THIS DOCUMENT IS THE PROPERTY OF KEYSTONE ELECTRONICS CORP. AND SHALL NOT BE REPRODUCED, DISTRIBUTED OR USED AS A BASIS FOR MANUFACTURE WITHOUT PRIOR WRITTEN PERMISSION FROM KEYSTONE ELECTRONICS CORP. MOUNTING PAD LAYOUT. REQUIRED SPACING FOR 'A' OR AA BATTERIES 2.05 [52.1] FOR AA BATTERY - 1.84 [46.74] FOR 'A' BATTERY .156 [3.96] MIN. 156 [3.96] MIN. \ 092 (2.34) [7/7] - 200 5.08 |__-_f77| LL 662 [16.81] MIN. _.| f +005 [+0.15] +005 [0.15] 9.047 [01.19] 9.092 oe \ : ] | : 544 [13.82] 200 [5.08] @ 5].092 r REF __| 405 [10.29] | ~_ REF ~<1 .250 [6.35] .050 [1.27] | 312 [7.92] +,015 [+0.38] +.015 [+0.38] 593 [15.06] ; ; ~ DIA. DIMPLE =| 369 [9.37] _ _ 156 [3.96] Z 156 [3.96] +,.015 [+0.38] NOTE: .662 [16.81] > 1. HEAT TREAT TO SPRING TEMPER. KEYSTONE ELECTRONICS CORP. www.keyelco.com e ASTORIA, N.Y. 11105-2017 @ Tel (718) 956-8900 PART NAME 'A' & 'AA' BATTERY HOLDER MATERIAL .012 [.30] TH'K ANNEALED SPRING STEEL FINISH DRN BY DATE MATTE TIN PLATE foes 10.20.09) CHANGE AS PER ECN 09-153 A _ | TOLERANCES : Now ca wi 1 CODE | DWG NO. DECIMAL . 25 DATE DESCRIPTION REV. ANGULAR ET SPECIFIED C 9 o 3