A distributed automation system does not contain any central automated control
cabinets. Controls, sensors and actuators are designed for a high degree of protection
(IP 65 / IP 67) and are installed directly in the field. In connection with these innovative
installation concepts with distributed devices, users are demanding a standard
connector family that is compatible with all interfaces. In response to these needs, the
HARTING PushPull series has set the respective new appliance connection standard.
PushPull technology is available for data, signal and power applications. Other
interfaces accommodating USB or fiber optics (LC, SCRJ) supplement the universal
range of the PushPull solutions. The integration of communication and power lines
in a hybrid PushPull connector is a genuine trend-setting advance. In view of these
strengths, the PushPull container has become the standard for current and future
appliance interfaces. The German automotive industry, for example, has opted for the
implementation of the PushPull connector family.
02. PushPull CONNECTORS
Board
to
Board
Cable/
Wire
to
Board
IP 20 IP 65 /
IP 67
Data Signal Power
Data
transfer
rate
Shielding Number of
contacts,
contact
density
Voltage,
working
current
Cable termination
Han-
Quick Lock®
IDC
HARAX®
Crimp
Screw Cage
clamp
Axial
screw
PCB termination
THT SMC SMT
Press-in
Application standard
Separate
housing
Integrated
housing
EnvironmEntConnECtion typE
high performance
Housing integration
AppliCAtion
Application profile:
1) Piercing contacts
1)
PushPull
02
01
02. PushPull CONNECTORS
CONTENTS PAGE
Introduction PushPull termination technology 02.02
HARTING PushPull type acc. to IEC 61 076-3-106 variant 4
HARTING PushPull – housing bulkhead mounting for device integration 02.04
HARTING PushPull RJ45 02.05
HARTING PushPull LC duplex 02.09
HARTING PushPull Hybrid 02.11
HARTING PushPull Signal 02.15
HARTING PushPull USB 02.17
HARTING PushPull Power, 4-poles, 48 V (12 A) 02.20
HARTING PushPull Power, 3-poles, 250 V (16 A) 02.23
HARTING PushPull Power – Tooling and accessories 02.24
Han® PushPull type acc. to IEC 61 076-3-117 variant 14
Han® PushPull RJ45 02.27
Han® PushPull SCRJ and tooling 02.43
Han® PushPull Signal 02.50
Han® PushPull Power 4/0, 5-poles, 230/400 V (16 A) 02.53
Han® PushPull Power 4/0 – Contacts and tooling 02.59
Han® PushPull Power L 4/0, 5-poles, 24 V (16 A) 02.61
02
02
PushPull
The PushPull connector housing is a function container with
degree of protection IP 65 / IP 67 and is available in two
standardized housing sizes. These containers are equipped with
standard RJ45, FOC or power contacts for operation at 5 x 16 A,
depending on application requirements. The PushPull connector
can be delivered either as plastic, or as metal variant, depending
on the installation environment.
THE PushPull PRINCIPLE
PushPull connector applications combine two basic advantages:
1. Simple operation
2. Safe and vibration resistant sealed IP 65 / IP 67 connection.
The innovative PushPull lock mechanism dispenses with the need
for a latching bracket. The connector can be inserted with one
hand, minimum force and an audible click for safe operation. The
connection can be removed again just as easily for service work.
COPPER, FOC AND POWER – IN THE SAME DESIGN
HARTING offers two series of the PushPull connector system,
which differ in terms of their outer dimensions and module
inserts.
Han® PushPull (IEC 61 076-3-117 VARIANT 14)
This series represents the standard PROFINET device interface for
the IP 67 environment of the German automobile manufacturing
industry.
The connector is available as metal and as plastic version. The
RJ45 module for copper conductors and the SCRJ module for
FOCs are available as data connectors. The RJ45 variant is
realized by means of the RJ Industrial module equipped with
HARAX® quick connection technology. The power module which is
installed in the same container can be assembled on-site, either
with crimp contacts or with innovative Quick Lock® technology
in order to wire the distributed field devices to 230/400 V
(16 A) power. This 5-pole connector enables the transfer of two
02. PushPull CONNECTORS
02
03
PushPull
independent 24 V control circuits with functional ground, or the
transfer of a three-phase voltage of 400 V (16 A).
HARTING PushPull (IEC 61 076-3-106 VARIANT 4)
This extremely compact and space-saving series provides an
Ethernet appliance connection with degree of protection
IP 65 / IP 67 that requires no more installation space than a M12
connector. The RJ45 variant for copper conductors and the LC
variant for FOCs are available as modules for data connectors.
The RJ45 variant is realized by means of HARAX® quick connec-
tion technology as used with HARTING RJ Industrial®. The 4-pole
module for 48 V (12 A) or the 3-pole module for 250 V (16 A) can
be used to supply power to the distributed field devices.
HARTING PushPull HYBRID
The migration from Fieldbus to Ethernet within communication
technology has simplified machine installation options. This
simplification is attained by combining the data and the 24 V
power lines in a single hybrid cable with hybrid connector, in
connection with the spatial requirements of an M12 connector.
The HARTING PushPull Hybrid offers trend-setting connection
technology for this new method of machine installation.
The PushPull Hybrid reduces everything by half: the number of
connection points and cables, and spatial requirements for the
connection technology.
The PushPull Hybrid makes everything easier: machine
installation, the wiring of connectors and safe insertion.
APPLIANCE INTEGRATION:
In order to support the implementation of appliances with degree
of protection IP 65 / IP 67, HARTING offers panel feed-through
devices with integrated couplings and female contact modules for
direct mounting on PCBs.
HARTING PushPull
ONE CONCEPT FOR DATA, SIGNAL AND POWER
The internationally standardized PushPull connector represents
the latest generation of appliance connection technology with high
degree of protection IP 65 / IP 67, easy insertion and snap-action
engagement with audible click.
The PushPull housing family is designed for the integration of a wide
range of contact inserts for data, signal and power lines.
INSTALLATION IN PLANTS
WITH Han® PushPull CONNECTORS:
• ThestandardforPROFINETcommunication
• Onehousingfortheelectricalandopticaldatatransferandfor
power supply
• Plasticormetalhousingvariants
INSTALLATION IN MACHINES
WITH HARTING PushPull HYBRID CONNECTORS:
• Combineddatalinesandappliancepowersupplyupto5Ainthe
same connector
• Compactsize(comparablewithM12)
• Straightandangledconnectordesign,suitableforon-site
assembly and overmolded
POWER SUPPLY TO DISTRIBUTED DEVICES
USING PushPull CONNECTORS:
• Variant 4:48V(12A),4-poleor250V(16A),3-pole
• Variant14:400V(12A)5-pole,or24V(16A)5-pole
• LatestconnectiontechnologyQuickLock®foron-siteassembly
without special auxiliary tools
SPECIAL SERIES FEATURES
02
04
PushPull
09 45 545 0030
1)
09 45 595 0030
2)3)
09 45 545 0031
2)
09 45 595 0031
2)3)
09 45 545 0032
09 45 545 00232)
09 45 545 00332)
09 45 545 00212)
09 45 545 00292)
09 45 545 0027
09 45 545 0028
HARTING PushPull
HARTING PushPull Technology acc. to IEC 61076-3-106 variant 4
housing bulkhead mounting for device integration of RJ45-, USB- and Power-jacks
Advantages Technical characteristics
Identification Part No. Drawing Dimensions in mm
l PushPull housing bulkhead mounting with HARTING
PushPull technology
l Compact, space-saving design for device
integration of RJ45- or Power-pcb female
Housing bulkhead mounting EasyInstall
l for simple device integration round panel cut out
Housing bulkhead mounting Compact
l high packing density
(spacing 27 x 21 mm)
Locking PushPull Technology
acc. to IEC 61 076-3-106 variant 4
Transmission rate 10/100/1000 Mbit/s
Shielding fully shielded,
360° shielding contact
Mating cycles min. 750
Degree of protection IP 65 / IP 67
Temperature range -40 °C … +70 °C
Housing material Plastic, black
Flammability
acc. to UL 94 V 0
UL approval (E102079)
Panel cut
out
1) suitable RJ45 jacks: 09 45 551 1100 / … 1110 / … 1102 / … 1103 / … 1130 / … 1530
2) suitable RJ45 jacks: 09 45 551 1100 / … 1110 / … 1102 / … 1130 / … 1530
3) Metal version
Components device side
Housing bulkhead mounting – EasyInstall
with integrated seal
board drillings for M3
without fixing clip
with fixing clip
with fixing clip, for all HIFF compatible
modules
Housing bulkhead mounting
– Compact
Board drillings for M2.5
without fixing clip (incl. flat seal)
without fixing clip (with integrated seal)
with fixing clip (incl. flat seal)
with fixing clip (with integrated seal)
with fixing clip (with integrated seal) for
vertical RJ jack 09 45 551 1103
with fixing clip, for all HIFF compatible
modules
02
05
PushPull
09 45 551 11001)
09 45 551 11102)
09 45 551 11021)
09 45 551 11033)
HARTING PushPull RJ45
HARTING PushPull Technology acc. to IEC 61 076-3-106 variant 4
RJ45 jacks and accessories
Advantages Technical characteristics
Identification Part No. Drawing Dimensions in mm
l HARTING PushPull technology
l Low-profile jacks for space-saving
PCB integration
l Category of transmission Cat. 5
l Suitable for PoE (IEEE 802.3af)
and PoE+ (IEEE 802.3at)
Locking PushPull Tecgnology
acc. to IEC 61 076-3-106 variant 4
Transmission rate 10/100/1000 Mbit/s
Shielding fully shielded,
360° shielding contact
Mating cycles min. 750
Degree of protection IP 65 / IP 67
Temperature range -40 °C … +70 °C
Housing material Plastic, black
Flammability
acc. to UL 94 V 0
UL approval (E102079)
pcb layout
1) Packaging: Blister à 120 pieces
2) Packaging: Tape & Reel à 130 pieces
3) Packaging: Tape & Reel à 80 pieces
Components device side
RJ45 jacks Cat. 5
Solder variant SMD, 90° angled
Solder variant overmolded, 90° angled
Solder variant overmolded, straight
02
06
PushPull
HARTING PushPull RJ45
HARTING PushPull Technology acc. to IEC 61 076-3-106 variant 4
RJ45-panel feed-throughs and accessories
Advantages Technical characteristics
l Small, space-saving PushPull Interfaces
in IP 65 / IP 67
l Easy handling of RJ45 patch cords in switch
cabinets or sets
l Mounting to casings
Locking PushPull Technology
acc. to IEC 61 076-3-106 variant 4
Transmission rate
cat. 5 versions 10/100/1000 Mbit/s
Transmission rate
cat. 6 versions 10/100 Mbit/s / 1/10 Gbit/s
Shielding fully shielded,
360° shielding contact
Mating cycles min. 750
Degree of protection IP 65 / IP 67
Temperature range -40 °C … +70 °C
Housing material Plastic, black
Flammability
acc. to UL 94 V 0
UL approval (E102079)
Panel cut outs see page 02.04
Panel feed-through set
category of transmission Cat. 5
incl. housing bulkhead mounting EasyInstall
with integrated seal,
2 x RJ45-jack
board drillings for M3
incl. housing bulkhead mounting Compact,
flat seal,
2 x RJ45-jack
board drillings for M2.5
Panel feed-through set
category of transmission Cat. 6
incl. housing bulkhead mounting EasyInstall
with integrated seal,
2 x RJ45-jack
board drillings for M3
incl. housing bulkhead mounting Compact,
with integrated seal,
2 x RJ45-jack
Identification Part No. Drawing Dimensions in mm
09 45 245 1130
09 45 295 1130
(metal version)
09 45 245 1102
09 45 245 1590
09 45 245 1560
02
07
PushPull
HARTING PushPull RJ45
HARTING PushPull Technology acc. to IEC 61 076-3-106 variant 4
RJ45-connector
Advantages Technical characteristics
Connector, 4-poles
Cat. 5
incl. housing with RJ45 connector,
shielding and cable gland
Connector, 8-poles
Cat. 6
incl. housing with RJ45 connector,
shielding and cable gland
Wire manager white
Wire manager blue
New Cat. 6A version
(available Q3/2012)
System cables in different versions
Identification Part No. Drawing Dimensions in mm
l Ethernet connector based on RJ45
l Fully shielded, 360° shielding contact
l Field-assembly connector
with IDC contacts (Cat. 5 versions)
or piercing contacts (Cat. 6 versions)
Locking PushPull Technology
acc. to IEC 61 076-3-106 variant 4
Degree of protection
IP 65 / IP 67
Mating face RJ45 acc. to IEC 60 603-7
Cable diameter 4.9 ... 8.6 mm
Termination cross section
Cat. 5
AWG 24/7 ... AWG 22/7 (stranded)
AWG 23/1 ... AWG 22/1 (solid)
Cat. 6
AWG 24/7 ... AWG 28/7 (stranded)
Mating cycles min. 750
Temperature range -40 °C … +70 °C
Housing material Plastic, black
Flammability
acc. to UL 94 V 0
UL approval (E102079)
Reference note:
For cat. 6 patch cords it is recommended to use one connector
with a white wire manager and one with an blue cable manager,
in order to optimise the crosstalk between different signal pairs.
see catalogue “Intelligent Network Solutions”
Tools see page 01.16
09 45 145 1100
09 45 195 1100
(metal version)
09 45 145 1500
09 45 195 1500
(metal version)
09 45 145 1510
09 45 195 1510
(metal version)
09 45 145 1520
09 45 195 1520
(metal version)
02
08
PushPull
HARTING PushPull RJ45
HARTING PushPull Technology acc. to IEC 61 076-3-106 variant 4
RJ45-connector
Advantages Technical characteristics
Connector, 8-poles
Cat. 6
incl. housing with RJ45 connector,
shielding and cable gland
Colour clips
for colour coding the HARTING
PushPull connectors White
Yellow
Red
Blue
Green
System cables in different versions
Identification Part No. Drawing Dimensions in mm
l Ethernet connector based on RJ45
l Fully shielded, 360° shielding contact
l Field-assembly connector with IDC contacts
l Category of transmission: Cat. 6 / class EA suitable
for 1/10 Gbit Ethernet
Locking PushPull Technology
acc. to IEC 61 076-3-106 variant 4
Mating face RJ45 acc. to IEC 60 603-7
Cable diameter 4.9 ... 8.6 mm
Termination cross section
AWG 27/7 ... AWG 22/7 (stranded)
AWG 24/1 ... AWG 22/1 (solid)
Conductor diameter max. 1.6 mm (incl. insulation)
Mating cycles min. 750
Degree of protection
IP 65 / IP 67
Temperature range -40 °C … +70 °C
Housing material Plastic, black
Flammability
acc. to UL 94 V 0
UL approval (E102079)
see catalogue “Intelligent Network Solutions”
09 45 145 1560
09 45 195 1560
(metal version)
09 45 840 0011
09 45 840 0013
09 45 840 0017
09 45 840 0018
09 45 840 0019
02
09
PushPull
HARTING PushPull LC duplex
easy
install
HARTING PushPull type acc. to IEC 61 076-3-106 variant 4
LC duplex panel feed-through and connector
Advantages Technical characteristics
Identification Part No. Drawing Dimensions in mm
l Optical PushPull connector based on LC
with small form factor (requires 50 % compared
to SC and ST)
l EasyInstall and Compact panel feed-through for
simple device integration
l Optical module with inserts
acc. to IEC 61 754-20
l One-piece LC body assures high mechanical
stability
l A & B partsidentification for Duplex according
TIA 568 standard
Locking PushPull Technology
acc. to IEC 61 076-3-106 variant 4
Degree of protection IP 65 / IP 67
Mating face
LC acc. to IEC 61 754-20
Cable diameter 5.8 ... 7.2 mm
Mating cycles min. 200
Temperature range -40 °C … +70 °C
Housing material Plastic, black
Flammability
acc. to UL 94 V 0
HARTING PushPull LC duplex
Cable side
Multimode GOF 09 57 402 0500 000
09 57 409 0500 000
(metal version)
Singlemode GOF 09 57 402 0501 000
09 57 409 0501 000
(metal version)
Device side EasyInstall version
Multimode GOF 09 57 441 0500 000
09 57 468 0500 000
(metal version)
Singlemode GOF 09 57 441 0501 000
09 57 468 0501 000
(metal version)
Device side Compact version
Multimode GOF 09 57 442 0502 001
Singlemode GOF 09 57 442 0503 001
02
10
PushPull
09 57 400 0003 000
09 57 400 0004 000
09 57 400 0001 000
09 57 400 0002 000
HARTING PushPull LC duplex
min. max.
G 26.60 26.80
H 9.35 9.45
J 12.80 12.90
K 15.24 15.34
LC duplex IP 20 adapter for device integration
Advantages Technical characteristics
Identification Part No. Drawing Dimensions in mm
l Small form factor requires 50 %
(compared to SC and ST)
l Compact, space-saving design
l High packing density
l A & B partsidentification according
TIA 568 standard
l Complement adapter for IP 67 connector
on device side
Degree of protection IP 20
Mating interface LC duplex with two fibres
Temperature range -40 °C … +70 °C
Device side
Adapter
Multimode GOF
Singlemode GOF
Connector
LC duplex
Multimode GOF
Singlemode GOF
02
11
PushPull
HARTING PushPull Hybrid
type acc. to IEC 61 076-3-106 variant 4
Advantages Technical characteristics
Structure Hybrid cable
Data: 4x AWG26/7
Power: 3x AWG20/7
HARTING PushPull Hybrid
In the future all new machine generations will be
equipped with F ast Ethernet, no matter if PROFINET,
Ethernet/IP, P owerlink, Ethercat, V aran or other Ether-
netprofiles.
With the change of the communication technology
also the possibility is offered of simplifying the machine
installation and of introducing an innovative Hybrid
installation concept. This simplification will unite by
data and 24 V (5 A)-supply in a Hybrid cable, at least
with the space requirement of a M12-connector.
For this new installation solution HARTING with the
HAR TING PushPull Hybrid offers the trend-setting in-
stallation technology.
Everything is halved: the number of pluggings, the
number of cables and the space requirement for the
connection technology. Everything becomes simpler :
the installation, attaching and safe plugging.
The Hybrid connectors were developed particu-
lar under the criteria of simple attaching in the field
and the particular safe data communication with
the patented omega screen concept. As contacts
D-Sub and HDD Sub contacts worked w orld-wide are
used. This sock et pin contact system ensures highest
reliability and optimal shock and vibration stability.
With the optional available coding pins 6 different
codings can be realized.
This connector is available in the variants straight or
angled as well as for field assembling or o vermolded.
Advantages
l Compact, space-saving design
l Very compact housing
with high degree of protection
l Polarisation with nose
l Sixfold codable
Typical application areas
l Factory and building automation
l Industrial electronics
l Telecommunication and wireless networks
l Transportation
l Industrial monitoring and camera systems
l Lighting and display technology
l Access control systems
Recommended pin assignment
l Power contacts
Contact Function
Conductor colour
1 V + Red
2 Ground Brown
3 V + (switched) Yellow
l Data contacts
Contact Signal Function
Conductor
colour
4 RD – Receiver Data – Blue
5 RD + Receiver Data + White
6 TD – Transmission Data – Orange
7 TD + Transmission Data + Yellow
HARTING PushPull Hybrid
02
12
PushPull
HARTING PushPull Hybrid, type acc. to IEC 61 076-3-106 variant 4
device side
Advantages Technical characteristics
Identification Part No. Drawing Dimensions in mm
l Combined data- and power-supply
up to 5 A / 48 V included to one connector
l HARTING PushPull technology
l Compact design
l High packing density
l Sixfold codable
l Suitable for all Fast-Ethernet variants
Locking PushPull Technology
acc. to IEC 61 076-3-106 variant 4
Degree of protection IP 65 / IP 67
Termination Solder pins
Transmission
Category 5 / Class D
performance
up to 100 MHz acc. to
ISO/IEC 11 801:2002,
EN ISO 50 173-1
Transmission rate 10 / 100 Mbit/s
Number of contacts Data: 4, shielded (Ethernet)
Power: 3, (5 A / 48 V)
Housing material Plastic, black
Flammability
acc. to UL 94 V 0
Components device side
Set straight
HARTING PushPull Hybrid housing
bulkhead mounting and pcbs female
shielded, IP 65 / IP 67, black, 180°
straight
Set angled
HARTING PushPull Hybrid housing
bulkhead mounting and pcbs female
shielded, IP 65 / IP 67, black, 90°
angled
Female insert
PCB jack
shielded 180° straight
PCB jack
shielded 90° angled
Housing bulkhead mounting
for female insert straight
for female insert angled
Panel feed-through
1 x Hybrid female IP 65 / IP 67 on
1 x RJ45 female and 3 pcb clamps,
board drillings for M2.5
09 45 245 1300
09 45 245 1310
09 45 545 1300
09 45 545 1305
09 45 545 1320
09 45 545 1325
09 45 245 1320
HARTING PushPull Hybrid
02
13
PushPull
09 45 145 1300
09 45 845 1300
09 99 000 0596
09 99 000 0175
09 99 000 0513
09 99 000 0171
HARTING PushPull Hybrid, type acc. to IEC 61 076-3-106 variant 4
Hybrid connector
Advantages Technical characteristics
Connector
HARTING PushPull Hybrid connector,
IP 65/ 67, black,
with cable gland and crimp contacts
straight
Accessories – Coding pin set
to avoid accidental incorrect mating
a coding system is required.
This coding pins are inserted without
loss of contact.
Tools
Crimping tool for data contacts
Crimping tool for power contacts
Insertion
and removal tool
for data contacts
for power contacts
Identification Part No. Drawing Dimensions in mm
l Combined data- and power-supply
up to 5 A / 48 V included to one connector
l HARTING PushPull technology
l Compact design
l High packing density
l Sixfold condable
l Suitable for all Fast-Ethernet variants
Locking PushPull Technology
acc. to IEC 61 076-3-106 variant 4
Degree of protection IP 65 / IP 67
Termination Crimp
Cable diameter AWG 26 for Ethernet
AWG 20 for Power
Transmission
Category 5 / Class D
performance
up to 100 MHz acc. to
ISO/IEC 11 801:2002,
EN ISO 50 173-1
Number of contacts Data: 4, shielded (Ethernet)
Power: 3, (5 A / 48 V)
Housing material Plastic, black
Flammability
acc. to UL 94 V 0
HARTING PushPull Hybrid
02
14
PushPull
HARTING PushPull Hybrid, type acc. to IEC 61 076-3-106 variant 4
overmoulded Hybrid system cables
Advantages Technical characteristics
System cables
2x HARTING PushPull Hybrid
Length 0.5 m 09 47 616 1005
1 m 09 47 616 1010
2 m 09 47 616 1020
3 m 09 47 616 1030
5 m 09 47 616 1050
10 m 09 47 616 1100
20 m 09 47 616 1200
System cables
1x HARTING PushPull Hybrid,
second side open
Length 0.5 m 09 47 610 0005
1 m 09 47 610 0010
2 m 09 47 610 0020
3 m 09 47 610 0030
5 m 09 47 610 0050
10 m 09 47 610 0100
20 m 09 47 610 0200
Hybrid cable
ring 20 m 09 45 600 0331
ring 50 m 09 45 600 0341
ring 100 m 09 45 600 0301
reel 500 m 09 45 600 0321
Identification Part No. Drawing Dimensions in mm
l Combined data- and power-supply
up to 5 A / 48 V included to one connector
l HARTING PushPull technology
l Robust design, suitable for industrial applications
l High packing density
l Sixfold codable
l Suitable for all Fast-Ethernet variants
HARTING PushPull Hybrid
Cable construction: Twisted Pair shielded
+ 3 Power cables
Core structure Data: 4x AWG 26/7
Power: 3x AWG 20/7
Transmission
Category 5 / Class D
performance
up to 100 MHz acc. to
ISO/IEC 11 801:2002,
EN ISO 50 173-1
Sheath material FRNC
Cable-
outer diameter ø (7.0 ±0.4) mm
Shielding Shielding foil
and shielding braid
Temperature range -40 °C … +80 °C
Colour black
Structure Hybrid cable
02
15
PushPull
09 45 145 9010
HARTING PushPull Signal
HARTING PushPull Signal
Identication PartNo. Drawing Dimensionsinmm
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Forthetransmissionofanalog,lowvoltage
and bus signals
• Fullyshielded
• 10contacts
• Touch-proof
• Easyandfastcableinstallation
Locking PushPulltechnology
acc.toIEC61076-3-106variant4
Degreeofprotection IP65/IP67
Matingface acc.toIEC/PAS61076-3-11x
Numberofcontacts 10
Electricaldata
acc.toDINEN61984 5A 100V 1.5kV 3
Contactresistance 10mΩ
Termination Crimp
Conductorcrosssection 0.75mm²
Conductordiameter max.2.1mm
Outercablediameter 6.5…9.5mm
Shielding
Fullyshielded,360°shieldingcontact
Matingcycles min.500
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Zincdie-cast,nickel-plated
Flammabilityacc.toUL94 V0
HARTINGPushPull,typeacc.toIEC61076-3-106variant4
10-poles100V/5A
Connectorset10-poles
incl. plastic housing
andfemaleinsert
OrderD-Subcrimpfemale
contactsseparately
available
Q3 / 2012
02
16
PushPull
HARTING PushPull Signal
09 45 545 0032
09 45 545 0028
096700082781)
096700034762)
096700081781)
096700035762)
EasyInstall
Compact
09 45 545 9010
HARTING PushPull Signal
Identication PartNo. Drawing Dimensionsinmm
1)Tobeusedwithcrimptool09990000175
2)Tobeusedwithcrimptool09990000501.Suitablelocator:61036000531
HARTING PushPull
housingbulkheadmounting,
plastic
D-Subcrimpcontacts
(Female)
forAWG24-20;0.25-0.56mm²
forAWG22-18;0.33-0.82mm²
(Male)
forAWG24-20;0.25-0.56mm²
forAWG22-18;0.33-0.82mm²
Insertforpanelfeed-through
HIFF,10-poles
incl.maleinsert
OrderD-Subcrimpmale
contactsseparately
02
17
PushPull
09 45 541 1900
09 45 541 1902
09 45 541 1905
HARTING PushPull USB
Advantages Technical characteristics
Identification Part No. Drawing Dimensions in mm
HARTING PushPull USB
Components device side and panel feed-throughs
Components device side
USB 2.0 type B
Solder jack, angled 90°, THT
Adapter PCB USB 2.0 type A
Jack to pin header
Adapter PCB USB 3.0 type A
Jack to pin header
l HARTING PushPull technology
l Compact, space-saving design for the device
integration of USB jacks
l USB 2.0 and 3.0 compatible
Mating face USB 2.0 type B and
USB 2.0 / 3.0 type A
Number of contacts USB 2.0: 4 and USB 3.0: 9
Degree of protection IP 65 / IP 67
Mating cycles min. 750
Temperature range -40 °C … +70 °C
All solder jacks and adapter PCB‘s are suitable for the HARTING PushPull bulkhead mounting housings
09 45 545 0021 / … 0023 / … 0029 / … 0030 / … 0031 / … 0033 (see page 02.04)
02
18
PushPull
09 45 245 1903
09 45 245 1905
09 45 245 1902
09 45 245 1904
HARTING PushPull USB
Advantages Technical characteristics
Identification Part No. Drawing Dimensions in mm
HARTING PushPull USB
Panel feed-throughs
Panel feed-throughs
EasyInstall style
USB 2.0 type A
2 x jack
USB 3.0 type A
2 x jack
Compact style
USB 2.0 type A
2 x jack
USB 3.0 type A
2 x jack
l HARTING PushPull technology
l Compact, space-saving design for the device
integration of USB jacks
l USB 2.0 and 3.0 compatible
Mating face USB 2.0 / 3.0 type A
Number of contacts USB 2.0: 4 and USB 3.0: 9
Degree of protection IP 65 / IP 67
Mating cycles min. 750
Temperature range -40 °C … +70 °C
02
19
PushPull
09 45 145 3902
09 45 145 1902
09 45 145 2902
09 45 145 3912
09 45 145 1912
09 45 145 2912
HARTING PushPull USB
Advantages Technical characteristics
HARTING PushPull USB
System cables
System cables
2 x PushPull USB
Length 1.5 m
USB 2.0 type B
USB 2.0 type A
USB 3.0 type A
System cables
1 x PushPull USB
1 x IP 20 USB
Length 1.5 m
USB 2.0 type B
USB 2.0 type A
USB 3.0 type A
Other types and lengths on request
Identification Part No. Drawing Dimensions in mm
l HARTING PushPull technology
l Compact, space-saving design for the device
integration of USB jacks
l USB 2.0 and 3.0 compatible
l Fully shielded, 360° shielding contact
l Robust design, suitable for industrial applications
Mating face USB 2.0 type B and
USB 2.0 / 3.0 type A
Number of contacts USB 2.0: 4 and USB 3.0: 9
Degree of protection IP 65 / IP 67
Mating cycles min. 750
Temperature range -40 °C … +70 °C
02
20
PushPull
HARTING PushPull Power – Introduction
HARTING offers with the HARTING PushPull Power
connector an universal solution for the power supply
in compact and robust applications. It is in its element
whereever small dimensions are combined with a
high protection class.
The connector is available in a 4-pole 48 V and a
2-pole 250 V version. The power contacts can carry
up to 12 rsp. 16 A each (see deratings). In spite of
this high current carrying capacity the connector gets
by with minimal dimensions and fulfils the industrial
requirements for clearances and creepage distances
at eht same time (pollution degree 3 and over voltage
category III).
Additionally the HAR TING PushPull Pow er connector
offers the protection class of IP 67 and 65. Beside
numerous industrial use cases it is thereby suited for
div erse applications in the fields of transportation and
telecommunication.
The cable side of the HARTING PushPull Power is
terminated with crimping technology. F or the recepta-
cle several solutions with diff erent termination techno-
logies are offered.
Regulations l VDE 0110
l DIN EN 61 984
Advantages
l Minimum space requirements in spite of high current
carrying capacity
l Very compact housing in a high protection class
l Protection against contact on plug AND receptacle
side enables an easy and safe installation
l For low voltage (48 V) and for power supply (250 V)
available
l Codeable without losing contacts
l Different termination technologies for individual
device integration
Typical application areas
l Factory and building automation
l Industrial electronics
l Telecommunication and wireless networks
l Transportation
l Industrial monitoring and camera systems
l Lighting and display technology
l Access control systems
Current carrying capacity
The current carrying capacity is determined in tests
which are conducted on the basis of the DIN IEC
60 512-5-2. The current carrying capacity in limited by
the thermal properties of materials which are used for
inserts as well as by the insulating materials. These
components have a limiting temperature which should
not be exceeded.
Example of a current capacity curve
Permissible upper limiting temperature
set by applied materials
basic curve
corrected curve
permissible
operation
range
Upper current
limit set by
external factors,
i.e. connectable
wire gauge, given
current limit
Derating-Diagramm for low voltage, 48 V; 4x 12 A
Ambient temperature [°C]
Derating-Diagramm for power supply, 250 V; 2x 16 A
Ambient temperature [°C]
02
21
PushPull
HARTING PushPull Power
09 46 245 4430
09 46 295 44301)
09 46 245 4030
09 46 295 40301)
09 46 245 4031
09 46 295 40311)
09 46 245 4400
09 46 245 4000
09 46 245 4001
09 46 500 4400
09 46 500 4402
09 46 500 4401
HARTING PushPull Power 4/0, type acc. to IEC 61 076-3-106 variant 4
panel feed-throughs 4-poles 48 V / 12 A
Advantages Technical characteristics
Identification Part No. Drawing Dimensions in mm
l Power connectors for devices
l EasyInstall and Compact panel feed-through and
females for simple device integration
l Compact, space-saving design
l Touch-proof according to IEC DIN EN 60 529
l Polarisation with nose
l Device side: female with cable cage, crimp or
solder termination
l 4 different coding variants without loss of contact
Locking PushPull Technology
acc. to IEC 61 076-3-106 variant 4
Degree of protection IP 65 / IP 67
Number of contacts 4
Electrical data
acc. to EN 61 984 12 A 48 V 1.5 kV 3
Termination Crimp
Termination cross section 0.75 - 2.5 mm²
(AWG 20 - 12) stranded
Termination Solder pins
Termination diameter 1.6 mm
Termination Cable cage
Termination cross section 0.75 - 2.5 mm²
(AWG 20 - 12) stranded
Mating cycles min. 750
Temperature range -40 °C … +70 °C
Housing material Plastic, black
Flammability acc. to UL 94 V 0
Panel cut outs see page 02.04
1) Metal version (without contacts)
Panel feed-through set
Housing bulkhead mounting EasyInstall
with 4 turned female contacts and
insulation body
with crimp termination for 1.5 mm²
with solder termination, 90° angled
with cage clamp terminal on pcb
Housing bulkhead mounting Compact
with 4 turned female contacts and
insulation body
with crimp termination for 1.5 mm²
with solder termination, 90° angled
with cage clamp terminal on pcb
Power-female with solder termination
4-poles, 48 V / 12 A, 90° angled
4-poles, 48 V / 12 A, 90° straight
Power-female with crimp termination
02
22
PushPull
09 46 145 4400
09 46 195 44001)
09 46 145 4401
09 46 500 0403
09 46 500 0401
09 46 500 0405
09 46 500 0404
09 46 500 0402
09 46 500 0406
09 46 840 0000
HARTING PushPull Power
HARTING PushPull Power 4/0, type acc. to IEC 61 076-3-106 variant 4
connector 4-poles 48 V / 12 A
Advantages Technical characteristics
Connector set
incl. 4 turned crimp contacts (male)
for 1.5 mm², insulation body, housing,
cable gland
Connector set
without contacts
Accessories – crimp contacts male
0.75 mm² (AWG 20 - 18)
1.5 mm² (AWG 16 - 14)
2.5 mm² (AWG 12)
Accessories – crimp contacts female
0.75 mm² (AWG 20 - 18)
1.5 mm² (AWG 16 - 14)
2.5 mm² (AWG 12)
Accessories – Coding pin set
to avoid accidental incorrect mating
a coding system is required.
This coding pins are inserted without
loss of contact.
Identification Part No. Drawing Dimensions in mm
l Power connectors for devices
l EasyInstall panel feed-through for simple device
integration
l Compact, space-saving design
l Touch-proof according to IEC DIN EN 60 529
l Polarisation with nose
l Cable side: Male with crimp termination
l 4 different coding variants without loss of contact
Locking PushPull Technology
acc. to IEC 61 076-3-106 variant 4
Degree of protection IP 65 / IP 67
Number of contacts 4
Electrical data
acc. to EN 61 984 12 A 48 V 1.5 kV 3
Cable diameter 4.9 ... 8.6 mm
Termination Crimp
Termination cross section 0.75 - 2.5 mm²
(AWG 20 - 12) stranded
Mating cycles min. 750
Temperature range -40 °C … +70 °C
Housing material Plastic, black
Flammability acc. to UL 94
V 0
1) Metal version (without contacts)
02
23
PushPull
09 46 245 3430
09 46 245 3410
09 46 500 3401
09 46 145 3410
09 46 145 3411
09 46 840 0000
HARTING PushPull Power
HARTING PushPull Power 2/0, type acc. to IEC 61 076-3-106 variant 4
panel feed-through and connector, 3-poles, 250 V / 16 A
Advantages Technical characteristics
HARTING PushPull Power 2/0
Panel feed-through set
incl. 3 turned crimp contacts (female) for
1.5 mm², insulation body (black), housing
bulkhead mounting EasyInstall
Panel feed-through set
incl. 3 turned contacts (female) for 1.5 mm²,
insulation body (black), housing bulkhead
mounting, with crimp termination
Power-female with crimp termination
without contacts
Connector set
incl. 3 turned crimp contacts (male)
for 1.5 mm², insulation body (black),
housing, cable gland
Connector set
without contacts
Coding pin set
to avoid accidental incorrect mating
a coding system is required.
This coding pins are inserted without
loss of contact.
Identification Part No. Drawing Dimensions in mm
l Power connectors for devices
l EasyInstall panel feed-through for simple device
integration
l Compact, space-saving design
l Touch-proof according to IEC DIN EN 60 529
l Polarisation with nose
l Cable side: Male with crimp termination
l Device side: female with crimp termination
l 4 different coding variants without loss of contact
Locking PushPull Technology
acc. to IEC 61 076-3-106 variant 4
Degree of protection IP 65 / IP 67
Number of contacts 2 + PE
Electrical data
acc. to EN 61 984 16 A 250 V 4 kV 3
Cable diameter 4.9 ... 8.6 mm
Termination Crimp
Termination cross section 0.75 - 2.5 mm²
(AWG 20 - 12) stranded
Mating cycles min. 750
Temperature range -40 °C … +70 °C
Housing material Plastic, black
Flammability acc. to UL 94
V 0
Crimp contacts see page 02.22
Panel cut outs see page 02.04
02
24
PushPull
HARTING PushPull Power
Identification Part No.
For wire gauges
0.08 … 4.0 mm²
(AWG 28 … 12).
Insertion tool 09 46 800 0099
Extraction tool 09 46 800 0098
For an easy insertion and
extraction of the male and
female crimp contacts into /
out of the insulator body.
Tooling
mm² AWG N
Tensile strength of crimped connections
Conductor cross-section Tensile strength
0.08 28 11
0.12 26 15
0.14 18
0.22 24 28
0.25 32
0.32 22 40
0.50 20 60
0.75 85
0.82 18 90
1.00 108
1.30 16 135
1.50 150
2.10 14 200
2.50 230
3.30 12 275
4.00 310
Extract from DIN IEC 60352-2, Amend. 2, Table IV
Crimp connection
A perfect crimp connection is gastight, therefore corrosion free
and amounts to a cold weld of the parts being connected. F or this
reason, major features in achieving high quality crimp connec-
tions are the design of the contact crimping par ts and of course
the crimping tool itself. Wires to be connected must be carefully
matched with the correct size of crimp contacts. If these basic
requirements are met, users will be assured of highly reliable
connections with low contact resistance and high resistance to
corrosive attack.
The economic and technical advantages are:
● Constant contact resistance as a result of precisely repeated
crimp connection quality
● Corrosion free connections as a result of cold weld action
● Pre-preparation of cable forms with crimp contacts fitted
● Optimum cost cable connection
Requirements for crimp connectors are laid down in DIN IEC
60352-2, Amend. 2, as illustrated in the table.
Pull out force of stranded wire
The main criterion to judge the quality of a crimp connection is
the retention force achieved by the wire conductor in the terminal
section of the contact. DIN IEC 60352, part 2, defines the
extraction force in relation to the cross-section of the conductor.
When fitted using HARTING crimping tools and subject to their
utilization in an approved manner, our crimp connectors comply
with the required extraction forces.
Crimping tools
Crimping tools (hand operated or automatic) are carefully designed
to produce with high pressure forming parts a symmetrical con-
nection of the crimping part of the contact and the wire being
connected with the minimum increase in size at the connection
point. The positioner automatically locates the crimp and wire at
the correct point in the tool.
A ratchet in the tool performs 2 functions:
➀ It prevents insertion of the crimp into the tool for crimping before
the jaws are fully open
➁ It prevents the tool being opened before the crimping action is
completed
Identical, perfectly formed, connections can be produced using
this crimping system.
Crimp-cross section
HARTING crimp profile
HARTING PushPull Power
8-indent crimping tool incl. positioner 09 46 800 0000
Locator HARTING PushPull Power
contacts for Buchanan crimping tool
(09 99 000 0001) 09 46 800 0010
02
25
PushPull
HARTING PushPull
Identification Part No. Drawing Dimensions in mm
Transport protecion
for device side
IP 40 09 45 845 0003
Protection cover
for device side
IP 65 / IP 67
Version with passive locking
without cord 09 45 845 0009 024
Version with passive locking
with plastic cord
for fixing screw M3 09 45 845 0009
Version with passive locking
with nylon cord
for fixing screw M2.5 / M3 09 45 845 0011 024
Version with active locking
without cord 09 45 845 0015
Version with active locking
with plastic cord
for fixing screw M3 09 45 845 0014
Version with active locking
with nylon cord
for fixing screw M2.5 / M3 09 45 845 0013
Protection cover
for connectors
IP 65 / IP 67 09 45 845 0010
Security clip
for connectors
can be sealed and protects against
unauthorized unplugging 09 45 845 0020
Accessories
02
26
PushPull
09 45 345 0000
09 45 345 0001
09 45 545 0028
09 45 245 9010
20 82 001 0001
09 45 545 1562
09 45 545 1561
09 45 545 1120
09 45 545 9010
HARTING PushPull
Identication PartNo. Drawing Dimensionsinmm
HARTINGPushPull,typeacc.toIEC61076-3-106variant4
cable to cable housing
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Idealforprototyping
• Canbecombinedwithpanelfeed-throughs
forpower,dataandsignal
Locking PushPulltechnology
acc.toIEC61076-3-106variant4
Degreeofprotection IP65/IP67
Outercablediameter 6.5…9.5mm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
Suitable bulkhead
housing,plastic
forRJ45/Signal
*OrderD-Subcrimpmalecontactsseparately(seepage02.16)
foroutercablediameter
6.5…9.5mm
HARTING PushPull
cabletocablehousings,
plastic
(Orderhousingbulkheadmounting
andinsertseparately)
HARTING PushPull
bulkheadhousings,
plastic
(Orderhousingbulkheadmounting
andinsertseparately)
Inserts
forRJ45/Signal
RJ45:8-poles,Cat.6/classEA
Ha-VispreLink®setAWG22/23
HARTINGRJIndustrial®
cablejackwithIDCtermination
AWG22-24,8-poles
AWG24-28,8-poles
AWG22-24,4-poles,Cat.5
Signal:10-poles,60V/3A*
available
Q2 / 2012
Suitable HARTING
PushPull Signal
panelfeed-through
Accessories
02
27
PushPull
09 35 002 0321
09 35 002 2101
09 35 002 2102
09 35 002 5402
09 35 002 5401
TechnicalcharacteristicsFeatures
Han®PushPull,typeacc.toIEC61076-3-117variant14
HousingbulkheadmountingfordeviceintegrationandRJ45jacks
Identication PartNo. Drawing Dimensionsinmm
• HARTINGPushPulltechnology
• Compactdesign
• Highpackingdensity
• Deviceintegrationvia
RJ45PCBconnectors
Locking PushPulltechnology
acc.toIEC61076-3-117
Degreeofprotection IP65/IP67
Matingface RJ45acc.toIEC60603-7
Terminationtype Jackwithsoldertermination
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
Panel cut out
PCBlayout
Seal
Housing bulkhead mounting
plastic
RJ45 jack
Soldervariant,90°angled
Componentsdeviceside
Soldervariant,180°straight
DustprotectioncoverIP40
rubber(NBR)
Han® PushPull RJ45 Plastic
ProtectioncoverIP65/IP67
02
28
PushPull
09 35 221 0331
09 35 222 0331
09 35 223 0331
Han® PushPull RJ45
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-117variant14
RJ45panelfeedthrough
Han® PushPull RJ45 Plastic
Panel cut out
PanelfeedthroughCat.5
including housing and
printedboard
with2xRJ45jack
horizontallymounted
PanelfeedthroughCat.5
including housing and
printedboard
withRJ45jackandSEKboard
PanelfeedthroughCat.5
including housing and
printedboard
withRJ45jackand
RJ45jackverticallymounted
intheIP20range
Panel cut out
Panel cut out
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Compactdesign
• Highpackingdensity
• Deviceintegrationvia
RJ45PCBconnectors
Locking PushPulltechnology
acc.toIEC61076-3-117
Degreeofprotection IP65/IP67
Matingface RJ45acc.toIEC60603-7
Transmissionperformance acc.toISO/IEC11801:2002,
EN50173-1,category5/classD
upto100MHzresp.category6/
classEAupto500MHz
Transmissionrate 10/100Mbit/sand1/10Gbit/s
Numberofcontacts 8
Shielding Fullyshielded,360°shielding
contact(Cat.6)
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
02
29
PushPull
09 35 224 0331
09 35 226 0331
09 35 225 0331
09 35 012 0331
20 82 001 0001
09 45 545 1562
09 45 545 1561
09 45 545 1120
Identication PartNo. Drawing Dimensionsinmm
Han® PushPull RJ45 Plastic
Recommendationforfemaleinsertandassemblymanualonrequest.
PanelfeedthroughCat.5
including housing and
printedboard
withRJ45jackand
47°jackverticallymounted
intheIP20range
PanelfeedthroughCat.5
including housing and
printedboard
withRJ45jackand
soldertermination
intheIP20range
PanelfeedthroughCat.6
including housing and
HARTINGRJIndustrial® 10G
RJ45 bulkhead
Panelfeedthrough
tomountHIFFinserts,e.g.
Ha-VISpreLink®RJ45-module
Orderinsertsseparately
Panel cut out
Panel cut out
Panel cut out
Panel cut out
Ha-VISpreLink® set
RJ45jackAWG22/23
consistsof:
•1xHa-VISpreLink® module
RJ45 jack
•1xHa-VISpreLink®terminal
module
•1xcabletie
see page 01.10
HARTINGRJIndustrial®
cable jack
AWG22-24,8-poles,Cat.6
AWG24-28,8-poles,Cat.6
AWG22-24,4-poles,Cat.5
02
30
PushPull
09 35 221 0421
09 35 222 0421
09 35 226 0421
09 35 225 0421
Han®PushPull,typeacc.toIEC61076-3-117variant14
RJ45connector
Han® PushPull RJ45 Plastic
TechnicalcharacteristicsFeatures
Connectorset,
plastic
incl. housing
andmaleinsert
Han®RJIndustrial
Category5,4-poles,IDCcontacts
6.5-9.5mmclamprange
5-8mmclamprange
Han®RJIndustrialPN
Category5,4-poles,IDCcontacts
6.5-9.5mmclamprange
PROFINET-Identication:
PROFINETO-PlugRJ45
Han®RJIndustrial10G
Category6,8-poles,IDCcontacts
6.5-9.5mmclamprange
Identication PartNo. Drawing Dimensionsinmm
•HARTINGPushPull
technology
•Field-assemblyconnector
withIDCcontacts
•Fullyshielded
Locking PushPulltechnologyacc.toIEC61076-3-117
Degreeofprotection IP65/IP67
Matingface RJ45acc.toIEC60603-7
Shielding Fullyshielded,360°shieldingcontact
Numberofcontacts 4respectively8
Transmissionperformance acc.toISO/IEC11801:2002,EN50173-1,category5/
classDupto100MHz,category6/classEAupto500MHz
Transmissionrate 10/100Mbit/sand1/10Gbit/s
Termination withIDCcontacts,notoolsneeded/eld-assembly
forCat.5 Conductorcrosssection AWG24/7-22/7(stranded)
AWG23/1-22/1(solid)
Cablediameter 1.6mm
forCat.6 Conductorcrosssection AWG22/7-27/7(stranded)
AWG22/1-27/1(solid)
Cablediameter 1.6mm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black,UL94V-0
02
31
PushPull
09 35 223 0421
09 35 224 0421
09 35 227 0421
Han®PushPull,typeacc.toIEC61076-3-117variant14
RJ45connector
Han® PushPull RJ45 Plastic
TechnicalcharacteristicsFeatures
Identication PartNo. Drawing Dimensionsinmm
Connectorset,
plastic
incl. housing
andmaleinsert
5-8mmclamprange
Han®RJIndustrial
Category6,8-poles,
piercingcontacts
Wiremanager,white
Wiremanager,blue
•HARTINGPushPull
technology
•Field-assemblyconnector
withpiercingcontacts
•Fullyshielded
Locking PushPulltechnologyacc.toIEC61076-3-117
Degreeofprotection IP65/IP67
Matingface RJ45acc.toIEC60603-7
Shielding Fullyshielded,360°shieldingcontact
Numberofcontacts 8
Transmissionperformance acc.toISO/IEC11801:2002,EN50173-1,
category6/classEupto250MHz
Transmissionrate 10/100/1000Mbit/s
Termination withpiercingcontacts
Conductorcrosssection AWG24/7-27/7(stranded)
Cablediameter 1.05mm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black,UL94V-0
New Cat. 6A version
(available Q3/2012)
02
32
PushPull
09 35 002 0301
09 35 002 2101
09 35 002 2102
09 35 002 5402
09 35 002 5401
TechnicalcharacteristicsFeatures
Han®PushPull,typeacc.toIEC61076-3-117variant14
HousingbulkheadmountingfordeviceintegrationandRJ45jacks
Identication PartNo. Drawing Dimensionsinmm
• HARTINGPushPulltechnology
• Compactdesign
• Highpackingdensity
• Deviceintegrationvia
RJ45PCBconnectors
Locking PushPulltechnology
acc.toIEC61076-3-117
Degreeofprotection IP65/IP67
Matingface RJ45acc.toIEC60603-7
Terminationtype Jackwithsoldertermination
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Zincdie-cast,nickelplated
Panel cut out
PCBlayout
Seal
Housing bulkhead mounting
metal
RJ45 jack
Soldervariant,90°angled
Componentsdeviceside
Soldervariant,180°straight
ProtectioncoverIP65/IP67
DustprotectioncoverIP40
rubber(NBR)
Han® PushPull RJ45 Metal
02
33
PushPull
09 35 221 0311
09 35 222 0311
09 35 223 0311
Han® PushPull RJ45
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-117variant14
RJ45panelfeedthrough
Han® PushPull RJ45 Metal
Panel cut out
PanelfeedthroughCat.5
including housing and
printedboard
with2xRJ45jack
horizontallymounted
PanelfeedthroughCat.5
including housing and
printedboard
withRJ45jackandSEKboard
PanelfeedthroughCat.5
including housing and
printedboard
withRJ45jackand
RJ45jackverticallymounted
intheIP20range
Panel cut out
Panel cut out
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Compactdesign
• Highpackingdensity
• Deviceintegrationvia
RJ45PCBconnectors
Locking PushPulltechnology
acc.toIEC61076-3-117
Degreeofprotection IP65/IP67
Matingface RJ45acc.toIEC60603-7
Transmissionperformance acc.toISO/IEC11801:2002,
EN50173-1,category5/classD
upto100MHz
Transmissionrate 10/100Mbit/s
Numberofcontacts 8
Shielding Fullyshielded,360°shielding
contact(Cat.6)
Terminationtype Femalewithsoldertermination
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Zincdie-cast,nickelplated
02
34
PushPull
09 35 224 0311
09 35 226 0311
Identication PartNo. Drawing Dimensionsinmm
Han® PushPull RJ45 Metal
Recommendationforfemaleinsertandassemblymanualonrequest.
PanelfeedthroughCat.5
including housing and
printedboard
withRJ45jackand
47°jackverticallymounted
intheIP20range
PanelfeedthroughCat.5
including housing and
printedboard
withRJ45jackand
soldertermination
intheIP20range
Panel cut out
Panel cut out
02
35
PushPull
09 35 225 0311
09 35 225 0312
Han®PushPull,typeacc.toIEC61076-3-117variant14
RJ4510Gpanelfeedthrough
Identication PartNo. Drawing Dimensionsinmm
• HARTINGPushPulltechnology
• Compactandrobustdesign
• 360°shielding
• RJ45matingcompatible
• Transmissioncategory6,performance
classEA,suitablefor1/10GigabitEthernet
• PROFINETconform
Locking PushPulltechnology
acc.toIEC61076-3-117variant14
Matingface RJ45acc.toIEC60603-7
Transmission
performance Category6/classEAacc.toISO/IEC
 11801:2002,EN50173-1
Transmissionrate 10/100Mbit/sand1/10Gbit/s
Shielding Fullyshielded,360°shieldingcontact
Mounting Screwabletocoverplates
Degreeofprotection IP65/IP67
Matingcycles min.750
Temperaturerange -40°C…+70°C
Housingmaterial Zincdie-cast,nickel-plated
Han® PushPull RJ45 10G
Panelfeedthrough,Cat.6
includingbulkheadhousingfor
rectangularpanelcutout,atseal
andHARTINGRJIndustrial®
10GRJ45bulkhead,isolated
bulkheadxture
Panelfeedthrough,Cat.6
includingbulkheadhousingfor
circularpanelcutout,atsealand
HARTINGRJIndustrial®
10GRJ45bulkhead,isolated
bulkheadxture
Han® PushPull RJ45 10G Metal
TechnicalcharacteristicsFeatures
02
36
PushPull
09 35 012 0311
09 35 012 0312
20 82 001 0001
09 45 545 1562
09 45 545 1561
09 45 545 1120
Identication PartNo. Drawing Dimensionsinmm
Han® PushPull RJ45 10G
Panelfeed-through
tomountHIFFinserts,
e.g.Ha-VISpreLink®RJ45-module,
RJIndustrialcablejack
Orderinsertsseparately
Bulkheadhousingforrectangular
panelcutout,incl.plasticadapter
Bulkheadhousingforcircular
panelcutout,incl.plasticadapter
andxingnut
Ha-VISpreLink® set
RJ45jackAWG22/23
HARTINGRJIndustrial®
cable jack
consistsof:
•1xHa-VISpreLink® module
RJ45 jack
•1xHa-VISpreLink®terminal
module
•1xcabletie
AWG22-24,8-poles,Cat.6
AWG24-28,8-poles,Cat.6
AWG22-24,4-poles,Cat.5
Han® PushPull RJ45 10G Metal
02
37
PushPull
09 35 221 0501
Han® PushPull RJ45 Genderchanger Metal
Cat. 6 / Class E
Han® PushPull RJ45 Metal
Han® PushPull RJ45
Genderchanger metal
including housing and printed board
with 2 x RJ45 jack
Identification Part No. Drawing Dimensions in mm
l High degree of protection IP 65 / IP 67
l Robust metal housing
l Standard PROFINET component of the German
automotive production
l Allows usage of different cable types (Type B, C)
e.g. in robots application
l Extension of cords according to PROFINET
guideline
l Can be count as one connection
acc. to IEC 11 801 Chapter 10.2.4
Transmissionperformance Cat.6/ClassEupto250MHz
Connector Han® PushPull RJ45
(PROFINETconform)
Locking PushPulltechnology
acc.toIEC61076-3-117
variant14
Matingface RJ45acc.toIEC60603-7
Matingcycles min.750
Housingmaterial Aluminiumanodized
Dimensions 83.2x62x25.2mm(unmated)
Degreeofprotection
acc.toDIN60529 IP65/IP67(mated)
Mounting Wallmountablewith4screws
(typeM5)
Temperaturerange -20°C...+70°C
Maximumpermissible
humidity 30%...95%
(no condensation)
TechnicalcharacteristicsFeatures
02
38
PushPull
09 35 221 0401
09 35 226 0401
09 35 225 0401
Han® PushPull, type acc. to IEC 61 076-3-117 variant 14
RJ45 connector
Features Technicalcharacteristics
Connector set,
metal
incl. housing
and male insert
4 - 11 mm clamp range
Han® RJ Industrial
Category 5, 4-poles, IDC contacts
Han® RJ Industrial PN
Category 5, 4-poles, IDC contacts
PROFINET-Identification:
PROFINET O-Plug RJ45
Han® RJ Industrial 10G
Category 6, 8-poles,
IDC contacts
Identification Part No. Drawing Dimensions in mm
• HARTING PushPull technology
• Field-assembly connector
with IDC contacts
• Fully shielded
Locking PushPulltechnologyacc.toIEC61076-3-117
Degreeofprotection IP65/IP67
Matingface RJ45acc.toIEC60603-7
Shielding Fullyshielded,360°shieldingcontact
Numberofcontacts 4respectively8
Transmissionperformance acc.toISO/IEC11801:2002,EN50173-1,
category5/classDupto100MHz
category6/classEAupto500MHz
Transmissionrate 10/100Mbit/sand1/10Gbit/s
Termination withIDCcontacts,notoolsneeded/
field-assembly
forCat.5
Conductorcrosssection AWG24/7-22/7(stranded)
AWG23/1-22/1(solid)
Cablediameter 1.6mm
forCat.6
Conductorcrosssection AWG22/7-27/7(stranded)
AWG22/1-27/1(solid)
Cablediameter 1.6mm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Zincdie-cast,nickel-plated
Han® PushPull RJ45 Metal
02
39
PushPull
09 35 226 0402
09 35 226 0403
09 35 225 0402
09 35 225 0403
Han® PushPull, type acc. to IEC 61 076-3-117 variant 14
RJ45 connector angled
Features Technicalcharacteristics
Identification Part No. Drawing Dimensions in mm
Locking PushPulltechnologyacc.toIEC61076-3-117
Degreeofprotection IP65/IP67
Matingface RJ45acc.toIEC60603-7
Shielding Fullyshielded,360°shieldingcontact
Numberofcontacts 4respectively8
Transmissionperformance acc.toISO/IEC11801:2002,EN50173-1,
category5/classDupto100MHz
category6/classEAupto500MHz
Transmissionrate 10/100Mbit/sand1/10Gbit/s
Termination withIDCcontacts,notoolsneeded/
field-assembly
forCat.5
Conductorcrosssection AWG24/7-22/7(stranded)
AWG23/1-22/1(solid)
Cablediameter 1.6mm
forCat.6
Conductorcrosssection AWG22/7-27/7(stranded)
AWG22/1-27/1(solid)
Cablediameter 1.6mm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Zincdie-cast,nickel-plated
Han® PushPull RJ45 Metal
Connector set,
metal
incl. housing
and male insert
Han® RJ Industrial PN
Category 5, 4-poles, IDC contacts,
6.5 - 9.5 mm clamp range
Cable exit bottom side
Cable exit top side
Han® RJ Industrial 10G
Category 6, 8-poles, IDC contacts,
6.5 - 9.5 mm clamp range
Cable exit bottom side
Cable exit top side
• HARTING PushPull technology
• Angled cable exit 45° to the top /
bottom for a space saving cabling
• Field-assembly connector with IDC
contacts
• Fully shielded
02
40
PushPull
09 35 223 0401
09 35 224 0401
09 35 227 0401
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-117variant14
RJ45connector
Connectorset,
metal
incl. housing
andmaleinsert
4-11mmclamprange
Han®RJIndustrial
Category6,8-poles,
piercingcontacts
Wiremanager,white
Wiremanager,blue
Han® PushPull RJ45 Metal
TechnicalcharacteristicsFeatures
•HARTINGPushPulltechnology
•Compactdesign
•Forspacesavingttingconditions
•Connectorwithpiercingcontacts
•360°shielding
Locking PushPulltechnology
acc.toIEC61076-3-117
Degreeofprotection IP65/IP67
Matingface RJ45acc.toIEC60603-7
Shielding
Fullyshielded,360°shieldingcontact
Numberofcontacts 8
Transmissionperformance acc.toISO/IEC11801:2002,
EN50173-1,
category6/classEupto250MHz
Transmissionrate 10/100/1000Mbit/s
Termination withpiercingcontacts
Conductorcrosssection AWG24/7-27/7(stranded)
Cablediameter 1.05mm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Zincdie-cast,nickel-plated
New Cat. 6A version
(available Q3/2012)
02
41
PushPull
09 35 002 0431
09 35 002 0433
09 35 012 0331
20 82 001 0001
09 45 545 1562
09 45 545 1561
09 45 545 1120
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-117variant14
cable to cable housing
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Idealforprototyping
• Canbecombinedwithpanelfeed-throughs
forpower,dataandsignal
Locking PushPulltechnology
acc.toIEC61076-3-117variant14
Degreeofprotection IP65/IP67
Outercablediameter 6.5…9.5mm/9…13mm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
Panel cut out
foroutercablediameter
6.5…9.5mm
foroutercablediameter
9…13mm
Suitable bulkhead
housing,plastic
forRJ45
Han® PushPull
cabletocablehousings,
plastic
(Orderhousingbulkheadmounting
andinsertseparately)
InsertsforRJ45
RJ45:8-poles,Cat.6/classEA
Ha-VispreLink®setAWG22/23
HARTINGRJIndustrial®
cablejackwithIDCtermination
AWG22-24,8-poles
AWG24-28,8-poles
AWG22-24,4-poles,Cat.5
available
Q2 / 2012
Han® PushPullRJ45Accessories
02
42
PushPull
09 35 002 5401
09 35 002 5402
09 35 002 5402 XL
09 35 002 5403 XL
09 35 002 5412
09 35 002 5411
Han®PushPull,typeacc.toIEC61076-3-117variant14
Accessories
Identication PartNo. Drawing Dimensionsinmm
Han® PushPullRJ45Accessories
Han® PushPull dust
protectioncoverIP40
rubber(NBR)
fordeviceside
Han®PushPullprotection
coverIP65/IP67
fordeviceside
withxingcord 1 piece
100 pieces
withoutxingcord 100 pieces
Han® PushPull dust
protectioncoverIP40
forcableside
Han®PushPullprotection
coverIP65/IP67
forcableside
02
43
PushPull
09 35 002 0323
09 35 002 5401
09 35 002 5402
TechnicalcharacteristicsFeatures
Identication PartNo. Drawing Dimensionsinmm
• HARTINGPushPulltechnology
• Compactdesign
• Highpackingdensity
• Deviceintegrationviatransceiver
• Han®PushPullSCRJforPOF
isaccordingtherequirementsofAIDA
(GermanDomesticAutomobile
Manufacturers)
Locking PushPulltechnology
Degreeofprotection IP65/IP67
Matingface SCRJacc.toIEC61754-24
FiberTypen POF1) 1 mm
HCS®2) 200 µm/230µm
MM 62.5 µm/125µm
MM 50 µm/125µm
SM10µm/125µm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
Panel cut out
Seal
1)POF = Polymer-OpticalFibre
2)HCS® = HardCladSilica(registeredtrademarkof
SpecTranCorporation)
Han®PushPull,typeacc.toIEC61076-3-117variant14
Housingbulkheadmountingfordeviceintegration
OpticalconnectorbasedonSCRJ
Housing bulkhead mounting
Opticaltransceiver
not included
Componentsdeviceside
Referencefortransceiver
aswellasmountinginstruction
onrequest
DustprotectioncoverIP40
rubber(NBR)
ProtectioncoverIP65/IP67
plastic
Han® PushPullSCRJPlastic
02
44
PushPull
09 35 242 0333
09 35 002 4002
Han®PushPullSCRJ
20100015217
20 10 125 5211
20 10 230 5211
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Compactdesign
• Highpackingdensity
• Han®PushPullSCRJforPOF
isaccordingtherequirementsofAIDA
(GermanDomesticAutomobile
Manufacturers)
Locking PushPulltechnology
Degreeofprotection IP65/IP67
Matingface SCRJacc.toIEC61754-24
FiberTypen POF1) 1 mm
HCS®2) 200 µm/230µm
MM 62.5 µm/125µm
MM 50 µm/125µm
SM10µm/125µm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-117variant14
RJ45panelfeedthrough
foropticalconnectorbasedonSCRJ
Han® PushPullSCRJPlastic
Panelfeedthrough
SCcontactsorderseparately
Contacts
SCPOFcontact,1mm
SC125GIcontact
SC230HCScontact
SCRJIP20
POFconnector
Panel cut out
02
45
PushPull
09 35 241 0421
09 35 241 0422
20100015217
20 10 125 5211
20 10 230 5211
09 35 002 4002
09 35 002 5412
09 35 002 5411
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-117variant14
SCRJconnector
Han® PushPullSCRJPlastic
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Compactdesign
• Highpackingdensity
• Han®PushPullSCRJforPOF
isaccordingtherequirementsofAIDA
(GermanDomesticAutomobile
Manufacturers)
• Fieldinstallable
Locking PushPulltechnology
Degreeofprotection IP65/IP67
Matingface SCRJacc.toIEC61754-24
FiberTypen POF1) 1 mm
HCS®2) 200 µm/230µm
MM 62.5 µm/125µm
MM 50 µm/125µm
SM10µm/125µm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
Cablediameter 6.5-9.5mm
Connectorset,plastic
incl.housingandSCRJinsert,
POF contacts
incl.housingandSCRJinsert
SCcontactsorderseparately
PROFINET-Identication:
PROFINETO-PlugSCRJ
Contacts
SCPOFcontact,1mm
SC125GIcontact
SC230HCScontact
SCRJIP20
POFconnector
DustprotectioncoverIP40
ProtectioncoverIP65/IP67
Tooling see page 02.49
02
46
PushPull
09 35 002 0303
09 35 002 5401
09 35 002 5402
TechnicalcharacteristicsFeatures
Identication PartNo. Drawing Dimensionsinmm
• HARTINGPushPulltechnology
• Compactdesign
• Highpackingdensity
• Deviceintegrationviatransceiver
• Han®PushPullSCRJforPOF
isaccordingtherequirementsofAIDA
(GermanDomesticAutomobile
Manufacturers)
Locking PushPulltechnology
Degreeofprotection IP65/IP67
Matingface SCRJacc.toIEC61754-24
FiberTypen POF1) 1 mm
HCS®2) 200 µm/230µm
MM 62.5 µm/125µm
MM 50 µm/125µm
SM10µm/125µm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Zincdie-cast,nickelplated
Panel cut out
Seal
1)POF = Polymer-OpticalFibre
2)HCS® = HardCladSilica(registeredtrademarkof
SpecTranCorporation)
Han®PushPull,typeacc.toIEC61076-3-117variant14
Housingbulkheadmountingfordeviceintegration
OpticalconnectorbasedonSCRJ
Housing bulkhead mounting
Opticaltransceiver
not included
Componentsdeviceside
Referencefortransceiver
aswellasmountinginstruction
onrequest
metal
Han® PushPullSCRJMetal
DustprotectioncoverIP40
rubber(NBR)
ProtectioncoverIP65/IP67
02
47
PushPull
09 35 242 0313
Han®PushPullSCRJ
20100015217
20 10 125 5211
20 10 230 5211
09 35 002 4002
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-117variant14
RJ45panelfeedthrough
foropticalconnectorbasedonSCRJ
Han® PushPullSCRJMetal
Panel cut out
Panelfeedthrough
SCcontactsorderseparately
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Compactdesign
• Highpackingdensity
• Han®PushPullSCRJforPOF
isaccordingtherequirementsofAIDA
(GermanDomesticAutomobile
Manufacturers)
Locking PushPulltechnology
Degreeofprotection IP65/IP67
Matingface SCRJacc.toIEC61754-24
FiberTypen POF1) 1 mm
HCS®2) 200 µm/230µm
MM 62.5 µm/125µm
MM 50 µm/125µm
SM10µm/125µm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Zincdie-cast,nickelplated
Contacts
SCPOFcontact,1mm
SC125GIcontact
SC230HCScontact
SCRJIP20
POFconnector
02
48
PushPull
09 35 241 0401
09 35 241 0402
20100015217
20 10 125 5211
20 10 230 5211
09 35 002 4002
09 35 002 5412
09 35 002 5411
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-117variant14
SCRJconnector
Han® PushPullSCRJMetal
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Compactdesign
• Highpackingdensity
• Han®PushPullSCRJforPOF
isaccordingtherequirementsofAIDA
(GermanDomesticAutomobile
Manufacturers)
• Fieldinstallable
Locking PushPulltechnology
Degreeofprotection IP65/IP67
Matingface SCRJacc.toIEC61754-24
FiberTypen POF1) 1 mm
HCS®2) 200 µm/230µm
MM 62.5 µm/125µm
MM 50 µm/125µm
SM10µm/125µm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Zincdie-cast,nickelplated
Flammabilityacc.toUL94 V0
Cablediameter 6.5-9.5mm
Connectorset,metal
incl.housingandSCRJinsert,
POF contacts
incl.housingandSCRJinsert
SCcontactsorderseparately
PROFINET-Identication:
PROFINETO-PlugSCRJ
Contacts
SCPOFcontact,1mm
SC125GIcontact
SC230HCScontact
SCRJIP20
POFconnector
DustprotectioncoverIP40
ProtectioncoverIP65/IP67
Tooling see page 02.49
02
49
PushPull
09 35 000 9913
09 35 000 9914
20 99 000 3016
20 99 000 3013
20 99 000 1099
20 80 001 9911
TechnicalcharacteristicsFeatures
Identication PartNo. Drawing Dimensionsinmm
• Cableinsulation(PUR/PVC)isstripped
withoutdamage
• The‘stripping’and‘precisioncutting’
operationsarecompletedwithintheonetool
• Specializedcuttingmethodwithan
automaticallyadvancingroundbladefor
anaccuratecuttingresultrequiringnofinal
polishing
• Opticaldisplayindicatingremaining
operations
• Simultaneoushandlingoftwinfibers
(duplex mode)
Connectortype SCRJconnector
acc.toIEC61754-24
Locking PushPulltechnology
acc.toIEC61076-3-117variant14
(AIDAcompliant)
Insertionloss typically1.5to2.0dB
TerminationSCcontacts Fastterminationtechnique,reusable
Fibredimensions POF980/1000µm
Fibreouterdiameter 2.2mm
Cableouterdiameter 7to8.5mm
No.ofcuttingoperations Maximum1260
Assemblytoolset
forPOFcutting,
withoutnalpolishing
The set contains
-onestrippingandcutting
toolfor1260operations
-onesheathstrippingtool
-oneKevlarshear
-onepositionerforSCRJcontacts
Suppliedinarobustplasticcase
Replacement cutting tool
for1260operations
AssemblytoolsetforPOF
cutting,withnalpolishing
Withoutanopticalmeter
Withanopticalmeter
Polishingwheel(grinding
wheel)forPOFcables2.2
SandpaperforPOF,
grainsize1000
Han®PushPullSCRJPOF
Assemblytoolsforpolymer-opticalbres
Han®PushPullSCRJ
02
50
PushPull
09 45 545 9010
Han® PushPull Signal
096700081781)
096700035762)
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-117variant14
10-poles100V/5A
forpanelfeed-throughHIFF,
10-poles
incl.maleinsert
OrderD-Subcrimpmale
contactsseparately
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Forthetransmissionofanalog,lowvoltage
and bus signals
• Fullyshielded
• 10contacts
• Touch-proof
• Easyandfastcableinstallation
Locking PushPulltechnology
acc.toIEC61076-3-117variant14
Degreeofprotection IP65/IP67
Matingface acc.toIEC/PAS61076-3-11x
Numberofcontacts 10
Electricaldata
acc.toDINEN61984 5A 100V 1.5kV 3
Contactresistance 10mΩ
Termination Crimp
Conductorcrosssection AWG24…18;0.25…0.82mm²
Conductordiameter max.2.1mm
Outercablediameter 6.5…9.5mm/4…11mm
Shielding
Fullyshielded,360°shieldingcontact
Matingcycles min.500
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Zincdie-cast,nickel-plated
Flammabilityacc.toUL94 V0
D-Subcrimpcontacts
(Deviceside)
forAWG24-20;0.25-0.56mm²
forAWG22-18;0.33-0.82mm²
1)Tobeusedwithcrimptool09990000175
2)Tobeusedwithcrimptool09990000501.Suitablelocator:61036000531
available
Q3 / 2012
Han® PushPull Signal
Insert
02
51
PushPull
09 35 012 0311
09 35 012 0312
09 35 012 0331
Han® PushPull Signal
096700082781)
096700034762)
096700081781)
096700035762)
Identication PartNo. Drawing Dimensionsinmm
Panel cut out
Han® PushPull
panelfeed-throughHIFF
toholdthe10-polesinsert
D-Subcrimpcontacts
(Connectorside)
forAWG24-20;0.25-0.56mm²
forAWG22-18;0.33-0.82mm²
(Deviceside)
forAWG24-20;0.25-0.56mm²
forAWG22-18;0.33-0.82mm²
Metalrectangular
Metalcircular
Plasticrectangular
1)Tobeusedwithcrimptool09990000175
2)Tobeusedwithcrimptool09990000501.Suitablelocator:61036000531
02
52
PushPull
09 35 261 0401
09 35 261 0421
Han® PushPull Signal
Han® PushPull Signal
096700082781)
096700034762)
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-117variant14
10-poles100V/5A
Connectorset10-poles
incl. metal housing
andfemaleinsert
4…11mm
Connectorset10-poles
incl. plastic housing
andfemaleinsert
6.5…9.5mm
OrderD-Subcrimpfemale
contactsseparately
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Forthetransmissionofanalog,lowvoltage
and bus signals
• Fullyshielded
• 10contacts
• Touch-proof
• Easyandfastcableinstallation
Locking PushPulltechnology
acc.toIEC61076-3-117variant14
Degreeofprotection IP65/IP67
Matingface acc.toIEC/PAS61076-3-11x
Numberofcontacts 10
Electricaldata
acc.toDINEN61984 5A 100V 1.5kV 3
Contactresistance 10mΩ
Termination Crimp
Conductorcrosssection AWG24…18;0.25…0.82mm²
Conductordiameter max.2.1mm
Outercablediameter 6.5…9.5mm/4…11mm
Shielding
Fullyshielded,360°shieldingcontact
Matingcycles min.500
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Zincdie-cast,nickel-plated
Flammabilityacc.toUL94 V0
available
Q3 / 2012
D-Subcrimpcontacts
(Connectorside)
forAWG24-20;0.25-0.56mm²
forAWG22-18;0.33-0.82mm²
1)Tobeusedwithcrimptool09990000175
2)Tobeusedwithcrimptool09990000501.Suitablelocator:61036000531
02
53
PushPull
09 35 002 0323
09 35 002 3003
09 35 002 3004
09 35 002 5401
09 35 002 5402
09 35 000 6190
TechnicalcharacteristicsFeatures
Identication PartNo. Drawing Dimensionsinmm
• HARTINGPushPulltechnology
• Compact,space-savingdesign
• Touch-proof
• Deviceside:male
- Soldervariant,angledandstraight
• 4timescodingwithoutcontactloss
Locking PushPulltechnology
acc.toIEC61076-3-118
Degreeofprotection IP65/IP67
Numberofcontacts 4+PE
Electricaldata
acc.toDINEN61984 16A230/400V4kV3
Termination Maleinsertwithsoldertermination
Matingcycles min.500
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
Housing bulkhead mounting
plastic
Maleinsert
withsoldertermination
angled
Maleinsert
withsoldertermination
straight
Componentsdeviceside Panel cut out
PCBlayout
Seal
Han®PushPull,typeacc.toIEC61076-3-118
Housingbulkheadmountingandpowerfemalesfordeviceintegration
DustprotectioncoverIP40,
rubber(NBR)
Han® PushPullPower4/0Plastic
PCBlayout
ProtectioncoverIP65/IP67
Codingpins
02
54
PushPull
Han-Quick Lock®
09 35 231 0331
09 35 000 6190
09 35 232 0331
09 35 234 0331
Han®PushPull,typeacc.toIEC61076-3-118
Panelfeed-through,5-poles,230/400V,16A
Identication PartNo. Drawing Dimensionsinmm
Codingelement
10pieceseachfordeviceand
cable side
enables4timescodingwithout
contact loss
TechnicalcharacteristicsFeatures
Han®PushPullPower4/0
Panelfeed-through
5-poles,690V/16A
incl. bulkhead housing
andmaleinsert
withcrimptermination
(Ordercrimpmalecontacts
separately)
• HARTINGPushPulltechnology
• Compact,space-savingdesign
• Touch-proof
• Panelfeed-through:male
- crimptermination
- Han-QuickLock® terminationtechnology
• 4timescodingwithoutcontactloss
• NEW:Largerterminationcrosssection
forconductors0.25-1.5mm²
Locking PushPulltechnology
acc.toIEC61076-3-117variant14
Matingface acc.toIEC61076-3-118
Degreeofprotection IP65/IP67
Numberofcontacts 4+PE
Electricaldata
acc.toDINEN61984 16A690V4kV3
Terminationcrosssection 0.25–2.5mm²
Matingcycles min.500
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
Han® PushPullPower4/0Plastic
withHan-QuickLock®
termination
0.5 …2.5mm²
0.25…1.5mm²
available
Q2 / 2012
02
55
PushPull
Han-Quick Lock®
09 35 231 0423
09 35 232 0423
09 35 232 0421
09 35 234 0421
09 35 002 5412
09 35 002 5411
09 35 000 6190
Identication PartNo. Drawing Dimensionsinmm
Connectorset,plastic
incl. housing
andfemaleinsert
withcrimptermination
9–13mmclamprange
Han®Pcrimpcontacts
orderseparately
Han®PushPull,typeacc.toIEC61076-3-118
Connector,5-poles,230/400V,16A
Han® PushPullPower4/0Plastic
TechnicalcharacteristicsFeatures
DustprotectioncoverIP40
ProtectioncoverIP65/IP67
Codingpins
• HARTINGPushPulltechnology
• Compact,space-savingdesign
• Touch-proof
• Cableside:female
- crimptermination
- Han-QuickLock® terminationtechnology
Field-assemblywithoutspecialtools
• 4timescodingwithoutcontactloss
• NEW:Largerterminationcrosssection
forconductors0.25-1.5mm²
Locking PushPulltechnology
acc.toIEC61076-3-117variant14
Matingface acc.toIEC61076-3-118
Degreeofprotection IP65/IP67
Numberofcontacts 4+PE
Electricaldata
acc.toDINEN61984 16A690V4kV3
Terminationcrosssection 0.25–2.5mm²
Matingcycles min.500
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
withHan-QuickLock®termination
9–13mmclamprange
forterminationcrosssection0.5-2.5mm²
withHan-QuickLock®termination
6.5–9.5mmclamprange
forterminationcrosssection0.5-2.5mm²
forterminationcrosssection0.25-1.5mm²
02
56
PushPull
09 35 002 3003
09 35 002 3004
09 35 002 0303
09 35 002 5401
09 35 002 5402
09 35 000 6190
TechnicalcharacteristicsFeatures
Identication PartNo. Drawing Dimensionsinmm
• HARTINGPushPulltechnology
• Compact,space-savingdesign
• Touch-proof
• Deviceside:male
- Soldervariant,angledandstraight
• 4timescodingwithoutcontactloss
Locking PushPulltechnology
acc.toIEC61076-3-118
Degreeofprotection IP65/IP67
Numberofcontacts 4+PE
Electricaldata
acc.toDINEN61984 16A230/400V4kV3
Termination Maleinsertwithsoldertermination
Matingcycles min.500
Temperaturerange -40°C...+70°C
Flammabilityacc.toUL94 V0
Housingmaterial Zincdie-cast,nickelplated
Plastic,black(female)
Maleinsert
withsoldertermination
angled
Maleinsert
withsoldertermination
straight
Componentsdeviceside Panel cut out
PCBlayout
Seal
Housing bulkhead mounting
metal
Han®PushPull,typeacc.toIEC61076-3-118
Housingbulkheadmountingandpowerfemalesfordeviceintegration
Han® PushPullPower4/0Metal
PCBlayout
DustprotectioncoverIP40,
rubber(NBR)
ProtectioncoverIP65/IP67
Codingpins
02
57
PushPull
Han-Quick Lock®
09 35 231 0311
09 35 231 0312
09 35 232 0311
09 35 234 0311
09 35 232 0312
09 35 234 0312
09 35 000 6190
Han®PushPull,typeacc.toIEC61076-3-118
Panelfeed-through,5-poles,16A
Identication PartNo. Drawing Dimensionsinmm
Codingelement
10pieceseachfordeviceand
cable side
enables4timescodingwithout
contact loss
TechnicalcharacteristicsFeatures
Han®PushPullPower4/0
Panelfeed-through
5-poles,690V/16A
incl. bulkhead housing
andmaleinsert
• HARTINGPushPulltechnology
• Compact,space-savingdesign
• Touch-proof
• Panelfeed-through:male
- crimptermination
- Han-QuickLock® terminationtechnology
• 4timescodingwithoutcontactloss
• NEW:Largerterminationcrosssection
forconductors0.25-1.5mm²
Locking PushPulltechnology
acc.toIEC61076-3-117variant14
Matingface acc.toIEC61076-3-118
Degreeofprotection IP65/IP67
Numberofcontacts 4+PE
Electricaldata
acc.toDINEN61984 16A690V4kV3
Terminationcrosssection 0.25–2.5mm²
Matingcycles min.500
Temperaturerange -40°C...+70°C
Housingmaterial Zincdie-cast,nickel-plated
Flammabilityacc.toUL94 V0
Han® PushPullPower4/0Metal
withcrimptermination
(Ordercrimpmalecontacts
separately)
withcrimptermination
(Ordercrimpmalecontacts
separately)
Rectangularpanelcutout
Circularpanelcutout
withHan-QuickLock®
termination
0.5 …2.5mm²
0.25…1.5mm²
withHan-QuickLock®
termination
0.5 …2.5mm²
0.25…1.5mm²
available
Q2 / 2012
02
58
PushPull
Han-Quick Lock®
09 35 231 0401
09 35 232 0401
09 35 234 0401
09 35 002 5412
09 35 002 5411
09 35 000 6190
Identication PartNo. Drawing Dimensionsinmm
Connectorset,metal
incl. housing
andfemaleinsert
withcrimptermination
4–11mmclamprange
Han®Pcrimpcontacts
orderseparately
withHan-QuickLock®termination
4–11mmclamprange
forterminationcrosssection0.5-2.5mm²
forterminationcrosssection0.25-1.5mm²
Han®PushPull,typeacc.toIEC61076-3-118
Connector,5-poles,16A
Han® PushPullPower4/0Metal
TechnicalcharacteristicsFeatures
DustprotectioncoverIP40
ProtectioncoverIP65/IP67
Codingpins
• HARTINGPushPulltechnology
• Compact,space-savingdesign
• Touch-proof
• Cableside:female
- crimptermination
- Han-QuickLock® terminationtechnology
Field-assemblywithoutspecialtools
• 4timescodingwithoutcontactloss
• NEW:Largerterminationcrosssection
forconductors0.25-1.5mm²
Locking PushPulltechnology
acc.toIEC61076-3-117variant14
Matingface acc.toIEC61076-3-118
Degreeofprotection IP65/IP67
Numberofcontacts 4+PE
Electricaldata
acc.toDINEN61984 16A690V4kV3
Terminationcrosssection 0.25–2.5mm²
Matingcycles min.500
Temperaturerange -40°C...+70°C
Housingmaterial Zincdie-cast,nickel-plated
Flammabilityacc.toUL94 V0
02
59
PushPull
Han® PushPullPower4/0
09 35 000 6103
09 35 000 6104
09 35 000 6105
09 35 000 6106
09350006107
09 35 000 6203
09 35 000 6204
09 35 000 6205
09 35 000 6206
09350006207
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-118variant14
Accessories
BUCHANAN-
crimping tool 09 99 000 0001
Locator Han P®
for crimping tool 09 99 000 0001 09 99 000 0329
Multiple crimping tool depth 09 99 000 0379 Wire gauge
adjustment gauge 0.5 - 1 mm2 ø 1.55
1.5 - 2.5 mm2 ø 1.80
Removal tool Han P® 09 99 000 0319
Coding pins
for 4 times coding
without contact loss 09 35 000 6190
Identication Malecontact Femalecontact Drawing Dimensionsinmm
PartNo.
CrimpcontactsHan® P
silverplated
for0.5mm²
for0.75mm²
for1.0mm²
for1.5mm²
for2.5mm²
Wiregauge ØStripping
length
for0.5mm² AWG20 1.15 mm 6 mm
for0.75mm² AWG18 1.30 mm 6 mm
for1.0mm² AWG18 1.45 mm 6 mm
for1.5mm² AWG16 1.75mm 6 mm
for2.5mm² AWG14 2.25 mm 6 mm
02
60
PushPull
09 35 002 0431
09 35 002 0433
09 35 231 0331
09 35 232 0331
09 35 234 0331
09 35 000 6190
Han® PushPullPower4/0
Identication PartNo. Drawing Dimensionsinmm
Han®PushPull,typeacc.toIEC61076-3-117variant14
cable to cable housing
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Idealforprototyping
• Canbecombinedwithpanelfeed-throughs
forpower,dataandsignal
Locking PushPulltechnology
acc.toIEC61076-3-117variant14
Degreeofprotection IP65/IP67
Outercablediameter 6.5…9.5mm/9…13mm
Matingcycles min.750
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
foroutercablediameter
6.5…9.5mm
foroutercablediameter
9…13mm
*OrderD-Subcrimpmalecontactsseparately(seepage02.51)
Han® PushPull
cabletocablehousings,
plastic
(Orderhousingbulkheadmounting
andinsertseparately)
Suitable bulkhead
housing,plastic
forpower,5-poles,690V/16A,
incl. housing bulkhead mounting
andinsert
withcrimptermination
(OrderHan®Pcrimpmale
contactsseparately)
withHan-QuickLock®
termination
0.5 …2.5mm²
0.25…1.5mm²
Codingelementpower
10pieceseachfordeviceand
cable side
available
Q2 / 2012
02
61
PushPull
09 35 004 0321
09 35 004 3003
09 35 004 3004
09 35 431 0331
09 35 004 5401
Pin 1 Pin 5
TechnicalcharacteristicsFeatures
Housingbulkheadmountingandpowerfemalesfordeviceintegration
Identication PartNo. Drawing Dimensionsinmm
• HARTINGPushPulltechnology
• Touch-proof
• Deviceside:male
- Soldervariant,angledandstraight
• AIDA-conform
(GermanDomesticAutomobile
Manufactures)
Locking PushPulltechnology
Degreeofprotection IP65/IP67
Numberofcontacts 4+PE
Electricaldata
acc.toDINEN61984 16A24V4kV3
Termination Maleinsertwithsoldertermination
Matingcycles min.500
Temperaturerange -40°C...+70°C
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
Housing bulkhead mounting
plastic
Maleinsert
withsoldertermination
angled
Componentsdeviceside Panel cut out
Maleinsert
withsoldertermination
straight
Han® PushPullLPower4/0Plastic
ProtectioncoverIP65/IP67
Panelfeed-through,
plastic
incl.housingandmaleinsert
withspringforceconnection
02
62
PushPull
09 35 431 0421
Pin 1 Pin 5
Connector,5-poles,24V,16A
Identication PartNo. Drawing Dimensionsinmm
Connectorset,plastic
incl. housing
andfemaleinsert
withspringforceconnection
Han® PushPullLPower4/0Plastic
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Touch-proof
• Cableside:female
- springforceconnection
• AIDA-conform
(GermanDomesticAutomobile
Manufactures)
Locking PushPulltechnology
Degreeofprotection IP65/IP67
Numberofcontacts 4+PE
Electricaldata
acc.toDINEN61984 16A24V4kV3
Termination Springforceconnection
Terminationcrosssection 0.75...2.5mm²
Matingcycles min.500
Temperaturerange -40°C...+70°C
Cablediameter 9–13mm
Housingmaterial Plastic,black
Flammabilityacc.toUL94 V0
02
63
PushPull
09 35 004 0301
09 35 004 3003
09 35 004 3004
09 35 431 0311
09 35 004 5401
Pin 1 Pin 5
TechnicalcharacteristicsFeatures
Housingbulkheadmountingandpowerfemalesfordeviceintegration
Identication PartNo. Drawing Dimensionsinmm
• HARTINGPushPulltechnology
• Touch-proof
• Deviceside:male
- Soldervariant,angledandstraight
• AIDA-conform
(GermanDomesticAutomobile
Manufactures)
Locking PushPulltechnology
Degreeofprotection IP65/IP67
Numberofcontacts 4+PE
Electricaldata
acc.toDINEN61984 16A24V4kV
Termination Maleinsertwithsoldertermination
Matingcycles min.500
Temperaturerange -40°C...+70°C
Housingmaterial Zincdie-cast,nickelplated
Plastic,black(female)
Housing bulkhead mounting
metal
Maleinsert
withsoldertermination
angled
Componentsdeviceside Panel cut out
Maleinsert
withsoldertermination
straight
Han® PushPullLPower4/0Metal
Panelfeed-through,
metal
incl.housingandmaleinsert
withspringforceconnection
ProtectioncoverIP65/IP67
02
64
PushPull
09 35 431 0501
TechnicalcharacteristicsFeatures
Identication PartNo. Drawing Dimensionsinmm
Han® PushPullLPower4/0Metal
Han®PushPullLPower4/0GenderchangerMetal
•HighdegreeofprotectionIP65/IP67
•Robustmetalhousing
•StandardPROFINETcomponentofthe
Germanautomotiveproduction
•Allowsusageofdifferentcabletypes
(TypeB,C)e.g.inrobotsapplication
•ExtensionofcordsaccordingtoPROFINET
guideline
Connector Han®PushPullLPower4/0
Locking PushPulltechnology
Electricaltransmission 16A/24V
Numberofcontacts 5
Matingcycles min.500
Housingmaterial Aluminiumanodized
Dimensions 83.4x62x40.7mm(unmated)
Degreeofprotection
acc.toDIN60529 IP65/IP67(mated)
Mounting Wallmountablewith4screws
(typeM5)
Temperaturerange -20°C…+50°C
Maximumpermissiblehumidity 30%...95%(nocondensation)
Han® PushPull L Power 4/0
Genderchanger metal
including housing and printed
board with 2 x male insert with
solder termination
02
65
PushPull
09 35 431 0401
Pin 1 Pin 5
Connector,5-poles,24V,16A
Identication PartNo. Drawing Dimensionsinmm
Connectorset,metal
incl. housing
andfemaleinsert
withspringforceconnection
Han® PushPullLPower4/0Metal
TechnicalcharacteristicsFeatures
• HARTINGPushPulltechnology
• Touch-proof
• Cableside:female
- springforceconnection
• AIDA-conform
(GermanDomesticAutomobile
Manufactures)
Locking PushPulltechnology
Degreeofprotection IP65/IP67
Numberofcontacts 4+PE
Electricaldata
acc.toDINEN61984 16A24V4kV3
Termination Springforceconnection
Terminationcrosssection 0.75...2.5mm²
Matingcycles min.500
Temperaturerange -40°C...+70°C
Cablediameter 9–13mm
Housingmaterial Zincdie-cast,nickelplated
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
HARTING:
09455411902