ETHERNET-TO-FIBRE MEDIA CONVERTER Patent P Technoending logy Ethernet Media Converter The LEMO Ethernet to fibre media converter has been designed to ensure reliable conversion in harsh environments. A pair of media converters enables the conversion of signal from Ethernet 100 BaseT copper networks to fibre optics and vice-versa. Using the converter allows the Ethernet signal to be transmitted over a long distance without loss of quality. The advantages are immunity to electromagnetic interference and increased security for sensitive information. Advantages * single mode fibre * cable o 2.6 to 10.5 mm * high shock and vibration resistance * watertight IP 68 * reliable and secure, difficult to tap into the signal * easy to deploy and operate * LED indicators TX / RX / Power Applications * traffic light signals / smoke and fire alert * remote surveillance / video security * military and industrial environment Technical characteristics Environmental characteristics Characteristics Values Characteristics Values Transmission Wavelength Fibre type Electrical Inputs LD Optical Output Power Photodiode Sensitivity Data Rate Transmission Distance 1310 nm Singlemode 9/125 m 10/100 BaseT Ethernet, 5V supply (280mA max.) 200 W (250 W max.) -37 to -5 dBm 125 Mbps (max.) over 20km Protection Index Temperature Range / Humidity Solar Heating Salt Spray Blowing Sand Shock / High Altitude Fluid Resistance IP68 (when mated) -20C to +85C / 85% rH at +45C 1120 W/m2 (max) at +49C 5% Saline Solution for 48 hours 0.75 g/m3 for 1.5 hours up to 40 g / 4.572 m Fog Oil, Diesel, Aviation fuel (JP-8) Compliant to MIL-STD 416E (CE102, CS101, CS114, RE102 and RS103) Electromagnetic Compliance FGG Ethernet converter with fibre optic plug and 1K series socket Mating connector optical side Mating connector electrical side PHG.3K.03A.CLZT**Z FGL.1K.306.CLLC**Z Part number 103 FGG.ME.3KA.CP1K06 o 29 Note : replace ** by the cable diameter required (consult factory). Available in different colours. PHG Ethernet converter with fibre optic socket and 1K series socket Mating connector optical side Mating connector electrical side FGG.3K.03A.CLZT**Z FGL.1K.306.CLLC**Z Part number 107 PHG.ME.3KA.CP1K06 o 29 Note : replace ** by the cable diameter required (consult factory). Available in different colours. Note : Model FGG.ME.3KA.CCZC**Z and model PHG.ME.3KA.CCZC**Z are available on request. These models include a cable tail (cable assembly). Recommended cable: L45467-J616-W26 or CMU.07.060.080MB. Please consult LEMO for further details. Video surveillance camera Security control room FGG.ME.3KA PHG.3K.03A Fibre optic signal for long distance FGG.3K.03A PHG.ME.3KA CFO.02.912.555.MB FGL.1K.306.CLLCZ FGL.1K.306.CLLCZ LEMO HEADQUARTERS SWITZERLAND LEMO SA Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com www.lemo.com (c) CAT.CE.LEN.P0806 CHF 1.50 / EURO 1 / USD 1.1 / RMB 10 Data subject to change, printed in Switzerland, August 2006 Updated, April 2012