The TDA 6130-5X4 is a symmetrical mixer like the components S 042 P* and TBB 042 G* but for
frequencies up to 2 GHz. It can be driven by an external source or by the build-in oscillator.
* already cancelled
Type Ordering Code Package
TDA 6130-5X4 Q67000-A5176 P-DSO-14-1
2-GHz Mixer
Preliminary Data Bipolar IC
TDA 6130-5X4
P-DSO-14-1
Features
A wide range of supply voltage
Few external components
High conversion transconductance
Wide range of input signal.
Semiconductor Group 76 08.93
Semiconductor Group 77
Pin Configuration
(top view)
Pin Definitions and Functions
Pin No. Symbol Function
1 N.C. N.C.
2 MIXO Mixer output
3MIXO Mixer output
4VSSupply voltage
5 N.C. N.C.
6 OSCIOscillator input
7 OSCIOscillator input
8 N.C. N.C.
9 MIXE Mixer input emitter
10 MIXB Mixer input base
11 MIXE Mixer input emitter
12 MIXB Mixer input base
13 N.C. N.C.
14 GND Ground
P-DSO-14
TDA 6130-5X4
Semiconductor Group 78
TDA 6130-5X4
Block Diagram
Semiconductor Group 79
Circuit Description
The pins 1, 5, 8, 13 should be connected to pin 14 (ground) to reach optimal HF features. A galvanic
connection between pins 6 and 7 and 10 and 12 through coupling windings is recommended.
A resistor of at least 220 may be connected between pins 9 and 14 (ground) and between 11 and
14 to increase the currents and thus the conversion transconductance.
Pins 9 and 11 may be connected through any impedance. In case of a direct connection between
pin 9 and 11, the resistance from this pin to 14 may be at least 100 . Depending on the layout, a
capacitor may be required between pins 6 and 7 to prevent oscillations in the UHF band.
TDA 6130-5X4
Semiconductor Group 80
TDA 6130-5X4
Absolute Maximum Ratings
TA = 0 to 70 °C
Parameter Symbol Limit Values Unit Test Condition
min. max.
Supply voltage V408V
Mixer output V2, 3 1 8 V Open collector
Oscillator input V6, 7 0 2.5 V
Mixer input emitter V9, 11 0.8 3.5
Mixer input base V10, 12 0V4 – 1.5 V
Junction temperature Tj125 °C
Storage temperature Tstg 40 150 °C
Thermal resistance Rth SA 125 K/W
Operating Range
Supply voltage VS47V
Input frequency range f15 2000 MHz
Ambient temperature
in operation TA070°C
Semiconductor Group 81
Characteristics
TA = 25 °C; VS = 6 V ± 10 % (test circuit 1)
Parameter Symbol Limit Values Unit Test
Condition
min. typ. max.
Current consumption IS = I2 + I3 + I41.1 1.6 2.1 mA
Output-current I2 = I30.35 0.54 0.75 mA
Output-current difference I2 I331060µA
Supply current I40.2 0.4 0.6 mA
Power gain
fe = 100 MHz, fOSC = 110,7 MHz
fe = 1 GHz, fOSC = 1,1 GHz
VP13
13 16
16 19
19 dB
dB
Break down voltage
I2, 3 = 10 mA; V6, 7 = 0 V2, 3 18 V
Noise figure NF 6710dBDSB
Mixer output impedance R
C7.0
0.6
1.5
k
k
pF
fMO = 100 MHz
fMO = 1 GHz
TDA 6130-5X4
Semiconductor Group 82
TDA 6130-5X4
Test Circuit 1
Semiconductor Group 83
Application Circuit
TDA 6130-5X4