ADS54J64IRMP - TEXAS INSTRUMENTS

MDM (Military M83401/01 and /02)

www.vishay.com Vishay Dale

Revision: 12-Sep-13 1Document Number: 31516

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,

Type RZ010 and RZ020 Dual-In-Line, Molded DIP

FEATURES

• Isolated, bussed and dual terminator schematics available

• MIL-PRF-83401 qualified

• Epoxy molded construction

• All device leads are hot-solder dipped

• Available in tube pack

• TCR available in “K” (± 100 ppm/°C) or “M” (± 300 ppm/°C)

depending on style

• 100 % screen tested per group A, subgroup 1 of

MIL-PRF-83401

• All devices are capable of passing the MIL-STD-202,

method 210, condition D, “Resistance to Soldering Heat”

test

Notes

(1) K = ± 100 ppm/°C; M = ± 300 ppm/°C

(2) ± 2 % standard, ± 1 % and ± 5 % available

Note

• For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc?31542).

STANDARD ELECTRICAL SPECIFICATIONS

VISHAY

DALE

MODEL/ 

PIN NO.

MIL

STYLE

MIL

SPEC.

SHEET

SCHEMATIC

POWER

RATING

ELEMENT

P70 °C

POWER

RATING

PACKAGE

P70 °C

RESISTANCE

RANGE



TOLERANCE (2)

± %

TEMPERATURE

COEFFICIENT (1)

(-55 °C to +125 °C)

± ppm/°C

WEIGHT

MDM14 RZ010 01

01 (B) 0.10 1.30 10 to 1M

1, 2, 5 100, 300 1.303 (A) 0.20 1.40 10 to 1M

05 (J) 0.05 1.20 Consult factory

MDM16 RZ020 02

01 (B) 0.10 1.50 10 to 1M

1, 2, 5 100, 300 1.503 (A) 0.20 1.60 10 to 1M

05 (J) 0.05 1.40 Consult factory

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: M8340101M2201GBD04 (preferred part numbering format)

MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE

VALUE TOLERANCE SCHEMATIC PACKAGING

M83401 01 = 14 pin

02 = 16 pin

K = 100 ppm

M = 300 ppm 3 digit significant

figure, followed

by a multiplier

10R0 = 10 

3302 = 33 k

1004 = 1 M

F = ± 1 %

G = ± 2 %

J = ± 5 %

A = Isolated

B = Bussed

D04 = Tin/lead, tube

DSL = Tin/lead, tube,

single lot date code

Historical Part Number Example: M8340101M2201GB (will continue to be accepted)

M83401 01 M 2201 G B D04

MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE

VALUE TOLERANCE SCHEMATIC PACKAGING

New Global Part Numbering: M8340102KA001GJD04 (preferred part numbering format)

MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE

VALUE TOLERANCE SCHEMATIC PACKAGING

M83401 01 = 14 pin

02 = 16 pin

K = 100 ppm

M = 300 ppm Per Std.

MIL. Spec.

(see Impedance

Codes table)

F = ± 1 %

G = ± 2 %

J = ± 5 %

J = Dual

terminator

D04 = Tin/lead, tube

DSL = Tin/lead, tube,

single lot date code

Historical Part Number Example: M8340102KA001GJ (will continue to be accepted)

M83401 02 K A001 G J D04

MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE

VALUE TOLERANCE SCHEMATIC PACKAGING

40DBG1022M1010438M

0DJG100AK2010438M

MDM (Military M83401/01 and /02)

www.vishay.com Vishay Dale

Revision: 12-Sep-13 2Document Number: 31516

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in inches (millimeters)

VISHAY DALE MODEL A B C

MDM14 0.750 (19.05) 0.600 (15.24) 6

MDM16 0.850 (21.59) 0.700 (17.78) 7

IMPEDANCE CODES

CODE R1 () R2 ()CODE R

1 () R2 ()

A001 82 130 A010 330 470

A002 120 200 A011 330 680

A003 130 210 A012 1.5K 3.3K

A004 160 260 A013 3K 6.2K

A005 180 240 A014 180 270

A006 180 390 A015 270 270

A007 220 270 A016 560 560

A008 220 330 A017 560 1.2K

A009 330 390 A018 620 2.7K

TECHNICAL SPECIFICATIONS

PARAMETER UNIT MDM SERIES

Maximum Operating Voltage VDC 100

Voltage Coefficient of Resistance Veff < 50 ppm

Dielectric Strength VAC 200 per min

Insulation Resistance 10 000 M

Operating Temperature Range °C -55 to +125

Storage Temperature Range °C -55 to +150

MECHANICAL SPECIFICATIONS

Marking Resistance to Solvents Permanency testing per MIL-PRF-83401

Solderability Per MIL-PRF-83401

Body Molded epoxy

Terminals Copper alloy, hot-solder dipped

0.100 ± 0.010

(2.54 ± 0.254)

Non-Accumulative Tol.

“C” Spaces

A ± 0.010 (0.254)

0.075 ± 0.015

(1.91 ± 0.381)

B ± 0.010 (0.254)

0.018 ± 0.003

(0.457 ± 0.076)

0.050 ± 0.005

(1.27 ± 0.127)

TYP 0.030

(0.762)

0.130 + 0.015

- 0.005

(3.30 + 0.381

- 0.127)

0.120 ± 0.005

(3.05 ± 0.127)

Pin #1

Identification

Pin #1

0.290 Min.

0.320 Nom.

0.360 Max.

(7.37 Min.

8.13 Nom.

9.14 Max.)

0.010 + 0.005

- 0.002

(0.254 + 0.127

- 0.051)

0.250 ± 0.005

(6.35 ± 0.127)

0.310 ± 0.010

(7.87 ± 0.254)

MDM (Military M83401/01 and /02)

www.vishay.com Vishay Dale

Revision: 12-Sep-13 3Document Number: 31516

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DERATING

CIRCUIT APPLICATIONS

01 Schematic MDM1401 (M8340101xxxxxxB)

MDM1601 (M8340102xxxxxxB)

13 or 15 resistors with one pin common

The MDMxx01 provides the user with a choice of 13 or 15 nominally

equal resistors, each connected to a common pin. Commonly used in

the following applications:

• MOS/ROM Pull-up/Pull-down 

• Open Collector Pull-up

• “Wired OR” Pull-up

• Power Driven Pull-up

• TTL Input Pull-down

• Digital Pulse Squaring

• TTL Unused Gate Pull-up

• High Speed Parallel Pull-up

03 Schematic MDM1403 (M8340101xxxxxxA)

MDM1603 (M8340102xxxxxxA)

7 or 8 isolated resistors

The MDMxx03 provides the user with a choice of 7 or 8 nominally equal

resistors, with each resistor isolated from all others. Commonly used in

the following applications:

• “Wired OR” Pull-up

• Power Driven Pull-up

• Power Gate Pull-up

• Line Termination

• Long-line Impedance Balancing

• LED Current Limiting

• ECL Output Pull-down

• TTL Input Pull-down

05 Schematic

MDM1405 (M8340101xxxxxxJ)

MDM1605 (M8340102xxxxxxJ)

12 or 14 resistor pairs

The MDMxx05 provides the user with a choice of 12 or 14 pairs of

R1/R2 resistor values for pulse squaring and TTL dual-line terminating

requirements.

•••••

•

••

Pin #1

MDM1401

MDM1601

MDM1603

MDM1403

Pin #1

MDM1405, MDM1605

Pin #1

R1 R1 R1 R1 R1 R1 R1

R2 R2 R2 R2 R2

R2R2

R1 R1 R1 R1 R1 R1 R1

R2R2R2 R2 R2 R2 R2

CAGE CODE: 91637

Single Resisto r

1.50

1.30

1.00

0.10

- 55 + 25 + 70 + 125 + 150

Ambient Temperature °C

Power Rating (W)

MDM 14

MDM 16

01 Schematic

Single Resisto r

1.60

1.40

1.00

0.20

- 55 + 25 + 70 + 125 + 150

Ambient Temperature °C

Power Rating (W)

MDM 14

MDM 16

03 Schematic

Single Resistor

1.20

1.40

1.00

0.05

- 55 + 25 + 70 + 125 + 150

Ambient Temperature °C

Power Rating (W)

MDM 14

MDM 16

chematic

MDM (Military M83401/01 and /02)

www.vishay.com Vishay Dale

Revision: 12-Sep-13 4Document Number: 31516

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PERFORMANCE

TEST CONDITIONS MAX. R

(TYPICAL TEST LOTS)

Power Conditioning 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”

for 100 h ± 4 h at +25 °C ambient temperature ± 0.50 % R

Thermal Shock 5 cycles between -65 °C and +125 °C ± 0.50 % R

Short Time Overload 2.5 x rated working voltage for 5 s ± 0.25 % R (Char. K)

± 0.50 % R (Char. M)

Low Temperature Operation 45 min at full rated working voltage at -65 °C ± 0.25 % R (Char. K)

± 0.50 % R (Char. M)

Moisture Resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 0.50 % R

Resistance to Soldering Heat Leads immersed in +260 °C solder to within 1/16" of body for 10 s ± 0.25 % R

Shock Total of 18 shocks at 100 g’s ± 0.25 % R

Vibration 12 h at maximum of 20 g’s between 10 Hz and 2000 Hz ± 0.25 % R

Load Life 1000 h at +70 °C, rated power applied 1.5 h “ON”,

0.5 h “OFF” for full 1000 h period

± 0.50 % R (Char. K)

± 2.00 % R (Char. M)

Terminal Strength 4.5 pound pull for 30 s ± 0.25 % R

Insulation Resistance 10 000 M (minimum) -

Dielectric Withstanding Voltage No evidence of arcing or damage (200 VRMS for 1 min) -

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.