CNY17F-1S-TA1 - Lite-On Electronics

LITE-ON DCC

RELEASE

BNS-OD-FC001/A4

LITE-ON Technology Corp. / Optoelectronics

No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.

Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660

http://www.liteon.com/opto

Photocoupler

Product Data Sheet

CNY17F-1 THRU CNY17F-

4 SERIES

Spec No. :DS-70-99-0032

Effective Date: 08/22/2017

Revision: D

1/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

1. DESCRIPTION

1.1 Features

 Current transfer ratio (CTR : MIN. 40% at I

F

= 10mA, V

CE

= 5V, T

A

=25

o

C)

 High collector-emitter voltage

V

CEO

= 70V

 High input-output isolation voltage

Viso = 5,000Vrms

 Response time (tr : TYP. 5µs at VCE = 10V, IC = 2mA, RL = 100Ω)

 Dual-in-line package :

CNY17F-1, CNY17F-2, CNY17F-3, CNY17F-4

 Wide lead spacing package :

CNY17F-1M, CNY17F-2M, CNY17F-3M, CNY17F-4M

 Surface mounting package :

CNY17F-1S, CNY17F-2S, CNY17F-3S, CNY17F-4S

 Tape and reel packaging :

CNY17F-1S-TA, CNY17F-2S-TA, CNY17F-3S-TA, CNY17F-4S-TA

CNY17F-1S-TA1, CNY17F-2S-TA1, CNY17F-3S-TA1, CNY17F-4S-TA1

 Safety approval

* UL approved (No. E113898)

* TUV approved (No. R9653630)

* CSA approved (No. CA91533-1)

* FIMKO approved (No. 193422-01)

* VDE approved (No. 40015248 )

* BSI approved (No. 9018-9)

* CQC approved (No.CQC11001061921-2)

 Creepage distance > 8.0 mm ; Clearance > 8.0 mm

 The relevant models are the models Approved by VDE according to DIN EN 60747-5-5

Approved Model No.: CNY17F-1-V, CNY17F-2-V, CNY17F-3-V, CNY17F-4-V

CNY17F-1M-V, CNY17F-2M-V, CNY17F-3M-V, CNY17F-4M-V

CNY17F-1S-V, CNY17F-2S-V, CNY17F-3S-V, CNY17F-4S-V

CNY17F-1STA-V, CNY17F-2STA-V, CNY17F-3STA-V, CNY17F-4STA-V

CNY17F-1STA1-V, CNY17F-2STA1-V, CNY17F-3STA1-V, CNY17F-4STA1-V

VDE approved No.: 40015248 (According to the specification DIN EN 60747-5-5)

 Operating isolation voltage VIORM : 850V (Peak)

 Transient voltage VTR : 6000V (Peak)

 Pollution : 2 (According to VDE 0110-1 : 1997-04)

 Clearances distance (Between input and output) : 7.0mm (MIN.)

2/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

 Creepage distance (Between input and output) : 7.0mm (MIN.)

 Isolation thickness between input and output : 0.4mm (MIN.)

 Safety limit values Current (Isi) : 400mA (Diode side)

Power (Psi) : 700mW (Phototransistor side)

Temperature(Tsi) : 175

o

C

In order to keep safety electric isolation of photocoupler, please set the protective

circuit to keep within safety limit values when the actual application equipment troubled.

 Indication of VDE approval prints " " on sleeve package.

 RoHS Compliance

All materials be used in device are followed EU RoHS directive (No.2002/95/EC).

 ESD pass HBM 8000V/MM2000V

 MSL class1

1.2 Applications

 Power Supply regulators

 Digital logic inputs

 Microprocessor inputs

 Appliance Sensor Systems

 Industrial Controls

3/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

2. PACKAGE DIMENSIONS

2.1 CNY17F-1, CNY17F-2, CNY17F-3, CNY17F-4

2.2 CNY17F-1M, CNY17F-2M, CNY17F-3M, CNY17F-4M

Notes :

4/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

1. Year date code.

2. 2-digit work week.

3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ).

4. VDE option.

5. Model No.: CNY17F-1, CNY17F-2, CNY17F-3, CNY17F-4

* All dimensions in millimeters.

5/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

2.3 CNY17F-1S, CNY17F-2S, CNY17F-3S, CNY17F-4S

Notes :

1. Year date code.

2. 2-digit work week.

3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ).

4. VDE option.

5. Model No.: CNY17F-1, CNY17F-2, CNY17F-3, CNY17F-4

* All dimensions in millimeters.

6/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

3. TAPING DIMENSIONS

3.1 CNY17F-1S-TA, CNY17F-2S-TA, CNY17F-3S-TA, CNY17F-4S-TA

3.2 CNY17F-1S-TA1, CNY17F-2S-TA1, CNY17F-3S-TA1, CNY17F-4S-TA1

Package Type CNY17F series

Quantities (pcs) 1000

Description Symbol

Dimension in mm

(inch)

Tape wide W 16±0.3 (0.63)

Pitch of sprocket holes P

0

4±0.1 (0.15)

Distance of compartment F 7.5±0.1 (0.295)

P

2

2±0.1 (0.079)

Distance of compartment to

compartment P

1

12±0.1 (0.472)

7/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

3.3

Quantities Per Reel

4. RATING AND CHARACTERISTICS

4.1 Absolute Maximum Ratings at Ta=25°C

Package Type CNY17F series

Quantities (pcs) 1000

Parameter Symbol Rating Unit

Input

Forward Current I

F

60 mA

Reverse Voltage V

R

6 V

Power Dissipation P 100 mW

Output

Collector - Emitter Voltage V

CEO

70 V

Emitter - Collector Voltage V

ECO

7 V

Collector Current I

C

150 mA

Collector Power Dissipation P

C

150 mW

Total Power Dissipation P

tot

250 mW

*1 Isolation Voltage V

iso

5000 V

rms

Operating Temperature T

opr

-55 ~ +100

°

C

Storage Temperature T

stg

-55 ~ +150

°

C

*2 Soldering Temperature T

sol

260

°

C

*1. AC For 1 Minute, R.H. = 40 ~ 60%

Isolation voltage shall be measured using the following method.

(1) Short between anode and cathode on the primary side and between collector and emitter on the

secondary side.

(2) The isolation voltage tester with zero-cross circuit shall be used.

(3) The waveform of applied voltage shall be a sine wave.

*2. For 10 Seconds

8/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

*

CTR

I

I100%

C

F

= ×

4.2

ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25°C

PARAMETER SYMBOL

MIN.

TYP.

MAX.

UNIT

CONDITIONS

INPUT

Forward Voltage VF — 1.45

1.65

V IF=60mA

Reverse Current IR — — 10 µA

VR=6V

Terminal Capacitance Ct — — 100

pF

V=0, f=1KHz

OUTPUT

Collector Dark Current ICEO — — 50 nA

VCE=10V, IF=0

Collector-

Emitter

Breakdown Voltage BVCEO 70 — — V

IC=0.1mA

IF=0

Emitter-Collector Breakdown

Voltage BVECO 7 — — V IE=10µ

A

IF=0

TRANSFER

CHARACTERISTICS

Current

*Transfer

Ratio

CNY17F-1

CTR

40 — 80

% IF=10mA

VCE=5V

CNY17F-2

63 125

CNY17F-3

100

200

CNY17F-4

160

— 320

Collector-

Emitter

Saturation Voltage VCE(sat)

— — 0.3 V IF=1

0mA

IC=2.5mA

Isolation Resistance Riso 100

— — GΩ

DC500V

40 ~ 60% R.H.

Floating Capacitance Cf — — 2 pF

V=0, f=1MHz

Response Time (Rise) tr — 5 10 µs VCE=10V, IC=2mA

RL=100Ω

Response Time (Fall) tf — 5 10 µs

9/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

4.3 ISOLATION SPECIFICATION ACCORDING TO VDE

Parameter Symbol

Conditions Rating Unit Remark

Class of environmental test - DIN IEC68 55/100/21 -

Pollution - DIN VDE0110 2 -

Maximum Operating

Isolation Voltage V

IORM

- 850 V

PEAK

Refer to the Diagram

1, 2

Partial Discharge Test

Voltage (Between Input

and Output)

Diagram 1

Vpr tp=60s, qc<5pC 1275 V

PEAK

Diagram 2

tp=1s, qc<5pC 1594 V

PEAK

Maximum Over-voltage V

INITIAL

t

INI

= 10s 6000 V

PEAK

Safety Maximum Ratings

Refer to the

Figure 1, 3

1) Case Temperature Tsi I

F

= 0, Pc = 0 175

o

C

2) Input Current Isi Pc=0 400 mA

3) Electric Power (Output or Total

Power Issipation) Psi - 700 mW

Isolation Resistance

(Test Voltage Between

Input and Output : DC500V)

R

ISO

Ta=Tsi MIN.10

9

Ω

Ta=Topr(MAX.) MIN.10

11

Ta=25

o

C MIN.10

12

Precautions in performing isolation test

* Partial discharge test methods shall be the ones according to the specifications of DIN EN 60747-5-5

* Please don't carry out isolation test (Viso) over V

INITIAL

,This product deteriorates

isolation characteristics by partial discharge due to applying high voltage

10/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

(ex. V

INITIAL

). And there is possibility that this product occurs partial discharge in

operating isolation voltage (V

IORM

)

4.4 PARTIAL DISCHARGE TEST METHOD

t2t3

t

ini

t1 tp

tb t4

VV

INTIAL

pr

V

IORM

V

t

t3 tp

tb t4

V

pr

V

IORM

V

t

Method (A) for type testing and random testing.

Method (B) for routine testing.

t1, t2 = 1 to 10s

t3, t4 = 1s

tp (Partial Discharge Measuring Time)= 60s

tb = 62s

tini = 10s

t3, t4 = 0.1s

tp (Partial Discharge Measuring Time)= 1s

tb = 1.2s

The partial discharge level shall not exceed 5 pc during the partial discharge measuring time interval t

p

under the test

conditions shown above.

11/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

5. CHARACTERISTICS CURVES

Fig.1 Forward Current vs. Fig.2 Collector Power Dissipation vs.

Ambient Temperature

Fig.4 Forward Current vs.

Fig.5 Current Transfer Ratio vs.

Forward Current Fig.6 Collector Current vs.

Collector-emitter Voltage

Forward voltage V (V)

Forward current I (mA)

F

FCE

F

Forward current I (mA)

F

-55

Ta= 75 C

50 C 25 C

0 C

-25 C

Ta= 25 C

I = 30mA

Pc(MAX.)

5mA

10mA

20mA

F

80

R =

500k 100k

2mA

Ambient Temperature

Forward current I (mA)

Ambient temperature Ta ( C) Ambient temperature Ta ( C)

Collector power dissipation Pc (mW)

Collector current Ic (mA)

Current transfer ratio CTR (%)

Collector-emitter voltage V (V)

60

40

20

0-25 0 25 50 75 100 125 50-25-55 0 25 12575 100

200

100

50

150

0

10.5 1.0 1.5 2.0 2.5 3.0

2

5

10

20

50

100

200

500

00 2 4 6 8 10

5

10

15

20

25

30

35

40

45

0

02 5 10 20 50

20

40

80

100

120

140

160

200

180

60

Forward Voltage

o

oo

o

oo

Fig.3 Collector-emitter Saturation

Voltage vs. Forward Current

Forward current I (mA)

F

Collector-emitter saturation voltage

V (sat) (V)

2mA

3mA

1mA

5mA

Ic= 0.5mA Ta= 25 C

o

0 2.5 5.0 7.5 10.0 12.5

0

1

2

3

4

5

6

V

CE

= 5V

Ta= 25 C

12/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

Fig.11 Frequency Response

Fig.9 Collector Dark Current vs.

Voltage gain Av (dB)

Frequency f (kHz)

-8

-100.5 1

-4

-2

-6

2 5 10 20

R = 200

50010050 200

150 75

Ambient temperature Ta ( C)

10

Collector dark current I (A)

2

0

10

10 -30

-13

-12

200 40

Ambient Temperature

10

CEO

-11

-10

-9

-8

10

-7

-6

100

o

60 80

Load resistance R

L

(k )

Load Resistance

Fig.10 Response Time vs.

Response time (s)

1

0.5

0.02 0.05

10

5

2

0.1 0.2 0.5

tr

tf

o

Fig.7 Relative Current Transfer Ratio vs.

Ambient temperature Ta ( C)

50

Relative current transfer ratio (%)

-55

0

100

0-25 25

Ambient Temperature

150

100

o

7550

vs. Ambient Temperature

Ambient temperature Ta ( C)

Fig.8 Collector-emitter Saturation Voltage

Collector-emitter saturation voltage

0.14

0.12

0.10

0.08

0.06

0.04

0.02

0-55

V (sat) (V)

-25 0

0.16

7525 50

o

100

90%

Test Circuit for Frequency Response

Output

Vcc

td

tr

ts

tf

Output

Test Circuit for Response Time

Input

Vcc Input

Output 10%

R

D

R

L

R

L

R

D

I

F

= 10mA

V

CE

= 5V

I

F

= 10mA

V

CC

= 5V

Ta= 25 C

I

F

= 10mA

I

C

= 2.5mA

V

CE

= 10V

I

F

= 10mA

V

CC

= 5V

Ta= 25 C

o

13/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

6. TEMPERATURE PROFILE OF SOLDERING

6.1 IR Reflow soldering (JEDEC-STD-020C compliant)

One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times.

Profile item Conditions

Preheat

- Temperature Min (T

Smin

)

- Temperature Max (T

Smax

)

- Time (min to max) (ts)

150˚C

200˚C

90±30 sec

Soldering zone

- Temperature (T

L

)

- Time (t

L

)

217˚C

60 sec

Peak Temperature (T

P

) 260˚C

Ramp-up rate 3˚C / sec max.

Ramp-down rate 3~6˚C / sec

60 ~ 120 sec

25 C

150 C

200 C

260 C

217 C

60 sec

Time (sec)

Temperature ( C)

20 sec

Tsmax

ts (Preheat)

tL (Soldering)

Tsmin

TL

TP

Ramp-down

Ramp-up

35~70 sec

14/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

6.2 Wave soldering (JEDEC22A111 compliant)

One time soldering is recommended within the condition of temperature.

Temperature: 260+0/-5˚C

Time: 10 sec.

Preheat temperature:25 to 140˚C

Preheat time: 30 to 80 sec.

6.3 Hand soldering by soldering iron

Allow single lead soldering in every single process. One time soldering is recommended.

Temperature: 380+0/-5˚C

Time: 3 sec max.

15/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD)

Unit: mm

8. NAMING RULE

Example : CNY17F-1S-TA1

(2) TAPING TYPE (TA, TA1 or none)

Please refer to orientation of taping on Page P5

(1) No suffix = Dual-in-Line package

M = Wide lead spacing package

S = Surface mounting package

DEVICE PART NUMBER

Classified by CTR RANK

Please refer to the CTR table on Page P7

CNY17F-X(1)-(2)

16/16

Photocoupler

CNY17F series

Part No : CNY17F series

BNS-OD-FC002/A4

Rev.: C

Example : CNY17F-1STA1-V

9. NOTES



LiteOn is continually improving the quality, reliability, function or design and Lite

On reserves the right to make changes without

further notices.



The products shown in this publication are designed for the general use in electronic

applications such as office automation

equipment, communications devices, audio/visual equipment, electrical application and instrumentation.



For equipment/devices where high reliability or safety is required, such as space applications, nucl

ear power control equipment,

medical equipment, etc, please contact our sales representatives.



When requiring a device for any “specific” application, please contact our sales in advice.



If there are any questions about the contents of this publication, please contact us at your convenience.



The contents described herein are subject to change without prior notice.



Immerge unit’s body in solder paste is not recommended.

(2) TAPING TYPE (TA, TA1 or none)

Please refer to orientation of taping on Page P5

(1) No suffix = Dual-in-Line package

M = Wide lead spacing package

S = Surface mounting package

(3) VDE Option

CNY17F-X(1)(2)-V

DEVICE PART NUMBER

Classified by CTR RANK

Please refer to the CTR table on Page P7