ETHERNET-TO-FIBRE
MEDIA CONVERTER
The LEMO Ethernet to fibre media
converter has been designed to ensure
reliable conversion in harsh environments.
A pair of media converters enables
the conversion of signal from Ethernet 100
BaseT copper networks to fibre optics
and vice-versa.
Using the converter allows the Ethernet
signal to be transmitted over a long distance
without loss of quality.
The advantages are immunity to elec tro -
magnetic interference and increased security
for sensitive information.
Advantages
• single mode fibre
• cable ø 2.6 to 10.5 mm
• high shock and vibration resistance
• watertight IP 68
• reliable and secure, difficult to tap
into the signal
• easy to deploy and operate
• LED indicators TX / RX / Power
Applications
• traffic light signals / smoke and fire alert
• remote surveillance / video security
• military and industrial environment
Patent Pending
Technology
Ethernet Media Converter
© CAT.CE.LEN.P0806 CHF 1.50 / EURO 1 / USD 1.1 / RMB 10 Data subject to change, printed in Switzerland, August 2006
Updated, April 2012
www.lemo.com
LEMO HEADQUARTERS
SWITZERLAND
LEMO SA
Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens
Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com
Fibre optic
signal for long distance
PHG.3K.03A
CFO.02.912.555.MB
FGG.3K.03A
FGL.1K.306.CLLCZFGL.1K.306.CLLCZ
PHG.ME.3KAFGG.ME.3KA
Video surveillance
camera
Security control room
Part number
PHG.ME.3KA.CP1K06
PHG Ethernet converter with fibre optic socket
and 1K series socket
107
ø 29
Technical characteristics
Transmission Wavelength 1310 nm
Fibre type Singlemode 9/125 µm
Electrical Inputs 10/100 BaseT Ethernet, 5V supply (280mA max.)
LD Optical Output Power 200 µW (250 µW max.)
Photodiode Sensitivity -37 to -5 dBm
Data Rate 125 Mbps (max.)
Transmission Distance over 20km
Characteristics Values
Environmental characteristics
Protection Index IP68 (when mated)
Temperature Range / Humidity -20°C to +85°C / 85% rH at +45°C
Solar Heating 1120 W/m2(max) at +49°C
Salt Spray 5% Saline Solution for 48 hours
Blowing Sand 0.75 g/m3for 1.5 hours
Shock / High Altitude up to 40 g / 4.572 m
Fluid Resistance Fog Oil, Diesel, Aviation fuel (JP-8)
Compliant to MIL-STD 416E
(CE102, CS101, CS114, RE102 and RS103)
Characteristics Values
Electromagnetic Compliance
Note: replace •• by the cable diameter required (consult factory).
Available in different colours.
Mating connector Mating connector
optical side electrical side
PHG.3K.03A.CLZT••Z FGL.1K.306.CLLC••Z
Part number
FGG.ME.3KA.CP1K06
FGG Ethernet converter with fibre optic plug
and 1K series socket
103
ø 29
Note: replace •• by the cable diameter required (consult factory).
Available in different colours.
Mating connector Mating connector
optical side electrical side
FGG.3K.03A.CLZT••Z FGL.1K.306.CLLC••Z
Note:
Model FGG.ME.3KA.CCZC••Z and model PHG.ME.3KA.CCZC••Z are available on request.
These models include a cable tail (cable assembly). Recommended cable: L45467-J616-W26 or CMU.07.060.080MB.
Please consult LEMO for further details.
