Model PDA17 is obsolete and not recommended for new designs. Model PDB18 is preferred. PL IA NT Features CO M Carbon element *R oH S Rotary switch option Wide assortment of resistance tapers RoHS compliant* PDA17 Series - 17 mm Rotary Potentiometer Product Dimensions Electrical Characteristics Taper .................................... Linear, audio Standard Resistance Range ....................... 1 K ohms to 1 M ohms Standard Resistance Tolerance.....20 % Residual Resistance ................. 1 % max. Switch Rating .................... 1 A @ 12 VAC PDA17-SS PDA17-SN L 1.5 (.059) B Mechanical Characteristics B 17.0 (.669) DIA. 1.0 (.039) 17.0 (.669) DIA. M7x0.75 1.0 (.039) 18-TOOTH KNURL E T E L O S B O M7x0.75 18-TOOTH KNURL 1.5 (.059) 7.0 (.275) 7.0 (.275) 10.5 (.413) 20.5 (.807) Mechanical Angle .................. 260 10 Rotational Torque ........... 50 to 350 g-cm Stop Strength ..................... 3 kg-cm min. Rotational Life ................... 15,000 cycles Soldering Condition ........... 260 C max. within 3 seconds Hardware .................One flat washer and mounting nut supplied per potentiometer with bushing Switch Torque .............. 150 to 450 gf-cm Switch Action Angle .................60 max. Contact Arrangement ..................... SPST 12.5 (.492) 13.5 R (.531) R 60 0.4 (.015) L 20 (.787) 25 (.984) 30 (1.181) B 6 (.236) 9 (.354) 12 (.472) 12 (.472) F-Shaft (Metal Flatted Type) R 60 50 50 9.4 DIA. (.370) 9.4 DIA. (.370) 2.0 DIA. (.078) HOLES 2 PLCS. 1 1 12.5 (.492) 7.5 (.295) 2.8 (.110) K-Shaft (Metal 18-tooth Split Knurled Shaft) 15 (.591) 0.4 (.015) 7.5 (.295) 2.8 (.110) PDA17 Series Dimensions 7.5 (.295) 5.0 (.196) DIA. 6.0 (.236) Environmental Characteristics Operating Temperature .................................-10 C to +50 C Power Rating Linear .....................................0.1 watt Audio ....................................0.05 watt Maximum Operating Voltage Linear ........................................ 200 V Audio ......................................... 150 V Sliding Noise ........................ 47 mV max. DIA. 6.0 (.236) L 5.0 (.196) 2 3 2 3 1.5 DIA. (.059) 3 PLCS. SHAFT SHOWN IN CCW POSITION 1.5 DIA. (.059) 3 PLCS. SHAFT SHOWN IN CCW POSITION 2 L 5.0 (.196) DIMENSIONS: MM (INCHES) 50 6.0 DIA. (.236) 3 1 SCHEMATIC 4.5 (.177) F M7x0.75 L 15 (.591) 20 (.787) 25 (.984) 30 (1.181) F 7 (.276) 12 (.472) 12 (.472) 12 (.472) *RoHS Directive 2002/95/EC Jan 27, 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Applications Audio/TV sets Car radio Portable electronics Appliances PDA17 Series - 17 mm Rotary Potentiometer Product Dimensions PDA17-AN PDA17-VN L 5.0 (.196) PDA17-PS25 L DIA. 6.0 (.236) B 17.0 (.669) DIA. 1.0 (.039) M7x0.75 4.8 (.188) 7.0 (.275) DIA. 6.0 (.24) 18-TOOTH KNURL 1.0 (.039) 0.4 (.015) M7x0.75 4.3 5 (.169) 1.5 (.059) 18-TOOTH KNURL 5.0 (.196) 1.5 (.059) 7.0 (.275) 17.0 (.67) DIA. 1.5 (.059) L 3.5 (.137) B DIA. 6.0 (.236) 17.0 (.669) DIA. 1.0 (.039) 1.5 (.059) E T E L O S B O M7x0.75 0.4 (.015) 1.2 (.047) 10.0 (.393) 0.4 (.015) 2.5 (.098) 0.4 (.015) 2.8 (.110) 7.5 (.295) 50 21.3 (.838) 7.5 (.295) 2.4 (.094) 1.2 (.047) 0.4 (.015) 40 60 2.8 (.110) 7.5 (.295) 50 9.4 DIA. (.370) 9.4 DIA. (.370) 2.0 4.0 (.078) (.157) 11.8 (.464) 9.4 DIA. (.370) 2.8 (.110) 18-TOOTH KNURL 4.3 (.169) 8.0 (.314) 11.0 (.433) B 1.2 (.047) 2.4 (.094) RECOMMENDED PCB LAYOUT 1 2 1.5 DIA. (.059) 3 PLCS. 1 2 RECOMMENDED PCB LAYOUT 3 21.3 (.838) R 3.3 (.129) 8.0 (.314) 7.5 (.295) 7.2 DIA. HOLES (.283) 60 3 2.2 x 1.0 (.086 x .039) HOLES 2 PLCS. 1.0 (.039) SHAFT SHOWN IN CCW POSITION SHAFT SHOWN IN CCW POSITION 1 DIMENSIONS: 3 2 MM (INCHES) 2 1.5 DIA. (.059) 3 PLCS. 3 1 SCHEMATIC Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. R 60 SHAFT SHOWN IN CCW POSITION 11.8 (.464) PDA17 Series - 17 mm Rotary Potentiometer How To Order Product Dimensions PDA17-PN25 PDA17 - V N 20 - 102 A K PDA17-VS25 Model L L 5.0 (.196) 5.0 (.196) B 5.0 (.059) 1.5 (.059) 7.0 (.275) B DIA. 6.0 (.236) DIA. 6.0 (.236) 17.0 (.669) DIA. 1.0 (.039) 1.0 (.039) 18-TOOTH KNURL M7x0.75 18-TOOTH KNURL Standard Shaft Length * 15 = 15 mm * 20 = 20 mm * 25 = 25 mm * 30 = 30 mm 4.8 (.188) 4.3 (.169) 7.5 (.295) 16.6 (.653) 40 2.8 (.110) 7.0 (.275) 9.4 (.370) DIA. Resistance Code (See Table) 4.0 (.157) 8.0 (.314) 2.0 (.078) 11.0 (.433) 2.4 (.094) 1.2 (.047) 0.4 (.015) 3.3 (.129) 7.5 (.295) Other configurations or styles available. 40 Resistance (Ohms) 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 9.4 DIA. (.370) 7.2 DIA. HOLES (.283) 1.0 (.039) Resistance Code 102 202 502 103 203 503 104 204 504 105 RECOMMENDED PCB LAYOUT 16.6 (.653) 3 2 R 60 SHAFT SHOWN IN CCW POSITION Derating Curve 7.2 DIA. (.283) HOLES 2.2 (.086) 11.8 (.464) 1.0 (.039) 8.0 R (.314) 1.5 (.059) DIA. HOLES 3 PLCS. 60 Rating Power Ratio (%) 1 1.5 DIA. (.059) 3 PLCS. Shaft Style * K = Metal Knurled Shaft (18 Tooth Knurl) * F = Metal Flatted Shaft Standard Resistance Table 2.8 (.110) RECOMMENDED PCB LAYOUT Resistance Taper * A = Audio Taper * B = Linear Taper 60 7.5 (.295) 1.2 (.047) 2.4 (.094) Switch Option * S = Rotary Switch * N = No Switch E T E L O S B O 4.3 (.169) 0.4 (.015) M7x0.75 Terminal Configuration * S = Solder Lugs * A = PC Pins vertical/ Down Facing * V = PC Pins horizontal/ Rear Facing * P = PC Pins Front Facing 100 80 60 40 33 20 0 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (C) SHAFT SHOWN IN CCW POSITION DIMENSIONS: MM (INCHES) REV. 10/11 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.