CSeries
C
86
Switch with IEC Connector Compact Size
UL Recognized
CSA Certified
VDE Approved
C Series
Two function power entry module combining a DPST
switch and an IEC 320 power line connector. Compact
packaging allows a smaller panel cutout with choice of
snap-in or flange mounting. Available with general
purpose filtering (F models - CFS, CFE), medical
application filtering (H models - CHS, CHE) or unfiltered
(CS, CE). Terminals allow for easy connection to any
wiring scheme. Preconnected terminals from line to
switch are available (B Models - CBS, CBE) for reducing
OEM wiring time.
The medical versions (H models) are designed
specifically for health care applications. Their extremely
low leakage current allows compliance with UL544 and
UL2601 as well as CSA22.2 health care specifications for
use with both patient and non-patient care equipment.
The C series also has the adaptability to fit into existing
panel cutouts using snap-on extender options. Using the
CA430 extender, the panel cutout height is increased by
0.13”. (Extender is available pre-assembled using part
numbers with ‘K’ designation)
Specifications
Hipot rating (one minute):
line-to-ground2250 VDC
line-to-line1450 VDC
Operating frequency:50/60 Hz
Rated voltage:120/250 VAC
Rated current:10A@120 VAC
10A @ 250 VAC
Operating voltages:115/230 VAC
Switch:Rated for 10,000
operations at full load.
51 Amp inrush capability.
Terminals:Unfiltered .187” x .032” terminals
Filtered.25” x .032” terminals
Filtered Models Only:
Maximum leakage current, each line-to-ground
F models@ 120 VAC 60 Hz:.25mA
@ 250 VAC 50 Hz:.40mA
H models@ 120 VAC 60 Hz:2µA
@ 250 VAC 50 Hz:5µA
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
Current Frequency MHz
Rating0.050.150.5151030
H Models
1A16213744262110
3A9143132262414
6A4102223191813
10A2 6 10151111 9
F Models
1A10264648464746
3A8163236434850
6A4112227364150
10A1 4 1418273342
Line-to-line in 50 ohm circuit
CurrentFrequency MHz
Rating0.050.150.5151030
H Models
1A1 6 1329384226
3A151022363436
6A151420313337
10A1 4 1119323738
F Models
1A1 3 1328626742
3A2 6 1423656567
6A2 6 1427464858
10A1 7 1423424462
Electrical Schematic
F Models (CFS, CFE)
H Models (CHS, CHE)
Resistor location for reference only.
CFSCS
Note 1: Jumpers provided on CBS and CBE versions.
Note 2: Location of optional filter.
B Models (CBS, CBE)
Note 1
Note 1
Note 2
Note 2
Power on/off
www.cor.com - Libertyville, IL (847) 680-7400
Libertyville, IL (847) 680-7400 - www.cor.com
Series C
C
87
Case Styles
Metric shown in italics.
CE, CBE
†
CFS, CHS
CS, CBS
†
Mounting holes: Dia. (2) with .23 Dia. x 90° Counter sunk
.13
3.3
Case Dimensions
Metric shown in italics.
PartAB C D EF
No. (max) (max) (max) ±.006 ±.006 ±.006
±.152±.152±.152
CS, CBS
CE, CBE
CFS, CHS
CFE, CHE
1.23
31.24.97
24.641.62
41.171.06
26.921.540*
39.12*1.417
36.0
.97
24.641.62
41.171.06
26.921.540*
39.12*
1.74
44.2
Panel Cutout for thickness of .031-.098 (.8-2.5).
Not recommended for plastic panels.
For snap-in applications, the D sides of the cutout must have a
.02(.508) radius on the installation side.
Snap-in models allow front mounting only.
1.23
31.24
1.74
44.2
1.12
28.5
1.12
28.51.417
36.0
1.62
41.17
1.62
41.17
* with K extender (CA430) add to height
.13
3.3
1.540*
39.12*
1.540*
39.12*
2.53
64.26
2.53
64.26
CFE, CHE
†
CBS, CBE Pre-wired Terminals (Side View)
Available Part Numbers
10CS110CE11CHS11CHE1
10CKS110CKE11CKHS11CKHE1
1CFS11CFE13CHS13CHE1
1CKFS11CKFE13CKHS13CKHE1
3CFS13CFE16CHS16CHE1
3CKFS13CKFE16CKHS16CKHE1
6CFS16CFE110CHS110CHE1
6CKFS16CKFE110CKHS110CKHE1
10CFS110CFE1
10CKFS110CKFE1
10CBS110CBE1
10CKBS110CKBE1
Panel Cutout
10CKFS1
Current Rating
(1, 3, 6, 10A)
Series
Extender Option
Blank- Without extender
K- Pre-assembled with
CA430 extender
Terminal Type
(1/4” quick connect)
Filter Type
Blank - Unfiltered
B - Pre-wired switch
F- Standard Filter
H - Medical grade filter
Mounting Type
S - Snap-in
E - Flange mount
Ordering Information
Consult your local Corcom sales representative for pricing.
Mounting holes: Dia. (2) with .23 Dia. x 90° Counter sunk
.13
3.3
