Bus Drop Grips Wire Management Products
Support Grips
Bus Drop
Single Eye, Universal Eye, Galvanized Steel
T-38 Dimensions in Inches (mm)
www.hubbell-wiring.com
IMPORTANT!
It is important that you read all
breaking strength, safety and
technical data relating to this
product on pages T-43 through
T-48.
Strain
Relief
Grip
Bus
Drop
Grips
Motor Box
Safety Spring
Strain
Relief
Grip
M
E
Dim. to
Sliding Bar
Fully Ext'd.
M
E
Dim. to
Sliding Bar
Fully Ext'd.
Safety Spring
Maximum Approx. Breaking
Deflection Strength Length* Diameter
Inches/Lbs Lbs. Inches Inches Model Catalog
(cm/N) (N) (cm) (cm) Lbs. (N) Numbers
2
3/4
” at 40 lbs.
500 81/4”3/4” 40 lb. spring 20302001
(6.98 cm at 178 N)
(2,224) (20.95) (1.90) (178)
31/8” at 80 lbs. 850 81/4” 1” 80 lb. spring 20302002
(7.94 cm at 356 N) (3,781) (20.95) (2.54) (356)
Springs can be used with single eye grips by disassembling drawbar from coil,
placing through eye and replacing drawbar.
*No load.
Single Eye Wide Range
Cable Diameter Approx. Breaking E M Catalog
Range Inches (cm) Strength Lbs. (N) Inches (cm) Inches (cm) Numbers
.24”-.32” (.61-.81) 350 (1,557) 3” (7.62) 31/2” (8.89) 073041276*
.32”-.43” (.81-1.09) 450 (2,002) 4” (10.16) 4” (10.16) 073041277
.43”-.56” (1.09-1.42) 550 (2,446) 6” (15.24) 43/4” (12.06) 073041278
.56”-.73” (1.42-1.85) 1,000 (4,448) 7” (17.78) 6” (15.24) 073041279
.73”-.85” (1.85-2.16) 1,400 (6,227) 7” (17.78) 63/4” (17.14) 073041280
.85”-1.00” (2.16-2.54) 1,400 (6,227) 8” (20.32) 8” (20.32) 073041281
1.00”-1.25” (2.54-3.17) 1,500 (6,672) 9” (22.86) 91/2” (24.13) 073041282
Universal Eye Wide Range
Cable Diameter Approx. Breaking E M Catalog
Range Inches (cm) Strength Lbs. (N) Inches (cm) Inches (cm) Numbers
.32”-.43” (.81-1.09) 450 (2,002) 10” (25.40) 4” (10.16) 073041284
.43”-.56” (1.09-1.42) 550 (2,446) 12” (30.48) 43/4” (12.06) 073041285
.56”-.73” (1.42-1.85) 1,000 (4,448) 13” (33.02) 6” (15.24) 073041286
.73”-.85” (1.85-2.16) 1,400 (6,227) 13” (33.02) 63/4” (17.14) 073041287
.85”-1.00” (2.16-2.54) 1,400 (6,227) 14” (35.56) 8” (20.32) 073041288
1.00”-1.25” (2.54-3.17) 1,500 (6,672) 15” (38.10) 91/2” (24.13) 073041289
E-Eye length M-Mesh length at nominal diameter
Bus Drop Grips and Safety Springs
Kellems Bus Drop Grips are offered with either a single eye or universal
bale attachment. The mesh is single weave galvanized steel with the
patented wide range construction. They are suitable for indoor use only.
Application
Bus Drop Grips provide a safe, easy and economical method to support
flexible cord or bus drop cable at bus duct and other industrial areas.
Benefits
• Easily installed.
• Absorb tension, vibration and pull with no cable damage.
• Patented mesh construction.
Safety Spring
Springs can be used with single eye grips by disassembling drawbar from
coil, placing through eye and replacing drawbar.
Note: Item indicated with a * is not UL listed.
