NUMBER TYPE PRODUCT SPECIFICATION GS-12-673 TITLE PAGE REVISION 1 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY A DATE T.Ishishita 2010-10-14 CLASSIFICATION UNRESTRICTED 1. 1. Scope 1.27mm SATA 15P This specification defines the performance, requirements for the 1.27mm pitch SATA 15P Connector Power Cable Harness Series . 2. 2. Applicable standards 2.1 EIA 364 Electrical Connector/Socket Test Procedures Including Environmental Classifications 2.2 UL94 Tests for flammability of plastic materials for parts in devises and appliances. 3. 3. Material and plating Item name Parts name Housing Back cover 1.27mm SATA15P Contact 1.27mm pitch SATA15P Cable connector Over mold Conductor SATA SATA cable Insulation 2.5mm Housing 2.5mm pitch Wire/Board connector Contact Solder Material Finish etc. Note etc. () Heat resistant resin (Halogen free) UL94V-0 Black (UL94V-0) Copper alloy Contact area : Gold plating over nickel base plating Solder-tail area : Tin plating over nickel base plating UL94V-0 Black (UL94V-0) AWG : 22 Construction : 17/0.16mm Black, Yellow, Red UL94V-0 White (UL94V-0) Tin plating () Heat resistant resin (Halogen free) Tinned Annealed Stranded Copper () Heat resistant resin (Halogen free) () Heat resistant resin (Halogen free) Copper alloy Sn96.5-Ag3.0-Cu0.5 () (Lead free) This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE PRODUCT SPECIFICATION GS-12-673 TITLE PAGE REVISION 2 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY A DATE T.Ishishita 2010-10-14 CLASSIFICATION UNRESTRICTED Taping (-) Heat resistant resin (None-Halogen free) Black 4. SATA 2.5mm pitch 4. Specifications of SATA cable, 2.5mm pitch Wire/Board connector and solder. Item name SATA SATA cable 2.5mm 2.5mm pitch Wire/Board connector Solder Taping Specifications See individual specifications See individual specifications See individual specifications See individual specifications 5. 5. Design and Construction 1.27mm SATA15P 1.27mm SATA15P EIA 364-18 5.1 : 1.27mm SATA15P 1.27mm SATA15P The 1.27mm pitch SATA15P Cable connector shall be mated with the 1.27mm pitch SATA15P plug connectors. Visual examination of 1.27mm pitch SATA15P Cable connector shall be done per EIA 364-18. 5.1 Mating :The 1.27mm pitch SATA15P Cable connector shall be capable of mating and unmating manually without the use of special tools. This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE GS-12-673 PRODUCT SPECIFICATION TITLE PAGE REVISION 3 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY T.Ishishita A DATE 2010-10-14 CLASSIFICATION UNRESTRICTED 6. 6. RATING Rating Value Voltage Rating Current Rating 300V (AC/DC) 1.5A (AC/DC) Operating temperature range -20 to +85 () Including temperature rises according to the current flows. Storage temperature range -40 to +85 7. 7. PARFORMANCE 9 4 1 1535 2080. 650mmHg800mmHg(86kpa106kpa) Unless otherwise specified, when tested the ambient conditions as described below and evaluated with the sequence listed in Table 4, the connector shall meet the requirements listed in Table 1 and 2, 3. Temperature: 15 to 35 Relative humidity: 25% to 80. Atmospheric pressure: 650mmHg to 800mmHg (86kpa to 106kpa) This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE GS-12-673 PRODUCT SPECIFICATION TITLE PAGE REVISION 4 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY A DATE T.Ishishita 2010-10-14 CLASSIFICATION UNRESTRICTED Para. Electrical requirements Low level contact resistance(LLCR) Insulation resistance Dielectric withstanding voltage Contact current rating (Power segment) 1 Table1. Electrical requirements Requirements 40m (SATA 30m+SATA SATA 5m+SATA 100mm 5m 20m (SATA 15m+SATA SATA +SATA 100mm 5m Initial:40mMax (Initial 40m is total value of SATA connector:30mmax, joint area between SATA connector and SATA cable:5m max and SATA cable less than 100mm length:5mmax). Final:20mMax (Final 20m is total value of SATA connector:15mmax, joint area between SATA connector and SATA cable, SATA cable less than 100mm length:5mmax). <SATA )> 500M 500M <SATA > 1000M 1000M <Increasing SATA connector, joint area between SATA connector and SATA cable > Initial:500MMin. Final:500MMin. <SATA connector only> Initial:1000MMin. Final:1000MMin. 0.5mA No evidence of arc-over or insulation breakdown. (Current leakage: 0.5mA Max.) 3025 The temperature rise:30 max.(The ambient condition is still air at 25) Condition 8.1 8.2 8.3 8.4 This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE GS-12-673 PRODUCT SPECIFICATION TITLE PAGE REVISION 5 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY T.Ishishita A DATE 2010-10-14 CLASSIFICATION UNRESTRICTED Para. Mechanical requirements Cable pull-out 2 Table2. Mechanical requirements Requirements Condition No physical damage. 8.5 Cable flexing 1us No physical damage. No discontinuity over 1 us during the test. 8.6 Insertion force 45N 45N Max 8.7 Removal force 15N 15 10N 550 15N Min (for cycles 1 through 5) 10N Min (through 50 cycles) 8.8 No physical damage. There shall meet the specification of contact resistance before and after the test. 8.9 Durability 3 This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE GS-12-673 PRODUCT SPECIFICATION TITLE PAGE REVISION 6 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY T.Ishishita A DATE 2010-10-14 CLASSIFICATION UNRESTRICTED Para. Table3. Environmental requirements Requirements Condition 1us No physical damage. No discontinuity over 1us during the test. 8.10 Random vibration 1us No discontinuity over 1 us during the test. 8.11 Humidity 1 See NOTE 1. 8.12 Temperature life 1 See NOTE 1. 8.13 Thermal shock 1 See NOTE 1. 8.14 Mixed flowing Gas 1 See NOTE 1. 8.15 Environmental requirements Physical shock NOTE 1EIA 364-18 7. 1Shall meet EIA 364-18 Visual Examination requirements, show no physical damage, and shall meet requirements of additional tests as specified in the test sequence in section 7.0 8. This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE GS-12-673 PRODUCT SPECIFICATION TITLE PAGE REVISION 7 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY T.Ishishita A DATE 2010-10-14 CLASSIFICATION UNRESTRICTED 8. Test method 8.1 1 SATA SATA 100A 20V EIA 364-23 SATA SATA SATA 100mm 8.1 Low level contact resistance (LLCR) Measuring under the following conditions : (EIA 364-23) The measuring data is included the conductor resistance of joint area between SATA Cable connector and SATA cable, SATA cable less than 100mm length. Method of connection: See Fig 1. The following details shall apply: (a) Test current : 100 mA Max (b) Open circuit voltage : 20 mV Max 1. Fig.1 Contact resistance measuring method 8.2 SATA SATA DC 500V 1 EIA 364-21 8.2 Insulation resistance Measuring under the following conditions : (EIA 364-21) The measuring condition is unmated SATA Cable connector or SATA connector to SATA plug. The following details shall apply: (a) Test Voltage : 500 V DC for 1 minute (b) Points of Measurement : Between adjacent contact 8.3 SATA SATA AC 500V 1 EIA 364-20 Method B 8.3 Dielectric Withstanding Voltage Measuring under the following conditions : (EIA 364-20 Method B) The measuring condition is unmated SATA Cable connector or SATA connector to SATA plug. The following details shall apply: (a) Test Voltage : 500V AC for 1 minute (b) Points of Measurement : Between adjacent contact 8.4 SATA This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE GS-12-673 PRODUCT SPECIFICATION TITLE PAGE REVISION 8 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY T.Ishishita A DATE 2010-10-14 CLASSIFICATION UNRESTRICTED P1,P2,P8,P9 P4, P5, P6, P10, P12 6A DC 1.5A/ 8.4 Contact current rating(Power segment) Measuring under the following conditions: Mount the SATA plug connector to a test PCB. Wire power pins P1, P2, P8, and P9 in parallel for power. Wire ground pins P4, P5, P6, P10, and P12 in parallel for return. Supply 6A total DC current to the power pins in parallel, returning from the parallel ground pins. Record temperature rise when contact equilibrium is reached. 8.5 SATA 2 SATA 40N 1 EIA 364-38 Condition A 8.5 Cable pull-out Measuring under the following conditions : (EIA 364-38 Condition A) A test axial load 40N is subjected to the SATA cable for 1minute. Cable pull-out direction: See Fig 2. The following details shall apply: (a) Test axial load : 40N for 1minute 2. Fig.2 Cable pull-out direction 8.6 SATA SATA EIA 364-41 Condition I (a) 90 (b) 100 180 8.6 Cable flexing Measuring under the following conditions : (EIA 364-41 Condition I) The measuring condition is mated SATA Cable connector to SATA plug. The following details shall apply: (a) Rotate direction : A transverse of 180 in one direction plus 180 in the opposite direction shall call one cycle. (b) Duration : 100 cycles. 8.7 SATA SATA This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE GS-12-673 PRODUCT SPECIFICATION TITLE PAGE REVISION 9 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY T.Ishishita A DATE 2010-10-14 CLASSIFICATION UNRESTRICTED 12.5mm / min EIA 364-13 8.7 Insertion force Measuring under the following conditions : (EIA 364-13) When SATA Cable connector is inserted to SATA plug, insertion forces shall conform to the following details. (a) Insertion speed : 12.5mm / minute 8.8 SATA SATA 12.5mm / min EIA 364-13 8.8 Removal force Measuring under the following conditions : (EIA 364-13) When SATA Cable connector is removed from SATA plug, removal forces shall conform to the following details. (a) Removal speed : 12.5mm / minute 8.9 200cycles/hour 50 EIA 364-09 8.9 Durability Measuring under the following conditions : (EIA 364-09) The measuring condition is mated and unmated SATA Cable connector to SATA plug. The following details shall apply: (a) Test speed : 200 cycles / hour (b) cycles : 50 cycles 8.10 SATA SATA (EIA 364-27 Condition H ) (a) : 294 m/s2 (30G), 11ms, (b) : 3 6 ( 18 ) 8.10 Physical shock Measuring under the following conditions : (EIA 364-27 Condition H) The measuring condition is mated SATA Cable connector to SATA plug. The following details shall apply: (a) Test condition : 294 m/s2 (30G), 11ms, half-sine (b) Number of shock : 6 shocks along each of three perpendicular axes 18 total 8.11 SATA SATA This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE GS-12-673 PRODUCT SPECIFICATION TITLE PAGE REVISION 10 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY T.Ishishita A DATE 2010-10-14 CLASSIFICATION UNRESTRICTED (EIA 364-28 Test Condition V Test letter A ) (a) : 502000 Hz (b) : XYZ 0.5 ( 1.5 ) (c) : 0.02G2/Hz 8.11 Random Vibration Measuring under the following conditions : (EIA 364-28 Test Condition V Test letter A) The measuring condition is mated SATA Cable connector to SATA plug. The following details shall apply: (a) Frequency range : Random 502000 Hz, 5.35 g's RMS overall (b) Duration : 0.5 hours for each of three perpendicular axes (Total 1.5 hours) (c) Power Spectral Density : 0.02G2/Hz 8.12 SATA SATA 21 (EIA364-31 Method Test Condition A ) (a) : 40 2 (b) : 9095% R.H. (c) : 96 8.12 Humidity Measuring under the following conditions : (EIA364-31 Method Test Condition A) The measuring condition is mated SATA Cable connector to SATA plug. After left connectors for 2 +/-1 hours, there shall be measurement. The following details shall apply: (a) Ambient temperature : 40 2 (b) Relative Humidity : 9095% R.H. (c) Test times : 96 hours 8.13 SATA SATA 21 (EIA364-17 Test Condition Method A ) (a) : 85 2 (b) : 500 8.13 Temperature life Measuring under the following conditions : (EIA364-17 Test Condition Method A) The measuring condition is mated SATA Cable connector to SATA plug. After left connectors for 2 +/-1 hours, there shall be measurement. The following details shall apply: (a) Ambient temperature : 85 2 (c) Test times : 500 hours 8.14 SATA SATA 3 21 This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE GS-12-673 PRODUCT SPECIFICATION TITLE PAGE REVISION 11 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY T.Ishishita A DATE 2010-10-14 CLASSIFICATION UNRESTRICTED (EIA364-32, Test Condition) (a) : - 55 30 85 30 (b) : 10 8.14 Thermal Shock Measuring under the following conditions : (EIA364-17 Test Condition Method A) The measuring condition is mated SATA Cable connector to SATA plug. After left connectors for 2 +/-1 hours, there shall be measurement. Method of 1 cycle: See Fig 3. The following details shall apply: (a) Temperature : 30 min to -55,30 min to +85 (b) Cycle : 10 cycles 85 Room -55 30min. 30min. Cycle 3. 1 Fig.3 Method of 1 cycle 8.15 SATA SATA SATA SATA 21 (EIA 364-65, Class 2A) (a) : 30 2 (b) : 70 2% R.H. (c) : Cl2 103ppb, NO2 20050ppb, H2S 105ppb, SO2 10020ppb 8.15 Mixed flowing Gas Measuring under the following conditions : (EIA 364-65, Class 2A) Half of the samples are exposed unmated for seven days, then mated for remaining seven days. Other half of the samples are mated during entire testing. The measuring condition is mated SATA Cable connector to SATA plug. After left connectors for 2 +/-1 hours, there shall be measurement. The following details shall apply: (a) Ambient temperature : 30 2 (b) Relative Humidity : 70 2% R.H (c) Gas Concentration : Cl2 103ppb, NO2 20050ppb, H2S 105ppb, SO2 10020ppb 9. 9. Test sequence This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE GS-12-673 PRODUCT SPECIFICATION TITLE PAGE REVISION 12 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY T.Ishishita A DATE 2010-10-14 CLASSIFICATION UNRESTRICTED 4 Test sequence is shown in Table 4. 4. Table 4. Test sequence Test group Test item A B C D E 1 Examination of the connector(s) 2 Low level contact resistance(LLCR) 3 Insulation resistance 4 Dielectric withstanding voltage 5 Contact current rating(Power segment) 6 Insertion force 7 Removal force 8 (*) (*) Durability 9 Physical shock 10 Random vibration 11 Humidity 12 Temperature life (3 ) 13 Reseating(manually unplug/plug three times) 14 Thermal shock 15 Mixed flowing Gas NOTE (*) 200cycles/hour 20 (*) Preconditioning, 20 cycles for the 50-durability cycle requirement. The insertion and removal cycle is at the maximum rate of 200 cycles per hour. Test Method 8.1 8.2 8.3 8.4 8.7 8.8 8.9 8.10 8.11 8.12 8.13 8.14 8.15 10. This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 NUMBER TYPE GS-12-673 PRODUCT SPECIFICATION TITLE PAGE REVISION 13 of 13 1.27 SATA 15P 1.27mm pitch SATA 15P Connector Power Cable Harness Series AUTHORIZED BY A DATE T.Ishishita 2010-10-14 CLASSIFICATION UNRESTRICTED 10. Notice REVISION RECORD REV PAGE REVISION ECR# DATE A ALL RELEASED J10-0210 2010-10-14 This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in any way without the written consent of FCI Electronics. Form E-3005 Rev A 02/12/01 V20603 GS-01-001 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: FCI / Amphenol: 10111728-15S300HLF 10103791-15S064HLF