ScotchlokTM Terminals W W MU18-250DF/FLAG, MU14-250DF/FLAG, MU10-250DF/FLAG L Female Flag Disconnect, Non-Insulated, Butted Seam Data Sheet Product Number Wire Range (AWG) Mates with Male Tab Width(W ) x Thickness L Barrel Length Barrel I.D. MU18-250DF/FLAG 22-18 0.250 x 0.032 0.50 0.25 0.075 MU14-2507DF/FLAG 16-14 0.250 x 0.032 0.51 0.26 0.095 MU10-250DF/FLAG * 12-10 0.250 x 0.032 0.63 0.25 0.175 *Not UL Listed or CSA Certified. Installation Information LISTED 314R UNDERWRITERS LABORATORIES STANDARD NO. UL 486A 3M FILE NO. E70512 CANADIAN STANDARDS ASSOCIATION STANDARD NO. 22.2 NO. 0, 65 3M FILE NO. LR22190 m WARNING Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-450 (scissor style) hand tools. Specifications Wire Size: Barrel Seam: Maximum Operating Temp: Maximum Current: Terminal Material: Plating: See Table Above Butted 347F (175C) Same as Wire Brass Tin Barrel Crimp (Electrical) Suitable for field or factory installation. Engineering Specification Crimp-type female disconnects shall, electrically and mechanically, connect permanently to a prestripped end of a stranded copper wire, and have a tongue portion with fingers which grip a male disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination. The non-insulated Female Flag Disconnect shall be tin plated 0.020 thick brass, with a tongue for gripping a 0.250 x 0.032 male tab, and with a butted seam barrel positioned across the closed end of the tongue and sized for a specified (AWG) wire range: 22-18, 16-14, 12-10*. The connector line shall offer tongue variations (sized to grip male tabs: 0.250 x 0.032 or 0.187 x 0.020) and barrel variations in wire (AWG) range (12-18, 1614, 12-10) and construction (non insulated, vinyl insulated, nylon fully insulated, etc). The tongue portion shall be marked with the wire range and manufacturer's symbol (). Disconnects shall be suitable for field or factory wiring, with the required UL approved strain relief. *Not UL Listed or CSA Certified. 3M and Scotchlok are trademarks of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 http://www.3M.com/elpd Litho in USA. (c) 3M 2003 78-8125-9861-9-B