Slotted Optical Switch OPB420AZ & OPB420BZ Features: * Non-contact switching * Right Angle Sensor: LED in tower, photosensor in base * Choice of output configuration * Optical line can be broken in three axis * 24" minimum, 26 AWG UL approved wire leads Product Photo Here Description: The OPB420 series optical switch consists of an infrared emitting diode (LED) and a phototransistor. The LED is mounted on the tower with the phototransistor mounted on the base of a right angle shape package. The L-Shape or right angle package configuration allows for an opaque object to block the light beam from a multitude of directions including the X-axis Y-axis and Z-axis. The optical center line between the emitter and photosensor is at 45 from the mounting base of the device. The OPB420AZ utilizes a phototransistor with a current output proportional to the input drive current of the LED. The OPB420BZ utilizes a phototransistor with a base-emitter resistance (RBE) which provides protection from low level light conditions. The OPB420BZ is ideal for applications that require an enhanced contrast ratio and immunity to background irradiance, such as detection of semitransparent media. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: * * * * * * * * * * Non-contact interruptive object sensing Tray-out sensor Low paper tray sensor Corner sensor Printers Copying machines Paper sorting equipment Amusement gaming equipment Door sensor Optical Switch RoHS Part # OPB420AZ OPB420BZ LED Wavelength 880 nm OPB420AZ PhotoSensor Phototransistor RBE Phototransistor OPB420BZ OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 11/08 Page 1 of 6 Slotted Optical Switch OPB420AZ & OPB42BZ Mechanical Package Information Description Wire Color Anode Red Cathode Black Collector White Emitter Green Dimensions are in Inches [Millimeters] Tolerances 0.010" [0.25mm] OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 11/08 Page 2 of 6 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Slotted Optical Switch OPB420AZ & OPB420BZ Phototransistor Version Absolute Maximum Ratings (TA=25C unless otherwise noted) Storage & Operating Temperature Range -40 C to +85 C Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron] (1) 260 C Input Diode Continuous Forward Current 50 mA Peak Forward Current (1 s pulse width, 300 pps) 1A Reverse Voltage 2V Power Dissipation (2) 100 mW Output Phototransistor Collector-Emitter Breakdown Voltage OPB420AZ OPB420BZ 30 V 24 V Power Dissipation (2) 100 mW Electrical Characteristics (TA = 25C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP240 or OP265 for additional information) VF Forward Voltage 1.2 - 1.7 V IF = 20 mA IR Reverse Current - - 100 A VR = 2 V Output Phototransistor (See OP505 or OP705 for additional information) V(BR)CEO Collector-Emitter Breakdown Voltage OPB420AZ OPB420BZ 30 24 - - V IC = 1 mA IC = 100 A V(BR)ECO Emitter-Collector Breakdown Voltage OPB420AZ OPB420BZ 5.0 0.4 - - V IE = 100 A Collector-Emitter Dark Current - - 100 nA VCE = 10 V, IF = 0, EE = 0 Collector-Emitter Saturation Voltage - - 0.4 V IC = 250 A, IF = 20 mA 1.0 - 10.0 mA VCE = 5.0 V, IF = 20 mA - - 450 A VCE = 5 V, IF = 1 mA (5) ICEO Combined VCE(SAT) IC(ON) On-State Collector Current IC(Off) Off-State Collector Current-- OPB420BZ Notes: (1) (2) (3) (4) (5) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. Derate linearly 1.67 mW/C above 25 C.. Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and ketones. All parameters were tested using pulse technique. Simulated optical path blocked with infrared semi-transparent object OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 11/08 Page 3 of 6 Slotted Optical Switch OPB420AZ & OPB42BZ Typical Output Current Vs Forward Current 250% VCE = 5 VDC, TA = 25C Normalized to IF = 20 mA 225% Typical Output Current Vs Forward Current 200% 20% Normalized to IF = 20mA and VCE = 5VDC at TA = 25 Normalized Output Current - % Normalized Output Current - % 18% 16% 14% 12% 10% OPB420AZ - Phototransistor 8% 6% OPB420BZ - RBEPhototransistor 4% 175% 150% 125% 100% 75% Phototransistor 2% 50% 0% 0.0 1.0 2.0 3.0 4.0 5.0 25% IF - Forward Current - mA RBE Phototransistor 0% 0 5 10 15 20 25 30 35 IF - Forward Current -mA 40 45 50 Typical Output Current Vs Distance (Z Axis Blocked) 100% 90% VCE = 5 VDC IF = 20 mA Normalized Output Current - % 80% Z-Flag Direction 70% 60% 50% 40% 30% 20% 10% 0% 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 0.22 0.24 0.26 Blocking Distance - Inches OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 11/08 Page 4 of 6 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Slotted Optical Switch OPB420AZ & OPB420BZ Typical Output Current Vs Distance (Y-Axis Blocked) 100% 90% Y-Flag Direction Normalized Output Current - % 80% VCE = 5VDC IF = 20 mA 70% 60% Flag at 0.4" Flag at 0.2" Flag at 0.0" 50% 40% 30% 20% 10% 0% 0.00 0.10 0.20 0.30 0.40 0.50 0.60 Blocking Distance - Inches Typical Output Current Vs Distance X-Axis Blocked 100% 90% VCE = 5VDC IF = 20mA Normalized Output Current -% 80% 70% X-Flag Direction 60% Flag at 0.00 Flag at 0.15 Flag at 0.30 50% 40% 30% 20% 10% 0% 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 Blocking Distance - inches OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 11/08 Page 5 of 6 Slotted Optical Switch OPB420AZ & OPB42BZ Typical Collector Current vs Collector to Emitter Voltage 225% Normalized to IF = 20mA and VCE = 5 VDC IF=40mA 200% IF=35mA 175% Normalized Collector Current % IF=30mA 150% IF=25mA 125% IF=20mA 100% IF=15mA 75% IF=10mA 50% 25% IF=5mA 0% 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 VCE - Collector to Emitter Voltage - Volts Typical Output Current vs Ambient Temperature 120% 100% Normalized Output Current IF = 5 mA IF = 20 mA and 40 80% Normalized for each IF current at VCC = +5 VDC and TA = 20C 60% 40% 20% 0% -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 Ambient Temperature (C) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 11/08 Page 6 of 6 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com