DESCRIPTION
Teensy 3.2 is a small, breadboard-friendly development board designed by Paul Stoffregen and
PJRC. Teensy 3.2 brings a low-cost 32 bit ARM Cortex-M4 platform to hobbyists, students and
engineers, using an adapted version of the Arduino IDE (Teensyduino) or programming directly
in C language. Teensy 3.2 is an upgrade over 3.1! Teensy 3.2 is a drop-in replacement
upgrade for 3.1 and can run any sketches designed for 3.1.
This latest version of this complete USB-based microcontoller development system now adds a
more powerful 3.3V regulator, as well as accepts a wider voltage input range. This board has
the same size, shape and pinout as well as full compatibility with all shields and add-on boards
made for the Teensy 3.1, plus double the Flash memory as the Teensy 3.0.
Let's get started!
Please note: Teensy 3 and 2 are not official Arduino-brand products. Although the
Teensyduino IDE has been adapted so that many simple Arduino projects will work with the
Teensy, there will still be a lot of libraries and shields that will not work with this device! If you're
new to microcontrollers, we suggest going with a classic Arduino UNO since all Arduino
projects, examples and libraries will work with it.
Once headers are installed they can be fitted into 0.6" wide sockets
Technical Specifications:
32 bit ARM Cortex-M4 72MHz CPU (M4 = DSP extensions) Here is Freescale's reference
manual for the chip (warning 1227 pages) as well as the Datasheet and User Guide!
256K Flash Memory, 64K RAM, 2K EEPROM
21* High Resolution Analog Inputs (13 bits usable, 16 bit hardware)
34* Digital I/O Pins (21 shared with analog)
12 PWM outputs
1 12-bit DAC output
8 Timers for intervals/delays, separate from PWM
USB with dedicated DMA memory transfers
CAN bus
3 UARTs (serial ports)
SPI, I2C, I2S, IR modulator
I2S (for high quality audio interface)
Real Time Clock (with user-added 32.768 crystal and battery)
16 general purpose DMA channels (separate from USB)
Touch Sensor Inputs
Information, documentation and specs are on the Teensy site. Please check it out for more
details!
TECHNICAL DETAILS
Dimensions: 18mm x 37mm x 4mm / 1.4" x 0.7"
Teensy 3 schematic
LEARN