NC7SV17P5X - FAIRCHILD SEMICONDUCTOR

December 2010

NC7SV17 • Rev. 1.0.6

NC7SV17 — TinyLogic

®

ULP-A Single Buffer with Schmitt Trigger Input

NC7SV17

TinyLogic® ULP-A Single Buffer with Schmitt Trigger Input

Features

 0.9V to 3.6V VCC Supply Operation

 3.6V Over-Voltage Tolerant I/Os at VCC from

0.9V to 3.6V

 Extremely High Speed tPD

- 1.5ns: Typical for 2.7V to 3.6V VCC

- 1.8ns: Typical for 2.3V to 2.7V VCC

- 2.0ns: Typical for 1.65V to 1.95V VCC

- 3.2ns: Typical for 1.4V to 1.6V VCC

- 5.9ns: Typical for 1.1V to 1.3V VCC

- 12.0ns: Typical for 0.9V VCC

 Power-Off High-Impedance Inputs and Outputs

 High Static Drive (IOH/IOL)

- ±24mA at 3.00V VCC

- ±18mA at 2.30V VCC

- ±6mA at 1.65V VCC

- ±4mA at 1.4V VCC

- ±2mA at 1.1V VCC

- ±0.1mA at 0.9V VCC

 Uses Proprietary Quiet Series™ Noise/EMI

Reduction Circuitry

 Ultra-Small MicroPak™ Packages

 Ultra-Low Dynamic Power

Description

The NC7SV17 is a single buffer with Schmitt trigger

input from Fairchild's Ultra-Low Power (ULP-A) Series

of TinyLogic®. ULP-A is ideal for applications that

require extreme high speed, high drive, and low power.

This product is designed for a wide low-voltage

operating range (0.9V to 3.6V VCC) and applications that

require more drive and speed than the TinyLogic® ULP

series, but still offer best-in-class, low-power operation.

The NC7SV17 is uniquely designed for optimized power

and speed and is fabricated with an advanced CMOS

technology to achieve high-speed operation while

maintaining low CMOS power dissipation.

Ordering Information

Part Number Top Mark Package Packing Method

NC7SV17P5X V17 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3000 Units on

Tape & Reel

NC7SV17L6X G5 6-Lead MicroPak™, 1.00mm Wide 5000 Units on

Tape & Reel

NC7SV17FHX G5 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch 5000 Units on

Tape & Reel

TinyLogic® is a registered trademark of Fairchild Semiconductor Corporation.

MicroPak™ and Quiet Series™ are trademarks of Fairchild Semiconductor Corporation.

NC7SV17 • Rev. 1.0.6 2

NC7SV17 — TinyLogic

®

ULP-A Single Buffer with Schmitt Trigger Input

Battery Life

700

600

500

400

300

200

100

00.9 1.2

ULP-A (SV)

ULP (SP)

UHS (SZ)

1.5 1.8 2.5 3.3 5.0

Battery Life

(Days)

V

CC

SupplyVoltage

Figure 1. Battery Life vs. VCC Supply Voltage

Notes:

1. TinyLogic® ULP and ULP-A with up to 50% less power consumption can extend battery life significantly.

Battery Life = (Vbattery•Ibattery•.9)/(Pdevice)/24hrs/day

where, Pdevice = (ICC • VCC) + (CPD + CL) • VCC2 • f.

2. Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and derated 90% and device frequency at

10MHz, with CL=15pF load.

Connection Diagram

IEEE/IEC

A

1Y

Figure 2. Logic Symbol

NC7SV17 • Rev. 1.0.6 3

NC7SV17 — TinyLogic

®

ULP-A Single Buffer with Schmitt Trigger Input

Pin Configurations

NC V

CC

15

A

2

GND Y

3 4

1

NC

2

A

3

6

5

4

GND

V

CC

NC

Y

Figure 3. SC70 (Top View) Figure 4. MicroPak™ (Top Through View)

Pin Definitions

Pin # SC70 Pin # MicroPak Name Description

1 1 NC No Connect

2 2 A Input

3 3 GND Ground

4 4 Y Output

5 6 VCC Supply Voltage

5 NC No Connect

Function Table

Inputs Output

A Y

L L

H H

H=HIGH Logic Level

L=LOW Logic Level

NC7SV17 • Rev. 1.0.6 4

NC7SV17 — TinyLogic

®

ULP-A Single Buffer with Schmitt Trigger Input

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be

operable above the recommended operating conditions and stressing the parts to these levels is not recommended.

In addition, extended exposure to stresses above the recommended operating conditions may affect device

reliability. The absolute maximum ratings are stress ratings only.

Symbol Parameter Min. Max. Unit

VCC Supply Voltage -0.5 4.6 V

VIN DC Input Voltage -0.5 4.6 V

VOUT DC Output Voltage HIGH or LOW State(3) -0.5 VCC + 0.5 V

VCC=0V -0.5 4.6

IIK DC Input Diode Current VIN < 0V -50 mA

IOK DC Output Diode Current VOUT < 0V -50 mA

VOUT > VCC +50

IOH/IOL DC Output Source/Sink Current ±50 mA

ICC or IGND DC VCC or Ground Current per Supply Pin ±50 mA

TSTG Storage Temperature Range -65 +150 °C

TJ Junction Temperature Under Bias +150 °C

TL Junction Lead Temperature, Soldering 10 Seconds +260 °C

PD Power Dissipation at +85°C SC70-5 150

mW MicroPak™-6 130

MicroPak2™-6 120

ESD Human Body Model, JEDEC:JESD22-A114 4000 V

Charge Device Model, JEDEC:JESD22-C101 2000

Note:

3. IO absolute maximum rating must be observed.

Recommended Operating Conditions

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended

operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not

recommend exceeding them or designing to Absolute Maximum Ratings.

Symbol Parameter Conditions Min. Max. Unit

VCC Supply Voltage 0.9 3.6 V

VIN Input Voltage 0 3.6 V

VOUT Output Voltage VCC=0V 0 3.6

V

HIGH or LOW State 0 VCC

IOH/IOL Output Current in IOH/IOL

VCC=3.0V to 3.6V ±24

mA

VCC=2.3V to 3.6V ±18

VCC=1.65V to 1.95V ±6

VCC=1.4V to 1.6V ±4

VCC=1.1V to 1.3V ±2

VCC=0.9V ±0.1

TA Operating Temperature, Free Air -40 +85 °C

Δt/ΔV Minimum Input Edge Rate VIN=0.8V to 2.0, VCC=3.0V 10 ns/V

θJA Thermal Resistance SC70-5 425

°C/W MicroPak™-6 500

MicroPak2™-6 560

Note:

4. Unused inputs must be held HIGH or LOW. They may not float.

NC7SV17 • Rev. 1.0.6 5

NC7SV17 — TinyLogic

®

ULP-A Single Buffer with Schmitt Trigger Input

DC Electrical Characteristics

Symbol Parameter VCC Conditions

TA=25°C TA=-40 to 85°C Units

Min. Max. Min. Max.

VP Positive

Threshold

Voltage

0.90

0.30 0.70 0.30 0.70

V

1.10 0.40 1.00 0.40 1.00

1.40 0.50 1.40 0.50 1.40

1.65 0.70 1.50 0.70 1.50

2.30 1.00 1.80 1.00 1.80

2.70 1.50 2.20 1.50 2.20

VN Negative

Threshold

Voltage

0.90

0.10 0.60 0.10 0.60

V

1.10 0.15 0.70 0.15 0.70

1.40 0.20 0.80 0.20 0.80

1.65 0.25 0.90 0.25 0.90

2.30 0.40 1.15 0.40 1.15

2.70 0.60 1.50 0.60 1.50

VH Hysteresis

Voltage

0.90

0.07 0.50 0.07 0.50

V

1.10 0.08 0.60 0.08 0.60

1.40 0.09 0.80 0.09 0.80

1.65 0.15 1.00 0.15 1.00

2.30 0.25 1.10 0.25 1.10

2.70 0.60 1.20 0.60 1.20

VOH HIGH Level

Output Vol t age

0.90

IOH=-100µA

VCC-0.1 VCC-0.1

V

1.10 ≤ VCC ≤ 1.30 VCC-0.1 VCC-0.1

1.40 ≤ VCC ≤ 1.60 VCC-0.2 VCC-0.2

1.65 ≤ VCC ≤ 1.95 VCC-0.2 VCC-0.2

2.30 ≤ VCC ≤ 2.70 VCC-0.2 VCC-0.2

2.70 ≤ VCC ≤ 3.60 VCC-0.2 VCC-0.2

1.10 ≤ VCC ≤ 1.30 IOH=-2mA .75 x VCC .75 x VCC

1.40 ≤ VCC ≤ 1.60 IOH=-4mA .75 x VCC .75 x VCC

1.65 ≤ VCC ≤ 1.95 IOH=-6mA 1.25 1.25

2.30 ≤ VCC ≤ 2.70 2.0 2.0

2.30 ≤ VCC ≤ 2.70 IOH=-12mA 1.8 1.8

2.70≤ VCC ≤ 3.60 2.2 2.2

2.30 ≤ VCC ≤ 2.70 IOH=-18mA 1.7 1.7

2.70 ≤ VCC ≤ 3.60 2.4 2.4

2.70 ≤ VCC ≤ 3.60 IOH=-24mA 2.2 2.2

Continued on foll owing page…

NC7SV17 • Rev. 1.0.6 6

NC7SV17 — TinyLogic

®

ULP-A Single Buffer with Schmitt Trigger Input

DC Electrical Characteristics (Continued)

Symbol Parameter VCC Conditions TA=25°C TA=-40 to 85°C Units

Min. Max. Min. Max.

VOL LOW Level

Output Vol t age

0.90

IOL=100µA

0.10 0.10

V

1.10 ≤ VCC ≤ 1.30 0.10 0.10

1.40 ≤ VCC ≤ 1.60 0.20 0.20

1.65 ≤ VCC ≤ 1.95 0.20 0.20

2.30 ≤ VCC ≤ 2.70 0.20 0.20

2.70 ≤ VCC ≤ 3.60 0.20 0.20

1.10 ≤ VCC ≤ 1.30 IOL=2mA 0.25 x VCC 0.25 x VCC

1.40 ≤ VCC ≤ 1.60 IOL=4mA 0.25 x VCC 0.25 x VCC

1.65 ≤ VCC ≤ 1.95 IOL=6mA 0.30 0.30

2.30 ≤ VCC ≤ 2.70 IOL=12mA 0.40 0.40

2.70 ≤ VCC ≤ 3.60 0.40 0.40

2.30≤ VCC ≤ 2.70 IOL=18mA 0.60 0.60

2.70 ≤ VCC ≤ 3.60 0.40 0.40

2.70 ≤ VCC ≤ 3.60 IOL=24mA 0.55 0.55

IIN Input Leakage

Current 0.90 to 3.60 0 ≤ VIN ≤ 3.60 ±0.1 ±0.5 µA

IOFF Power Off

Leakage

Current 0 0 ≤ (VIN, vO) ≤ 3.60 0.5 0.5 µA

ICC Quiescent

Supply Current 0. 90 to 3.60 VIN=VCC, or GND 0.9 0. 9 µA

VCC ≤ VIN ≤ 3.6V ±0.9

AC Electrical Characteristics

Symbol Parameter VCC Conditions

TA=25°C TA=-40 to 85°C Units Figure

Min. Typ. Max. Min. Max.

tPHL, tPLH Propagation

Delay

0.90 CL=15pF,

RL=1MΩ 12

ns Figure 5

Figure 6

1.10 ≤ VCC ≤ 1. 30 CL=15pF,

RL=2kΩ 2.0 5.9 10.0 1.0 14.9

1.40 ≤ VCC ≤ 1. 60 1.0 3.2 6.1 0.9 7.0

1.65 ≤ VCC ≤ 1. 95 CL=30pF,

RL=500Ω

1.0 2.0 5.2 0.7 6.2

2.30 ≤ VCC ≤ 2. 70 0.8 1.8 3.7 0.6 4.4

2.70 ≤ VCC ≤ 3. 60 0.7 1.5 3.3 0.5 3.8

CIN Input

Capacitance 0 2 pF

CPD Power

Dissipation

Capacitance 0.90 to 3.60 VIN=0V or V CC,

f=10MHz 10 pF

NC7SV17 • Rev. 1.0.6 7

NC7SV17 — TinyLogic

®

ULP-A Single Buffer with Schmitt Trigger Input

AC Loadings and Waveforms

V

CC

DUT

C

L

pF R

L

TEST

SIGNAL

Figure 5. AC Test Circuit

Figure 6. AC Waveforms

Symbol VCC

3.3V ± 0.3V 2.5V ± 0.2V 1.8V ± 0.15V 1.5V ± 0.1V 1.2V ± 0.1V 0.9V

Vmi 1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2

Vmo 1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2

NC7SV17 • Rev. 1.0.6 8

NC7SV17 — TinyLogic

®

ULP-A Single Buffer with Schmitt Trigger Input

Physical Dimensions

Figure 7. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide

Pack age drawings are provi ded as a servic e to customers considering Fairc h i l d components. Drawi ngs may change in any manner

without notice. P l ease note the revi sion and/or date on t he drawing and contac t a Fairchild S emic onductor representative to v er ify

or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically

the warranty therein, which covers Fairchild products.

Always visit Fairchild Semiconductor’ s online packaging area for the most recent package drawings:

http://www.fairchildsemi.com/packaging/.

Tape and Reel Specificat i on

Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:

http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf.

Package Designator Tape Section Cavity Number Cavity Status Cover Type Status

P5X Leader (Start End) 125 (Typical) Empty Sealed

Carrier 3000 Filled Sealed

Trailer (Hub End) 75 (Typical) Empty Sealed

NC7SV17 • Rev. 1.0.6 9

NC7SV17 — TinyLogic

®

ULP-A Single Buffer with Schmitt Trigger Input

Physical Dimensions

2. DIMENSIONS ARE IN MILLIMETERS

1. CONFORMS TO JEDEC STA NDARD M0-252 VARIATION UAAD

4. FILENAME AND REVISION: MAC06A REV4

Notes:

3. DRAWING CONFORMS TO ASME Y14.5M-1994

TOP VIEW

RECOMMENED

LAND PATTERN

BOTTOM VIEW

1.45

1.00

A

B0.05 C

0.05 C

2X

0.55MAX

0.05 C

(0.49)

(1)

(0.75)

(0.52)

(0.30)

6X

1X

6X

PIN 1

DETAIL A

0.075 X 45

CHAMFER

0.25

0.15

0.35

0.25

0.40

0.30

0.5

(0.05)

1.0

5X

DETAIL A

PIN 1 TERMINAL

0.40

0.30

0.45

0.35

0.10

0.00

0.10 CBA

0.05 C

C0.05 C

0.05

0.00

5X

6X (0.13)

4X

6X

PIN 1 IDENTIFIER

(0.254)

5. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY

5

OTHER LINE IN THE MARK CODE LAYOUT.

Figure 8. 6-Lead, MicroPak™, 1.0mm Wide

Pack age drawings are provided as a service to customers consideri ng Fai rchild components . Drawings may c hange i n any manner

without notice. P l ease note the revi sion and/or date on t he drawing and contac t a Fairchild S emiconductor represent ative to v er ify

or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically

the warranty therein, which covers Fairchild products.

Always visit Fairchild Semiconductor’ s online packaging area for the most recent package drawings:

http://www.fairchildsemi.com/packaging/.

Tape and Reel Specificat i on

Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:

http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.

Package Designator Tape Section Cavity Number Cavity Status Cover Type Status

L6X Leader (Start End) 125 (Typical) Empty Sealed

Carrier 5000 Filled Sealed

Trailer (Hub End) 75 (Typical) Empty Sealed

NC7SV17 • Rev. 1.0.6 10

NC7SV17 — TinyLogic

®

ULP-A Single Buffer with Schmitt Trigger Input

Physical Dimensions

1.00

B. DIMENSIONS ARE IN MILLIMETERS.

C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994

NOTES:

A. COMPLIES TO JEDEC M O-252 STANDARD

0.05 C A

B

0.55MAX

0.05 C

C

0.35

0.09

0.19

123

0.35

0.25

5X

6X

DETAIL A

0.60

(0.08)

4X

(0.05) 6X

0.40

0.30

0.075X45°

CHAMFER

5X 0.40

0.35

1X 0.45

6X 0.19

TOP VIEW

BOTTOM VIEW

0.66

0.10 CBA

.05 C

0.89

PIN 1

0.05 C

2X

2X 1.00

D. LANDPATTERN RECOMMENDATION IS BASED ON FSC

E. DRAWING FILENAME AND RE VISION: MGF06AREV3

0.52

0.73

0.57

0.20 6X

1X

5X

RECOM M E NDE D LAND PATTERN

FOR SPACE CONSTRAINED PCB

DETAIL A

PIN 1 LEAD SCALE: 2X

ALTERNATIVE LAND PATTERN

FOR UNIVERSAL APPLICATION

DESIGN.

0.90

MIN 250uM

654

0.35

(0.08) 4X

SIDE VIEW

Figure 9. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch

Pack age drawings are provided as a service to customers consideri ng Fai rchild components . Drawings may c hange i n any manner

without notice. P l ease note the revi sion and/or date on t he drawing and contac t a Fairchild S emiconductor represent ative to v er ify

or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically

the warranty therein, which covers Fairchild products.

Always visit Fairchild Semiconductor’ s online packaging area for the most recent package drawings:

http://www.fairchildsemi.com/packaging/.

Tape and Reel Specificat i on

Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:

http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf.

Package Designator Tape Section Cavity Number Cavity Status Cover Type Status

FHX Leader (Start End) 125 (Typical) Empty Sealed

Carrier 5000 Filled Sealed

Trailer (Hub End) 75 (Typical) Empty Sealed

NC7SV17 • Rev. 1.0.6 11

NC7SV17 — TinyLogic

®

ULP-A Single Buffer with Schmitt Trigger Input