NUMBER GS-12-673 TYPE
製 品 規 格
PRODUCT SPECIFICATION
TITLE PAGE REVISION
8 of 13 A
AUTHORIZED BY DATE
1.27mmピッチ SATA 15P 電源 ケーブル コネクタ ハーネス シリーズ
1.27mm pitch SATA 15P Connector Power Cable Harness Series T.Ishishita 2010-10-14
CLASSIFICATION
UNRESTRICTED
This document is the property of and embodies CONFIDENTIAL and PROPRIETARY information of FCI Electronics. No part of the information shown on this document may be used in
any way without the written consent of FCI Electronics.
Form E-3005
Rev A 02/12/01
V20603
GS-01-001
電源用ピンとして、P1,P2,P8,P9 を並列に接続する。
グランド用ピンとして、P4, P5, P6, P10, P12 を並列に接続する。
全体で 6AのDC 電流値(1.5A/ピン)を電源用ピンから入力し、グランド用ピンから出力する。
熱平衡に達した時の温度上昇値を測定する。
8.4 Contact current rating(Power segment)
Measuring under the following conditions:
Mount the SATA plug connector to a test PCB.
Wire power pins P1, P2, P8, and P9 in parallel for power.
Wire ground pins P4, P5, P6, P10, and P12 in parallel for return.
Supply 6A total DC current to the power pins in parallel, returning from the parallel ground pins.
Record temperature rise when contact equilibrium is reached.
8.5 ケーブル引張り
SATA ケーブルコネクタ単体(未嵌合の状態)にて、図 2に示すように、SATA ケーブルに、40N の負荷を 1分間印
加する。(EIA 364-38 Condition A 準拠)
8.5 Cable pull-out
Measuring under the following conditions : (EIA 364-38 Condition A)
A test axial load 40N is subjected to the SATA cable for 1minute.
Cable pull-out direction: See Fig 2.
The following details shall apply:
(a) Test axial load : 40N for 1minute
図2. ケーブル引っ張り方向
Fig.2 Cable pull-out direction
8.6 ケーブル屈曲
SATA ケーブルコネクタを SATA プラグへ挿入した状態で、以下曲げ方向、屈曲回数にて測定する。
(EIA 364-41 Condition I 準拠)
(a) 曲げ方向:コネクタとケーブルのクランプ部近傍を左右方向へ各 90 度曲げる。
(b) 屈曲回数:100 サイクル(180 度の往復を1サイクルとする。)
8.6 Cable flexing
Measuring under the following conditions : (EIA 364-41 Condition I)
The measuring condition is mated SATA Cable connector to SATA plug.
The following details shall apply:
(a) Rotate direction : A transverse of 180 °in one direction plus 180 °in the opposite direction shall
call one cycle.
(b) Duration : 100 cycles.
8.7 挿入力
SATA ケーブルコネクタを SATA プラグへ挿入し、嵌合が完了するまでの最大荷重を測定する。