24 October 2013 Page 1 FEATURES 150W Constant Current Triple Output LEDWC-150T Series Ultra High Efficiency (Up to 91%) PF (Up to 0.99) IP67 p Triple Output Channels Lighting Protection Complies with UL8750 & EN61347 SPECIFICATIONS Model # Each Output Rated Current 350mA Input Output LEDWC150T035ST Rated Power Ripple & Noise Line Regulation Load Regulation StartUp Time Output Overshoot / Undershoot Voltage Range Frequency Range Inrush Current PF Efficiency Environmen Protections tal Temperature Humidity Safety & EMC Safety Standards Withstand Voltage 90V~305V AC 47Hz~63Hz 50A @ 230V AC Input and 25C 0.99@100V AC and 0.95@220V AC 88% min.@110V AC / 90% min.@220V AC Protection type: Hiccup mode, recovers automatically after fault condition is removed 110C Latch mode. The power supply shall return to normal operation only after the power supply has been recycled. 180V Typ. / 200V max. Protection type: latchoff mode, Power supply must be recycled. Operational 35C ~ 70C Storage 40C ~ 85C Operational 10~100%RH Storage 5~100%RH UL8750 compliance to UL1310 Class2 UL1012 UL935, CSAC22.2 (No.0, No 107.1 No.250.0) I/P - O/P: 3KVAC (4242 DC) I/P -FG: 1.5KVAC (2121 DC) O/PFG: 0.5KVAC (707 DC), 1 minute EN55015 with 6db margin Harmonic Current EN6100032, EN6100033 MTBF (3) Others 1.7A / 100V AC 0.8A / 220V AC EMI Conduction & Radiation EMS Immunity EN6100042, EN6100043, EN6100044, EN6100045, EN6100046, EN6100048, EN61000411 420K hours Compliance: MILHDBK217F @ 25C ambient temp. Life Time (4) 60,000 hours @ 45C ambient temp Dimensions (L*W*H) 188*88*39 mm 7.4*3.46*1.54 inches Weight www.autec.com Each Output Voltage Range 90V~142Vdc 10% When powered ON or OFF Short Circuit Over Voltage Each Output Max. Voltage 142 Vdc 150W 2% Vo Pk Pk 1% 3% 0.6 sec. measured at 110V AC AC Current (Typ) Over Temperature Each Output Current Range 332~368mA 1300g Autec Power Systems Tel: (805)522-0888 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 24 October 2013 Page 2 NOTE: 1. 2. 3. 4. 5. 6. 7. 8. Measured at full load, 220V AC input and 25C of ambient temperature. Ripple & Noise are measured at 20MHz of bandwidth oscilloscope and the output paralleled a 0.1F ceramic capacitor & 10F electrolytic capacitor. Measured at 110V AC input, 80% load and 25C of ambient temperature. Measured at 220V AC input, 80% load and 45C of ambient temperature. Measured at full load, 110VAC input, 25C ambient temperature, after the unit is thermally stabilized. It will be lower about 1%, if measured immediately after startup. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25C of ambient temperature. Specifications are subject to change without notice. AUTEC cannot be held liable for errors or omissions or the consequences thereof. A suffixXXXX may be added to denote variation or modifications to the base product, where X can be any alphanumeric character or blank. Mechanical Specification www.autec.com Autec Power Systems Tel: (805)522-0888 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777 24 October 2013 Page 3 PART NUMBER SCHEME LEDWC150T035ST T= Class I, 3 Wire Input LED= LED Driver S= Metal Case W= Wide Input Voltage 90~305V AC 035= Rated Current mA C= Constant Current T= Triple Output 150= Output Power (Watts) www.autec.com Autec Power Systems Tel: (805)522-0888 667 E Cochran St, Simi Valley, CA93065 Fax: (805)522-8777