1998 Jan 29 450
Philips Components Product specification
Aluminium electrolytic capacitors
Power Ultra Miniature Snap-in 157 PUM-SI
FEATURES
Polarized aluminium electrolytic
capacitors, non-solid
Large types, very small
dimensions, cylindrical aluminium
case, insulated with a blue sleeve
Pressure relief on the top of the
aluminium case
Charge and discharge proof
Useful life: 2500 hours at 85 °C.
APPLICATIONS
General purpose, industrial and
audio/video systems
Smoothing and filtering
Standard and switched mode
power supplies
Energy storage in pulse systems.
Fig.1 Component outlines.
d
book, 4 columns
CCA401
handbook, halfpage
CCA483
057
PSM-SI 157
PUM-SI
smaller
dimensions
QUICK REFERENCE DATA
DESCRIPTION VALUE
Case size (Dnom ×Lnom in mm) 22 ×25 to 35 ×50
Rated capacitance range (E6/E12 series), CR56 to 2200 µF
Tolerance on CR±20%
Rated voltage range, UR200 V, 250 V, 400 V, 450 V
Category temperature range 25 to +85 °C
Endurance test at 85 °C 2000 hours
Load life at 85 °C 2000 hours
Useful life at 85 °C 2500 hours
Useful life at 40 °C and 1.4 ×IR applied 45000 hours
Shelf life at 0 V, 85 °C 1000 hours
Based on sectional specification IEC 384-4-1/CECC 30300
Climatic category IEC 68 25/085/56
1998 Jan 29 451
Philips Components Product specification
Aluminium electrolytic capacitors
Power Ultra Miniature Snap-in 157 PUM-SI
L
Selection chart for CR, UR and relevant nominal case sizes (D×L in mm); preferred types in bold
CR
(µF) UR (V)
200 250 400 450
56 −−−22 ×25
68 −−22 ×25 22 ×30
82 −−22 ×25 22 ×30
−−−25 ×25
100 −−22 ×30 22 ×35
−−−25 ×30
120 −−22 ×30 22 ×40
−−−25 ×30
−−−30 ×25
150 −−22 ×35 25 ×35
−−25 ×30 25 ×40
−−−30 ×30
180 −−22 ×40 25 ×40
−−25 ×35 30 ×35
−−−35 ×25
220 22 ×30 25 ×40 25 ×50
−−30 ×30 30 ×40
−−35 ×25 35 ×30
270 22 ×25 22 ×30 25 ×45 30 ×45
25 ×25 30 ×35 35 ×35
−−35 ×30
330 22 ×30 22 ×35 30 ×40 30 ×50
25 ×30 35 ×30 35 ×40
390 22 ×30 22 ×40 30 ×45 35 ×45
30 ×25 35 ×35
470 22 ×35 25 ×35 30 ×50 35 ×50
25 ×30 30 ×30 35 ×40
560 22 ×40 25 ×40 35 ×45
25 ×35 30 ×30 −−
30 ×25 35 ×25 −−
680 25 ×40 25 ×45 35 ×50
30 ×30 30 ×35 −−
35 ×25 35 ×30 −−
820 25 ×45 30 ×40 −−
30 ×35 35 ×35 −−
35 ×30 −−−
1000 30 ×40 30 ×45 −−
35 ×30 35 ×40 −−
1200 30 ×45 35 ×45 −−
35 ×35 −−−
1500 30 ×50 35 ×50 −−
35 ×40 −−−
1800 35 ×45 −−−
2200 35 ×50 −−−
1998 Jan 29 452
Philips Components Product specification
Aluminium electrolytic capacitors
Power Ultra Miniature Snap-in 157 PUM-SI
MARKING
The capacitors are marked (where possible) with the following information:
Rated capacitance (in µF)
Tolerance code on rated capacitance (M for ±20%)
Rated voltage (in V)
Climatic category in accordance with
“IEC 68”
Date code (year and week) in accordance with
“IEC 62”
Code for factory of origin
Name of manufacturer
’ sign to indicate the negative terminal, visible from the top and side of the capacitor
Code number (last 8 digits)
Code for basic specification in accordance with
“IEC 384-4-1”
and
“CECC 30301”
.
1998 Jan 29 453
Philips Components Product specification
Aluminium electrolytic capacitors
Power Ultra Miniature Snap-in 157 PUM-SI
L
MECHANICAL DATA AND PACKAGING QUANTITIES
Fig.2 Snap-in.
Dimensions in mm.
For dimensions see Table 1.
The minus terminal can be marked with a black dot or with an imprinted ‘ sign.
handbook, 4 columns
+ TERMINAL
TERMINAL
CCA994
D
L + 2 max.L
5.8 0
1
Bottom view
Fig.3 Mounting hole diagram.
Dimensions in mm.
handbook, 2 columns
CCA995
10
±0.1
2 ±0.1 (2×)
Table 1 Physical dimensions, mass and packaging information; see Fig.2
NOMINAL
CASE SIZE
D×L
(mm)
CASE
CODE Dmax
(mm) Lmax
(mm) MASS
(g) PACKAGING QUANTITIES
(units per box)
CARDBOARD BOX
DIMENSIONS
l×w×h
(mm)
22 ×25 2225 23 27 12 100 260 ×250 ×39
22 ×30 2230 23 32 16 100 260 ×250 ×44
22 ×35 2235 23 37 20 100 260 ×250 ×49
22 ×40 2240 23 42 23 100 260 ×250 ×54
25 ×25 2525 26 27 20 100 290 ×280 ×39
25 ×30 2530 26 32 22 100 290 ×280 ×44
25 ×35 2535 26 37 24 100 290 ×280 ×49
25 ×40 2540 26 42 27 100 290 ×280 ×54
25 ×45 2545 26 47 32 100 290 ×280 ×59
25 ×50 2550 26 52 38 100 290 ×280 ×64
30 ×25 3025 31 27 25 100 340 ×330 ×39
30 ×30 3030 31 32 30 100 340 ×330 ×44
30 ×35 3035 31 37 35 100 340 ×330 ×49
30 ×40 3040 31 42 40 100 340 ×330 ×54
30 ×45 3045 31 47 45 100 340 ×330 ×59
30 ×50 3050 31 52 50 100 340 ×330 ×64
35 ×25 3525 36 27 33 50 390 ×198 ×39
35 ×30 3530 36 32 40 50 390 ×198 ×44
35 ×35 3535 36 37 48 50 390 ×198 ×49
35 ×40 3540 36 42 55 50 390 ×198 ×54
35 ×45 3545 36 47 63 50 390 ×198 ×59
35 ×50 3550 36 52 72 50 390 ×198 ×64
1998 Jan 29 454
Philips Components Product specification
Aluminium electrolytic capacitors
Power Ultra Miniature Snap-in 157 PUM-SI
ELECTRICAL DATA AND ORDERING INFORMATION
Unless otherwise specified, all electrical values in Table 2 apply at
Tamb =20°C, P = 86 to 106 kPa, RH = 45 to 75%.
Note
1. ESR at 120 Hz is approximately 0.95 ×ESR 100 Hz.
SYMBOL DESCRIPTION
CRrated capacitance at 100/120 Hz
IRrated RMS ripple current at 120 Hz, 85 °C
IL5 max. leakage current after 5 minutes at UR
ESR typ. equivalent series resistance at 100 Hz; note 1
Z max. impedance at 10 kHz
Ordering example
Electrolytic capacitor 157 series
1000 µF/200 V; ±20%
Nominal case size: 30 ×40 mm
Catalogue number: 2222 157 52102.
Table 2 Electrical data and ordering information; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
D×L
(mm)
CASE
CODE
IR
120 Hz
85 °C
(A)
IL5
5 min
(mA)
TYP. ESR
100 Hz(1)
(m)
Z
10 kHz
(m)
CATALOGUE
NUMBER
2222 ... .....
200 270 22 ×25 2225 1.15 0.54 280 700 157 52271
330 22 ×30 2230 1.36 0.66 260 500 157 52331
390 22 ×30 2230 1.46 0.78 230 490 157 52391
470 22 ×35 2235 1.68 0.94 190 400 157 32471
25 ×30 2530 1.67 0.94 200 400 157 52471
560 22 ×40 2240 1.91 1.12 190 390 157 42561
25 ×35 2535 1.91 1.12 160 390 157 32561
30 ×25 3025 1.89 1.12 160 390 157 52561
680 25 ×40 2540 2.18 1.36 170 340 157 42681
30 ×30 3030 2.04 1.36 170 340 157 52681
35 ×25 3525 2.06 1.36 170 340 157 62681
820 25 ×45 2545 2.46 1.64 120 240 157 62821
30 ×35 3035 2.35 1.64 140 240 157 32821
35 ×30 3530 2.29 1.64 160 240 157 52821
1000 30 ×40 3040 2.66 2.00 120 225 157 52102
35 ×30 3530 2.33 2.00 160 225 157 62102
1200 30 ×45 3045 2.98 2.40 100 190 157 32122
35 ×35 3535 2.69 2.40 130 190 157 62122
1500 30 ×50 3050 3.31 3.00 90 155 157 42152
35 ×40 3540 3.04 3.00 110 155 157 52152
1800 35 ×45 3545 3.36 3.60 90 130 157 42182
2200 35 ×50 3550 3.68 4.40 80 105 157 52222
1998 Jan 29 455
Philips Components Product specification
Aluminium electrolytic capacitors
Power Ultra Miniature Snap-in 157 PUM-SI
L
250 220 22 ×30 2230 1.23 0.55 340 700 157 53221
270 22 ×30 2230 1.32 0.67 280 560 157 43271
25 ×25 2525 1.23 0.67 280 560 157 53271
330 22 ×35 2235 1.53 0.82 230 430 157 33331
25 ×30 2530 1.56 0.82 230 430 157 53331
390 22 ×40 2240 1.74 0.97 190 425 157 43391
30 ×25 3025 1.58 0.97 230 425 157 53391
470 25 ×35 2535 1.87 1.17 180 320 157 33471
30 ×30 3030 1.89 1.17 190 320 157 53471
560 25 ×40 2540 2.12 1.40 160 360 157 43561
30 ×30 3030 1.97 1.40 180 360 157 53561
35 ×25 3525 1.80 1.40 180 360 157 63561
680 25 ×45 2545 2.29 1.70 130 260 157 63681
30 ×35 3035 2.28 1.70 160 260 157 33681
35 ×30 3530 2.20 1.70 170 260 157 53681
820 30 ×40 3040 2.57 2.05 120 210 157 53821
35 ×35 3535 2.54 2.05 140 210 157 63821
1000 30 ×45 3045 2.88 2.50 110 180 157 33102
35 ×40 3540 2.86 2.50 120 180 157 53102
1200 35 ×45 3545 3.17 3.00 100 160 157 43122
1500 35 ×50 3550 3.49 3.75 90 140 157 53152
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
D×L
(mm)
CASE
CODE
IR
120 Hz
85 °C
(A)
IL5
5 min
(mA)
TYP. ESR
100 Hz(1)
(m)
Z
10 kHz
(m)
CATALOGUE
NUMBER
2222 ... .....
1998 Jan 29 456
Philips Components Product specification
Aluminium electrolytic capacitors
Power Ultra Miniature Snap-in 157 PUM-SI
400 68 22 ×25 2225 0.71 0.27 1180 1950 157 56689
82 22 ×25 2225 0.77 0.33 990 1620 157 56829
100 22 ×30 2230 0.94 0.40 930 1220 157 56101
120 22 ×30 2230 0.97 0.48 870 1140 157 56121
150 22 ×35 2235 1.13 0.60 700 900 157 36151
25 ×30 2530 1.16 0.60 680 900 157 56151
180 22 ×40 2240 1.29 0.72 590 725 157 46181
25 ×35 2535 1.35 0.72 550 725 157 36181
220 25 ×40 2540 1.54 0.88 520 590 157 46221
30 ×30 3030 1.50 0.88 470 590 157 56221
35 ×25 3525 1.42 0.88 470 590 157 66221
270 25 ×45 2545 1.72 1.08 400 560 157 66271
30 ×35 3035 1.74 1.08 380 560 157 36271
35 ×30 3530 1.71 1.08 400 560 157 56271
330 30 ×40 3040 1.97 1.32 320 525 157 56331
35 ×30 3530 1.76 1.32 370 525 157 66331
390 30 ×45 3045 2.19 1.56 270 420 157 56391
35 ×35 3535 2.04 1.56 300 420 157 36391
470 30 ×50 3050 2.40 1.88 240 350 157 46471
35 ×40 3540 2.30 1.88 250 350 157 56471
560 35 ×45 3545 2.55 2.24 210 305 157 46561
680 35 ×50 3550 2.79 2.72 190 265 157 56681
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
D×L
(mm)
CASE
CODE
IR
120 Hz
85 °C
(A)
IL5
5 min
(mA)
TYP. ESR
100 Hz(1)
(m)
Z
10 kHz
(m)
CATALOGUE
NUMBER
2222 ... .....
1998 Jan 29 457
Philips Components Product specification
Aluminium electrolytic capacitors
Power Ultra Miniature Snap-in 157 PUM-SI
L
Note
1. ESR at 120 Hz is approximately 0.95 ×ESR 100 Hz.
450 56 22 ×25 2225 0.68 0.25 1200 1880 157 57569
68 22 ×30 2230 0.80 0.30 1230 1530 157 57689
82 22 ×30 2230 0.87 0.36 1030 1290 157 47829
25 ×25 2525 0.85 0.36 1030 1290 157 57829
100 22 ×35 2235 1.00 0.45 840 1050 157 37101
25 ×30 2530 1.02 0.45 860 1050 157 57101
120 22 ×40 2240 1.15 0.54 710 885 157 47121
25 ×30 2530 1.09 0.54 710 885 157 57121
30 ×25 3025 1.10 0.54 710 885 157 67121
150 25 ×40 2540 1.35 0.67 570 705 157 47151
25 ×35 2535 1.27 0.67 600 705 157 67151
30 ×30 3030 1.32 0.67 600 705 157 57151
180 25 ×40 2540 1.45 0.81 480 605 157 47181
30 ×35 3035 1.49 0.81 490 605 157 57181
35 ×25 3525 1.35 0.81 490 605 157 67181
220 25 ×50 2550 1.73 0.99 400 525 157 47221
30 ×40 3040 1.72 0.99 410 525 157 57221
35 ×30 3530 1.61 0.99 440 525 157 67221
270 30 ×45 3045 1.95 1.21 340 450 157 37271
35 ×35 3535 1.86 1.21 360 450 157 67271
330 30 ×50 3050 2.19 1.48 280 390 157 47331
35 ×40 3540 2.10 1.48 300 390 157 57331
390 35 ×45 3545 2.34 1.75 250 340 157 47391
470 35 ×50 3550 2.60 2.11 210 290 157 57471
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
D×L
(mm)
CASE
CODE
IR
120 Hz
85 °C
(A)
IL5
5 min
(mA)
TYP. ESR
100 Hz(1)
(m)
Z
10 kHz
(m)
CATALOGUE
NUMBER
2222 ... .....
1998 Jan 29 458
Philips Components Product specification
Aluminium electrolytic capacitors
Power Ultra Miniature Snap-in 157 PUM-SI
Additional electrical data
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage for short periods 400 V versions Us= 1.1 ×UR
250 V versions Us= 1.15 ×UR
Reverse voltage not allowed
Current
Leakage current after 5 minutes at URIL5 0.01CR×UR
Inductance
Equivalent series inductance (ESL) all case sizes typ. 19 nH
max. 25 nH
Dissipation factor
Tangent of loss angle all types tan δ≤0.15
1998 Jan 29 459
Philips Components Product specification
Aluminium electrolytic capacitors
Power Ultra Miniature Snap-in 157 PUM-SI
L
RIPPLE CURRENT AND USEFUL LIFE
Table 3 Multiplier of ripple current (IR) as a function of frequency
FREQUENCY
(Hz) IR MULTIPLIER
50 0.9
100 0.95
120 1.0
200 1.15
1000 1.3
10000 1.4
Fig.4 Multiplier of useful life as a function of ambient temperature and ripple current load.
IA= actual ripple current at 120 Hz and 85 °C.
IR= rated ripple current at 120 Hz and 85 °C.
(1) Useful life at 85 °C and IR applied: 2500 hours.
handbook, full pagewidth
2.4
2.1
2.0
1.8
1.6
1.2
1.1
1.0
0.8
0.5
0.0 40 50 60 70 80 90 100
Tamb (C)
o
MGB264
1.3
1.4
1.5
1.7
1.9
2.2
2.3
lifetime multiplier
1
1.2
1.5
2
3
4
2.5
5
8
10
15
20
30
60
80
IA
R
I
(1)
1998 Jan 29 460
Philips Components Product specification
Aluminium electrolytic capacitors
Power Ultra Miniature Snap-in 157 PUM-SI
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in this handbook, Section
“Tests and Requirements”
.
Table 4 Test procedures and requirements
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 384-4/
CECC 30300
subclause 4.13
Tamb =85°C; UR applied;
2000 hours C/C: ±10%
tan δ≤2×spec. limit
IL5 spec. limit
Load life Tamb =85°C; UR and IR applied;
2000 hours C/C: ±20%
tan δ≤2×spec. limit
IL5 spec. limit
Useful life CECC 30301
subclause 1.8.1 Tamb =85°C; UR and IR applied;
2500 hours C/C: ±30%
tan δ≤3×spec. limit
IL5 spec. limit
no short or open circuit,
no visible damage
total failure percentage:3%
Shelf life
(storage at
high temperature)
IEC 384-4/
CECC 30300
subclause 4.17
Tamb =85°C; no voltage applied;
1000 hours
after test: UR to be applied for 30 minutes,
24 to 48 hours before measurement
C/C: ±15%
tan δ≤1.5 ×spec. limit
IL5 1× spec. limit