© Semiconductor Components Industries, LLC, 2011
October, 2011 Rev. 11
1Publication Order Number:
TIP29B/D
TIP29, A, B, C (NPN),
TIP30, A, B, C (PNP)
Complementary Silicon
Plastic Power Transistors
Designed for use in general purpose amplifier and switching
applications. Compact TO220 AB package.
Features
PbFree Packages are Available*
MAXIMUM RATINGS
Rating Symbol
29
30
29A
30A
29B
30B
29C
30C Unit
Collector Emitter
Voltage
VCEO 40 60 80 100 Vdc
Collector Base Voltage VCB 40 60 80 100 Vdc
Emitter Base Voltage VEB 5.0 Vdc
Collector Current
Continuous
Peak
IC
1.0
3.0
Adc
Base Current IB0.4 Adc
Total Power Dissipation
@ TC = 25°C
Derate above 25°C
PD30
0.24
W
W/°C
Total Power Dissipation
@ TA = 25°C
Derate above 25°C
PD
2.0
0.016
W
W/°C
Unclamped Inductive
Load Energy (Note 1)
E 32 mJ
Operating and Storage
Junction Temperature
Range
TJ, Tstg 65 to + 150 °C
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance, JunctiontoAmbient RqJA 62.5 °C/W
Thermal Resistance, JunctiontoCase RqJC 4.167 °C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. This rating based on testing with LC = 20 mH, RBE = 100 W, VCC = 10 V, IC =
1.8 A, P.R.F = 10 Hz
*For additional information on our PbFree strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
TO220AB
CASE 221A
STYLE 1
MARKING
DIAGRAM
1 AMPERE
POWER TRANSISTORS
COMPLEMENTARY SILICON
40, 60, 80, 100 VOLTS,
80 WATTS
http://onsemi.com
123
4
TIPxxx = Device Code:
29, 29A, 29B, 29C
30, 30A, 30B, 30C
A = Assembly Location
Y = Year
WW = Work Week
G=PbFree Package
TIPxxxG
AYWW
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
ORDERING INFORMATION
STYLE 1:
PIN 1. BASE
2. COLLECTOR
3. EMITTER
4. COLLECTOR
TIP29, A, B, C (NPN), TIP30, A, B, C (PNP)
http://onsemi.com
2
Figure 1. Darlington Circuit Schematic
BASE
EMITTER
COLLECTOR
8.0 k 120
BASE
EMITTER
COLLECTOR
8.0 k 120
ORDERING INFORMATION
Device Package Shipping
TIP29 TO220 50 Units / Rail
TIP29G TO220
(PbFree)
50 Units / Rail
TIP29A TO220 50 Units / Rail
TIP29AG TO220
(PbFree)
50 Units / Rail
TIP29B TO220 50 Units / Rail
TIP29BG TO220
(PbFree)
50 Units / Rail
TIP29C TO220 50 Units / Rail
TIP29CG TO220
(PbFree)
50 Units / Rail
TIP30 TO220 50 Units / Rail
TIP30G TO220
(PbFree)
50 Units / Rail
TIP30A TO220 50 Units / Rail
TIP30AG TO220
(PbFree)
50 Units / Rail
TIP30B TO220 50 Units / Rail
TIP30BG TO220
(PbFree)
50 Units / Rail
TIP30C TO220 50 Units / Rail
TIP30CG TO220
(PbFree)
50 Units / Rail
TIP29, A, B, C (NPN), TIP30, A, B, C (PNP)
http://onsemi.com
3
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
Characteristic Symbol Min Max Unit
OFF CHARACTERISTICS
CollectorEmitter Sustaining Voltage (IC = 30 mAdc, IB = 0) (Note 2)
TIP29, TIP30
TIP29A, TIP30A
TIP29B, TIP30B
TIP29C, TIP30C
VCEO(sus)
40
60
80
100
Vdc
Collector Cutoff Current
(VCE = 30 Vdc, IB = 0) TIP29, TIP29A, TIP30, TIP30A
(VCE = 60 Vdc, IB = 0) TIP29B, TIP29C, TIP30B, TIP30C
ICEO
0.3
0.3
mAdc
Collector Cutoff Current
(VCE = 40 Vdc, VEB = 0) TIP29, TIP30
(VCE = 60 Vdc, VEB = 0) TIP29A, TIP30A
(VCE = 80 Vdc, VEB = 0) TIP29B, TIP30B
(VCE = 100 Vdc, VEB = 0) TIP29C, TIP30C
ICES
200
200
200
200
mAdc
Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) IEBO 1.0 mAdc
ON CHARACTERISTICS (Note 2)
DC Current Gain (IC = 0.2 Adc, VCE = 4.0 Vdc)
DC Current Gain (IC = 1.0 Adc, VCE = 4.0 Vdc)
hFE 40
15
75
CollectorEmitter Saturation Voltage (IC = 1.0 Adc, IB = 125 mAdc) VCE(sat) 0.7 Vdc
BaseEmitter On Voltage (IC = 1.0 Adc, VCE = 4.0 Vdc) VBE(on) 1.3 Vdc
DYNAMIC CHARACTERISTICS
CurrentGain Bandwidth Product (Note 3)
(IC = 200 mAdc, VCE = 10 Vdc, ftest = 1.0 MHz)
fT3.0 MHz
SmallSignal Current Gain (IC = 0.2 Adc, VCE = 10 Vdc, f = 1.0 kHz) hfe 20
2. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%
3. fT = hfe⎪• ftest
TIP29, A, B, C (NPN), TIP30, A, B, C (PNP)
http://onsemi.com
4
0.03
Figure 2. DC Current Gain
IC, COLLECTOR CURRENT (AMP)
0.03
hFE, DC CURRENT GAIN
0.5
5.0
70
3.0
100
7.0
300
30
0.1 0.3
0.07 1.0
TJ = 150°C
25°C
-55°C
VCE = 2.0 V
500
10
50
3.0
t, TIME (s)μ
Figure 3. TurnOff Time
IC, COLLECTOR CURRENT (AMP)
IB1 = IB2
IC/IB = 10
ts = ts - 1/8 tf
TJ = 25°C
ts
TURN-ON PULSE
APPROX
+11 V
Vin 0
VEB(off) t1
APPROX
+11 V
Vin
t2
TURN-OFF PULSE
t3
t1 7.0 ns
100 < t2 < 500 ms
t3 < 15 ns
DUTY CYCLE 2.0%
APPROX -9.0 V
RB and RC VARIED TO OBTAIN
DESIRED CURRENT LEVELS.
SCOPE
RC
RB
VCC
Vin
Cjd << Ceb
-4.0 V
Figure 4. Switching Time Equivalent Circuit
0.03
Figure 5. TurnOn Time
IC, COLLECTOR CURRENT (AMP)
0.02 0.1 3.0
0.07
1.0
1.0
IC/IB = 10
TJ = 25°C
tr @ VCC = 10 V
t, TIME (s)μ
0.5
0.3
0.1
0.05
0.05 0.3 0.5
td @ VEB(off) = 2.0 V
0.03
0.7
2.0
0.07 0.7
tr @ VCC = 30 V
0.05 0.7
tf @ VCC = 10 V
tf @ VCC = 30 V
0.07
1.0
0.5
0.3
0.1
0.05
0.03
0.7
2.0
0.2
0.1 3.01.00.05 0.3 0.50.07 0.7 2.00.2
Figure 6. Active Region Safe Operating Area
VCE, COLLECTOR-EMITTER VOLTAGE, (VOLTS)
10
0.1 10
SECOND BREAKDOWN LIMITED
THERMALLY LIMITED @ TC = 25°C
BONDING WIRE LIMITED
IC, COLLECTOR CURRENT (AMPS)
1.0 20 10
0
40
3.0
4.0
0.1
TIP29, 30
TIP29A, 30A
TIP29B, 30B
TIP29C, 30C
TJ = 150°C
CURVES APPLY BELOW
RATED VCEO
1 ms
dc
5 ms
There are two limitations on the power handling ability of
a transistor: average junction temperature and second
breakdown. Safe operating area curves indicate IC VCE
operation; i.e., the transistor must not be subjected to greater
dissipation than the curves indicate.
The data of Figure 6 is based on TJ(pk) = 150°C; TC is
variable depending on conditions. Second breakdown pulse
limits are valid for duty cycles to 10% provided TJ(pk)
v 150°C. At high case temperatures, thermal limitations
will reduce the power that can be handled to values less than
the limitations imposed by second breakdown.
TIP29, A, B, C (NPN), TIP30, A, B, C (PNP)
http://onsemi.com
5
PACKAGE DIMENSIONS
TO220
CASE 221A09
ISSUE AG
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.570 0.620 14.48 15.75
B0.380 0.405 9.66 10.28
C0.160 0.190 4.07 4.82
D0.025 0.036 0.64 0.91
F0.142 0.161 3.61 4.09
G0.095 0.105 2.42 2.66
H0.110 0.161 2.80 4.10
J0.014 0.025 0.36 0.64
K0.500 0.562 12.70 14.27
L0.045 0.060 1.15 1.52
N0.190 0.210 4.83 5.33
Q0.100 0.120 2.54 3.04
R0.080 0.110 2.04 2.79
S0.045 0.055 1.15 1.39
T0.235 0.255 5.97 6.47
U0.000 0.050 0.00 1.27
V0.045 --- 1.15 ---
Z--- 0.080 --- 2.04
B
Q
H
Z
L
V
G
N
A
K
F
123
4
D
SEATING
PLANE
T
C
S
T
U
R
J
STYLE 1:
PIN 1. BASE
2. COLLECTOR
3. EMITTER
4. COLLECTOR
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
TIP29B/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative