Published Date : MAR 21,2008 Drawing No : SDSA4951 V3 Checked : B.L.LIU P.1/4
Part Number: NM1LUR12D5.08
T-1 3/4 (5mm) VARIABLE HEIGHT LED BOARD
INDICATOR
www.SunLED.com
Part
Number
Emitting
Color
Emitting
Material Lens-color
Luminous
Intensity
(IF=10mA)
mcd
Wavelength
nm
λP
Viewing
Angle
2θ1/2
min. typ.
NM1LUR12D5.08 Red GaAsP/GaP Red Diffused 8 44 627 30°
Features
zLED FIRMLY HELD BY SPACER-NO ADDITIONAL
FIXTURING OR GLUEING NECESSARY.
zSUITABLE FOR BACK PANEL ILLUMINATION,
CIRCUIT BOARD INDICATOR, LED INDICATOR.
zUL RATING:94V-0.
zHOUSING MATERIAL:TYPE 66 NYLON.
zRoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
UR
(GaAsP/GaP) Unit
Reverse Voltage VR 5 V
Forward Current IF 30 mA
Forward Current (Peak)
1/10Duty Cycle
0.1ms Pulse Width
iFS 160 mA
Power Dissipation PT 75 mW
Operating Temperature TA -40 ~ +85
°C
Storage Temperature Tstg -40 ~ +85
Lead Solder Temperature
[2mm Below Package Base] 260°C For 3 Seconds
Lead Solder Temperature
[5mm Below Package Base] 260°C For 5 Seconds
UR
(GaAsP/GaP) Unit
Forward Voltage (Typ.)
(IF=10mA) VF 1.9 V
Forward Voltage (Max.)
(IF=10mA) VF 2.5 V
Reverse Current (Max.)
(VR=5V) IR 10 uA
Wavelength Of Peak
Emission (Typ.)
(IF=10mA)
λP 627 nm
Wavelength Of Dominant
Emission (Typ.)
(IF=10mA)
λD 625 nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=10mA)
Δλ 45 nm
Capacitance (Typ.)
(VF=0V, f=1MHz) C 15 pF
Operating Characteristics
(TA=25°C)
Published Date : MAR 21,2008 Drawing No : SDSA4951 V3 Checked : B.L.LIU P.2/4
Part Number: NM1LUR12D5.08
T-1 3/4 (5mm) VARIABLE HEIGHT LED BOARD
INDICATOR
www.SunLED.com
UR
Published Date : MAR 21,2008 Drawing No : SDSA4951 V3 Checked : B.L.LIU P.3/4
Part Number: NM1LUR12D5.08
T-1 3/4 (5mm) VARIABLE HEIGHT LED BOARD
INDICATOR
www.SunLED.com
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : MAR 21,2008 Drawing No : SDSA4951 V3 Checked : B.L.LIU P.4/4
Part Number: NM1LUR12D5.08
T-1 3/4 (5mm) VARIABLE HEIGHT LED BOARD
INDICATOR
www.SunLED.com
PACKING & LABEL SPECIFICATIONS NM1LUR12D5.08
