Multimode Microlens Array P1L 12ch Flat/P1L12A 12ch Right Angle/P1L12C Flat and Right Angle Type Micro Lens Arrays Provide Low Cost Optical Connections in Free Space Applications Features * Easy alignment with high precision positioning holes based on MT guide pins * Low cost achieved by high precision injection molding * Anti-reflective (AR) coating available * Insertion loss (IL) can be reduced through customization * Custom lens and various channel configurations available (i.e. 1 x 4, 2 x 12, etc.) Specifications Type Flat (Collimator Type) Flat (Focuser Type) Right Angle Number of Lens 1 x 12 1 x 12 2 x 12 Insertion Loss 2.0dB (Typ. 1.2dB) *1 2.0dB (Typ. 1.5dB) *2 2.5dB (Typ. 1.5dB) *3 Cross Talk 50dB 50dB 50dB Lens Position Tolerance 0.005mm *4 0.005mm *4 0.005mm *4 Dimensions W2.5 x L6.4 x H0.55mm W2.5 x L6.4 x H0.55mm W2.6 x L6.4 x H2.6mm *1 Light Source: 850nm (Steady State Mode by LED)/Air Gap: 1.5mm (Lens to Lens) Attached to the MT guide pin without any other alignment and matching glue *2 Light Source: 850nm_VCSEL(*12um, Divergence < 30)/Air Gap: 0.3mm (VCSEL to Lens), 0.3mm (Lens to Fiber) active alignment for VCSEL side, non active alignment for fiber side without matching glue between fiber and lens *3 Light Source: 850nm (Steady State Mode by LED)/Air Gap: 0.4mm (Fibre to Lens) Attached to the MT guide pin without any other alignment and matching glue *4 Lens position tolerance is defined as an error to the true position referred to the center point of alignment holes Applications * * * * * Free-space Optical Connectivity Transceiver (For Parallel Optical Link) Optical Interconnection Board-to-board Chip-to-chip Interconnection Dimensions (mm) 1-847-882-2288 www.components.omron.com Structures