Model IDCP-3722 Vishay Dale Inductors High Current, Surface Mount FEATURES * High energy storage. * Low resistance. * Tape and reel packaging for automatic handling. ELECTRICAL SPECIFICATIONS MATERIALS Inductance Range: 10.0H to 820H. Core: Ferrite. Wire: Enamelled copper wire. Terminal: Ag + Ni + Sn/Pb. Inductance Tolerance: 20%, 10% Operating Temperature: - 20C to + 80C. Storage Temperature: - 25C to 85C. Resistance to Solder Heat: 260C for 10 seconds. DIMENSIONS in inches (millimeters) STANDARD ELECTRICAL SPECIFICATIONS INDUCTANCE (H) 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 390.0 470.0 560.0 680.0 820.0 TEST FREQUENCY L DCR MAXIMUM (Ohms) RATED DC CURRENT* (A) 2.52MHz 2.25MHz 2.25MHz 2.25MHz 2.25MHz 2.25MHz 2.25MHz 2.25MHz 2.25MHz 2.25MHz 2.25MHz 2.25MHz 1KHz 1KHz 1KHz 1KHz 1KHz 1KHz 1KHz 1KHz 1KHz 1KHz 1KHz 1KHz 0.06 0.07 0.08 0.09 0.10 0.11 0.12 0.14 0.17 0.19 0.22 0.25 0.35 0.40 0.47 0.63 0.73 0.97 1.15 1.30 1.48 1.90 2.25 2.55 2.60 2.45 2.27 2.15 1.95 1.76 1.50 1.37 1.28 1.17 1.11 1.00 0.97 0.89 0.78 0.72 0.66 0.57 0.52 0.48 0.42 0.33 0.28 0.24 B A C D F E E *Rated Current: Value obtained when current flows and the temperature has risen 40C or when DC current flows and the initial value of inductance has fallen by 10%, whichever is smaller. ORDERING INFORMATION IDCP-3722 MODEL Document Number 34090 Revision 03-May-01 10H INDUCTANCE VALUE 20% INDUCTANCE TOLERANCE A B C 0.394 0.02 [10.0 0.4] 0.213 0.02 [5.4 0.4] 0.355 0.02 [9.0 0.4] D E F 0.374 [9.5] 0.148 [3.75] 0.099 [2.5] www.vishay.com 61