Multimode Microlens Array
1-847-882-2288
www.components.omron.com
12ch Flat/P1L12A
12ch Right Angle/P1L12C
P1L
Structures
Dimensions (mm)
Specifications
Type Flat (Collimator Type) Right Angle
Number of Lens 1 x 12 2 x 12
Insertion Loss 2.0dB (Typ. 1.2dB) *1 2.5dB (Typ. 1.5dB) *3
Cross Talk 50dB 50dB
Lens Position Tolerance 0.005mm *4 0.005mm *4
Dimensions W2.5 x L6.4 x H0.55mm W2.6 x L6.4 x H2.6mm
Flat (Focuser Type)
1 x 12
2.0dB (Typ. 1.5dB) *2
50dB
0.005mm *4
W2.5 x L6.4 x H0.55mm
Features
Low cost achieved by high precision injection molding
Anti-reflective (AR) coating available
Insertion loss (IL) can be reduced through customization
Custom lens and various channel configurations available (i.e. 1 x 4, 2 x 12, etc.)
*1 Light Source: 850nm (Steady State Mode by LED)/Air Gap: 1.5mm (Lens to Lens) 
Attached to the MT guide pin without any other alignment and matching glue
*2
Light Source: 850nm (Steady State Mode by LED)/Air Gap: 0.4mm (Fibre to Lens)
Attached to the MT guide pin without any other alignment and matching glue
Light Source: 850nm_VCSEL(*12um, Divergence < 30°)/Air Gap: 0.3mm
(VCSEL to Lens), 0.3mm (Lens to Fiber) active alignment for VCSEL side, 
non active alignment for fiber side without matching glue between fiber and lens
*3
*4 Lens position tolerance is defined as an error to the true
position referred to the center point of alignment holes
Applications
Transceiver (For Parallel Optical Link)
Optical Interconnection
Board-to-board
Chip-to-chip Interconnection
Free-space Optical Connectivity
Easy alignment with high precision positioning
holes based on MT guide pins
Flat and Right Angle Type Micro Lens Arrays
Provide Low Cost Optical Connections in 
Free Space Applications