www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.113/02/18
Schottky Rectifier
Features:
• For surface mounted applications
• Metal-Semiconductor junction with guarding
• Epitaxial construction
• Very low forward voltage drop
• High current capability
• Plastic material has UL ammability classication 94V-0
• For use in low voltage, high frequency inverters,
free wheeling, and polarity protection applications.
Mechanical Data:
Case : Molded Plastic
Polarity : Colour band denotes cathode
Weight : 0.007 ounces, 0.21 grams
Reverse Voltage : 20 to 100 Volts
Forward Current : 3 Amperes
Notes:
1. Measured at 1MHz and applied reverse voltage of 4V DC
2. Thermal resistance junction to lead
3. Thermal resistance junction to ambient
4. The typical data above is for reference only
Maximum Ratings and Electrical Characteristics:
Rating at 25°C ambient temperature unless otherwise specied.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristics Symbol SS32+ SS33+ SS34+ SS36+ SS310+ Unit
Max. Repetitive Peak Reverse Voltage Vrrm 20 30 40 60 100
VMax. RMS Voltage Vrms 14 21 28 42 70
Max. DC Blocking Voltage Vdc 20 30 40 60 100
Max. Average Forward
Rectied Current Tl= 100°C I(AV) 3
A
Peak Forward Surge Current,
8.3ms Single Half Sine-wave
Superimposed on Rated Load (JEDEC method)
Ifsm 80
Peak Forward Voltage at 3A DC Vf0.55 0.7 0.85 V
Max. DC Reverse Current at Tj = 25°C
Rated DC Blocking Voltage at Tj = 100°C Ir1
20 mA
Typical Junction Capacitance (Note 1) cj250 pF
Typical Thermal Resistance (Note 2) RθJL 10 °C/W
Typical Thermal Resistance (Note 3) RθJA 50
Operating Temperature Range Tj
-55 to +150 °C
Storage Temperature Range Tstg
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.113/02/18
Schottky Rectifier
Ratings and Characteristic Curves
+
+
+
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.113/02/18
Schottky Rectifier
Part Number Table
Description Part Number
Surface Mount
Schottky Barrier Rectiers
SS32+
SS33+
SS34+
SS36+
SS310+
Dimensions:
Dimensions : Inches (Millimetres)
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell Limited 2016.
