VCUT07B1-HD1
www.vishay.com Vishay Semiconductors
Rev. 1.0, 21-Feb-12 1Document Number: 84137
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode
in LLP1006-2L
MARKING (example only)
Bar = pin 1marking
X = date code
Y = type code (see table below)
FEATURES
• Ultra compact LLP1006-2L package
• Low package profile < 0.4 mm
• 1-line ESD-protection
• Working range ± 7 V
• Low leakage current IR < 0.1 μA
• Low load capacitance CD = 14 pF
• ESD-protection acc. IEC 61000-4-2
± 30 kV contact discharge
± 30 kV air discharge
• Soldering can be checked by standard vision inspection;
no X-ray necessary
• Pin plating NiPdAu (e4) no whisker growth
• e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn)
• Compliant to RoHS Directive 2011/65/EU
Note
** Please see document “Vishay Material Category Policy”:
www.vishay.com/doc?99902
20855
21129
12
21121
XY
ORDERING INFORMATION
DEVICE NAME ORDERING CODE TAPED UNITS PER REEL
(8 mm TAPE on 7" REEL) MINIMUM ORDER QUANTITY
VCUT07B1-HD1 VCUT07B1-HD1-G4-08 8000 8000
PACKAGE DATA
DEVICE NAME PACKAGE
NAME
TYPE
CODE WEIGHT MOLDING COMPOUND
FLAMMABILITY RATING
MOISTURE
SENSITIVITY LEVEL
SOLDERING
CONDITIONS
VCUT07B1-HD1 LLP1006-2L U 0.72 mg UL 94 V-0 MSL level 1
(according J-STD-020) 260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS
PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT
Peak pulse current acc. IEC 61000-4-5; tp = 8/20 μs; single shot IPPM 4A
Peak pulse power Pin 1 to pin 2
acc. IEC 61000-4-5; tp = 8/20 μs; single shot PPP 60 W
ESD immunity Contact discharge acc. IEC 61000-4-2; 10 pulses VESD
± 30 kV
Air discharge acc. IEC 61000-4-2; 10 pulses ± 30 kV
Operating temperature Junction temperature TJ- 40 to + 125 °C
Storage temperature Tstg - 55 to + 150 °C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT
Protection paths Number of lines which can be protected Nchannel --1lines
Reverse working voltage VRWM --7V
Reverse voltage at IR = 0.1 μA VR7--V
Reverse current at VR = 7 V IR--0.1μA
Reverse breakdown voltage at IR = 1 mA VBR 7.3 - - V
Reverse clamping voltage at IPP = 1 A VC
-912V
at IPP = IPPM = 4 A - - 15 V
Capacitance at VR = 0 V; f = 1 MHz CD
-1416pF
at VR = 2.5 V; f = 1 MHz - 11 - pF
VCUT07B1-HD1
www.vishay.com Vishay Semiconductors
Rev. 1.0, 21-Feb-12 2Document Number: 84137
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CUT THE SPIKES WITH VCUT07B1-HD1:
The VCUT07B1-HD1 is a Bidirectional and Symmetrical (BiSy) ESD-protection device which clamps positive and negative
overvoltage transients to ground. Connected between the signal or data line and the ground the VCUT07B1-HD1 offers a high
isolation (low leakage current, low capacitance) within the specified working range. Due to the short leads and small package
size of the tiny LLP1006-2L package the line inductance is very low, so that fast transients like an ESD-strike can be clamped
with minimal over- or undershoots.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - ESD Discharge Current Wave Form
acc. IEC 61000-4-2 (330 /150 pF)
Fig. 2 - 8/20 μs Peak Pulse Current Wave Form
acc. IEC 61000-4-5
Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR
Fig. 4 - Typical Reverse Voltage VR vs. Reverse Current IR
0 %
20 %
40 %
60 %
80 %
100 %
120 %
- 10 0 10 20 30 40 50 60 70 80 90 100
Time (ns)
Discharge Current IESD
Rise time = 0.7 ns to 1 ns
53 %
27 %
20557
0 %
20 %
40 %
60 %
80 %
100 %
010203040
Time (µs)
I
PPM
20 µs to 50 %
8 µs to 100 %
20548
12
14
16
8
10
12
4
6
0
2
- 8 - 6 - 4 - 2 0 2 4 6 8
f = 1 MHz
Pin 2 - 1
V
R
(V)
C
D
(pF)
22630
I
R
(µA)
V
R
(V)
6
8
10
0
2
4
- 6
- 4
- 2
- 10
- 8
0.01 0.1 1 10 100 1000 10 000
Pin 2 - 1
22631
VCUT07B1-HD1
www.vishay.com Vishay Semiconductors
Rev. 1.0, 21-Feb-12 3Document Number: 84137
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 5 - Typical Peak Clamping Voltage VC vs.
Peak Pulse Current IPP
Fig. 6 - Typical Clamping Performance at + 8 kV
Contact Discharge (acc. IEC 61000-4-2)
Fig. 7 - Typical Clamping Performance at + 8 kV
Contact Discharge (acc. IEC 61000-4-2)
Fig. 8 - Typical Peak. Clamping Voltage at ESD Contact Discharge
(acc. IEC 61000-4-2)
V
C
(V)
I
PP
(A)
22632
15
10
0
5
- 5
- 15
- 10
0 1 2 3 4 5
negative surge
positive surge
Measured acc. IEC 6100-4-5
(8/20 μs - wave form)
Pin 2-1 VC
t (ns)
22633
50
60
70
2
30
40
0
10
20
- 20
- 10
- 10 0 10 20 30 40 50 60 70 80 90
Pin 2-1 acc. IEC 61000-4-2
+ 8 kV
contact discharge
V
C-ESD
(V)
0
10
20
- 20
- 30
- 10
- 50
- 40
- 70
- 60
-10 0 10 20 30 40 50 60 70 80 90
Pin 2-1 acc. IEC 61000-4-2
- 8 kV
contact discharge
22634
t (ns)
V
C-ESD
(V)
V
C-ESD
(V)
V
ESD
(kV)
40
60
0
20
- 20
- 40
- 60
0 5 10 15 20 25
negative discharge
positive discharge
acc. IEC 61000-4-2 contact discharge
Pin 2-1
22635
30 ns
VC-ESD
VCUT07B1-HD1
www.vishay.com Vishay Semiconductors
Rev. 1.0, 21-Feb-12 4Document Number: 84137
For technical questions, contact: ESDprotection@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters (Inches): LLP1006-2L
20812
Document no.:S8-V-3906.04-005 (4)
Rev. 5 - Date: 21 April 2010
Created - Date: 13. July. 2007
Foot print recommendation:
solder
resist mask
solder pad
0.55 [0.022]
0.45 [0.018]
0.25 [0.010]
0.15 [0.006]
0.45 [0.018]
0.35 [0.014]
0.3 [0.012]
0.2 [0.008]
0.4 [0.016]
0.33 [0.013]
1.05 [0.041]
0.95 [0.037]
soldermask opening ± 0.03
measured middle of the package
0.05 [0.002]
0 [0.000]
0.125 [0.005] Ref.
0.65 [0.026]
0.55 [0.022]
0.05 [0.002]
0.25 [0.010]
0.5 [0.020]
1 [0.039]
0.5 [0.020]
0.6 [0.024]
0.2 [0.008]
Orientation Identification
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
