67.30 MHz Filter
for Broadband Access Applications
Part Number SF0067BA01807T
Micro Networks Corp., 324 Clark Street, Worcester, MA 01606, USA tel: 508-852-5400, fax:508-852-8456, www.micronetworks.com
Rev 1.1 11-Feb-03
Page 1 of 2
TYPICAL PERFORMANCE
Horizontal: 2 MHz/div Vertical (from top): Magnitude 10 dB/div
Magnitude 2 dB/div
Phase 10 deg/div
SPECIFICATION
PARAMETER Min Typ Max Units
Center Frequency (Fc) 1 67.20 67.32 67.40 MHz
3 dB Bandwidth 10.40 10.45 MHz
15 dB Bandwidth 10.74 10.80 MHz
Passband Ripple 2 1.6 2.2 dB
Insertion Loss 23.6 25.0 dB
Phase Linearity 2 5.2 8.0 deg
Source and Load Impedance 50 Ω
Rejection (10 MHz to 60.7 MHz) 50 >55 dB
Rejection (73.9 MHz to 180 MHz) 50 >55 dB
Input Power +10 +13 dBm
Operating Temperature Range 23
° C
Notes: 1. Any specified band edges are referenced to this frequency.
2. Parameter measured inside the 3 dB bandwidth
67.30 MHz Filter
for Broadband Access Applications
Part Number SF0067BA01807T
Micro Networks Corp., 324 Clark Street, Worcester, MA 01606, USA tel: 508-852-5400, fax:508-852-8456, www.micronetworks.com
Micro Networks
Worldwide Headquarters: 324 Clark Street Worcester, MA 01606. tel: 508-852-5400 fax: 508-852-8456
European Sales Headquarters: Hertosingel 20 6214 AD Maastricht, Netherlands. tel: +31-43-32-70912 fax: +31-43-32-70715
www.micronetworks.com
Rev 1.1 11-Feb-03
Page 2 of 2
PACKAGE OUTLINE
Units: mm
Pin Configuration:
Input: 8
Input Return: 7
Output: 4
Output Return: 5
Ground: 1,2,3,6
MATCHING CIRCUIT
Typical component values: Lp1 = 100 nH Rp1 = 100 Ω
Rp2 = 330 Ω Ls1 = 220 nH
(minimum inductor Q = 45) Cp1 = 33 pF
Notes - Requires 2% matching components.
- Component values may change depending on board layout. ISO 9001
Registered
8 4
7 5
Lp1 Rp1 Rp2
Ls2
Cp2
