25.000.25 [.984.010] 28.20 [1.110] 4.300.25 [.169.010] 11.00 [.433] 16.00 [.630] 15.40 [.606] 3.500.25 [.138.010] RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL 0.05 [.002] UNLESS NOTED RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 25.00 [.984] 20.55 [.809] 29.05 [1.144] 2.04 [.080] 0.890.07 [ .035.003] TYP 3.200.07 [ .126.003] X2 16.00 [.630] 1.02 [.040] 0.48 [.019] 2.54 [.100] 9.55 [.376] NOTE 1: C-UL APPROVED E145613 PCB HOLE NUMBERING PART NO. 133373 133380 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 GREY 4 4 ELECTRICAL CHARACTERISTICS CURRENT/VOLTAGE: 150 Vac AT 1.5 AMPS MAX AT 25C DIELECTRIC WITHSTANDING VOLTAGE: 1000 Vrms MIN, 60Hz INSULATION RESISTANCE: 500 MEGAOHMS MIN 1 1 Tolerances CONTACT RESISTANCE: 20 MILLIOHMS MAX prior notice. Drawing will not be updated. Index Date FLASH Au OVER Ni MJG-66-2V 2:1 - Designation MOD JACK - MJG 1X2, VERTICAL www.ERNI.com - MJG-64-2V Scale Subject to modification without All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. - FLASH Au OVER Ni All Dimensions in mm MAXCONN P/N: SEE CHART - IDENT. NR. 6 6 Information: Consider protection memo from DIN 34 MOUNTING BRACKET: PHOSPHOR BRONZE, Sn PLATED MAXCONN NO. KONTAKTCENDE 1 1 CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: SEE CHART CONTACT FINISH PWB-BOHRUNGSC NUMERIERUNG IDENT. NR. - 133856 MAXMJ I