Snap Spade Terminals LISTED oD & 1. -800-800-0449 Snap Spade Terminals 22 to 10 Wire Range L MATERIAL: COPPER KRIMPTITE INSULKRIMP AVIKRIMP (PVC INSULATION) (NYLON INSULATION) Stud Max. Min. Max. Max. Max. Wire Size Width Clearance Part Length Part Length Part Length Range $ Ww c Number L Number L Number t 22 5 (3) 260 (6.6) 230 (5.8 AA-1704-05 585 (14.8) AA-2704-05X 810 (20,6) AA-8704-05 810 (20,8) 18 5-6 (3-35) | 260 (6.6) 230 (5, 3 AA-1704-06 585 (14,8) AA-2704-06X 810 (20,6) AA-8704-06 810 (20,6) 270 (6.8) 235 (6, " AA-1190-06 645 (16,4) AA-2190-06X 870 (22,1) AA-8190-06 870 (22,1) 03-1. Omm: |g (4) 300 (7.6) 235 (6,0 AA-1191-08 855 (16,6) AA-2191-08X 880 (22,4) AA-8191-08 880 (22,4) 320 (8.1) 261 (6, 5 AA-1714-08 846 (16,4) AA-2714-08X 871 (22,1) AA-B714-08 871 (22,1) 10(-) 338 (8.6) 235 (6, AA-1192-10 705 (17,9) AA-2192-10X 930 (23,8) AA-B192-10 930 (24,6) 340 (8.6) 261 (6.6 AA-1715-10 694 (17,6) AA-2715-10X 919 (23,3) AA-8715-10 919 (23,3) 16 5 (3) 260 (6.6) 230 (6.8) BB- 1707-05 585 (14,8) BB-2707-05X 810 (20,8) 8B-8707-05 825 (21,0) 14 5-6 (3-35) 260 (6.6) 230 (5.8) BB-1707-06 585 (14,8) BB-2707-06X 810 (20,6) BB-8707-06 825 (21,0) 270 (6.8) 235 (6.0) BB-1193-06 645 (16,4) BB-2193-06X 870 (22,1) 8B-8193-06 885 (22,5) 1.2-2.0mm | 3 (4) 300 (7.6) 235 (6.0) BB-1194-08 655 (16,6) BB-2194-08X 880 (22,4) BB-8194-08 895 (22,7) 320 (8.1) 261 (6,6) BB-1716-08 646 (16,4) BB-2716-08X 871 (22,1) 8B-8716-08 886 (22,5) 106) 338 (8.6) 235 (6,0) BB-1195-10 708 (17,9) BB-2195-10X 930 (23.6) BB-8195-10 945 (24,0) Pee 340 (8,6) 261 (6.6) BB-1717-10 694 (17,8) BB-2717-10X 919 (23,3) BB-8717-10 934 (23,7) 12 5.(3) 260 (6.6) 230 (5.8) - 864 (16,9) - 995 (24,3) C-8710-08 970 (24,6) 10 5-6 (3-3,5) | 260 (6.6) 230 (5.8) C-1710-06 664 (16,9) C-2710-06X 995 (24,3) C-8710-06 970 (24,8) 300 (7.6) 305 (7.8) C-1198-06 806 (20,5) C-2196-06X 1.097 (27,9) C-B196-06 4.412 (28.2) 3.0-6.0mm: |g (4) 330 (8.4) 305 (7.8) C-4197-08 834 (21,2) C-2197-08X 1.125 (28,5) C-8197-08 1.140 (29,0) 320 (8.1) 261 (6.6) - 725 (18,4) C-2718-08X 1.016 (25,7) C-8718-08 1.031 (26,2) 10(-) 330 (8.4) 305 (7.8) C-1198-10 854 (21,7) C-2198-10X 1.146 (29,1) C-8198-10 1.160 (29,5) 340 (8.6) 261 (6.6) C-1719-10 773 (196) C-2719-10X 1,064 (27,0) C-8719-10 1.079 (27,4) 1/4 (6) 425 (10,8) 375 (9.5) C-1199-14 980 (24,9) C-2199-14X 1.271 (32,3) 0-8199-14 1.286 (32.3) Product Specifications : Material | | Max. Wire insulation Dia. : Wire Barrel | Thickness | Insulation | | Circular Range Length Max. | Color Insulkrimp: Avikrimp Mil Area i t i 22- 18 AWG 175 (44); 0320.8) +, Red 145 (3,7). 140 @.6) | 500-2,600 16-14 AWG 175 (44) | 03208) | Blue | 175144): 1704.3) | 2.050-5,180 12-10 AWG 250 (6,4) | 040 (1.0} Yellow 250 (6,4) | 225 (5,7) | 5,180-13,100 Note: For Terminals on Mylar Tape, add T" at the end of ioose piece part number. CHECKING MACHINE CRIMPS FOR QUALITY Visual inspection of OPEN BARREL crlmps. Insulation Not DamagedBe sure that the conductor insulation has not been pierced or crushed by the crimp. Crimp the insulation just enough (may have a slight indentation to hold the wire in place). If the insulation has been pierced or crushed, the wires inside may have been damaged also. ACCEPT REJECT ~ * Insulation Insulation Slightly Pierced or Dented Crushed Insulation Support CrimpBe sure that the insulation barrel tabs are not bent. Form the tabs properly. If one of the tabs is bent, the insulation crimp will not be strong enough to provide the needed stress relief. ACCEPT REJECT Metal Insulation Insulation Tabs Formed- Tab Bent Wire is Held Snugly