DEMO MANUAL DC1508B LTC2974/LTC2975/LTC2977/ LTC2978/LTC2978A Programming Board for PMBus Power System Managers Description The DC1508B programming board contains the circuitry needed to program and verify the EEPROM of the LTC2974, LTC2975, LTC2977, LTC2978, and LTC2978A. This is its sole purpose. The DC1508B is shipped with a clamshell style programming socket installed. The EEPROM contains the factory default configuration. The LTpowerPlayTM *.proj file that corresponds to the factory default can be found in the GUI. To properly program and verify the contents of the EEPROM, download and install the LTpowerPlay software (GUI). http://www.linear.com/ltpowerplay/ You also need a Linear Technology DC1613 USB to SMBus/PMBus Controller. Demo System Required Hardware I2C/ Power System Manager Features n Sequence, Trim, Margin, Supervise Power Supplies n Manage Faults, Monitor Telemetry, Create Fault Logs n PMBus Compliant Command Set n Supported by LTpowerPlay GUI n Margin or Trim Supplies to 0.25% Accuracy n Fast OV/UV Supervisors per Channel n Supports Multichannel Fault Management n Automatic Fault Logging to Internal EEPROM n Operates Autonomously without Additional SW n OV/UV VOUT and One VIN Supervisor n Telemetry Reads Back VIN, VOUT, and Temperature n Windows PC n Time-Based Output Sequencer n USB-to-I2C/SMBus/PMBus Controller (DC1613) n I2C/SMBus Serial Interface n DC1508B-A or DC1508B-B n All Devices Available in 64-lead QFN Package Demo System Required Software n LTpowerPlay Design files for this circuit board are available at http://www.linear.com/demo/DC1508B L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and LTpowerPlay is a trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners. Figure 1. LTC297x Programming Setup Using DC1508B dc1508bf 1 DEMO MANUAL DC1508B Board Photo Figure 2. DC1508B Top Side Details (DC1508B-A Shown) Order Information There are two versions of the DC1508B. Each version of the programming board comes with only one socket. See Table 1. Table 1. Order Number Supported Devices DC1508B-A LTC2977, LTC2978, LTC2978A DC1508B-B LTC2974, LTC2975 LTpowerPlay GUI Software LTpowerPlay is a powerful Windows-based development environment that supports Linear Technology Power System Management ICs with EEPROM. The software supports a variety of different tasks. You can use LTpowerPlay to evaluate Linear Technology ICs by connecting to a demo board system. LTpowerPlay can also be used in an offline mode (with no hardware present) in order to build a multichip configuration file that can be saved and reloaded at a later time. LTpowerPlay provides unprecedented diagnostic and debug features. It becomes a valuable diagnostic tool during board bring-up to program or tweak the power management scheme in a system or to diagnose power issues when bringing up rails. LTpowerPlay utilizes the DC1613 I2C/SMBus/PMBus Controller to communicate with one of many potential targets, including the DC1508B programming board or a customer board. dc1508bf 2 DEMO MANUAL DC1508B LTpowerPlay GUI Software The software also provides an automatic update feature to keep the software current with the latest set of device drivers and documentation. The LTpowerPlay software can be downloaded from: To access technical support documents for LTC Power System Management products visit Help, View Online Help on the LTpowerPlay menu. http://www.linear.com/ltpowerplay Figure 3. Screenshot of the LTpowerPlay GUI dc1508bf 3 DEMO MANUAL DC1508B Quick Start Procedure The DC1508B programming board makes it easy to program and verify the EEPROM contents of the device. 1. Place jumpers and switches in the following default positions. WP: OFF ASEL1: L ASEL0: L S1: OFF 4. Close lid. It will snap into place. See Figure 5. NOTE: Removal and insertion of the IC should be done with either tweezers or a vacuum suction device, and also with the power switch S1 set to OFF. NOTE: By default, the ASEL jumpers are both set to low. If you wish to program a device with an offset address other than 0x5C, adjust the ASEL jumpers appropriately. Consult device data sheet for details. 2. Connect the DC1613 controller to your PC. Plug the ribbon cable into connector J1 of the DC1508B programming board. 3. Open the socket lid. Place the IC inside with pin 1 located in the upper left corner. See Figure 4. Figure 5. DC1613 Ribbon Cable Attached and Lid Closed 5. Set the power switch S1 to the ON position. The VDD33 LED will illuminate, indicating the on-chip regulator is providing internal power. 6. Launch the LTpowerPlay software from your PC. Select Utilities>Programming Utility from the menu. Click "..." next to the selection box and select a .proj file to program the device. Figure 4. Open Clamshell Lid dc1508bf 4 DEMO MANUAL DC1508B Quick Start Procedure 7. LTpowerPlay is ready to program/verify the device. a. Click the Program and Verify button, and wait for the process to complete. 8. Prior to removing the device and programming another, power must be removed from the device. Set the power switch S1 to the OFF position. Open the socket lid. Remove the device with tweezers or a vacuum tool. The USB ribbon cable may remain connected to the programming board. 9. To program another device, repeat Steps 3 through 5, then Steps 7 and 8. LTpowerPlay's Programming Utility does not need to be closed. b. After the process is complete, you will see Successfully Programmed and Verified Device in the status bar at the bottom. dc1508bf 5 DEMO MANUAL DC1508B Parts List ITEM QTY REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBER Required Circuit Components 1 1 U1 (DC1508B-A) or U2 (DC1508B-B) IC SOCKET, SPRING LOADED, 64-QFN PLASTRONICS: 64QN50S19090-A 2 3 C1, C2, C7 CAP CER 1F 16V 10% X7R 0603 MURATA: GRM188R71C105KA12D 3 8 C3, C4, C5, C6, C8, C9, C10, C11 CAP CER 0.1F 16V 10% X7R 0603 MURATA: GRM188R71C104KA01D 4 1 J1 CONN HEADER 12POS 2mm STR DL PCB FCI: 98414-G06-12ULF 5 1 JP1 CONN HEADER 0.100 INCH 1X3POS WURTH: 613 003 111 21 6 2 JP2, JP3 CONN HEADER 0.100 INCH 1X4POS WURTH: 613 004 111 21 7 1 LED1 LED GREEN HIGH BRIGHT ESS SMD PANASONIC: LNJ326W83RA 8 4 MH1, MH2, MH3, MH4 STAND-OFF NYLON 1/4" SNAP IN WURTH: 702 931 000 9 5 R1, R2, R4, R7, R8 RES 10.0k 1/10W 1% 0603 SMD YAGEO: RC0603FR-0710KL 10 1 R3 RES 1.3k 1/10W 1% 0603 SMD YAGEO: RC0603JR-071K3L 11 0 R5, R6 (OPTIONAL) RES 10.0k 1/10W 1% 0603 SMD 12 3 SH1, SH2, SH3 CONN SHUNT 0.1IN 2POS BLACK WURTH: 609 002 134 21 13 1 S1 SW SLIDE DPDT 6VDC 0.3A PCMNT C&K: JS202011CQN 14 4 TP1, TP2, TP3, TP4 TERM SOLDER TURRET 0.219" 0.078"L MILL-MAX: 2501-2-00-80-00-00-07-0 15 1 U3 2k I2C SERIAL EEPROM MICROCHIP TECHNOLOGY: 24AA02T-I/OT dc1508bf 6 1 2 3 Information furnished by Linear Technology Corporation is believed to be accurate and reliable. However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights. GND GND GND LED1 GREEN GND +3V3 C4 100nF GND CONN_DC1613 +5V (100mA) 1 SDA 2 GND 3 SCL 4 +3.3V(100mA) 5 ALRTB 6 GPO_1 7 OUTEN 8 GPO_2 9 GND 10 AUXSCL 11 AUXSDA 12 J1 R3 1.30K GND C3 100nF 1. ALL RESISTORS ARE 1% 0603. 2. ALL CAPACITORS ARE 16V 0603 ASEL0 JP3 1 2 3 4 ASEL1 JP2 1 2 3 4 WP JP1 +3V3 1 2 GND 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 VSENSEM6 VSENSEP7 VSENSEM7 VOUT_ENO VOUT_EN1 VOUT_EN2 VOUT_EN3 VOUT_EN4 VOUT_EN5 VOUT_EN6 VOUT_EN7 VIN_EN DNC VIN_SNS VPWR VDD33 C5 100nF R1 10.0K +5V_DONGLE SDA GND SCL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 U1 LTC2977 LTC2978 LTC2978A VSENSEP3 VSENSEM2 VSENSEP2 VDACM2 VDACP2 VSENSEM1 VSENSEP1 VDACM1 VDACP1 VDACP0 VDACM0 VSENSEM0 VSENSEP0 REFM REFP ASEL1 GND GND R2 10.0K 3 SDA 2 GND 1 SCL VCC 4 WP 5 U3 24AA02 GND GND GND 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 C1 1.0uF 2 5 3 1 6 4 POWER S1 R4 10.0K C6 100nF +3V3 GND +5V R6 10.0K (OPT) FIDUCIALS R5 10.0K (OPT) R7 10.0K R8 10.0K GND GND VSENSEP0 VSENSEM0 VOUT_EN0 VOUT_EN1 VOUT_EN2 VOUT_EN3 AUXFAULTB DNC VIN_SNS VPWR VDD33 VDD33 VDD25 VDD25 TSENSE0 TSENSE1 U2 LTC2974 LTC2975 ISENSEM3 ISENSEP3 ISENSEM2 ISENSEP2 ISENSEM1 ISENSEP1 ISENSEM0 ISENSEP0 REFM GND REFP GND ASEL1 ASEL0 TSENSE3 CONTROL1 CUSTOMER NOTICE ASEL0 ASEL1 ALERTB PCB DES. SCALE = NONE APP ENG. B www.linear.com GND SDA GND C11 100nF SCL GND 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 PRODUCTION SCL GND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 SDA WP FAULTB_PU GND GND C10 100nF C8 100nF WDI/RESET C9 100nF +3V3 C7 1.0uF +5V PAD C2 1.0uF +5V PAD 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 VSENSEM1 VSENSEP1 VSENSEM2 VSENSEP2 NC GND/NC VDAC3 VDAC2 IIN_SNSM IIN_SNSP VDAC1 VDAC0 GND/NC VIN_SNS_CAP VSENSEM3 VSENSEP3 PWRGD SHARE_CLK GND GND GND CONTROL2 CONTROL3 WDI/RESETB FAULTB0 FAULTB1 TSENSE2 WP SDA SCL ALERTB CONTROL0 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 VSENSEP6 VSENSEM5 VSENSEP5 VDACM7 VDACP7 VDACP6 VDACM6 VDACM5 VDACP5 VDACP4 VDACM4 VSENSEM4 VSENSEP4 VDACM3 VDACP3 VSENSEM3 VDD33 VDD25 WP PWRGD SHARE_CLK WDI/RESETB FAULTB00 FAULTB01 FAULTB10 FAULTB11 SDA SCL ALERTB CONTROL0 CONTROL1 ASEL0 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 - MIKE P. LTC CONFIDENTIAL FOR CUSTOMER USE ONLY 10-28-13 DEMO MANUAL DC1508B Schematic Diagram dc1508bf 7 DEMO MANUAL DC1508B DEMONSTRATION BOARD IMPORTANT NOTICE Linear Technology Corporation (LTC) provides the enclosed product(s) under the following AS IS conditions: This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY and is not provided by LTC for commercial use. As such, the DEMO BOARD herein may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including but not limited to product safety measures typically found in finished commercial goods. As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic compatibility and therefore may or may not meet the technical requirements of the directive, or other regulations. If this evaluation kit does not meet the specifications recited in the DEMO BOARD manual the kit may be returned within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY THE SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THIS INDEMNITY, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user releases LTC from all claims arising from the handling or use of the goods. Due to the open construction of the product, it is the user's responsibility to take any and all appropriate precautions with regard to electrostatic discharge. Also be aware that the products herein may not be regulatory compliant or agency certified (FCC, UL, CE, etc.). No License is granted under any patent right or other intellectual property whatsoever. LTC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or any other intellectual property rights of any kind. LTC currently services a variety of customers for products around the world, and therefore this transaction is not exclusive. Please read the DEMO BOARD manual prior to handling the product. Persons handling this product must have electronics training and observe good laboratory practice standards. Common sense is encouraged. This notice contains important safety information about temperatures and voltages. For further safety concerns, please contact a LTC application engineer. Mailing Address: Linear Technology 1630 McCarthy Blvd. Milpitas, CA 95035 Copyright (c) 2004, Linear Technology Corporation dc1508bf 8 Linear Technology Corporation LT 0514 * PRINTED IN USA 1630 McCarthy Blvd., Milpitas, CA 95035-7417 (408) 432-1900 FAX: (408) 434-0507 www.linear.com LINEAR TECHNOLOGY CORPORATION 2014