methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication
or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury
or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request.
All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.
http://www.dynexsemi.com
e-mail: power_solutions@dynexsemi.com
Datasheet Annotations:
Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:-
Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started.
Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change.
Advance Information: The product design is complete and final characterisation for volume production is well in hand.
No Annotation: The product parameters are fixed and the product is available to datasheet specification.