High Performance InGaAs p-i-n Photodiode Sheet 1 of 3 13PD150-S The 13PD150-S, an InGaAs photodiode with a 150m-diameter photosensitive region and mounted on a metallized ceramic substrate, is intended for moderate-to-high speed applications. Efficiency coupling to multi-mode fiber in hybrid modules is enabled by the relatively large photosensitive area. Planar semiconductor design and dielectric passivation provide low noise performance. Reliability is assured by 100% purge burn-in (200C, 15 hours, Vr = 20V). Chips can also be attached and wire bonded to customersupplied or other specified packages. Features: * Planar Structure * Dielectric Passivation * 100% Purge Burn-in * High Responsivity DEVICE CHARACTERISTICS Parameters Test Conditions Minimum Typical Operating Voltage Maximum Units -20 Volts Dark Current -5V 0.5 2.5 nA Capacitance -5V 1.25 2 pF Responsivity 1300nm 0.7 0.9 A/W Rise/Fall 2 ns ABSOLUTE MAXIMUM RATINGS Reverse Voltage 20 Volts Forward Current 5mA Reverse Current 1mA Operating Temperature -40C to +85C Storage Temperature -40C to +85C Soldering Temperature 250C Sheet 1 of 3 829 Flynn Road, Camarillo, CA 93012 * Phone: (805) 445-4500 * Fax: (805) 445-4502 Email: customerservice@telcomdevices.com * Website: www.telcomdevices.com Mechanical Specifications Ceramic Packages Sheet 2 of 3 S1 Submount 0.025 sq. pod 0.050 0.010 0.050 0.020 (2 places) Chip 0.160 Bond Wire 0.060 0.080 ANODE (bias -) CATHODE (bias +) Custom packaging is also available. 829 Flynn Road, Camarillo, CA 93012 * Phone: (805) 445-4500 * Fax: (805) 445-4502 Email: customerservice@telcomdevices.com * Website: www.telcomdevices.com Sheet 2 of 3 Mechanical Specifications Ceramic Packages Sheet 3 of 3 S2 Submount 0.110 CATHODE (Bias +) Au Plated 0.035 0.010 0.035 0.065 0.060 ANODE (Bias -) Au Plated Bond Wire CATHODE (Bias +) Au Plated 0.010 Au Plated Backside Custom packaging is also available. 829 Flynn Road, Camarillo, CA 93012 * Phone: (805) 445-4500 * Fax: (805) 445-4502 Email: customerservice@telcomdevices.com * Website: www.telcomdevices.com Sheet 3 of 3