MICROPROCESSOR CRYSTALS AT49 (HC49 US) ULTRA LOW PROFILE SURFACE MOUNT ABLS3 FEATURES: * Ultra Low Profile (2.5mm). * Tight stability and extended temperature available. * High reliability, Low cost SMD crystal. * Suitable for all reflow methods. APPLICATIONS: * Computers, modems, communications equipment, and networking. * Automotive and Industrial applications. Section A --- A' (No burr due to lead cutting) STANDARD SPECIFICATIONS Frequency Range FrequencyMode Range Operation Operation Mode Operating Temperature Storage Temperature Operating Temperature Frequency Tolerance @ 25C Storage Temperature Frequency Stability over Temp. @ 25C Frequency Tolerance Equivalent Series Resistance Frequency stability over temp. (ESR) Maximum Equivalent Series Resistance (ESR) Shunt Capacitance C0 Fundamental Load Capacitance CL Drive Level Aging @ 25 C First Year Insulation 3rdResistance Overtone 3.57 MHz - 65 MHz 3.5 25 MHz 3.5 MHz toMHz ~ 24 -MHz Fundamental Fundamental, AT 24.01 MHz to 50.00MHz (Fund. AT or BT) -10C~ to 60 C (See 3rd Options) 24.01 MHz 65+MHz overtone -55C to + 125 C 0C to + 70C (See Options) 50 ppm max. (See Options) -40C to + 125C 50 ppm max.Options) (See Options) 50 ppm max. (See 200 for 3.5 MHz < F < 4.0 MHz 100 ppm max. (See Options) 150 for for3.5 4.0MHz MHz< <FF< <4.000 6.0 MHz 180 max. MHz 100 for for4.0 6.0MHz MHz< <FF< <5.000 10.0 MHz MHz 150 max. 80 for for5.0 10 MHz MHz << F F << 6.000 14.0 MHz 120 max. MHz _ 25 MHz for6.0 14 MHz MHz < <F F< < 80 50 max.for 7.000 MHz 7 pF max. 80 max. for 7.0 MHz < F < 9.000 MHz p Ffor (See Option) 60 16 max. 9 MHz < F < 13.000 MHz 100 50 max. formax. 13 MHz < F < 20.000 MHz 5 ppfor m 20 max. 40 max. MHz < F< 50.0MHz (F) 500 M min. at 100 Vdc 15V 80 max. for 24.01 MHz - 70MHz Shunt Capacitance C0 Load Capacitance CL Drive Level Aging @ 25C per Year Insulation Resistance: 7 pF max. 18 pF (See Options) 1 m W max., 100 W correlation 5 ppm max. (tighter aging available) 500 M min. at 100 Vdc 15V Please see environmental, and mechanical specifications on page 68, Group 1. Marking, see page 76. Tape and Reel, see pages 74-75 (1,000 pcs / reel). Dimensions: Inches (mm) ORDERING OPTIONS ABLS3 - Frequency - CL - ESR - Temperature - Tolerance - Stability - Mode - Packaging RXXX (value in ) XX.XXXX MHz Load cap.in pF or -S for Series -A for -10C -B for -20C -C for -30C -N for -30C -D for -40C ABRACON - 1- (R) C O R P O R AT I O N to + 60C to + 70C to + 70C to + 85C to + 85C -1 -7 -2 -3 -4 for 10 ppm for 15 ppm for 20 ppm for 25 ppm for 30 ppm -U -X -W -Y -H -Z for 10 ppm for 20 ppm for 25 ppm for 30 ppm for 35 ppm for 50 ppm -T (Tape & Reel) - F (for Fundamental AT > 24 MHz) - FB (Fundamental BT > 24 MHz) (*) BT Cut Fundamental only 100 ppm max., -10C. to +60C. NOTE: Left blank if standard * All specifications and markings subject to change without notice 29 Journey * Aliso Viejo, CA 92656 * USA (949) 448-7070 * F AX : (949) 448-8484 E-MAIL: abinfo @ abracon.com * INTERNET ADDRESS: www.abracon.com ABRACON IS ISO 9001 / QS 9000 CERTIFIED