Molded Parts Specification Control Drawing Part Number : Description : 362A014 thru 114 Transition, 30, Side Breakout, Thinwall NOTES inches 1. All dimensions are in _ [millimeters] 2. Dimensions appearing in table are as follows: a As Supplied b - After Unrestricted Recovery 3. Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by .06 max. 4. Molding ports are optional. When -00 modification number is specified molding ports will be located as shown. /180 adhesive available only on 362A014. TE Connectivity 307 CONSTITUTION DRIVE MENLO PARK, CALIFORNIA 94025 Molded Parts Specification Control COATING SEE NOTE 3) H EQuiv. DIA Vr \ J DIA +! s DIA. INJECTION [ 56] PORT (SEF NOTE 4 ds H DA ns i K DIA Bop ee hoes) AS SUPPLIED AFTER UNRESTRICTED RECOVERY TABLE OF DIMENSIONS PART H&J K P R s T HW uw KW c NUMBER | Min | Max | Min | Max | +10% | +10% | +10% | +10% | +20% | +20% | +20% | t10% | +5% a b a b b b b b b b b a b 1.20 | .62 -B0 42 3.25 | 200 | 1.25 | .as 10 0 | .07 362A014 | 55.5] | [15.7] | [20.0] | [10.7] | (82.6) |[s0.8) }fst.e) |t211] | 28) | 26) | (1.8) 10 * 1.40 | .72 .60 34 250 | 1.62 | .75 .88 a 10 | .06 3624024 | (35.6) | (18.3) |[15.2] | fae] | fess) |ca77) |o1e17 |c224] | cas) | fas] |f.5) "0 seoaria | 140. | -74 40 | .21 | 240 [1.40 | .75 | .84 | .11 | 11 | _.06 10 30 35,6) | [18,8] | [10.27 | [5.3] | [eto] |[35,e] |[19.17 |[21.3] | [287] | (208) | [1.51 Drawin Revision :J1 Date :29MAR11 g Part Number : Description : Part Number : Description : 362A014 thru 114 Transition, 30, Side Breakout, Thinwall 362A014 thru 114 Transition, 30, Side Breakout, Thinwall COMPATABILITY CHART MATERIAL DASH NOJ| MATERIAL DESCRIPTION RT SPEC COATING SLASH NO. COATING S NO. COATING DESCRIPTION -3 Polyolefin, Semirigid RT-301 /42; /86 S-1017;S1048 Adhesive -4 Polyolefin, Flexible RT-1304 (/42; /86 S-1017;S1048 Adhesive -5 Elastomer, Flexible RT-501 N/A -6 Silicone RT-602 N/A -12 *VITON, Flexible RT-1312 N/A -25 Elastomer, Fluid Resistant RT-1325 (/86; /225 S-1048; S1206 Adhesive -100 Polyolefin, Semiflexible RT-1323 [180 fA. 5-1030 Adhesive ZEROHAL AX #VITON is a Registered Trademark of Dupont [ ORDERING INFORMATION 362AOXX XX XX /XXX Base part number ee Material dash number (See Compatability Chart) Modification number (lf necessary, see front of sed binder or a complete list Adhesive slash number (If necessary, see Compatability Chart) THIS DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE; CONSULT YOUR NEAREST FIELD REPRESENTATIVE FOR CURRENT REVISION Fe penn enty ION DRIVE Revision : Jt Part Number : 362A014 thru 114 MENLO PARK: CALIFORNIA 94025 Date : 29MAR11 Description : Transition, 30, Side Breakout, Thinwall CAD FILE MP01055