Marking Options & Accessories Double Row Terminal Blocks (TB100, TB200, TB300, TB345 SERIES) Single & Double Row Filtered Connectors Marking Options Standard Marking L1 1 2 3 3 2 1 L2 L3 1 2 3 L4 L5 L6 Euro-MAG Series PCB - Spring Clamp 1 2 3 Note: Blocks marked on both sides require a different code for each side. Example Style L1 on one side of the block requires Style L2 on the other side to ensure common terminal marking. To order, add appropriate suffix (L1, L2, L3, L4, L5 and/or L6) to block part number in the proper sequence. 1 2 3 3 2 1 Standard markings are applied directly to the side(s) of a block. Standard color is white. Standard height is .125". RED BLK BLU 3 4 134 20A 134 G GND M 300V MAX A OUT PUT 3AC 5 MAS TER Base & Rail Mount Connectors K MB Special markings are available at an additional charge for preparation. Production charges for setup, handling and marking are the same as for standard marking. Drawing(s) must be submitted to ensure accuracy of part required. Consult factory for price and delivery. INPUT Special Marking Note: Marking is not available on TB400 Series Covers Covers prevent personnel, screws and foreign items from contacting live terminals. Available in white or clear plastic. Two cover clips supplied with each cover. Cover width is 1.31 inches. Power Distribution Blocks All covers must be ordered separately. Consult factory for special legends. Example: 10 position cover, white, TB100 Series, no legends . . . Part No. is X12010. Part Numbering System Series Cover Strip Poles X 02 to 36 (TB100) 02 to 30 (TB200/TB200HB) 02 to 24 (TB300/TB345) Part Number DD1 - TB100 Series DD2 - TB200 Series DD2HB - TB200HB Series DD3 - TB300 Series Note: Covers are not available on TB400 Series. 35 WIRE MANAGEMENT PRODUCTS 120 - TB100/white 119 - TB100/clear 220 - TB200 - white 220HB - TB200HB - white 219 - TB200 - clear 219HB - TB200HB - clear 320 - TB300 & TB345 - white 319 - TB300 & TB345 - clear Cover Clips - Bulk