Cable Ties/Wiring Accessories Catalog--WW-CTCB03 (replaces SA-101N275C-WC) Table of Contents Cable Ties and Installation Tooling Available Styles PAN-TY (R) Locking Cable Ties, Locking Lashing Ties, Releasable Ties, Releasable Lashing Ties, Clamp Ties, Marker and Flag Ties, Winged Push Mount Ties, Push Mount Ties, Weather Resistant Ties, Polypropylene Ties, Flame Retardant Ties, Nylon 12 Ties, HALAR* Ties, TEFZEL ** Ties, Fluorescent Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26 DOME-TOP (R) Barb Ty Cable Ties, Clamp Ties, Marker Ties, DURA-TY TM WR Cable Ties, Heat Stabilized Ties, Winged Push Mount Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-35 Parallel Entry (CONTOUR-TY (R) Cable Ties, BELT -TY TM IN-LINE Cable Ties, IN-LINE Cable Ties) . . . . . . . 36-39 Hook & Loop Cable Ties (TAK -TY (R) Hook & Loop Cable Ties, Hook & Loop Strips/Rolls) . . . . . . . . . . . . 40-42 S TA -STRAP (R) Clamp Ties, Cable Ties, Chassis/Panel Mount Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-45 Specialty Ties (Stud Mounted Heat Stabilized, Releaseable Stud Mounted "Ladder" Cable Ties, Multiple Loop, Double Hose Clamp, Polyethylene Marker Strap) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-50 P AN -P OUCH TM Telephone Cable Identification Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Cable Tie Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Cable Tie Installation Tools (manual/pneumatic/automatic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-61 Available Materials Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13, 28, 30-33, 36-38, 43, 47 Heat Stabilized Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 30, 44, 46 Weather Resistant Nylon 6.6 Cable Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-18, 29, 31, 36, 38, 47, 48 Polypropylene Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19 Flame Retardant Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Weather Resistant Nylon 12 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 HALAR* and TEFZEL** Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Fluorescent Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Weather Resistant Acetal Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Hook & Loop Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-42 Polyethylene Marker Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Additional Information Lashing Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 15, 16 Military Cross Reference Aerospace Standard Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Custom Hot Stamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Selecting the Proper Cable Tie Material for Your Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Material Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Weathering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65 Flammability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-67 Radiation/Moisture/Temperature/Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Physical Characteristics of Cable Tie Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Chemical Resistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-74 Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-76 Stainless Steel Tie Products PAN-STEEL (R) Stainless Steel Tie . . . . . . . . . . . . . . . . . WAVE -TY TM Superior Grip Standard Steel Tie. . . . . . . . Stainless Steel Tie Installation Tools . . . . . . . . . . . . . Metal Marker Plates/Tags/Marking Devices . . . . . . . Stainless Steel Strapping . . . . . . . . . . . . . . . . . . . . . . ......... ......... ......... ......... ......... ........ ........ ........ ........ ........ ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... . . . . . . . 77 . . . . . . . 77 . . . . . . . 78 . . . . . . . 78 . . . . . . . 80 Wiring Accessories Cable Tie Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-107 Wiring Accessories -- used without cable ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108-123 Harness Board Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124-129 Communication Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130-133 Selection and Use of Adhesive Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134-136 Abrasion Protection Products (Heat Shrink, Non-Shrink PVC Tubing, Spiral Wrap, Grommet Edging and Braided Expandable Sleeving) . . . . . . . . . . . . . . . . . . . . . . . . . 139-181 *HALAR is a registered trademark of Solvay Solexis, Inc. ** TEFZEL is a registered trademark of E.I. DuPont de Nemours Co. All reference dimensions in this catalog are shown in inches (and millimeters). 1 World Leader in Cable Ties and Wiring Accessories PANDUIT (R) is a leading global producer of cable ties and wiring accessories, offering the most complete selection of sizes, styles and materials. We continually provide new cable tie and wiring accessory designs to meet the changing application challenges encountered by our customers while providing lowest installed costs. PANDUIT (R) also offers the largest selection of ergonomic cable tie installation tools -- from high speed automatic systems to hand operated tools. So, whatever the need, PANDUIT (R) has the tool to help lower your total installed cost. Assured Quality ISO 9001 To help assure optimum quality, PANDUIT (R) products are designed and manufactured to meet applicable international, UL, military and customer standards: The International Standards Organization (ISO) establishes worldwide standards for products and services in recognition of increasing globalization of markets. The ISO program sets up the requirements for quality assurance systems of these worldwide standards. PANDUIT (R) is registered to ISO 9001, the most comprehensive model in the standard, meant for companies who design, manufacture, install and service the products they sell. Registration has been awarded by Underwriters Laboratories (Certificate No. A2269) after extensive audit of QA systems employed at PANDUIT (R). QS-9000 is the shorthand name for "Quality System Requirements QS-9000." It is the common supplier quality standard for the automotive industry. QS-9000 is based on the 1994 edition of ISO 9001, but it contains additional requirements that are particular to the automotive industry. These additions are considered automotive "interpretations" by the ISO community of accreditation bodies and registrars. Registration has been awarded by Underwriters Laboratories Inc. (Certificate No. A2269) for PANDUIT (R) cable ties. QS-9000 ISO14001 is a voluntary standard for Environmental Management Systems established by the International Organization for Standardization. The international standard provides a benchmark for continual improvement in environmental performance. Business partners can be confident that the PANDUIT (R) manufacturing facilities around the globe are engaged in an on-going process to maximize value while minimizing impact on global natural resources. ISO14001 Underwriters Laboratories, Inc. (File E56854) Most PANDUIT (R) miniature, intermediate, standard, light-heavy and heavy cross-section ties are Recognized (ZODZ(8)) or Listed in the US and Canada by Underwriters Laboratories (ZODZ(7)) in their Directory under the category "Wire Positioning Devices." Natural, pigmented and weather resistant cable ties are recognized for indoor use at temperatures up to 85 C (185F). Weather resistant cable ties are also UL Listed for outdoor applications. Heat stabilized ties are UL Recognized and Listed for indoor use at temperatures up to 115C (239F). Aerospace Standard AS23190 Aerospace Standard SAE spec AS23190 covers the actual test requirements on cable ties. PANDUIT (R) cable ties, when tested, either meet or exceed the requirements of this specification. Nuclear Regulatory Commission The NRC developed rules and regulations concerning Quality Assurance Criteria for Nuclear Power Plants or Title 10, Chapter 10, Part 50, Appendix B (10CFR50). PANDUIT (R) Corp. Quality Assurance program is designed to satisfy the 18 criteria set forth in NRC 10CFR50, Appendix B, Military Specification AS23190. Ford Motor Company PANDUIT (R) has received Q1 certification status from Ford Motor Company. Q1 certification enables all PANDUIT (R) cable tie manufacturing facilities to approve all initial samples and production shipments of the parts destined for Ford operations throughout the world. International Approvals Independent Testing Facilities K German (VG) Military 2 Lloyd's Register of Shipping RINA Most commonly used parts appear in BOLD. Germanischer Lloyd Nippon Kaiji Kyokai Det Norske Veritas Bureau Veritas R Korean Register of Shipping Everywhere you need us! Styles of Cable Ties Selection Guide PAN-TY (R) Cable Ties DOME-TOP (R) Barb Ty Cable Ties This line offers the largest selection of styles, materials, and sizes. The ties are available in nylon 6.6, nylon 12, polypropylene, HALAR* and TEFZEL** material. Available in sizes from .60" (15mm) maximum bundle diameter up to 13" (330mm) maximum bundle diameter. All are self-locking and many sizes are available in both releasable and non-releasable types. PAN -TY (R) Cable Ties are quickly installed by hand or with PANDUIT (R) installation tools. These cable ties provide consistent performance and reliability for those users who prefer a cable tie with a stainless steel locking barb. They are infinitely adjustable through their entire bundle range. On selected popular sizes, the additional length of DOME -TOP (R) Barb Ty Cable Ties provides an average of 30% more bundle area than other metal barb cable ties. Available in sizes from .90" (23mm) maximum bundle diameter up to 9.0" (229mm) maximum bundle diameter and may be installed by hand or with PANDUIT (R) installation tools. DURA-TY TM Cable Ties Parallel Entry Cable Ties DURA -TY TM is a heavy-duty cable tie that is ideal for all outdoor applications requiring high strength and longer life. The acetal strap and head provides excellent UV light resistance and high tensile strength. The smooth, rounded edges on the head and body do not irritate the hands. The ties are easy to install. Available in standard lengths or dispenser rolls for easy, cut to length convenience in custom applications. Parallel Entry Ties are comprised of the CONTOUR -TY (R), BELT-TY TM and IN-LINE Cable Tie families. CONTOUR -TY (R) Cable Tie's fully enclosed locking wedge insures consistent strength, lasting performance and it is available in a new heavystandard cross section. BELT-TY TM Cable Ties have low profile heads which help avoid snags and reduce overall bundle size. IN-LINE Cable Ties are exceptional for applications that require conformity to large bundles. Unique IN-LINE design forms completely around the bundle, increasing the contact area. Serrations on the side of the head assure positive grip during threading of the tie and increases installation speed. *HALAR is a registered trademark of Solvay Solexis, Inc. ** TEFZEL is a registered trademark of E.I. DuPont de Nemours Co. Most commonly used parts appear in BOLD. 3 Styles of Cable Ties Selection Guide (cont.) TAK-TY (R) Hook & Loop Cable Ties STA-S TRAP (R) Cable Ties PANDUIT (R) TAK-TY (R) Hook & Loop Cable Ties are ideal for applications that require frequent cabling moves, adds and changes. They can be used to secure a wide variety of various sizes of cable bundles. Wide color choice allows for quick and easy color coding of separate cable bundles. STA-STRAP (R) Cable Ties offer several unique features. Harness modifications during assembly are made easy as the two-piece design affords releasability prior to final tensioning and cut-off. The ties are extremely flexible and lightweight. They also provide the lowest thread force in the industry which reduces operator fatigue. The unique design allows this cable tie to secure a bundle directly to a panel without the need for additional fasteners or mounting devices and reduces installation costs. Specialty Ties Stainless Steel Ties and Strapping PANDUIT (R) continually develops new products to help solve the unique application problems of our customers. One of these products is the polyethylene cable marker strap that is used for identifying telephone and fiber optic cable, which typifies the design/manufacturing capability of PANDUIT (R) to respond to these special needs. Underground, underwater, indoors, outdoors -- however hostile the environment -- PANDUIT (R) Stainless Steel Ties and Strapping fasten and identify components and cables quickly and easily. Stainless steel ties stand up to most chemicals, to nuclear and ultraviolet radiation, to seawater and direct burial in any soil, and to temperature extremes from -112F to 1700F (-80C to 925C). 4 Most commonly used parts appear in BOLD. PAN -TY (R) Cable Ties PAN-TY (R) Cable Tie Features/Benefits: 1. One Piece Construction 2. Smooth, Round Edges 3. Tensile Strength * Consistent performance and reliability * Available in lengths from 2.8" (71mm) up to 43.3" (1100mm) to meet a variety of application requirements * No irritation to installer's hands, increases productivity * Prevents damage to wire insulation * Exceeds Industry and Aerospace Standards SAE (AS23190) standards * Available in seven loop tensile strengths from 8 lbs. (36N) up to 250 lbs. (1112N) to provide an economical selection 4. Curved Tip 5. Finger Tip Grip 6. More Teeth Per Inch * Orients tip toward head to speed installation -- lowers installed cost * Faster initial threading * Easier to pick up from flat surfaces * Finger tip grip on selected sizes assures positive grip during threading of the tie * Grip prevents tip from slipping out of cable tie head during threading * Greater number of small uniform teeth provides tighter bundles * Because they are flush with surface they provide proper wire bundle grip without wire insulation damage 7. Low Threading Force 8. One Piece Locking Design 9. Material Availability * Lowest threading force of any one piece cable tie in the industry * Reduces operator fatigue * Thin tapered tip facilitates threading, easier initial insertion * Multiple locking tooth design provides greater strength and reliability * Available in self locking or releasable styles for use in applications where changes are anticipated * Available in a variety of materials to meet the needs of special environments * Properly selected ties can be used indoors or outdoors with assurance of long lasting performance Most commonly used parts appear in BOLD. 5 Nylon 6.6 Locking Cable Ties (PLT Series) PAN-TY (R) Nylon 6.6 Locking Cable Ties -- Curved Tip These versatile fasteners can be used in countless applications wherever you need to bundle wire, cable, or hose. They tie bundle diameters up to 13" (330mm), they also can be joined together for even larger diameters. They have a minimum loop tensile strength from 8 lbs. (36N) to 250 lbs. (1112N). Colors are available for specific color-coding applications (see pages 24-26). B E A REF. Except PLT.6SM-C C D CURVED TIP Cable Ties for Automatic Tools See Page 61. SUBMINIATURE AND MINIATURE CROSS SECTION Part Number Length Width A B in. (mm) in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. .125 (3.2) .60 (15) 8 (36) GTS, PTS 100 1000 1000 50000 100 1000 1000 50000 100 1000 1000 50000 100 1000 1000 50000 2.00 (51) 100 1000 1000 25000 1.38 (35) 100 1000 1000 25000 2.00 (51) 100 1000 1000 25000 100 1000 1000 10000 3.00 (76) 100 1000 1000 10000 4.00 (102) 100 1000 1000 10000 1.00 (25) 100 1000 1000 25000 1.50 (38) 100 1000 1000 25000 1.88 (48) 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 4.00 (102) 100 1000 1000 5000 PLT.6SM-C 2.8 (71) .070 (1.8) .030 (.8) .095 (2.4) PLT.7M-C 3.1 (79) .090 (2.3) .032 (.8) .115 (2.9) PLT1M-C 3.9 (99) PLT1.5M-C 5.6 (142) PLT2M-C 8.0 (203) .098 (2.5) Packaging* Thickness C in. (mm) .043 (1.1) .154 (3.9) .68 (17) .180 (4.6) .87 (22) 1.25 (32) 18 (80) GTS, GS2B, PTS, PPTS or STS2 INTERMEDIATE CROSS SECTION PLT1.5I-C 5.6 (142) PLT2I-C 8.0 (203) PLT2.5I-C 9.7 (246) PLT3I-C 11.4 (290) PLT4I-C 14.5 (368) .142 (3.6) .045 (1.1) .240 (6.1) 2.50 (64) .180 (4.6) .145 (3.7) .052 (1.3) .260 (6.6) 40 (178) GTS, GS2B, PTS, PPTS or STS2 STANDARD CROSS SECTION 6 PLT1S-C 4.8 (122) PLT1.5S-C 6.2 (157) PLT2S-C 7.4 (188) PLT2.5S-C 9.8 (249) .316 (8.0) .190 (4.8) .052 (1.3) 2.50 (64) .220 (5.6) 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 PLT3S-C 11.5 (292) PLT4S-C 14.5 (368) PLT4.5S-C 15.5 (394) 4.50 (114) 100 1000 1000 5000 PLT5S-C 17.5 (445) 5.00 (127) 100 500 1000 5000 Most commonly used parts appear in BOLD. 3.00 (76) .337 (8.6) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26. All part numbers shown in standard package quantities unless denoted by . Nylon 6.6 Locking Cable Ties (PLT Series) Light-Heavy and Heavy Cross Section B E A REF. C D Part Number Length Width A B in. (mm) in. (mm) Thickness C in. (mm) Head Height D in. (mm) STRAIGHT TIP Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Except PLT5H, 6H, 8H and 13H Recommended PANDUIT (R) Installation Tool Part No. Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 50 500 100 2000 50 500 100 2000 50 500 100 2000 50 500 100 1000 LIGHT-HEAVY CROSS SECTION PLT6LH-L 21.9 (556) 6.00 (152) PLT7LH-L 24.7 (627) 7.00 (178) PLT8LH-L 27.6 (701) PLT9LH-L 30.5 (775) 9.00 (229) PLT10LH-L 34.3 (871) 10.31 (262) 50 1000 100 1000 2.00 (51) 50 500 250 2500 50 500 250 2500 50 500 250 2500 50 500 250 2500 50 500 100 2500 50 500 100 2000 50 500 100 1000 25 500 100 500 .300 (7.6) .075 (1.9) .325 (8.3) .480 (12.2) 8.00 (203) GTH, GS4H, GS4EH PPTEH, ST2EH or STH2 120 (534) HEAVY CROSS SECTION PLT2H-L 8.1 (206) PLT2.5H-L 9.8 (251) .300 (7.6) .075 (1.9) .290 (7.4) .480 (12.2) 2.50 (64) PLT3H-L 11.4 (290) PLT4H-L 14.5 (368) 4.00 (102) PLT5H-L 17.7 (450) 5.00 (127) PLT6H-L 20.9 (530) PLT8H-L 30.6 (779) PLT13H-Q 43.3 (1100) .350 (8.9) .078 (2.0) .340 (8.6) .560 (14.2) 120 (534) 3.00 (76) GTH, GS4H, GS4EH PPTEH, ST2EH or STH2 6.00 (152) 175 (778) 9.00 (229) 13.00 (330) Lashing Ties typically are used on heavy duty jobs such as securing conduit or large cable bundles to permanent structures, indoors or out. Can be used with MCEH mounting clip (see page 16). PAN-TY (R) Locking Lashing Ties E B PANDUIT A REF. C D Part Number Length Width A B in. (mm) in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 2.00 (51) -- -- 100 1000 5.00 (127) 25 250 100 1000 25 250 100 1000 -- -- 100 1000 10.00 (254) -- -- 100 500 12.00 (305) -- -- 100 500 EXTRA-HEAVY CROSS SECTION PLT2EH-C 9.0 (229) PLT5EH-Q! 20.1 (511) PLT6EH-Q! 22.2 (564) PLT8EH-C 28.3 (719) PLT10EH-C 34.2 (869) PLT12EH-C 40.1 (1019) .075 (1.9) .500 (12.7) .40 (10.2) .085 (2.2) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26. All part numbers shown in standard package quantities unless denoted by . ! Available without buckle for applications that do not require mounting. .80 (20.3) 6.00 (152) 8.00 (203) 250 (1112) GS4EH, PPTEH or ST2EH Most commonly used parts appear in BOLD. 7 Nylon 6.6 Releasable Cable Ties (PRT Series) PAN-TY (R) Releasable Nylon 6.6 Cable Ties The extended tab end of releasable cable ties permits easy release and re-use even after the tie has been pulled up snug by hand. Releasable ties are particularly useful in applications where changes are anticipated during development, production or servicing in the field. E B A REF. STRAIGHT TIP CURVED TIP C D Head design for Standard Cross Section Ties To release, grasp the head of the cable tie, deflect release tab and pull the cable tie away from the bundle. Head design for Heavy Cross Section Ties Except Heavy Ties Part Number Length Width A B in. (mm) in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 1.00 (25) 100 1000 1000 10000 1.50 (38) 100 1000 1000 10000 100 1000 1000 10000 3.00 (76) 100 1000 1000 10000 4.00 (102) 100 1000 1000 5000 2.00 (51) 50 500 250 2500 50 500 250 2500 50 500 250 2500 Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 2.00 (51) -- -- 100 1000 5.00 (127) 25 250 100 1000 25 250 100 1000 -- -- 100 1000 10.00 (254) -- -- 100 500 12.00 (305) -- -- 100 500 STANDARD CROSS SECTION PRT1S-C 4.8 (122) PRT1.5S-C 6.3 (160) PRT2S-C 7.4 (188) PRT3S-C 11.5 (292) PRT4S-C .316 (8.0) .190 (4.8) .052 (1.3) 1.88 (48) .219 (5.6) .337 (8.6) 14.5 (368) 50 (222) Hand Installed Only HEAVY CROSS SECTION PRT2H-L 8.4 (213) PRT3H-L 11.4 (290) PRT4H-L 14.5 (368) .300 (7.6) .075 (1.9) .300 (7.6) 3.00 (76) .480 (12.2) 80 (356) Hand Installed Only 4.00 (102) PAN-TY (R) Releasable Lashing Ties -- Nylon 6.6 E B PANDUIT A REF. C D Part Number Length Width A B in. (mm) in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Packaging* EXTRA-HEAVY CROSS SECTION PRT2EH-C 9.0 (229) PRT5EH-Q 20.1 (510) PRT6EH-Q 22.2 (564) PRT8EH-C 28.3 (719) PRT10EH-C 34.2 (869) PRT12EH-C 40.1 (1019) 8 .075 (1.9) .500 (12.7) .40 (10.2) .085 (2.2) Most commonly used parts appear in BOLD. .80 (20.3) 6.00 (152) 8.00 (203) 250 (1112) Hand Installed Only *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26. All part numbers shown in standard package quantities unless denoted by . Nylon 6.6 Locking Clamp Ties (PLC Series) PAN-TY (R) Nylon 6.6 Clamp Ties Clamp ties are used to attach a bundle to another surface such as a control panel, wall or ceiling using another fastener. The design allows for bundling before or after screwing clamp in place. F B E A REF. C D Part Number Length Width Thickness A B C in. (mm) in. (mm) in. (mm) Boss Height D in. (mm) Boss Hole Max. Width Dia. Screw Bundle E F Size Dia. in. (mm) in. (mm) (Metric) in. (mm) Min. Loop Recommended Tensile PANDUIT (R) Strength Installation Tool Part No. Lbs. (N) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. MINIATURE CROSS SECTION PLC1M-S4-C 4.3 (110) .100 (2.5) .045 (1.2) .153 (3.9) .239 (6.1) .118 (3.0) #4 (M2.5) .75 (20) 18 (80) GTS, GS2B, PTS, PPTS or STS2 100 1000 1000 50000 .045 (1.2) .166 (4.2) .335 (8.5) .172 (4.4) #8 (M4) 1.25 (32) 40 (178) GTS, GS2B, PTS, PPTS or STS2 100 1000 1000 25000 #6 (M3) 1000 1000 10000 .160 (4.1) .145 (3.7) 100 .047 (1.2) 100 1000 1000 10000 100 1000 1000 5000 100 1000 1000 5000 50 500 250 2500 50 500 250 2500 INTERMEDIATE CROSS SECTION PLC1.5I-S8-C 6.1 (156) .135 (3.4) STANDARD CROSS SECTION PLC2S-S6-C PLC2S-S10-C PLC3S-S10-C PLC4S-S10-C 7.9 (201) 7.9 (201) 12.0 (305) .190 (4.8) 15.0 (381) .373 (9.5) .052 (1.3) .220 (5.6) .075 (1.9) .265 (6.7) #10 (M5) .206 (5.2) 1.84 (47) #10 (M5) 3.00 (76) #10 (M5) 4.00 (102) 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 HEAVY CROSS SECTION PLC2H-S25-L PLC4H-S25-L 9.0 (228) 15.1 (384) .300 (7.6) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26. All part numbers shown in standard package quantities unless denoted by . .500 (12.7) .260 (6.6) 1/4 (M6) 2.00 (51) 4.00 (102) 120 (534) GTH, GS4H, GS4EH,PPTEH STH2 or ST2EH Most commonly used parts appear in BOLD. 9 Nylon 6.6 Marker and Flag Ties (PLF /PLM Series) PAN-TY (R) Nylon 6.6 Marker and Flag Ties Marker and Flag Ties fasten and identify bundles at the same time. They can be marked with PANDUIT (R) Marker Pens or you can use PANDUIT (R) Custom Hot Stamping Service. B E A REF. C D PLM1M PLM1M PLM2M Part Number Length Width Thickness A B C in. (mm) in. (mm) in. (mm) Head Height D in. (mm) PLF1M Head Width E in. (mm) Max. Bundle Dia. in. (mm) Write-on Area in. (mm) PLF1MB PLF1MA Min. Loop Recommended Std. Tensile PANDUIT (R) Installation Pkg. Strength Tool Part No. Qty.* Lbs. (N) Packaging* Std. Ctn. Qty. Bulk Pkg. Qty. 100 1000 1000 25000 100 1000 1000 25000 100 1000 1000 25000 100 1000 1000 10000 100 1000 1000 10000 Bulk Ctn. Qty. MINIATURE CROSS SECTION PLF1M-C 4.3 (109) PLF1MA-C 5.1 (130) PLF1MB-C 4.0 (101) PLM1M-C PLM2M-C .31 X .75 (7.9 X 19.1) .76 X 1.04 (19.1 X 26.4) .045 (1.1) .098 (2.5) 3.9 (99) .154 (3.9) .180 (4.6) .31 X .92 (7.9 X 23.4) .75 (19) .26 X .95 (6.6 X 24.1) .035 (.9) 8.0 (203) .87 (22) 18 (80) GTS, GS2B, PTS, PPTS or STS2 2.00 (51) PLM2S PLM4S PL3M2S PL2M2S Packaging* Length Width Thickness A B C Part Number in. (mm) in. (mm) in. (mm) Head Height D in. (mm) Head Width E in. (mm) Write-on Area in. (mm) Max. Bundle Dia. in. (mm) .44 x .87 (11.1 x 22.1) 1.75 (45) .44 x 2.00 (11.1 x 50.8) 4.00 (102) .87 x 1.07 (22.1 x 27.2) 1.75 (45) .87 x 1.79 (22.1 x 45.5) 1.75 (45) Min. Loop Recommended Std. Tensile PANDUIT (R) Installation Pkg. Strength Tool Part No. Qty.* Lbs. (N) Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 1000 500 10000 100 1000 500 5000 50 500 500 2500 50 500 500 2500 STANDARD CROSS SECTION PLM2S-C 7.4 (188) PLM4S-C 14.6 (371) PL2M2S-L 7.4 (188) PL3M2S-L 7.4 (188) .185 (4.7) .052 (1.3) .220 (5.6) .320 (8.1) Marker Ties are also available in weather resistant black nylon for outdoor use. May be marked with PANDUIT (R) 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 PX-10 White Marking Pen found on page 105. Custom Hot Stamping Available; See page 52. 10 Most commonly used parts appear in BOLD. *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26. All part numbers shown in standard package quantities unless denoted by . Nylon 6.6 Winged Push Mount Ties (PLWP/PRWP Series) Push mount ties are used to attach a cable bundle to a surface such as a flat panel. The anchor is easily pressed into a pre-drilled hole and locks in place. The wings provide constant tension when installed, creating a stable, secure fixture and rattle-free installation. PAN-TY (R) Nylon 6.6 Winged Push Mount Ties B PLWP A REF. D C B PRWP A REF. D C Winged Nylon 6.6 Push Mount Ties -- Locking Style (PLWP) Part Number Head Length Width Thickness Height A B C D in. (mm) in. (mm) in. (mm) in. (mm) Nominal Max. Max. Hole Panel Bundle Dia. Thickness Dia. in. (mm) in. (mm) in. (mm) Min. Loop Recommended Std. Tensile PANDUIT (R) Installation Pkg. Strength Tool Part No. Qty. Lbs. (N) Packaging* Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. MINIATURE CROSS SECTION PLWP1M-C 4.3 (109) .098 (2.5) .044 (1.1) .220 (5.6) .187 (4.7) .093 (2.4) .87 (22) 18 (80) GTS, GS2B, PTS, PPTS or STS2 100 1000 500 5000 .280 (7.1) .187 (4.7) .093 (2.4) 1.25 (32) 40 (178) GTS, GS2B, PTS, PPTS or STS2 100 1000 500 5000 .252 (6.4) .105 (2.7) .093 (2.4) .157 (4.0) .105 (2.7) .093 (2.4) .105 (2.7) .093 (2.4) .157 (4.0) 100 1000 500 5000 -- -- 500 5000 -- -- 500 5000 -- -- 500 5000 -- -- 500 5000 100 1000 500 5000 -- -- 500 5000 -- -- 500 5000 -- -- 250 2500 -- -- 250 2500 100 1000 500 5000 100 1000 500 5000 -- -- 500 5000 -- -- 500 5000 -- -- 500 5000 -- -- 250 2500 INTERMEDIATE CROSS SECTION PLWP1.5I-C 6.0 (152) .135 (3.4) .045 (1.2) STANDARD CROSS SECTION PLWP1S-C PLWP1SA-D PLWP1SB-D PLWP1.5S-D PLWP1.5SA-D PLWP2S-C PLWP2SA-D PLWP2SB-D 5.2 (132) 5.1 (130) 5.2 (132) 6.8 (173) 6.7 (170) 7.8 (198) 7.7 (196) 7.8 (198) .187 (4.7) .190 (4.8) .052 (1.3) .370 (9.4) .252 (6.4) .187 (4.7) .252 (6.4) .187 (4.7) 1.00 (25) 1.50 (38) 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 1.75 (45) 1.75 (45) HEAVY CROSS SECTION PLWP2H-TL PLWP3H-TL 8.9 (226) 12.0 (305) .300 (7.6) .075 (1.9) .370 (9.4) .266 (6.8) .105 (2.7) 2.00 (51) 3.00 (76) 120 (534) GTH, GS4H, STH2 or PPTEH Winged Nylon 6.6 Push Mount Ties -- Releasable Style (PRWP) STANDARD CROSS SECTION PRWP1S-C PRWP1SA-C PRWP1SB-D PRWP1.5S-D PRWP2S-D 5.2 (132) 5.1 (130) 5.2 (132) 6.8 (173) 7.8 (198) .266 (6.8) .190 (4.8) .052 (1.3) .370 (9.4) .105 (2.7) .093 (2.4) .157 (4.0) 1.00 (25) .252 (6.4) .105 (2.7) 1.50 (38) 1.75 (45) .266 (6.8) .105 (2.7) 2.00 (51) .187 (4.7) 50 (222) Hand Installed Only HEAVY CROSS SECTION PRWP2H-TL 8.9 (226) .300 (7.6) .075 (1.9) .370 (9.4) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26. All part numbers shown in standard package quantities unless denoted by . 120 (534) Hand Installed Only Most commonly used parts appear in BOLD. 11 Heat Stabilized Nylon 6.6 Push Mount Ties (PLWP/PRLWP Series) Center mounted winged push mount cable ties center the bundle on all bundle diameters. PAN -TY (R) Center Mounted Heat Stabilized Nylon 6.6 Winged Push Mount Ties B A REF. C D PLWP30, 40, 50SC winged push mount cable ties are for normal wire bundles. PLWP40SD winged push mount cable ties with convoluted tubing bump that prevents lateral and axial movement on convoluted tubing. PLWP50SE winged push mount cable ties with convoluted tubing bump that prevents lateral movement on convoluted tubing. BUNDLE DIAMETERS from .12" to 1.97" (3mm to 50mm) Packaging* Part Number Head Nominal Max. Max. Length Width Thickness Height Hole Panel Bundle A B C D Dia. Thickness Dia. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 500 5000 -- -- 500 5000 -- -- 500 5000 STANDARD CROSS SECTION PLWP30SC-D30 5.8 (147) 1.18 (30) PLWP40SC-D30 7.0 (178) 1.58 (40) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 PLWP50SC-D30 8.2 (208) PLWP40SD-D30 7.0 (178) 1.58 (40) -- -- 500 5000 PLWP50SE-D30 8.2 (208) 1.97 (50) -- -- 500 5000 .190 (4.8) .050 (1.3) .220 (5.6) .266 (6.8) .118 (3.0) 1.97 (50) 50 (222) Ladder Style Heat Stabilized Nylon 6.6 Winged Push Mount Ties B Unique releasable ladder design eliminates the need for multiple clamp sizes. Part Number A C D Head Nominal Max. Max. Length Width Thickness Height Hole Panel Bundle A B C D Dia. Thickness Dia. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. 35 (156) Hand Installed Only Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 500 5000 -- -- 500 5000 STANDARD CROSS SECTION PRLWP30S-D30 PRLWP50S-D30 12 4.7 (119) 7.1 (180) .380 (9.7) .050 (1.3) Most commonly used parts appear in BOLD. .470 (12) .256 (6.5) .118 (3.0) 1.43 (36) 2.18 (55) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26. All part numbers shown in standard package quantities unless denoted by . Nylon 6.6 Push Mount Ties (PLUP/PLP Series) The anchor snaps into a hole in a light gauge metal or plastic panel. No screws or other fasteners required. The umbrella shaped disc stabilizes the anchor and insures a tight, rattle-free fit. In addition, the umbrella disc provides a dust-tight and semi-liquid tight seal against the panel surface. The material is heat stabilized, black Nylon 6.6. PANDUIT (R) Umbrella Winged Push Mount Cable Ties B A REF. C Packaging* Nominal A B C Hole Length Width Thickness Diameter in. (mm) in. (mm) in. (mm) in. (mm) Part Number Max. Panel Thickness in. (mm) Max. Bundle Diameter in. (mm) Min. Loop Tensile Strength Lbs. (N) .050 (1.3) 1.57 (40) 49 (218) Recommended PANDUIT (R) Installation Tool Part No. Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 500 5000 -- -- 500 5000 STANDARD CROSS SECTION PLUP40S-D30 *PLUP40SE-D30 7.0 (177) .190 (4.8) .047 (1.2) .266 (6.8) GTS, GS2B, GTH, GS4H, PTH or PPTS *For use with Corrugated Loom Tubing. PAN -TY (R) Nylon 6.6 Push Mount Ties (Style PLP) B Head design for standard cross section ties A REF. Head design for intermediate cross section ties D C Economical Push Mount Tie Style Packaging* Part Number A Length in. (mm) B Width in. (mm) C Thickness in. (mm) D Head Height in. (mm) Nominal Hole Diameter in. (mm) .236 (6.0) .187 (4.7) Max. Maximum Min. Loop Panel Bundle Tensile Thickness Diameter Strength in. (mm) in. (mm) Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 1000 25000 100 1000 1000 10000 -- -- 1000 10000 100 1000 1000 10000 INTERMEDIATE CROSS SECTION PLP1.5I-M 6.1 (156) .135 (3.4) .045 (1.1) .090 (2.4) 1.25 (31.8) 40 (178) GTS, GS2B, PTS, PPTS or STS2 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 STANDARD CROSS SECTION PLP1S-C 5.3 (134) PLP1.5S-M 6.7 (170) PLP2S-C 7.9 (200) 1.00 (25) .180 (4.6) .50 (1.3) .354 (9.0) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26. All part numbers shown in standard package quantities unless denoted by . .250 (6.4) .130 (3.2) 1.50 (38) 1.75 (45) Most commonly used parts appear in BOLD. 13 Weather Resistant Nylon 6.6 Cable Ties (PLT Series) Weather resistant nylon has greater resistance to ultraviolet light which damages natural nylon. Where adverse outdoor conditions exist, see technical/application data section (pages 64-65) to select proper cable tie material for specific applications. PAN -TY (R) Weather Resistant Nylon Cable Ties B E A REF. C D CURVED TIP SUBMINIATURE AND MINIATURE CROSS SECTION Part Number PLT.6SM-C0 PLT1M-C0 PLT1.5M-C0 PLT2M-C0 Length Width A B in. (mm) in. (mm) 2.8 .070 (71) (1.8) 3.9 (99) .098 5.6 (2.5) (142) 8.0 (203) Thickness C in. (mm) .030 (.8) .043 (1.1) Head Height D in. (mm) .095 (2.4) .154 (3.9) Head Width E in. (mm) .125 (3.2) Max. Bundle Dia. in. (mm) .60 (15) .180 (4.6) .87 (22) 1.25 (32) 2.00 (51) Min. Loop Tensile Strength Lbs. (N) 8 (36) 18 (80) Recommended PANDUIT (R) Installation Tool Part No. GTS, PTS or STS2 GTS, GS2B, PTS, PPTS or STS2 Packaging* Std. Pkg. Qty. 100 Std. Ctn. Qty. 1000 Bulk Pkg. Qty. 1000 Bulk Ctn. Qty. 50000 100 1000 1000 50000 100 1000 1000 50000 100 1000 1000 25000 100 1000 1000 25000 100 1000 1000 25000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 5000 100 1000 1000 5000 100 500 1000 5000 INTERMEDIATE CROSS SECTION PLT1.5I-C0 PLT2I-C0 PLT2.5I-C0 PLT3I-C0 PLT4I-C0 5.6 (142) 8.0 (203) 9.7 (246) 11.4 (290) 14.5 (368) .142 (3.6) .045 (1.1) .240 (6.1) .180 (4.6) .145 (3.7) .052 (1.3) .280 (6.6) 1.38 (35) 2.00 (51) 2.50 (64) 3.00 (76) 4.00 (102) 40 (178) GTS, GS2B, PTS, PPTS or STS2 STANDARD CROSS SECTION PLT1S-C0 PLT1.5S-C0 PLT2S-C0 PLT2.5S-C0 PLT3S-C0 PLT4S-C0 PLT4.5S-C0 PLT5S-C0 14 4.8 (122) 6.2 (157) 7.4 (188) 9.8 (249) 11.5 (292) 14.5 (368) 15.5 (394) 17.5 (445) .316 (8.0) .190 (4.8) .052 (1.3) Most commonly used parts appear in BOLD. .220 (5.6) .337 (8.6) 1.00 (25) 1.50 (38) 1.88 (48) 2.50 (64) 3.00 (76) 4.00 (102) 4.50 (114) 5.00 (127) 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26. All part numbers shown in standard package quantities unless denoted by . Weather Resistant Cable Ties (PLT Series) PAN-TY (R) Weather Resistant Nylon Cable Ties B E A REF. C D Part Number Length Width A B in. (mm) in. (mm) Thickness C in. (mm) Head Height D in. (mm) STRAIGHT TIP Head Width E in. (mm) Max. Bundle Dia. in. (mm) .480 (12.2) 6.00 (152) 7.00 (178) 8.00 (203) 9.00 (229) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 50 500 100 2000 50 500 100 2000 50 500 100 2000 50 500 100 2000 50 500 100 1000 50 500 250 2500 50 500 250 2500 50 500 250 2500 50 500 250 2500 50 500 250 2000 50 500 100 1000 25 500 100 500 Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 25 250 100 1000 25 250 100 1000 25 250 100 1000 25 250 100 1000 25 250 100 500 25 250 100 500 LIGHT-HEAVY CROSS SECTION PLT6LH-L0 PLT7LH-L0 PLT8LH-L0 PLT9LH-L0 21.9 (556) 24.7 (627) 27.6 (701) 30.5 (775) .300 (7.6) .075 (1.9) .325 (8.3) 120 (534) GTH, GS4H, GS4EH PPTEH or STH2 HEAVY CROSS SECTION PLT2H-LO PLT2.5H-L0 PLT3H-L0 PLT4H-L0 PLT5H-L0 PLT6H-L0 PLT8H-L0 PLT13H-Q0 8.1 (206) 9.8 (251) 11.4 (290) 14.5 (368) 17.7 (450) 20.9 (530) 30.6 (779) 43.3 (1100) .300 (7.6) .075 (1.9) .350 (8.9) .290 (7.4) .078 (2.0) PAN-TY (R) Locking Weather Resistant Nylon Lashing Ties .340 (8.6) E .480 (12.2) .560 (14.2) Part Number 120 (534) GTH, GS4H, GS4EH PPTEH or STH2 175 (778) B PANDUIT A REF. C D Length Width A B in. (mm) in. (mm) 2.00 (51) 2.50 (64) 3.00 (76) 4.00 (102) 5.00 (127) 6.00 (152) 9.00 (229) 13.00 (330) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Packaging* EXTRA-HEAVY CROSS SECTION PLT2EH-Q0 PLT5EH-Q0 PLT6EH-Q0 PLT8EH-Q0 PLT10EH-Q0 PLT12EH-Q0 9.0 (229) 20.1 (511) 22.2 (564) 28.3 (719) 34.2 (869) 40.1 (1019) .075 (1.9) .500 (12.7) .400 (10.2) .085 (2.2) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26 . All part numbers shown in standard package quantities unless denoted by .800 (20.3) 2.00 (51) 5.00 (127) 6.00 (152) 8.00 (203) 10.00 (254) 12.00 (305) 250 (1112) GS4EH PPTEH or STH2 Most commonly used parts appear in BOLD. 15 Weather Resistant Cable Ties (PRT Series) The extended tab end of releasable cable ties permits easy release and reuse even after tie has been pulled up snug by hand. Releasable ties are particularly useful where changes are anticipated during development, production or servicing in the field. PAN-TY (R) Releasable Weather Resistant Nylon Lashing Ties E B PANDUIT A REF. C D Part Number Length A in. (mm) Width B in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 25 250 100 1000 25 250 100 1000 25 250 100 1000 25 250 100 1000 25 250 100 500 25 250 100 500 EXTRA-HEAVY CROSS SECTION PRT2EH-Q0 PRT5EH-Q0 PRT6EH-Q0 PRT8EH-Q0 PRT10EH-Q0 PRT12EH-Q0 9.0 (229) 20.1 (510) 22.2 (564) 28.3 (719) 34.2 (869) 40.1 (1019) .075 (1.9) .500 (12.7) .400 (10.2) .800 (20.3) .085 (2.2) Lashing Tie Mounting Clip 2.00 (51) 5.00 (127) 6.00 (152) 8.00 (203) 10.00 (254) 12.00 (305) 250 (1112) Hand Installed Only Converts PANDUIT (R) PAN -TY (R) Lashing Ties into clamps. Easily snaps in place for a secure clamp. Used with Lashing Ties (see pages 7, 8, 15 and above). B A C Dimensions in. (mm) Part Number MCEH-S25-C0 16 Height A in. (mm) .13 (3.3) Width B in. (mm) .67 (17.0) Most commonly used parts appear in BOLD. Packaging* Length C in. (mm) 1.38 (35) Material Weather Resistant Nylon 6.6 Color Black Where Used Outdoors or Indoors Mounting Method 1/4" (M6) screw (except flathead) Std. Pkg. Qty. -- Std. Ctn. Qty. -- Bulk Pkg. Qty. 100 Bulk Ctn. Qty. 1000 *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26. All part numbers shown in standard package quantities unless denoted by Weather Resistant Cable Ties (PRT Series) Releasable Cable Ties (PRT Series) The extended tab end of releasable cable ties permits easy release and reuse even after tie has been pulled up snug by hand. Releasable ties are particularly useful where changes are anticipated during development, production or servicing in the field. E B A REF. STRAIGHT TIP CURVED TIP C D Head design for Standard Cross Section Ties Head design for Heavy Cross Section Ties To release, grasp the head of the cable tie, deflect release tab and pull the cable tie away from the bundle. Part Number Cross Section Length Width Thickness A B C in. (mm) in. (mm) in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) .316 (8.0) 1.00 (25) 1.50 (38) 1.88 (48) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 1000 100 10000 100 1000 100 10000 100 1000 100 10000 100 1000 100 10000 100 1000 100 5000 50 500 250 2500 50 500 250 2500 50 500 250 2500 STANDARD CROSS SECTION PRT1S-C0 PRT1.5S-C0 PRT2S-C0 Std. PRT3S-C0 PRT4S-C0 4.8 (122) 6.3 (160) 7.4 (188) 11.5 (292) 14.5 (368) .190 (4.8) .052 (1.3) .219 (5.6) .337 (8.6) 3.00 (76) 4.00 (102) .480 (12.2) 2.00 (51) 3.00 (76) 4.00 (102) 50 (222) Hand Installed Only HEAVY CROSS SECTION PRT2H-L0 PRT3H-L0 PRT4H-L0 Hvy. 8.4 (213) 11.4 (290) 14.5 (368) .300 (7.6) .075 (1.9) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26 . All part numbers shown in standard package quantities unless denoted by .300 (7.6) 80 (356) Hand Installed Only Most commonly used parts appear in BOLD. 17 Weather Resistant Nylon 6.6 Clamp Ties (PLC Series) Clamps are used to attach a bundle to another surface such as a control panel, wall or ceiling using another fastener. The design allows for bundling before or after screwing clamp in place. PAN -TY (R) Weather Resistant Nylon Clamp Ties F B E A REF. C D Part Number Length A in. (mm) Boss Width Thickness Height B C D in. in. in. (mm) (mm) (mm) Boss Width E in. (mm) Nominal Hole Dia. F in. (mm) Screw Size Max. Bundle Dia. in. (mm) Min. Loop Recommended Std. Tensile PANDUIT (R) Installation Pkg. Strength Tool Part No. Qty. Lbs. (N) Packaging* Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. MINIATURE CROSS SECTION PLC1M-S4-C0 4.3 (110) .100 (2.5) .045 (1.2) .153 (3.9) .239 (6.1) .118 (3.0) #4 (M2.5) .75 (20) 18 (80) GTS, GS2B, PTS, PPTS or STS2 100 1000 1000 50000 .045 (1.2) .166 (4.2) .335 (8.5) .172 (4.4) #8 (M4) 1.25 (32) 40 (178) GTS, GS2B, PTS, PPTS or STS2 100 1000 1000 25000 #6 (M3) 1000 1000 10000 .160 (4.1) .145 (3.7) 100 .047 (1.2) 100 1000 1000 10000 100 1000 1000 5000 100 1000 1000 5000 INTERMEDIATE CROSS SECTION PLC1.5I-S8-C0 6.1 (156) .135 (3.4) STANDARD CROSS SECTION PLC2S-S6-C0 PLC2S-S10-C0 PLC3S-S10-C0 PLC4S-S10-C0 7.9 (201) .190 (4.8) 12.0 (305) 15.0 (381) .390 (9.5) .052 (1.3) .220 (5.6) .075 (1.9) .265 (6.7) .206 (5.2) #10 (M5) 1.84 (47) 3.00 (76) 4.00 (102) 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 HEAVY CROSS SECTION PLC2H-S25-TL0 PLC4H-S25-L0 9.0 (228) 15.1 (384) .300 (7.6) .500 (12.7) .260 (6.6) .262 (6.7) 1/4 (M6) 2.00 (51) 4.00 (102) 120 (534) GTH, GS4H, GS4EH, PPTEH or STH2 -- -- 250 2500 50 500 250 2500 NATURAL POLYPROPYLENE CABLE TIES (Refer to drawing on page 19) Part Number Length A in. (mm) Max. Min. Width Head Head Bundle Loop Recommended B Thickness Height Width Dia. Tensile PANDUIT (R) Installation in. C D E in. Strength (mm) in. (mm) in. (mm) in. (mm) (mm) Lbs. (N) Tool Part No. Packaging* Tool Setting1 (except STS2/STH2) Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. MINIATURE CROSS SECTION PLT1M-M109 3.9 (99) .098 (2.5) .043 (1.1) .154 (3.9) .180 (4.6) .87 (22) 11 (49) GTS, GS2B, PTS, PPTS or STS2 2 -- -- 1000 50000 .045 (1.2) .180 (4.6) .240 (6.1) 1.38 (35) 18 (80) GTS, GS2B, PTS, PPTS or STS2 3 -- -- 1000 25000 .316 (8.0) 1.88 (48) 3.00 (76) 4.00 (102) -- -- 1000 10000 -- -- 1000 10000 -- -- 1000 5000 -- -- 250 2500 -- -- 250 2500 -- -- 250 2500 INTERMEDIATE CROSS SECTION PLT1.5I-M109 5.6 (142) .142 (3.6) STANDARD CROSS SECTION PLT2S-M109 PLT3S-M109 PLT4S-M109 7.4 (188) 11.5 (292) 14.5 (368) .190 (4.8) .052 (1.3) .220 (5.6) .337 (8.6) 30 (133) GTS, GS2B, GTH, GS4H, 5 (GTS, GS2B, PTS, PPTS) PTS, PPTS, 2 (GTH, GS4H) STS2 or STH2 HEAVY CROSS SECTION PLT2H-TL109 PLT3H-TL109 PLT4H-TL109 8.1 (206) 11.4 (290) 14.5 (368) .300 (7.6) .075 (1.9) .290 (7.4) .480 (12.2) 2.00 (51) 3.00 (76) 4.00 (102) 50 (222) GTH, GS4H, PPTEH or STH2 5 NOTE 1: For best results, use tool tensions at the low end of the adjustment range, i.e. Std. Cable Ties installed at tool setting 5 to arrive at optimum installation tension. 18 Most commonly used parts appear in BOLD. *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 24-26. All part numbers shown in standard package quantities unless denoted by Polypropylene Cable Ties (PLT / PRT Series) PAN-TY (R) Weather Resistant Polypropylene Cable Ties For chemical resistance in outdoor applications that are unsuitable for nylon and that do not require high loop tensile strengths. Color is black. B E A REF. C D CURVED TIP Part Number Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) .043 (1.1) .154 (3.9) .180 (4.6) .87 (22) 11 (49) .045 (1.1) .180 (4.6) .240 (6.1) 1.38 (35) 18 (80) .316 (8.0) 1.88 (48) 3.00 (76) 4.00 (102) Length Width Thickness A B C in. (mm) in. (mm) in. (mm) Tool Setting 1 (except STS2/ STH2) Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. GTS, GS2B, PTS, PPTS or STS2 2 -- -- 1000 50000 GTS, GS2B, PTS, PPTS or STS2 3 -- -- 1000 25000 5 (GTS, GS2B, PTS, PPTS) 2 (GTH, GS4H) -- -- 1000 10000 -- -- 1000 10000 -- -- 1000 5000 -- -- 250 2500 -- -- 250 2500 -- -- 250 2500 Min. Loop Recommended Tensile PANDUIT (R) Strength Installation Tool Part No. Lbs. (N) Packaging* MINIATURE CROSS SECTION PLT1M-M100 3.9 (99) .098 (2.5) INTERMEDIATE CROSS SECTION PLT1.5I-M100 5.6 (142) .142 (3.6) STANDARD CROSS SECTION PLT2S-M100 PLT3S-M100 PLT4S-M100 7.4 (188) 11.5 (292) 14.5 (368) .190 (4.8) .052 (1.3) .220 (5.6) .337 (8.6) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 30 (133) HEAVY CROSS SECTION PLT2H-TL100 PLT3H-TL100 PLT4H-TL100 8.1 (206) 11.4 (290) 14.5 (368) .300 (7.6) .075 (1.9) .290 (7.4) .480 (12.2) 2.00 (51) 3.00 (76) 4.00 (102) GTH, GS4H, PPTEH or STH2 50 (222) 5 NOTE 1: For best results, use tool tensions at the low end of the adjustment range, i.e. Std. Cable Ties installed at tool setting 5 to arrive at optimum installation tension. PAN-TY (R) Releasable Polypropylene Cable Ties E B A REF. STRAIGHT TIP CURVED TIP C D Head design for Standard Cross Section Ties To release, grasp the head of the cable tie, deflect release tab and pull the cable tie away from the bundle. Part Number Length A in. (mm) Width B in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Head design for Heavy Cross Section Ties Max. Min. Loop Bundle Tensile Dia. Strength in. (mm) Lbs. (N) Recommended PANDUIT (R) Installation Tool Part. No. Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 1000 -- -- 100 1000 -- -- EXTRA-HEAVY CROSS SECTION -- WEATHER RESISTANT POLYPROPYLENE PRT5EH-C100 PRT6EH-C100 20.1 (510) 22.2 (564) .500 (12.7) .075 (1.9) .400 (10.2) *Order the number of pieces required in multiples of package quantities. All part numbers shown in standard package quantities unless denoted by .800 (20.3) 5.00 (127) 6.00 (152) 90 (400) Hand Installed Most commonly used parts appear in BOLD. 19 Flame Retardant Nylon 6.6 Cable Ties PAN -TY (R) Flame Retardant Nylon 6.6 Cable Ties and Marker Ties * Flame Retardant Nylon 6.6 meets the requirements of UL94V-0 * Can be used with flame retardant cable tie mounts (see pages 86 and 89) B E A REF. C D CURVED TIP PLM1M Part Number Length Width Thickness A B C in. (mm) in. (mm) in. (mm) Head Height D in. (mm) PLF1M PLT Head Width E in. (mm) Marker Write-on Area in. (mm) Max. Bundle Dia. in. (mm) .180 (4.6) .31 x .75 (7.9 x 19.1) .26 x .95 (6.6 x 24.1) .87 (22) .75 (20) .188 (4.8) -- .87 (22) 2.00 (51) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Packaging* Std. Pkg. Qty. Std. Ctn. Qty. -- -- 1000 25000 -- -- 1000 25000 -- -- 1000 25000 -- -- 1000 25000 -- -- 1000 25000 -- -- 1000 25000 -- -- 1000 10000 -- -- 1000 5000 -- -- 250 2500 Bulk Pkg. Qty. Bulk Ctn. Qty. MINIATURE CROSS SECTION PLF1M-M69 PLM1M-M69 PLT1M-M69 PLT2M-M69 4.3 (109) 3.9 (99) 4.0 (102) 8.0 (203) .098 (2.5) .045 (1.1) .035 (.9) .043 (1.1) .154 (3.9) 18 (80) GTS, GS2B, PTS. PPTS or STS2 INTERMEDIATE CROSS SECTION PLT1.5I-M69 PLT2I-M69 5.6 (142) 8.0 (203) .142 (3.6) .142 (3.6) .044 (1.1) .177 (4.5) .239 (6.1) -- 1.38 (35) 2.00 (51) 40 (178) GTS, GS2B, PTS, PPTS or STS2 .190 (4.8) .052 (1.3) .052 (1.3) .220 (5.6) .320 (8.1) .337 (8.6) -- 1.88 (48) 4.00 (102) 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 .300 (7.6) .075 (1.9) .290 (7.4) .480 (12.2) 4.00 (102) 120 (534) STANDARD CROSS SECTION PLT2S-M69 PLT4S-M69 7.4 (188) 14.5 (368) HEAVY CROSS SECTION PLT4H-TL69 20 14.6 (371) Most commonly used parts appear in BOLD. -- GTH, GS4H, GS4EH, PPTEH or STH2 *Order the number of pieces required in multiples of package quantities. All part numbers shown in standard package quantities unless denoted by Weather Resistant Nylon 12 Cable Ties * For high moisture, corrosive environments and low temperatures * For indoor use or weather resistant applications PAN-TY (R) Weather Resistant Nylon 12 Cable Ties B E A REF. C D CURVED TIP Part Number Length A in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. .045 (1.1) .180 (4.6) .240 (6.1) 1.38 (35) 25 (111) .052 (1.3) .220 (5.6) .316 (8.0) .337 (8.6) 1.88 (48) 4.00 (102) 40 (178) .300 (7.6) .075 (1.9) .290 (7.4) .480 (12.2) 8.00 (203) 90 (400) .300 (7.6) .075 (1.9) .290 (7.4) .480 (12.2) 4.00 (102) 90 (400) Width B in. (mm) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. GTS, GS2B, PTS, PPTS or STS2 -- -- 1000 25000 GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 -- -- 1000 10000 -- -- 1000 5000 GTH, GS4H, GS4EH, PPTEH or STH2 -- -- 100 2000 GTH, GS4H, GS4EH, PPTEH or STH2 -- -- 250 2500 INTERMEDIATE CROSS SECTION PLT1.5I-M120 5.6 (142) .142 (3.6) STANDARD CROSS SECTION PLT2S-M120 PLT4S-M120 7.4 (188) 14.5 (368) .190 (4.8) LIGHT-HEAVY CROSS SECTION PLT8LH-C120 27.6 (701) HEAVY CROSS SECTION PLT4H-TL120 14.5 (368) *Order the number of pieces required in multiples of packaging quantities. All part numbers shown in standard package quantities unless denoted by . Most commonly used parts appear in BOLD. 21 HALAR** and TEFZEL*** Cable Ties PAN-TY (R) HALAR** Fluoropolymer Cable Ties HALAR** Cable Ties are UL Listed and UL Recognized as: Suitable for use in Air Handling Spaces per NEC, Section 300-22 (c) and (d). Many inspectors look for the distinctive maroon color. HALAR** cable ties have a low smoke density rating and an excellent flammability rating of UL94V-0. Other applications include nuclear plants, chemical environments, telecommunications equipment, aerospace, high and low temperature environments. B E A REF. C D CURVED TIP Part Number Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. .043 (1.1) .186 (4.7) .188 (4.8) .87 (22) 18 (80) .055 (1.4) .059 (1.5) .240 (6.1) .320 (8.1) 1.88 (48) 3.00 (76) 50 (222) Length Width Thickness A B C in. (mm) in. (mm) in. (mm) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. GTS, GS2B, PTS, PPTS or STS2 100 1000 1000 25000 GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 100 1000 1000 10000 100 1000 1000 5000 MINIATURE CROSS SECTION PLT1M-C702 4.0 (102) .098 (2.5) STANDARD CROSS SECTION PLT2S-C702 PLT3S-C702 7.4 (188) 11.6 (295) .190 (4.8) **HALAR is a registered trademark of Solvay Solexis, Inc. PAN-TY (R) TEFZEL*** Fluoropolymer Cable Ties TEFZEL*** cable ties are ideal for applications requiring resistance to environmental stresses such as chemical attack, gamma radiation, ultraviolet radiation and extreme temperatures. In addition, TEFZEL*** has a UL Flammability rating of UL94V-0. TEFZEL*** ties have a distinctive aqua blue color. B E A REF. C D CURVED TIP Part Number Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. .043 (1.1) .186 (4.7) .188 (4.8) .87 (22) 18 (80) .045 (1.1) .180 (4.6) .240 (6.1) 2.00 (51) .320 (8.1) Length Width Thickness A B C in. (mm) in. (mm) in. (mm) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. GTS, GS2B, PTS, PPTS or STS2 100 1000 1000 25000 25 (111) GTS, GS2B, PTS, PPTS or STS2 100 1000 1000 10000 1.88 (48) 3.00 76) 4.00 (102) 100 1000 1000 10000 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 100 1000 1000 5000 100 1000 1000 5000 3.00 (78) 4.00 (102) 50 500 250 2500 120 (534) 50 500 250 2500 Bulk Ctn. Qty. MINIATURE CROSS SECTION PLT1M-C76 4.0 (102) .098 (2.5) INTERMEDIATE CROSS SECTION 8.0 .135 PLT2I-C76 (203) (3.4) STANDARD CROSS SECTION PLT2S-C76 PLT3S-C76 PLT4S-C76 7.4 (188) 11.6 (295) 14.6 (371) .055 (1.4) .190 (4.8) .055 (1.4) .240 (6.1) HEAVY CROSS SECTION 11.5 PLT3H-L76 PLT4H-L76 (292) 14.6 (371) .300 (7.6) .075 (1.9) .360 (9.1) .480 (12.2) GTH, GS4H, GS4EH PPTEH or STH2 ***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. 22 Most commonly used parts appear in BOLD. *Order the number of pieces required in multiples of package quantities. All part numbers shown in standard package quantities unless denoted by . Fluorescent Cable Ties Designed for packaging and color-coding applications. Ties are offered in four "hot" colors: Orange, Yellow, Green and Pink. PAN-TY (R) Nylon 6.6 Fluorescent Ties B E A REF. C D CURVED TIP Part Number Color Length A in. (mm) Width B in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. .098 (2.5) .043 (1.1) .154 (3.9) .180 (4.6) .87 (22) 18 (80) GTS, GTH, GS2B, PTS, PPTS or STS2 .045 (1.1) .180 (4.6) .240 (6.1) 2.00 (51) 30 (133) GTS, GTH, GS2B, PTS, PPTS or STS2 Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- -- -- 1000 1000 50000 50000 -- -- -- -- 1000 1000 50000 50000 -- -- -- -- -- -- 1000 1000 1000 25000 25000 25000 -- -- 1000 25000 -- -- -- -- -- -- -- -- 1000 1000 1000 1000 10000 10000 10000 10000 -- -- -- -- -- -- 1000 1000 1000 10000 10000 10000 -- -- 1000 10000 MINIATURE CROSS SECTION PLT1M-M53 PLT1M-M54 Orange Yellow PLT1M-M55 PLT1M-M59 Green Pink 3.9 (99) INTERMEDIATE CROSS SECTION PLT2I-M53 PLT2I-M54 PLT2I-M55 Orange Yellow Green PLT2I-M59 Pink 8.0 (203) .142 (3.6) STANDARD CROSS SECTION PLT2S-M53 Orange PLT2S-M54 PLT2S-M55 PLT2S-M59 Yellow Green Pink PLT3S-M53 PLT3S-M54 PLT3S-M55 Orange Yellow Green PLT3S-M59 Pink 7.4 (188) .316 (8.0) .190 (4.8) .052 (1.3) 1.88 (48) .220 (5.6) 11.5 (292) *Order the number of pieces required in multiples of package quantities. All part numbers shown in standard package quantities unless denoted by . 50 (222) .337 (8.6) 3.00 (76) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 Most commonly used parts appear in BOLD. 23 Part Number Suffix Codes for All PAN-TY (R) Cable Ties Part Number System (Example of PLT2S-C) PLT 2 Part Description: P = PANDUIT (R) Size: Approximate Maximum Bundle Diameter in Inches (at beginning of P/N) L = Locking T = Tie C = Clamp F = Flag M = Marker R = Releasable W = Wing P = Push Mount U = Umbrella S -- Cross Section: SM = Subminiature M = Miniature I = Intermediate S = Standard LH = Light-Heavy H = Heavy EH = Extra-Heavy Screw Hole Size: (Clamp Ties Only) -S4 = #4 (M2.5) -S6 = #6 (M3) -S8 = #8 (M4) -S10 = #10 (M5) -S25 = 1/4 (M6) C Package Size: Color: Q = 25 See Material/Color L = 50 chart. Not all ties C = 100 available in all colors. TL = 250 D = 500 M = 1000 XMR = 2 reels/5000 ea. Material/Color Chart Material/Color Nylon 6.6 -- Natural (See Note) Weather Resistant Nylon 6.6 -- Black Weather Resistant Nylon 6.6 -- Black (meets MIL Spec.) Nylon 6.6 -- Brown Nylon 6.6 -- Red Nylon 6.6 -- Orange Nylon 6.6 -- Yellow Nylon 6.6 -- Green Nylon 6.6 -- Blue Nylon 6.6 -- Purple Nylon 6.6 -- Gray Nylon 6.6 -- White Nylon 6.6 -- Telephone Gray Nylon 6.6 -- Black PANDUIT (R) Mil Spec Suffix** Suffix* 9 0 N/A 00 0 1 2 3 4 5 6 7 8 10 14 20 1 2 3 4 5 6 7 8 N/A N/A N/A Material/Color Heat Stabilized Nylon 6.6 -- Black Heat Stabilized Nylon 6.6 -- Natural Nylon 6.6 -- Fluorescent Orange Nylon 6.6 -- Fluorescent Yellow Nylon 6.6 -- Fluorescent Green Nylon 6.6 -- Fluorescent Pink Flame Retardant Nylon 6.6 -- Black Flame Retardant Nylon 6.6 -- Ivory TEFZEL*** -- Aqua Blue Weather Resistant Polypropylene -- Black Natural Polypropylene -- Green Nylon 12 -- Black Heat Stabilized Weather Resistant Nylon 6.6 -- Black HALAR**** -- Maroon PANDUIT (R) Mil Spec Suffix** Suffix* 30 N/A 39 N/A 53 N/A 54 N/A 55 N/A 59 N/A 60 N/A 69 N/A 76 N/A 100 N/A 109 N/A 120 N/A 300 N/A 702 N/A *NOTE: designates PANDUIT (R) standard Natural Nylon 6.6 color/material. No suffix required in part number. **NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368). ***TEFZEL is a registered trademark of E.I. DuPont de Nemours Co. ****HALAR is a registered trademark of Solvay Solexis, Inc. Part Number PLC1M-S4-C PLC1.5I-S8-C PLC2S-S6-C PLC2S-S10-C PLC3S-S10-C PLC4S-S10-C PLC2H-S25-L PLC4H-S25-L PLF1M-C PLF1MA-C PLF1MB-C PLM1M-C PLM2M-C PLM2S-C PLM4S-C 24 Standard Packaging Natural Nylon Available Color/ 6.6 Material (Suffix) 0 0 0 0, 14 0 0 0 0 3, 4 0 0, 4 Most commonly used parts appear in BOLD. Bulk Packaging Part Number PLC1M-S4-M PLC1.5I-S8-M PLC2S-S6-M PLC2S-S10-M PLC3S-S10-M PLC4S-S10-M PLC2H-S25-TL PLC4H-S25-TL PLF1M-M PLF1MA-M PLF1MB-M PLMIM-M PLM2M-M PLM2S-D PLM4S-D Natural Nylon 6.6 Available Color/ Material (Suffix) 0, 30 0, 30 0 0, 20, 30 0 0, 30 0, 30 0, 30 0, 2, 3, 4, 6, 10, 69 0, 2, 3, 4, 5, 6, 10 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 69 0, 4, 6 0, 2, 3, 4, 5, 6, 8 0, 2, 4, 6 Part Number Suffix Codes for All PAN-TY (R) Cable Ties Standard Packaging Natural Nylon Available Color/ 6.6 Material (Suffix) Part Number PL2M2S-L 0 PL3M2S-L PLP1.5I-C Bulk Packaging Part Number PL2M2S-D PL3M2S-D PLP1.5I-M PLP1S-M PLP1.5S-M PLP2S-M PLT.6SM-M PLT.7M-M PLT1M-M Natural Nylon 6.6 Available Color/ Material (Suffix) 0, 4, 10 0, 4 0, 30 0, 30 PLP2S-C PLT.6SM-C PLT.7M-C PLT1M-C PLT1.5M-C 0 PLT1M-XMR PLT1.5M-M PLT2M-C 0 PLT1.5M-XMR PLT2M-M PLT1.5I-C PLT1.5I-M PLT2I-C 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20, 30 0, 14, 30, 76 PLT2I-M PLT2.5I-C PLT3I-C PLT4I-C PLT1S-C PLT1.5S-C PLT2S-C 0 0, 14 0, 14 0 0 0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20, 30, 76, 702 PLT2.5I-M PLT3I-M PLT4I-M PLT1S-M PLT1.5S-M PLT2S-M PLT2.5S-C PLT3S-C 0 0, 00, 2, 20, 30, 76, 702 PLT2.5S-M PLT3S-M PLT4S-C PLT4S-M PLT4.5S-C PLT5S-C PLT6LH-L PLT7LH-L PLT8LH-L PLT8LH-Q PLT9LH-L PLT10LH-L PLT2H-L PLT2.5H-L PLT3H-L PLT4H-L 0, 00, 2, 3, 4, 5, 6, 8, 20, 30, 76 0 0 0 0 0 0 0 PLT4.5S-M PLT5S-M PLT6LH-C PLT7LH-C PLT8LH-C PLT9LH-C PLT10LH-C PLT2H-TL PLT2.5H-TL PLT3H-TL PLT4H-TL 0, 30 PLT4H-C PLT5H-L PLT6H-L PLT8H-Q PLT8H-L PLT13H-Q PLT2EH-Q PLT5H-C PLT6H-C PLT8H-C 0, 30 0, 30 0, 00, 30 PLT13H-C PLT2EH-C 0, 3 0 0 0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14, 30, 76, 702 0 0 0, 76 0, 00, 76 0 0 0 0 0 0 0 0, 30 0, 30 0, 30 0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14, 20, 30, 53, 54, 55, 59, 60, 69, 76, 100, 109, 300, 702 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 30 0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14, 20, 30 0, 00, 30 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20, 30, 69 0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20, 30, 69, 100, 109, 120, 300 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14, 20, 30, 53, 54, 55, 59, 69, 76, 300 0, 20 0, 2, 3, 4, 5, 6, 8, 10, 14, 20, 30 0, 2, 5, 6, 14, 20, 30 0, 30, 38, 300 0, 30 0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20, 30, 38, 39, 53, 54, 55, 59, 60, 69, 76, 100, 109, 120, 300, 702 0, 30 0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20, 30, 53, 54, 55, 59, 76, 100, 109, 702 0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14, 20, 30, 69, 76, 100, 109, 120, 300 0 0, 2, 3, 4, 5, 6, 8, 30 0 0, 30 0, 120 0, 2, 4, 6, 30, 100, 109, 300 0 0, 30, 76, 100, 109 0, 00, 1, 2, 3, 4, 5, 6, 10, 20, 30, 69, 76, 100, 109, 120, 300 Most commonly used parts appear in BOLD. 25 Part Number Suffix Codes for All PAN-TY (R) Cable Ties Part Number Standard Packaging Natural Nylon Available Color/ 6.6 Material (Suffix) PLT5EH-Q 0 PLT6EH-Q 0 PLT8EH-Q PLT10EH-Q PLT12EH-Q PLWP1M-C PLWP1.5I-C PLWP1S-C PLWP2S-C PRT1S-C PRT1.5S-C PRT2S-C PRT3S-C PRT4S-C PRT2H-L PRT3H-L PRT4H-L PRT2EH-Q PRT5EH-Q PRT6EH-Q PRT8EH-Q PRT10EH-Q PRT12EH-Q PRWP1S-C 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Most commonly used parts appear in BOLD. Bulk Packaging Part Number PLT3EH-NB-C PLT5EH-C PLT5EH-NB-C PLT6EH-C PLT6EH-NB-C PLT8EH-C PLT10EH-C PLT12EH-C PLUP40S-D PLUP40SE-D PLWP1M-D PLWP1.5I-D PLWP1S-D PLWP1SA-D PLWP1SB-D PLWP1.5S-D PLWP1.5SA-D PLWP2S-D PLWP2SA-D PLWP2SB-D PLWP2H-TL PLWP3H-TL PLWP30SC-D PLWP40SC-D PLWP40SD-D PLWP50SC-D PLWP50SE-D PRLWP30S-D PRLWP50S-D PRT1S-M PRT1.5S-M PRT2S-M PRT3S-M PRT4S-M PRT2H-TL PRT3H-TL PRT4H-TL PRT2EH-C PRT5EH-C PRT6EH-C PRT8EH-C PRT10EH-C PRT12EH-C PRWP1S-D PRWP1SA-D PRWP1SB-D PRWP1.5S-D PRWP2S-D PRWP2H-TL PRST30S-S14-M Natural Nylon 6.6 Available Color/ Material (Suffix) 0 0 0 0 0 0 0 0 30 30 0, 30 30 0, 20, 30 30 0, 30 0, 30 0 30 30 30 30 30 30 30 0 0, 30 0, 2, 3, 4, 6, 7 0 0, 2, 3, 4, 6 0 0 0 0, 100 0, 100 0, 100 0, 100 0 0 0 0, 20, 30 0 30 DOME-TOP (R) Barb Ty Cable Ties DOME-TOP (R) Barb Ty Cable Tie Features/Benefits 1. DOME -TOP (R) Head 2. Stainless Steel Barb 3. Low Threading Force * Unique patented design * Round smooth edges * No irritation to installer's hands * Made of 316 corrosion resistant stainless steel * Provides consistent performance and reliability for users who prefer a cable tie with a metal barb * Infinitely adjustable for tight bundles through its entire bundle range * Reduces installer fatigue * Increases productivity 4. High Tensile Strength 5. Anti-Slip Strap Body 6. Finger Tip Grip * Exceeds industry and Aerospace Standard SAE (AS23190) standards * Available in four loop tensile strengths from 18 lbs. (80N) to 120 lbs. (534N) to provide a wide selection * Ribbed and stippled strap body prevents axial and lateral movement * Exclusively designed finger grip is available on all sizes of DOM E-TOP (R) Barb Ty Cable Ties to assure positive grip during threading of the tie 7. Curved Tip 8. Material/Size Availability * Orients tip toward head to speed installation; lowers installed cost * Faster initial threading * Easier to pick up from flat surfaces * Available in lengths from 4.0" (102mm) to 30.7" (780mm) to meet a variety of applications * Several materials available for special environments: Natural 6.6 nylon, weather resistant black 6.6 nylon, heat stabilized 6.6 nylon and 11 different colors Most commonly used parts appear in BOLD. 27 DOME-TOP (R) Barb Ty Cable Ties (BT Series) * Available in Miniature, Intermediate, Standard and Light-Heavy cross sections * Bundle diameters up to 9.00" (229mm) * Available in natural, weather resistant and heat stabilized nylon and 11 different colors * Tool or hand installed DOME-TOP (R) Barb Ty Nylon 6.6 Locking Cable Ties B E A REF. STRAIGHT TIP C D CURVED TIP Side View Front View PartNumber Length Width A B in. (mm) in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) .172 (4.4) .90 (23) .182 (4.6) 1.50 (38) 2.00 (51) 4.00 (102) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Packaging* Std. Pkg. Qty.* Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 1000 1000 50000 100 1000 1000 25000 100 1000 1000 25000 100 1000 1000 10000 100 1000 1000 25000 100 1000 1000 25000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 50 500 250 2500 50 500 250 2500 50 500 250 2500 50 500 100 2000 50 500 100 2000 50 500 100 2000 50 500 100 1000 50 500 100 1000 MINIATURE CROSS SECTION BT1M-C BT1.5M-C BT2M-C BT4M-C 4.0 (102) 6.3 (160) 7.9 (201) 14.2 (361) .036 (0.9) .095 (2.4) .046 (1.2) .156 (4.0) GTS, GS2B, PTS, PPTS or STS2 18 (80) INTERMEDIATE CROSS SECTION BT1.5I-C BT2I-C BT3I-C BT4I-C 6.1 (155) 8.0 (203) 11.3 (287) 14.3 (363) .041 (1.0) .141 (3.6) .185 (4.7) .248 (6.3) .049 (1.2) 1.50 (38) 2.00 (51) 3.00 (76) 4.00 (102) 40 (178) GTS, GS2B, PTS, PPTS or STS2 STANDARD CROSS SECTION BT2S-C BT3S-C BT4S-C 8.0 (203) 12.0 (305) 15.1 (384) .045 (1.2) .185 (4.7) .052 (1.3) .220 (5.6) .320 (8.1) 2.00 (51) 3.00 (76) 4.00 (102) 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP) BT2LH-L BT3LH-L BT4LH-L BT5LH-L BT6LH-L BT7LH-L BT8LH-L BT9LH-L 28 8.7 (221) 11.8 (300) 14.9 (378) 18.1 (460) 21.2 (538) 24.4 (620) 27.5 (699) 30.7 (780) .275 (7.0) .065 (1.7) Most commonly used parts appear in BOLD. .320 (8.1) .520 (13.2) 2.00 (51) 3.00 (76) 4.00 (102) 5.00 (127) 6.00 (152) 7.00 (178) 8.00 (203) 9.00 (229) 120 (534) GTH, GS4H, GS4EH, PPTEH, STH2 or ST2EH *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 34-35. All part numbers shown in standard package quantities unless denoted by . Weather Resistant DOME-TOP (R) Barb Ty Cable Ties (BT Series) * Available in Miniature, Intermediate, Standard and Light-Heavy cross sections * Bundle diameters up to 9.00" (229mm) * Weather resistant nylon has greater resistance to ultraviolet light which damages natural nylon * Tool or hand installed DOME-TOP (R) Barb Ty Weather Resistant Nylon 6.6 Locking Cable Ties B E A REF. Except LH -0 Ties STRAIGHT TIP C D CURVED TIP Side View Part Number Front View Length A in. (mm) Width B in. (mm) Thickness C in. (mm) Except LH -0 Ties Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) .172 (4.4) .90 (23) 1.50 (38) 2.00 (51) 4.00 (102) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 1000 1000 50000 100 1000 1000 25000 100 1000 1000 25000 100 1000 1000 10000 100 1000 1000 25000 100 1000 1000 25000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 5000 50 500 250 2500 50 500 250 2500 50 500 250 2500 50 500 100 2000 50 500 100 2000 50 500 100 2000 50 500 100 1000 50 500 100 1000 MINIATURE CROSS SECTION BT1M-C0 BT1.5M-C0 BT2M-C0 BT4M-C0 4.0 (102) 6.3 (160) 7.9 (201) 14.2 (361) .036 (0.9) .095 (2.4) .046 (1.2) .156 (4.0) .182 (4.6) 18 (80) GTS, GS2B, PTS, PPTS or STS2 INTERMEDIATE CROSS SECTION BT1.5I-C0 BT2I-C0 BT3I-C0 BT4I-C0 6.1 (155) 8.0 (203) 11.3 (287) 14.3 (363) .041 (1.0) .141 (3.6) .185 (4.7) .248 (6.3) .049 (1.2) 1.50 (38) 2.00 (51) 3.00 (76) 4.00 (102) 40 (178) GTS, GS2B, PTS, PPTS or STS2 STANDARD CROSS SECTION BT2S-C0 BT3S-C0 BT4S-C0 8.0 (203) 12.0 (305) 15.1 (384) .045 (1.2) .185 (4.7) .052 (1.3) .220 (5.6) .320 (8.1) 2.00 (51) 3.00 (76) 4.00 (102) 50 (222) GTS, GS2B GTH, GS4H, PTS, PPTS, STS2 or STH2 LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP) BT2LH-L0 BT3LH-L0 BT4LH-L0 BT5LH-L0 BT6LH-L0 BT7LH-L0 BT8LH-L0 BT9LH-L0 8.7 (221) 11.8 (300) 14.9 (378) 18.1 (460) 21.2 (538) 24.4 (620) .275 (7.0) .065 (1.7) .320 (8.1) 27.5 (699) 30.7 (780) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 34-35. All part numbers shown in standard package quantities unless denoted by .520 (13.2) 2.00 (51) 3.00 (76) 4.00 (102) 5.00 (127) 6.00 (152) 7.00 (178) 8.00 (203) 9.00 (229) 120 (534) GTH, GS4H, GS4EH, PPTEH, STH2, or ST2EH Most commonly used parts appear in BOLD. 29 DOME-TOP (R) Barb Ty Heat Stabilized Cable Ties (BT Series) * Available in Miniature, Intermediate, Standard and Light-Heavy cross sections * Bundle diameters up to 4.00" (102mm) * Temperature rating: -40F (-40C) to 239F (115C) DOME-TOP (R) Barb Ty Heat Stabilized Nylon 6.6 -- Natural Color B E A REF. STRAIGHT TIP C D CURVED TIP Front View Side View Part Number Length A in. (mm) Width B in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. .036 (0.9) .156 (4.0) .172 (4.4) .90 (23) 18 (80) .041 (1.0) .185 (4.7) .248 (6.3) 1.50 (38) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. GTS, GS2B, PTS, PPTS or STS2 -- -- 1000 50000 40 (178) GTS, GS2B, PTS, PPTS or STS2 -- -- 1000 25000 -- -- 1000 10000 50 (222) GTS, GS2B GTH, GS4H, PTS, PPTS, STS2 or STH2 -- -- 1000 10000 -- -- 1000 5000 -- -- 250 2500 MINIATURE CROSS SECTION BT1M-M39 4.0 (102) .095 (2.4) INTERMEDIATE CROSS SECTION BT1.5I-M39 6.1 (155) .141 (3.6) STANDARD CROSS SECTION BT2S-M39 BT3S-M39 BT4S-M39 .045 (1.2) 8.0 (203) 12.0 (305) 15.1 (384) .185 (4.7) .052 (1.3) 2.00 (51) .220 (5.6) .320 (8.1) 3.00 (76) 4.00 (102) LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP) BT4LH-TL39 14.9 (378) .275 (7.0) .065 (1.7) .320 (8.1) .520 (13.2) 4.00 (102) 120 (534) GTH,GS4H, GS4EH, PPTEH, STH2 or ST2EH Push mount ties are used to attach a cable bundle to a surface such as a flat panel. The anchor is easily pressed into a pre-drilled hole and locks in place. The wings provide constant tension when installed, creating a stable, secure fixture and rattle-free installation. DOME-TOP (R) Barb Ty Nylon 6.6 Winged Push Mount Ties B A REF. D C Part Number Length A in. (mm) Width B in. (mm) Head Height D in. (mm) Nominal Hole Dia. in. (mm) Max. Panel Thickness in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. .041 (1.0) .280 (7.1) .187 (4.7) .093 (2.4) 1.50 (38) 40 (178) .052 (1.3) .370 (9.4) .250 (6.4) .156 (4.0) 2.00 (51) 50 (222) Thickness C in. (mm) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. GTS, GS2B, PTS, PPTS or STS2 -- -- 500 5000 GTS, GS2B GTH, GS4H, PTS, PPTS, STS2 or STH2 -- -- 500 5000 INTERMEDIATE CROSS SECTION BW1.5I-D 6.6 (168) .141 (3.6) STANDARD CROSS SECTION BW2S-D 30 8.5 (216) .185 (4.7) Most commonly used parts appear in BOLD. *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 34-35. All part numbers shown in standard package quantities unless denoted by DOME-TOP (R) Barb Ty Clamp Ties DOME-TOP (R) Barb Ty Nylon 6.6 Clamp Ties * Used to secure a bundle to another surface * The design allows for bundling before or after screwing clamp in place * Available in Miniature, Intermediate, Standard and Light-Heavy cross sections * Bundle diameters up to 4.00" (102mm) * Available in natural, weather resistant and heat stabilized black nylon F B E A REF. Side View Part Number STRAIGHT TIP C D CURVED TIP Front View Nominal Length Width Boss Boss Hole Max. Min. Loop Recommended A B Thickness Height Width Dia. Screw Bundle Tensile PANDUIT (R) in. in. C D E F Size Dia. Strength Installation Tool Part No. (mm) (mm) in. (mm) in. (mm) in. (mm) in.(mm) (Metric) in. (mm) Lbs. (N) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. 100 1000 1000 50000 100 1000 1000 25000 100 1000 1000 25000 100 1000 500 10000 -- -- 500 10000 100 1000 500 5000 50 500 250 2500 Bulk Ctn. Qty. MINIATURE CROSS SECTION BC1MS4-M BC2M-S4-M 4.6 (117) 8.3 (211) .095 (2.4) .095 (2.4) .046 (1.2) .046 (1.2) .156 (4.0) .156 (4.0) .234 (5.9) .234 (5.9) .124 (3.15) .124 (3.15) #4 (M2.5) #4 (M2.5) .90 (23) 2.0 (51) 18 (80) GTS, GS2B, PTS, PPTS or STS2 .041 (1.0) .166 (4.2) .330 (8.4) .180 (4.57) #8 (M4) 1.5 (38) 40 (178) GTS, GS2B, PTS, PPTS or STS2 #10 (M5) 2.00 (51) 3.00 (76) 4.00 (102) 50 (222) 4.00 (102) 120 (534) INTERMEDIATE CROSS SECTION BC1.5I-S8-M 6.6 (168) .141 (3.6) STANDARD CROSS SECTION BC2S-S10-C BC3S-S10-D BC4S-S10-C 8.5 (216) 12.5 (318) 15.6 (396) .185 (4.7) .052 (1.3) .160 (4.1) .400 (10.2) .206 (5.2) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP) BC4LH-S25-L 15.5 (394) .275 (7.0) .065 (1.7) .265 (6.7) .520 (13.2) .260 (6.6) 1/4 (M6) GTH, GS4H, GS4EH, PPTEH, STH2 or ST2EH DOME-TOP (R) Barb Ty Weather Resistant Nylon Clamp Ties Except Light Heavy Part Number Nominal Min. Length Width Boss Boss Hole Max. Loop A B Thickness Height Width Dia. Screw Bundle Tensile in. in. C D E F Size Dia. Strength (mm) (mm) in. (mm) in. (mm) in. (mm) in. (mm) (Metric) in. (mm) Lbs. (N) Packaging* Recommended PANDUIT (R) Installation Tool Part No. Std. Pkg. Qty. Std. Ctn. Qty. Bulk Bulk Pkg. Ctn. Qty. Qty. 100 500 1000 10000 -- -- 1000 10000 100 500 1000 5000 50 500 250 STANDARD CROSS SECTION BC2S-S10-C0 BC3S-S10-D0 BC4S-S10-C0 8.5 (216) 12.5 (318) 15.6 (396) .185 (4.7) .052 (1.3) .160 (4.1) .400 (10.2) .206 (5.2) #10 (M5) 2.00 (51) 3.00 (76) 4.00 (102) 50 (222) 4.00 (102) 120 (534) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 LIGHT-HEAVY CROSS SECTION BC4LH-S25-L0 15.5 (394) .275 (7.0) .065 (1.7) .265 (6.7) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 34-35. All part numbers shown in standard package quantities unless denoted by . .520 (13.2) .260 (6.6) 1/4 (M6) GTH, GS4H, GS4EH, PPTEH, STH2 or ST2EH Most commonly used parts appear in BOLD. 2500 31 DOME-TOP (R) Barb Ty Marker and Flag Ties (BM/BF Series) * Used to fasten and identify bundles at the same time * They can be marked with PANDUIT (R) Marker Pens, Custom Hot Stamping Service on page 52 or Computer Printable Labels * Available in Miniature and Standard Cross Section * Bundle diameters up to 4.00" (102mm) * Available in natural and weather resistant nylon DOME-TOP (R) Barb Ty Nylon 6.6 Marker and Flag Ties Part Number Length Width Thickness A B C in. (mm) in. (mm) in. (mm) BM1M BM2M Max. Bundle Dia. in. (mm) Head Height D in. (mm) Head Width E in. (mm) Marker Write-on Area in. (mm) .156 (4.0) .182 (4.6) .29 x 1.09 (7.4) x (27.7) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. 18 (80) GTS, GS2B PTS, PPTS or STS2 Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. 18 (80) GTS, GS2B, PTS, PPTS or STS2 Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. 50 (222) GTS, GS2B GTH, GS4H, PTS, PPTS or STH2 Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. 100 1000 1000 25000 100 1000 1000 25000 Std. Pkg. Qty.* Std. Ctn. Qty. Bulk Pkg. Qty. 100 1000 1000 25000 100 1000 1000 25000 Bulk Ctn. Qty. MINIATURE CROSS SECTION BM1M-C BM2M-C Part Number 4.2 (107) 7.9 (201) .095 (2.4) Length Width A B in. (mm) in. (mm) .046 (1.2) .90 (23) 2.00 (51) BF1M BF2M Max. Bundle Dia. in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Marker Write-on Area in. (mm) .046 (1.2) .156 (4.0) .182 (4.6) .36 x .81 (9.1) x (20.6) Packaging* Bulk Ctn. Qty. MINIATURE CROSS SECTION BF1M-C BF2M-C 4.6 (117) 8.3 (211) .095 (2.4) BM2S Part Number Length Width A B in. (mm) in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) .220 (5.6) .320 (8.1) .90 (23) 2.00 (51) BM4S Marker Write-on Area in. (mm) Max. Bundle Dia. in. (mm) .49 x .91 (12.4) x (23.1) 2.00 (51) .50 x 2.13 (12.7) x (54.1) 4.00 (102) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 1000 500 10000 100 1000 500 10000 STANDARD CROSS SECTION BM2S-C BM4S-C 32 8.0 (203) 15.1 (384) .185 (4.7) .045 (1.2) .052 (1.3) Most commonly used parts appear in BOLD. *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 34-35. All part numbers shown in standard package quantities unless denoted by DOME-TOP (R) Barb Ty Marker Ties/DURA -TY TM Cable Ties DOME-TOP (R) Barb Ty Nylon 6.6 Marker Ties (con't) B2M2S E E B B A A B3M2S Length A in. (mm) Part Number Width B in. (mm) B4M2S Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Marker Write-On Area in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 Packaging* Std. Pkg. Qty.* Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 50 500 500 2500 50 500 250 2500 50 500 250 2500 STANDARD CROSS SECTION B2M2S-D 11.5 x .91 (29.2) x (23.1) B3M2S-TL 8.0 (203) .185 (4.7) .045 (1.2) .220 (5.6) .320 (8.1) B4M2S-TL 1.81 x .91 (46.0) x (23.1) 2.00 (51) 2.47 x .91 (62.7) x (23.1) * Ideal for all outdoor messenger strand applications including telephone, cable TV, traffic signals and outside plant power services * Weather Resistant Acetal strap body and head * Double stainless steel Type 302 locking barbs * High tensile strength and high impact resistance * Excellent chemical and moisture resistance * 250 lbs. Minimum loop tensile strength * Meets Telcordia TR-TSY-000789 * May be used with Stackable Cable Spacers SACS50-T100 (see page 107) DURA-TY TM Weather Resistant Cable Ties A C D E Part Number Description Length (A) in. (mm) B Strap Head Width Thickness Height (B) (C) in. in. (mm) in. (mm) (mm) Head Width in. (mm) .490 (12.4) .718 (18.2) Max Min. Loop Recommended Bundle Tensile PANDUIT (R) Dia. Strength Installation Tool Part No. in. (mm) N (Lbs.) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 50 1000 -- -- 25 500 -- -- 1 20 -- -- EXTRA-HEAVY CROSS SECTION DT4EH-L0 DT8EH-Q0 Cable Tie 13.5 (343) 27.0 (686) DTREH-LR0 50' Reel of Strapping 600.0 (15,240) DTHEH-Q0 Bag of 25 Cable Tie Heads -- DURA -TY TM Kit 50 ft. Reel of Strapping 600.0 (15,240) DTKEH-0 .500 (12.7) -- .500 (12.7) .059 (1.5) -- -- .490 (12.4) .718 (18.2) -- .059 (1.5) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see pages 34-35. All part numbers shown in standard package quantities unless denoted by 3.87 (98) 8.00 (203) 250 (1112) GTH, GS4H, ST2EH or GS4EH As Needed -- -- 25 500 -- -- As Needed 250 (1112) 1 20 -- -- Most commonly used parts appear in BOLD. 33 TM Part Number Suffix Codes for all DOME-TOP (R) Barb Ty and DURA-TY Cable Ties Part Number System (Example of BT1M-C) BT 1 M Part Description: BT = Barb Ty BC = Barb Clamp BF = Barb Flag BM = Barb Marker BW = Barb Wing DT = DU RA-TY TM Size: Approximate Maximum Bundle Diameter in Inches Cross Section: M = Miniature I = Intermediate S = Standard LH = Light-Heavy EH = Extra-Heavy -- Screw Hole Size: (Clamp Ties Only) -S4 = #4 (M2.5) -S6 = #6 (M3) -S8 = #8 (M4) -S10 = #10 (M5) -S25 = 1/4 (M6) C Package Size: Q = 25 L = 50 C = 100 TL = 250 D = 500 M = 1000 LR = 50' Reel 0 = DT Kit Color: See Material/Color chart. Not all ties available in all colors. Material/Color Chart Material/Color Nylon 6.6 -- Natural (See Note) Weather Resistant Nylon 6.6 -- Black Nylon 6.6 -- Brown Nylon 6.6 -- Red Nylon 6.6 -- Orange Nylon 6.6 -- Yellow Nylon 6.6 -- Green PANDUIT (R) Mil Spec Suffix** Suffix* 9 0 N/A 1 2 3 4 5 1 2 3 4 5 Material/Color Nylon 6.6 -- Blue Nylon 6.6 -- Purple Nylon 6.6 -- Gray Nylon 6.6 -- White Nylon 6.6 -- Telephone Gray Nylon 6.6 -- Black Heat Stabilized Nylon 6.6 -- Black Heat Stabilized Nylon 6.6 -- Natural PANDUIT (R) Mil Spec Suffix** Suffix* 6 6 7 7 8 8 10 N/A 14 N/A 20 N/A 30 N/A 39 N/A * NOTE: designates PANDUIT (R) standard Natural Nylon 6.6 color/material. No suffix required in part number. ** NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368). Part Number Standard Packaging Natural Nylon Available Color/ 6.6 Material (Suffix) BC2S-S10-C 0 BC4S-S10-C BC4LH-S25-L BF1M-C BF2M-C BM1M-C BM2M-C BM2S-C BM4S-C BT1M-C BT1.5M-C BT2M-C BT4M-C BT1.5I-C BT2I-C BT3I-C BT4I-C 0 0 34 0, 30 0 0 0 0 0 0 0 Most commonly used parts appear in BOLD. Bulk Packaging Part Number BC1M-S4-M BC2M-S4-M BC1.5I-S8-M BC2S-S10-D BC3S-S10-D BC4S-S10-D BC4LH-S25-TL BF1M-M BF2M-M BM1M-M BM2M-M BM2S-D BM4S-D BT1M-M BT1.5M-M BT2M-M BT4M-M BT1.5I-M BT2I-M BT3I-M BT4I-M Natural Nylon 6.6 Available Color/ Material (Suffix) 0 0 0 0 0 0, 30 0 0 0 0 0 0 0 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 30, 39 0, 30 0, 2, 3, 4, 5, 6, 8, 30 0 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 30, 39 0, 30 0, 30 0, 14 Part Number Suffix Codes for all DOME-TOP (R) Barb Ty and DURA-TY TM Cable Ties Standard Packaging Part Number BT2S-C BT3S-C BT4S-C BT2LH-L BT3LH-L BT4LH-L BT5LH-L BT6LH-L BT7LH-L BT8LH-L BT9LH-L 1 DTHEH-Q DTKEH 1 DTREH-LR 1 DT4EH-L 1 DT8EH-Q 1 Natural Nylon 6.6 0 Available Color/ Material (Suffix) 0, 2 0 0 0 0 0 0 0 0 0 Bulk Packaging Part Number BT2S-M BT3S-M BT4S-M BT2LH-TL BT3LH-TL BT4LH-TL BT5LH-C BT6LH-C BT7LH-C BT8LH-C BT9LH-C BW1.5I-D BW2S-D B2M2S-D B3M2S-TL B4M2S-TL Natural Available Color/ Nylon 6.6 Material (Suffix) 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20, 30, 39 0, 30, 39 0, 2, 3, 4, 5, 6, 7, 8, 10, 30, 39 0 0 0, 30, 39 0 0 0 0 0 0 0 0 0 0 0 0 0 0 NOTE 1: DURA-TY TM Weather Resistant Acetal Strap Body and Head. Most commonly used parts appear in BOLD. 35 CONTOUR-TY (R) Cable Ties * Head designed for no protrusion of cut-off tie * Tie configuration limits exposure to sharp edges to protect adjacent cables and installers arms and hands * Low profile head reduces overall bundle size * Locking wedge is fully enclosed to insure consistent strength and lasting performance * Fully rounded edges on head and strap protect cable insulation/jacket * Rounded tip and aggressive grip for faster initial threading CONTOUR-TY (R) Cable Ties Nylon 6.6 and Weather Resistant Nylon 6.6 B E A C D Part Number Length A in. (mm) Width B in. (mm) Thickness C in. (mm) Head Height D in. (mm) Max. Min. Head Bundle Loop Width Dia. Tensile E in. Strength in. (mm) (mm) Lbs. (N) Packaging* Recommended PANDUIT (R) Installation Tool Part No. Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 1000 50000 -- -- 1000 50000 2.00 (51) -- -- 1000 25000 1.50 (38) -- -- 1000 25000 -- -- 1000 10000 4.00 (102) -- -- 1000 10000 2.00 (51) -- -- 1000 10000 -- -- 1000 5000 -- -- 1000 5000 -- -- 500 5000 -- -- 250 2500 -- -- 100 2000 MINIATURE CROSS SECTION CBR1M-M CBR1M-M0 CBR1.5M-M CBR1.5M-M0 CBR2M-M CBR2M-M0 4.1 (104) 5.6 (142) .038 (1.0) .098 (2.5) 7.2 (183) .042 (1.1) .195 (5.0) .208 (5.3) .209 (5.3) 1.00 (25) 1.50 (38) 18 (80) GTS, GS2B, PTS or PPTS INTERMEDIATE CROSS SECTION CBR1.5I-M CBR1.5I-M0 CBR3I-M CBR3I-M0 CBR4I-M CBR4I-M0 5.9 (150) 10.4 (264) .040 (1.0) .140 (3.6) 13.6 (345) .052 (1.3) .250 (6.4) .250 (6.4) .262 (6.7) 3.00 (76) 40 (178) GTS, GS2B, PTS or PPTS STANDARD CROSS SECTION CBR2S-M CBR2S-M0 CBR3S-M CBR3S-M0 CBR4S-M CBR4S-M0 7.6 (193) 10.8 (274) .044 (1.1) .190 (4.8) 14.0 (356) .052 (1.3) .290 (7.1) .332 (8.4) 3.00 (76) 50 (222) GTS, GS2B, PTS or PPTS 4.00 (102) HEAVY-STANDARD CROSS SECTION CBR2HS-D CBR2HS-D0 8.0 (203) .250 (6.4) .058 (1.4) .326 (8.2) .388 (9.9) .300 (7.6) .070 (1.8) .400 (10.2) .490 (12.4) 2.00 (51) 85 (378) GTH or GS4H 120 (534) GTH, GS4H or PPTEH LIGHT-HEAVY CROSS SECTION CBR4LH-TL CBR4LH-TL0 CBR6LH-C CBR6LH-C0 36 14.6 (371) 20.9 (531) Most commonly used parts appear in BOLD. 4.00 (102) 6.00 (152) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see page 39. All part numbers shown in standard package quantities unless denoted by . BELT-TY TM In-Line Cable Ties BELT-TY TM In-Line Cable Ties Nylon 6.6 * Protects adjacent cables and protects workers arms and hands * Avoids snags and reduces overall bundle size * No sharp edges in contact with cable insulation * Easy to grip for assembly * Positive grip when threading tie * Material: Nylon 6.6 * Head designed for no protrusion of cut-off tie * Low profile head (35% lower than conventional 90 entry cable ties) * Fully rounded edges on head and strap * Rounded tip and aggressive grip * Finger grip shaped head * Curved tip B E A C D * Parallel-entry cable ties that thread like a belt (at 180) with the same performance of conventional (90 entry) cable ties * The BELT -TY TM In-Line Cable Tie design reduces the long cut-off danger of an incorrectly applied conventional cable tie Part Number Length A in. (mm) Width B in. (mm) Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. .044 (1.1) .110 (2.8) .190 (4.8) 1.10 (28) 18 (80) .052 (1.3) .130 (3.3) .260 (6.6) 1.38 (35) 30 (133) .316 (8.0) 1.88 (48) 3.00 (76) 4.00 (102) 50 (222) 4.00 (102) 6.00 (152) 120 (534) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. GTS, GS2B, PTS or PPTS -- -- 1000 50,000 GTS, GS2B, PTS or PPTS -- -- 1000 25,000 -- -- 1000 10,000 -- -- 1000 5000 -- -- 1000 5000 -- -- 250 2500 -- -- 100 500 MINIATURE CROSS SECTION ILT1M-M 4.8 (122) .098 (2.5) INTERMEDIATE CROSS SECTION ILT1.5I-M 5.4 (137) .142 (3.6) STANDARD CROSS SECTION ILT2S-M ILT3S-M ILT4S-M 8.3 (211) 11.5 (292) 14.7 (373) .190 (4.8) .052 (1.3) .140 (3.6) GTS, GS2B, GTH, GS4H, PTS or PPTS LIGHT-HEAVY CROSS SECTION ILT4LH-TL ILT6LH-C . 14.8 (376) 21.2 (538) .300 (7.6) .075 (1.9) .250 (6.4) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see page 39. All part numbers shown in standard package quantities unless denoted by . .475 (12.1) GTH, GS4H or PPTEH Most commonly used parts appear in BOLD. 37 IN-LINE Nylon 6.6 Cable Ties IN-LINE Weather Resistant Nylon 6.6 Cable Ties * Wide tie body and high tensile strength are ideal for any application including playground equipment * For playground installations, the head is inverted and the body is captured between the tie and foam for safety * Flexible, easy to handle and easily installed without special tools * Available in 13 UV weather resistant colors for color coordination and UV stability B Colors can be used to install foam padding for playground applications. UV Black can be used in any outdoor application. E A REF. C D Part Number Description Length Width Thickness A B C in. (mm) in. (mm) in. (mm) Head Height D in. (mm) Head Width E in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty.* Bulk Ctn. Qty.* Cable Tie Colors IT9100-CUV2 UV Red -- -- 100 1000 IT9100-CUV4 UV Yellow -- -- 100 1000 IT9100-CUV4A UV Butterscotch -- -- 100 1000 IT9100-CUV5A UV Green -- -- 100 1000 IT9100-CUV5B UV Hunter Green -- -- 100 1000 IT9100-CUV6 UV Dark Blue -- -- 100 1000 IT9100-CUV6A UV Light Blue -- -- 100 1000 IT9100-CUV6B UV Cobalt Blue -- -- 100 1000 IT9100-CUV7A UV Purple -- -- 100 1000 IT9100-CUV8 UV Silver -- -- 100 1000 IT9100-CUV11 UV Teal -- -- 100 1000 IT9100-CUV16B UV Pink -- -- 100 1000 IT9115-CUV2 UV Red -- -- 100 1000 IT9115-CUV4 UV Yellow -- -- 100 1000 IT9115-CUV4A UV Butterscotch -- -- 100 1000 IT9115-CUV5A UV Green -- -- 100 1000 IT9115-CUV5B UV Hunter Green -- -- 100 1000 IT9115-CUV6 UV Dark Blue -- -- 100 1000 IT9115-CUV6A UV Light Blue -- -- 100 1000 IT9115-CUV6B UV Cobalt Blue -- -- 100 1000 IT9115-CUV7A UV Purple -- -- 100 1000 IT9115-CUV8 UV Silver -- -- 100 1000 IT9115-CUV11 UV Teal -- -- 100 1000 IT9115-CUV16B UV Pink -- -- 100 1000 1.57 (40) -- -- 100 1000 2.58 (65) -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 5.91 (150) -- -- 100 1000 9.84 (250) -- -- 100 1000 14.1 (358) 15.3 (389) .350 (8.9) .350 (8.9) .065 (1.7) .065 (1.7) .300 (7.6) .300 (7.6) .556 (14.1) .556 (14.1) 3.94 (100) 4.53 (115) 124 (550) 124 (550) Black Cable Ties IT940-C0 UV Black 6.8 (173) IT965-C0 UV Black 10.1 (257) IT9100-C0 UV Black 14.1 (358) IT9115-C0 UV Black 15.3 (388) IT9150-C0 UV Black 20.1 (511) IT9250-C0 38 UV Black 33.0 (838) Most commonly used parts appear in BOLD. .065 (1.7) .300 (7.6) .350 (8.9) .556 (14.1) .075 (1.9) .320 (8.1) 3.94 (100) 4.53 (115) 124 (550) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see page 39. All part numbers shown in standard package quantities unless denoted by . Part Number Suffix Code for All Parallel Entry Cable Ties Part Number System (Example of ILT1M-M) ILT 1 Part Description: CBR = CON TOU R-TY (R) ILT = BELT -TY TM In-Line Tie IT = In-Line Tie M Size: Approximate Maximum Bundle Diameter in Inches -- Cross Section: M = Miniature I = Intermediate S = Standard HS = Heavy-Standard LH = Light-Heavy M Package Size: C = 100 TL = 250 D = 500 M = 1000 Color: See Material/Color chart. Not all ties available in all colors. Material/Color Chart Material/Color Nylon 6.6 -- Natural (See Note) Weather Resistant Nylon 6.6 -- Black PANDUIT (R) Mil Spec Suffix* Suffix** 9 0 N/A Ultraviolet Red Ultraviolet Yellow Ultraviolet Butterscotch Ultraviolet Green Ultraviolet Hunter Green UV2 UV4 UV4A UV5A UV5B N/A N/A N/A N/A N/A Material/Color Ultraviolet Dark Blue Ultraviolet Light Blue Ultraviolet Cobalt Blue Ultraviolet Purple Ultraviolet Silver Ultraviolet Teal Ultraviolet Pink Ultraviolet Tan PANDUIT (R) Mil Spec Suffix** Suffix* UV6 N/A UV6A N/A UV6B N/A UV7A N/A UV8 N/A UV11 N/A UV16B N/A UV18 N/A * NOTE: designates PANDUIT (R) standard Natural Nylon 6.6 color.material. No suffix required in part number. ** NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368). Part Number ILT2S-C ILT3S-C ILT4S-C Standard Packaging Natural Available Color/ Nylon 6.6 Material (Suffix) 0 0 0 Part Number CBR1M-M CBR1.5M-M CBR2M-M CBR1.5I-M CBR3I-M CBR4I-M CBR2S-M CBR3S-M CBR4S-M CBR2HS-D CBR4LH-TL CBR6LH-C ILT1M-M ILT1.5I-M ILT2S-M ILT3S-M ILT4S-M ILT4LH-TL ILT6LH-C IT940-C IT965-C IT9100-C IT9115-C IT9150-C IT9250-C Bulk Packaging Natural Available Color/ Nylon 6.6 Material (Suffix) 0 0 0 0 0 0 0, 39 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0, UV2, UV4, UV6, UV6A, UV7A, UV8, UV16B 0, UV2, UV4, UV4A, UV5A, UV5B, UV6, UV6A, UV6B, UV7A, UV8, UV11, UV16B, UV18 0 0 Most commonly used parts appear in BOLD. 39 TAK -TY (R) Hook & Loop Cable Ties TAK-TY (R) Hook & Loop Cable Ties * Releasable and reusable hundreds of times * No risk of over tensioning and damaging high performance cabling * No installation tool needed * No waste -- excess can be wrapped around bundle * Cinch ties -- Pass hook portion through plastic cinch ring. Pull end of tie against ring to tension. Secure hook portion against loop portion of tie body to fasten * Loop and Strip ties have hooks on one side and loops on the other, so it adheres to itself; wrap around bundle and secure end of tie on the body * HLM-15R can be used with ABM3H-A-L, ABM4H-A-L, TM3S8-C, TM3S10-C and TM3S25-C mounts * Loop and Strip ties (in black and maroon) are UL Listed for use in air handling spaces per NEC section 300-22 (c) and (d) and are UL94V-2 flame rated HLC Series HLS/HLSP/HLM Series CINCH TIES -- CINCH RING PROVIDES EXTRA STRENGTH AND BUNDLE TIGHTNESS Length Width Part Number in. (mm) in. (mm) HLC3S-X0 12.0 (305) .750 (19.1) HLC5S-X0 18.0 (457) Thickness in. (mm) Head Width in. (mm) .10 (2.5) 1.10 (27.9) Min. Bundle Dia. in. (mm) 2.00 (51) 3.00 (76) Max. Bundle Dia. in. (mm) 3.00 (76) 5.00 (127) Min. Loop Tensile Strength* Lbs. (N) 50 (222) Packaging** Std. Pkg. Qty. Std. Ctn. Qty. 10 100 10 100 LOOP TIES -- SLOT ALLOWS FOR PRE-WRAPPING OF BUNDLES Length Width Part Number in. (mm) in. (mm) HLT2I-X0 8.0 (203) .50 (12.7) HLT3I-X0 12.0 (305) Thickness in. (mm) Head Width in. (mm) .10 (2.5) 1.00 (25.4) Min. Bundle Dia. in. (mm) .25 (6) .25 (6) Max. Bundle Dia. in. (mm) 1.91 (49) 3.18 (81) .25 (6) .25 (6) 1.91 (49) 3.18 (81) Min. Loop Tensile Strength* Lbs. (N) 40 (178) Packaging** Std. Pkg. Qty. 10 Std. Ctn. Qty. 100 10 100 10 100 10 100 UL LISTED LOOP TIES ** -- LARGER HLTP2I-X12 8.0 (203) 12.0 (305) HLTP3I-X12 .50 (12.7) .10 (2.5) 1.00 (25.4) 40 (178) STRIP TIES -- ROLLS PERFORATED IN CONVENIENT 6", 12" AND 18" STRIPS Length in. (mm) 6.0 (152) 12.0 (305) 18.0 (457) Part Number HLS1.5S-X0 HLS3S-X0 HLTP/HLSP Only HLT/HLTP Series HLS5S-X0 Width in. (mm) Thickness in. (mm) .750 (19.1) .10 (2.5) Head Width in. (mm) -- Min. Bundle Dia. in. (mm) .25 (6) Max. Bundle Dia. in. (mm) 1.50 (38) 3.20 (81) 5.00 (127) Min. Loop Tensile Strength* Lbs. (N) 50 (222) Packaging** Std. Pkg. Qty. 10 Std. Ctn. Qty. 100 10 100 10 100 10 100 10 100 10 100 UL LISTED STRIP TIES ** -- LARGER Color Chart Color Part Number Suffix Example Black 0 HLT2I-X0 Red 2 HLT2I-X2 Orange 3 HLT2I-X3 Yellow 4 HLT2I-X4 Green 5 HLT2I-X5 Blue 6 HLT2I-X6 Gray 8 HLT2I-X8 White 10 HLT2I-X10 Maroon 12 HLTP2I-X12 HLSP1.5S-X12 6.0 (152) HLSP3S-X12 12.0 (305) 18.0 (457) HLSP5S-X12 .750 (19.1) .10 (2.5) -- .25 (6) 1.50 (38) 3.20 (81) 5.00 (127) 50 (222) 15' & 75' ROLLS -- CAN BE CUT TO DESIRED LENGTH, ELIMINATING WASTE Part Number Length Width in. (mm) in. (mm) HLM-15R0 180.0 (4572) .33 (8.4) HLS-15R0 180.0 (4572) .750 (19.1) 900.0 (22,860) .750 (19.1) HLS-75R0 Thickness in. (mm) Head Width in. (mm) Min. Bundle Dia. in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength* Lbs. (N) 18 (80) .10 (2.5) -- .25 (6) Various 50 (222) Packaging** Std. Pkg. Qty. Std. Ctn. Qty. 1 10 1 10 1 10 *Minimum 2" overlap required to achieve loop tensile rating (HLC, HLT, HLS, HLM series). **Available in -0 (Black) rated 18lbs. (80N). 40 Most commonly used parts appear in BOLD. **Order the number of pieces required in multiples of package quantities. For colors and other materials, see page 42 . All part numbers shown in standard package quantities unless denoted by . TAK -TY (R) Hook & Loop Grommet Cinch Ties TAK-TY (R) Hook & Loop Grommet Cinch Ties Part Number * Sturdy brass grommet and washer provides strength and high visibility for mounting in poor lighting conditions * 1/4" (M6) diameter mounting hole fits drywall screws up to #12 screw size * Grommet allows for mounting of the cinch ties prior to cable installation for easier handling of cable bundles with tie pre-positioned and anchored * No sharp edges to damage cables * Releasable and Reusable Length Width Thickness in. (mm) in. (mm) in. (mm) Head Width in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N)* Packaging** Std. Pkg. Qty.** Std. Ctn. Qty.** Bulk Pkg. Qty. Bulk Ctn. Qty. GCTC SERIES -- GROMMET CINCH TIE CENTER MOUNT (Centers bundle over mounting point) GCTC3S-X0 GCTC5S-X0 12.0 (305) 18.0 (457) .750 (19.1) .10 (2.5) 1.10 (27.9) 3.00 (76.2) 30 (133) 10 100 -- -- 5.00 (127) 50 (222) 10 100 -- -- GCTE SERIES -- GROMMET CINCH TIE END MOUNT (Offsets bundle next to mounting point) GCTE2S-X0 GCTE4S-X0 10.5 (267) 16.5 (419) .750 (19.1) .10 (2.5) 1.10 (27.9) 2.20 (55.8) 4.10 (104.1) 50 (222) 10 100 -- -- 10 100 -- -- *Tensile Strength achieved with 2" overlap. **Order the number of pieces required in multiples of package quantities. All part numbers shown in standard package quantities unless denoted by . Most commonly used parts appear in BOLD. 41 Part Number Suffix Codes for All Hook & Loop Cable Ties Part Number System (Example of HLC3S-X0) HLC Part Description: HL = Hook & Loop HLC = H&L Cinch Tie HLT = H&L Tie HLTP* = H&L Tie Plenum HLS = H&L Strip HLSP* = H&L Strip Plenum HLM = H&L Strip Miniature GCT = Grommet Cinch Tie 3 S Size: Approximate Maximum Bundle Diameter in Inches -- Cross Section: I = Intermediate S = Standard X Package Size: X = 10 15R = 15' Roll 75R = 75' Roll 0 Color: See Material/ Color chart. Not all ties available in all colors. Material/Color Chart Color Black Red Orange Yellow Green Part Number GCTC3S-X GCTC5S-X GCTE2S-X GCTE4S-X HLC3S-X HLC5S-X HLM-15R HLS-15R HLS-75R HLS1.5S-X HLS3S-X HLS5S-X HLT2I-X HLT3I-X *HLSP1.5S-X *HLSP3S-X *HLSP5S-X *HLTP2I-X *HLTP3I-X PANDUIT (R) Suffix 0 2 3 4 5 Color Blue Gray White Maroon Standard Packaging Available Color/ Material (Suffix) 0 0 0 0 0 0 0, 2, 3, 4, 5, 6, 8, 10 0, 2, 3, 4, 5, 6, 8, 10 0, 2, 3, 4, 5, 6, 8, 10 0, 2, 3, 4, 5, 6, 8, 10 0, 2, 3, 4, 5, 6, 8, 10 0, 2, 3, 4, 5, 6, 8, 10 0, 2, 3, 4, 5, 6, 8, 10 0, 2, 3, 4, 5, 6, 8, 10 0,12 0,12 0,12 0,12 0,12 *HLSP and HLTP are unique Hook & Loop style ties that are UL Listed for use in air-handling spaces per NEC section 300-22 (c) and (d) and are UL94V-2 flame rated. Available in Black (-X0) and Maroon (-X12). 42 Most commonly used parts appear in BOLD. PANDUIT (R) Suffix 6 8 10 12 STA-STRAP (R) Cable Ties (SSC/SST Series) STA-STRAP (R) Nylon 6.6 Cable Ties * STA -STRAP (R) Cable Ties -- Use for normal bundling and through-panel applications * STA -STRAP (R) Clamp Ties -- Only clamp that can be pre-mounted before tying bundle * Low profile head for use in compact areas * Two piece design provides low thread force to reduce installer fatigue * Lower weight than comparable one-piece ties * Releasable (prior to final tensioning and cut-off) -- Helpful in assembly SSC Series B E E A C D ALTERNATE HEAD DESIGN - SSC2S ONLY SST Series B E A C D STA-STRAP (R) Clamp Head Cable Ties -- SSC Series Part Number Boss Length Width Thickness Height A B C D in. (mm) in. (mm) in. (mm) in. (mm) Boss Max. Width Bundle E Dia. in. (mm) in. (mm) Min. Loop Tensile Strength Lbs. (N) Screw Size Packaging* Recommended PANDUIT (R) Installation Tool Part No. Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. STANDARD CROSS SECTION SSC2S-S10-C 7.4 (187) .180 (4.6) .045 (1.2) .310 (7.9) .430 (10.9) 1.75 (45) 50 (222) #10 (M5) GTS, GS2B, GTH, GS4H, PTS or PPTS 100 100 1000 1000 .065 (1.5) .460 (11.7) .53 (13.5) 4.00 (102) 120 (534) 1/4 (M6) GTH, GS4H, GS4EH or PPTEH 50 500 500 2500 HEAVY CROSS SECTION SSC4H-S25-L 15.6 (395) .300 (7.6) STA-STRAP (R) Cable Ties -- SST Series Part Number Length A in. (mm) Width Thickness B C in. (mm) in. (mm) Head Height D in. (mm) Head Width E in. (mm) .150 (3.8) .175 (4.5) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. 18 (80) GTS, GS2B, PTS or PPTS Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 1000 1000 50000 100 1000 1000 50000 100 1000 1000 25000 100 1000 1000 25000 3.00 (76) 100 1000 1000 10000 1.75 (45) 100 1000 1000 15000 100 1000 1000 10000 100 1000 1000 5000 -- -- 500 2500 -- -- 500 2000 MINIATURE CROSS SECTION SST1M-C SST1.5M-C 4.0 (102) 5.5 (140) .095 (2.4) .035 (.9) .037 (.9) .78 (20) 1.25 (32) INTERMEDIATE CROSS SECTION SST1.5I-C 5.3 (137) SST2I-C 8.1 (206) SST3I-C .037 (.9) .135 (3.4) 11.0 (279) .040 (1.0) 1.25 (32) .210 (5.3) .240 (6.1) 2.00 (50) 40 (178) GTS, GS2B, PTS or PPTS STANDARD CROSS SECTION SST2S-C SST3S-C SST4S-C 6.7 (172) 11.0 (279) .045 (1.2) .180 (4.6) 15.0 (381) .048 (1.2) .250 (6.4) .310 (7.9) .253 (6.4) .350 (8.9) .325 (8.3) .460 (11.7) 3.00 (76) 50 (222) GTS, GS2B, GTH, GS4H, PTS, PPTS, STS2 or STH2 4.00 (102) HEAVY CROSS SECTION SST4H-D SST8H-D 14.8 (376) 27.5 (699) .300 (7.6) .067 (1.7) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see page 45. All part numbers shown in standard package quantities unless denoted by . 4.00 (102) 8.00 (203) 120 (534) GTH, GS4H, GS4EH or PPTEH Most commonly used parts appear in BOLD. 43 STA-STRAP (R) Cable Ties (SSPM Series) Three Easy Steps... STA -STRAP (R) Chassis/Panel Mount Tie -- Weather Resistant Heat Stabilized Nylon 6.6 1 Insert tip end of STA-STRAP (R) cable tie through the correct size pre-drilled hole in the panel. Applications: * Run cable and hose along truck frame rails * Secure a bundle under a chassis assembly * Manage wire harnesses in the cab and sleeper * Use a through-hole in frame/chassis to mount 2 Wrap cable tie around the bundle and insert the tip end back through the hole and head of the cable tie. 3 Solution: PANDUIT (R) STA -STRAP (R) Chassis Mount Ties are uniquely designed to secure a bundle directly to a chassis or panel utilizing a through-hole. Pull tip end until STA-STRAP (R) cable tie is snug on bundle. Tension and cut off excess portion with PANDUIT (R) cable tie installation tool. Features: * Eliminates the need for separate fasteners to reduce costs and decrease installation time * Remains adjustable and releasable until tie is tensioned and cut-off * Installs easily with PANDUIT (R) hand-operated tools * Engages clearance hole with optional centering pilot (2 designs) to prevent tie from shifting or abrading during vehicle operation B * Optional Long Centering Pilot * Pilot ears protect strap body from clearance hole edges A REF. OPTICAL CENTERING PILOT To ensure coverage of hole up to .70" (18mm) C Without Pilot With Pilot D With Long Centering Pilot HEAVY CROSS SECTION Part Number D A B C Head Length Width Thickness Height in. (mm) in. (mm) in. (mm) in. (mm) Recommended Panel Hole Dia. in. (mm) Maximum Bundle Diameter in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 50 2500 250 2500 50 2500 250 2500 50 2500 250 2500 50 2500 250 2500 -- -- 250 2500 WITHOUT PILOT SSPM2.5H-L300 SSPM4H-L300 10.1 (257) 14.8 (376) .30 (7.6) .062 (1.6) .248 (6.3) .316 to.820 (8.0 to 21) 2.76 (70) 4.00 (102) 120 (534) GTH, GS4H, GS4EH, PPTEH, STH2 or ST2EH 10.1 (257) 14.8 (376) .30 (7.6) .062 (1.6) .248 (6.3) .440 to.820 (11.2 to 21) 2.76 (70) 4.00 (102) 120 (534) GTH, GS4H, GS4EH, PPTEH, STH2 or ST2EH .062 (1.6) .248 (6.3) .440 to.820 (11.2 to 21) 4.00 (102) 120 (534) WITH PILOT SSPM2.5HP-L300 SSPM4HP-L300 WITH LONG CENTERING PILOT SSPM4HLP-TL300 44 14.8 (376) .30 (7.6) Most commonly used parts appear in BOLD. GTH, GS4H, GS4EH, PPTEH, STH2 or ST2EH *Order the number of pieces required in multiples of package quantities. All part numbers shown in standard package quantities unless denoted by . Part Number Suffix Codes for All STA-STRAP (R) Cable Ties Part Number System (Example of SST1M-C) SST 1 Part Description: SST = STA-STRAP (R) Tie SSC = STA-STRAP (R) Clamp SSPM = STA-STRAP (R) Panel Mount SSB = STA-STRAP (R) Bow-Ty SSM = STA -STRAP (R) Marker Size: Approximate Maximum Bundle Diameter in Inches M C -- Cross Section: M = Miniature I = Intermediate S = Standard LH = Light-Heavy H = Heavy HH = Heavy Head Screw Hole Size: (Clamp Ties Only) -S6 = #6 (M3) -S10 = #10 (M5) -S25 = 1/4 (M6) Package Size: L = 50 C =100 TL = 250 D = 500 M = 1000 Color: See Material/ Color chart. Not all ties available in all colors. Material/Color Chart PANDUIT (R) Mil Spec Suffix** Material/Color Suffix* Nylon 6.6 -- Natural (see note) 9 0 N/A Weather Resistant Nylon 6.6 -- Black Nylon 6.6 -- Black 20 N/A PANDUIT (R) Mil Spec Suffix** Suffix* 30 N/A 300 N/A Material/Color Heat Stabilized Nylon 6.6 -- Black Heat Stabilized Weather Resistant Nylon 6.6 -- Black *NOTE: designates PANDUIT (R) standard Natural Nylon 6.6 color.material. No suffix required in part number. **NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368). Part Number SSPM2.5H-L SSPM2.5HP-L SSPM4H-L SSPM4HP-L Standard Packaging Natural Nylon Available Color/ 6.6 Material (Suffix) 300 300 300 300 SSC2S-S10-C SSC2S-S6-C SSC4S-S10-C SSC4H-S25-L SSM2S-C SST1M-C SST1.5M-C SST1.5I-C SST2I-C SST3I-C SST4I-C 0 SST2S-C SST3S-C SST4S-C 0 0 0 SST4H-L 0 SST8H-L SSB2S-C 0 0 Bulk Packaging Part Number SSPM2.5H-TL SSPM2.5HP-TL SSPM4H-TL SSPM4HP-TL SSPM4HLP-TL SSC2S-S10-M SSC2S-S6-M SSC4S-S10-M SSC4H-S25-D SSM2S-D SSM4S-D SST1M-M SST1.5M-M SST1.5I-M SST2I-M SST3I-M SST4I-M SST1.5S-M SST2S-M SST3S-M SST4S-M SST2H-D SST4H-D SST4HH-D SST8H-D SSB2S-M Natural Nylon 6.6 Available Color/ Material (Suffix) 300 300 300 300 300 0, 30 0 0 0 0 0, 20, 30 0, 20, 30 0 0, 20 0 0 0 0, 20, 30 0, 20, 30 0, 2, 30 0 0, 30 30 0, 30 0, 30 Most commonly used parts appear in BOLD. 45 Specialty Ties PANDUIT (R) Stud Mounted Heat Stabilized Nylon 6.6 Cable Ties Base portion pushes onto a threaded stud and the tie portion wraps around the bundle. The wire bundle is centered over the stud. B A REF. C D Except PLST4H Part Number Thickness C in. (mm) Head Height D in. (mm) Recommended Stud Size in. (mm) .19 (4.8) .050 (1.3) .41 (10.5) 10-24 (5) .300 (7.6) .075 (1.9) .265 (6.7) 1/4-20 (6) Length Width A B in. (mm) in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. 50 (222) GTS, GS2B GTH, GS4H, PTS, PPTS, STS2 or STH2 Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 500 5000 -- -- 500 5000 -- -- 250 2500 STANDARD CROSS SECTION PLST30SC-D30 PLST50SC-D30 5.74 (146) 8.14 (207) 1.18 (30) 1.97 (50) HEAVY CROSS SECTION PLST4HS25-TL300 15.3 (389) Ladder Style Stud Mounted Cable Tie Heat Stabilized Nylon 6.6 4.00 (102.1) 120 (534) GTH, GS4H, GS4EH or PPTEH The ties can be removed from the stud by turning counterclockwise. Adjustable and releasable. B A REF. C D Part Number Length Width Thickness A B C in. (mm) in. (mm) in. (mm) Head Height D in. (mm) Recommended Stud Size in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. .59 (15) 10-24 (5) 1.18 (30) 35 (156) Hand Installed Only Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 1000 10000 STANDARD CROSS SECTION PRST30S-S14-M30 46 5.2 (132) .38 (9.7) .050 (1.3) Most commonly used parts appear in BOLD. *Order the number of pieces required in multiples of package quantities. For colors and other materials, see page 50. All part numbers shown in standard package quantities unless denoted by . Specialty Ties Applications: * Underhood hose and harness routing * Areas where bundles must be secured parallel to each other or another element Solution Looking for a labor saving alternative to cushioned clamps when securing hoses and wire bundles? PANDUIT (R) Multiple Loop Cable Ties are the perfect solution. PANDUIT (R) Multiple Loop Cable Ties -- Nylon 6.6 Features and Benefits: * Offers multiple loop capability * Prevents bundle damage with a wire strap body that spreads the clamping forces * Provides high tensile strength to route bundles securely * Installs easily by hand -- use PANDUIT (R) tooling for repeatable tension and cut-off * Reduces part number inventory with a single product to cover multiple bundle sizes B E A Except PLB4H-0 D2 REF. D1 REF. F C D Max. Combined Bundle dia. Length Width Thickness D1 & D2 A B C Part Number in. (mm) in. (mm) in. (mm) in. (mm) Packaging* Head Height D in. (mm) Head Width E in. (mm) Head Length F in. (mm) Min. Loop Recommended Tensile PANDUIT (R) Installation Strength Tool Part No. Lbs. (N) Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 1000 1000 10000 100 1000 1000 10000 100 1000 1000 5000 -- -- 250 2500 -- -- 250 2500 STANDARD CROSS SECTION PLB2S-C PLB3S-C PLB4S-C 1.8 (46) 7.6 (193) 3.0 (76) 11.8 (300) 4.1 (104) 14.8 (376) .320 (8.1) .19 (4.8) .052 (1.3) .220 (5.6) .465 (11.8) .337 (8.6) GTS, GS2B. GTH, GS4H, PTS, PPTS, STS2 or STH2 50 (222) HEAVY CROSS SECTION PLB4H-TL PLB4H-TL0 3.6 (91) 14.7 (373) .300 (7.6) .075 (1.9) .322 (8.2) .490 (12.4) 1.1 (27.9) GTH, GS4H, GS4EH, or PPTEH 120 (534) PANDUIT (R) Multiple Loop Cable Ties -- Weather Resistant Nylon 6.6 B E D3 D2 A D1 C D F Part Number Max. Combined Head Bundle Dia. Length Width Thickness Height D1, D2 & D3 A B C D in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) Head Head Width Length E F in. (mm) in. (mm) Packaging* Min. Loop Tensile Strength Lbs. (N) Recommended PANDUIT (R) Installation Tool Part No. 125 (556) GS4EH or PPTEH Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 100 1000 EXTRA-HEAVY CROSS SECTION PL3B5EH-C0 5.0 (127) 20.0 (508) .500 (12.7) .075 (1.9) *Order the number of pieces required in multiples of package quantities. For colors and other materials, see page 50. All part numbers shown in standard package quantities unless denoted by . .400 (10.2) .800 (20.3) 1.8 (45.7) Most commonly used parts appear in BOLD. 47 Specialty Ties Double Hose Clamp Weather Resistant Nylon 6.6 The Double Hose Clamp can be used on gasoline, hydraulic or pneumatic hoses. It holds each hose individually to prevent abrasion and holds them together to prevent twisting. B E FIXED LOOP ADJUSTABLE LOOP A REF. C D Part Number DHC1.12x1.75-D0 Length Width A B in. (mm) in. (mm) 11.0 (279) .28 (7.1) Loop Diameters Thickness C in. (mm) Head Height D in. (mm) Head Width E in. (mm) Fixed Loop in. (mm) Adjustable Loop in. (mm) Min. Loop Tensile Strength Lbs. (N) .050 (1.3) .31 (7.9) .44 (11.2) 1.12 (28.4) 1.0 to 1.75 (25 to 44) 100 (445) Recommended Std. PANDUIT (R) Installation Pkg. Tool Part No. Qty. GTH, GS4H, STH2 or ST2EH Packaging* Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- 500 2500 -- Curved tip up GS4H 1. Wrap clamp around hose. 48 2. Position second hose in clamp. Most commonly used parts appear in BOLD. 3. Loop tail around second hose and thread tail through both spacer heads. 4. Tension and cut off with PANDUIT (R) tool. *Order the number of pieces required in multiples of package quantities. For colors and other materials, see page 50. All part numbers shown in standard package quantities unless denoted by . Specialty Ties Polyethylene Cable Marker Strap For identifying telephone and fiber optic cable. Replaces costly and cumbersome lead marking tags. Lightweight and easy-to-install. Can be used as wrap-around or "flag" marker. Can also be used in underground identification applications. Custom hot stamping is available (see page 52). .75 (19.1) 1.50 (38.1) 3.88 (98.5) 15.25 (387.4) .033 (.84) Loop Excess Thru Slot Unique design allows strap to be used as: Part Number Color Marking Area in. (mm,) Max. Bundle Dia. in. (mm) Recommended PANDUIT (R) Installation Tool Part No. 1.50 x 2.62 (38.1 x 66.5) 4.38 (111) Hand Installed Only Packaging* Std. Pkg. Qty. Std. Ctn. Qty. 50 500 50 500 STANDARD CROSS SECTION CM4S-L2 Red CM4S-L8 Gray *Order the number of pieces required in multiples of package quantities. For colors and other materials, see page 50. All part numbers shown in standard package quantities unless denoted by . WRAP-AROUND MARKER (Min. Dia.: 1.27") "FLAG" MARKER (Min. Dia.: 25") Most commonly used parts appear in BOLD. 49 Part Number Suffix Codes for All PANDUIT (R) Specialty Cable Ties Part Number System (Example of PLST4HS25-TL) PLST 4 Size: Approximate Maximum Bundle Diameter in Inches Part Description: CM4S = Cable Marker Strap DHC = Double Hose Clamp PLST = Lock. Stud Mounted PLB = Locking Bow Tie PRST = Releas. Stud Mounted (Ladder Style) H S25 Cross Section: S = Standard H = Heavy EH = Extra-Heavy -- Stud Size: -S25 = 1/4" (M6) -SC = .20" (5mm) TL Package Size: L = 50 C = 100 TL = 250 D = 500 Color: See Material/ Color chart. Not all ties available in all colors. Material/Color Chart Material/Color Natural Nylon 6.6 (See Note) Weather Resistant Nylon 6.6 Nylon 6.6 -- Red PANDUIT (R) Mil Spec Suffix* Suffix** 9 0 N/A 2 2 PANDUIT (R) Mil Spec Suffix** Suffix* 8 8 30 N/A 300 N/A Material/Color Nylon 6.6 -- Gray Heat Stabilized Black Nylon 6.6 Heat Stabilized Weather Resistant Nylon 6.6 *NOTE: designates PANDUIT (R) standard Natural Nylon 6.6 color/material. No suffix required in part number. **NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368). Part Number CM4S-L PLB2S-C PLB3S-C PLB4S-C 50 Standard Packaging Natural Available Color/ Nylon 6.6 Material (Suffix) 2, 8 0 0 Most commonly used parts appear in BOLD. Part Number DHC1.12X1.75-D PLB2S-M PLB3S-M PLB4S-M PLB4H-TL PL3B5EH-C PLST4HS25-TL PLST30SC-D PLST50SC-D PRST40SC-D Bulk Packaging Natural Available Color/ Nylon 6.6 Material (Suffix) 0 0, 30 0, 30 0, 30 0, 30 0 300 30 30 30 Military Cross Reference Aerospace and Military Standard cross reference to PANDUIT (R) part numbers The PANDUIT (R) Cable Ties and Marker Ties listed in the table below meet all the testing requirements of Aerospace Standard SAE-AS23190A (formerly MIL-S-23190E) and the dimensional requirements of Aerospace Standards SAE-AS33671 (formerly MS3367) and SAE-AS33681 (formerly MS3368). Cable Ties PAN-TY Cable Tie Part Number PLT2S PLT4S PLT4H PLT.7M PLT1M PLT1.5I PLT8LH -- PLT3S -- -- -- -- -- -- (R) Current MIL Std. Part Number* MS3367-1-* MS3367-2-* MS3367-3-* MS3367-4-* MS3367-4-* MS3367-5-* MS3367-6-* MS3367-6-* MS3367-7-* MS3367-23-* MS3367-24-* MS3367-25-* MS3367-26-* MS3367-27-* MS3367-29-* DOME-TOP (R) Barb Ty Cable Tie Part Number BT2S BT4S BT4LH -- BT1M BT1.5I BT8LH BT9LH BT3S -- -- -- -- -- -- STA-STRAP (R) Cable Tie Part Number SST2S SST4S SST4H -- SST1M SST1.5I SST8H -- SST3S -- -- -- -- -- -- BELT -TY TM In-Line Cable Tie Part Number -- -- -- -- -- -- -- -- -- ILT2S ILT4S ILT4LH ILT1M ILT1.5I ILT3S Marker Ties Current MIL Std. Part Number* MS3368-1-*A MS3368-2-*A MS3368-3-*C MS3368-4-*D MS3368-5-*E PAN-TY (R) Cable Tie Part Number PLM2S PLM4S PL2M2S PL3M2S PLM1M DOME-TOP (R) Barb Ty Cable Tie Part Number BM2S BM4S B2M2S B3M2S BM1M The PANDUIT (R) Installation Tools listed in the table below meet all the testing requirements of MIL-T-81306 and the dimensional requirements of MS90387. Installation Tools Current MIL Std. Part Number* MS90387-1 MS90387-2 MS90387-3 Tool Part Number GTS, GS2B GS4H GS4MT * Color Code (See Material/Color Chart located in the back of each product line section). Most commonly used parts appear in BOLD. 51 Custom Hot Stamping PANDUIT (R) Custom Hot Stamping Program A custom program to mark nylon cable ties, marker ties and marker plates to suit your application requirements . . . * Economical * Convenient * 1/8" (3mm), 3/16" (4.8mm), 5/64" (2mm) and 7/64" (2.8mm) characters are available * Standard Type Style: News Gothic * Character sizes can be mixed from line-to-line * Alphanumeric and sequential numbering for serialization are available * Sequential numbering available in 3/32" (2.4mm), 9/64" (3.6mm), and 1/8" (3mm) characters * Seven colors of hot stamping to make your message stand out -- Black, Blue, Green, Red, Yellow, Orange and White * Special logos, type styles and sizes can be provided (when camera ready artwork is supplied) * Minimum order: 5,000 pieces per part number and message Cable Tie Cross Sections INTERMEDIATE (Locking) STANDARD (Locking and Releasable) LIGHT-HEAVY AND HEAVY (Locking and Releasable) EXTRA-HEAVY (Locking and Releasable) Marker Tie Cross Sections MINIATURE (Locking) STANDARD (Locking) NOTE: Most cable ties and marker ties are available in colors (See information at the back of each tie section). Contact Your Local PANDUIT (R) Distributor for Details 52 Most commonly used parts appear in BOLD. PAN -POUCH TM Telephone Cable Identification Kit PANDUIT (R) PAN-POUCH TM Telephone Cable Identification Kit The PAN -POUCH TM system provides a fast, convenient method of identifying binder groups on both sides of a splice in PIC cable. It consists of striped PAN -TY (R) Cable Ties in 25 color combinations which match the universally accepted Even-Count Color Code. In addition, solid color ties are available for identification of "Super Groups" in cable containing more than 600 pairs. Cable ties have maximum bundle diameter of .82" (21mm). Each 50 pc. package fits into PAN -POUCH TM over Pocket Pouch. .100 (2.5) .185 (4.7) 3.8 (95) .175 (4.4) .154 (3.9) .036 (.9) Nylon 6.6 Cable Ties Packaging* Part Number Cable Tie Color PLT1M-L6-10 PLT1M-L3-10 PLT1M-L5-10 PLT1M-L1-10 PLT1M-L8-10 Blue Orange Green Brown Slate PLT1M-L6-2 PLT1M-L3-2 PLT1M-L5-2 PLT1M-L1-2 PLT1M-L8-2 Blue Orange Green Brown Slate PLT1M-L6-0 PLT1M-L3-0 PLT1M-L5-0 PLT1M-L1-0 PLT1M-L8-0 Blue Orange Green Brown Slate Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Part Number Cable Tie Color White 50 50 50 50 50 1000 1000 1000 1000 1000 PLT1M-L6-4 PLT1M-L3-4 PLT1M-L5-4 PLT1M-L1-4 PLT1M-L8-4 Blue Orange Green Brown Slate Red 50 50 50 50 50 1000 1000 1000 1000 1000 PLT1M-L6-7 PLT1M-L3-7 PLT1M-L5-7 PLT1M-L1-7 PLT1M-L8-7 Black 50 50 50 50 50 1000 1000 1000 1000 1000 Color Stripe Cable ties in other solid colors (sold in 100 pc. packages) see pages 24-26. Std. Pkg. Qty. Std. Ctn. Qty. Yellow 50 50 50 50 50 1000 1000 1000 1000 1000 Blue Orange Green Brown Slate* Violet 50 50 50 50 50 1000 1000 1000 1000 1000 PLT1M-L2 PLT1M-L0 PLT1M-L4 Red Black* Yellow* -- 50 50 50 1000 1000 1000 PLT1M-L6 PLT1M-L3 PLT1M-L5 PLT1M-L1 PLT1M-L8 Blue* Orange* Green* Brown* Slate* -- 50 50 50 50 50 1000 1000 1000 1000 1000 *Not included in filled PA N-PO UCH TM Color Stripe . Pouches PAN-POUCH TM is 10 1/2" x 38" (267mm x 965mm) made of 2 ply laminated black nylon/ vinyl and folds to 10 1/2" x 6" (266m x 152mm) for easy storage. The pouch can be easily hung from cable by using Hook & Loop fasteners. Packaging* Part Number Description PPC25x50F PAN-POUCH TM filled with 1250 cable ties. 50 each of all 24 striped ties plus solid red. PPC25x50 Empty PAN -POUCH TM PP5x50F Pocket Pouch filled with 250 cable ties. 50 each: blue, orange, green, brown and slate all with white stripe. Pouch Material Std. Pkg. Qty. 2 ply Laminated Black Nylon/ Vinyl 1 Vinyl 1 1 Pocket Pouch holds five (50 pc.) packages. *Order by the number of pieces required in multiples of package quantities. All part numbers shown in standard package quantities unless denoted by . Most commonly used parts appear in BOLD. 53 Cable Tie Kits Cable Tie Kits in Plastic Boxes -- KP-506A/KP-506A-0 Cable Ties and Accessories Kit Part Number Description KP-506A Contains natural nylon ties for indoor use: (100) PLT1M-C Cable Ties (100) PLT1.5I-C Cable Ties (100) PLT2S-C Cable Ties (50) ABM2S-A Mounts (1) Plastic Kit Box KP-506A-0 KP-509 KP-509 Designer's Kit KB-550 KB-551 Cable Tie Kits in Steel Boxes -- K-504 Cable Ties and Accessories Kit K-504 SR2 K-205 Cable Ties and Terminal Kit 54 Most commonly used parts appear in BOLD. Std. Pkg. Qty.* K-205 Contains weather resistant cable ties and mounts for outdoor use: (100) PLT1M-C0 Black Weather Resistant Cable Ties (100) PLT1.5I-C0 Black Weather Resistant Cable Ties (100) PLT2S-C0 Black Weather Resistant Cable Ties (50) ABM2S-AT-0 Black Weather Resistant Mounts (1) Plastic Kit Box A special collection of cable ties and wiring accessories for prototyping and new product development. Contains (over 600 pieces): Including PAN-TY (R) Cable Ties (in different styles, sizes, colors and materials); 25 different cable tie mounts; 30 different wiring accessories; (1) Plastic Kit Box Assortment Pack contains natural and weather resistant PAN-TY (R) nylon cable ties: (15) PLT1M Cable Ties (10) PLT1M Black Weather Resistant Cable Ties (15) PLT1.5I Cable Ties (10) PLT1.5I Black Weather Resistant Cable Ties (15) PLT2S Cable Ties (10) PLT2S Black Weather Resistant Cable Ties (15) PLT3S Cable Ties (10) PLT3S Black Weather Resistant Cable Ties Assortment Pack contains natural and weather resistant DOME-TOP (R) Barb Ty nylon cable ties: (15) BT1M Cable Ties (10) BT1M Black Weather Resistant Cable Ties (15) BT1.5I Cable Ties (10) BT1.5I Black Weather Resistant Cable Ties (15) BT2S Cable Ties (10) BT2S Black Weather Resistant Cable Ties (15) BT3S Cable Ties (10) BT3S Black Weather Resistant Cable Ties Contains cable ties, adhesive backed mounts and cable tie installation tool: (100) PLT1M-C Cable Ties (100) PLT1.5I-C Cable Ties (100) PLT2S-C Cable Ties (100) PLC2S-S10-C Clamp Ties (100) TM2S8-C Mounts (100) ABM2S-A-C Mounts (1) STS2 Tool (1) Steel Kit Box 2-Drawer Slide Rack to hold K-504 Kit or K-1100 Series Terminal Kits. See PANDUIT (R) Terminal Catalog, SA101N21B-NL. Contains 300 cable ties, 600 terminals and 2 installation tools: (100) PLT1M-C Cable Ties (100) PLT1.5I-C Cable Ties (100) PLT2S-C Cable Ties (1) GTS Cable Tie Installation Tool (100) PV18-6LF-C Terminals (100) PV14-8LF-C Terminals (100) PV14-10LF-C Terminals (50) PV10-10LF-L Terminals (100) BSV18X-C Splices (100) BSV14X-C Splices (50) BSV10X-L Splices (1) CT-100 Crimping Tool (1) Steel Kit Box 1 1 1 1 1 1 1 1 *Order the number of kits required in multiples of package quantities. All part numbers shown in standard package quantities unless denoted by . Cable Tie Installation Tools Cable Tie Installation Tools The PANDUIT (R) Selection. . . PANDUIT (R) offers the greatest selection of job-matched tools: Tool Controlled Tension and Cutoff Tools Pneumatic Tool Controlled Tension and Cutoff Tools Operator Controlled Tension and Cutoff Tools PAT1M/PAT1.5M Automatic Cable Tie Installation Systems Choosing the right tool increases productivity. . . Whatever the need; Original Equipment Manufacturer (high, medium, low volume), maintenance/repair or construction; PANDUIT (R) has the tool to help lower your total installed cost. The following chart can be used as a guide for tool selection: Tool Cable Tie Cross Section GTS SM, M, I or S GS2B M, I, or S GTH S, HS, LH or H GS4H GS4H/B S, HS, LH or H GS4H121W S, HS, LH or H GS4EH M, I or S STH2 S, LH or H ST2EH LH, H or EH PTS PPTS PPTEH PAT1M/PAT1.5M Systems (Automatic) Per Minute Per Year Operation Typical Application(s) 4-6 Under 50,000 Hand Low to Medium Volume OEM tie usage, maintenance/ repair or construction 1-4 Under 10,000 Hand Maintenance/repair or construction 5-8 Up To 250,000 Pneumatic 250,000 and above Pneumatic/ Electric LH, H or EH STS2 STHV Cable Tie Usage LH or H SM, M, I or S M, I, or S LH, H or EH M 30-40 Medium to High Volume OEM tie usage where a variety of tie sizes are needed. High Volume OEM tie usage Most commonly used parts appear in BOLD. 55 Hand-Operated Tools Hand-Operated Tools -- The most preferred hand-operated cable tie tools in the industry. These tools are versatile and can be used for production, maintenance or construction applications. These tools will tension and cut off excess tie material flush to the head by squeezing trigger handle. Tool-Controlled Tension and Cut-Off For PANDUIT (R) Cable Ties up to 1/2" (12.7mm) wide * * * * Lightweight and balanced Requires no special maintenance Easy to change tension adjustment and easy to operate Proven features to help lower installed costs; a combination of design, operating and construction features provide a long service life * Replacement blades available Part Number GTS Description Installs PANDUIT (R) Subminiature, Miniature, Intermediate and Standard cross section cable ties. Qualified Product Listed per Mil. Std. MS90387-1 and Mil. Spec. MIL-T-81306A. Plastic molded housing. Ergonomic design. 1 Color Identification: Trigger Handle: Black Selector Knob: Black Weight: 8.8 oz. (249g) GS2B Installs PANDUIT (R) Miniature, Intermediate and Standard cross section cable ties. Qualified Product Listed per Mil. Std. MS90387-1 and Mil. Spec. MIL-T-81306A. Color Identification: Trigger Handle: Black Selector Knob: Black Weight: 11.5 oz. (327g) GTH 1 Installs PANDUIT (R) Standard, Heavy-Standard, Light-Heavy and Heavy cross section cable ties. Plastic molded housing. Ergonomic design. Color Identification: Trigger Handle: Red Selector Knob: Red Weight: 11.2 oz. (318g) GS4H 1 Installs PANDUIT (R) Standard, Heavy-Standard, Light-Heavy and Heavy cross section cable ties. Durable powder coat finish. Qualified Product Listed per Mil. Std. MS90387-2 and Mil. Spec. MIL-T-81306A. 1 Color Identification: Trigger Handle: Red Selector Knob: Red Weight: 16 oz. (454g) GS4H/B Installs PANDUIT (R) Standard, Heavy-Standard, Light-Heavy and Heavy cross section cable ties. Durable powder coat finish. High tension, factory set, non-adjustable. 1 Color Identification: Trigger Handle: Blue Weight: 16 oz. (454g) GS4H121W Installs PANDUIT (R) Standard, Heavy-Standard, Light-Heavy and Heavy cross section cable ties. This tool provides greater tension, especially on 175 lb. strength ties, which results in tighter bundles. Durable powder coat finish. 1 Color Identification: Trigger Handle: Green Selector Knob: Green Weight: 16 oz. (454g) GS4EH Installs PANDUIT (R) Light-Heavy, Heavy and Extra-Heavy cross section cable ties. Durable powder coat finish. Color Identification: Trigger Handle: Blue Selector Knob: Blue Weight: 15 oz. (426g) 56 Std. Pkg. Qty.* 1 *Order the number of pieces required in multiples of package quantities. Most commonly used parts appear in BOLD. Hand-Operated Tools Hand Operated Tools-- Installer-Controlled Tension and Cut-Off PANDUIT (R) offers an economical series of tools for maintenance or construction applications -- the user determines the required cable tie tension and the tools provide a cut-off. Used with the full line of PANDUIT (R) Cable Ties. Part Number STS2 Description Installs PANDUIT (R) Miniature, Intermediate or Standard cross section cable ties. See STH2 operation below. Color Identification: Black Weight: 2 1/2 oz. (71g) STH2 Std. Pkg. Qty.* 1 Installs PANDUIT (R) Standard, Heavy-Standard, Light-Heavy or Heavy cross section cable ties. Color Identification: Red Weight: 2 1/2 oz. (71g) INSTALLATION PROCEDURE FOR STS2 AND STH2 TOOLS 1. Install cable tie around bundle. Tension tie by squeezing tool handle. 2. Reduce tension slightly and twist tool 1/4 turn either direction for cut-off of cable tie. * Inexpensive, maintenancefree, all purpose tools * Ergonomic handle design and short handle span * Top loading feature for right or left-handed users ST2EH 1 Installs PANDUIT (R) Light-Heavy, Heavy or Extra-Heavy cross section cable ties. Color Identification: Black Handles Weight: 16 oz. (454g) After installing tie around bundle and tensioning, tool is twisted a 1/4 turn "in either direction" to cut off excess tie. 1 * Durable all steel construction * Comfortable rubber handles STHV Installs PANDUIT (R) Light-Heavy and Heavy cross section cable ties. Color Identification: All Yellow Weight: 14 oz. (399g) After installing tie around bundle, the handles are squeezed to provide tension. A separate lever cuts excess tie. 1 * Durable all steel construction * "Travel stop" helps prevent pinched fingers *Order the number of pieces required in multiples of packaging quantities. Most commonly used parts appear in BOLD. 57 Pneumatic Hand Tools Pneumatic Hand Tools PANDUIT (R) pneumatic tools tension and cut off excess tie after it is hand-installed around the bundle, minimizing operator fatigue. Tools are rugged, yet lightweight. Tool-Controlled Tension and Cut-Off For PANDUIT (R) Cable Ties up to 1/2" (12.7mm) wide * Easy to change tension adjustment * Requires no special training to use * Durable, lightweight, easy to operate and designed to reduce operator fatigue * Tensions and cuts off excess tie in a fraction of a second * Operates on non-lubricated air, without special maintenance Part Number PTS Description Installs Subminiature, Miniature, Intermediate or Standard cross section cable ties. Color identification: (Knob) Black Weight: 17.3 oz. (490g) Replacement parts can be part of a scheduled maintenance program Plastic molded housing Ergonomic design PPTS 1 Installs Miniature, Intermediate or Standard cross section cable ties. Color identification: (Knob) Black Weight: 18 oz. (510g) Replacement parts can be part of a scheduled maintenance program Powder coat finish PPTEH Std. Pkg. Qty.* 1 Installs Light-Heavy, Heavy and Extra-Heavy cross section cable ties. Color Identification: (Knob) Blue Weight: 52 oz. (1476g) Replacement parts can be part of a scheduled maintenance program Powder coat finish 1 Filter Regulator and Hose PPH10 10' (3m) Hose Assembly (regulator to tool). Includes a 1/8" NPT male connector (to regulator) and 1/8" female quick disconnect fitting (to tool). 1 PL289N1 Filter/Regulator .5 micron (max.) element, regulated range 3-100 PSIG, 1/8" ports. 1 Note: PTS, PPTS and PPTEH tools require the PPH10 hose and PL289N1 Filter/Regulator for proper operation. 58 *Order the number of pieces required in multiples of package quantities. Most commonly used parts appear in BOLD. Hand-Operated Tool Accessories Adjustment Features Each cross section of cable ties can be installed with a variety of tensions to meet the application. The proper tension range is marked on each package of cable ties. Fast and Easy Selection GTS Tool -- Tension Setting Dial GS2B Tool -- Tension Setting Knob Tool Tension Lock Kits Certain applications require a locking device on the selector knob (one cross-section size and tension only). Repair Parts Can be part of a scheduled maintenance plan or use only when cutoffs are not clean and crisp. Part Number Description KGTSTL Tension Locking Kit for GTS. KGTHTL Tension Locking Kit for GTH. KPTSTL Tension Locking Kit for PTS. TTLK3 Tool Tension Lock Kit. Each kit contains (1) #4-40 selection locking screw (with head), (1) selection locking clip, and (1) #4-40 tension locking screw (headless). For use with GS-Family Tools. Std. Pkg. Qty.* 10 Blade Replacement Kits KGTSBLD Blade Replacement Kit for GTS, PTS. KGTHBLD Blade Replacement Kit for GTH. K2-BLD2 Blade Replacement Kit for GS2B and PPTS (all versions). K4H-BLD Blade Replacement Kit for GS4H series (3-screw blade guard only). KPPTEHB Blade Replacement Kit for PPTEH series. 1 Gripper Replacement Kits Hand Tool Accessory KPPTEHG KPTSG KST2EHG Gripper Replacement Kit for PPTEH series. Gripper Replacement Kit for PPTS. Gripper Replacement Kit for ST2EH. GHH Specifically designed to hold GTS, and GS (series) or PPTS tools. Used wherever the hand tools are used--construction sites to assembly lines for a convenient and handy place for the tool. 1 1 GHH -- Holster *Order the number of pieces required in multiples of package quantities. Most commonly used parts appear in BOLD. 59 Fully Automatic Cable Tie Installation Systems PAT1M/PAT1.5M Reel-Fed Systems for Miniature Cross Section Cable Ties (18 lb. (80N) minimum loop tensile) * The system consists of the tool head, dispenser, feeder hose and continuously molded, reel-fed cable ties (5000 ties per reel). Each system will install a cable tie in less than one second * Choice of two tool head sizes for bundle diameters up to .82" (21mm) or up to 1.3" (33mm) * The dispenser and hose are designed to operate with either tool head for maximum versatility and economy * The system design permits complete mobility in the use of the tool and location of the dispenser * The system operates on 65 psig (minimum) non-lubricated, filtered air and 100-240 VAC 150 or 60 Hz--Automatically adjusts within this range * Optional bench mount shown on page 61 * Choice of 3 materials Tool Heads Part Number Dispenser Description Std. Pkg. Qty.* PAT1M Tool Head for cable ties up to .82" (21mm) bundle diameter (PLT1M-XMR). 1 PAT1.5M Tool Head for cable ties up to 1.3" (33mm) bundle diameter (PLT1.5M-XMR). 1 * Lightweight, no counter-balance required * Slim, ergonomically designed handle for operator comfort and greater productivity. Reduces potential for repetitive motion injuries * Right or left hand operation * Durable, one-piece cable tie tip collector (for cut-off tips) * Includes tension adjustment * Built-in safety interlock prevents false triggering if anything obstructs jaw path PDM Stationary dispenser for 100 VAC, 120 VAC and 230 VAC. * LCD display monitors performance. If an error occurs an alarm is sounded * On-line HELP menu * Multi-language capability via LCD display (English, Spanish, German, Italian or French) * Cable tie reels are easily loaded into the dispenser, reducing downtime * Audible reload signal when reel is empty * Minimum maintenance required * Power cord included 1 Specifications Pneumatic Electrical * Operates at * 100-240 65 psig VAC minimum * 50 or 60 Hz. * 7 scfm flow * Less than minimum 1 amp * Operates on * Approx. non-lubricated 20 watts air (AVG) Feeder Hose Choose one: PHM1 3.2' (1m) Feeder Hose. 1 PHM2 6.5' (2m) Feeder Hose. 1 PHM3 9.8' (3m) Feeder Hose. 1 * * * * Transfers cable ties and signal from dispenser to tool head Available in three lengths for either tool head Reversible Large electrical connectors for quick, easy and secure connections Other Components 60 Most commonly used parts appear in BOLD. PDH10-37 Air hose from filter/regulator to dispenser/. 9.8' (3m). Includes standard air fittings. 1 PL283N1 Filter/regulator 25 micron (max.) element, 3/8 " ports. 1 Cable Ties for Automatic Installation Systems PATMBM Bench Mount used with PAT1M/PAT1.5M Automatic Systems for Miniature Cross Section Cable Ties (18 lb., 80N minimum loop tensile) For Operations Where the Application is Brought to the Tool * Used with either PAT1M or PAT1.5M tool head * Supplied with a foot-actuated pedal to allow operator to work with both hands * A tool can be installed in the mount in seconds * Supplied with a four-hole base plate * The bench mount operates on 65 psi non-lubricated, filtered air which pilots off of the dispenser In addition to tool head, dispenser, feeder hose and cable ties on reels; order the following: Description Pkg. Qty. Bench mount and foot pedal for PAT1M/PAT1.5M system, four-hole base plate. 1 Part Number PATMBM Cable Ties for PAT1M/PAT1.5M Systems Continuously molded cable ties in sizes, color and material options to meet the application. Part Number Color Max. Bundle Diameter in. (mm) Length in. (mm) Width in. (mm) Min. Loop Tensile Strength Lbs. (N) .100 (2.5) 18 (80) Use with PANDUIT (R) Installation System Nylon 6.6 (for indoor use) up to 185F (85C) * Miniature cross section cable ties * Self-locking * UL Recognized * 5000 ties/reel Reels of 5,000 -- 2 Reels/Carton Cable Ties on Reels PLT1M-XMR Natural PLT1M-XMR1 PLT1M-XMR2 PLT1M-XMR3 PLT1M-XMR4 PLT1M-XMR5 PLT1M-XMR6 PLT1M-XMR7 PLT1M-XMR8 PLT1M-XMR10 Brown Red Orange Yellow Green Blue Purple Gray White PLT1.5M-XMR Natural .82 (21) 4.0 (102) 1.31 (33) 5.6 (142) PAT1M PAT1.5M Weather Resistant Nylon (for outdoor use) up to 185F (85C) PLT1M-XMR0 PLT1.5M-XMR0 Black .82 (21) 4.0 (102) 1.31 (33) 5.6 (142) PAT1M .100 (2.5) 18 (80) PAT1.5M Heat Stabilized Nylon (for indoor use) up to 238F (115C) PLT1M-XMR30 PLT1.5M-XMR30 Black .82 (21) 4.0 (102) 1.31 (33) 5.6 (142) PAT1M .100 (2.5) 18 (80) PAT1.5M Flammability Rating: UL 94V-2, ATB < sec. per ASTM-D635. Most commonly used parts appear in BOLD. 61 Cable Tie Selection and Specification Guidelines Selecting the Proper Cable Tie Material for Your Application By using this information as a guide, the user will be better equipped to select the best suited cable tie and material to perform its intended function over a long period of time. For long life and dependable service, there are many factors to consider when selecting the proper cable tie for each application. Since it is impossible for PANDUIT (R) to provide data on all the various combinations of conditions which may arise, it is suggested that this data be used as a guide. Sample cable ties should be tested under actual end-use conditions to determine the correct cable tie for the application. HALAR** -69 -120 -109 -100 -76 -702 N/A Stainless Steel* TEFZEL*** -60 Weather Resistant Acetal Flame Retardant 6.6 Nylon -300 Weather Resistant Polypropylene Flame Retardant Black 6.6 Nylon -39 Natural Polypropylene Heat Stabilized Natural 6.6 Nylon -30 Weather Resistant Nylon 12 Heat Stabilized Black 6.6 Nylon -0 Heat Stabilized Weather Resistant 6.6 Nylon Weather Resistant 6.6 Nylon Natural 6.6 Nylon To select the optimum cable tie for a specific application, the following table can be used as a quick reference. First, determine the most critical design criteria and then read across the table to find which material is most suitable to meet this need (10 = Most Suitable and 1 = Least Suitable). Next, review the other criteria by scanning in a vertical direction on the chart and then make your final selection. Design Criteria Part Number Suffix Material Designation Loop Tensile Strength 7 7 7 7 7 7 7 6 5 5 7 5 9 10 Low Temperature Service 6 6 6 6 6 5 5 6 6 6 7 7 6 10 High Temperature Service 5 5 6 6 6 5 5] 5 5 5 8 7 3 10 Flammability 6 6 6 6 6 8 8 3 2 2 9 9 2 10 Ultraviolet Resistance 1 6 4 1 6 1 1 7 1 6 9 9 9 10 Radiation Resistance 3 3 3 3 3 3 3 4 5 5 9 9 3 10 Overall Chemical Resistance -Hydrocarbons -Chlorinated Hydrocarbons -Acids -Bases -Salts 6 9 7 2 7 3 6 9 7 2 7 3 6 9 7 2 7 3 6 9 7 2 7 3 6 9 7 2 7 3 6 9 7 2 7 3 6 9 7 2 7 3 8 9 8 6 7 8 8 6 5 9 9 10 8 6 5 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 5 9 8 2 2 4 9 10 10 10 8 9 Low Low Low Low Med. Med. Med. Med. Low Low High High Med. High Relative Price Example No. 1: Application If the application requires high radiation (2 x 108 rads) resistance, excellent resistance to hydrocarbons and the price is not critical. Selection The best choice is TEFZEL*** or stainless steel. The price is higher than other materials, but both have high ratings in resistance to radiation and hydrocarbons. Example No. 2: Application Selection If the application requires a low cost material, good ultraviolet resistance and good resistance to acid rains. The best choice is weather resistant polypropylene. Cost is low; it has a rating of 6 in ultraviolet resistance and a rating of 9 in resistance to acids. 62 Most commonly used parts appear in BOLD. *See page 70 (Table C) for chemical resistance of 304 & 316 stainless steel. ** HALAR is a registered trademark of Solvay Solexis, Inc. *** TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Material Selection Guide To select the proper cable tie for your application, start at the left of the chart and answer the "Yes" and "No" questions until you arrive at the correct material to use. Suggested Material to use No -- Nylon 6.6 No No Material must resist high heat? Yes Material must be resistant to chemicals (salt/acids)? Yes -- Flame Retardant Nylon 6.6 (-69) No -- Heat Stabilized Nylon 6.6 (-30) Material must be flame retardant? Yes --Stainless Steel No -- Natural Polypropylene (-109) No Yes Material must be flame retardant? Material must be flame retardant? Material must resist high heat? No Yes Yes -- Stainless Steel No -- Stainless Steel Material must be flame retardant? Yes -- Stainless Steel START Does material need to be UV resistant? No Yes No Material must resist high heat? Yes Material must be resistant to chemicals (salt/acids)? No -- Weather Resistant Nylon 6.6 (-0) (-00) Weather Resistant Acetal Yes -- Stainless Steel Material must be flame retardant? No -- Weather Resistant Heat Stabilized Nylon 6.6 (-300) Yes -- Stainless Steel No Yes Material must be flame retardant? Material must resist high heat? Yes **HALAR is a registered trademark of Solvay Solexis, Inc. *** TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Material must be flame retardant? No -- Weather Resistant Polypropylene (-100) or Nylon 12 (-120) Yes -- Stainless Steel Material must be flame retardant? No -- Stainless Steel Yes -- Stainless Steel or TEFZEL** (-76) or HALAR* (-702) Most commonly used parts appear in BOLD. 63 Weathering Weathering Ultraviolet light (which is a component of sunlight) attacks, over a period of time, most plastic materials and reduces their properties by breaking the molecular chain. The material breakdown is accompanied by reductions in tensile strength and elongation, increased brittleness, color changes and loss of surface gloss. Carbon black, which is used in PANDUIT (R) nylon and polypropylene cable ties, is one of the most effective stabilizers known today. A uniform dispersion of carbon black provides good ultraviolet light resistance without adversely affecting physical properties. The addition of carbon black, or any other ultraviolet light stabilizer, prolongs the useful life of plastic products used outdoors, but it does not totally eliminate the destructive effects of the light. Some plastics, such as TEFZEL** or HALAR*, are intrinsically very resistant to ultraviolet light and do not require stabilizing additives. Weathering Test Methods In order to monitor the effects of ultraviolet light and the effectiveness of ultraviolet stabilizers, PANDUIT (R), in conformance with industry standards, adopted two methods of weatherability testing: Outdoor Aging and Accelerated Weather Aging. Outdoor Aging The Outdoor Aging method is probably the best and most realistic method of the two. It is conducted in accordance with ASTM D1435 Standard Practice for Outdoor Weathering of Plastics, and allows the material to be affected by not only ultraviolet light, but by all other outdoor elements as well. Although this may more closely approximate an actual application, two drawbacks do exist. The period of time required to produce property decay and material failure may be quite long, and varying adverse chemical environments cannot be tested. Accelerated Weather Aging Accelerated weathering tests are conducted to estimate the rate of degradation due to a combination of ultraviolet light, temperature and moisture. The methods used are in accordance with the following standards: * ASTM D1499, Operating Light and Water Exposure Apparatus (Carbon-Arc type) for exposure to plastics * ASTM G53, Operating Light and Water Exposure (Fluorescent U.V. Condensation type) for exposure of non-metallic materials The condition specified in ASTM D1499 utilizes a carbon arc to simulate natural sunshine and a water spray. The test chamber is operated 20 hrs/day with a two hour cycle of 108 minutes of simulated sunshine and 12 minutes of sunshine and water spray. The temperature of a black body inside the chamber is approximately 63C (145F) during the "Sunshine Only" portion of the cycle. Humidity is not controlled inside the chamber. The test chamber per ASTM G53 uses fluorescent sun lamps to generate ultraviolet light only. A heated water pan produces condensation during a portion of the cycle.The daily cycle is composed of 20 hours of light followed by 4 hours of condensation. Black body temperatures during the light cycle are 50C (122F) and 40C (104F) during the condensation cycle. PANDUIT (R) has also designed a special chamber which is used to simulate the effect of acid rain and ultraviolet light on cable tie materials. The effect of other common chemicals, such as road salt, are also evaluated in this chamber. These methods are effective in quickly determining the ultraviolet light resistance of the various cable tie materials, but it must be emphasized that there are no exact correlations between accelerated aging and actual outdoor exposure. 64 Most commonly used parts appear in BOLD. *HALAR is a registered trademark of Solvay Solexis, Inc. **TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Weathering Material Failure Testing Property decay can lead to three different modes of failure: loss of strength, loss of toughness or change in appearance. The critical mode for any given application would depend upon the application and the requirements it places upon the material itself. Loss of strength is monitored by tensile testing samples of the material before and after it has been weathered. This test will reveal the decreasing strength accompanied by extended weathering. Loss of toughness can be monitored by measuring changes in elongation and impact strength. As ultraviolet light exposure time increases and the material becomes brittle, its elongation and impact strength are greatly reduced. It is important to note that brittle failures can occur even when the tensile strength shows no change. Although change in appearance is normally not a failure mode for cable ties, the plastic does tend to discolor and lose its surface gloss as exposure increases. These changes can be measured by color difference using Adams units which are similar to National Bureau of Standard units. PANDUIT (R) has its own weathering test program to determine estimated life of various cable tie materials.This includes examining many previously aged samples obtained throughout the world. In all cases, the amount of property decay increased with increasing exposure to ultraviolet light. The principal signs of degradation were found to be brittleness, cracking and loss of surface gloss. It was also determined that the time for failure to occur was shorter than indicated from industry tests performed on material samples. This discrepancy is in part due to the fact that cable ties were tested in an end use, stressed condition, while most plastic resin suppliers conduct weathering tests using unstressed test bars. Four cable tie materials (TEFZEL**, HALAR*, Weather Resistant ACETAL and Stainless Steel) have superior ultraviolet light resistance. In tests conducted to date, all have shown no significant signs of degradation. Determining the outdoor life expectancy of any material is difficult since there are other factors, besides ultraviolet light stability, which have to be considered. These factors are listed below and should be considered before specifying a cable tie material. TABLE A -- External Factors Which Affect the Life of a Cable Tie FACTORS Chemicals DECREASED LIFE Applications which have chemicals present can reduce the life. This is the most detrimental factor to the life of a tie. Bundle Diameter As the bundle diameter is reduced, the tie has more bending stress. A thick strap on small diameter has more stress. Loading If the tie is under high loading, this will add additional stress on the tie body. Thickness Vibration Degree of Exposure Moisture Galvanized Metals WEATHERING LIFE EXPECTANCY Materials (P/N Suffix) Natural Polypropylene (-109) Years* 1 Natural Nylon 6.6 1-2 Flame Retardant Black Nylon 6.6 (-60) 1-2 Flame Retardant Nylon 6.6 (-69) 1-2 A thinner tie will have a decreased life since surface cracks will penetrate the thickness of the tie faster. Heat Stabilized Nylon 6.6 (-30) 4-5 Heat Stabilized Natural Nylon 6.6 (-39) 1-2 Applications with high vibrations will cause impact which will propagate any surface cracks. Weather Resistant Nylon 6.6 (-0 & -00) 7-9 No shield or shade, southern exposure, higher altitudes and high temperatures decrease the life of the cable tie. Heat Stabilized Weather Resistant Nylon 6.6 (-300) 7-9 Weather Resistant Polypropylene (-100) 7-9 Dry environments cause nylon 6.6 ties to become more brittle. High humidity plus high temperatures can result in degradation due to hydrolysis in nylon. Weather Resistant Nylon 12 (-120) 12-15 TEFZEL** (-76) >15 HALAR* (-702) >15 Acid rain and acid moisture acting on galvanized metals release chemicals known to attack nylon 6.6. Acetal >20 Stainless Steel (MLT prefix) >30 *Based on assumption of minimum loading, no chemical attack and impact-free conditions. *HALAR is a registered trademark of Solvay Solexis, Inc. **TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Most commonly used parts appear in BOLD. 65 Flammability Flammability A number of test procedures have been developed which can be used for the evaluation and comparison of various materials to support combustion. UL94 Vertical Burning Test Samples of a material, with dimensions 127mm by 12.7mm and the thickness of the intended end use product, are tested in an unaged "as manufactured" state and in an aged state (7 days at 158 F, 70C). The test requires the placement of a precisely controlled flame under a vertically supported specimen for a 10 second period. The flame is removed and the duration of flaming is recorded. If the flame extinguishes, the specimen is immediately subjected to a second 10 second ignition period. Duration of flaming is again recorded. A piece of surgical cotton is placed under the specimen. If drips ignite the cotton, this fact is also recorded. Materials Classed 94V-0 Materials classed 94V-0 shall: * Not have any specimens which burn with flaming combustion for more than 10 seconds after either application of the test flame * Not have a total flaming combustion time exceeding 50 seconds for the 10 flame applications for each set of five specimens * Not have any specimens which burn with flaming or glowing combustion up to the holding clamp * Not have any specimens which drip flaming particles that ignite the dry absorbent surgical cotton located 12" (305mm) below the test specimen * Not have any specimens with glowing combustion which persists for more than 30 seconds after the second removal of the test flame Materials Classed 94V-1 Materials classed 94V-1 shall: * Not have any specimens which burn with flaming combustion for more than 30 seconds after either application of the test flame * Not have a total flaming combustion time exceeding 250 seconds for the 10 flame applications for each set of five specimens * Not have any specimens which burn with flaming or glowing combustion up to the holding clamp * Not have any specimens which drip flaming particles that ignite the dry absorbent surgical cotton located 12" (305mm) below the test specimen * Not have any specimens with glowing combustion which persists for more than 60 seconds after the second removal of the test flame Materials Classed 94V-2 * Not have any specimens which burn with flaming combustion for more than 30 seconds after either application of the test flame * Not have a total flaming combustion time exceeding 250 seconds for the 10 flame applications for each set of five specimens * Not have any specimens which burn with flaming or glowing combustion up to the holding clamp * Be permitted to have specimens that drip flaming particles which burn only briefly, some of which ignite the dry absorbent surgical cotton placed 12" (305mm) below the test specimen * Not have any specimens with glowing combustion which persists for more than 60 seconds after the second removal of the test flame 66 Most commonly used parts appear in BOLD. Flammability ASTM D 635 Samples of a material, with dimensions 125mm by 12.5mm and the thickness of the intended end use product, are tested in an unaged "as manufactured" state. A precisely controlled flame is applied to the specimen and a stopwatch is started. The flame is applied for 30 seconds. The stopwatch is stopped when burning or glowing combustion ceases or when the flame has proceeded to a mark 100mm from the free end. Ten specimens are tested. * Burning Rate * If two or more specimens have burned to the 100mm mark then Average Burning Rate (cm/min.) shall be reported as the average of the burning rates of all specimens which have burned to the 100mm mark * Average Time of Burning and Average Extent of Burning * Average time of burning and average extent of burning of the sample shall be reported if none of ten samples or no more than one of twenty specimens have burned to the 100mm mark * Average Time of Burning (ATB): * Average Extent of Burning (AEB): 10 ATB,s = 0 10 ( t - 30s ) Number of Specimens Rounded to the nearest 5 sec. AEB,mm = (100 - unburned length) 0kjf dsjfs Number of Specimens Rounded to the nearest 5mm Flammability Ratings Materials UL94 ASTM D635 Natural Nylon 6.6 94V-2 (1/16") AEB = 20mm ATB = 5 seconds Weather Resistant Nylon 6.6 (-00) 94V-2 (1/16") AEB = 20mm ATB = 5 seconds Weather Resistant Nylon 6.6 (-0) 94V-2 (1/16") AEB = 20mm ATB = 5 seconds Heat Stabilized Nylon 6.6 (-30) 94V-2 (1/16") AEB = 20mm ATB = 5 seconds Heat Stabilized Natural Nylon 6.6 (-39) 94V-2 (1/16") AEB = 20mm ATB = 5 seconds Heat Stabilized Weather Resistant Nylon 6.6 (-300) 94V-2 (1/16") AEB = 20mm ATB = 5 seconds Flame Retardant Black Nylon 6.6 (-60) 94V-0 (1/64") AEB =15mm ATB < 5 seconds Flame Retardant Nylon 6.6 (-69) 94V-0 (1/64") AEB = 15mm ATB < 5 seconds Weather Resistant Nylon 12 (-120) Not Recognized Ave. Burning Rate 1.6cm/min. Natural Polypropylene (-109) Not Recognized Ave. Burning Rate 2 cm/min. Weather Resistant Polypropylene (-100) 94 HB (.94mm) Ave. Burning Rate 2 cm/min. TEFZEL** (-76) 94V-0(1/16") AEB < 15mm ATB < 5 seconds HALAR* (-702) 94V-0(1/16") AEB = 15 min. ATB < 5 seconds* Weather Resistant ACETAL (DT Series) 94 HB (1.5mm) Ave. Burning Rate 2.8 cm/min. Stainless (MLT prefix) Not Applicable Not Applicable Rating based on 1/8" thick test samples *HALAR is a registered trademark of Solvay Solexis, Inc. **TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Most commonly used parts appear in BOLD. 67 Radiation/Moisture/Temperature/Tensile Strength Radiation Installed cable ties of various materials have been exposed to different amounts of radiation to determine the maximum acceptable limit. These tests were conducted by PANDUIT (R) mainly to determine the acceptability for use in various areas of nuclear power plants (accumulated over 40 year life). See Table B (page 69) for radiation resistance rating. Moisture Many plastics when exposed to high relative humidity absorb water and, as such, the tensile strength of the material can change dramatically. Nylon 6.6 when exposed to 100% relative humidity, will absorb as much as 8.5% water which will reduce tensile strength by 50% when compared to a dry cable tie. Polypropylene, HALAR*, Type 12 Nylon, TEFZEL** and ACETAL are low water absorbing materials and, as such, the effect of water is minimal. See Table B (page 69) for moisture absorption. Temperature Plastic materials normally undergo property loss during exposure to high temperature due to oxidation. The Maximum Continuous Use Temperature for cable tie materials depends upon the time at the elevated temperature as well as other environmental conditions. Initially, plastics become more flexible and weaker when exposed to high temperatures. After a period of time, oxidation may occur which will cause embrittlement, making plastic cable ties more susceptible to failure from impact and vibration. The Maximum Continuous Use Temperature, otherwise known as the Relative Thermal Index (mechanical without impact) is determined per UL746B. It is one indicator of a materials ability to retain a particular physical property when exposed to elevated temperatures over an extended period of time. It is based on the assumption that there is no loading, no chemical attack and impact free condition. The Maximum Continuous Use Temperatures for cable tie materials are listed in Table B (see page 69). Low temperature exposure will also make most plastics more brittle during the exposure, but little property loss occurs when the material is returned to room temperatures. The Minimum Continuous Use Temperatures for cable tie materials are listed in Table B (see page 69). Tensile Strength Most cable ties are selected based on material, length and minimum loop tensile strength. Minimum loop tensile strength was established under SAE Aerospace Standard AS23190. Each cross section cable tie (Miniature-M, Intermediate-I, Standard-S, Heavy-H and Extra Heavy-EH) has a different loop tensile strength when tested per AS23190. The cable tie is first conditioned at 49C (120F), 20% relative humidity for 24 hours, then the cable tie is installed on a split mandrel and the halves of the mandrel separated at a rate of 1" (25.4mm) per minute (Fig.1). The separating force required to unlock or break the cable tie is the loop tensile strength. Loop tensile strength is dependent both on the locking design and the tensile strength (psi) of the material. As an example, the tensile strength of polypropylene material is approximately 1/2 to 1/3 of nylon 6.6; thus the loop tensile strength of a given cross section tie made of polypropylene would be much less than a tie made of nylon 6.6. This is another property to be considered when selecting a cable tie. The various representative loop tensile strengths are listed in Table B (page 69). 68 Most commonly used parts appear in BOLD. Fig. 1 *HALAR is a registered trademark of Solvay Solexis, Inc. **TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Physical Characteristics of Cable Tie Materials -109 -100 -76 -702 Stainless Steel -120 Weather Resistant Acetal -69 HALAR* -60 TEFZEL** -300 Weather Resistant Polypropylene Flame Retardant 6.6 Nylon -39 Natural Polypropylene Flame Retardant Black 6.6 Nylon -30 Weather Resistant Nylon 12 Heat Stabilized Weather Resistant 6.6 Nylon -0 and -00 Heat Stabilized Natural 6.6 Nylon None Heat Stabilized Black 6.6 Nylon Natural 6.6 Nylon Design Criteria Part Number Suffix/ Material Designation Weather Resistant 6.6 Nylon TABLE B N/A N/A Tensile Strength 73F (psi) 12,000 12,000 12,000 12,000 12,000 12,000 12,000 8,100 4,100 4,100 7,500 7,000 6,500 (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 2) Color Natural Black Black Natural Black Black 28 28 26 26 26 34 34 NA NA NA 30 60 NA NA 1 x 105 Rads 1 x 105 Rads 1 x 105 Rads 1 x 105 Rads 1 x 105 Rads 1 x 105 Rads 1 x 105 Rads 3.5 x 106 Rads 1 x 106 Rads 1 x 106 Rads 2 x 10 8 Rads 2 x 108 Rads 6 x 105 Rads 2 x 108 Rads Water Absorption (24 hours) 1.2% 1.2% 1.2% 1.2% 1.2% 1.1% 1.1% 0.3% 0.1% 0.1% <0.03% <0.05% <0.45% None Ultraviolet Light Resistance Poor Good Fair Poor Good Poor Poor Good Poor Good Very Good Very Good Max. Continuous Use Temperature (Note 4) 185F 85C 185F 85C 239F 115C 239F 115C 212F 100 C (Note 5) 212F 100 C 212F 100 C 194F 90C 238F 115C 238F 115C 338F 170C 302F 150C 185F 85C 1000 F 537C (Note 6) Min. Continuous Use Temperature (Note 7) -40 F -40C -40 F -40C -40 F -40C -40 F -40C -40 F -40C -40 F -40C -40 F -40C -40F -40C -40F -40C -40F -40C -50F -46C -50F -46C -40F -40C -112F -80 C 12 lb. 18 lb. 40 lb. 12 lb. 18 lb. 40 lb. N/A 18 lb. 40 lb. N/A 18 lb. 40 lb. N/A 18 lb. 30 lb. N/A 18 lb. 30 lb. N/A 18 lb. 40 lb. N/A N/A 25 lb. N/A 12 lb. N/A N/A 12 lb. N/A N/A 18 lb. 25 lb. N/A 18 lb. N/A N/A N/A N/A N/A N/A N/A 50 lb. 85 lb. 120/ 175 lb. 250 lb. 50 lb. 85 lb. 120/ 175 lb. 250 lb. 50 lb. N/A 120/ 175 lb. 250 lb. 50 lb. N/A 120/ 175 lb. 250 lb. 50 lb. N/A 120 lb. 50 lb. N/A 120 lb. 50 lb. N/A 120 lb. 40 lb. N/A 90 lb. 30 lb. N/A 50 lb. 30 lb. N/A 50 lb. 50 lb. N/A 120 lb. 50 lb. N/A N/A N/A N/A N/A 100 lb. N/A 250 lb. N/A N/A N/A N/A 90 lb. 90 lb. N/A N/A 250 lb. N/A 600 lb. GTS GTS GTS GTH GTH GTH GS4H GS4H GS4H GS4EH GS4EH STS2 STS2 STS2 STH2 STH2 STH2 ST2EH ST2EH ST2EH STHV STHV STHV PTS PTS PTS PPTS PPTS PPTS PPTEH PPTEH PPTEH GTS GTH GS4H STS2 STH2 ST2EH STHV PTS PPTS PPTEH GTS GTH GS4H STS2 STH2 ST2EH STHV PTS PPTS PPTEH GTS GTH GS4H STS2 STH2 ST2EH STHV PTS PPTS PPTEH GTS GTH GS4H STS2 STH2 ST2EH STHV PTS PPTS PPTEH GTS GTH GS4H STS2 STH2 STHV PTS PPTS GTS GTH GS4H STS2 STH2 PTS PPTS GTS GTH GS4H STS2 STH2 PTS PPTS GTS GTH GS4H STS2 STH2 PTS PPTS GTS GTH GS4H STS2 STH2 PTS PPTS GTH GS4H GS4EH ST2EH GS4MT ST2MT PPTMT HTMT UL Flammability Oxygen Index Radiation Resistance Submin. Min. Int. Minimum Loop Tensile Std. Strength Hvy.-Std. @120 F Hvy. 20% RH EH DH Tool Installed Ivory Black Green Black Aqua Maroon Black 90,000 (Note 3) Stainless See Page 66 Excellent Excellent NOTE 1: ASTM D638 NOTE 2: Telcordia TR-TSY-000789 NOTE 3: ASTM E8 NOTE 4: See page 68 -- Temperature NOTE 5:Estimated NOTE 6: (-321) goes to 1700 (923C) NOTE 7: After installation *HALAR is a registered trademark of Solvay Solexis, Inc. **TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Most commonly used parts appear in BOLD. 69 Chemical Resistance TABLE C Chemical Resistance Many factors combine to determine the useful life of a cable tie material and none is as important as chemical exposure. Various chemicals will have different effects on plastics depending on such things as chemical concentrations, temperature, stress and ultraviolet light. Table C is an excellent guideline for the selection of the best cable tie material. It should be noted that the exposure temperature for this chemical resistance chart is 70F. Resistance of PANDUIT (R) Cable Tie Materials to Chemical Attack at 70F -- = Not Tested E = Excellent S = Satisfactory B = Slight Attack U = Attacked 2 Percent Concentration * Nylon 6.6 Nylon 12 Polypropylene TEFZEL*** Acetaldehyde 90 S -- B E Acetic Acid 97 U U E E Acentic Acid 10 B S E E E E E Acetic Anyhdride 90 -- S E E E E E Acetone 100 E E E E E E E Acetophenone 100 -- -- S E E E E Acetylene 100 -- -- E E E E E Aluminum Chloride 10 S E E E E U B Aluminum Fluoride 10 S E E E E U B Aq. C.S. -- E E E E E E Aluminum Potassium Sulfate 10 S E E E E E1 E Ammonia All -- E E E E E E E Agent Aluminum Hydroxide Ammonium Carbonate HALAR** 304 Stainless Steel 316 Stainless Steel E -- -- E E E 1 to 5 -- E -- E E E 10 to 25 U E E E E E1 E Ammonium Hydroxide 10 E -- -- E E -- -- Ammonium Nitrate 100 -- E E E E E E Ammonium Sulfate 10 -- E E E E E1 E1 Ammonium Chloride Amyl Acetate 100 -- -- B E E E E Aniline 100 -- S E E E E E Antimony Trichloride All U -- E E E E E 1 to 80 -- -- E E E E E Barium Carbonate All -- E E E E E E Barium Chloride All -- E E E E E1 E Barium Sulfate All -- E E E E E E Barium Sulfide All -- E E E E E E Benzene 100 E E B E E E E Benzoic Acid 100 U E E E E E E Benzoyl Chloride 100 -- -- B E E -- -- Benzyl Alcohol 100 -- -- E E E -- -- Boric Acid All U E E E E S -- U Arsenic Acid Bromine 100 U U U E E U Butadiene 100 -- -- B E E E E Butane 100 -- E E E E E E Butanediol 100 -- -- E E E -- -- Butyl Acetate 100 -- E B E E -- -- N. Butyl Alcohol 100 -- E E E E E E Butyl Phthalate 100 -- -- E E E -- -- -- Butyraldehyde 70 (NOTE 1) = Pitting occurs under some conditions (NOTE 2) = Attack may occur if sulfuric acid present Aq. = Aqueous C.S. = Cold Saturated 1 100 -- -- E E E -- Butyric Acid 10 to 100 U -- E E E E E Calcium Carbonate Aq. C.S. -- -- E E E E E Calcium Chlorate Aq. C.S. -- -- E E E E E Calcium Chloride 5 B E E E E E1 E1 Most commonly used parts appear in BOLD. *Includes all 6.6 Nylons (such as Weather Resistant, Heat Stabilized and Flame Retardant). **HALAR is a registered trademark of Solvay Solexis, Inc. ***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Chemical Resistance Table C -- (cont.) Resistance of PANDUIT (R) Cable Tie Materials to Chemical Attack at 70F Percent Concentration * Nylon 6.6 Nylon 12 Polypropylene TEFZEL*** Calcium Hydroxide 50 -- -- E E E E E Calcium Hypochlorite 2 U -- E E E E1 E1 Calcium Nitrate 50 -- E E E E -- -- Calcium Sulfate 2 B -- E E E E E Carbon Tetrachloride 100 E E U E E E E Carbon Tetrachloride Aq. 10 -- -- -- -- E B1 E1 Chlorine Dry -- U U E E B B Chlorine Wet -- U B E E U U 10 to 50 U -- E E E U B 100 -- B E E E -- -- Agent Chloroacetic Acid Chlorobenzene Chloroform HALAR** 304 Stainless Steel 316 Stainless Steel 100 E B B E E E E Chlorosulphonic Acid 10 to 100 U U U S E U U Chromic Acid 10 to 50 U U E E E B B Citric Acid 10 to 50 S S E -- E E E Copper Chloride 1 to 10 U -- E E E E1 to U E1 to B1 Copper Cyanide Aq. C.S. -- -- E E E E E Copper Nitrate 50 -- -- E E E E E Cresol 100 U U -- E E E E Crotonaldehyde 100 -- -- E E E -- -- Cyclohexane 100 -- E B E E E -- Cyclohexanol 100 -- E E E E E -- Cyclohexanone 100 -- E B E E E -- Dibutyl Phthalate 100 -- -- E E E -- -- Dichloroethane 100 -- -- E -- E E E Dichloroethylene 100 -- -- B E E -- -- Diesel Fuel 100 -- E B E E E E Diethyl Ether 100 -- E E E E E E Diglycolic Acid Aq.C.S. -- -- E E E -- -- Disobutyl Ketone 100 -- -- E E E -- -- Dimethyl Amine 100 -- -- E E E -- -- Dimethyl Formamide 100 -- E E E E E -- Dimethyl Sulfate 100 -- -- B E E -- -- Dioctyl Phthalate 100 -- -- E E E E -- 1, 4-Dioxane 100 -- S B E E E -- Ethyl Acetate 100 E E S E E E E Ethyl Alcohol 100 E E E E E E E Ethyl Chroride 100 -- -- B E E E E Ethylene Chloride 100 E B B E E E E Ethylene Glycol 100 E E E E E E E Ethylene Oxide 100 -- -- B E E -- -- Fatty Acids 100 -- -- E E E -- -- Ferric Chloride 50 U -- E E E U U Ferric Hydroxide All -- -- E E E E E Ferric Nitrate All -- -- E E E E E Aq. C.S. U -- E E E U B Ferrous Sulfate 10 -- -- E E E E1 E Fluorine (Dry) 100 -- -- U E -- U U E Ferrous Chloride Formaldehyde 40 E S E E E E1 Formic Acid All U U E E E E E Freons 100 E -- -- E E -- -- Fuel Oil 100 -- E -- E E E E Furfural 100 E -- -- E E E E E Gallic Acid Aq. C.S. -- -- -- E E E Gasoline 100 E -- B E E E E Glycerin 100 -- E E -- E E E *Includes all 6.6 Nylons (such as Weather Resistant, Heat Stabilized and Flame Retardant). **HALAR is a registered trademark of Solvay Solexis, Inc. ***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Most commonly used parts appear in BOLD. 71 Chemical Resistance Table C -- (cont.) Resistance of PANDUIT (R) Cable Tie Materials to Chemical Attack at 70F Percent Concentration * Nylon 6.6 Nylon 12 Polypropylene TEFZEL*** Glycolic Acidb 40 U -- E E Heptane 100 -- E E E Hexane 100 -- E E E E E E Hydrobromic Acid All U U E E E U U U Agent HALAR** 304 Stainless Steel 316 Stainless Steel E -- -- E E E Hydrochloric Acid All U U E E E U Hydrocyanic Acid All -- U E E E B B Hydrofluoric Acid All U U E E E U U Hydrofluorosiliac Acid 30 -- U E E E U U Hydrogen Peroxide 30 U S S E E S E Hydrogen Sulfide Dry -- -- E E E E E Hydrogen Sulfide Wet U -- E E E B2 E2 Hydroquinone 100 -- -- E E E -- -- Iodine 100 -- -- E E E U U Iodoform 100 -- -- -- E E E E Isopropyl Alcohol 100 E E E E E E E Jet Fuel 100 E -- E E E E E Lactic Acid 10 E S E E E E E Lanolin 10 E E E E E E E Aq. C.S. -- -- E E E E E 100 E E E E E E E Magnesium Carbonate Aq. C.S. -- E E E E E E Magnesium Chloride Aq. C.S. B E E E E E1 E1 Magnesium Nitrate Lead Acetate Linseed Oil Aq. C.S. -- E E E E E E Maleic Acid 100 -- -- E E E -- -- Malic Acid Aq. C.S. -- -- E E E E E Dilute -- E E E E U U Mercury 100 -- E E E E E E Methyl Alcohol 100 E E E E E E E Methyl Bromide 100 -- -- U E E -- -- Methyl Chloride 100 -- -- B E E -- E Methyl Chloroform 100 E -- B E E -- -- Methyl Ethyl Ketone 100 -- E B E E E E Methyl Isobutyl Ketone 100 E -- B E E E E Methylene Chloride 100 B U B E E E E Naptha 100 -- -- E E E E E Mercuric Chloride Naphthalene 100 -- S E E E E E Nickel Chloride Aq. C.S. -- E E E E E1 E1 Nickel Sulfate Aq. C.S. -- E E E E E1 E1 Nitric Acid 10 to 30 U U E E E E E Nitric Acid 30 to 68 U U U S E E E Nitro Benzene 100 -- B B E E E E Nitro Methane 100 E -- -- E E -- -- 5 -- -- -- E E E E Oleic Acid 100 -- B E E E E E Oxalic Acid 10 -- B E E E E E Oxygen All -- -- E E E -- -- Paraffin 100 E E E E E E E Perchlorethylene 100 -- -- B E E E E Petroleum Ether 100 -- E E E E E E Phenol 90 U U E E E E E Phosphoric Acid 10 U U E E E E E Phosphorus Pentoxide 100 -- U E E E -- -- Phosphorus Trichloride 100 -- U B E E E E Phthalic Acid 50 -- -- B E E E E Pictic Acid 1 -- -- E E E E E Nitrous Acid 72 Most commonly used parts appear in BOLD. *Includes all 6.6 Nylons (such as Weather Resistant, Heat Stabilized and Flame Retardant). **HALAR is a registered trademark of Solvay Solexis, Inc. ***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Chemical Resistance Table C -- (cont.) Resistance of PANDUIT (R) Cable Tie Materials to Chemical Attack at 70F Percent Concentration * Nylon 6.6 Nylon 12 Polypropylene TEFZEL*** 1 -- -- E E E -- -- Potassium Bromide Aq. C.S. -- -- E E E E1 E1 Potassium Carbonate Aq. C.S. -- B E E E E E Potassium Chlorate Aq. C.S. -- S E E E E E Potassium Chloride 5 -- E E E E E1 E1 Agent Potassium Borate Potassium Dichromate Potassium Ferrocyanide Potassium Hydroxide HALAR** 304 Stainless Steel 316 Stainless Steel Aq. C.S. -- U E E E E E 25 -- -- E E E E E 30 B -- E E E B B Potassium Iodide Aq. C.S. -- E E -- E E E Potassium Nitrate Aq. C.S. -- E E E E E E 1 -- -- E E E -- -- Potassium Perchlorate Potassium Permanganate 5 U U E E E E E Potassium Persulfate All -- -- E E E -- -- Potassium Sulfate Aq. C.S. -- E E E E E E Potassium Sulfide Aq. C.S. -- -- E E E E E 50 -- -- E E E -- -- E Propionic Acid Propyl Alcohol 100 E -- E E E E Pyridine 100 -- E B E E B B Sea Water 100 -- E E E E E1 E Aq. C.S. -- E E E E U U 10 -- E E E E E E Aq. C.S. E -- E E E E1 E Sodium Benzoate Aq. C.S. -- -- E E E -- -- Sodium Bicarbonate Aq. C. S. E E E E E E E Sodium Bisulfate 10 -- -- E E E E E Sodium Bisulfite Aq. C.S. -- S E E E E E Sodium Borate Silver Chloride Silver Nitrate Sodium Acetate Aq. C.S. -- -- E E E E E Sodium Carbonate 2 E E E E E E E Sodium Chlorate 25 -- B E E E E E Sodium Chloride 10 E E E E E E1 E1 Sodium Chromate Aq. C.S. U -- E E E E E Sodium Fluoride 5 -- -- E E E E1 E1 Sodium Hydroxide 10 E E E E E E E Sodium Hypochlorite 5 S B E E E B1 E1 Sodium Hyposulfite E Aq. C.S. -- -- -- E E E Sodium Nitrate 5 E E E E E E E Sodium Nitrite Aq. C.S. -- B E E E E E Sodium Perborate Aq. C.S. -- S E E E -- B Sodium Perchlorate 10 -- -- -- E E E E Sodium Phosphate 5 -- E E E E E E Sodium Sulfate 5 -- E E E E E E Sodium Sulfide 5 -- E E E E E1 E Sodium Thiosulfate 25 -- E E E E E2 E2 Stannic Chloride Aq. C.S. U -- E E E U B Stannous Chloride Aq. C.S. -- E E E E B S Stearic Acid 100 -- B E E E E E Succinic Acid 100 -- S E E E -- -- Sulfur 100 -- E E E E S B Sulfer Dioxide All U -- B E E E E Sulfuric Acid 5 U B E E E B E Sulfuric Acid 50 U U E E E U B Sulfuric Acid Concentrate U U B E E B B *Includes all 6.6 Nylons (such as Weather Resistant, Heat Stabilized and Flame Retardant). **HALAR is a registered trademark of Solvay Solexis, Inc. ***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Most commonly used parts appear in BOLD. 73 Chemical Resistance Table C -- (cont.) Resistance of PANDUIT (R) Cable Tie Materials to Chemical Attack at 70F Agent Sulfurous Acid Percent Concentration * Nylon 6.6 Nylon 12 Polypropylene TEFZEL*** 10 E -- E E HALAR** 304 Stainless Steel 316 Stainless Steel E B1 E1 Tannic Acid 10 -- E E E E E E Tartaric Acid 50 -- S E E E E E Tetrahydrofuran 100 -- B B E E E E Toluene 100 E E B E E E E Trichloroacetic Acid 10 U -- S E E U U Trichloroethylene 100 -- U B E E E1 E1 Turpentine 100 -- S U E E E E Urea 50 -- E E E E -- -- Vinyl Acetate 100 -- -- E E E -- -- Xylene 100 E -- U E E E E Zinc Chloride 70 U E E E E E E Zinc Nitrate Aq. C.S. -- E E E E E E Zinc Sulfate Aq. C.S. -- E E E E E E 74 Most commonly used parts appear in BOLD. *Includes all 6.6 Nylons (such as Weather Resistant, Heat Stabilized and Flame Retardant). **HALAR is a registered trademark of Solvay Solexis, Inc. ***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. Quality The owner-operator concept makes employees responsible for their areas of the manufacturing process. PANDUIT (R) Total Quality Assurance (TQA) initiative spans more than two decades. During that time we have furnished quality training to all levels of our employees, enabling them to participate in our Excellence Through Quality (ETQ) program of continuous quality improvement. Our quality policies and major improvement projects are chosen and monitored by the Corporate Process Improvement Committee. This group is comprised of the top management representatives from each of PANDUIT (R) business segments. Operator inspection is an important PANDUIT (R) TQA procedure. PANDUIT (R) Engineering and Manufacturing groups work together to design quality into the products and the production processess. Service quality is equally important and our customer service group takes the lead in assuring superior performance from the supporting departments. Our high degree of product and service quality is due in part to heavy investment in technology by PANDUIT (R). However, people are really the foundation for our quality achievements. We believe in Quality at the Source. By introducing Quality at the Source throughout the company, we have provided the training, supplied the necessary equipment and moved the responsibility for performance to the employees doing the work. Their pride in product and service is demonstrated every day in how we serve our customers. PANDUIT (R) ISO 9001 and QS-9000 registrations serve notice to our customers that we support their business through our reliable quality systems. When necessary to meet the needs of specific industries, we incorporate additional quality requirements in our systems. At PANDUIT (R), our commitment is Total Quality Assurance. Members of ETQ Teams search for ways to improve product quality. Most commonly used parts appear in BOLD. 75 Merchandising PANDUIT (R) Products are on Display at Your Local PANDUIT (R) Distributor Your local PANDUIT (R) Distributor carries top quality PANDUIT (R) products and offers many advantages and services to help lower your transaction costs: * Local stock for fast delivery and "Just-InTime" requirements. Reduces your inventory costs. 76 Most commonly used parts appear in BOLD. * One stop for all your electrical needs because he stocks products from many manufacturers. One purchase order, less administrative and freight costs. * Well trained personnel to answer any questions and to make sure you have the right product for the right job. Stainless Steel Cable Ties and Accessories PAN-STEEL(R) Self-Locking Stainless Steel Ties PANDUIT (R) NO-S LIP TM line of Stainless Steel Self-Locking Ties have a unique low-insertion force head design that keeps the tie locked, before or after tightening, regardless of its orientation or how tightly it is installed. With features like high strength, corrosion resistance, extreme temperature tolerance, fully rounded edges and special styles, these stainless steel ties are an excellent choice for a wide variety of applications and are designed to install easily for long service life under adverse conditions. All ties can be installed using PANDUIT (R) standard installation tools, or simply installed by hand. Ties -- Standard Sizes Standard, Light Heavy and Heavy Banding System * Fully rounded edge design eliminates sharp edges for added protection and safety * Available in a loop tensile strength of 200 lbs. for standard cross-section ties, 250 lbs. for light heavy cross section ties and 450 lbs. for heavy cross section ties * Superior strength for most bundling applications * Available in type 304 and 316 stainless steel which provides excellent resistance to temperature extremes, corrosion, weather and UV radiation * For applications that require bundling various bundle diameters * Provides versatility on job sites for any diameter with minimum inventory * 304 Stainless Steel (316 available) WAVE-TY TM Superior Grip Steel Ties * Loop tensile strength of 450 lbs. Provides superior strength for increased performance and reliability * Available in 304 and 316 stainless steel * The unique wave-form spring maintains a high tension grip on non-resilient objects; provides the strength of steel and the high tension of a steel spring Coated Stainless Steel Ties Part Number MLT1S-CP MLT2S-CP MLT2.7S-CP MLT4S-CP MLT6S-CP MLT8S-CP MLT2LH-LP MLT4LH-LP MLT6LH-LP MLT8LH-LP MLT2H-LP MLT4H-LP MLT6H-LP MLT8H-LP MLT10H-LP MLT12H-Q Max. Bundle Dia. In. (mm) 1.00 (25) 2.00 (51) 2.70 (69) 4.00 (102) 6.00 (152) 8.00 (203) 2.00 (51) 4.00 (102) 6.00 (152) 8.00 (203) 2.00 (51) 4.00 (102) 6.00 (152) 8.00 (203) 10.00 (254) 12.00 (305) Length In. (mm) 5.0 (127) 7.9 (201) 10.2 (259) 14.3 (362) 20.5 (521) 26.8 (679) 7.9 (201) 14.3 (362) 20.5 (521) 26.8 (679) 7.9 (201) 14.3 (362) 20.5 (521) 26.8 (679) 33.0 (838) 42.0 (1067) Width In. (mm) Min. Loop Tensile Strength Lbs. (N) .18 (4.6) 200 (890) .25 (6.4) 250 (1112) .31 (7.9) 450 (2000) .18 (4.6) 100 (445) .31 (7.9) .18 (4.6) .31 (7.9) Std. Pkg. Qty.* 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 25 Std. Ctn. Qty. 500 500 500 500 500 500 250 250 250 250 250 250 250 250 250 125 250 (1112) 1 1 1 1 n/a n/a n/a n/a 100 (445) 250 (1112) 100 100 1000 1000 50 250 50 250 50 250 50 250 50 250 50 50 50 50 50 250 250 250 250 250 CUSTOM LENGTH BANDING SYSTEM MBS-TLR MBS-MR MBH-TLR MBH-MR Any Any 250' 1000' 250' 1000' (76m) (305m) (76m) (305m) BANDING HEADS MTHS-C MTHH-C n/a n/a n/a n/a *Order the number of reels required in multiples of standard package quantities. WAVE -TY TM MLT2.7WH-LP MLT4WH-LP MLT6WH-LP MLT8WH-LP MLT10WH-LP 2.70 (69) 4.00 (102) 6.00 (152) 8.00 (203) 10.00 (254) 10.2 (259) 14.2 (360) 20.4 (520) 26.8 (679) 33.0 (838) .31 (7.9) 450 (2000) *Order the number of ties required in multiples of standard package quantities. NYLON 11 COATED 316 STAINLESS STEEL MLTC2H-LP316 2.00 (50) MLTC4H-LP316 4.00 (102) * For communication and MLTC6H-LP316 6.00 (152) electrical cable 8.00 (203) * The strength of steel, the MLTC8H-LP316 MLTC10H-LP316 10.00 (254) protection of nylon; the nylon coating provides fully rounded plastic edges to protect cables * Available with a loop tensile strength of 250 lbs. * Base metal is 316 grade stainless steel for excellent resistance to temperature extremes, corrosion, weather, chemicals, salt sprays and UV radiation 7.9 (201) 14.2 (360) 20.4 (520) 26.8 (679) 33.0 (838) .31 (7.9) 250 (1112) For more complete information on Stainless Steel Products, see PANDUIT (R) Brochure SA-SSCB01. Most commonly used parts appear in BOLD. 77 Stainless Steel Mounts and Marking Products Installation Tools * Complete line of manual and pneumatic installation tools speeds installation * Side-entry of cable ties into the tools, makes for quick and easy installation * Automatic tension and cut-off capabilities available on select models * High reliability, low maintenance, long life Part Number Std. Pkg. Qty.* Description PPTMT Pneumatic-operated, tool controlled tension and cut-off for production applications. 1 GS4MT MIL approved. Hand-operated, tool controlled tension and cut-off. 1 K4M-BLD Replacement cutter blade for GS4MT. 1 K4MTG Replacement tension gripper for GS4MT. 1 ST2MT Hand-operated, installer controlled tension and cut-off. 1 KT2MG Replacement tension gripper for ST2MT. 1 HTMT Used to tension and coil the tail of tie. 1 *Order the number of tools required in multiples of standard package quantities. PAN-STEEL(R) Accessories Cushion Sleeve * Makes rigid bundles resilient, provides tighter tensioning * Non-conductive insulator between clamp and bundle * Material: black, neoprene Part Number For Clamp Width In. mm Sleeve Width In. (mm) PCSS-B-CR .18 (4.6) .33 (8.4) 1 -- PCSH-B-CR .31 (7.9) .47 (12) 1 -- Std. Pkg. Qty.* Std. Ctn. Qty. Bulk Pkg. -CR = 100' reel *Order the number of reels required in multiples of standard package quantities. Stainless Steel Mounts Mount * Low profile * Utilizes only one hole for mounting * Material: 304 Stainless Steel Part Number MTM1H-C Push-Button Mount MBM-H25-Q Mounting Method Hole Diameter In. (mm) Std. Pkg. Qty.* Std. Ctn. Qty. #8 (4) Screw .18 (4.6) 100 1000 #10 (5) Screw .21 (5.4) 100 1000 MTM1H25-C .18 (4.6) thru .31 (7.9) 1/4" (6) Screw .28 (7.1) 100 1000 Part Number For MLT Tie Width In. (mm) Mounting Method In. (mm) Panel Thickness In. (mm) Std. Pkg. Qty.* Std. Ctn. Qty. MPWM-H56 .18 (4.6) thru .31 (7.9) Inserted into pre-drilled hole 5/16 (8) .031 (.8).094 (2.4) 25 250 MBM-H25-Q .18 (4.6) Inserted into pre-drilled hole .250 (6.4) .031 (.8).125 (3.2) 25 250 MTM2H-Q .18 (4.6) thru .31 (7.9) #8 (4) Screw -- 25 250 MTMBH-Q .18 (4.6) thru .31 (7.9) Pre-drill hole size Max. size .625 (15.9) Up to .500 max. (12.7) 25 250 MTM1H10-C Stainless Mount MTM1H-C Push-Wing Mount MPWM-H56-Q For MLT Tie Width In (mm) Material: 304 Stainless Steel *Order the number of pieces required in multiples of standard package quantities. Two-Way Mount MTM2H-Q Bulkhead Mount MTMBH-Q Stainless Steel Marking Products Use PAN -S TEEL (R) Ties or Stainless Steel Strapping to provide identification in harsh environments. The ties and strapping can be stamped with available tooling or custom stamped upon request. Marker plates and metal embossed tape are also available. Marker Plates and Tags 78 * Attached with PAN-STEEL (R) T ies * 304, 316 stainless steel, brass and aluminum available * Can be used as a flag or wrap * Various sizes and shapes available; round, square, rectangular, etc. Part numbers available upon request * Can be custom marked by PANDUIT (R) . See page 79 for details Used with Clamp/Tie Width In. (mm) Width MMP350-C .18 (4.6) .75 (19) MMP350W38-C .18 (4.6) .18 (4.6) thru .31 (7.9) Part Number MMP350H-C Size - In. (mm) Length Std. Pkg. Qty.* Std. Ctn. Qty. 3.50 (89) 100 1000 .38 (10) 3.50 (89) 100 1000 .75 (19) 3.50 (89) 100 1000 *Order the number of pieces required in multiples of standard package quantities. For more complete information on Stainless Steel Products, see PANDUIT (R) Brochure SA-SSCB01. Most commonly used parts appear in BOLD. Stainless Steel Marking Products Metal Embossed Tape System * Hand operated embosser with 3/16" height characters (approx. 6 characters/inch) * Hole punch (3/16" dia.) allows tape to be used as a wrap or flag marker, held on with PAN-STEEL (R) Ties Characters include: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 2 3 4 5 6 7 8 9 . / - Std. Pkg. Qty.* Std. Ctn. Qty. Embosser, carrying case, (1) roll each of META and METS4 tape. 1 -- META-X 1/2" x 16'. roll Aluminum tape. 10 50 METS3-X 1/2" x 21' roll Stainless Steel (316 Grade). 10 50 METS4-X 1/2" x 21' roll Stainless Steel (304 Grade). 10 50 Part Number MEHT Description TAPE *Order the number of pieces required in multiples of standard package quantities. 3/8" height (approx. 6 characters per inch). Indenter Press * For medium volume marking of ties, strapping or plates * Manual operation with automatic indexing * Interchangeable character wheel makes the press versatile and economical * Press includes fixturing device to provide high quality marking Characters include: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z & 1 2 3 4 5 6 7 8 9 0 . / - Part Number Description Std. Pkg. Qty.* IMP094 IMP125 IMP187 Press with 3/32" character wheel. Press with 1/8" character wheel. Press with 3/16" character wheel. 1 1 1 MWK094 MWK125 MWK187 3/32" character wheel kit. 1/8" character wheel kit. 3/16" character wheel kit. 1 1 1 IMP-FIX Interchangeable fixture for MMP172 series. MT series and the aluminum marker plates. 1 *Order the number of pieces required in multiples of standard package quantities. Custom Marking Capabilities on PANDUIT (R) P AN-STEEL(R) Stainless Steel Cable Ties, Strapping, Metal Marker Plates/Tags Anodized Aluminum Locks.* PANDUIT (R) stainless steel cable ties, strapping, stainless steel, brass and aluminum marker plates/tags and anodized aluminum locks can be custom marked for identification of equipment, cables, hoses, pipes, conduit, etc. in petrochemical plants, power plants, pulp and paper mills, breweries, and many other applications. PANDUIT (R) in-house computer controlled custom marking systems provide sharp, crisp, high quality legends. Sequential numbering for serialization is available. *Anodized aluminum locks can only be marked by the laser system. Laser Marking System: Embossing System: * Used on all stainless steel cable ties, strapping, metal marker plates/tags and anodized aluminum locks * Graphics capability and BOLD block letters * Upper and lower case character capability * Alphanumeric and sequential numbering ability * Used on metal marker plates and tags which are a maximum of .020" (0.5mm) thick * Excellent for applications that are exposed to occasional painting and excessive dirt * Upper case "raised" character capability only * Alphanumeric and sequential numbering ability Character Sizes ** Available: * 1/8" (3.18mm) * 1/4" (6.35mm) * 3/16" (4.77mm) * 5/16" (7.94mm) * 1/2" (12.7mm) Character Sizes ** Available: * 1/8" (3.18mm) * 3/16" (4.77mm) **Other character sizes available. For complete product information, specification or character information, contact 866-405-6659. For more complete information on Stainless Steel Products, see PANDUIT (R) Brochure SA-SSCB01. Most commonly used parts appear in BOLD. 79 Stainless Steel Strapping System * * * * Reduces installation time and leaves no sharp edges Burr-free sides 304 Stainless Steel Designed for use in critical applications where radiation, weathering, corrosion and temperature extremes are a concern * Temperature range: -112F (-80C) to 1000F (538C) * Fast and reliable alternative to wing seals Stainless Steel Strapping Part Number Min. Loop Tensile Width Strength in. (mm) lbs. (N) Thickness in. (mm) Max. Bundle Dia. in. (mm) Length in. (mm) Recommended PANDUIT (R) Installation Tool Part No. Std. Pkg. Qty.* Std. Ctn. Qty. MS2W38T15-L4 MS4W38T15-L4 MS6W38T15-L4 MS8W38T15-L4 MS10W38T15-L4 .015 (.38) .38 (9.5) 500 (2225) 2.00 (51) 4.00 (102) 6.00 (152) 8.00 (203) 10.00 (254) 11.8 18.0 24.4 30.7 37.0 (300) (457) (620) (780) (940) BT1HT or BT2MS75 50 50 50 50 50 250 250 250 250 250 MS4W50T15-L4 MS6W50T15-L4 MS8W50T15-L4 MS10W50T15-L4 .015 (.38) .50 (12.7) 700 (3115) 4.00 (102) 6.00 (152) 8.00 (203) 10.00 (254) 18.0 24.4 30.7 37.0 (457) (620) (780) (940) BT1HT or BT2MS75 50 50 50 50 250 250 250 250 MS4W63T15-L4 MS6W63T15-L4 MSW63T15-L4 MS10W63T15-L4 .015 (.38) .63 (15.9) 800 (3560) 4.00 (102) 6.00 (152) 8.00 (203) 10.00 (254) 18.0 24.4 30.7 37.0 (457) (620) (780) (940) BT1HT or BT2MS75 50 50 50 50 250 250 250 250 *Order the number of strapping, and buckles required in multiples of standard package quantities. The PANDUIT (R) Method Reduces Installation Time: 1. Place strap around the material, insert tail of strap through buckle. Pull strapping tight and bend up to hold in place. Insert tail of strapping into tool nose section. Squeeze handles to tension. 2. Once proper tension is reached, maintain tension and raise tool 90-120 over buckle and pull down on cutter lever, cutting strap. 3. Remove tool, press cut end down and toward retaining tab. Custom Length Strapping System * Provides job-site versatility with minimum inventory * Gives custom capability on larger diameters * 304 stainless steel * Buckle is easy to install--just slip onto strapping and turn strapping back on bundle Part Number Thickness In. (mm) 4. Using the closure level on the handle of the tool, bend retaining tab down and over cut end. Provides finished, safe, low profile closure. Approx. Width In. (mm) Used With Buckle Std. Pkg. Qty.* Std. Ctn. Qty. STRAPPING MSW38T15-CR4 .015 (.38) .38 (9.5) MSBW38-C4 1* -- MSW50T15-CR4 .015 (.38) .50 (12.7) MSBW50-C4 1* -- MSW63T15-CR4 .015 (.38) .63 (15.9) MSBW63-C4 1* -- BUCKLES MSBW38-C4 Used with .38" width strapping. 100 1000 MSBW50-C4 Used with .50" width strapping. 100 1000 MSBW63-C4 Used with .63" width strapping. 100 1000 *Order the number of strapping, and buckles required in multiples of standard package quantities. Installation Tools Part Number BT1HT Hand operated tool. Adjustable tension control and lever actuated cut-off. 80 Description Installation tool. Used for all widths of PANDUIT (R) PAN-STEEL(R) strapping. Tensions, cuts strapping, and secures the buckle tab. Ratchet-type tool provides mechanical advantage for tensioning. Easy to operate. Std. Pkg. Qty.* 1 *Order the number of pieces required in multiples of standard package quantities. For more complete information on Stainless Steel Products, see PANDUIT (R) Brochure SA-SSCB01. Most commonly used parts appear in BOLD. Wiring Accessories Wire Management Push Mounts Snap-In Clips Communication Cable Management Cord Clips Heat Shrink Adhesive Backed Mounts Abrasion Protection Products Harness Board Accessories Smart Ways to Lower Your Installed Cost PANDUIT (R) Wiring Accessories offer you a broad range of products designed to speed installation and lower your installed costs--whatever your requirements. Plus, PANDUIT (R) provides experienced technical support to assure you get not only the best product for your application, but maximum benefit from its use. For more information, in the U.S.A. call toll-free: Technical Support: 866-405-6657 or Customer Service: 800-777-3300 81 Wiring Accessories Contents (See back of catalog for alphabetical index of part numbers referencing specific page numbers.) Selection of Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Cable Tie Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-107 4-Way Adhesive Backed Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-86 4-Way Mounts Without Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 Combination Adhesive Mount/Cable Tie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 Adhesive Applied Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 Tie Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89-92 Tie Anchor Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-94 Tie Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 Right Angle Mounts/Lightening Hole Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Clip-On Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 Push Mounts and Specialty Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98-105 Tie Harness Mount System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100-101 Flat Cable Mount System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103 Marker Plates and Rolls/Marking Pens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105-106 TELCO Installation Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 Wiring Accessories -- used without cable ties . . . . . . . . . . . . . . . . . . . 108-123 Adjustable Releasable Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 Cord Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109-113 Flat Cable Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114-115 Fixed Diameter "C" Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116-117 Siding Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 Snap-in Mounts/Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120-121 Circuit Board Posts and Locking Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122-123 Harness Board Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124-129 Communication Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130-133 Selection and Use of PANDUIT (R) Adhesive Mounts . . . . . . . . . . . . . . . 134-136 Cable Management Bulk Package Part Numbers . . . . . . . . . . . . . . . . . 137-138 Abrasion Protection Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139-180 Heat Shrink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140-161 Non-Shrink PVC Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162-163 Spiral Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164-167 Split Harness Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168 Grommet Edging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169-171 Corrugated Loom Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172-174 Braided Expandable Sleeving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175-176 Flammability Tests, Classifications, Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . 177-180 Abrasion Protection Bulk Package Part Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 82 Most commonly used parts appear in BOLD. Wiring Accessories Wiring Accessories are an integral part of PANDUIT (R) comprehensive selection of wire management products. These accessories help provide the lowest installed solution to routing, mounting, protecting wire, cable and optical fiber. These products are manufactured in an environment committed to design innovation, high quality and knowledgeable service to our customers. The key benefits of this commitment are: * The highest quality manufacturing environment, including statistical process control to meet applicable international and domestic standards * PANDUIT (R) teams up with a global network of Distributors to provide you with Just In Time shipping to eliminate your need for large inventories * Fully staffed engineering and tool and die departments to assist in designing solutions to specific industry applications * Continuous research on materials, adhesives and new technologies to provide you the latest product innovations Selection of Styles Cable Tie Accessories These products are used with PANDUIT (R) Cable Ties to speed and simplify the mounting of wires, cables and tubing. Installation methods include adhesive-backed, user applied adhesive, screws, rivets or through-panel mount designs. Wiring Accessories These products, including fixed and adjustable diameter accessories, are used without cable ties. Mounting methods include adhesive-backed, user applied adhesive, screws, rivets or through-panel designs. Harness Board Accessories PANDUIT (R) unique selection of harness board accessories speeds the routing and forming of wire in harness fabrication. They hold wires at a uniform height above the board and are ideal for use with PANDUIT (R) manual and automatic cable tie tooling. Abrasion Protection Products PANDUIT (R) offers a wide variety of abrasion protection products to protect wires, cables, hoses and tubing from abrasion. Heat shrink tubing, non-shrink PVC tubing, spiral wrap, grommet edging, corrugated loom tubing and braided expandable sleeving are available in a variety of sizes and materials to meet a broad range of indoor and outdoor applications. Most commonly used parts appear in BOLD. 83 Wiring Accessories Part Number System and Technical Data Part Number System Example Part Description Package Quantity Color/Material -- For Part Description and Mounting Method, refer to specific product tables in catalog. Blank = Natural 0 = Weather Resistant Black 8 = Gray 15 = Ivory 20 = Pigmented Black 30 = Heat Stabilized Nylon (Black) 69 = Flame Retardant Nylon (Natural) 76 = TEFZEL* (Blue) 100 = Polypropylene Weather Resistant (Black) 109 = Polypropylene (Green) 120 = Weather Resistant Nylon 12 (Black) 630 = Heat Stabilized Nylon 6 (Black) 639 = Heat Stabilized Nylon 6 (Natural) 702 = HALAR** (Maroon) X = 10 Q = 25 L = 50 C = 100 T = 200 D = 500 M = 1000 Physical Properties and Colors of Wiring Accessory Materials Design Criteria Color Part Number Suffix UL Flammability -- UL94 Gamma Radiation Resistance Water Absorption UV Resistance Maximum Continuous Use Temperature Minimum Continuous Use Temperature General Purpose Nylon 6.6 Natural Black None 20 V-2 V-2 1 x 105 Rads 1 x 105 Rads 1.2% 1.2% (24 hrs) (24 hrs) Poor Fair Weather Resistant Nylon 6.6 Black 0 V-2 1 x 105 Rads 1.2% (24 hrs) Good Impact Modified Weather Resistant Nylon 6.6 Black 0 HB N/A 1.2% (24 hrs) Good 185F (85C) 185F (85C) 185F (85C) 185F (85C) -40F (-40C) -40F (-40C) -40F (-40C) -40F (-40C) Heat Stabilized Nylon 6.6 Black 30 V-2 1 x 105 Rads 1.2% (24 hrs) Good Flame Retardant Nylon 6.6 Black Natural 60 69 V-0 V-0 1 x 105 Rads 1 x 105 Rads 1.1% 1.1% (24hrs) (24hrs) Poor Poor Glass Filled Flame Retardant Nylon 6.6 Black None V-0 N/A 0.7% (24hrs) Poor 257F (125C) 230F (110C) 230F (110C) 230F (110C) -40F (-40C) -40F (-40C) -40F (-40C) -40F (-40C) Weather Resistant ABS Black 0 Flame Retardant Polycarbonate Black None Acetal Black None PVC Gray, White 8, 10 Physical Properties and Colors of Wiring Accessory Materials Design Criteria Color Part Number Suffix UL Flammability -- UL94 Gamma Radiation Resistance Water Absorption (24 hours) UV Resistance Maximum Continuous Use Temperature Minimum Continuous Use Temperature Heat Stabilized Nylon 6.6 Black Natural 630 639 TEFZEL* Blue 76 General Purpose Polypropylene White None Weather Resistant Polypropylene Black 100 Polyproplyene (Green) Green 109 HALAR** Maroon 702 HB HB V-0 HB HB HB V-0 HB HB HB V-0 HB V-0 N/A N/A 2 x 108 Rads 1 x 106 Rads 1 x 106 Rads N/A 2 x 108 Rads N/A N/A N/A N/A N/A N/A 1.5% (24 hrs) 1.5% (24hrs) <0.03% (24hrs) 0.1% (24 hrs) 0.1% (24hrs) 0.1% (24hrs) <0.05% (24hrs) 0.3% (24hrs) 0.3% (24hrs) 0.3% (24hrs) 0.15% (24hrs) 0.43% (24 hrs) 0.3% (30 days) Fair Poor Excellent Poor Good Poor Excellent Poor Fair Good Good Fair Poor 250F (121C) 250F (121C) 302F (150C) 221F (105C) 221F (105C) 221F (105C) 284F (140C) 150F (65C) 150F (65C) 150F (65C) 257F (125C) 194F (90C) 122F (50C) -40F (-40C) -40F (-40C) -50F (-46C) -40F (-40C) -40F (-40C) -40F (-40C) -50F (-46C) -40F (-40C) -40F (-40C) -40F (-40C) -40F (-40C) -40F (-40C) -40F (-40C) Based on assumption of minimal loading, chemical attack and impact free conditions. *TEFZEL is a registered trademark of E. I. DuPont de Nemours Co. **HALAR is a registered trademark of Solvay Solexis, Inc. 84 General Purpose ABS White Black None 20 Most commonly used parts appear in BOLD. Adhesive Backed Cable Tie Mounts 4-Way Adhesive Backed Mounts Lower your installed costs with fast, easy-to-install PANDUIT (R) adhesive-backed cable tie mounts. Four-way tie entry for easy orientation of wires or cables. PANDUIT (R) mounts are produced 2-up, 4-up, and with tear tabs for fast and easy liner removal to speed installation. For additional holding strength use #6 (M3) screws in the mounting hole(s). For specific information on adhesive properties and technical data on mount selection, see page 134-136. ABM1M ABMM A A B B C C Dimensions in. (mm) Packaging* Adhesive Std. Type/Static Pkg. Load lbs. (g) Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. Part Number Used With Cable Ties** A B C Material Color Where Used ABM1M-A-C M .50 (12.7) .50 (12.7) .16 (4.0) Nylon 6.6 White Indoors Rubber .13 (59) 100 500 1000 5000 ABM1M-AT-C M .50 (12.7) .50 (12.7) .16 (4.0) Nylon 6.6 White Indoors/ High Temp. Acrylic .13 (59) 100 500 1000 5000 ABMM-A-C M, I .75 (19.1) .75 (19.1) .18 (4.6) ABS White Indoors Rubber .30 (136) 100 500 500 5000 ABMM-A-C20 M, I .75 (19.1) .75 (19.1) .18 (4.6) ABS Black Indoors Rubber .30 (136) 100 500 -- -- ABMM-AT-C M, I .75 (19.1) .75 (19.1) .18 (4.6) ABS White Indoors/ High Temp. Acrylic .30 (136) 100 500 500 5000 ABMM-AT-C0 M, I .75 (19.1) .75 (19.1) .18 (4.6) ABS Black Outdoors/ High Temp. Acrylic .30 (136) 100 500 500 5000 *Parts shown for Std. Pkg. Qtys. Order number of mounts required in multiples of package quantities. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk packag e part numbers, see page 137-138. C able tie cross section sizes: M = Miniature and I = Intermediate. Most commonly used parts appear in BOLD. 85 Adhesive Backed Cable Tie Mounts 4-Way Adhesive Backed Mounts A A A B B C ABM2S ABM3H/ABM4H A B B C C ABM112 ABM100 Dimensions in. (mm) Part Number ABM2S-A-C Used With Cable Ties** A B Packaging* C Color ABS White Indoors ABM2S-AT-C .16 (4.2) ABM2S-AT-C0 1.00 (25.4) ABM100-A-C ABM100-AT-C ABM100-AT-C0 Material 1.00 (25.4) .23 (5.8) M, I, S Weather Resistant ABS Black Nylon 6.6 White Weather Resistant Nylon 6.6 Black ABM112-A-C 1.12 (28.6) 1.12 (28.6) White .14 (4.1) ABM112-AT-C0 Black ABM3H-A-L ABM4H-A-L Indoors/ High Temp. Outdoors/ High Temp. Indoors Outdoors/ High Temp. Indoors ABM112-AT-C ABM3H-AT-L Where Used M, I, S, HS, LH, H, HLM ! ABM4H-AT-L 1.50 (38.1) Nylon 6.6 1.50 (38.1) .25 (6.4) 2.00 (50.8) White 2.00 (50.8) Indoors/ High Temp. Outdoors/ High Temp. Indoors Indoors High Temp. Indoors Indoors/ High Temp. Adhesive Type/Static Load lbs. (g) Rubber .50 (227) Acrylic .50 (227) Rubber .50 (227) Acrylic .50 (227) Rubber .63 (286) Acrylic .63 (286) Rubber 1.12 (513) Acrylic 1.12 (513) Rubber 2.0 (907) Acrylic 2.0 (907) Std. Pkg. Qty. 100 Std. Ctn. Qty. 500 Bulk Pkg. Qty. 500 Bulk Ctn. Qty. 5000 100 500 500 5000 100 500 500 5000 100 500 500 5000 100 100 500 500 500 500 5000 5000 100 500 500 5000 100 1000 500 5000 100 1000 500 5000 50 500 200 1000 50 500 200 1000 50 500 200 1000 50 500 200 1000 Packaging* Std. Bulk Ctn. Pkg. Qty. Qty. -- 500 Bulk Ctn. Qty. 5000 4-WAY MOUNTS WITHOUT ADHESIVE Dimensions in. (mm) Part Number ABMM-D Used With Cable Ties** M, I A .75 (19.1) B .75 (19.1) C .14 (3.6) ABM2S-S6-D .16 (4.2) ABM100-S6-C ABM100-S6-C69 1.00 (25.4) M,I,S ABM112-S6-C ABM112-S6-C69 ABM3H-S6-T ABM4H-S6-T 1.00 (25.4) M, I, S, HS, LH, H, HLM ! Material ABS Color Where Used White Indoors .20 (5.1) Nylon 6.6 Flame Retard. Nylon 6.6 Natural 1.12 (28.6) 1.12 (28.6) .14 (4.1) Nylon 6.6 Flame Retard. Nylon 6.6 White Natural 1.50 (38.1) 2.00 (50.8) 1.50 (38.1) 2.00 (50.8) .21 (5.2) Nylon 6.6 White Indoors Adhesive Std. Type/Static Pkg. Load lbs. (g) Qty. User supplied -- adhesive User supplied -- adhesive and/or (2) #6 (M3) Screws User supplied 100 adhesive 100 and/or #6 (M3) Screw 100 100 User supplied adhesive -- and/or (2) #6 (M3) Screws -- -- 500 5000 1000 1000 500 500 5000 5000 1000 500 500 500 5000 5000 -- 200 1000 -- 200 1000 !Used with PANDUIT (R) HLM series Hook & Loop Cable Ties found on page 40. 86 Most commonly used parts appear in BOLD. *Order the number of mounts required in multiples of package quantities. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS= Heavy Standard, LH = Light-Heavy and H = Heavy. Adhesive Backed Cable Tie Mounts Combination Adhesive Mount/Cable Tie Adhesive mount and cable tie molded as one piece help reduce inventory costs. Mount portion features ramp to guide tip into tie head and holes to install two (2) optional #6 screws for added mounting strength. Available with locking or releasable tie. Extended adhesive liner release tab on mount for fast liner removal. .148 (3.76) .30 (7.6) B .90 (22.9) A REF. 1.0 (25.4) Cable Tie Specifications Part Number Locking PLA2S-A-Q Packaging* Length A in. (mm) Width B in. (mm) Max. Bundle Dia. in. (mm) Min. Loop Tensile Strength Lbs. (N) 7.4 (188) .19 (4.8) 1.85 (47) 50 (222) Recommended Adhesive PANDUIT (R) Type/Static Installation Tool Material Color Load lbs. (g) GTS, GS2B, PPTS, PTS, STS2 or STH2 Releasable PRA2S-A-Q Nylon 6.6 White Std. Pkg. Qty. Std. Ctn. Qty. Bulk Bulk Pkg. Ctn. Qty. Qty. 25 250 100 1000 25 250 100 1000 Rubber .45 (204) Hand Installed Only Snap-In Cable Tie Mounts Integral retaining notch holds cable tie head in place below bundle; eliminates protruding tie head and facilitates one hand tie threading. A B .145 (3.7) 1.12 (28.4) C Part Number Used With Cable Ties** Dimensions in. (mm) Packaging* Mounting Method Std. Pkg. Qty.* Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. A B C Material Color Where Used S 2.00 (50.8) 1.00 (25.4) .31 (7.9) ABS White Indoors Rubber Adhesive Static Load 1.0 lbs. (454g) 100 500 500 5000 S 2.00 (50.8) 1.00 (25.4) .31 (7.9) ABS White Indoors (2) #6 (M3) Screws -- -- 500 5000 ADHESIVE BACKED SMS-A-C SCREW MOUNT SMS-S6-D *Order the number of mounts required in multiples of package quantities. Most commonly used parts appear in BOLD. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part n umbers, see page 137-138. **Recommended cable ties: PLT1S, PLT1.5S, PLT2S, PRT1.5S, PRT2S. Cable Tie Cross Section: S = Standard. 87 Cable Tie Mounts Epoxy Applied Mounts These mounts are designed for application with PANDUIT (R) EMA Epoxy. Provides a fast, strong, economical method to secure wire or cable to steel, aluminum, glass, wood and most other surfaces. Especially well suited to construction and maintenance applications. Eliminates the need to drill holes. Part Number Dimensions in. (mm) Used With Cable Ties** A B C EMS-A-C EMS-A-C0 M, I, S .98 (24.9) .98 (24.9) .26 (6.6) Where Used Mounting Method Material Color Nylon 6.6 Natural Indoors Weather Resistant Nylon 6.6 Black Outdoors EMA Epoxy Max. Static Load lbs. (g)" 10 (4540) A B C Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 500 500 1000 100 500 500 5000 Epoxy Applied Swivel Mounts A Mount swivels 360 to assure proper orientation with harness. Four inspection holes to check adhesive coverage. 0.50" (12.7) B Material: Base and Rivet: Aluminum Mount: Natural Nylon 6.6 -- Indoors Part Number Used With Cable Ties ASMS-A-X M, I, S 0.75" (19) C Dimensions in. (mm) Packaging* A B C 1.125 (28.6) 1.125 (28.6) .35 (8.9) Where Used Mounting Method Indoors EMA Epoxy Max. Static Load lbs. (g)" Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 10 (4540) 10 50 200 1000 Epoxy Adhesive and Mount Kits EMA Epoxy supplied in convenient two-compartment mixer cup with a mixer stick for each cup. Each cup contains adhesive for three (3) EMS or ASMS mounts. Epoxy hardens in about five (5) minutes. Supports about 5 lbs. after first 15 minutes. After full 24-hour curing time, bonding strength will exceed 50 lbs. on clean, grease-free surface. Note: Not recommended for polyethylene and polypropylene. EMSK3-1-X0 Epoxy Kit with mounts. Packed in sturdy foil pouch Part Number Used With Cable Ties** EMA EPOXY Contents of Each Kit Packaging* Std. Pkg. Qty. Bulk Pkg. Qty. None 10 Kits -- 3 None 10 Kits 100 Kits 3 ea. PLT2S-0 12 ea. PLT2S-0 1 Kit 10 Kits 10 Kits 100 Kits Where Used Epoxy Cups Mixer Sticks EMS Mounts Cable Ties Indoor/ Outdoor 10 10 None 1 EPOXY ADHESIVE ONLY EMA-X -- EPOXY MOUNTING KIT WITH EMS MOUNTS EMSK3-1-X0 M, I, S Indoor/ Outdoor 1 EPOXY MOUNTING KIT WITH EMS MOUNTS AND CABLE TIES EMSK3-1-3-0 EMSK-12-4-12-X0 Epoxy Kit with mounts and cable ties 88 EMSK12-4-12-X0 M, I, S M, I, S Indoor/ Outdoor 1 1 3 4 4 12 *Order the number of mounts required in multiplies of package quantities. Part numbers listed are for standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard. " Max. static load rating, following full cure period, when applied with PANDUIT (R) EMA Epoxy Adhesive according to installation instructions. Most commonly used parts appear in BOLD. Cable Tie Mounts Tie Mounts -- Mechanically Applied Unique cradle design provides maximum stability and rigidity to the wire bundle. Screw or rivet installed. A A A Except TM1S4-M69 TM2S8-C100 TM3S8-C69 TM3S8-C100 A SECTION A-A SECTION A-A A A D D E C E C B B TM-S- Part Number Used With Cable Ties** TM-R- Dimensions in. (mm) Packaging* A B C D E .513 (13.0) .316 (8.0) .230 (5.8) .130 (3.3) .067 (1.7) Material Where Used Color TM1S4-C M TM1S6-C TM2S6-C Nylon 6.6 TM2S8-C M, I, S TM2R6-C .630 .425 (16.0) (10.8) .275 (7.0) .215 (5.5) Natural Indoors .060 (1.5) TM3S8-C TM3S10-C TM3S25-C M, I, S, HS, LH .858 .610 (21.8) (15.5) .375 (9.5) .320 (8.1) .080 (2.0) Nylon 6.6 Natural Indoors TM3R6-C Hole Diameter -- in. (mm) Part Number Hole Dia. Counterbore Dia. TM1S4 TM1S6 TM2S6 TM2S8 TM2R6 TM3S8 TM3S10 TM3S25 TM3R6 .120 (3.0) .150 (3.8) .150 (3.8) .180 (4.6) .190 (4.8) .180 (4.6) .200 (5.1) .260 (6.6) .190 (4.8) .230 (5.8) .280 (7.1) .280 (7.1) .320 (8.1) Countersunk .320 (8.1) .390 (9.9) .510 (12.9) Countersunk Mounting Method #4 (M2.5) Screw or Tapered Rivet #6 (M3) Screw or Tapered Rivet #8 (M4) Screw or Tapered Rivet #6 (M3) Screw or Countersunk Rivet #8 (M4) Screw or Tapered Rivet #10 (M5) Screw or Tapered Rivet 1/4 (M6) Screw or Tapered Rivet #6 (M3) Screw or Countersunk Rivet Std. Pkg. Qty. 100 Std. Ctn. Qty. 500 Bulk Pkg. Qty. 1000 Bulk Ctn. Qty. 5000 100 100 500 500 1000 1000 5000 5000 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 Additional Tie Mount Part Numbers Available in specified materials. All are available as standard PANDUIT (R) parts Heat Stabilized Nylon TM1S4-M30 TM1S6-M30 TM2R6-M30 TM2S6-M30 TM2S8-M30 TM3S8-M30 TM3S10-M30 TM3S25-M30 Flame Retardant Nylon TM1S4-M69 TM1S6-M69 TM2S6-M69 TM2S8-M69 TM3S8-C69 TM3S10-M69 Weather Resistant Nylon Weather Resistant Polypropylene TM1S6-M0 TM2R6-M0 TM2S6-M0 TM2S8-M0 TM3R6-M0 TM3S10-Q0 TM3S10-M0 TM3S25-M0 TM2S8-C100 TM3S8-C100 TM3S8-M100 TEFZEL*** TM3S10-C76 TM3S8-C76 TM2S8-C76 ***TEFZEL is a registered trademark of E.I. DuPont de Nemours Co. *Order the number of mounts required in multiples of package quantities. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numb ers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard and LH = Light-Heavy. Most commonly used parts appear in BOLD. 89 Cable Tie Mounts Extra-Heavy Tie Mounts Mounts designed especially for use with PANDUIT (R) Extra-Heavy cross-section ties for mounting cable, large wire bundles or tubular shapes. Part Number Hole Diameter Counterbore Diameter .18" (4.3 mm) .20" (5.1 mm) .26" (6.6 mm) .51" (13.0) .51" (13.0) .51" (13.0) TMEHS8 TMEHS10 TMEH25 A C Except TMEH-S10-C100 TMEH-S10-C109 B 1.05" (26.7) Part Number Used With Cable Ties** Dimensions in. (mm) A B Packaging* C TMEH-S8-Q0 Weather Resistant Nylon 6.6 TMEH-S10-Q0 M, I, S, HS, LH, EH, TMEH-S10-C100 HLM ! TMEH-S25-Q0 Material 1.65 (42) .74 (19) .61 (15.5) TMEH-S10-C109 Color Black Where Used Outdoors Weather Resistant Polypropylene Polypropylene Mounting Method Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 500 #8 (M4) Screw 25 250 100 #10 (M5) Screw 25 250 100 500 1/4 (M6) Screw 25 250 100 500 -- -- 100 500 -- -- 100 500 #10 (M5) Screw Green Indoors Swivel Cable Tie Mounts The two TM style mounts are securely fastened together with a rivet that allow both mounts to swivel. The Swivel Mount can join bundles of cable, tubing or hoses that may need to move or are not parallel. This mount is also a great way to separate bundles to avoid abrasion. 0.73 (18.54) 0.62 (15.75) 1.23 (31.34) .75 (19.05) 1.64 (41.70) .87 (22.10) TMEH TM3 Part Number Used With Cable Ties** TM3-X2-C0 M, I, S, HS, LH TMEH-X2-L0 M, I, S, HS, LH, EH, HLM ! 90 Packaging* Dimensions in. (mm) Pull Apart Force 120 lbs. See Drawing 250 lbs. Material Color Weather Resistant Nylon 6.6 Black Where Used Outdoors/ Indoors Std. Pkg. Qty. Std. Ctn. Qty. 100 1000 50 500 **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and EH = Extra-Heavy. Most commonly used parts appear in BOLD. *Order the number of mounts required in multiples of packaging quantities. Part numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. !Used with PANDUIT (R) HLM series Hook & Loop Cable Ties found on page 40. Cable Tie Mounts Stud Tie Mounts Easily applied to bolts or studs with a light hammer blow or turning of the mount. The mounts are designed for use with cable ties to mount wire bundles, air, water and hydraulic lines. C C A A B B TMSTLHS Type Part Number TMSTLHS5-M0 TMSTLHS6-M0 TMSTHS Type Dimensions in. (mm) Packaging* Used With Cable Ties** A B C M, I, S, HS, LH 1.25 (31.8) .48 (12.2) .95 (24.1) Material TMSTLHS8-M0 Impact Modified Weather Resistant Nylon 6.6 TMSTHS10-D0 TMSTHS13-D0 TMSTHS16-D0 M, I, S, HS, LH, H 1.99 (50.6) 1.01 (25.6) 1.10 (27.9) Color Black Where Used Outdoors TMSTHS19-D0 Mounting Method #12 Stud Dia. (5 mm) 1/4" Stud Dia. (6 mm) 5/16" Stud Dia. (8 mm) 3/8" Stud Dia. (10 mm) 1/2" Stud Dia. (13 mm) 5/8" Stud Dia. (16 mm) 3/4" Stud. Dia. (19 mm) Std. Pkg. Qty. 100 Std. Ctn. Qty. 1000 Bulk Pkg. Qty. 1000 Bulk Ctn. Qty. 5000 100 1000 1000 5000 100 1000 1000 5000 100 1000 500 500 100 1000 500 500 100 1000 500 500 100 1000 500 500 Spacer Mount Maintain a standoff from the frame rail in Chassis Tie applications. Ideal for applications where bundles must be secured away from the frame to avoid abrasion. 0.75 R (19.05) C A E D B Dimensions in. (mm) Part Number TMSH50-T300 Used A With Cable Tie Cable Channel Ties in. (mm) SSPM2.5H-L300 .310 SSPM4H-L300 (7.875) B Width in. (mm) 1.00 (25.4) C Standoff Height in. (mm) 1.00 (25.4) D E Base Recommended Depth Panel Hole Dia. in. (mm) in. (mm) 1.00 .50 (25.4) (12.7) Packaging* Material Weather Resistant Heat Stabilized Nylon 6.6 Minimum Panel Color Thickness Black 0.188 (4.78) Std. Std. Bulk Bulk Pkg. Ctn. Pkg. Ctn. Qty. Qty. Qty. Qty. 100 1000 200 1000 *Order the number of mounts required in multiples of package quantities. Most commonly used parts appear in BOLD. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS= Heavy Standard, LH = Light-Heavy and H = Heavy. 91 Cable Tie Mounts Tie Mounts -- Applied with User Supplied Adhesives Apply cyanoacrylic or another type adhesive to mount surface. Any adhesive selected should be user-tested to assure suitability for the actual application. Mounts should be installed on a clean, dry and grease-free surface. Bond strength depends on adhesive used. Low Profile Mount -- AM2 Low profile design keeps bundle close to mounting surface where overhead space is limited. A B Part Number Used With Cable Ties** AM2-C M, I, S C Dimensions in. (mm) Packaging* A B C Material Color Where Used 1.22 (31.2) 1.22 (31.2) .125 (3.2) Nylon 6.6 Natural Indoors TM1A, TM2A, TM3A Mounting Method User Supplied Adhesive Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 500 1000 5000 Solid flat bottom surface provides maximum adhesive area. A A SECTION A-A A B C Part Number TM1A-C Used With Cable Ties** M TM2A-C M, I, S TM3A-C M, I, S, HS, LH 92 Dimensions in. (mm) A .513 (13.0) .630 (16.0) .875 (22.2) Most commonly used parts appear in BOLD. B .316 (8.0) .425 (10.8) .620 (15.8) Packaging* C .230 (5.8) .275 (7.0) .375 (9.5) Material Color Where Used Nylon 6.6 Natural Indoors Mounting Method User Supplied Adhesive Std. Pkg. Qty. 100 Std. Ctn. Qty. 1000 Bulk Bulk Pkg. Ctn. Qty. Qty. 1000 10000 100 500 1000 5000 100 500 1000 5000 *Order the number of mounts required in multiples of package quantities. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part number s, see page 137-138. *Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard and LH = Light-Heavy. Cable Tie Mounts Screw Applied Tie Anchor Mounts Low profile and versatile, these screw-installed mounts can be ideal for applications where space is limited. Designed for four-way cable tie insertion, this mount can be mounted in-line or perpendicular to the wire bundle. TA1 Anchor D (Dia) = Hole Diameter C B Except TA1S8-M69 A Part Number TA1S8-C TA1S8-M0 Used With Cable Ties** Dimensions in. (mm) A B C D .17 (4.3) TA1S8-M30 TA1S8-M69 Packaging* M, I, S .75 (19.0) .38 (9.5) .20 (5.1) TA1S10-C TA1S10-M0 .20 (5.1) TA2 Anchor Material Nylon 6.6 Weather Resistant Nylon 6.6 Heat Stabilized Nylon Flame Retardant Nylon 6.6 Nylon 6.6 Weather Resistant Nylon 6.6 Color Natural Black Where Used Black Mounting Method #8 (M4) Screw Indoors Std. Pkg. Qty. 100 -- Std. Ctn. Qty. 500 -- Bulk Pkg. Qty. 1000 1000 Bulk Ctn. Qty. 5000 5000 -- -- 1000 5000 -- -- 1000 5000 100 -- 500 -- 1000 1000 5000 5000 Natural Natural Black #10 (M5) Screw This mount is installed perpendicular to the wire bundle. Elongated slot permits installing the screw and adjusting mount position with the bundle attached. .50" (12.7) .195" (5.0) .125" (3.2) 1.225" (31.1) Packaging* Part Number TA2-C Used With Cable Ties** Dimensions in. (mm) Material M, I, S See Drawing Nylon 6.6 *Order the number of mounts required in multiples of package quantities. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbe rs, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard. Color Where Used Mounting Method Std. Pkg. Qty. Natural Indoors #10 (M5) Screw 100 Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 500 1000 5000 Most commonly used parts appear in BOLD. 93 Cable Tie Mounts Screw Applied Low Profile Mounts Designed to secure wire bundles where space is limited. A B C D (Dia) Part Number LPMM-S2-C Used With Cable Ties** M LPMM-S5-C M LPMS-S8-C M, I, S Dimensions in. (mm) A .40 (10.2) .40 (10.2) .75 (19.1) B .32 (8.1) .32 (8.1) .50 (12.7) C .10 (2.5) .10 (2.5) .12 (3.0) D .0951 (2.4) .1302 (3.3) .1702 (4.3) Material Color Nylon 6.6 Natural Where Used Indoors Indoors Indoors Mounting Method #2 (M2) Flathead Screw #5 (M3) Flathead Screw #8 (M4) Flathead Screw Std. Pkg Qty. 100 Packaging* Std. Bulk Bulk Ctn. Pkg. Ctn. Qty. Qty. Qty. 1000 1000 10,000 100 1000 1000 10,000 100 1000 1000 5000 NOTE 1: Combination Counterbore and Countersunk Hole (.088" (2.2) Dia. rivet can also be used). NOTE 2: Countersunk Hole Knock-In Low Profile Mounts Secures wires to any pre-drilled panel. Can be installed in any panel thickness. Eliminates screws. Easy to Install: .53 REF. (13.46) .190 (4.825) 1. Push rivet in pre-drilled panel hole. .735 (18.670) 2. Use PANDUIT (R) Rivet Installation Tool (TNR) or hammer to drive the pin flush to the base. This drives the rivet into the hole and secures the mount. A .230 (5.840) .490 (12.445) .120 3. Attach wires to the mount with cable tie. Packaging* Part Number KIMS-H366-C2 Used With Cable Ties** M, I, S KIMS-H430-C6 M, I, S KIMS-H500-C4 M, I, S 94 A .155 (3.9) .180 (4.6) .202 (5.1) Dimensions in. (mm) See Drawing See Drawing See Drawing Most commonly used parts appear in BOLD. Hole Size .144 (3.7) .169 (4.3) .196 (5.0) Material Nylon 6.6 Color Red Nylon 6.6 Blue Nylon 6.6 Yellow Where Used Indoors Mounting Method Integral Push Rivet Integral Push Rivet Integral Push Rivet Std. Pkg. Qty. 100 Std. Ctn. Qty. 500 Bulk Pkg. Qty. 1000 Bulk Ctn. Qty. 5000 100 1000 1000 5000 100 500 1000 5000 *Order the number of mounts required in multiples of package quantities. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard. Cable Tie Plates Tie Plates Screw applied. Each tie plate has a slotted mounting hole to accommodate various fastener spacings. A G D (Dia) F B C E Dimensions in. (mm) Used With Cable Ties** Part Number TP2-C TP4H-C M, I, S, HS A B C D E F G 1.98 (50.3) .50 (12.7) .125 (3.2) .200 (5.1) .40 (10.2) .200 (5.1) 1.60 (40.6) 3.08 (78.2) .62 (15.7) .203 (5.2) .270 (6.9) .31 (7.9) .270 (6.9) 2.50 (63.5) Multiple Tie Plates Color & Material Where Used Natural Nylon 6.6 Indoors Packaging* Mounting Method " Screw Size Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. #10 (M5) 100 1000 1000 5000 1/4 (M6) 100 1000 500 2500 Screw applied. Used to secure closely spaced wire bundles. E B F D A C Part Number MTP1S-E6-C MTP1S-E10-C MTP1H-E6-C MTP1H-E10-C No. of Bdls. 1 MTP2S-E6-C MTP2S-E10-C MTP2H-E6-C MTP2H-E10-C 2 MTP4S-E6-C MTP4S-E10-C MTP4H-E6-C MTP4H-E10-C MTP6H-E6-C MTP6H-E10-C C .125 (3.2) M, I, S, 2.09 HS, LH, H (53.1) .62 (15.7) .203 (5.2) 3.00 (76.2) .50 (12.7) .125 (3.2) M, I, S, 3.59 HS, LH, H (91.2) .62 (15.7) .203 (5.2) 4.25 (108.0) .50 (12.7) .125 (3.2) M, I, S, 5.09 HS, LH, H (129.3) .62 (15.7) .203 (5.2) 5.50 (139.7) .50 (12.7) .125 (3.2) M, I, S, 6.59 HS, LH, H (167.4) .62 (15.7) .203 (5.2) 6.75 (171.5) .50 (12.7) .125 (3.2) M, I, S, 8.09 HS, LH, H (205.5) .62 (15.7) M, I, S, 9.59 HS, LH, H (243.6) .62 (15.7) M, I, S 4 MTP5S-E6-C MTP5S-E10-C MTP5H-E6-C MTP5H-E10-C B .50 (12.7) M, I, S 3 M, I, S 5 6 Dimensions in. (mm) A 1.75 (44.5) M, I, S MTP3S-E6-C MTP3S-E10-C MTP3H-E6-C MTP3H-E10-C Used With Cable Ties** M, I, S .203 (5.2) D E 1.25 .220 (5.58) (31.8) .330 (7.62) 1.50 .220 (5.58) (38.1) .300 (7.62) 1.25 .220 (5.58) (31.8) .300 (7.62) 1.50 .220 (5.58) (38.1) .300 (7.62) 1.25 .220 (5.58) (31.8) .300 (7.62) 1.50 .220 (5.58) (38.1) .300 (7.62) 1.25 .220 (5.58) (31.8) .300 (7.62) 1.50 .220 (5.58) (38.1) .300 (7.62) 1.25 .220 (5.58) (31.8) .300 (7.62) .220 (5.58) 1.50 .300 (7.62) (38.1) .220 (5.58) .300 (7.62) F .147 (3.73) .200 (5.08) .147 (3.73) .200 (5.08) .147 (3.73) .200 (5.08) .147(3.73) .200 (5.08) .147 (3.73) .200 (5.08) .147 (3.73) .200 (5.08) .147 (3.73) .200 (5.08) .147 (3.73) .200 (5.08) .147 (3.73) .200 (5.08) .147 (3.73) .200 (5.08) .147 (3.73) .200 (5.08) Packaging* Mounting Method " Std. Std. Bulk Bulk Mil. Std. Screw Pkg. Ctn. Pkg. Ctn. Part No. Size Qty. Qty. Qty. Qty. MS3339-1 #6 (M3) 100 1000 -- -- -- #10 (M5) 100 1000 MS3339-6 #6 (M3) 100 1000 -- -- -- #10 (M5) 100 1000 MS3339-2 #6 (M3) 100 1000 -- -- -- #10 (M5) 100 1000 MS3339-7 #6 (M3) 100 1000 -- -- -- #10 (M5) 100 1000 MS3339-3 #6 (M3) 100 1000 -- -- -- #10 (M5) 100 1000 Natural MS3339-8 #6 (M3) 100 1000 Nylon 6.6, -- -- -- #10 (M5) 100 1000 Indoors MS3339-4 #6 (M3) 100 1000 -- -- -- #10 (M5) 100 1000 MS3339-9 #6 (M3) 100 1000 -- -- -- #10 (M5) 100 1000 MS3339-5 #6 (M3) 100 1000 -- -- -- #10 (M5) 100 1000 MS3339-10 #6 (M3) 100 1000 -- -- -- #10 (M5) 100 1000 MS3339-11 #6 (M3) 100 1000 -- -- -- #10 (M5) 100 1000 Material & Where Used *Order the number of mounts required in multiples of package quantities. Most commonly used parts appear in BOLD. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and H = Heavy. "For use with most common screw types except flat head. 95 Cable Tie Mounts Right Angle Mounts Secure wire bundles that run through bulkheads or cabinet holes, holding them away from sharp edges. Can also be used to mount wire bundles adjacent to any surface. Screw or rivet applied. A B D (Dia) C E F Part Number Used With Cable Ties** RAMS-S3-M M, I, S Dimensions in. (mm) A B C D E F .56 (14.2) .39 (9.9) .44 (11.2) .095 (2.4) .06 (1.5) .281 (7.1) RAMH-S6-D RAMH-S10-D .125 (3.2) M, I, S, HS, LH and H 1.00 (25.4) .75 (19.1) Lightening Hole Mounts 1.00 (25.4) .200 (5.1) .18 (4.6) .500 (12.7) Color, Material & Where Used Natural Nylon 6.6, Indoors Packaging* Mounting Method in. (mm) Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. MS3341-2 #3 (M2.5) Screw or 3/32 (2.4) Round Head Rivet -- -- 1000 5000 MS3341-1 #6 (M3) Screw or 1/8 (3.2) Round Head Rivet -- -- 500 5000 -- #10 (M5) Screw or 3/16 (4.7) Round Head Rivet -- -- 500 5000 Mil. Std. Part No. Used to secure wire bundles which run through bulkhead lightening holes (.87" (22.1mm) diameter or larger) and keep bundles away from sharp edges. Only one screw or rivet needed. .70" (17.8) .75" (19.1) .30" (7.6) 1.10" (27.9) .55" (14.0) D (Dia) .20" (5.1) .45" (11.4) Part Number Used With Cable Ties** LHMS-S5-D M, I, S 96 D Color, Material & Where Used .127 (3.2) LHMS-S6-D LHMS-S10-D Dimensions in. (mm) .145 (3.7) .192 (4.9) Most commonly used parts appear in BOLD. Natural Nylon 6.6, Indoors Packaging* Mounting Method in. (mm) Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty.* Bulk Ctn. Qty. -- #5 (M3) Screw or 1/8 (3.2) Rivet -- -- 500 2500 MS3340-1 #6 (M3) Screw or 9/64 (3.5) Rivet -- -- 500 2500 -- #10 (M5) Screw or 3/16 (4.7) Rivet -- -- 500 2500 Mil. Std. Part No. *Order the number of mounts required in multiples of package quantities. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and H = Heavy. Cable Tie Mounts Metal Clip-On Mounts The mount clips on sheet metal edges for fast mounting of harnesses with cable ties. Ties may be inserted from any of the four sides for easy harness orientation. A B Part Number Used With Cable Ties** Dimensions in. (mm) A M, I, S Packaging* C Max. Panel Thickness .31 (8.0) .13 (3.2) .46 (11.5) .24 (6.1) .55 (14.0) .27 (6.9) B MCMS12-P-C MCMS25-P-C C .88 (22.4) MCMS30-P-C .56 (14.2) Metal Mount Material Zinc Plated Steel Where Used Mounting Method Indoors or Outdoors Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 100 500 -- -- 100 500 -- -- 100 500 Clip-On Screw applied aluminum mounting base for a secure support in demanding applications. * NOTE: Mount can also be installed with a user supplied adhesive A .200" Dia. (For #10 Screw) B C Part Number Used With Cable Ties** MBMS-S10-C M, I, S Dimensions in. (mm) Packaging* A B C Material 1.00 (25.4) .50 (12.7) .14 (3.6) Aluminum (Chromate Coated) MIL C. 5541 D Class 3 Coating *Order the number of mounts required in multiples of packaging quantities. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard. Where Used Mounting Method Indoors or Outdoors #10 (M5) Screw Max. Static Load lbs. (g) Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. 10 (4540) 100 1000 1000 10000 Most commonly used parts appear in BOLD. Bulk Ctn. Qty. 97 Cable Tie Mounts Push Mounts -- Winged Push Mounts Push mounts require no adhesive or additional mounting hardware. They are inserted into pre-drilled holes. The winged base applies pressure on the panel wall to provide a more secure mount in high vibration applications. Can be used where only one side of the panel is accessible. PWMS-H25 .303 (7.7) .17 (4.4) TM2PWH25 Part Number Panel Dimensions in. (mm) Dimensions in. (mm) Thickness Hole Max. Diameter PWMS-H25-C .105 (2.7) PWMS-H25-M0 M, I, S .61 (15.4) .72 (18.2) .610 (15.5) Used With Cable Ties** .24 (6.1) See Drawing TM2PWH25-C .250 (6.4) .094 (2.3) Packaging* Where Used Mounting Method Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. Material Color Nylon 6.6 Natural Indoors 100 1000 1000 5000 Weather Resistant Nylon 6.6 Black Outdoors -- -- 1000 5000 Nylon 6.6 Natural Indoors 100 500 1000 5000 Inserted into Pre-Drilled Hole Part number shown for PWMS-H25-C and TM2PWH25-C is standard package quantity. Push Mounts Part Number Used With Cable Ties** This part is a version of the mount shown above, but without tensioning wings. Panel Dimensions in. (mm) Dimensions in. (mm) Thickness Hole Max. Diameter Packaging* Material Color PM2H25-C Nylon 6.6 Natural PM2H25-M0 Weather Resistant Nylon 6.6 M, I, S See Drawing .125 (3.2) .250 (6.4) PM2H25-M30 Heat Stabilized Nylon 6.6 Black Std. Pkg. Qty. Std. Ctn. Qty. Indoors 100 500 1000 5000 Outdoors -- -- 1000 5000 -- -- 1000 5000 Where Used Indoors Mounting Method Inserted into Pre-Drilled Hole Bulk Pkg. Qty. Bulk Ctn. Qty. Part number shown for PM2H25-C is standard package quantity. Push Button Mounts Designed for use where both sides of the panel are accessible. .080" (2.0) .445" Dia. (11.3) .325" (8.3) Part Number Used With Cable Ties** Panel Dimensions in. (mm) Dimensions in. (mm) Thickness Hole Max. Diameter PBMS-H25-C Packaging* Material Nylon 6.6 PBMS-H25-C14 PBMS-H25-M0 M, I, S See Drawing PBMS-H25-M30 .125 (3.2) .25 (6.4) Weather Resistant Nylon 6.6 Heat Stabilized Nylon 6.6 Color Natural Gray Where Used Indoors Outdoors Black Mounting Method Indoors Inserted into Pre-Drilled Hole Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 500 1000 5000 100 500 1000 5000 -- -- 1000 5000 -- -- 1000 5000 Part number shown for PBMS-H25-C and PBMS-H25-C14 is Standard Package Quantity. 98 Most commonly used parts appear in BOLD. *Order the number of mounts required in multiples of package quantities. For Bulk package part numbers, See page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard. Cable Tie Mounts Masonry Push Mounts Used to secure wire, cable or tubing to masonry surfaces. Installed quickly into pre-drilled holes. Holds bundle securely. B B C C A A MPMS19-C0 MPMS25-C0 MPMH38-L0 1. Drill hole using correct size bit. Part Number Used With Cable Ties** 2. Hammer mount into hole. Dimensions in. (mm) A B MPMS25-C0 MPMH38-L0 MPMWH32-L0 .97 (24.6) .25 (6.4) 1.25 M, I, S, HS, (31.8) LH, H, and 1.41 HLM ! (35.8) .30 (7.5) .28 (7.1) 3. Place cable tie through mount. 4. Install wires or cable. Hole Dimensions in. (mm) Drill Depth C Hole Diameter MPMS19-C0 M, I, S MPMWH32-L0 .22 (5.6) Wood Push Mount Material Where Used Color Mounting Method .188 (5) 1.25 (31.8) .38 (9.6) Packaging* .25 (6) 1.50 (38.1) .375 (10) 1.75 (44.5) .313 (8) Impact Modified WeatherResistant Nylon 6.6 Outdoors or Inserted into Indoors Pre-Drilled Hole Black Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 500 1000 5000 100 500 1000 5000 50 500 500 5000 50 500 500 5000 Used to secure wire, cable, or tubing to wood surfaces. Driven into wood with hammer, barbed design holds mount in place -- rated for 60 lb. pullout. B C D A Part Number WPMH-C Used With Cable Ties** M, I, S, HS, LH, H, and HLM ! Dimensions in. (mm) Packaging* A B C D Material .75 (19.1) .31 (7.9) .50 (12.7) .19 (4.8) 16 gauge steel zinc plated Where Used Mounting Method Outdoors or Indoors Hammer into Wood Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 500 -- -- *Order the number of mounts required in multiples of package quantities. Most commonly used parts appear in BOLD. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. !Used with PANDUIT (R) HLM series Hook & Loop Cable Ties found on page 40. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and H = Heavy. 99 Tie Harness Mounts used with Corrugated Loom Tubing Tie Harness Mounts Tie Harness Mounts are designed to be attached to the wire harness during assembly with 2 cable ties. Ties can be installed by hand or, more efficiently, with PANDUIT (R) PAT Automatic Cable Tie Tooling (see page 60). Use with Harness Board Standoff Post (page 129). Available with or without corrugated loom tubing location tab. A B Location tab appears on parts used with corrugated tubing. B A C C THMSP -- Push Barb Style THMSC -- Tree Barb Style FOR CORRUGATED TUBING -- A specially designed location tab on the mount shelf aligns with grooves in corrugated tubing ensuring proper mount location during assembly. Part Number Used With Cable Ties** Dimensions in. (mm) A B Panel Dimensions in. (mm) C Thickness Hole Max. Diameter THMSP20-C .47 (11.9) THMSP20-C30 THMSP25-C THMSP25-C30 M, I, S 1.54 (39.1) .37 (9.5) THMSC35-C639 THMSC35-C630 .16 (4.1) .244-.283 (6.2-7.2) .54 (13.7) .23 (5.8) .46 (11.7) .25 (6.4) .244-.268 (6.2-6.8) Packaging* Where Used Mounting Method Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. Material Color Nylon 6.6 Natural Indoors 100 1000 -- -- Heat Stabilized Nylon 6.6 Black Indoors/ High Temp. 100 1000 -- -- Nylon 6.6 Natural Indoors Heat Stabilized Nylon 6.6 Black Heat Stabilized Nylon 6 Natural Push Barb Indoors/ High Temp. Tree Barb Black 100 1000 1000 5000 100 1000 1000 5000 100 1000 1000 5000 100 1000 1000 5000 FOR DISCRETE WIRING -- There is no location tab for applications not requiring the use of corrugated tubing. Part Number Used With Cable Ties** Dimensions in. (mm) A B Panel Dimensions in. (mm) C Thickness Hole Max. Diameter THMSP20F-C .47 (11.9) THMSP20F-C30 THMSP25F-C THMSP25F-C30 M, I, S 1.54 (39.1) .37 (9.5) THMSC35F-C639 THMSC35F-C630 100 Most commonly used parts appear in BOLD. .16 (4.1) .244-.283 (6.2-7.2) .54 (13.7) .23 (5.8) .46 (11.7) .25 (6.4) .244-.268 (6.2-6.8) Packaging* Where Used Mounting Method Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. Material Color Nylon 6.6 Natural Indoors 100 1000 -- -- Heat Stabilized Nylon 6.6 Black Indoors/ High Temp. 100 1000 -- -- Nylon 6.6 Natural Indoors Heat Stabilized Nylon 6.6 Black Indoors/ High Temp. Heat Stabilized Nylon 6 Natural Black Indoors/ High Temp. Push Barb 100 1000 -- -- 100 1000 1000 5000 100 1000 1000 5000 Tree Barb *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, and S = Standard. Tie Harness Mount for Single Tie THM1SC Tie Harness Mount for Single Cable Tie -- Unique Mount is Attached to Harness Automatically as Tie is Installed * Secured with only 1 cable tie * Can be used with auto-fed or loose piece cable ties * Cable ties can be installed by hand with PANDUIT (R) Automatic Cable Tie Tooling Installation Systems (see page 60) or pneumatic tool (page 58) or hand operated cable tie tools (page 56) * Winged design prevents vibration * Barb design is easy to insert into pre-drilled hole * 50 lb. vertical extraction force from .250" hole A B C Part Number Used With Cable Ties** Dimensions in. (mm) A B Panel Dimensions in. (mm) C Thickness Hole Max. Diameter THM1SC-C THM1SC-C30 M, I, S .98 (24.8) .38 (9.5) .75 (19.1) .187 (4.7) .250 (6.5) Packaging* Where Used Material Color Nylon 6.6 Natural Indoors Heat Stabilized Nylon 6.6 Black Indoors/ High Temp. Mounting Method Tree Barb Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 1000 1000 5000 100 1000 1000 5000 *Order the number of pieces required in multiples of package quantities. Most commonly used parts appear in BOLD. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard. 101 Cable Tie Mounts Control Panel Mount Installed behind control panel switch. Ideal for high strain areas where cable is routed from panel door to panel. Compatible with most control panel switch designs. B C D A E G F H Part Number Used With Cable Ties** CPM87S-C CPM122S-C M, I, S Dimensions in. (mm) A B C D .89 (22.6) .57 (14.5) 1.44 (36.6) .75 (19.1) 1.22 (31.0) .75 (19.1) 2.07 (52.6) 1.12 (28.4) PAN-POST TM Standoff Packaging* E .048 (1.2) F .17 (4.3) G H .76 (19.3) .75 (19.1) .82 (20.8) 1.12 (28.4) PP2S-S10-X M, I, S PP2S-S12-X 102 Most commonly used parts appear in BOLD. -- -- 100 1000 -- -- 100 1000 Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. #10 (M5) Screw 10 50 100 1000 #12 (M5.5) Screw 10 50 100 1000 #10 (M5) Screw 10 50 100 1000 #12 (M5.5) Screw 10 50 100 1000 Zinc Plated Steel Control Panel Switch 1.10" (27.9) Dimensions in. (mm) A .200 (5.1) PP1S-S12-X Bulk Ctn. Qty. A (Hole Dia.) .62" .75" (19.1) (15.9) PP1S-S10-X Bulk Pkg. Qty. Mounting Material Method B 1.00" (25.4) Part Number Std. Ctn. Qty. Supports wire bundles above or away from surface. .72" Typ. (18.3) Used With Cable Ties** Std. Pkg. Qty. .228 (5.8) .200 (5.1) .228 (5.8) Packaging* B Color & Material 2.00 (50.8) Natural Nylon 6.6 4.60 (116.8) Mounting Method *Order the number of pieces required in multiples of package quantities. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part n umbers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate and S = Standard. Cable Tie Mounts Right Angle Base RAFCB For use in perpendicular applications. Supports cable above the mount surface. .75" (19.1) C .50" (12.7) A .145" Dia (3.7) B Packaging* For Flat Cable Widths (Up to) A in. (mm) RAFCBI1-S6-C20 1.00 (25.4) 1.75 (44.4) RAFCBI2-S6-C20 2.00 (50.8) 2.78 (70.6) RAFCBI3-S6-C20 3.00 (76.2) 3.81 (96.8) Part Number B in. (mm) Color & Material C in. (mm) .125 (3.2) .125 (3.2) Flat Cable Mounting System Where Used Black Nylon 6.6 Indoors Mounting Method Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 500 1000 5000 100 500 1000 4000 100 500 1000 4000 #6 (M3) Screw Secures stacked cables, folds and breakouts as well as laminated and molded bus bars. Base FCB D (Dia) Plate FCP C C E B B F F G A A Mounting Application Use one base, one corresponding size plate and one intermediate cable tie. Dimensions in. (mm) Packaging* For Flat Cable Widths (Up to) A B C D E F G FCBI1-S10-C20 1.00 (25.4) 3.29 (83.5) 1.04 (26.4) 2.08 (52.8) .150 (3.8) .375 (9.5) .200 (5.1) .095 (2.4) FCBI2-S10-C20 2.00 (50.8) 3.50 (88.9) 2.04 (51.8) 3.10 (78.7) .150 (3.8) .375 (9.5) .200 (5.1) .095 (2.4) FCBI3-S10-C20 3.00 (76.2) 4.52 3.04 (114.8) (77.2) 4.12 (104.6) .150 (3.8) .375 (9.5) .200 (5.1) FCBI1-A-C20 1.00 (25.4) 3.29 (83.5) 1.04 (26.4) 2.08 (52.8) .150 (3.8) .375 (9.5) FCBI2-A-C20 2.00 (50.8) 3.50 (88.9) 2.04 (51.8) 3.10 (78.7) .150 (3.8) FCBI3-A-C20 3.00 (76.2) 4.52 3.04 (114.8) (77.2) 4.12 (104.6) FCPI1-C20 1.00 (25.4) 1.29 (32.8) 1.04 (26.4) FCPI2-C20 2.00 (50.8) 2.31 (58.7) FCPI3-C20 3.00 (76.2) 3.32 (84.3) Part Number Bundling Application Use two plates (same size) and one intermediate cable tie. Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. #10 (M5) Screw 100 1000 1000 5000 #10 (M5) Screw 100 1000 1000 5000 .095 (2.4) #10 (M5) Screw 100 1000 1000 5000 .200 (5.1) .095 (2.4) Adhesive Backed 100 1000 1000 5000 .375 (9.5) .200 (5.1) .095 (2.4) Adhesive Backed 100 1000 1000 5000 .150 (3.8) .375 (9.5) .200 (5.1) .095 (2.4) Adhesive Backed 100 1000 1000 5000 .375 (9.5) -- -- .200 (5.1) -- Cable Ties 100 1000 1000 5000 2.04 (51.8) .375 (9.5) -- -- .200 (5.1) -- Cable Ties 100 1000 1000 5000 3.04 (77.2) .375 (9.5) -- -- .200 (5.1) -- Cable Ties 100 1000 1000 5000 Color & Material Black Nylon 6.6 Black Nylon 6.6 Black Nylon 6.6 Where Used Indoors Indoors Indoors Mounting Method *Order the number of mounts required in multiples of package quantities. Most commonly used parts appear in BOLD. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. 103 Cable Tie Mounts -- Connector Rings Closed Connector Rings Connect multiple wire bundles or hang bundles from conduit, eliminating the need for saddle clamps. A C B Part Number Used With Cable Ties** CR2-M M, I, S Dimensions in. (mm) Packaging* A B C Material Color Where Used .33 (8.4) .24 (6.1) .20 (5.1) Nylon 6.6 Natural Indoors Mounting Method Cable Ties CR4H-M CR4H-M0 M, I, S, HS, LH .57 (14.5) .36 (9.1) Open Connector Ring .30 (7.6) Weather Resistant Nylon 6.6 Black Indoors/ Outdoors Cable Ties Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn Qty. -- -- 1000 10000 -- -- 1000 10000 -- -- 1000 10000 Designed to "add on" wire bundles without changing cable ties. .52" (13.2) .26" (6.6) .18" (4.6) Packaging* Part Number Used With Cable Ties** Dimensions in. (mm) Material CROS-M M, I, S See Drawing Nylon 6.6 104 Most commonly used parts appear in BOLD. Color Where Used Mounting Method Natural Indoors Connects to M, I, S Cable Ties Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 1000 5000 *Order the number of pieces required in multiples of packaging quantities. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard and LH = Light-Heavy. Cable Tie Mounts Cable Spacers Used to separate and/or hang wires, cable and hoses. 2.12 (53.8) .62 (15.7) .50 (12.7) Packaging* Part Number Used With Cable Ties** Dimensions in. (mm) Material CSH-D20 CSH-D0 Where Used Color Nylon 6.6 M, I, S, HS, LH, H Cable Spacer -- Cross Indoors Weather Resistant Nylon 6.6 See Drawing Mounting Method Outdoors or Indoors Black Cable Ties Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 500 2500 -- -- 500 2500 Connects two bundles at 90. Provides .19" (4.8mm) space between bundles. Dual cradle design. Recommended max. bundle diameter (each) is .625" (15.9mm). .45 (11.4) .37 (9.4) .25 (6.3) Packaging* Part Number Used With Cable Ties** DImensions in. (mm) Material CSCS-M M, I, S See Drawing Nylon 6.6 Marking Pens Mounting Method Natural Indoors Cable Ties -- Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- 1000 10000 Provide fast drying, permanent, legible identification on nylon -- where ordinary marking pens will not work. PX-0 PX-2 Part Number Color Where Used Std. Pkg. Qty. PFX-0 PFX-2 PX-10 Std. Pkg. Qty.* Std. Ctn. Qty. Color of ink is color of pen. Reversible tip to extend life of pen. 12 12 144 144 Tip Color PX-0 PX-2 Regular Regular Black Red Description PX-10 Regular White For marking black or other dark-colored parts. Color of tip denotes color. 12 300 PFX-0 PFX-2 Fine Fine Black Red For detailed marking on nylon surfaces. Color of cap and tip is color of ink. 12 12 144 144 *Order the number of pieces required in multiples of packaging quantities. Most commonly used parts appear in BOLD. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and H = Heavy. 105 Cable Tie Mounts Marker Plates PANDUIT (R) Marker Plates can be mounted in any direction, either vertically or horizontally as flags, tags, or wrap-around identification plates. They can be marked with nylon marking pens or hot stamped. See page 105 for marker pen information. Typ. Nom. Dia. .195" (5.0) THICKNESS: .015" (0.4mm) A .44" (11.2) B C Part Number Dimensions in. (mm) Used With Cable Ties Packaging* Bulk Pkg. Qty. Bulk Ctn. Qty. A B C 1.50 (38.1) .75 (19.0) 1.03 (26.2) 100 500 1000 5000 MP175-C 1.75 (44.5) .75 (19.0) 1.28 (32.5) 100 500 1000 5000 2.00 (50.8) .75 (19.0) 1.53 (38.4) 100 500 1000 5000 2.50 (63.5) .75 (19.0) 2.03 (51.6) 100 500 1000 5000 MP350-C 3.50 (88.9) .75 (19.0) 3.03 (77.0) 100 500 1000 5000 MP250W175-C 2.50 (63.5) 1.75 (44.5) 2.03 (51.6) 100 500 1000 5000 MP150-C0 1.50 (38.1) .75 (19.0) 1.03 (26.2) 100 500 1000 5000 MP175-C0 1.75 (44.5) .75 (19.0) 1.28 (32.5) 100 500 1000 5000 2.00 (50.8) .75 (19.0) 1.53 (38.4) 100 500 1000 5000 MP250-C0 2.50 (63.5) .75 (19.0) 2.03 (51.6) 100 500 1000 5000 MP350-C0 3.50 (88.9) .75 (19.0) 3.03 (77.0) 100 500 1000 5000 Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 1000 5000 -- -- 1000 5000 -- -- 1000 5000 -- -- 1000 5000 MP250-C MP200-C0 M, I, S M, I, S Color Mounting Method Std. Ctn. Qty. MP150-C MP200-C Material Where Used Std. Pkg. Qty. Nylon 6.6 White Weather Resistant Nylon 6.6 Indoors Black Outdoors Marker Plates on Rolls Cable Ties Weather Resistant Cable Ties D .44 (11.2) B C A Part Number MP150-R MP175-R MP200-R MP250-R Dimensions in. (mm) Used With Cable Ties M, I, S Packaging* A B C D 1.50 (38.1) .75 (19.0) 1.03 (26.2) 1.69 (42.9) 1.75 (44.5) .75 (19.0) 1.28 (32.5) 1.94 (49.3) 2.00 (50.8) .75 (19.0) 1.53 (38.9) 2.19 (55.6) 2.50 (63.5) .75 (19.0) 2.03 (51.6) 2.69 (68.3) Material Nylon 6.6 Color White Where Used Indoors Mounting Method Cable Ties Marker Plate Kits Part Number MP150KIT-Q MP250KIT-Q MP350KIT-Q 106 Description Kit contains 25 MP150 marker plates, 1 PFX-0 marking pen. Kit contains 25 MP250 marker plates, 1 PFX-0 marking pen. Kit contains 25 MP350 marker plates, 1 PFX-0 marking pen. Most commonly used parts appear in BOLD. Std. Pkg. Qty.* 1 1 1 *Order the number required in multiples of packaging quantities. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numb ers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, and S = Standard. Outside Plant Products Stackable Cable Spacer A .79 (20.1) Just one part to inventory. Each spacer snaps by hand into another-- increases spacer height by 1/2" increments. Because there is only one part, on-site sorting is eliminated. Can be used with up to 3/4" width lashed cable supports in parallel or perpendicular applications. Used perpendicular to strand and cable Part Number SACS50-T100 Used With Cable Ties See Footnote .40 (10.2) .77 (19.6) B .71 (18.0) C .45 (11.4) Used parallel to strand and cable Underground application Dimensions in. (mm) A B Packaging* Material Color Where Used Weather Resistant Polypropylene Black Outdoors C 2.08 1.16 .50 (52.8) (29.5) (12.7) .51 (13.0) Mounting Method Std. Pkg. Qty. Cable Ties -- Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- 200 2000 Stackable Spacers may be installed using Weather-Resistant Lashing Ties (see page 15). Weather- Resistant Extra-Heavy and Light-Heavy Cable Ties (see page 15), and Stainless Steel Ties (see page 77). Weather Resistant Polypropylene Aerial Support Tie -- With integral 1/2" (12.7mm) spacer Designed to attach coax or telephone cable to the support strand 1/4" (6.4mm) or 5/16" (7.9mm) to form the expansion loop and keep equipment and cables clear of pole hardware. One-piece construction with integral spacer reduces inventory costs of separate spacer and bands and installs faster to lower the installed cost. Releasable and reusable. B D A REF. C Support Strand Max. Dia.: .32 (8.1 mm) Min. Dia: .22 (5.6 mm) Part Number AST10-5-C100 AST15-5-C100 AST20-5-C100 AST25-5-C100 Head Length Width Thickness Width A B C D in. (mm) in. (mm) in. (mm) in. (mm) 5.6 (142) 6.9 (175) .448 .055 1.16 (11.4) (1.4) (29.5) 8.4 (214) 10.0 (254) Max. Bundle Dia. in. (mm) 1.0 (25) 1.5 (38) 2.0 (51) 2.5 (64) Min. Loop Tensile Strength lbs. (N) 75 (334) Recommended PANDUIT (R) Installation Tool Part Number Hand Installed Only Spacer Height .50 (12.7 mm) Nom. Packaging* Std. Std. Pkg. Ctn. Qty. Qty. 100 1000 100 1000 100 1000 100 1000 CABLE (or Cable Bundle) Assembled View *Order the number of pieces required in multiples of package quantities. Most commonly used parts appear in BOLD. 107 Cable and Wire Mounting Devices (used without cable ties) Wiring Accessories are an integral part of the PANDUIT (R) comprehensive selection of wire management products. These accessories are one piece solutions that help provide the lowest installed cost for controlling, mounting and protecting wire and cable. Mounting methods include: * Adhesive-Backed * Screw applied * Rivet applied * Push Mounts Adhesive Backed Mounting Devices Faster Liner Removal Speeds Installation and Lowers Installed Cost * The adhesive backed mounts are offered either as one or two mounts per liner * The two-up mounts are easily removed by bending the mounts away from the liner * The individual mounts have a convenient tear tab for quick removal CLINCHER TM Adjustable Releasable Clamp This clamp provides a fast and convenient method of securing bundles from .19" (4.8mm) up to .69" (17.5mm) diameter. It is available with adhesive backing or screw applied with one #6 (M3) screw. The CLINCHER TM clamp is fast and easy to use. . . 1.00 (25.4) .50 (12.7) .38 Rad (9.5) Part Number Bundle Dia. in. (mm) Material Color ARC.68-A-Q White ARC.68-A-Q14 Gray ARC.68-S6-Q .19-.69 (4.8-17.5) Polypropylene ARC.68-S6-Q14 108 Most commonly used parts appear in BOLD. Lift tab to release 1.00 (25.4) White Gray .15 Dia (3.9) Where Used Indoors Packaging* Mounting Method Max. Static Load lbs. (g) Rubber Adhesive .50 (227) 25 250 100 25 250 100 1000 #6 (M3) Pan Head Screw -- 25 250 100 1000 -- 25 250 100 1000 Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 1000 *Order the number of mounts required in multiples of packaging quantities. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. Cable and Wire Mounting Devices Adhesive Backed Cord Clips -- ACC Type Three sizes of clips to hold cords, tubing, cable, or wire bundles up to .62" (15.7mm) diameter. Bundles are easily snapped into or out of the clips. C B Part Number ACC19-A-C ACC19-AT-C ACC19-A-C20 ACC19-AT-C0 Max. Bundle Dia. in. (mm) .19 (4.8) Dimensions in. (mm) A B .62 .76 (15.9) (19.3) C D .25 (6.5) .39 (9.9) ACC38-A-C ACC38-AT-C ACC38-A-C20 ACC38-AT-C0 .38 (9.6) 1.00 1.00 (25.4) (25.4) .27 (6.9) .49 (12.4) ACC62-A-C ACC62-AT-C ACC62-A-C20 ACC62-AT-C0 .62 (15.7) A D 1.24 1.12 (31.4) (28.6) .63 (16.1) .74 (18.8) Material Nylon 6.6 Nylon 6.6 Color Natural Natural Nylon 6.6 Weather Resistant Nylon 6.6 Nylon 6.6 Nylon 6.6 Black Black Nylon 6.6 Weather Resistant Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Weather Resistant Nylon 6.6 Natural Natural Black Black Natural Natural Black Black Where Used Indoors Indoors/ High Temp. Indoors Outdoors/ High Temp. Adhesive Type Rubber Acrylic Indoors Indoors/ High Temp. Indoors Outdoors/ High Temp. Rubber Acrylic Indoors Indoors/ High Temp. Indoors Outdoors/ High Temp. Rubber Acrylic Rubber Acrylic Rubber Acrylic Rubber Acrylic Max. Static Load lbs. (g) .20 (91) .50 (227) .70 (318) Packaging* Std. Pkg. Qty. 100 100 Std. Ctn. Qty. 500 500 Bulk Pkg. Qty. 1000 1000 Bulk Ctn. Qty. 5000 5000 100 100 500 500 1000 1000 5000 5000 100 100 500 500 1000 1000 5000 5000 100 100 500 500 1000 1000 5000 5000 100 100 500 500 500 500 5000 5000 100 100 500 500 500 500 5000 5000 Push Mount Cord Clip Mounts snap easily into pre-drilled holes. Integral mounting device eliminates the need for additional mounting hardware. The winged design holds mount in place in applications where vibration is present. Part Number PMCC38H25-C PMCC38H25-M0 Max. Bundle Dia. in. (mm) .38 (9.6) .50" (12.7) .38" (9.6) .90" (22.9) Panel Dimensions in. (mm) Dimensions See drawing Material Nylon Weather Resistant Nylon 6.6 *Order the number of mounts requried in multiples of packaging quantities. Part Numbers listed are for Standard Materials in Standard Package Quantity. For Bulk package part numbers, see page 137-138. Color Natural Black Where Max. Hole Used Thickness Diameter Indoors .105 .250 Outdoors (2.7) (6.4) Packaging* Mounting Method Inserted into a Pre-Drilled Hole Std. Pkg. Qty. 100 -- Std. Ctn. Qty. 1000 -- Most commonly used parts appear in BOLD. Bulk Pkg. Qty. 1000 1000 Bulk Ctn. Qty. 5000 5000 109 Cable and Wire Mounting Devices AJC Type These low profile "J" clips retain cords, wires, or tubing and are available in four sizes. Their flexible design allows for easy cord insertion yet holds bundles tightly. C D Dia. E B A Part Number AJC19-A-C AJC25-A-C AJC31-A-C AJC38-A-C Max. Bundle Dia. in. (mm) .19 (4.8) .25 (6.4) .31 (7.9) .38 (9.6) A1C25-A-C8 A1C38-A-C8 A1C50-A-C8 Max. Bundle Dia. in. (mm) .12 (3.0) .25 (6.4) .38 (9.5) .50 (12.7) A2C25-A-C8 A2C38-A-C8 A2C50-A-C8 110 B 1.25 (31.8) 1.50 (38.1) 1.75 (44.5) 2.00 (50.8) C .30 (7.6) .34 (8.6) .44 (11.2) .53 (13.5) D .19 (4.8) .25 (5.8) .31 (7.9) .38 (10.2) E .77 (19.6) .77 (19.6) 1.03 (26.2) 1.03 (26.2) Gray, PVC Where Used Mounting Method Indoors Rubber Adhesive Max. Static Load lbs. (g) .50 (227) .60 (272) .90 (408) 1.0 (454) Packaging* Std. Pkg. Qty. -- Std. Ctn. Qty. -- Bulk Pkg. Qty. 100 Bulk Ctn. Qty. 1000 -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 Dimensions in. (mm) A .77 (19.6) .91 (23.1) 1.04 (26.4) 1.17 (29.7) B .63 (16) .63 (16) .63 (16) .63 (16) C .23 (5.8) .38 (9.7) .51 (13) .64 (16.3) Material Color Where Used PVC Gray Indoors Mounting Method Max. Static Load lbs. (g) Rubber Adhesive .14 (64) Packaging* Std. Pkg. Qty. -- Std. Ctn. Qty. -- Bulk Pkg. Qty. 100 Bulk Ctn. Qty. 1000 -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 Holds cords, cables and tubing. Two adhesive pads for added strength. A2C Type Part Number A2C12-A-C8 A .89 (22.6) .92 (23.4) 1.23 (31.2) 1.28 (32.5) Color & Material Holds cords, cables and tubing. Single adhesive pad for confined areas. A1C Type Part Number A1C12-A-C8 Dimensions in. (mm) Max. Bundle Dia. in. (mm) .12 (3.0) .25 (6.4) .38 (9.5) .50 (12.7) Dimensions in. (mm) A 1.30 (33) 1.43 (36.3) 1.56 (39.6) 1.72 (43.7) B .63 (16) .63 (16) .63 (16) .63 (16) C .23 (5.8) .36 (9.1) .49 (12.4) .61 (15.5) Material PVC Color Gray Where Used Mounting Method Max. Static Load lbs. (g) Indoors Rubber Adhesive .37 (169) Packaging* Std. Pkg. Qty. -- Std. Ctn. Qty. -- Bulk Pkg. Qty. 100 Bulk Ctn. Qty. 1000 -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 *Order the number of mounts required in multiples of package quantities. Most commonly used parts appear in BOLD. Cable and Wire Mounting Devices MACC Type Part Number MACC25-A-C MACC62-A-C Metal adhesive backed cord clip can be opened and closed without damage to the clip, to remove or add wires quickly and easily. Max. Bundle Dia. in. (mm) .25 (6.4) .62 (15.7) Dimensions in. (mm) A .53 (13.5) .75 (19.1) B .79 (20) 1.18 (30) LWC Type C .28 (7.1) .28 (7.1) Material Color Where Used Zinc Plated Steel -- Indoors Mounting Method Rubber Adhesive Max. Static Load lbs. (g) .21 (95) .44 (200) Packaging* Std. Pkg. Qty. 100 Std. Ctn. Qty. 1000 Bulk Pkg. Qty. -- Bulk Ctn. Qty. -- 100 1000 -- -- Holds wires, cable and tubing and is available in 6 sizes, with releasable latch. Adhesive backed and push mount styles available. Large mounting base for high bonding strength. B C A Part Number LWC19-A-C LWC19-A-C14 LWC19-A-C20 LWC25-A-C LWC25-A-C14 LWC25-A-C20 LWC38-A-C LWC38-A-C14 LWC38-A-C20 LWC50-A-L LWC50-A-L14 LWC50-A-L20 LWC75-A-L LWC75-A-L14 LWC75-A-L20 LWC100-A-L LWC100-A-L14 LWC100-A-L20 LWC19-H25-C LWC19-H25-C14 LWC19-H25-C20 LWC25-H25-C LWC25-H25-C14 LWC25-H25-C20 LWC38-H25-C LWC38-H25-C14 LWC38-H25-C20 LWC50-H25-L LWC50-H25-L14 LWC50-H25-L20 LWC75-H25-L LWC75-H25-L14 LWC75-H25-L20 LWC100-H25-L LWC100-H25-L14 LWC100-H25-L20 Max. Bundle Dia. in. (mm) C Dimensions in. (mm) A B Adhesive Version Push Mount Version Panel Thickness in. (mm) C .19 (4.8) .61 .85 (15.5) (21.6) .39 (9.9) .25 (6.4) 1.0 .88 (25.4) (22.2) .45 (11.4) .37 (9.5) 1.0 1.0 (25.4) (25.4) .56 (14.2) .50 (12.7) 1.0 1.26 (25.4) (32.0) .67 (17.0) .75 (19.1) 1.24 1.48 (31.5) (37.6) .90 (22.9) 1.0 (25.4) 1.97 2.21 (50.0) (56.1) 1.26 (32.0) .19 (4.8) .51 .85 (12.8) (21.6) .41 (10.4) .25 (6.4) .58 .86 (14.7) (21.8) .47 (11.9) .37 (9.5) .58 .94 (14.7) (23.9) .57 (14.5) .50 (12.7) .76 1.25 (19.3) (31.8) .78 (19.8) .75 (19.1) .87 1.45 (22.1) (36.8) .97 (24.7) 1.0 (25.4) .99 1.89 (25.1) (47.9) 1.30 (33.0) Material Nylon 6.6 Nylon 6.6 Color Natural Gray Black Natural Gray Black Natural Gray Black Natural Gray Black Natural Gray Black Natural Gray Black Natural Gray Black Natural Gray Black Natural Gray Black Natural Gray Black Natural Gray Black Natural Gray Black Max. Static Where Mounting Load Max. Hole Used Thickness Diameter Method lbs. (g) .25 (113) .45 (204) Indoors -- -- Rubber Adhesive .50 (227) .63 (284) .94 (425) 2.25 (1020) -- -- Indoors .102 (2.6) *Order the number of mounts required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. .220 (5.6) Inserted into Pre-Drilled Hole -- -- -- -- Std. Pkg. Qty. 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 Packaging* Std. Bulk Ctn. Pkg. Qty. Qty. 1000 -- 1000 500 1000 -- 1000 500 1000 500 1000 -- 1000 500 1000 500 1000 -- 500 200 500 200 500 -- 500 100 500 100 500 -- 500 100 500 100 500 -- 1000 500 1000 500 1000 500 1000 500 1000 500 1000 -- 1000 500 1000 500 1000 -- 500 200 500 200 500 -- 500 100 500 100 500 -- 500 100 500 100 500 -- Most commonly used parts appear in BOLD. Bulk Ctn. Qty. -- 5000 -- 5000 5000 -- 5000 5000 -- 2000 2000 -- 1000 1000 -- 1000 1000 -- 5000 5000 5000 5000 5000 -- 5000 5000 -- 2000 2000 -- 1000 1000 -- 1000 1000 -- 111 Cable and Wire Mounting Devices BEC Type Bevel Entry Clips are available in 3 sizes to hold tubing, cable or wire bundles. The beveled entry makes it easy to snap in the bundle. The clips are available in push barb or adhesive backed styles. Adhesive Version B C Push Mount Version C A Part Number BEC38-A-L Dimensions in. (mm) Max. Bundle Dia. in. (mm) A .38 (9.6) 1.46 (37.1) BEC38-A-L20 B Panel Dimensions in. (mm) C 1.24 .52 (31.5) (13.2) BEC38-AT-L0 .62 (15.7) 1.46 (37.1) .75 (19) 1.46 (37.1) BECP38H25-L BECP38H25L20 BECP75H25-L BECP75H25L20 .38 (9.6) 1.46 (37.1) .73 1.0 (18.5) (25.4) .75 (9.6) 1.47 (37.3) .73 1.35 (18.5) (34.3) Nylon 6.6 Natural Indoors -- -- Nylon 6.6 Black Indoors -- -- -- Nylon 6.6 Natural Indoors -- -- Nylon 6.6 Black Indoors -- -- Weather Resist. Nylon 6.6 Black Outdoors -- -- Nylon 6.6 Natural Indoors -- -- Nylon 6.6 Black Indoors -- -- Weather Resist. Nylon 6.6 Black Outdoors -- -- Black Natural Indoors .08 (1.9) .250 (6.4) 50 500 200 1000 50 500 200 1000 50 500 200 1000 50 500 200 1000 50 500 200 1000 50 500 200 1000 50 500 200 1000 50 500 200 1000 -- -- 50 50 500 500 200 200 1000 1000 -- -- 50 50 500 500 200 200 1000 1000 .91 (411) .91 (411) 1.09 (493) Natural Nylon 6.6 ADCC Type Packaging* Max. Static Std. Std. Bulk Bulk Load Pkg. Ctn. Pkg. Ctn. lbs. (g) Qty. Qty. Qty. Qty. 50 500 200 1000 Mounting Method in. (mm) Rubber Adhesive Rubber Adhesive Acrylic Adhesive Rubber Adhesive Rubber Adhesive Acrylic Adhesive Rubber Adhesive Rubber Adhesive Acrylic Adhesive Max. Hole Thickness Diameter -- 1.49 .89 (37.8) (22.6) BEC75-AT-L0 Where Used Outdoors BEC75-A-L BEC75-A-L20 Color Black 1.24 .79 (31.5) (20.1) BEC62-AT-L0 Material Weather Resist. Nylon 6.6 BEC62-A-L BEC62-A-L20 A Inserted into Pre-Drilled Hole Black Holds two cables in high temperature applications both indoors and outdoors. .681 (17.3) .44 (11.2) 1.00 (25.4) Part Number ADCC31-AT-C10 Max. Bundle Dia. in. (mm) 2 bundles .20-.31 (5.1-7.9) Material NORYL* Color White Where Used Indoors/ Outdoors Mounting Method Acrylic Adhesive Max. Static Load lbs. (g) .25 (113) Packaging* Std. Pkg. Qty. 100 Std. Ctn. Qty. 500 *NORYL is a registered trademark of General Electric Company. AMC Type Holds a single cable and can be mounted on any flat smooth surface both indoors and outdoors. .36 (9.14) .81 (20.6) Part Number AMC25-AT-C10 112 Max. Bundle Dia. in. (mm) .22-.28 (6 -7) Material Color PVC White Most commonly used parts appear in BOLD. 1.00 (25.4) Where Used Mounting Method Max. Static Load lbs. (g) Indoors/ Outdoors Acrylic Adhesive .40 (182) Packaging* Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. -- -- 1000 1000 *Order the number of mounts required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. Cable and Wire Mounting Devices VCC Type Funnel entry design of this vertical cord clip allows for easy insertion of wires, cables and cords. Top loading for fast production operations. A Part Number VCC25-A-C VCC25-A-C20 VCC50-A-C B Dimensions in. (mm) Max. Bundle Dia. in. (mm) A B .25 (6.4) .50 (12.7) 1.00 (25.4) .50 (12.7) 1.00 (25.4) 1.56 (39.7) Material Nylon 6.6 Color Natural Black Natural Where Used Mounting Method Indoors Rubber Adhesive Packaging* Max. Static Std. Load Pkg. lbs. (g) Qty. 100 .25 (113) 100 .78 100 (354) Std. Ctn. Qty. 500 500 500 Bulk Pkg. Qty. 1000 1000 200 Bulk Ctn. Qty. 5000 5000 1000 This versatile clip retains and supports wire for a variety of applications. Provides a quickly installed mount with a locked cover which withstands vibration yet allows easy access. Latching Clip C A Dimensions in. (mm) Max. Bundle Dia. in. (mm) A B C LC3-A-C8 .20 (5.0) .75 (19) .78 (19.8) .47 (11.9) LC5-A-C8 .36 (9.1) 1.00 (25.4) 1.01 (25.7) .61 (15.5) LC10-A-L8 .93 (23.6) 1.00 (25.4) 1.51 (38.4) .84 (21.3) Part Number B Cable Holder Material PVC Color Gray Where Used Mounting Method Rubber Adhesive Indoors Holds wires, cables and tubing and has a releasable latch. Adhesive backed and screw mount styles available. Large mounting base for high bonding strength. Max. Static Std. Load Pkg. lbs. (g) Qty. Packaging* Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. .22 (100) -- -- 100 1000 .44 (200) -- -- 100 1000 .60 (272) -- -- 50 500 A B D E C Dimensions in. (mm) Part Number Packaging* Cable Width in. (mm) A B C D E Material Color Where Used 2.00 (50.8) 5.04 (128.0) 2.48 (63.0) 2.06 (52.3) .59 (15.0) 1.50 (38.1) Nylon 6.6 Gray Indoors CH105-A-C14 CH105-S6-C14 *Order the number of mounts required in multiples of package quantities. Part numbers listed are standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. Mounting Method Max. Static Load lbs. (g) Rubber Adhesive 1.28 (582) (2) #6 (M3) Screws -- Std. Pkg. Qty. Std. Ctn. Qty. 100 200 Most commonly used parts appear in BOLD. 113 Cable and Wire Mounting Devices Adhesive Backed Flat Cable Mounts LPFCM Type -- Low Profile This low profile mount is available in 3 sizes and provides cost effective cable containment and identification for stack heights up to .105" (2.67mm). It features a matte, textured surface for either hand written identification or application of computer labels. B A .060 (1.5) .500 (12.7) C 0.138 Dia. (3.5) .045 (1.1) Identification Area Dimensions in. (mm) Part Number LPFCM14-A-C14 LPFCM22-A-C14 LPFCM34-A-C14 Cable Width in. (mm) A B 1.44 2.56 2.00 (37) (65) (50.8) 2.19 3.31 2.75 (56) (84) (69.9) 3.44 4.56 4.00 (87) (115.8) (101.6) C .134 (3.4) Packaging* D 2.00 (50.8) 2.75 (69.9) 4.00 (101.6) Material Color Where Used Nylon 6.6 Gray Indoors Mounting Method Rubber Adhesive/ Static Load .25 lbs (113g) or (2) #6 (M3) Screws Std. Pkg. Qty. 100 Std. Ctn. Qty. 500 Bulk Pkg. Qty. 500 Bulk Ctn. Qty. 5000 100 500 500 5000 100 500 500 5000 Adhesive Backed Flat Cable Mounts -- FCM Type The FCM will hold flat cable securely without damaging the cable's jacket or conductors. The four available sizes will accommodate cable up to 3.25" wide and allow cable stacking up to .17" (4.3mm). All sizes are available with or without adhesive backing. 0.50 (12.7) A A 0.50 (12.7) 1.00 (25.4) 0.14 DIA THRU (3.6) 1.00 (25.4) 0.14 (3.6) DIA. THRU D C FCM1 & FCM1.2 B 1.5 (38.1) D C TEAR-TAB FCM2 & FCM3.25 TEAR-TAB B Dimensions in. (mm) Part Number Cable Width in. (mm) A B C D Material Color Where Used Mounting Method Indoors Rubber Adhesive/Static Load .5 lbs. (227g) Rubber Adhesive/Static Load .62 lbs. (281g) Rubber Adhesive/Static Load 1.0 lbs. (454g) Rubber Adhesive/Static Load 1.5 lbs. (681g) Std. Pkg. Qty. Packaging* Std. Bulk Ctn. Pkg. Qty. Qty. Bulk Ctn. Qty 100 500 200 1000 100 500 200 1000 100 500 200 1000 50 500 200 1000 100 500 200 1000 100 500 200 1000 100 500 200 1000 50 500 200 1000 ADHESIVE BACKED FCM1-A-C14 1.00 (25.4) 2.90 (73.7) 1.21 (30.7) 1.05 (26.7) .61 (15.5) FCM1.2-A-C14 1.20 (30.5) 3.16 (80.3) 1.37 (34.8) 1.20 (30.5) .69 (17.5) FCM2-A-C14 2.00 (50.8) 5.06 (128.5) 2.22 (56.4) 2.05 (52.1) .37 (9.4) FCM3.25-A-L14 3.25 (82.5) 7.30 (185.4) 3.38 (85.9) 3.23 (82.0) .94 (23.9) 1.00 (25.4) 1.20 (30.5) 2.00 (50.8) 3.25 (82.5) 2.90 (73.7) 3.16 (80.3) 5.06 (128.5) 7.30 (185.4) 1.21 (30.7) 1.37 (34.8) 2.22 (56.4) 3.38 (85.9) 1.05 (26.7) 1.20 (30.5) 2.05 (52.1) 3.23 (82.0) .61 (15.5) .69 (17.5) .37 (9.4) .94 (23.9) Nylon 6.6 Gray SCREW MOUNTED FCM1-S6-C14 FCM1.2-S6-C14 FCM2-S6-C14 FCM3.25-S6-L14 114 Most commonly used parts appear in BOLD. #6 (M3) Screw Nylon 6.6 Gray Indoors (2) #6 (M3) Screws *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantities. For Bulk package part numbers, see page 137-138. Cable and Wire Mounting Devices Adhesive Backed Flat Cable Mounts -- FCH Type The FCH part is designed for flat cable up to a stack height of .25" (6.3mm) or discrete wire. It is available with adhesive backing or can be screw applied. A 0.50 (12.7) 0.14 DIA THRU (3.6) .63 (16.00) 1.03 (26.16) D E C B TEAR-TAB Dimensions in. (mm) Part Number FCH2-A-C14 Cable Width in. (mm) A B C D E Material Color Where Used 2.00 (50.8) 5.00 (128.1) 2.50 (63.0) 2.10 (52.2) .59 (15.0) 1.50 (38.1) Nylon 6.6 Gray Indoors FCH2-S6-C14 Adhesive Backed Flat Cable Mounts -- FCC Type Mounting Method Rubber Adhesive/ Static Load 1.0 lbs. (454g) (2) #6 (M3) Screws Std. Pkg. Qty. 100 Packaging* Std. Bulk Ctn. Pkg. Qty. Qty. 500 200 100 500 -- Bulk Ctn. Qty. 1000 -- Used with any width flat cable for a maximum stack height of .17" (4.3mm). B A C TEAR-TAB Dimensions in. (mm) Part Number FCC5-A-C8 FCC-A-C8 Cable Width in. (mm) Any width flat cable A 1.00 (25.4) B .56 (14.1) C .29 (7.4) 1.00 (25.4) 1.09 (27.7) .38 (9.7) Material Color Where Used PVC Gray Indoors Mounting Method Rubber Adhesive/Static Load .25 lbs. (113g) Rubber Adhesive/Static Load .50 lbs. (227g) Std. Pkg. Qty. 100 Packaging* Std. Bulk Ctn. Pkg. Qty. Qty. 1000 500 Bulk Ctn. Qty. 5000 100 1000 5000 500 *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantities. For Bulk package part numbers, see page 137-138. Most commonly used parts appear in BOLD. 115 Cable and Wire Mounting Devices PAN-CLAMP TM Heavy Duty Fixed Diameter Clamp with Integrated Fastener PANDUIT (R) PAN -CLAMP TM Heavy Duty Fixed Diameter Clamps offer easy installation and economical assembly for a wide variety of applications. * Integrated fastener replaces up to a five piece assembly * Anchors with 70 lbs. (31.8kg) of pull out force and supports 125 lbs. (56.7kg) of shear 1. Install into 1/8" (3.2mm) thick panel or bracket with a hole diameter of 0.281" (7.1mm) typical clearance hole for 1/4" (6mm) bolts. 2. Molded barbs keep the clamp secured in the hole during assembly. B 3. Rivet installs easily by hand. No special tools required. A Bundle Diameter C Dimensions in. (mm) Part Number A B Packaging* Material C Color Panel Hole Size in. (mm) Panel Thickness in. (mm) Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. PC038-H25D-C0 3/8 (9.5) .65 (16.5) 100 500 500 1000 PC050-H25D-C0 1/2 (12.7) .71 (18.0) 100 500 500 1000 PC062-H25D-C0 5/8 (15.8) .77 (19.6) 100 1000 500 1000 PC075-H25D-C0 3/4 (19.1) 100 1000 500 1000 100 1000 500 1000 .62 (15.7) .84 (21.3) Black .275 (7.0) .126 (3.2) PC087-H25D-C0 7/8 (22.1) PC100-H25D-C0 1 (25.4) .96 (24.3) 100 1000 200 1000 PC112-H25D-C0 1 1/8 (28.5) 1.02 (25.9) 100 1000 200 1000 PC125-H25D-C0 1 1/4 (31.8) 1.08 (27.4) 100 1000 200 1000 116 Most commonly used parts appear in BOLD. .90 (22.9) Impact Modified Weather Resistant Nylon 6.6 *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. Cable and Wire Mounting Devices Fixed Diameter Cable Clamps Durable nylon cable clamps are available in two widths: 3/8" wide for standard use and 1/2" wide for heavy duty use. A (Dia.) C D (Dia.) E B NOTE: All parts listed also available in black weather resistant material (-0). Bulk package only. Dimensions in. (mm) Part Number Type of Application 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 D .17 (4.2) CCS19-S8-C .19 (4.8) .43 (10.9) .17 (4.2) CCS25-S8-C .25 (6.4) .41 (10.4) .17 (4.2) .41 (10.4) .20 (5.1) .49 (12.4) .17 (4.2) .38 (9.5) .57 (14.5) .17 (4.2) CCS44-S8-C .44 (11.1) .59 (15.0) .17 (4.2) CCS50-S8-C .50 (12.7) .60 (15.2) .17 (4.2) CCH12-S10-C .13 (3.1) .36 (9.1) 100 500 1000 5000 CCH19-S10-C .19 (4.8) .43 (10.8) 100 500 1000 5000 CCH25-S10-C .25 (6.4) .46 (11.7) 100 500 1000 5000 CCH31-S10-C .31 (7.9) .50 (12.7) 100 500 1000 5000 CCH38-S10-C .38 (9.5) .53 (13.5) 100 500 1000 5000 CCH44-S10-C .44 (11.1) .56 (14.2) 100 500 1000 5000 CCH50-S10-C .50 (12.7) .60 (15.1) 100 500 1000 5000 CCH56-S10-C .56 (14.3) .63 (15.9) 100 500 1000 5000 CCH62-S10-C .63 (15.9) .66 (16.8) 100 500 1000 5000 100 500 500 5000 CCS31-S8-C CCS38-S8-C CCH69-S10-C Heavy Duty .31 (7.9) .69 (17.5) .50 (12.7) .76 (19.2) Color Bulk Ctn. Qty. C .38 (9.5) Material Bulk Pkg. Qty. .33 (8.4) .25 (6.4) E Mounting Method .13 (3.1) Standard B Where Used Std. Ctn. Qty. CCS12-S8-C CCS25-S10-C A Packaging* Std. Pkg. Qty #8 (M4) Screw #10 (M5) Screw #8 (M4) Screw .11 (2.6) Nylon 6.6 .20 (5.1) Natural Indoors #10 (M5) Screw CCH75-S10-C .75 (19.1) .79 (19.9) 100 500 500 5000 CCH81-S10-C .81 (20.7) .81 (20.7) 100 500 500 5000 CCH87-S10-C .87 (22.2) .85 (21.5) 100 500 500 5000 CCH100-S10-C 1.00 (25.4) .91 (23.1) 100 500 500 5000 CCH112-S10-C 1.13 (28.6) .97 (24.6) -- -- 100 500 CCH119-S10-C 1.19 (30.2) 1.00 (25.4) -- -- 100 500 CCH125-S10-C 1.25 (31.8) 1.06 (26.9) -- -- 100 500 CCH138-S10-C 1.38 (34.9) 1.13 (28.6) -- -- 100 500 CCH150-S10-C 1.50 (38.1) 1.19 (30.2) -- -- 100 500 .13 (3.1) *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantity (except CCH112 through CCH150). For Bulk package part numbers, see page 137-138. Most commonly used parts appear in BOLD. 117 Cable and Wire Mounting Devices Tension Wire Retainers Wires slide into the clip and are held in place by tension. 1.44" (36.5) .38" (9.5) .36" (9.1) .06" (1.5) .38 RAD (9.5) .56" (14.2) Packaging* Part Number Bundle Diameter in. (mm) Dimensions in. (mm) TWR-C .38 (9.5) TWR-C0 See Drawing Tack Clips Where Used Material Color Nylon 6.6 Natural Indoors Weather Resistant Nylon 6.6 Black Indoors/ Outdoors Mounting Method #6 (M3) Screw Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. 100 1000 1000 5000 100 1000 -- -- Used for securing wire, cable and tubing to nailable surfaces. The clips are furnished with a single integral zinc plated, hardened steel nail to help speed installation. B C A A TYPE S (SINGLE) TYPE D (DOUBLE) Dimensions in. (mm) Bundle Capacity in. (mm) Packaging* Coaxial Cross RG# Where Used Mounting Method Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. Part Number Type A B C TC3-5-C100 S .13 dia. (3.5) .20 (5.1) .29 (7.4) .23 (5.8) 187 -- -- 100 1000 TC5-7-C100 S .21 dia. (5) .31 (7.9) .39 (9.9) .23 (5.8) 58 -- -- 100 1000 TC7-10-C100 S .26 dia. (6.5) .38 (9.7) .49 (12.5) .35 (8.9) 59 -- -- 100 1000 .36 dia. (9.2) .51 (13) .59 (14.9) .45 (11.4) 6A -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 TC10-14-C100 S Material Color Nail is hammered into a nailable surface such as wood or mortar joints. Do not use on concrete or brick. TC14-20-C100 S .49 dia. (12) .67 (17) .79 (20.6) TC5x8-C100 D .20 x .30 (5 x 8) .30 (8.8) .54 (13.7) Weather .54 8A, 9B, 11 Indoors/ Resistant Black (13.7) Outdoors Polypropylene .27 -- (6.8) TC6x10-C100 D .23 x .37 (6 x 9.5) .34 (8.6) .62 (15.7) .34 (8.6) -- TC7x14-C100 D .26 x .46 (7 x 12) .36 (9.1) .70 (17.8) .43 (10.9) -- -- -- 100 1000 TC9x18-C100 D .38 x .65 (10 x 17) .50 (12.7) .89 (22.6) .52 (13.2) -- -- -- 100 1000 118 Most commonly used parts appear in BOLD. *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. Cable and Wire Mounting Devices Siding Clips Attaches coax cable to buildings having "Pittsburgh Interlok" type aluminum or steel siding. Will not corrode or stain siding. Low profile, installs without drilling or nailing. A C A B D C B D HSC Horizontal Clip VSC Vertical Clip Horizontal Siding Clip Part Number Vertical Siding Clip Max. Cable Dia. in. (mm) Dimensions in. (mm) A B C Packaging* D HSC.25-L HSC.25-L100 VSC.25-L VSC.25-L100 .50 (12.7) .71 (18.0) .34 (8.6) .37 (9.4) 1.26 (31.8) .98 (25.0) 1.00 (25.4) .70 (17.8) .25 (6.4) Material Color Nylon 6.6 White Weather Resistant Polypropylene Black Nylon 6.6 White Weather Resistant Polypropylene Mounting Method Attach to Siding Std. Pkg. Qty. Std. Ctn. Qty. 50 500 50 500 50 500 50 500 Black *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. Most commonly used parts appear in BOLD. 119 Cable and Wire Mounting Devices Wire Standoffs For retaining wires, cable, components or tubing away from panel or conductive chassis. Finger grip flanges can be easily locked or unlocked for revisions. Hand installed in pre-drilled hole. A Max. Dia. (when closed) Easy to install and use. 2. Load wires, cables, etc. 1. Press wire standoff through pre-drilled hole in panel. 3. Press top flanges together to lock. B Dimensions in. (mm) Part Number WS25-25-C WS25-50-C WS25-75-C WS35-25-C WS35-50-C WS35-75-C WS50-25-C WS50-50-C WS50-75-C WS75-25-C WS75-50-C WS75-75-C A .25 (6.4) .25 (6.4) .25 (6.4) .35 (8.9) .35 (8.9) .35 (8.9) .47 (11.9) .47 (11.9) .47 (11.9) .78 (19.8) .78 (19.8) .78 (19.8) B .25 (6.4) .50 (12.7) .75 (19.1) .25 (6.4) .50 (12.7) .75 (19.1) .25 (6.4) .49 (12.7) .75 (19.1) .25 (6.4) .50 (12.7) .75 (19.1) Panel Dimensions in. (mm) Panel Thickness Hole Diameter .03 to .08 (0.7 to 2.0) .19 to .20 (4.7 to 4.9) Packaging* Material Where Used Color Nylon 6.6 Natural Indoors Mounting Method Inserted into Pre-Drilled Hole Std. Pkg. Qty. 100 Std. Ctn. Qty. 1000 Bulk Pkg. Qty. -- Bulk Ctn. Qty. -- 100 1000 -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 -- -- 100 1000 1000 5000 100 1000 1000 5000 100 1000 1000 5000 The clips hold wire bundles securely. Clips are placed on the bundle then attached to the panel. Designed for pre-drilled holes. Snap-In Clips B A Part Number SICH25-C SICH38-C SICH50-C SICH75-C SICH100-C SICH150-C 120 Max. Bundle Dia. in. (mm) .25 (6.4) .38 (9.6) .50 (12.7) .75 (19) 1.00 (25.4) 1.5 (38) C Dimensions in. (mm) A .82 (20.9) .98 (24.6) 1.11 (26.2) 1.40 (35.6) 1.65 (41.9) 2.15 (54.6) B .34 (8.6) .50 (12.8) .62 (15.7) 1.0 (25.4) 1.25 (31.8) 1.75 (44.5) Most commonly used parts appear in BOLD. Panel Dimensions in. (mm) Material C .40 (10.2) .54 (13.7) .67 (17.0) Nylon 6.6 .96 (24.4) 1.21 (30.7) 1.71 (43.4) Color Natural Where Used Indoors Maximum Hole Thickness Diameter .10 (2.5) .25 (6.4) Packaging* Mounting Method Inserted into Pre-Drilled Hole Std. Pkg. Qty. 100 Std. Ctn. Qty. 1000 Bulk Pkg. Qty. 1000 Bulk Ctn. Qty. 5000 100 1000 1000 5000 100 1000 1000 5000 100 1000 1000 5000 100 1000 -- -- 100 1000 -- -- *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. Cable and Wire Mounting Devices Wire Saddles Funnel entry design for fast insertion of wires and cables. Used in pre-drilled holes. B B A A VWS Vertical Part Number VWS4218-C VWS4238-C VWS4274-C VWS42105-C HWS2819-C Max. Bundle Capacity in. (mm) .18 x .42 (5 x 11) .40 x .42 (10 x 11) .74 x .42 (19 x 11) 1.05 x .42 (27 x 11) .19 x .28 (5 x 7) Dimensions in. (mm) A .58 (14.7) .78 (19.8) 1.14 (29.0) 1.45 (36.8) .42 (10.7) Harness Clips HWS Horizontal Panel Dimensions in. (mm) B .60 (15.2) .60 (15.2) .60 (15.2) .60 (15.2) .44 (11.2) Material Color Nylon 6.6 Natural Where Used Packaging* Std. Panel Hole Mounting Pkg. Thickness Diameter Method Qty. 100 Std. Ctn. Qty. 500 Bulk Pkg. Qty. 1000 Bulk Ctn. Qty. 5000 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 100 500 1000 5000 .03-.08 (.79 - 2.0) Indoors .19 (4.7) Inserted into Pre-Drilled Hole Integral "spring" holds wire bundles tightly. Used in pre-drilled holes. Vertical, horizontal, and edge mount versions available. 0.17 (4.4) 0.157 (4) C C 0.433 (11) A A A B B Vertical HCMP06B12 Part Number HCMP06B12-C20 HCMP06C12-C20 HCME06A12-C130 Max. Bundle Dia. Range in. (mm) .24-.47 (5.9-2.5) Dimensions in. (mm) A 1.25 (31.8) 1.10 (27.9) .59 (15.0) B .74 (18.8) .80 (20.2) .74 (18.7) B Panel Dimensions in. (mm) C Material Color .39 (10) Nylon 6.6 .39 (9.9) Acetal Where Maximum Hole Used Thickness Diameter Black Indoors .11 (2.7) .25 (6.4) -- -- *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. C Edge Mount HCME06A12 Horizontal HCMP06C12 Packaging* Mounting Method in. (mm) Inserted into Pre-Drilled Hole See Drawing Std. Pkg. Qty. 100 Std. Ctn. Qty. 500 Bulk Pkg. Qty. 1000 Bulk Ctn. Qty. 5000 100 500 1000 5000 100 500 5000 10000 Most commonly used parts appear in BOLD. 121 Cable and Wire Mounting Devices Wire Bundle Strap Wire Bundle Strap provides a quick, durable and inexpensive way to contain wire, cable and tubing. It can be installed on wood, plywood, masonry and other surfaces using standard fasteners. D (Dia) A B 4.82 (122.56) REF. C Part Number WBS6-Q Bundle Retaining Area in2 Material Color 6 ABS Natural Circuit Board Posts A 1.00 (25.4) Dimensions in. (mm) B C 3.92 2.54 (99.6) (64.5) D .25 (6.35) Mounting Method Std. Pkg. Qty.* Std. Ctn. Qty. 1/4 (M6) Screw 25 125 For board-to-board or board-to-chassis mounting. Posts snap into pre-drilled holes. Bell flange on bottom end provides greater stability. .170 (4.3) .187 Dia. (4.7) .140 (3.6) .282 (7.2) A .140 (3.6) Dimensions in. (mm) Packaging* Where Used Mounting Method in. (mm) Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. Standoff Height A CBP12-C .125 (3.2) .405 (10.3) 100 1000 1000 5000 CBP25-C .250 (6.4) .530 (13.5) 100 1000 1000 5000 CBP31-C .312 (7.9) .592 (15.0) 100 1000 1000 5000 CBP37-C .375 (9.5) .655 (16.6) 100 1000 1000 5000 CBP50-C .500 (12.7) .780 (19.8) 100 1000 1000 5000 CBP62-C .625 (15.9) .905 (23.0) 100 1000 1000 5000 CBP75-C .750 (19.1) 1.030 (26.2) 100 1000 1000 5000 CBP87-C .875 (22.2) 1.155 (29.3) 100 1000 1000 5000 CBP100-C 1.00 (25.4) 1.280 (32.5) 100 1000 1000 5000 Part Number 122 Most commonly used parts appear in BOLD. Material Nylon 6.6 Color Natural Indoors For Circuit Boards or Chassis: .062 (1.5) thick with .158 (4.0) diameter mounting holes *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. Circuit Board Posts/Supports Circuit Board Locking Supports For board-to-chassis support. Snap-in design for fast assembly. Wing design on chassis mounting provides constant tension and stability. Dimensions in. (mm) Standoff Height A CBLS18-C .187 (4.7) .92 (23.4) CBLS25-C .250 (6.4) .98 (24.9) CBLS37-C .375 (9.5) 1.11 (28.2) CBLS50-C .500 (12.7) 1.23 (31.2) CBLS62-C .625 (15.9) 1.35 (34.3) CBLS75-C .750 (19.1) 1.48 (37.5) Part Number Packaging* Material Nylon 6.6 *Order the number of pieces required in multiples of packaging quantities. Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. Color Natural Where Used Indoors Mounting Method in. (mm) Std. Pkg. Qty. Std. Ctn. Qty. Bulk Pkg. Qty. Bulk Ctn. Qty. For Circuit Boards: .062 (1.5) thick with .158 (4.0) diameter mounting holes 100 500 1000 5000 100 1000 1000 5000 100 1000 1000 5000 100 1000 1000 5000 100 1000 1000 5000 100 1000 1000 5000 For Chassis: .03 (.79) to .08 (2.0) thick with .185 (4.7) to .193 (4.9) diameter mounting holes Most commonly used parts appear in BOLD. 123 Harness Board Accessories Harness Board Accessories PANDUIT (R) harness board accessories provide fast routing and forming of wires in harness fabrication. They hold the wires off the harness board at a uniform height for easy application of cable ties. The accessories are designed for use with various PANDUIT (R) cable tie installation tools. The Low accessories are used with hand-operated tools. The High accessories are used with the automatic tools. To maintain the harness at a uniform height of approx. 1.33" (33.8mm) (at the center of the harness) above the board, use RER Elastic Retainers, BR.75-E6 (or BR.5-E6), CPH.75-S8, TJF and SHH1-S8 or SHH3-S8 harness board accessories. This height is suitable for use with the PAT1M Fully Automatic Cable Tie Installation system (page 60). Wire Retainers -- RER Type Replaceable Elastic Retainers As wires are individually inserted, the bundle is formed. When harness is complete, it can be easily snapped out. Three sizes available for 1/2" (12.7mm), 3/4" (19.0mm) and 2 1/4" (31.8mm) bundles. Replacement Elastic B For economy, the elastic band can be replaced in the RER Elastic Retainers without removing the RER base. Part Number A Pkg. Qty. RER.5E-X RER.75E-X RER1.25E-X C 10 10 10 E D Part Number RER.5-S6-X RER.75-S6-X RER1.25-S6-X Max. Dia. in. (mm) .50 (12.7) .75 (19.0) 1.25 (31.8) Dimensions in. (mm) A 1.89 (48.0) 2.21 (56.1) 2.86 (72.6) ER Type Elastic Retainers B .84 (21.3) 1.12 (28.4) 1.64 (41.7) C D .14 (3.6) .14 (3.6) .14 (3.6) .18 (4.7) Color & Material E 1.18 (30.0) Black Nylon 6.6 and White Acetal Mounting Method #6 (M3) Screw Std. Pkg. Qty.* 10 Std. Ctn. Qty. 50 10 50 10 50 ER Type retainers form wire bundles as wires are inserted. Completed bundles then snap out. Two sizes available for 1/2" (12.7) and 1 1/4" (31.7) bundles. B A D C E Part Number ER.5-E4-X ER1.25-E4-X 124 Max. Dia. in. (mm) .50 (12.7) 1.25 (31.8) Dimensions in. (mm) A 1.00 (25.4) 2.00 (50.8) B 1.00 (25.4) 2.40 (61.0) C D .13 (3.2) .12 (3.0) E 1.96 (49.8) 2.90 (73.7) Color & Material Black Nylon 6.6 and ABS Mounting Method #4 (M2.5) Screws Std. Pkg. Qty.* 10 Std. Ctn. Qty. 100 10 100 *Order the number of pieces required in multiples of package quantities. Most commonly used parts appear in BOLD. Harness Board Accessories Bundle Retainers Spring fingers with large lead in facilitate fast routing of wires and easy removal of completed harness. Overlapping feet on the BR.5 and BR.75 allow the retainers to be butted together for wire breakouts. Three sizes available for 1/2" (12.7mm), 3/4" (19.0mm) and 2.00" (50.8mm) bundles. D BR.5 and BR.75 BR2 BR2-1.3 D D B A C B C A B A C Part Number BR.5-E6-C BR.75-E6-C Max. Dia. in. (mm) .50 (12.7) .75 (19.0) BR2-1.3-X BR2-1.3-A-X BR2-1.5-X BR2-4-X Dimensions in. (mm) A 1.07 (27.2) .95 (24.1) 1.32 (33.5) 2.00 (50.8) BR2-6-X 1.59 (40.4) 4.00 (101.6) 6.00 (152.4) B C .44 (11.2) .78 (19.8) 2.25 (57.2) 2.50 (63.5 2.18 (55.4) Corner Posts 2.56 (65.0) D .55 (14.0) .76 (19.4) Color & Material Packaging* Std. Std. Pkg. Ctn. Qty Qty. 100 500 Mounting Method (2) #6 (M3) Screws Black Acetal (2) 1/4 (M6) Screws Rubber Adhesive 2.0 lbs (907g) Static Load 2.12 (54.0) (2) 1/4 (M6) Screws 100 500 10 10 100 100 10 100 10 100 10 100 Designed to pre-form tight bundles at harness corners and breakouts. The top arm pivots for easy removal of completed harness. CPH Corner Post, High CPL Corner Post, Low .172" Dia. Hole (4.4) .172" Dia. Hole (4.4) A C A D C E E B Dimensions in. (mm) Part Number Max. Dia. in. (mm) CPH.75-S8-X CPL.75-S8-X .75 (19.0) A 1.88 (47.8) 1.08 (27.4) B 1.60 (40.8) 1.52 (38.6) C 1.35 (34.4) .56 (14.2) D .90 (22.9) .88 (22.4) E 1.18 (30.0) 1.11 (28.2) D Color & Material Black Nylon 6.6 Mounting Method B Packaging* Std. Std. Pkg. Ctn. Qty* Qty. 10 100 (2) #8 (M4) Screws 10 100 *Order the number of pieces required in multiples of package quantities. Most commonly used parts appear in BOLD. 125 Harness Board Accessories T-Junction Fixture Using an integrated harness board nail, the T-Junction Fixture moves to form harnesses. When the harness is complete, the fixture can be pushed down for easy harness removal. E (Dia) A B In the "up" position to form harness. Part Number TJF-X C In the "down" position to tie and remove harness. D Max. Bundle Dia. in. (mm) A B C D 1.34 (34.0) .75 (19.0) .12 (3.0) 1.39 (35.1) .70 (17.8) Dimensions in. (mm) Wire End Holder E Color & Material Mounting Method 1.12 (28.4) Black Nylon 6.6 and Nickel Plated Steel Integral Nail Secures wire ends with or without terminations while harness is being fabricated. Wires can be easily added or removed from the top, but will hold the wire from axial movement. Used with #28 through #16 AWG wires. Std. Pkg. Qty.* Std. Ctn. Qty. 10 100 .16 (4.1) E D C A F B Dimensions in. (mm) Part Number WEH-E8-C A B C D E F Color & Material 1.22 (31.0) .37 (9.4) .77 (20.0) .53 (13.5) .29 (7.4) .18 (4.6) Black Acetal Harness Board Nails Mounting Method (2) #8 (M4) Screws Std. Pkg. Qty.* Std. Ctn. Qty. 100 1000 Speeds routing of wires. All of the nails have a uniform driving depth insured by a collar stop. Smooth finish on the nails, will not abrade wire jackets. C Dia. B A D Dimensions in. (mm) Part Number Material Std. Pkg. Qty.* Std. Ctn. Qty. A B C HBN.75-T 1.40 (35.6) .75 (19.0) .075 (1.9) 200 1000 HBN1-T 1.65 (41.9) 1.00 (25.4) .075 (1.9) 200 1000 HBN1.5-T 2.15 (54.6) 1.50 (38.1) .084 (2.1) 200 1000 HBN2-T 2.65 (67.3) 2.00 (50.8) .093 (2.4) 200 1000 HBN2.5-T 3.17 (80.5) 2.50 (63.5) .107 (2.7) 200 1000 HBN3-T 3.67 (93.2) 3.00 (76.2) .122 (3.1) 200 1000 HBN4-T 4.67 (118.6) 4.00 (101.6) .142 (3.6) 200 1000 126 D Mounting Method .62 (15.8) Nickel Plated Steel Hammered into harness board *Order the number of pieces required in multiples of package quantities. Most commonly used parts appear in BOLD. Harness Board Accessories Fanning Strip System Assures that wires are held in a particular orientation in sophisticated wiring harnesses. Consists of fanning strip and fanning strip holder. Contains evenly spaced "snap slots" to hold wires in place. No sharp edges to damage wire insulation. Becomes part of the wiring harness. Will accept wires up to 18 AWG. Used with FSH40 or FSHH holders. Fanning Strip (FS156) Fanning Strip Holders Low Holder (FSH40-X) High Holder (FSHH-X) E F Used in conjunction with RER.75-S6, BR.75-E6 (BR.5-E6) and CPH.75-S8. Ideal for use with PAT cable tie tool. B C D A Dimensions in. (mm) A B C D E F Color & Material FS156-C 12.1 (307.3) .31 (7.9) .04 (1.0) .12 (3.0) .156 (4.0) .06 (1.5) Natural Nylon 6.6 Fanning Strip Holder FSH40-X 6.0 (152.4) .62 (15.7) .56 (14.2) 1.50 (38.1) .75 (19.0) .04 (1.0) 3.2 (81.3) 1.4 (36.0) .60 (15.2) 1.10 (28.0) .53 (13.5) .04 (1.0) Black ABS #8 (M4) Screws Part Number FSHH-X Mounting Method Std. Pkg. Qty.* 100 10 10 *Order the number of pieces required in multiples of packaging quantities. Most commonly used parts appear in BOLD. 127 Harness Board Accessories Spring Wire Breakout System Separates and holds wires in a harness while the rest of the harness is being formed. The wires simply pull out from the spring when the harness is complete. SHH Spring Holder PBSC Spring Wire Breakout .188" Dia. (4.8) Each SHH Spring Holder is supplied with (1) rigid wire piece to hold the spring laterally and two #8 (M4) 2" (50.8) hex head wood screws. Two sizes available for use with PBSC1 and PBSC6. B A C A B Dimensions in. (mm) Part Number A PBSC1-X 1.00 (25.4) PBSC3-X 3.00 (76.2) PBSC6-X 6.00 (152.4) PBSC12-X 12.00 (304.8) SHH1-S8-X 1.85 (47.0) SHH3-S8-X 128 6.85 (174.0) B .44 (11.2) 1.30 (33) Packaging* C -- .53 (13.4) Material in. (mm) .035 (.9) Thick Steel Nylon 6.6 Color -- Black Mounting Method Std. Pkg. Qty. Std. Ctn. Qty. Used with SHH1 Spring Holder 10 100 (2) #8 (M4) Screws 10 100 Used with SHH3 Spring Holder 10 100 (2) #8 (M4) Screws 10 100 (2) #8 (M4) Screws used with PBSC1 10 100 (2) #8 (M4) Screws used with PBSC3 or PBSC6 10 100 *Order the number of pieces required in multiples of packaging quantities. Most commonly used parts appear in BOLD. Harness Board Accessories Harness Board Standoff Posts Used to hold a push mount accessories or a push mount cable tie at a specific location on a harness board. The Standoff Post is placed over a hole in the harness board, a bolt is then threaded into the bottom of the standoff from the backside of the board and tightened. Push mount accessories are inserted into the top of the Standoff Post prior to assembly. When the assembly is complete, the harness and the attached push mount are removed from the Standoff Post. B C (Dia) A Packaging* Dimensions in. (mm) Part Number HB2SP19-X HB4SP19-X HB6SP19-X HB2SP25-X HB4SP25-X A 2.00 (50.8) 4.00 (101.6) 6.00 (152.4) 2.00 (51) 4.00 (101.6) B C Used With Part Numbers .20 (5.2) PLWP, PRWP, WS, VWS, HWS, TPM .50 (12.7) Material Aluminum .295 (7.5) PLWP, PRWP, PLP, THMS, HCMP, PMCC Mounting Method 1/4 (M6) Screw Std. Pkg. Qty. 10 Std. Ctn. Qty. 100 10 100 10 100 10 100 10 100 *Order the number of mounts required in multiples of package quantities. Most commonly used parts appear in BOLD. 129 Communication Cable Management The product is designed with rounded edges for routing fiber optic cables. This feature provides a very smooth surface to eliminate the potential for snagging and putting stress on the fiber optic cable. Optical Fiber Network Saddles B B C A C A D D VWSDC Dual Capacity Type VWS Push Mount Type Part Number VWS106-C VWS106-C20 VWSDC-C Max. Bundle Dia. in. (mm) 1.06 (26.9) Dimensions in. (mm) A 1.65 (41.7) 2.64 (66.8) Panel Dimensions in. (mm) B C 1.18 1.30 (29.9) (31.8) 1.26 2.36 (32.0) (59.9) Waterfall Accessories D .34 (8.6) .39 (9.9) Material Nylon 6.6 Color Natural Black Natural Where Used Indoors Packaging* Mounting Maximum Hole Method Thickness Diameter in. (mm) .09 (2.3) .187 (4.7) Std. Pkg. Qty. 100 Inserted 100 into Pre-Drilled 100 Hole Std. Ctn. Qty. 500 500 1000 Bulk Pkg. Qty. 1000 1000 500 Bulk Ctn. Qty. 5000 5000 2500 PANDUIT (R) Waterfall Accessory provides bend radius control in both vertical and horizontal directions when transferring cables from standard ladder rack. Installs easily to the rung or a stringer of the ladder rack with PANDUIT (R) PLT series cable ties, provided in every package. PANDUIT (R) Waterfall Accessories are part of a complete cable management system. CMWB-Waterfall Base CMW-Kit CMWW-Waterfall Wing Packaging* Part Number CMW-KIT CMW-KIT10 CMWB CMWB10 CMWW CMWW10 130 Bend Radius Limit in. (mm) Material Black -- 1.75 (44.45) 1.0 (25.4) Color Glass Filled Flame Retardant Nylon 6.6 Most commonly used parts appear in BOLD. White Black White Black White Width in. (mm) Height in. (mm) 9.60 (243.8) 6.07 (154.18) One Base, Two Wings, and Three Cable Ties. 5.24 (133.1) 3.07 (77.98) One Base and Three Cable Ties. 2.00 (50.6) 4.87 (123.7) One Bend Radius Control Wing. Included in Package Std. Pkg. Qty.* Std. Ctn. Qty. 1 10 *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantity. For Bulk package part numbers, see page 137-138. Communication Cable Management Stackable Cable Rack Spacers PANDUIT (R) Stackable Cable Rack Spacers separate and support cable on standard ladder racks. This product prevents pinch points between the bottom row of cable and the ladder rack rung as a result of the weight of multiple cable layers applied on top of each other. Maximize rack space by stacking products for maximum cable capacity. CRS1 & CRS1-125 CRS4-125 CRS6 Packaging* Part Number Cable Bundles CRS4-125-X 4 CRS1-125-X 1 CRS6-X 6 CRS1-X 1 Bundle Diameter in. (mm) 1.25 (31.75) Material Color Polycarbonate/ABS Blend Vertical D-Rings Width in. (mm) 5.24 (133.1) Glass Filled Flame Retardant Nylon 6.6 Black 0.8 (20.32) Mounting Method Stack Height in. (mm) Standard Cross Section Cable Ties Std. Std. Pkg. Ctn. Qty. Qty. 1.42 (36.07) 1.55 (39.4) 10 5.25 (133.35) 100 1.00 (25.4) 1.13 (28.58) The PANDUIT (R) Vertical D-Ring provides open access cable management. The front arm of the D-Ring rotates 90 to allow entire cable bundles to be inserted. Screw holes are spaced according to EIA standards and allow for installation on standard equipment racks. B C E A B C A D D 8.25 (REF) E CMVDR1, CMVDR1S CMVDR2, CMVDR2S CMVDRC Dimensions in. (mm) Part Number A CMVDR1 4.80 (121.9) CMVDR1S 2.4 (60.9) CMVDR2 4.80 (121.9) CMVDR2S 2.40 (60.9) CMVDRC 4.72 (119.88) B 1.18 (30.0) 2.40 (60.9) 5.09 (129.29) C 5.72 (145.2) 3.26 (82.8) 5.72 (145.2) 3.26 (82.8) 5.66 (143.64) Packaging* D E Material Color Flame Retardant Polycarbonate Black Mounting Method Std. Pkg. Qty. Std. Ctn. Qty. 1 10 2.05 (52.07) 1.75 (44.45) 3.30 (83.82) 8.75 (222.25) (2) 1/4 (M6) Screws 1.12 (28.58) *Order the number of pieces required in multiples of package quantities. Most commonly used parts appear in BOLD. 131 Communication Cable Management Threaded Rod Cover PANDUIT (R) Threaded Rod Cover protects cables from abrasion caused by contact with threaded rod. * Manufactured from material that meets UL94V-0 specifications * Soft material for easy installation * Available in 18" lengths Packaging* Part Number TRC18FR-X8 For Threaded Rod Size in. (mm) 1/2 to 5/8 (12.7) to (15.88) TAK-TY (R) Hook & Loop Cable Tie Mounts Material Color Std. Pkg. Qty. Flame Retardant Polyethylene Gray 10 Std. Ctn. Qty. 100 Mounting base for use with 3/4" TAK -TY (R) Hook & Loop Cable Ties * For indoor use only 1.10 (27.94) .142 1.10 (27.94) .87 (22.10) .34 (8.64) .11 (2.79) .68 (17.27) Packaging* Part Number Used with Cable Ties ABMT-A-C Rubber Adhesive ABMT-A-C20 ABMT-S6-C ABMT-S6-C20 Mounting Method TAK -TY ! Hook & Loop Cable Ties Maximum Static Load lbs. (g) Color Nylon 6.6 ABMT-S6-C69 -- 100 1000 Black Natural Black #6 (M3) Screw Std. Ctn. Qty. Natural .38 (172) (R) ABMT-S6-C60 Material Std. Pkg. Qty. Flame Retardant Nylon 6.6 Black Natural !Used with all PANDUIT (R) HLC/HLT/HLS and HLM TAK-TY (R) options found on page 40. 132 Most commonly used parts appear in BOLD. *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantities. For Bulk package part nu mbers, see page 137-138. Communication Cable Management Flat PAN -POST TM Standoff Used to secure cable in vertical or horizontal configurations. Mounting hole configuration meets EIA/TIA specifications for use on racks or in enclosures. .61 (15.5) .61 (15.5) REF .28 (7.2) 1.50 (38.1) REF .75 (19.0) .26 (6.6) 1.62 (41.3) REF .40 (10.2) TYP 1.38 (34.9) .37 (9.4) TYP .19 (4.8) REF .19 (4.8) REF 5.60 (142.2) 5.50 (139.7) PPF2S Part Number PPF2S-S25-V PPF2S-S25-V69 PPF2SV-S25-V PPF2SV-S25-V69 Used With Cable Ties** Packaging* Color & Material Std. Pkg. Qty. Std. Ctn. Qty. Natural Nylon 6.6 5 50 Natural Flame Retardant Nylon 6.6 5 50 5 50 5 50 Dimensions in. (mm) M, I, S M, I, S, HS, LH, H, HLM! PPF2SV See Drawing Mounting Method Natural Nylon 6.6 (2) 1/4 (M6) Screws Natural Flame Retardant Nylon 6.6 !Used with all PANDUIT (R) Hook & Loop Cable Ties found on page 40. Communication Cable Management Kit for Cabinets Kit of wire management accessories specifically designed for use in a network cabinet or enclosure. Kit includes the following: * TAK -TY (R) Hook & Loop cable tie (HLM-15R0)/1 roll * Nylon Cable tie (ILT3S)/24 pieces * Adhesive backed mounts (ABM3H-A and ABM112-A) 6 pieces each * Flat Post Standoff (PPF2S-S25)/8 pieces * Push mount (PWMS-H25)/6 pieces * Vertical wire saddle (VWS106)/4 pieces Packaging* Part Number CCMKIT1 *Order the number of pieces required in multiples of package quantities. Part numbers listed are for standard materials in standard package quantities. For Bulk package part numbers, see page 137-138. **Cable Tie Cross Section Sizes: M = Miniature, I = Intermediate, S = Standard, HS = Heavy Standard, LH = Light-Heavy and H = Heavy. Std. Pkg. Qty. 1 Std. Ctn. Qty. 100 Most commonly used parts appear in BOLD. 133 Selection and Use of Adhesive Mounts General Introduction PANDUIT (R) adhesive mounts provide a quick, economical and dependable method of supporting, routing and protecting wires or cables. Some are used with PANDUIT (R) cable ties and others can be used without cable ties. Adhesive backed mounts adhere to a variety of surfaces. This alternative to mechanical fasteners offers the advantage of lower installed cost with safe, easy to use, quality products. Applications * * * * * To route wires in control panels and switchboards To support bundles of wires away from moving mechanical devices Routing and harnessing cables, both indoors and out, to prevent safety hazards To organize flat cables in many locations with low profile construction Ideal for supporting wire bundles where holes cannot be put into the substrate * To separate groups of wires for identification Markets * * * * * Original Equipment Manufacturers (OEM) Construction Industry Telecommunication Systems CATV Aerospace Industry * * * * * Utilities Electronic Components Transportation Industry Appliance Manufacturers Maintenance and Repair Operations (MRO) General Mount Guidelines PANDUIT (R) pressure sensitive adhesive (foam tape) mounts are intended to secure wire bundles or other light objects to smooth surfaces. These mounts are not designed to support excessive loads and should not be used when the maximum expected load exceeds the rated capacity of the mount. Choosing the Right Adhesive PANDUIT (R) offers two standard pressure sensitive foam tapes which are available on most adhesive backed wiring accessories products. The general purpose tape is produced with a rubber based adhesive and is identified by an "-A" in the part number. This tape develops its strength extremely fast and can be used in environments with temperatures ranging from -20F to +120F. It is recommended that rubber based adhesive mounts dwell 2 hours after installation, prior to loading. Rubber based adhesive tape is the best choice for most adhesive mount applications, including powder coated surfaces. Acrylic based adhesive tape is also available and is identified by an "-AT" in the part number. This tape is for use in environments where continuous exposure to temperatures as high as 180F is possible. Acrylic based adhesive develops its maximum strength over a longer period of time than rubber based adhesive. It is recommended that acrylic adhesive mounts dwell 8 hours after installation, prior to loading. Acrylic based adhesive tape is a good choice for environments with prolonged exposure to UV rays or temperatures above 120F. PANDUIT (R) also offers a two-part epoxy for use in applications where excessive loading is required, or where the surface to which the mount must be applied is porous rather than smooth. This adhesive is formulated specifically for use on PANDUIT (R) mounts, and is packaged in pre-measured cups to insure the proper ratio of resin and hardener are mixed, eliminating wasted epoxy. 134 Most commonly used parts appear in BOLD. Selection and Use of Adhesive Mounts Application Chart Since PANDUIT (R) manufactures adhesive backed mounts with a variety of adhesive types, this chart should be used as a guideline for choosing the best adhesive for often-encountered conditions. Each type of adhesive is rated good, fair or poor for some specific mounting surfaces and/or chemical environments. Mount Spacing To determine the number of mounts to use in a given application, the following formula can be used as a guideline: Cable or weight (lbs./ft.) Static Load rating of Mount (lbs/mt.) Surfaces Plastics Wood Glass Painted Surfaces Powder Coating Metal Paper Concrete, Stone, Masonry Rubber Based Acrylic Based Epoxy Applied Foam Tape Mounts Foam Tape Mounts Adhesive Mounts Good Good Fair Good Good Good1 Good Not Recommended Good Good Good Good Fair Good1 Good Not Recommended Good Good Good Fair Good Good Fair Good Good Poor Poor Poor Good Poor Not Recommended Good Fair3 Fair3 Fair3 Fair3 Fair3 Good Poor Good Fair Fair Fair Not Recommended Good2 Chemical Resistance Water Oil Gasoline Dilute Acids Dilute Alkalis Organic Solvents Outdoor Exposure 1. Not recommended for use on copper or brass. 2. Mounts manufactured from outdoor material only. For specific applications, individual testing prior to extensive use is suggested. 3. Depends on concentration, exposure time and chemical composition. = Spacing Mounts Ft. For specific applications we recommend individual testing prior to production use. Surface Preparation For best results, PANDUIT (R) adhesive mounts should be applied to clean, dry, grease-free surfaces. We recommend that the surface be cleaned prior to mount installation. For rubber and acrylic based foam tape adhesives, a blend of isopropyl alcohol and water 50/50 may be used to clean most surfaces. For epoxy type adhesives, especially masonry surfaces, be sure to clean all loose particles away before mount installation. Some surface abrasion is recommended to achieve maximum strength. A light rubbing with medium grit emery cloth or sandpaper is best. Wash after abrading. Proper Installation Techniques For Pressure Sensitive Adhesive Mounts For proper installation of adhesive mounts with foam tape, simply remove the release liner and place the mount in the desired location. Avoid touching the adhesive prior to positioning the mount. Apply firm pressure to the mount for 5 seconds to insure proper adhesion. 12 3 9 Alcohol 6 Clean surface with a clean cloth and isopropyl alcohol. Allow surface to air dry. Remove the release liner, being careful not to touch the adhesive. Apply full thumb pressure for at least 5 seconds. Allow mount to properly dwell. Epoxy Adhesive Mounts PANDUIT (R) EMA adhesive is a two-part epoxy cement which is packaged in convenient mixer cups containing an equal amount of resin and hardener. Peel the protective covering off and pop the center of the cup in to form a mixing bowl. Each cup is supplied with a mixer stick and contains enough epoxy to properly apply three EMS mounts. The resin and hardener should be thoroughly mixed together until the epoxy is a consistent and uniform color. The mixer stick can then be used to apply the adhesive to the mount. The epoxy should be forced into the grooves on the bottom of the mount to obtain optimum bond performance. The mount should be applied to the surface with light pressure and a back-and-forth twisting motion. Hardening of the epoxy begins five minutes after mixing at room temperature. Most commonly used parts appear in BOLD. 135 Selection and Use of Adhesive Mounts Proper Storage Conditions All PANDUIT (R) adhesive products have an expiration date printed on the package label. Use the following storage guidelines: 1. For rubber and acrylic based foam tape adhesives, store in temperatures of 70F (21C) and 45% Relative Humidity (R.H.). 2. For epoxy type adhesives, store in temperatures of 40F (4C) to 75F (25C) and relative humidity not in excess of 45%. Storage in opened containers is not recommended. Using the guidelines above, the shelf life of foam tape is 3 years. Shelf life of epoxy is 1 year. Deviation from the recommended storage conditions may reduce the shelf life or adhesive strength. In any case, adhesive products should never be stored near heating vents or other heat sources, and storage in lower temperatures than those recommended may increase the shelf life. Stock Rotation Best-If-Used-By Date Quality Control Number Adhesive mount inventory should be rotated in order to insure the quality of the adhesive foam tape. Each package of PANDUIT (R) adhesive backed mounts has a Quality Control Number and a best-if-used-by date on the package label. The best-if-used-by date provides the customer with an accurate way to control the rotation of inventory, and, as is the case with all PANDUIT (R) products, the Quality Control Number provides complete traceability for all components that go into a specific production run of product. Mount Removal There is no simple or easy method for removing PANDUIT (R) adhesives. A thin wire or razor blade can be moved in between the surfaces when removing foam tape mounts; however, the adhesive residue will remain on the surface. Epoxy adhesives may be removed with a commercial paint stripping solution. 136 Most commonly used parts appear in BOLD. Wiring Accessories Bulk Package Part Numbers Bulk Package Part Numbers The following is an alpha-numeric cross reference of Standard Package Wiring Accessories parts with the corresponding Bulk Package part numbers. Standard Part No. Bulk Part No. Standard Part No. A Bulk Part No. Standard Part No. C Bulk Part No. E ABMM-A-C ABMM-A-D CBLS18-C CBLS18-M EMA-X STD. ONLY ABMM-AT-C ABMM-AT-C0 ABMS-A-C ABMM-AT-D ABMM-AT-D0 ABMS-A-D CBLS25-C CBLS37-C CBLS50-C CBLS25-M CBLS37-M CBLS50-M EMS-A-C EMS-A-C0 EMSK3-1-3-0 EMS-A-D EMS-A-D0 EMSK3-1-3-X ABM1M-A-C ABM1M-AT-C ABM1M-A-M ABM1M-AT-M CBLS62-C CBLS75-C CBLS62-M CBLS75-M EMSK3-1-X0 EMSK12-4-12-X0 EMSK3-1-C0 EMSK12-4-12-C0 ABM100-A-C ABM100-AT-C ABM100-AT-C0 ABM100-A-D ABM100-AT-D ABM100-AT-D0 CBP12-C CBP25-C CBP31-C CBP12-M CBP25-M CBP31-M ABM100-S6-C ABM100-S6-C69 ABM112-A-C ABM100-S6-D ABM100-S6-D69 ABM112-A-D CBP37-C CBP50-C CBP62-C CBP37-M CBP50-M CBP62-M ABM112-AT-C ABM112-AT-C0 ABM112-S6-C ABM112-S6-C69 ABM2S-A-C ABM2S-AT-C ABM2S-AT-C0 ABM3H-A-L ABM3H-AT-L ABM4H-A-L ABM4H-AT-L ACC19-A-C ACC19-A-C20 ACC19-AT-C ACC19-AT-C0 ACC38-A-C ACC38-A-C20 ACC38-AT-C ACC38-AT-C0 ACC62-A-C ACC62-A-C0 ACC62-A-C20 ACC62-AT-C0 AM2-C ARC.68-A-Q ARC.68-A-Q14 ARC.68-S6-Q ARC.68-S6-Q14 ABM112-AT-D ABM112-AT-D0 ABM112-S6-D ABM112-S6-D69 ABM2S-A-D ABM2S-AT-D ABM2S-AT-D0 ABM3H-A-T ABM3H-AT-T ABM4H-A-T ABM4H-AT-T ACC19-A-M ACC19-A-M20 ACC19-AT-M ACC19-AT-M0 ACC38-A-M ACC38-A-M20 ACC38-AT-M ACC38-AT-M0 ACC62-A-M ACC62-A-M0 ACC62-A-D20 ACC62-AT-M0 AM2-M ARC.68-A-C ARC.68-A-C14 ARC.68-S6-C ARC.68-S6-C14 CBP75-C CBP87-C CBP100-C CCS12-S8-C CCS12-S8-C0 CCS19-S8-C CCS19-S8-C0 CCS25-S8-C CCS25-S8-C0 CCS25-S10-C CCS25-S10-C0 CCS31-S8-C CCS31-S8-C0 CCS38-S8-C CCS38-S8-C0 CCS44-S8-C CCS44-S8-C0 CCS50-S8-C CCS50-S8-C0 CCH12-S10-C CCH12-S10-C0 CCH19-S10-C CCH19-S10-C0 CCH25-S10-C CCH25-S10-C0 CCH31-S10-C CCH31-S10-C0 CCH38-S10-C CBP75-M CBP87-M CBP100-M CCS12-S8-M CCS12-S8-M0 CCS19-S8-M CCS19-S8-M0 CCS25-S8-M CCS25-S8-M0 CCS25-S10-M CCS25-S10-M0 CCS31-S8-M CCS31-S8-M0 CCS38-S8-M CCS38-S8-M0 CCS44-S8-M CCS44-S8-M0 CCS50-S8-M CCS50-S8-M0 CCH12-S10-M CCH12-S10-M0 CCH19-S10-M CCH19-S10-M0 CCH25-S10-M CCH25-S10-M0 CCH31-S10-M CCH31-S10-M0 CCH38-S10-M ASMS-A-X ASMS-A-X0 ASMS-A-T ASMS-A-T0 CCH38-S10-C0 CCH44-S10-C CCH38-S10-M0 CCH44-S10-M BCS-L100 BCS-C115 BCS-D100 BCS-D115 BEC38-A-L BEC38-A-L20 BEC38-A-T BEC38-A-T20 CCH44-S10-C0 CCH50-S10-C CCH50-S10-C0 CCH56-S10-C CCH44-S10-M0 CCH50-S10-M CCH50-S10-M0 CCH56-S10-M BEC38-A-L0 BEC62-A-L BEC62-A-L20 BEC62-A-L0 BEC38-A-T0 BEC62-A-T BEC62-A-T20 BEC62-A-T0 CCH56-S10-C0 CCH62-S10-C CCH56-S10-M0 CCH62-S10-M BEC75-A-L BEC75-A-L20 BEC75-A-L0 BEC75-A-T BEC75-A-T20 BEC75-A-T0 CCH62-S10-C0 CCH69-S10-C CCH69-S10-C0 CCH75-S10-C CCH62-S10-M0 CCH69-S10-D CCH69-S10-D0 CCH75-S10-M CCH75-S10-C0 CCH81-S10-C CCH75-S10-M0 CCH81-S10-M BECP38H25-L BECP38H25-L20 BECP75H25-L BECP38H25-T BECP38H25-T20 BECP75H25-T CCH81-S10-C0 CCH87-S10-C CCH87-S10-C0 CCH81-S10-M0 CCH87-S10-M CCH87-S10-M0 BECP75H25-L20 BECP75H25-T20 CCH100-S10-C CCH100-S10-C0 CCH100-S10-M CCH100-S10-M0 B F FCBI1-S10-C20 FCBI2-S10-C20 FCBI3-S10-C20 FCBI1-S10-M20 FCBI2-S10-M20 FCBI3-S10-M20 FCC5-A-C8 FCC-A-C8 FCC5-A-D8 FCC-A-D8 FCH2-A-C14 FCM1-A-C14 FCM1-S6-C14 FCM2-A-C14 FCM2-S6-C14 FCM1.2-A-C14 FCM1.2-S6-C14 FCM3.25-A-L14 FCM3.25-S6-L14 FCPI1-C20 FCPI2-C20 FCPI3-C20 FCH2-A-T14 FCM1-A-T14 FCM1-S6-T14 FCM2-A-T14 FCM2-S6-T14 FCM1.2-A-T14 FCM1.2-S6-T14 FCM3.25-A-T14 FCM3.25-S6-T14 FCPI1-M20 FCPI2-M20 FCPI3-M20 H HCME06A12-C130 HCMP06B12-C20 HCMP06C12-C20 HWS2819-C HCME06A12-M130 HCMP06B12-M20 HCMP06C12-M20 HWS2819-M K KIMS-H366-C2 KIMS-H430-C6 KIMS-H500-C4 KIMS-H366-M2 KIMS-H430-M6 KIMS-H500-M4 L LPFCM14-A-C14 LPFCM22-A-C14 LPFCM34-A-C14 LPMM-S2-C LPMM-S5-C LPMS-S8-C LPFCM14-A-D14 LPFCM22-A-D14 LPFCM34-A-D14 LPMM-S2-M LPMM-S5-M LPMS-S8-M LWC19-A-C LWC19-A-C14 LWC19-A-M LWC19-A-M14 LWC19-H25-C LWC19-H25-C14 LWC25-A-C LWC25-A-C14 LWC19-H25-M LWC19-H25-M14 LWC25-A-D LWC25-A-D14 LWC25-H25-C LWC25-H25-C14 LWC25-H25-D LWC25-H25-D14 LWC38-A-C LWC38-A-C14 LWC38-H25-C LWC38-H25-C14 LWC38-A-D LWC38-A-D14 LWC38-H25-D LWC38-H25-D14 LWC50-A-L LWC50-A-L14 LWC50-A-T LWC50-A-T14 LWC50-H25-L LWC50-H25-L14 LWC75-A-L LWC50-H25-T LWC50-H25-T14 LWC75-A-C LWC75-A-L14 LWC75-A-C14 Most commonly used parts appear in BOLD. 137 Wiring Accessories Bulk Package Part Numbers Bulk Package Part Numbers (continued) The following is an alpha-numeric cross reference of Standard Package Wiring Accessories parts with the corresponding Bulk Package part numbers. Standard Part No. LWC75-H25-L LWC75-H25-L14 LWC100-A-L LWC100-A-L14 LWC100-H25-L Bulk Part No. LWC75-H25-C LWC75-H25-C14 LWC100-A-C LWC100-A-C14 LWC100-H25-C LWC100-H25-L14 LWC100-H25-C14 Standard Part No. Bulk Part No. TA1S8-C TA1S10-C TA2-C THASS8-C TA1S8-M TA1S10-M TA2-M THASS8-M Standard Part No. TM2S8-C TM2S8-C100 TM3A-C TM3R6-C TM3S10-C THASS-M30 THASS10-M THASS10F-M30 THASS25-M TM3S25-C TM3S8-C TM3S8-C100 TP2-C TM3S25-M TM3S8-M TM3S8-M100 TP2-M TP4H-D TWR-M T Bulk Part No. TM2S8-M TM2S8-M100 TM3A-M TM3R6-M TM3S10-M MBMS-S10-C MMS8 MBMS-S10-M STD. ONLY THASS8-C30 THASS10-C THASS10F-C30 THASS25-C MP150-C THRU MP350-C MP150-C0 MP150-M THRU MP350-M MP150-M0 THASS25-C30 THASS8F-C THASS8F-C30 THASS10F-C THASS25-M30 THASS8F-M THASS8F-M30 THASS10F-M TP4H-C TWR-C VCC25-A-C VCC25-A-M THRU MP350-C0 BULK ONLY THRU MP350-M0 MP150R THRU THASS10F-C30 THASS25F-C THASS25F-C30 THAUF4-X THASS10F-M30 THASS25F-M THASS25F-M30 THAUF4-C VCC50-A-C VCS-25-L VCS-25-L100 VWS106-C VCC50-A-T VCS-25-D VCS-25-D100 VWS106-M MPMS19-C0 MP250R MPMS19-M0 THM1SC-C THM1SC-C30 THM1SC-M THM1SC-M30 VWS106-C20 VWS4218-C VWS106-M20 VWS4218-M MPMH38-L0 MPMS25-C0 MPMH38-D0 MPMS25-M0 THMSC35-C30 THMSC35-C639 THMSC35-M30 THMSC35-M639 VWS4238-C VWS4274-C VWS4238-M VWS4274-M MPMWH32-D0 THMSC35-C630 THMSC35F-C630 THMSC35-M630 THMSC35F-M630 VWS42105-C VWSDC-C VWS42105-M VWSDC-D PBMS-H25-C PBMS-H25-C14 PC038-H25D-C0 PBMS-H25-M PBMS-H25-M14 PC038-H25D-D0 THMSC35F-C39 THMSC35F-C639 THMSC60-C30 THMSC35-M39 THMSC35-M639 THMSC60-M30 WS75-25-C WS75-50-C WS75-25-M WS75-50-M PC050-H25D-C0 PC062-H25D-C0 PC050-H25D-D0 PC062-H25D-D0 THMSC60-C39. THMSC60F-C30 THMSC60-M39 THMSC60F-M30 WS75-75-C WS75-75-M PC075-H25D-C0 PC087-H25D-C0 PC075-H25D-D0 PC087-H25D-D0 THMSC60F-C39 THMSC85-C30 THMSC60F-M39 THMSC85-M30 PC100-H25D-C0 PC112-H25D-C0 PC100-H25D-T0 PC112-H25D-T0 THMSC85-C39 THMSP25-C THMSC85-M39 THMSP25-M PC125-H25D-C0 PLA2S-A-Q PC125-H25D-T0 PLA2S-A-C PMCC38H25-C PM2H25-C PP1S-S10-X PMCC38H25-M PM2H25-M PP1S-S10-C THMSP25-C30 THMSP25F-C30 TMEH-S8-Q0 THMSP25-M30 THMSP25F-M30 TMEH-S8-C0 TMEH-S10-Q0 TMEH-S25-Q0 TMEH-S10-C0 TMEH-S25-C0 PP2S-S10-X PP2S-S12-X PRA2S-A-Q PWMS-H25-C PP2S-S10-C PP2S-S12-C PRA2S-A-C PWMS-H25-M TMSH50-C300 TMSTHS10-C0 TMSTHS13-C0 TMSTHS16-C0 TMSH50-T300 TMSTHS10-D0 TMSTHS13-D0 TMSTHS16-D0 TMSTHS19-C0 TMSTLHS5-C0 TMSTLHS6-C0 TMSTHS16-D0 TMSTLHS5-M0 TMSTLHS6-M0 TMSTLHS8-C0 TM1A-C TM1S4-C TM1S6-C TM2A-C TMSTLHS8-M0 TM1A-M TM1S4-M TM1S6-M TM2A-M TM2PWH25-C TM2R6-C TM2S6-C TM2PWH25-M TM2R6-M TM2S6-M M MPMWH32-L0 P R RAFCBI1-S6-C20 RAFCBI2-S6-C20 RAFCBI3-S6-C20 RAFCBI1-S6-M20 RAFCBI2-S6-M20 RAFCBI3-S6-M20 S SICH25-C SICH38-C SICH50-C SICH25-M SICH38-M SICH50-M SICH75-C SMS-A-C SICH75-M SMS-A-D 138 Most commonly used parts appear in BOLD. V W Abrasion Protection Products Heat Shrink PVC Non-Shrink Tubing Spiral Wrap Grommet Edging Corrugated Loom Tubing Braided Sleeving Split Harness Wrap Abrasion Protection for Wire, Cable, Hydraulic and Pneumatic Tubing Most commonly used parts appear in BOLD. 139 PANDUIT (R) Heat Shrink Tubing -- Heat Shrink Tubing Quick Selection Guide Quick reference for PANDUIT (R) Heat Shrinking for specific location applications X U.L. Listed UL Recognized CSA Certified VW-1 Rated X X Very Flexible X X X X Flexible Semi-Rigid Thin Wall CHARACTERISTICS TT A TT ST H S H VA TT S H P TT S H K TT TN T V TT ST H S H ST H S H ST H H ST TR A X X X X X X X X X X X X X X X X X X X X X Flame Retardant Adhesive Lined (Dual Wall) X X X X X Meets Military Specification X X X X X X X X X X X X X X Thick Wall Cross-Linked Material Colors Available High Shrink Ratio X** X X X X X X X X X X X X X X X* X X X 2.5:1 X X 3:1 X X 3:1 X X X X X X X X X X X X X X X Below Ground Application High Temp Applications(>250F) Highly Chemical Resistant Low Coefficient of Friction Custom Cut Lengths Standard 6" pieces Standard 4' lengths Small 25' Reels *Black/Red **Except red Except clear Except sizes over 1" Large Reels IP Rating Found on Page. . . X X X X X X X X X 62 X X 62 X X 62 62 148 150 141- 145144 146 X X X -- X X 62 66 66 66 68 149 147 151 153 152 154 See page 160 for IP Technical information. Thin Wall Heat Shrink Part Number System HSTT Type HSTT = Thin Wall HSTTV = Thin Wall VW-1 HSTTN = Thin Wall Neoprene HSTTK = Thin Wall KYNAR HSTTT = Thin Wall TFE TEFLON HSTTP = Thin Wall PVC HSTTVA = Flexible Adhesive Lined HSTTRA = Semi-Rigid Adhesive Lined HSTTA = Thin Wall Adhesive Lined 140 Most commonly used parts appear in BOLD. 12 - Expanded Diameter 05 = 3/64" (1.2mm) 06 = 1/16" (1.6mm) 09 = 3/32" (2.4mm) 12 = 1/8" (3.2mm) 19 = 3/16" (4.8mm) 25 = 1/4" (6.4mm) 38 = 3/8" (9.5mm) 50 = 1/2" (12.7mm) 75 = 3/4" (19.0mm) 100 = 1" (25.4mm) 150 = 1-1/2" (38.1mm) 200 = 2" (50.5mm) 300 = 3" (76.2mm) 400 = 4" (101.6mm) 48 - Q Tube Length 48" = (1.2m) NONE = Reel 10 Color NONE = Black C = Clear CQ = 125 Pcs. 2 = 2 Pcs. 2 = Red T = 200 Pcs. 5 = 5 Pcs. 4 = Yellow Q = 25 Pcs. TL = 250 Pcs. LQ = 75 Pcs. Y= 6" Pcs. 5 = Green 6 = Blue 10 = White 45 = Yellow/ Green Reels (If No Tube Length Specified) Q = 25' (7.6m) L = 50' (15.2m) C = 100' (30.5m) T = 200' (61.0m) D = 500' (152.4m) M = 1000' (304.8m) Package Quantity (If Tube Length Specified) For standard packages containing 6" lengths, refer to individual pages for complete part number offering. Note: The above information is to be used as a guide. For specific part number offerings review individual pages for verification. KYNAR is a registered trademark of Atofiina Chemicals, Inc. TEFLON is a registered trademark of E.I. DuPont de Nemours Co. Flexible Polyolefin DRY-SHRINK TM Heat Shrink Tubing HSTT Heat Shrink in 4' (1.2m) Pieces and Reels * General purpose heat shrink tubing for dry locations * Applications include insulating, protecting, harnessing and identifying wires (Except Clear) (Except Clear) Type Materials HSTT Polyolefin Cross-Linked 600V -67F to 275F (-55C to 135C) AMS-DTL-23053/5 Class 1 or Class 2 (Except Clear) Flexible Shrink Ratio: 2:1 Flame Retardant (Except Clear) Variety of Colors Maximum UL temperature range is 125C HSTT in Bulk Packages -- Large Reels and 4' (1.2m) Pcs. (3/64" to 3/16" Expanded I.D.) Part Number (Black) HSTT05-48-Q HSTT05-48-TL HSTT05-C HSTT05-M HSTT06-48-Q HSTT06-48-TL HSTT06-C HSTT06-M HSTT09-48-Q HSTT09-48-TL HSTT09-C HSTT09-M HSTT12-48-Q HSTT12-48-TL HSTT12-C HSTT12-M HSTT19-48-Q HSTT19-48-TL HSTT19-C HSTT19-M Nominal Diameter in. 3/64 Minimum Expanded I.D. in. (mm) .046 (1.2) Maximum Recovered I.D. in. (mm) .023 (0.6) Nominal Recovered Wall Thickness in. (mm) .016 (0.4) 1/16 .063 (1.6) .031 (0.8) .017 (0.4) 3/32 .093 (2.4) .046 (1.2) .020 (0.5) 1/8 .125 (3.2) .062 (1.6) .020 (0.5) 3/16 .187 (4.8) .093 (2.4) .020 (0.5) Length Feet (m) 4 (1.2) 4 (1.2) 100 (30.5) 1000 (304.8) 4 (1.2) 4 (1.2) 100 (30.5) 1000 (304.8) 4 (1.2) 4 (1.2) 100 (30.5) 1000 (304.8) 4 (1.2) 4 (1.2) 100 (30.5) 1000 (304.8) 4 (1.2) 4 (1.2) 100 (30.5) 1000 (304.8) Bulk Pkg. Qty.* Bulk Ctn. Qty. 25 Pcs. 250 Pcs. 1 Reel 1 Reel 25 Pcs. 250 Pcs. 1 Reel 1 Reel 25 Pcs. 250 Pcs. 1 Reel 1 Reel 25 Pcs. 250 Pcs. 1 Reel 1 Reel 25 Pcs. 250 Pcs. 1 Reel 1 Reel -- -- 10 Reels 2 Reels -- -- 10 Reels 2 Reels -- -- 10 Reels 2 Reels -- -- 10 Reels 2 Reels -- -- 10 Reels 2 Reels *Order in multiples of bulk pkg. qty. Most commonly used parts appear in BOLD. See page 160 for IP Technical Information. For additional color information, contact PANDUIT (R) Technical Assistance 866-405-6657. Shrink ratios are approximations; please refer to above ordering information for the exact min. Expanded and max. recovered I.D.'s. 141 Flexible Polyolefin DRY-SHRINK TM Heat Shrink Tubing HSTT in Bulk Packages (cont.) -- Large Reels and 4'(1.2m) Pcs. (1/4" to 3/4" Expanded I.D.) Part Number (Black) HSTT25-48-Q HSTT25-48-TL HSTT25-C HSTT25-D HSTT38-48-Q HSTT38-48-TL HSTT38-C HSTT38-T HSTT50-48-Q HSTT50-48-T HSTT50-C HSTT50-T HSTT75-48-5 HSTT75-48-CQ HSTT75-C HSTT75-T Nominal Diameter in. Minimum Expanded I.D. in. (mm) Maximum Recovered I.D. in. (mm) Nominal Recovered Wall Thickness in. (mm) 1/4 .250 (6.4) .125 (3.2) .025 (0.6) 3/8 .375 (9.5) .187 (4.8) .025 (0.6) 1/2 .500 (12.7) .250 (6.4) .025 (0.6) 3/4 .750 (19.0) .375 (9.5) .030 (0.8) (Except Clear) Length Feet (m) Bulk Pkg. Qty.* Bulk Ctn. Qty. 4 (1.2) 4 (1.2) 100 (30.5) 500 (152.4) 4 (1.2) 4 (1.2) 100 (30.5) 200 (61.0) 4 (1.2) 4 (1.2) 100 (30.5) 200 (61.0) 4 (1.2) 4 (1.2) 100 (30.5) 200 (61.0) 25 Pcs. 250 Pcs. 1 Reel 1 Reel 25 Pcs. 250 Pcs. 1 Reel 1 Reel 25 Pcs. 200 Pcs. 1 Reel 1 Reel 5 Pcs. 125 Pcs. 1 Reel 1 Reel -- -- 10 Reels 2 Reels -- -- 10 Reels 2 Reels -- -- 10 Reels 2 Reels -- -- 10 Reels 2 Reels (Except Clear) HSTT in Bulk Packages -- Large Reels and 4' (1.2m) Pcs. (1" to 4" Expanded I.D.) Part Number (Black) HSTT100-48-5 HSTT100-48-LQ HSTT100-C HSTT150-48-5 HSTT150-C HSTT200-48-5 HSTT200-L HSTT300-48-2 HSTT300-L HSTT400-48-2 HSTT400-L 142 Nominal Diameter in. Minimum Expanded I.D. in. (mm) Maximum Recovered I.D. in. (mm) Nominal Recovered Wall Thickness in. (mm) 1 1.00 (25.4) .500 (12.7) .035 (0.9) 1 1/2 1.50 (38.1) .750 (19.0) .040 (1.0) 2 2.00 (50.8) 1.00 (25.4) .045 (1.1) 3 3.00 (76.2) 1.50 (38.1) .050 (1.3) 4 4.00 (101.6) 2.00 (50.8) .055 (1.4) Most commonly used parts appear in BOLD. Length Feet (m) Bulk Pkg. Qty.* Bulk Ctn. Qty. 4 (1.2) 4 (1.2) 100 (30.5) 4 (1.2) 100 (30.5) 4 (1.2) 50 (15.2) 4 (1.2) 50 (15.2) 4 (1.2) 50 (15.2) 5 Pcs. 75 Pcs. 1 Reel 5 Pcs. 1 Reel 5 Pcs. 1 Reel 2 Pcs. 1 Reel 2 Pcs. 1 Reel -- -- 2 Reels -- 2 Reels -- 2 Reels -- -- -- -- *Order in multiples of bulk pkg. qty. For additional color information, contact PANDUIT (R) Technical Assistance 866-405-6657. Shrink ratios are approximations; please refer to above ordering information for the exact min. Expanded and max. Recovered I.D.'s. Flexible Polyolefin DRY-SHRINK TM Heat Shrink Tubing HSTT Heat Shrink on 25' (7.6m) Reels * General purpose heat shrink tubing for dry locations * Featuring unique self dispensing Q-Box 25' (7.5m) HSTT in Standard Packages Part Number (Black) Nominal Diameter in. Minimum Expanded I.D. in. (mm) HSTT05-Q HSTT06-Q HSTT09-Q HSTT12-Q HSTT19-Q HSTT25-Q HSTT38-Q HSTT50-Q HSTT75-Q 3/64 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 .046 (1.2) .063 (1.6) .093 (2.4) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .750 (19.0) Maximum Recovered I.D. in. (mm) Nominal Recovered Wall Thickness in. (mm) Length Feet (m) Std. Pkg. Qty.* Std. Ctn. Qty. 0.23 (0.6) .031 (0.8) .046 (1.2) .062 (1.6) .093 (2.4) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .016 (0.4) .017 (0.4) .020 (0.5) .020 (0.5) .020 (0.5) .025 (0.6) .025 (0.6) .025 (0.6) .030 (0.8) 25 (7.6) 25 (7.6) 25 (7.6) 25 (7.6) 25 (7.6) 25 (7.6) 25 (7.6) 25 (7.6) 25 (7.6) 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 10 Reels 10 Reels 10 Reels 10 Reels 10 Reels 10 Reels 10 Reels 10 Reels 10 Reels HSTT Heat Shrink Standard Packs of Heat Shrink -- 6" (152.4mm) Pieces Small package holds unused tube and fits easily in a tool box * General purpose heat shrink tubing for dry locations * Applications include insulating, protecting, harnessing and identifying wires HSTT in Standard Packages Part Number (Black) Nominal Diameter in. Minimum Expanded I.D. in. (mm) HSTT06-Y HSTT09-Y HSTT12-Y HSTT19-Y HSTT25-Y HSTT38-Y HSTT50-Y HSTT75-Y HSTT100-Y 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 1 .063 (1.6) .093 (2.4) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .750 (19.0) 1.00 (25.4) Maximum Recovered I.D. in. (mm) Nominal Recovered Wall Thickness in. (mm) Length in. (mm) Std. Pkg. Qty.* Std. Ctn. Qty. .031 (0.8) .046 (1.2) .062 (1.6) .093 (2.4) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .017 (0.4) .020 (0.5) .020 (0.5) .020 (0.5) .025 (0.6) .025 (0.6) .025 (0.6) .030 (0.8) .035 (0.9) 6 (152.4) 6 (152.4) 6 (152.4) 6 (152.4) 6 (152.4) 6 (152.4) 6 (152.4) 6 (152.4) 6 (152.4) 26 pcs. 24 pcs. 20 pcs. 18 pcs. 14 pcs. 12 pcs. 10 pcs. 8 pcs. 6 pcs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. *Order in multiples of std. pkg. qty. For additional color information, contact PANDUIT (R) Technical Assistance 866-405-6657. Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.'s. Most commonly used parts appear in BOLD. 143 Flexible Polyolefin DRY-SHRINK TM Heat Shrink Tubing Standard Packs of Heat Shrink -- 6" (152.4mm) Pieces Small package holds unused tube and fits easily in a tool box * Assorted colors and diameters available HSTT -- Combination: Black and Colors -- Single Diameter Part Number HSTT06-YK1 HSTT09-YK1 HSTT12-YK1 HSTT19-YK1 HSTT25-YK1 HSTT38-YK1 HSTT50-YK1 HSTT75-YK1 HSTT100-YK1 Nominal Diameter in. 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 1 Minimum Expanded I.D. in. (mm) .063 (1.6) .093 (2.4) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .750 (19.0) 1.00 (25.4) Maximum Recovered I.D. in. (mm) .031 (0.8) .046 (1.2) .062 (1.6) .093 (2.4) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) Black No. Pcs. 8 6 2 6 2 6 4 2 1 Each Color No. Pcs. 3 3 3 2 2 1 1 1 1 Std. Pkg. Qty.* 26 pcs. 24 pcs. 20 pcs. 18 pcs. 14 pcs. 12 pcs. 10 pcs. 8 pcs. 7 pcs. Std. Ctn. Qty. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. NOTE: Colors include clear, red, yellow, green, blue and white. For additional color information, contact PANDUIT (R) Technical Assistance 866-405-6657. HSTT -- Black Only -- Multiple Diameters Part Number HSTT-YK1 HSTT-YK2 Black Number Std. Std. Nominal of Pieces by Pkg. Ctn. Diameter Diameter Qty.* Qty. Various; (2) pcs. each 14 pcs. 10 Pkgs. Smaller 1/8", 1/16", 3/16", Range 3/32", 1/4", 1/2", 3/8" Various; (2) pcs. each 8 pcs. 10 Pkgs. Larger 3/8", 1/2", Range 3/4", 1" HSTT -- Yellow/Green Stripe -- Multiple Diameters Part Number HSTT-YK1-45 HSTT-YK2-45 144 Nominal Diameter Various; Smaller Range Various; Larger Range Number of Pieces by Diameter (2) pcs. each 1/8", 3/16", 1/4", 3/8" (2) pcs. each 3/8", 1/2", 3/4" Most commonly used parts appear in BOLD. Std. Std. Pkg. Ctn. Qty.* Qty. 8 pcs. 10 Pkgs. 6 pcs. 10 Pkgs. *Order in multiples of std. pkg. qty. Flexible Polyolefin VW-1 DRY-SHRINK TM Heat Shrink Tubing HSTTV Heat Shrink in Small Reels and 4' (1.2m) Pieces * * * * For dry locations Highly flame retardant Meets UL VW-1 rating Fast Shrink Time Type Materials HSTTV Polyolefin Cross-Linked 600V -67F to 257F (-55C to 125C ) AMS-DTL-23053/5 Class 3 Flexible Shrink Ratio: 2:1 Highly Flame Retardant VW-1 VW-1 OFT Maximum UL temperature range is 125 C. HSTTV in Bulk Packages -- Small Reels & 4' (1.2m) Pcs. Part Number (Black) HSTTV05-48-Q HSTTV05-48-TL HSTTV05-C HSTTV06-48-Q HSTTV06-48-TL HSTTV06-C HSTTV09-48-Q HSTTV09-48-TL HSTTV09-C HSTTV12-48-Q HSTTV12-48-TL HSTTV12-C HSTTV19-48-Q HSTTV19-48-TL HSTTV19-C HSTTV25-48-Q HSTTV25-48-TL HSTTV25-C HSTTV38-48-Q HSTTV38-48-TL HSTTV38-C HSTTV50-48-Q HSTTV50-48-T HSTTV50-C HSTTV75-48-5 HSTTV75-48-CQ HSTTV75-C HSTTV100-48-5 HSTTV100-48-LQ HSTTV100-C HSTTV150-48-5 HSTTV150-C Nominal Diameter in. Maximum Minimum Recovered Expanded I.D. I.D. in. (mm) in. (mm) Nominal Recovered Wall Thickness in. (mm) 3/64 .046 (1.2) .023 (0.6) .016 (0.4) 1/16 .063 (1.6) .031 (0.8) .017 (0.4) 3/32 .093 (2.4) .046 (1.2) 1/8 .125 (3.2) .062 (1.6) 3/16 .187 (4.8) .093 (2.4) 1/4 .250 (6.4) .125 (3.2) .025 (0.6) 3/8 .375 (9.5) .187 (4.8) .025 (0.6) 1/2 .500 (12.7) .250 (6.4) .025 (0.6) 3/4 .750 (19.0) .375 (9.5) .030 (0.8) 1 1.00 (25.4) .500 (12.7) .035 (0.9) 1 1/2 1.50 (38.1) .750 (19.0) .040 (1.0) .020 (0.5) *Order in multiples of bulk pkg. qty. For additional color information, contact PANDUIT (R) Technical Assistance 866-405-6657. Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.'s. Length Feet (m) 4 (1.2) 4 (1.2) 100 (30.5) 4 (1.2) 4 (1.2) 100 (30.5) 4 (1.2) 4 (1.2) 100 (30.5) 4 (1.2) 4 (1.2) 100 (30.5) 4 (1.2) 4 (1.2) 100 (30.5) 4 (1.2) 4 (1.2) 100 (30.5) 4 (1.2) 4 (1.2) 100 (30.5) 4 (1.2) 4 (1.2) 100 (30.5) 4 (1.2) 4 (1.2) 100 (30.5) 4 (1.2) 4 (1.2) 100 (30.5) 4 (1.2) 100 (30.5) Bulk Pkg. Qty.* 25 Pcs. 250 Pcs. 1 Reel 25 Pcs. 250 Pcs. 1 Reel 25 Pcs. 250 Pcs. 1 Reel 25 Pcs. 250 Pcs. 1 Reel 25 Pcs. 250 Pcs. 1 Reel 25 Pcs. 250 Pcs. 1 Reel 25 Pcs. 250 Pcs. 1 Reel 25 Pcs. 200 Pcs. 1 Reel 5 Pcs. 125 Pcs. 1 Reel 5 Pcs. 75 Pcs. 1 Reel 5 Pcs. 1 Reel Bulk Ctn. Qty. -- -- 10 Reels -- -- 10 Reels -- -- 10 Reels -- -- 10 Reels -- -- 10 Reels -- -- 10 Reels -- -- 10 Reels -- -- 10 Reels -- -- 10 Reels -- -- 2 Reels -- 2 Reels Most commonly used parts appear in BOLD. 145 Flexible Polyolefin VW-1 DRY-SHRINK TM Heat Shrink Tubing HSTTV Heat Shrink in 1000' (304.8m), 500' (152.4m) and 200' (61.0m) Reels HSTTV in Bulk Packages -- Large Reels Nominal Diameter in. Length Feet (m) Part Number Black Red Yellow 3/64 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 1000 (304.8) 1000 (304.8) 1000 (304.8) 1000 (304.8) 1000 (304.8) 500 (152.4) 200 (61.0) 200 (61.0) 200 (61.0) HSTTV05-M HSTTV06-M HSTTV09-M HSTTV12-M HSTTV19-M HSTTV25-D HSTTV38-T HSTTV50-T HSTTV75-T HSTTV05-M2 HSTTV06-M2 HSTTV09-M2 HSTTV12-M2 HSTTV19-M2 HSTTV25-D2 HSTTV38-T2 HSTTV50-T2 HSTTV75-T2 HSTTV05-M4 HSTTV06-M4 HSTTV09-M4 HSTTV12-M4 HSTTV19-M4 HSTTV25-D4 HSTTV38-T4 HSTTV50-T4 HSTTV75-T4 Blue Bulk Pkg. Qty.* Bulk Ctn. Qty. HSTTV05-M6 HSTTV06-M6 HSTTV09-M6 HSTTV12-M6 HSTTV19-M6 HSTTV25-D6 HSTTV38-T6 HSTTV50-T6 HSTTV75-T6 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels * Order in multiples of bulk pkg. qty. HSTTV Heat Shrink in 25' (7.5m) Reels HSTTV in Standard Packages of 25' (7.5m) Reels -- Black Only Part Number HSTTV05-Q HSTTV06-Q HSTTV09-Q HSTTV12-Q HSTTV19-Q HSTTV25-Q HSTTV38-Q HSTTV50-Q HSTTV75-Q HSTTV100-Q Nominal Nominal Minimum Maximum Recovered Wall Diameter Expanded I.D. Recovered I.D. Thickness in. in. (mm) in. (mm) in. (mm) 3/64 .046 (1.2) .023 (0.6) .020 (0.5) 1/16 .063 (1.6) .031 (0.8) .020 (0.5) 3/32 .093 (2.4) .046 (1.2) .020 (0.5) 1/8 .125 (3.2) .062 (1.6) .020 (0.5) 3/16 .187 (4.8) .093 (2.4) .020 (0.5) 1/4 .250 (6.4) .125 (3.2) .025 (0.6) 3/8 .375 (9.5) .187 (4.8) .025 (0.6) 1/2 .500 (12.7) .250 (6.4) .025 (0.6) 3/4 .750 (19.0) .375 (9.5) .030 (0.8) 1 1.00 (25.4) .500 (12.7) .035 (0.9) Length Feet (m) 25 (7.5) 25 (7.5) 25 (7.5) 25 (7.5) 25 (7.5) 25 (7.5) 25 (7.5) 25 (7.5) 25 (7.5) 25 (7.5) * Order in multiples of std. pkg. qty. Standard Packs of Heat Shrink -- 6" (152.4mm) Pieces HSTTV -- Single Diameter -- Black Only Part Number HSTTV05-Y HSTTV06-Y HSTTV09-Y HSTTV12-Y HSTTV19-Y HSTTV25-Y HSTTV38-Y HSTTV50-Y HSTTV75-Y HSTTV100-Y Nominal Diameter in. 3/64 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 1 Minimum Expanded I.D. in. (mm) .046 (1.2) .063 (1.6) .093 (2.4) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .750 (19.0) 1.00 (25.4) * Order in multiples of std. pkg. qty. 146 Most commonly used parts appear in BOLD. Maximum Recovered I.D. in. (mm) .023 (0.6) .031 (0.8) .046 (1.2) .062 (1.6) .093 (2.4) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) Std. Pkg. Qty.* 26 pcs. 26 pcs. 24 pcs. 20 pcs. 18 pcs. 14 pcs. 12 pcs. 10 pcs. 8 pcs. 6 pcs. Std. Ctn. Qty. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. Std. Pkg. Qty.* 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel Std. Ctn. Qty. 10 Reels 10 Reels 10 Reels 10 Reels 10 Reels 10 Reels 10 Reels 10 Reels 10 Reels 2 Reels PVC DRY-SHRINK TM Heat Shrink Tubing HSTTP Heat Shrink * * * * * For dry locations Flexible, highly flame retardant tubing Good resistance to most fuels and oils Good cut through and solder resistance Material is UV Resistant Type Materials Polyvinyl Chloride Cross-Linked HSTTP 600V -4F to 221F (-20C to 105C) Flexible Shrink Ratio: 2:1 Highly Flame Retardant VW-1 HSTTP in Standard Packages -- Reels -- Black Only Part Number HSTTP05-Q HSTTP05-C HSTTP05-M HSTTP06-Q HSTTP06-C HSTTP06-M HSTTP09-Q HSTTP09-C HSTTP09-M HSTTP12-Q HSTTP12-C HSTTP12-M HSTTP19-Q HSTTP19-C HSTTP19-M HSTTP25-Q HSTTP25-C HSTTP25-D HSTTP38-Q HSTTP38-C HSTTP38-T HSTTP50-Q HSTTP50-C HSTTP75-Q HSTTP75-C HSTTP100-Q HSTTP100-C HSTTP150-Q HSTTP150-C HSTTP200-Q Nominal Minimum Maximum Diameter Expanded I.D. Recovered I.D. in. in. (mm) in. (mm) Nominal Recovered Wall Thickness in. (mm) 3/64 .046 (1.2) .023 (0.6) .020 (0.5) 1/16 .063 (1.6) .031 (0.8) .020 (0.5) 3/32 .093 (2.4) .046 (1.2) .025 (0.6) 1/8 .125 (3.2) .062 (1.6) .025 (0.6) 3/16 .187 (4.8) .093 (2.4) .025 (0.6) 1/4 .250 (6.4) .125 (3.2) .025 (0.6) 3/8 .375 (9.5) .187 (4.8) .030 (0.8) 1/2 .500 (12.7) .250 (6.4) .030 (0.8) 3/4 .750 (19.0) .375 (9.5) .035 (0.9) 1 1.00 (25.4) .500 (12.7) .040 (1.0) 1 1/2 1.50 (38.1) .750 (19.0) .045 (1.1) 2 2.00 (50.8) 1.00 (25.4) .050 (1.3) *Order in multiples of std. pkg. qty. Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.'s. Length Feet (m) Std. Pkg. Qty.* Std. Ctn. Qty. 25 (7.5) 100 (30.5) 1000 (304.8) 25 (7.5) 100 (30.5) 1000 (304.8) 25 (7.5) 100 (30.5) 1000 (304.8) 25 (7.5) 100 (30.5) 1000 (304.8) 25 (7.5) 100 (30.5) 1000 (304.8) 25 (7.5) 100 (30.5) 500 (152.4) 25 (7.5) 100 (30.5) 200 (61.0) 25 (7.5) 100 (30.5) 25 (7.5) 100 (30.5)) 25 (7.5) 100 (30.5) 25 (7.5) 100 (30.5) 25 (7.5) 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 10 Reels 2 Reels 2 Reels 10 Reels 2 Reels 2 Reels 10 Reels 2 Reels 2 Reels 10 Reels 2 Reels 2 Reels 10 Reels 2 Reels 2 Reels 10 Reels 2 Reels 2 Reels 10 Reels 2 Reels 2 Reels 10 Reels 2 Reels 10 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels Most commonly used parts appear in BOLD. 147 Neoprene DRY-SHRINK TM Heat Shrink Tubing HSTTN Heat Shrink * For dry locations * Highly flexible tubing * Offers excellent chemical resistance, especially to fuels and oils * Highly flame retardant Type Materials Elastomer Neoprene Cross-Linked HSTTN 600V -94F to 250F (-70C to 121C) AMS-DTL-23053/1 Class 2 Highly Flexible Shrink Ratio: 2:1 Highly Flame Retardant HSTTN in Standard Packages -- 25' (7.5m) and 100' (30.5m) Reels -- Black Only Part Number Nominal Diameter in. Minimum Expanded I.D. in. (mm) Maximum Recovered I.D. in. (mm) Nominal Recovered Wall Thickness in. (mm) HSTTN25-C HSTTN38-C HSTTN50-C HSTTN63-C HSTTN75-C HSTTN88-C HSTTN100-C HSTTN125-C HSTTN150-C HSTTN175-C HSTTN200-Q HSTTN300-Q 1/4 3/8 1/2 5/8 3/4 7/8 1 1 1/4 1 1/2 1 3/4 2 3 .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.0) .875 (22.2) 1.00 (25.4) 1.25 (31.8) 1.50 (38.1) 1.75 (44.5) 2.00 (50.8) 3.00 (76.2) .143 (3.6) .211 (5.4) .286 (7.3) .357 (9.1) .428 (10.9) .500 (12.7) .570 (14.5) .714 (18.1) .857 (21.8) 1.00 (25.4) 1.140 (29.0) 1.710 (43.4) .035 (0.9) .040 (1.0) .048 (1.2) .052 (1.3) .057 (1.5) .065 (1.7) .070 (1.8) .087 (2.2) .095 (2.4) .107 (2.7) .110 (2.8) .125 (3.8) 148 Most commonly used parts appear in BOLD. Length Feet (m) Std. Pkg. Qty.* Std. Ctn. Qty. 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 25 (7.5) 25 (7.5) 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 1 Reel 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels *Order in multiples of std. pkg. qty. Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.'s. TFE TEFLON DRY-SHRINK TM Heat Shrink Tubing HSTTT (TFE) Heat Shrink Type Materials HSTTT * For dry locations * Semi-rigid, highly heat resistant * Offers the widest temperature range of any plastic material * Color is milky clear Polytetrafluoroethylene 600V -88F to 482F (-67C to 250C) AMS-DTL-23053/ 12, Class 3 Semi-Rigid Shrink Ratio: 2:1 Non-Flammable NOTE: Special instructions on page 158. 2:1 Shrink Ratio (Class 3) -- HSTTT in Standard Packages -- 4' (1.2m) Pcs. Part Number Nominal Diameter Minimum Expanded I.D. in. (mm) Maximum Recovered I.D. in. (mm) Nominal Recovered Wall Thickness in. (mm) Length Feet (m) Std. Pkg. Qty.* HSTTT03-48-Q HSTTT04-48-Q HSTTT046-48-Q HSTTT05-48-Q HSTTT055-48-Q HSTTT06-48-Q HSTTT08-48-Q HSTTT09-48-Q HSTTT12-48-Q HSTTT15-48-Q HSTTT19-48-Q HSTTT24-48-Q HSTTT30-48-Q HSTTT37-48-Q HSTTT43-48-Q HSTTT47-48-Q HSTTT56-48-5 HSTTT66-48-5 HSTTT75-48-5 HSTTT93-48-5 HSTTT112-48-5 HSTTT131-48-2 HSTTT150-48-2 30 AWG 28 AWG 26 AWG 24 AWG 22 AWG 20 AWG 18 AWG 16 AWG 14 AWG 12 AWG 10 AWG 8 AWG 6 AWG 4 AWG 2 AWG 0 AWG 9/16 5/8 3/4 15/16 1 1/8 1 5/16 1 1/2 .034 (0.9) .038 (1.0) .046 (1.2) .050 (1.3) .055 (1.4) .060 (1.5) .076 (1.9) .093 (2.3) .120 (3.0) .150 (3.8) .191 (4.9) .240 (6.0) .302 (7.7) .370 (9.4) .430 (10.9) .470 (11.9) .560 (14.2) .655 (16.6) .750 (19.0) .930 (23.6) 1.125 (28.6) 1.310 (33.3) 1.500 (38.1) .015 (0.4) .018 (0.5) .022 (0.5) .027 (0.7) .032 (0.8) .039 (1.0) .049 (1.2) .061 (1.6) .072 (1.8) .089 (2.3) .112 (2.8) .141 (3.6) .178 (4.5) .224 (5.7) .278 (7.0) .347 (8.8) .399 (10.1) .462 (11.7) .524 (13.3) .655 (16.6) .786 (20.0) .911 (23.1) 1.036 (26.3) .009 (0.2) .009 (0.2) .010 (0.3) .010 (0.3) .012 (0.3) .012 (0.3) .012 (0.3) .012 (0.3) .012 (0.3) .012 (0.3) .012 (0.3) .015 (0.4) .015 (0.4) .015 (0.4) .015 (0.4) .015 (0.4) .015 (0.4) .018 (0.5) .018 (0.5) .020 (0.5) .025 (0.6) .030 (0.8) .030 (0.8) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 5 Pcs. 5 Pcs. 5 Pcs. 5 Pcs. 5 Pcs. 2 Pcs. 2 Pcs. *Order in multiples of std. pkg. qty. Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.'s. TEFLON is a registered trademark of E.I. Dupont de Nemours Co. Most commonly used parts appear in BOLD. 149 KYNAR DRY-SHRINK TM Heat Shrink Tubing HSTTK KYNAR Heat Shrink * * * * * For dry locations Semi-rigid, highly heat resistant Offers excellent chemical and abrasion resistance Use in high temperature or solvent rich environment Color is milky clear Type Material Polyvinylidene Fluoride HSTTK 600V -67F to 347F (-55C to 175C) Semi-Rigid Shrink Ratio: 2:1 AMS-DTL-23053/8 VW-1 Highly Flame Retardant VW-1 HSTTK in Standard Packages -- 4' (1.2m) Pieces Part Number HSTTK05-48-Q HSTTK06-48-Q HSTTK09-48-Q HSTTK12-48-Q HSTTK19-48-Q HSTTK25-48-Q HSTTK38-48-Q HSTTK50-48-5 HSTTK75-48-5 HSTTK100-48-5 150 Nominal Diameter in. Minimum Expanded I.D. in. (mm) Maximum Recovered I.D. in. (mm) Nominal Recovered Wall Thickness in. (mm) Length Feet (m) Std. Pkg. Qty.* 3/64 1/16 3/32 1/8 3/16 1/4 3/8 1/2 3/4 1 .046 (1.2) .063 (1.6) .093 (2.4) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .750 (19.0) 1.00 (25.4) .023 (0.6) .031 (0.8) .046 (1.2) .062(1.6) .093 (2.4) .125(3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .010 (0.3) .010 (0.3) .010 (0.3) .010 (0.3) .010 (0.3) .010 (0.3) .012 (0.3) .012 (0.3) .017 (0.4) .019 (0.5) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 5 Pcs. 5 Pcs. 5 Pcs. Most commonly used parts appear in BOLD. *Order in multiples of std. pkg. qty. Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.'s. KYNAR is a registered trademark of Atofina Chemicals, Inc. Dual Wall Polyolefin DAMP-SHRINK TM Heat Shrink Tubing HSTTVA Heat Shrink * For damp locations * Flexible tubing with an adhesive inner wall which seals and protects components from moisture and corrosion Type Materials Polyolefin Cross-Linked with Adhesive HSTTVA 600V -67F to 230F (-55C to 110C) AMS-DTL-23053/4 Class 2 Flexible Shrink Ratio: 2:1 Outer Wall Flame Retardant HSTTVA in Standard Packages -- 4' (1.2m) Pieces -- Black Only Nominal Diameter in. Part Number HSTTVA12-48-Q HSTTVA19-48-Q HSTTVA25-48-Q HSTTVA38-48-Q HSTTVA50-48-5 HSTTVA75-48-5 HSTTVA100-48-5 HSTTVA150-48-5 1/8 3/16 1/4 3/8 1/2 3/4 1 1 1/2 Minimum Maximum Expanded I.D. Recovered I.D. in. (mm) in. (mm) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .750 (19.0) 1.00 (25.4) 1.50 (38.1) .062 (1.6) .093 (2.4) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .750 (19.0) Nominal Recovered Wall Thickness in. (mm) Length Feet (m) Std. Pkg. Qty.* .020 (0.5) .022 (0.6) .030 (0.8) .031 (0.8) .032 (0.8) .037 (0.9) .046 (1.2) .049 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 5 Pcs. 5 Pcs. 5 Pcs. 5 Pcs. Standard Packs of HSTTVA Heat Shrink -- 6" (152.4mm) Pieces HSTTVA -- Black Only -- Single Diameter Part Number HSTTVA12-Y HSTTVA19-Y HSTTVA25-Y HSTTVA38-Y HSTTVA50-Y HSTTVA75-Y HSTTVA100-Y Nominal Minimum Maximum Diameter Expanded I.D. Recovered I.D. in. in. (mm) in. (mm) 1/8 3/16 1/4 3/8 1/2 3/4 1 .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .750 (19.0) 1.00 (25.4) .062 (1.6) .093 (2.4) .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) Std. Pkg. Qty.* Std. Ctn. Qty. 7 pcs. 7 pcs. 5 pcs. 4 pcs. 4 pcs. 3 pcs. 2 pcs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. *Order in multiples of std. pkg. qty. Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.'s. Most commonly used parts appear in BOLD. 151 Dual Wall Polyolefin DAMP-SHRINK TM Heat Shrink Tubing HSTTA Heat Shrink * For damp locations * Flexible tubing with adhesive inner wall, seals and protects components from moisture and corrosion * The 3:1 shrink ratio is a benefit when working with connector to cable transitions Type Materials Polyolefin CrossLinked with Adhesive HSTTA 600V -67F to 230F (-55C to 110C) AMS-DTL-23053/4 Class 3 Flexible Shrink Ratio: 3:1 Outer Wall Flame Retardant HSTTA in Standard and Bulk Packages -- 4' (1.2m) Pieces -- Black Only Part Number HSTTA19-48-Q HSTTA25-48-Q HSTTA25-48-TL HSTTA38-48-Q HSTTA38-48-TL HSTTA50-48-5 HSTTA50-48-T HSTTA75-48-5 HSTTA75-48-C HSTTA100-48-5 HSTTA100-48-L HSTTA150-48-5 HSTTA150-48-Q Nominal Diameter in. 3/16 1/4 1/4 3/8 3/8 1/2 1/2 3/4 3/4 1 1 1 1/2 1 1/2 Minimum Expanded I.D. in. (mm) .187 (4.8) .250 (6.4) .250 (6.4) .375 (9.5) .375 (9.5) .500 (12.7) .500 (12.7) .750 (19.0) .750 (19.0) 1.00 (25.4) 1.00 (25.4) 1.50 (38.1) 1.50 (38.1) Maximum Recovered I.D. in. (mm) .062 (1.6) .080 (2.0) .080 (2.0) .120 (3.0) .120 (3.0) .160 (4.1) .160 (4.1) .250 (6.4) .250 (6.4) .320 (8.1) .320 (8.1) .510 (12.9) .510 (12.9) Nominal Recovered Wall Thickness in. (mm) .040 (1.0) .040 (1.0) .040 (1.0) .055 (1.4) .055 (1.4) .070 (1.8) .070 (1.8) .085 (2.2) .085 (2.2) .100 (2.5) .100 (2.5) .100 (2.5) .100 (2.5) Length Feet (m) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) Std. Pkg. Qty.* 25 Pcs. 25 Pcs. 250 Pcs. 25 Pcs. 250 Pcs. 5 Pcs. 200 Pcs. 5 Pcs. 100 Pcs. 5 Pcs. 50 Pcs. 5 Pcs. 25 Pcs. Standard Packs of HSTTA Heat Shrink -- 6" (152.4mm) Pieces HSTTA -- Black Only -- Single Diameter Part Number HSTTA19-Y HSTTA25-Y HSTTA38-Y HSTTA50-Y HSTTA75-Y HSTTA100-Y HSTTA150-Y 152 Nominal Minimum Maximum Diameter Expanded I.D. Recovered I.D. in. in. (mm) in. (mm) 3/16 1/4 3/8 1/2 3/4 1 1 1/2 .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .750 (19.0) 1.00 (25.4) 1.50 (38.1) Most commonly used parts appear in BOLD. .062 (1.6) .080 (2.0) .120 (3.0) .160 (4.1) .250 (6.4) .320 (8.1) .510 (12.9) Std. Pkg. Qty.* Std. Ctn. Qty. 6 pcs. 4 pcs. 3 pcs. 3 pcs. 2 pcs. 2 pcs. 1 pcs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. *Order in multiples of std. pkg. qty. Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.'s Dual Wall Polyolefin DAMP-SHRINK TM Heat Shrink Tubing HSTTRA Heat Shrink * For damp locations * Semi-rigid tubing * Adhesive inner wall which seals and protects components from moisture and corrosion * Provides a rugged seal from the elements Materials Type Polyolefin Cross-Linked with Adhesive HSTTRA 600V Semi-Rigid -67F to 230F (-55C to 110C) AMS-DTL-23053/4 Class 1 Shrink Ratio: 2.5:1 HSTTRA in Standard Packages -- 4' (1.2m) Pieces -- Black Only Part Number HSTTRA12-48-Q HSTTRA19-48-Q HSTTRA25-48-Q HSTTRA38-48-Q HSTTRA50-48-5 HSTTRA75-48-5 HSTTRA100-48-5 Nominal Diameter in. Minimum Expanded I.D. in. (mm) Maximum Recovered I.D. in. (mm) Nominal Recovered Wall Thickness in. (mm) Length Feet (m) Std. Pkg. Qty.* 1/8 3/16 1/4 3/8 1/2 3/4 1 .125 (3.2) .187 (4.8) .250 (6.4) .375 (9.5) .500 (12.7) .750 (19.0) 1.00 (25.4) .023 (0.6) .060 (1.5) .080 (2.0) .135 (3.4) .195 (5.0) .313 (8.0) .400 (10.6) .038 (1.0) .043 (1.1) .047 (1.2) .050 (1.3) .059 (1.5) .065 (1.7) .075 (1.9) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 25 Pcs. 25 Pcs. 25 Pcs. 25 Pcs. 5 Pcs. 5 Pcs. 5 Pcs. *Order in multiples of std. pkg. qty. Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.'s. Most commonly used parts appear in BOLD. 153 Thick Wall Polyolefin WET-SHRINK TM Heat Shrink Tubing HST Thick Wall Heat Shrink * Suitable for wet locations and direct burial according to UL 486D * Provides excellent protection above or below ground level * Adhesive lined inner wall seals and protects against moisture Type Material Polyolefin Cross-Linked with Adhesive HST (Black Only) Including HST3.0 600V -85F to 230F (-65C to 110C) AMS-DTL-23053/15 (HST only) Listed 6R72 (except HST3.0) Rigid Shrink Ratio: 3:1 Flame Retardant Thick Wall Heat Shrink Part Number System HST Type HST 0.4 - Expanded Diameter 0.4 = .40" (10.2mm) 0.8 = .80" (20.3mm) 1.1 = 1.10" (27.9mm) 1.5 = 1.50" (38.1mm) 2.0 = 2.00" (50.8mm) 3.0 = 3.00" (76.2mm) 3 - Q Tube Length 3 = 3" (76.2mm) 6 = 6" (152.4mm) 9 = 9" (228.6mm) 12 = 12" (304.8mm) 48 = 4' (1.2m) 2 Package Quantity 1 = 1 Pc. 2 = 2 Pcs. 3 = 3 Pcs. 5 = 5 Pcs. X = 10 Pcs. Q = 25 Pcs. Color None = Black 2 = Red HST in Standard Packages Part Number (Black) Minimum Maximum Nominal Expanded Recovered Recovered I.D. I.D. Wall Thickness in. (mm) in. (mm) in. (mm) HST0.4-3-Q HST0.4-6-3 .40 (10.1) .15 (3.8) HST0.4-6-X HST0.4-48-5 HST0.8-6-3 HST0.8-6-X HST0.8-9-X .80 (20.3) .25 (6.4) HST0.8-12-5 HST0.8-48-5 HST1.1-6-3 HST1.1-6-X HST1.1-9-2 1.10 (27.9) .37 (9.4) HST1.1-9-X HST1.1-12-5 HST1.1-48-5 HST1.5-9-X HST1.5-12-1 1.50 (38.1) .50 (12.7) HST1.5-12-5 HST1.5-48-5 HST2.0-9-5 HST2.0-12-2 2.00 (50.8) .67 (16.9) HST2.0-48-2 HST3.0-12-2 3.00(76.2) 1.00 (25.4) HST3.0-48-2 154 Most commonly used parts appear in BOLD. .09 (2.3) .11 (2.8) .12 (3.0) .17 (4.3) .17 (4.3) .17 (4.3) Conductor Size Range AWG/kcmil (mm2 ) Minimum Maximum Cable Connector Tube Length O.D. in. O.D. (mm) in. (mm) in. (mm) 3 (76.2) #12-#6 .170 .350 6 (152.4) (4-16) (4.3) (8.9) 6 (152.4) 4' (1.2M) 6 (152.4) 6 (152.4) #8-#1/0 .240 .650 9 (228.6) (10-55) (6.1) (16.5) 12 (304.8) 4' (1.2M) 6 (152.4) 6 (152.4) #2-#4/0 .400 .875 9 (228.6) (35-120) (10.1) (22.2) 9 (228.6) 12 (304.8) 4' (1.2M) 9 (228.6) #3/0-400 kcmil .600 1.190 12 (304.8) (95-185) (15.2) (30.2) 12 (304.8) 4' (1.2M) 9 (228.6) 250-600 kcmil .750 1.600 12 (304.8) (125-300) (19.1) (40.6) 4' (1.2M) 600-1250 kcmil 1.20 2.250 12 (304.8) (300-625) (30.5) (57.2) 4' (1.2M) Std. Pkg. Qty.* 25 PCS. 3 PCS. 10 PCS. 5 PCS. 3 PCS. 10 PCS. 10 PCS. 5 PCS. 5 PCS. 3 PCS. 10 PCS. 2 PCS. 10 PCS. 5 PCS. 5 PCS. 10 PCS. 1 PC. 5 PCS. 5 PCS. 5 PCS. 2 PCS. 2 PCS. 2 PCS. 2 PCS. Std. Ctn. Qty. 4 Pkgs. 10 Pkgs. 10 Pkgs. 4 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 4 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 4 Pkgs. 10 Pkgs. 10 Pkgs. 10 Pkgs. 4 Pkgs. 10 Pkgs. 10 Pkgs. 4 Pkgs. 10 Pkgs. 4 Pkgs. *Order in multiples of std pkg. qty. For red, add 2 to end of part number package suffix (example HST0.4-3-Q2). Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.'s. Polyolefin WET-SHRINK TM Thick Wall End Caps HSEC Thick Wall End Caps * For wet locations * Provides excellent protection for sealing ends of wire or cable * Adhesive lined inner wall seals and protects against moisture Type Materials Polyolefin Cross-Linked with Adhesive HSEC -67F to 221F (-55C to 105C) 600V Shrink Ratio: 3:1 Rigid Thick Wall End Caps Part Number System HSEC - 0.5 Type HSEC - X Expanded Diameter 0.5 = .47" (11.9mm) 0.8 = .79" (20.1mm) 1.0 = 1.02" (25.9mm) 1.5 = 1.58" (40.1mm) 2.0 = 2.25" (57.2mm) 4.0 = 4.14" (105.2mm) Package Quantity 2 = 2 Pcs. 5 = 5 Pcs. X = 10 Pcs. Thick Wall End Caps in Standard Packages -- Black Only Part Number Minimum Expanded I.D. in. (mm) Maximum Recovered I.D. in. (mm) Nominal Recovered Wall Thickness in. (mm) HSEC0.5-X HSEC0.8-X .47 (11.9) .79 (20.1) .18 (4.6) .30 (7.6) .10 (2.5) .10 (2.5) HSEC1.0-X HSEC1.5-5 1.02 (25.9) 1.58 (40.1) .45 (11.4) .68 (17.3) .10 (2.5) .11 (2.8) HSEC2.0-5 HSEC4.0-2 2.25 (57.2) 4.14 (105.2) .87 (22.1) 1.78 (45.2) .15 (3.8) .15 (3.8) Conductor Size Cap Length in. (mm) #8 TO #4 AWG (10 TO 25mm2 ) #4 TO 3/0 AWG (25 TO 95mm2) #2 TO 4/0 AWG (35 TO 95mm2) 250 TO 500 kcmil (120 TO 240mm2) 600 TO 1000 kcmil (300 TO 500mm2) 1500 TO 2000 kcmil (720 TO 1000mm2 ) *Order in multiples of std. pkg. qty. Shrink ratios are approximations; please refer to above ordering information for the exact min. expanded and max. recovered I.D.'s. Std. Pkg. Qty.* Std. Ctn. Qty. 1.38 (35.1) 10 PCS . 10 Pkgs. 2.13 (54.1) 10 PCS . 10 Pkgs. 3.23 (82.0) 10 PCS . 10 Pkgs. 3.86 (98.0) 5 PCS. 10 Pkgs. 5.52 (140.2) 5 PCS. 10 Pkgs. 6.90 (175.3) 2 PCS. 5 Pkgs. Most commonly used parts appear in BOLD. 155 Heat Shrink Tubing Kits Plastic Kit Boxes * Provides organized storage for a wide variety of parts in one convenient location * Informative label eliminates guess work: -- Specifies correct heat shrink usage based on wire range and connector size -- Provides reorder part number information * Once top is closed, loose pieces remain in their 6 compartments * Available with non-adhesive or adhesive lined heat shrink tubing for dry and damp locations KP-HSTT1 Contents For Dry Locations BLACK POLYOLEFIN DR Y-SH RINK TM HEAT SHR INK TUBIN G (TYPE HSTT) IN 6" (152.4mm) LEN GTH S 2:1 SHR INK RATIO AMS-DTL-23053/5 C LASS 1 35 EAC H HSTT09 3/32" (2.4mm) I.D. HSTT12 1/8" (3.2mm) I.D. 21 EAC H HSTT19 3/16" (4.8mm) I.D. HSTT25 1/4" (6.4mm) I.D. KP-HSTT2 Contents 7 EACH HSTT38 3/8" (9.5mm) I.D. HSTT50 1/2" (12.7mm) I.D. For Dry Locations TM M ULTIPLE COLOR POLYOL EFIN DRY -SHR INK HEAT SH RINK TUBING (TYPE HSTT) IN 6" (152.4mm) LENGTHS 2:1 SH RINK RATIO (Except Clear) 35 EACH HSTT09 3/32" (2.4mm) I.D. - 7 COLOR S HSTT12 1/8" (3.2mm) I.D. - 7 COLOR S (Except Clear) 21 EACH HSTT19 3/16" (4.8mm) I.D. - 7 COLOR S HSTT25 1/4" (6.4mm) I.D. - 7 COLOR S AMS-DTL-23053/5 C LASS 1 & 2 7 EAC H HSTT38 3/8" (9.5mm) I.D. - 7 COLOR S HSTT50 1/2" (12.7mm) I.D. - 7 COLOR S Note: Colors include: Red, Yellow, Green, Blue, White, Clear and Black. KP-HSTTA Contents For Damp Locations ADHESIVE LINED BLACK POLYOL EFIN DAMP-SH RINK TM HEAT SHR INK TUBING (TYPE HSTTA) IN 6" (152.4mm) L ENGTHS 3:1 SHR IN K RATIO AMS-DTL-23053/4 CLASS 3 14 EACH HSTTA19 3/16" (4.8mm) I.D. 10 EACH HSTTA38 3/8" (9.5mm) I.D. 3 EACH HSTTA75 3/4" (19.0mm) I.D. 12 EACH HSTTA25 1/4" (6.4mm) I.D. 6 EACH HSTTA50 1/2" (12.7mm) I.D. 2 EACH HSTTA100 1" (25.4mm) I.D. Order number of kits required. 156 Most commonly used parts appear in BOLD. Heat Shrink Tools and Accessories Mica insulation in the heat element provides extended life to HSG Heat Tools. Heat Tools Listed 826N (Heat Tools only) Part Number HSG-115V-650 Description * High temperature tool -- For use on PANDUIT (R) HSTT, HSTTA, HSTTF, HSTTR, HSTTK, HSTTRA, HST and HSEC * Air intake regulator varies temperature from 650F (344C) to 900F (482C) 115 Volt, 10 AMP * Neoprene jacketed cord with molded strain relief * Adjustable stand included * Replaceable bearings, brushes and heating elements HSG Heat tool with stand Heat Reflector Accessory slips onto heat tools HSG-A1 DCT -- Cutting Tool Std. Pkg. Qty 1 Accessories Part Number Heat Concentrator Accessory directs heat to reduce shrink time (Heat Tools only) Description * Shrink tube reflector for tubing up to 3/4" inside diameter * Directs heat around the tubing to reduce shrink time Std. Pkg. Qty 1 HSG-A2 * Shrink tube reflector for tubing up to 1 1/2" inside diameter * Directs heat around the tubing to reduce shrink time 1 HSG-A3 * Shrink tube concentrator * Directs heat toward tubing and away from heat sensitive items 1 HSG-A4 * Black polyethylene carrying case * Stores heat tool, stand and all three accessories 1 DCT * Cutting tool for use with HST Thick Wall Heat Shrink Tubing only 1 Replacement Parts Part Number HSG-P1 HSG-P2 HSG-P3 HSG-P7 Description * * * * Brush/Spring Kit Switch 20 Amp Bearing Kit Heat Element 650F Std. Pkg. Qty 1 1 1 1 Order number of heat tools, accessories and replacement parts required. Carrying Case Most commonly used parts appear in BOLD. 157 DRY-SHRINK TM, DAMP-SHRINK TM and WET-SHRINK TM Heat Shrink Tubing Technical Data Heat Shrink Installation Instructions General Instructions Position heat shrink over the object to be covered. Using a heat gun, soft yellow flame torch, infrared heat source or oven, evenly heat the tubing until it has fully recovered and conforms to the object. Use caution not to char or burn the tubing. Special Instructions for HSTTT TFE tubing is the most difficult to shrink due to its high shrink temperature. TFE shrink tubing must be heated to the gel state 621F (327C) to completely recover. This can be recognized when the tubing changes from milky white to clear color. It can be shrunk with a heat gun or torch, however, it is very difficult to use these methods since they have a tendency to overheat the tube in one area while other areas remain too cool. The most reliable way to shrink TFE is in an oven. Position the heat shrink over the object to be covered and place it in an oven set at 800F (427C) until the tubing turns clear. Once clear, remove assembly from oven to prevent over heating and allow it to cool at room temperature. Do not quench in cold air or water. Large objects, particularly metal tubing or rods, must be preheated to get a uniform shrink. Size Selection for Heat Shrink Tubing Generally, the largest tube that shrinks down tightly onto an object should be chosen. This allows the heat shrink tubing maximum stress relief and this will yield the longest service life. Example: A multi-conductor cable needs to be covered with HSTT Type DR Y-SHRINK TM Heat Shrink. The area to be covered has a measured outside diameter of .700" (17.8mm). The two possibilities are HSTT75-48-5 and HSTT100-48-5. Part Number HSTT75-48-5 HSTT100-48-5 Expanded I.D. in. (mm) Recovered I.D. in. (mm) .750 (19.0) 1.00 (25.4) .375 (9.5) .500 (12.7) The proper choice is HSTT100-48-5 since the tube will recover more than HSTT75-48-5. The HSTT75-48-5 will fit over the .700" (17.8mm) outside diameter; however, this is not the proper choice since it is smaller than the HSTT100-48-5. In general, heat shrink should recover at least 10-20% to reduce stress and yield 158 Most commonly used parts appear in BOLD. Heat Shrink Selection Guide Recommended Tubing Size for Common Wire Types Based on Location For Insulated Wire, Non-insulated Wire and Insulated Wire With Copper Connectors Instructions for tube selection: 1) Determine Location Type. LOCATION: DRY -- IP62: A location not normally subject to dampness or wetness. A location classified as dry may be temporarily subject to dampness or wetness, as in the case of a building under construction. DAMP -- IP66: Partially protected locations under canopies, marquees, roofed open porches, and like locations, and interior locations subject to moderate degrees of moisture, such as some basements, some barns and some cold-storage warehouses. WET -- IP68: Installations underground or in concrete slabs or masonry in direct contact with the earth, and locations subject to saturation with water or other liquids, such as vehicle washing areas, and locations exposed to weather and unprotected. 2) Match wire size to location type under required application -- insulated wire, non-insulated wire, or insulated wire with copper connectors. 3) Read corresponding part number. 4) Part numbers with "-Y" are packages containing 6" pieces. Part numbers with "-48" are 48" pieces. 5) Part numbers shown below are for black heat shrink. Consult relevant catalog section for color options. Wire Size DR Y -SHRINK TM 24 22 20 18 16 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0 250 300 350 400 500 600 700 750 800 900 1000 1250 1500 1750 2000 HSTT12-Y HSTT12-Y HSTT12-Y HSTT19-Y HSTT19-Y HSTT19-Y HSTT25-Y HSTT25-Y HSTT38-Y HSTT50-Y HSTT50-Y HSTT50-Y HSTT75-Y HSTT75-Y HSTT75-Y HSTT100-Y HSTT100-Y HSTT100-Y HSTT100-Y HSTT150-48-5 HSTT150-48-5 HSTT150-48-5 HSTT150-48-5 HSTT150-48-5 HSTT200-48-5 HSTT200-48-5 HSTT200-48-5 HSTT200-48-5 HSTT200-48-5 HSTT300-48-2 HSTT300-48-2 HSTT300-48-2 HSTT300-48-2 Insulated Wire with Copper Connector Insulated Wire Uninsulated Wire DAMP-SHR IN K TM WET -SH RINK TM DR Y -SHRINK TM DAMP-SHRINK TM WET-SHRINK TM DRY -SHR IN K TM DAMP WET -SHR IN K TM TM SHRINK HSTTA19-Y -- -- -- -- HSTT12-Y -- -- HSTTA19-Y -- -- -- -- HSTT12-Y -- -- HSTTA19-Y -- HSTT06-Y -- -- HSTT19-Y HSTTA19-Y -- HSTTA19-Y -- HSTT06-Y -- -- HSTT19-Y HSTTA19-Y -- HSTTA25-Y -- HSTT06-Y -- -- HSTT19-Y HSTTA25-Y -- HSTTA25-Y -- HSTT12-Y HSTTA19-Y -- HSTT19-Y HSTTA25-Y -- HSTTA38-Y HST0.4-48-5 HSTT12-Y HSTTA19-Y -- HSTT25-Y HSTTA38-Y HST0.4-48-5 HSTTA38-Y HST0.4-48-5 HSTT19-Y HSTTA25-Y -- HSTT25-Y HSTTA38-Y HST0.4-48-5 HSTTA50-Y HST0.4-48-5 HSTT25-Y HSTTA25-Y -- HSTT38-Y HSTTA50-Y HST0.4-48-5 HSTTA50-Y HST0.8-48-5 HSTT25-Y HSTTA38-Y HST0.4-48-5 HSTT50-Y HSTTA50-Y HST0.8-48-5 HSTTA75-Y HST0.8-48-5 HSTT38-Y HSTTA38-Y HST0.4-48-5 HSTT50-Y HSTTA75-Y HST0.8-48-5 HSTTA75-Y HST0.8-48-5 HSTT38-Y HSTTA50-Y HST0.4-48-5 HSTT50-Y HSTTA75-Y HST0.8-48-5 HSTTA100-Y HST0.8-48-5 HSTT50-Y HSTTA50-Y HST0.8-48-5 HSTT75-Y HSTTA100-Y HST0.8-48-5 HSTTA100-Y HST0.8-48-5 HSTT50-Y HSTTA50-Y HST0.8-48-5 HSTT75-Y HSTTA100-Y HST1.1-48-5 HSTTA100-Y HST1.1-48-5 HSTT50-Y HSTTA75-Y HST0.8-48-5 HSTT75-Y HSTTA100-Y HST1.1-48-5 HSTTA100-Y HST1.1-48-5 HSTT50-Y HSTTA75-Y HST0.8-48-5 HSTT100-Y HSTTA100-Y HST1.1-48-5 HSTTA150-Y HST1.1-48-5 HSTT75-Y HSTTA100-Y HST0.8-48-5 HSTT100-Y HSTTA150-Y HST1.5-48-5 HSTTA150-Y HST1.5-48-5 HSTT75-Y HSTTA100-Y HST1.1-48-5 HSTT100-Y HSTTA150-Y HST1.5-48-5 HSTTA150-Y HST1.5-48-5 HSTT100-Y HSTTA100-Y HST1.1-48-5 HSTT100-Y HSTTA150-Y HST1.5-48-5 HSTTA150-Y HST1.5-48-5 HSTT100-Y HSTTA100-Y HST1.1-48-5 HSTT150-Y HSTTA150-Y HST1.5-48-5 HSTTA150-Y HST1.5-48-5 HSTT100-Y HSTTA150-Y HST1.5-48-5 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTTA150-Y HST2.0-48-2 HSTT100-Y HSTTA150-Y HST1.5-48-5 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTTA150-Y HST2.0-48-2 HSTT100-Y HSTTA150-Y HST1.5-48-5 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTTA150-Y HST2.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTTA150-Y HST2.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTT200-48-5 -- HST2.0-48-2 HSTTA150-Y HST3.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTT200-48-5 -- HST3.0-48-2 -- HST3.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTT200-48-5 -- HST3.0-48-2 -- HST3.0-48-2 HSTT150-48-5 HSTTA150-Y HST2.0-48-2 HSTT200-48-5 -- HST3.0-48-2 -- HST3.0-48-2 HSTT200-48-5 HSTTA150-Y HST2.0-48-2 HSTT200-48-5 -- HST3.0-48-2 -- HST3.0-48-2 HSTT200-48-5 HSTTA150-Y HST2.0-48-2 -- -- HST3.0-48-2 -- HST3.0-48-2 HSTT200-48-5 -- HST3.0-48-2 -- -- -- -- HST3.0-48-2 HSTT200-48-5 -- HST3.0-48-2 -- -- -- -- HST3.0-48-2 HSTT200-48-5 -- HST3.0-48-2 -- -- -- Sizing information is based on the following wire types: MTW, THHN, THWN, TFN, THW, TW, TF, RHW, RH, RHH AND UL1015. THHN is the most common wire type. Portions reprinted with permission from NFPA, the National Electrical Code (R) Handbook, Copyright(c) 1996, National Fire Protection Association, Quincy, MA 02269. All rights reserved. National Electrical Code (R) and NEC (R) are registered trademarks of the National Fire Protection Association, Inc., Quincy, MA 02269. 159 IP (Ingress Protection) as defined by the International Standard IEC 529 The IEC 529 international standard describes a system for classifying the degrees of protection provided by the enclosures of electrical equipment and is a recognized standard around the world. An independent test laboratory has tested PANDUIT (R) Heat Shrink Tubing to the IEC 529 standard. The following information exhibits the IP ratings for PANDUIT (R) Heat Shrink tubing and how each of the IP ratings relates to the USA. IP x x Ingress Protection The first characteristic numeral indicates the level of protection against the ingress of solid foreign objects. The second characteristic numeral indicates the level of protection against the ingress of water. 1st Characteristic Numeral 2nd Characteristic Numeral 1st Characteristic Numeral Ingress PANDUIT (R) Protection Meaning for Heat Shrink (IP) Protection DR Y -SHRINK TM, DAMP-SHR IN K TM and WET -SHRINK TM Against ingress of solid object 0 1 2 3 4 5 6 Non-Protected 50mm diameter 12.5mm diameter 2.5mm diameter 1.0mm diameter Dust Protected Dust Tight 2nd Characteristic Numeral Ingress PANDUIT (R) Protection Meaning for Heat Shrink (IP) Protection DR Y-SH RINK TM Heat Shrink Tubing DAMP -SHRINK TM Heat Shrink Tubing WET-SH RINK TM Heat Shrink Tubing Intended Application Location: Ingress Protection Rating: Against ingress of water 0 1 2 3 4 5 6 7 8 Non-Protected Vertically Dripping Dripping (15 tilted) Spraying Splashing Jetting Powerful Jetting Temporary Immersion Continuous Immersion Description: DRY Locations not normally subject to moisture Protected against the ingress of dust but not protected against the ingress of water. DAMP Locations subjected to moderate degrees of water and moisture Protected against the ingress of dust and protected against the ingress of a power jet of water. WET Locations are defined as underground burial or immersion in water Protected against the ingress of dust and protected against the ingress of water to a depth of 10 meters. Does not include PANDUIT (R) DRY-SHRINK TM HSTTT (TEFLON --TFE) DR Y -SHRINK TM Heat Shrink has been tested in accordance with EN 60529 paragraph 13.4 thereby providing PANDUIT (R) DRY -SHR INK TM Heat Shrink with an ingress protection rating of IP62. DAMP -SHRINK TM Heat Shrink has been tested in accordance with EN 60529 paragraph 13.4 and with paragraph 14.2.6 thereby providing PANDUIT (R) DAMP-SHRINK TM with an ingress protection rating of IP66. WET-SHRINK TM Heat Shrink has been tested in accordance with EN 60529 paragraph 13.4, paragraph 14.2.6 and with paragraph 14.2.7 thereby providing WET-SHRINK TM Heat Shrink with an ingress protection rating of IP68. PANDUIT (R) WET-SHRINK TM Heat Shrink has passed EN 60529 paragraph 14.2.7 at depth of 10 meters. 160 Most commonly used parts appear in BOLD. DRY-SHRINK TM , DAMP-SHRINK TM and WET-SHRINK TM Heat Shrink Tubing Technical Data General Information Product Type Typical Applications Specific Water Gravity Flammability Absorption Dielectric Strength Page No. HSTT Economical and easy way to insulate, protect, Class 1, harness and identify electrical and electronic 1.35 components in a wide variety of applications. Class 2, Black is U.V. Resistant. 1.0 ASTM D792 Class 1 Self 0.5% MAX. Extinguishing ASTM Class 2 N/A D570 ASTM D2671 Procedure B 500 V/MIL. (19.7 Kv/mm) min. ASTM D2671 141144 HSTTV Use where UL recognition with VW-1 rating is required. Use where the wire component cannot tolerate higher shrink temperatures, reduces application time to insulate, protect, identify, etc. Black is U.V. Resistant. 1.50 ASTM D792 Self 0.5% MAX. Extinguishing ASTM ASTM D2671 D570 Procedure C 500 V/MIL. (19.7 Kv/mm) min. ASTM D2671 145146 HSTTVA Seals and protects components from moisture and corrosion. Use where a flexible tubing is needed. Suitable for damp locations. N/A Self 0.5% MAX. Extinguishing ASTM ASTM D2671 D570 Procedure B 500 V/MIL. (19.7 Kv/mm) min. ASTM D2671 151 HSTTRA Environmentally seals and protects components forming a rugged and heavy duty covering. The 2.5:1 shrink ratio is a benefit when working with connector to cable transitions. Suitable for damp locations. N/A 0.5% MAX. ASTM D570 500 V/MIL. (19.7 Kv/mm) min. ASTM D2671 153 HSTTA Environmentally seals and protects components. The 3:1 shrink ratio is a benefit when working with connector to cable transitions. Suitable for damp locations. N/A Self 1.0% MAX. Extinguishing ASTM ASTM D2671 D570 Procedure B 300 V/MIL. (11.8 Kv/mm) min. ASTM D2671 152 HST Seals and protects electrical connections and 1.2 MAX. Self 0.5% MAX. splices above or below ground, 3:1 shrink Extinguishing ASTM ratio. Suitable for outdoor and wet locations. ASTM D2671 D570 Procedure C 200 V/MIL. (7.9 Kv/mm) min. ASTM D2671 154 HSTTP Ripple free conformance around sharp bends as in appliance handles and bus bars. Good cut through and solder-iron resistance. Black is U.V. Resistant. 1.35 MAX. Self 1.0% MAX. Extinguishing ASTM ASTM D876 D570 400 V/MIL. (15.8 Kv/mm) min. ASTM D2671 147 HSTTN Insulation and abrasion resistance, extensive military uses on vehicles and ship-board. Excellent chemical resistance especially to fuels and oils. Black is U.V. Resistant. 1.30 ASTM D792 Self 1.0% MAX. Extinguishing ASTM ASTM D876 D570 300V/MIL. (11.8 Kv/mm) min. ASTM D2671 148 HSTTK Protection and strain relief for wires or connectors in a high temperature or solvent rich environment. Insulation of heater leads. 1.8 MAX. ASTM D792 Pass MIL-DTL23053/8B 4.6.15.3 0.5% MAX. ASTM D570 Size to .500" (12.7mm) 800V/MIL. (31.5 Kv/mm)min. Over .500" (12.7mm) 600 V/MIL (23.6 Kv/mm) min. ASTM D2671 150 HSTTT High insulation and abrasion resistance. High 2.2 MAX. temperature, strain relief, resists corrosive ASTM atmospheres, self lubrication and nonD792 wetting. Can be used with fiber optics and as a strain relief for high density connectors. It is U.V. Resistant N/A Nonflammable 0.01% MAX. ASTM D570 800 V/MIL. (31.5 Kv/mm) min. ASTM D2671 149 N/A Most commonly used parts appear in BOLD. 161 PVC Tubing Non-Shrink PVC Tubing * Provides insulation and protection for lead wires, wire harness assemblies, soldered joints and components in electrical and electronic equipment * Material: Polyvinyl chloride (PVC) * Voltage Rating: 300V and 600V * All purpose, flexible, non-shrinkable * Resistant to heat and moisture * Applicable Specifications: UL224 VW-1 CSA C22.2 No. 198.1 (OFT) ASTM D-922, Grade CFR MIL-I-631, Type F, Form U, Grade C Class 1, Category 1 VW-1 OFT The Functional Part Number System Makes Ordering Easy Non-Shrink PVC Tubing Part Number System TV105 - 19 M Type Polyvinyl Chloride Tubing 162 Most commonly used parts appear in BOLD. Nominal Size 22 = 22 AWG 4 = 4 AWG 20 = 20 AWG 3 = 3 AWG 19 = 19 AWG 2 = 2 AWG 18 = 18 AWG 1 = 1 AWG 16 = 16 AWG 0 = 0 AWG 15 = 15 AWG .25 = 1/4" 14 = 14 AWG .31 = 5/16" 12 = 12 AWG .38 = 3/8" 10 = 10 AWG .44 = 6/16" 9 = 9 AWG .50 = 1/2" 8 = 8 AWG .56 = 9/16" 7 = 7 AWG .63 = 5/8" 6 = 6 AWG .75 = 3/4" 5 = 5 AWG 1.0 = 1" Package Quantity L = 50' (15.2m) C = 100' (30.5m) TL = 250' (76.2m) D = 500' (152.4m) M = 1000' (304.8m) 2.5M = 2500' (762m) PVC Tubing Non-Shrink PVC Tubing Type Materials Polyvinyl Chloride TV105 VW-1 OFT Part Number Black Nominal Size/ Trade Name Inside Diameter -- in. (mm) Part Number Clear Maximum Minimum TV105-242.5M TV105-222.5M TV105-20M TV105-19M TV105-18M TV105-17M TV105-16M TV105-15M TV105-14M TV105-13M TV105-12D TV105-11D TV105-10D TV105-9D TV105-8D TV105-7D TV105-6TL TV105-5TL TV105-4TL TV105-3TL TV105-2TL TV105-242.5M20 TV105-222.5M20 TV105-20M20 TV105-19M20 TV105-18M20 TV105-17M20 TV105-16M20 TV105-15M20 TV105-14M20 TV105-13M20 TV105-12D20 TV105-11D20 TV105-10D20 TV105-9D20 TV105-8D20 TV105-7D20 TV105-6TL20 TV105-5TL20 TV105-4TL20 TV105-3TL20 TV105-2TL20 24 AWG 22 AWG 20 AWG 19 AWG 18 AWG 17 AWG 16 AWG 15 AWG 14 AWG 13 AWG 12 AWG 11 AWG 10 AWG 9 AWG 8 AWG 7 AWG 6 AWG 5 AWG 4 AWG 3 AWG 2 AWG .027 .032 .039 .042 .049 .053 .061 .066 .072 .080 .089 .101 .112 .124 .141 .158 .178 .198 .224 .249 .278 (0.68) (0.81) (0.99) (1.06) (1.24) (1.34) (1.54) (1.67) (1.82) (2.03) (2.26) (2.56) (2.84) (3.14) (3.58) (4.01) (4.52) (5.02) (5.68) (6.32) (7.06) .020 (0.51) .025 (0.69) .032 (0.81) .036 (0.91) .040 (1.02) .045 (1.14) .051 (1.30) .057 (1.45) .064 (1.63) .072 (1.83) .081 (2.06) .091 (2.31) .102 (2.59) .114 (2.90) .129 (3.28) .144 (3.66) .162 (4.11) .182 (4.62) .204 (5.18) .229 (5.82) .258 (6.55) TV105-1TL TV105-0TL TV105-1TL20 1 AWG .311 (7.89) TV105-0TL20 TV105-.25TL20 TV105-.31TL20 TV105-.38TL20 TV105-.44TL20 TV105-.50TL20 TV105-.56C20 TV105-.63C20 TV105-.75C20 TV105-.88C20 TV105-1.0L20 TV105-1.25L20 TV105-1.50L20 0 AWG 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1/4 1 1/2 .347 (8.81) .265 (6.73) .334 (8.48) .399 (10.13) .462 (11.73) .524 (13.30) .585 (14.85) .655 (16.63) .786 (19.96) .911 (23.13) 1.036 (26.31) 1.290 (32.76) 1.550 (39.37) TV105-.25TL TV105-.31TL TV105-.38TL TV105-.44TL TV105-.50TL TV105-.56C TV105-.63C TV105-.75C TV105-.88C TV105-1.0L TV105-1.25L TV105-1.50L *Order in multiples of std. pkg. qty. **UL voltage rating is a function of wall thickness. 300V/600V** -4F to 221F (-20C to 105C) MIL-I-631,Type F, Form U Grade C Class 1, Cat 1 Highly Flexible Oil Resistant Highly Flame Retardant VW-1 Wall Max. Thickness Volt in. (mm) Rating** Std. Pkg. Qty.* Std. Ctn. Qty. 2500 (762m) 2500 (762m) 1000 (304.8m) 1000 (304.8m) 1000 (304.8m) 1000 (304.8m) 1000 (304.8m) 1000 (304.8m) 1000 (304.8m) 1000 (304.8m) 500 (152.4m) 500 (152.4m) 500 (152.4m) 500 (152.4m) 500 (152.4m) 500 (152.4m) 250 (76.2m) 250 (76.2m) 250 (76.2m) 250 (76.2m) 250 (76.2m) 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels .289 (7.34) 250 (76.2m) 2 Reels .325 (8.26) .245 (6.22) .313 (7.95) .375 (9.53) .438 (11.13) .500 (12.70) .563 (14.30) .625 (15.88) .750 (19.05) .875 (22.23) 1.000 (25.40) 1.250 (31.75) 1.500 (38.10) 250 (76.2m) 250 (76.2m) 250 (76.2m) 250 (76.2m) 250 (76.2m) 250 (76.2m) 100 (30.5m) 100 (30.5m) 100 (30.5m) 100 (30.5m) 50 (15.2m) 50 (15.2m) 50 (15.2m) 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels 2 Reels .012 (.30) .016 (.41) 300V .020 (.51) .025 (.64) .030 (.76) .035 (.89) .040 (1.02) .045 (1.14) 600V Most commonly used parts appear in BOLD. 163 Spiral Wrap Spiral Wrap U.L. Recognized * Large variety of colors, materials and sizes * Available in seven different materials and twelve different colors * Can be used to color code wire bundles * Flexible, neat, fast * Allows breakouts of single/multiple wires and rerouting of replacement wires * Harness multiple cables into a single manageable bundle * Abrasion protection for wires, cables, hoses and tubing * Reusable * Tool supplied in each package Suggested Applications * Organize wires for communication and computer equipment where access to the wires is required * In OEM applications for protecting tubes and harnesses * Abrasion protection for control panel wiring * Personal computer and printer wire organization * Protect glass tubes from abrasion and breakage * Kink-proofing for all kinds of tubing... ideal for laboratories * Eliminates lacing cord and tie-offs * Use orange or yellow spiral wrap for protecting and identifying fiber optic cables 164 Most commonly used parts appear in BOLD. Spiral Wrap The Functional Part Number System Makes Ordering Easy Spiral Wrap Part Number Description T Type T = Spiral Wrap Outside Diameter 12 = 1/8" 25 = 1/4" 38 = 3/8" 50 = 1/2" 62 = 5/8" 75 = 3/4" 100 = 1" 25 F - C 16 Material F = Polyethylene and Weather Resistant Polyethylene R = Fire Resistant - UL94V-2 FR = Flame Retardant - UL94V-0 N = Nylon T = TEFLON Package Quantity X = 10' Q = 25' L = 50' C = 100' T = 200' TL = 250' D = 500' M = 1000' Color Suffix See Table Below Material Availability Weather Flame Resistant Fire Resistant Retardant Polyethylene Polyethylene Polyethylene Polyethylene Color Color Suffix* Natural (Opaque to Translucent) No Suffix will be listed Weather Resistant Black 0 Brown 1 (Natural (Natural color is white) color is white) Nylon Weather Resistant Nylon Red 2 Orange 3 Yellow 4 Green 5 Blue 6 Purple 7 Gray 8 White 10 Pink 16 Black 20 TEFLON Blank = Not applicable *Colors are stocked for 1/4" and 1/2" polyethylene. Other sizes available, contact PANDUIT (R) Technical Assistance 866-405-6657. TEFLON or equivalent fluorocarbon PTFE material is used. TEFLON is a registered trademark of E.I. DuPont de Nemours Co. Most commonly used parts appear in BOLD. 165 Spiral Wrap B A U.L. Recognized T Part Number Material T12F-C T19F-C T25F-X T25F-C T25F-C1 T25F-C10 T25F-C16 T25F-C2 T25F-C3 T25F-C4 T25F-C5 T25F-C6 T25F-C7 T25F-C8 T38F-C Polyethylene T50F-X T50F-C T50F-C1 T50F-C10 T50F-C16 T50F-C2 T50F-C3 T50F-C4 T50F-C5 T50F-C6 T50F-C7 T50F-C8 T62F-C T75F-C T100F-C T12F-C0 T19F-C0 T25F-X0 T25F-C0 Weather T38F-C0 Resistant T50F-X0 Polyethylene T50F-C0 T62F-C0 T75F-C0 T100F-C0 166 Color A Outside Dia. in. (mm) B in. (mm) T in. (mm) Bundle Size in. (mm) .125 (3.2) .188 (4.8) .218 (5.5) .250 (6.4) .03 (.76) .035 (.89) .064 (1.6) - .50 (12.7) .125 (3.2) - 1.00 (25.4) Natural Brown White Pink Red Orange Yellow Green Blue Purple Gray .25 (6.4) .375 (9.5) .04 (1.02) .188 (4.8) - 2.00 (50.8) 100 (30.5) .375 (9.5) Natural Black Most commonly used parts appear in BOLD. 100 (30.5) 10 (3.0) .437 (11.1) .055 (1.4) .316 (7.9) - 3.00 (76.2) 10 (3.0) Natural Brown White Pink Red Orange Yellow Green Blue Purple Gray Std. Pkg. Qty.* Ft. (m) .50 (12.7) .50 (12.7) .06 (1.5) .38 (9.5) - 4.00 (101.6) 100 (30.5) .625 (15.9) .75 (19.1) 1 (25.4) .125 (3.2) .188 (4.8) .625 (15.9) .875 (22.2) 1.125 (28.6) .218 (5.5) .250 (6.4) .062 (1.57) .065 (1.65) .07 (1.78) .03 (.760) .035 (0.89) .50 (12.7) - 4.50 (114.3) .625 (15.9) - 5.00 (127.0) .875 (22.2) - 6.00 (152.4) .064 (1.6) - .50 (12.7) .125 (3.2) - 1.00 (25.4) .25 (6.4) .375 (9.5) .04 (1.02) .188 (4.8) - 2.00 (50.8) .375 (9.5) .437 (11.1) .055 (1.4) .316 (7.9) - 3.00 (76.2) .5 (12.7) .5 (12.7) .06 (1.5) .375 (9.5) - 4.00 (101.6) .625 (15.9) .75 (19.1) 1 (25.4) .625 (15.9) .875 (22.2) 1.125 (28.6) .062 (1.57) .065 (1.65) .07 (1.78) .50 (12.7) - 4.50 (114.3) .625 (15.9) - 5.00 (127.0) .875 (22.2) - 6.00 (152.4) 10 (3.0) 100 (30.5) 10 (3.0) 100 (30.5) *Order in multiples of standard package quantity. Note: Custom cut-to-length sizes are available upon request. Contact PANDUIT (R) Technical Assistance 866-405-6657 for details. Spiral Wrap B A U.L. Recognized T Part Number T12R-C T19R-C T25R-C T25R-C20 T38R-C T50R-C T62R-C T75R-C T100R-C T12FR-C T12FR-C20 T19FR-C T19FR-C20 T25FR-C T25FR-C20 T38FR-C T38FR-C20 T50FR-C T50FR-C20 T62FR-C T62FR-C20 T75FR-C T75FR-C20 T100FR-C T100FR-C20 T12N-C T12N-C0 T19N-C T19N-C0 T25N-C T25N-C0 T38N-C T38N-C0 T50N-C T50N-C0 T62N-C T62N-C0 T75N-C T75N-C0 T100N-C T100N-C0 T12T-C T19T-C T25T-L T50T-Q T62T-Q T75T-X T100T-X Material Color Natural Natural Natural Fire Black Resistant Natural Polyethylene Natural UL94V-2 Natural Natural Natural Natural Black Natural Black Natural Black Natural Flame Black Retardant Polyethylene Natural Black UL94V-0 Natural Black Natural Black Natural Black Natural Black Natural Black Natural Black Nylon (Black Natural Black is Weather Natural Resistant Black Nylon) Natural Black Natural Black Natural Black Natural Natural Natural TEFLON Natural Natural Natural Natural A Outside Dia. in. (mm) B in. (mm) T in. (mm) Bundle Size in. (mm) Std. Pkg. Qty.* Ft. (m) .125 (3.2) .188 (4.8) .25 (6.4) .25 (6.4) .375 (9.5) .50 (12.7) .625 (15.9) .75 (19.1) 1.00 (25.4) .125 (3.2) .125 (3.2) .188 (4.8) .188 (4.8) .25 (6.4) .25 (6.4) .375 (9.5) .375 (9.5) .50 (12.7) .50 (12.7) .625 (15.9) .625 (15.9) .75 (19.1) .75 (19.1) 1.00 (25.4) 1.00 (25.4) .125 (3.2) .125 (3.2) .188 (4.8) .188 (4.8) .25 (6.4) .25 (6.4) .375 (9.5) .375 (9.5) .50 (12.7) .50 (12.7) .625 (15.9) .625 (15.9) .75 (19.1) .75 (19.1) 1.00 (25.4) 1.00 (25.4) .125 (3.2) .188 (4.8) .25 (6.4) .50 (12.7) .625 (15.9) .75 (19.1) 1.00 (25.4) .218 (5.5) .250 (6.4) .375 (9.5) .375 (9.5) .437 (11.1) .50 (12.7) .625 (15.9) .875 (22.2) 1.125 (28.6) .218 (5.5) .218 (5.5) .250 (6.4) .250 (6.4) .375 (9.5) .375 (9.5) .437 (11.1) .437 (11.1) .50 (12.7) .50 (12.7) .625 (15.9) .625 (15.9) .875 (22.2) .875 (22.2) 1.125 (28.6) 1.125 (28.6) .218 (5.5) .218 (5.5) .250 (6.4) .250 (6.4) .375 (9.5) .375 (9.5) .437 (11.1) .437 (11.1) .50 (12.7) .50 (12.7) .625 (15.9) .625 (15.9) .875 (22.2) .875 (22.2) 1.125 (28.6) 1.125 (28.6) .218 (5.5) .250 (6.4) .375 (9.5) .50 (12.7) .625 (15.9) .875 (22.2) 1.125 (28.6) .03 (.76) .035 (.89) .04 (1.02) .04 (1.02) .055 (1.4) .06 (1.5) .062 (1.57) .065 (1.65) .07 (1.78) .03 (.76) .03 (.76) .032 (.81) .032 (.81) .04 (1.02) .04 (1.02) .055 (1.4) .055 (1.4) .06 (1.5) .06 (1.5) .062 (1.57) .062 (1.57) .065 (1.65) .065 (1.65) .07 (1.78) .07 (1.78) .015 (.38) .015 (.38) .020 (.51) .020 (.51) .023 (.58) .023 (.58) .03 (.76) .03 (.76) .032 (.81) .032 (.81) .035 (.89) .03 (.89) .04 (1.02) .04 (1.02) .045 (1.1) .045 (1.1) .02 (.5) .03 (.76) .03 (.76) .03 (.76) .03 (.76) .03 (.76) .04 (1.02) .064 (1.6) - .50 (12.7) .125 (3.2) - 1.00 (25.4) .188 (4.8) - 2.00 (50.8) .188 (4.8) - 2.00 (50.8) .316 (7.9) - 3.00 (76.2) .375 (9.5) - 4.00 (101.6) .50 (12.7) - 4.50 (114.3) .625 (15.9) - 5.00 (127.0) .875 (22.2) - 6.00 (152.4) .064 (1.6) - .50 (12.7) .064 (1.6) - .50 (12.7) .125 (3.2) - 1.00 (25.4) .125 (3.2) - 1.00 (25.4) .188 (4.8) - 2.00 (50.8) .188 (4.8) - 2.00 (50.8) .316 (7.9) - 3.00 (76.2) .316 (7.9) - 3.00 (76.2) .375 (9.5) - 4.00 (101.6) .375 (9.5) - 4.00 (101.6) .50 (12.7) - 4.50 (114.3) .50 (12.7) - 4.50 (114.3) .625 (15.9) - 5.00 (127.0) .625 (15.9) - 5.00 (127.0) .875 (22.2) - 6.00 (152.4) .875 (22.2) - 6.00 (152.4) .064 (1.6) - .50 (12.7) .064 (1.6) - .50 (12.7) .125 (3.2) - 1.00 (25.4) .125 (3.2) - 1.00 (25.4) .188 (4.8) - 2.00 (50.8) .188 (4.8) - 2.00 (50.8) .316 (7.9) - 3.00 (76.2) .316 (7.9) - 3.00 (76.2) .375 (9.5) - 4.00 (101.6) .375 (9.5) - 4.00 (101.6) .50 (12.7) - 4.50 (114.3) .50 (12.7) - 4.50 (114.3) .625 (15.9) - 5.00 (127.0) .625 (15.9) - 5.00 (127.0) .875 (22.2) - 6.00 (152.4) .875 (22.2) - 6.00 (152.4) .064 (1.6) - .50 (12.7) .125 (3.2) - 1.00 (25.4) .188 (4.8) - 2.00 (50.8) .375 (9.5) - 4.00 (101.6) .50 (12.7) - 4.50 (114.3) .625 (15.9) - 5.00 (127.0) .875 (22.2) - 6.00 (152.4) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 50 (15.2) 25 (7.6) 25 (7.6) 10 (3.0) 10 (3.0) *Order in multiples of std. pkg. qty. TEFLON or equivalent fluorocarbon PTFE material is used. TEFLON is a registered trademark of E.I. DuPont de Nemours Co. Note: Custom cut-to-length sizes are available upon request. Contact PANDUIT (R) Technical Assistance 866-405-6657 for details. Most commonly used parts appear in BOLD. 167 Split Harness Wrap PAN -WRAP TM Split Harness Wrap PAN -WRAP TM Split Harness Wrap is an innovative addition to the PANDUIT (R) Abrasion Protection Line. Engineered for wire harness protection, PAN-WRAP TM bundles and protects wire, cable and hoses. The PAN -WRAP TM design provides full 360 coverage with pre-cut slots for break-outs to maximize reliability and reduce installation time. PAN -WRAP TM tools are available for easy installation. Features and Benefits * Slotted walls allow wire break-outs to speed installation * Flexible design allows maneuverability and protects wire and cables during movement * New installation tool reduces installation time and lowers installed cost * 360 abrasion protection improves product reliability Applications * Wire Harness Assemblers * Transportation Open PAN-W RAP TM Tool to enable the wire bundle to be inserted inside the tool. * Commercial Appliances * Industrial Robotics Insert wire bundle inside tool. Close tool to secure the wire bundle and prepare to insert bundle into the PAN-WRAP TM Split Harness Wrap. Insert end of tool into the end of Split Harness Wrap. Begin pulling the tool making certain that the Split Harness Wrap is feeding over the wire bundle. Hold end of Split Harness Wrap and wire bundle while continuing to pull the tool, inserting the wire bundle into the length of the Split Harness Wrap. Split Harness Wrap Part Number PW50F-T PW75F-C PW50F-T20 PW75F-C20 Size I.D. In. (mm) Maximum Bundle Diameter In. (mm) Material .50 (12.7) .75 (19.05) .50 (12.7) .75 (19.05) .55 (13.97) .80 (20.32) .55 (13.97) .80 (20.32) Polyethylene Polyethylene Polyethylene Polyethylene Color Length Ft. (M) Std. Pkg. Qty.* Natural Natural Black Black 200 (61.05) 100 (30.48) 200 (61.05) 100 (30.48) 1 1 1 1 Tool Part Number Material Color Size Std. Pkg. Qty.* PWT50 PWT75 ABS ABS White White .50" .75" 1 1 168 Most commonly used parts appear in BOLD. *Order in multiples of std. pkg. qty. Grommet Edging Features: Suggested Applications: * Nylon grommet edging strips conform to the Military Standard MS21266 * Slotted or solid wall construction * Available with pressure sensitive adhesive * No liner to remove from adhesive * Use the solid wall product on straight edges * Use to prevent abrasion against the sharp edges of panel walls and knockouts The Functional Part Number System Makes Ordering Easy Grommet Edging Part Number Description Example: Part Description Grommet Edging Strips = GE Slotted Grommet Edging = GEE Max. Panel Thickness 36 = .036" thickness 62 = .062" thickness 99 = .099" thickness 144 = .144" thickness 189 = .189" thickness GEE 36 F -A- C 0 Material F = Polyethylene N = Nylon 6.6 FR = Flame Retardant Polyethylene Adhesive A = Adhesive Lined Leave Blank = Non-Adhesive Package Size Q = 25' L = 50' C = 100' Color Suffix 0 = Weather Resistant Black Leave Blank = Natural Solid Grommet Edging = GES Most commonly used parts appear in BOLD. 169 Grommet Edging Protects wires and cables from sharp edges Choose from five materials: Nylon 6.6 * Self extinguishing * For indoor use up to 149F (65C) * Available with slotted wall only` Polyethylene * General purpose material for indoor use up to 122F (50C) * Style GEE and GES provided in .030" (0.8mm) thick material, makes them highly flexible * Available with slotted or solid wall construction Weather Resistant Polyethylene * For outdoor use up to 122F (50C) * Excellent resistance to ultra-violet light Flame Retardant Polyethylene * Will not support a flame * Available with slotted or solid wall construction Adhesive Lined Polyethylene * Base is lined with a pressure sensitive adhesive * Available in natural and weather resistant * Adhesive ensures that the product will stay where it is installed Adhesive Lined 170 Most commonly used parts appear in BOLD. Grommet Edging Dimensions --in. (mm) Part Number Material GEE36F-C GEE36F-C0 GEE62F-C GEE62F-C0 GEE99F-C GEE99F-C0 GEE144F-C GEE144F-C0 GES36F-C GES36F-C0 GES62F-C GES62F-C0 GES99F-C GES99F-C0 GES144F-C GES144F-C0 GES189F-C GES189F-C0 GEE62F-A-C GEE62F-A-C0 GEE99F-A-C GEE99F-A-C0 GEE144F-A-C GEE144F-A-C0 GES62F-A-C GES62F-A-C0 GES99F-A-C GES99F-A-C0 GES144F-A-C GES144F-A-C0 GEE36FR-C GEE62FR-C GEE99FR-C GEE144FR-C Continuous Polyethylene (Slotted Wall) Continuous Polyethylene (Solid Wall) Continuous Polyethylene With Adhesive (Slotted Wall) Continuous Polyethylene With Adhesive (Solid Wall) Flame Retardant Polyethylene (Slotted Wall) GES36FR-C Flame GES62FR-C Retardant Polyethylene GES99FR-C GES144FR-C (Solid Wall) GEE47N-C Continuous GEE55N-C Nylon 6.6 GEE71N-C (Slotted GEE98N-C Wall) GEE134N-C Std. Pkg. Qty.* Polyethylene Color Panel Thickness in. (mm) A B Ft. (m) Per Roll Natural Black Natural Black Natural Black Natural Black Natural Black Natural Black Natural Black Natural Black Natural Black Natural Black Natural Black Natural Black Natural Black Natural Black Natural Black Natural Natural Natural Natural .026 (.7) - .036 (.9) .026 (.7) - .036 (.9) .036 (.9) - .062 (1.6) .036 (.9) - .062 (1.6) .062 (1.6) - .099 (2.5) .062 (1.6) - .099 (2.5) .099 (2.5) - .144 (3.7) .099 (2.5) - .144 (3.7) .026 (.7) - .036 (.9) .026 (.7) - .036 (.9) .036 (.9) - .062 (1.6) .036 (.9) - .062 (1.6) .062 (1.6) - .099 (2.5) .062 (1.6) - .099 (2.5) .099 (2.5) - .144 (3.7) .099 (2.5) - .144 (3.7) .144 (3.7) - .189 (4.8) .144 (3.7) - .189 (4.8) 036 (.9) - .062 (1.6) .036 (.9) - .062 (1.6) .062 (1.6) - .099 (2.5) .062 (1.6) - .099 (2.5) .099 (2.5) - .144 (3.7) .099 (2.5) - .144 (3.7) 036 (.9) - .062 (1.6) .036 (.9) - .062 (1.6) .062 (1.6) - .099 (2.5) .062 (1.6) - .099 (2.5) .099 (2.5) - .144 (3.7) .099 (2.5) - .144 (3.7) .026 (.7) - .036 (.9) .036 (.9) - .062 (1.6) .062 (1.6) - .099 (2.5) .099 (2.5) - .144 (3.7) .106 (2.7) .106 (2.7) .131 (3.3) .131 (3.3) .169 (4.3) .169 (4.3) .213 (5.4) .213 (5.4) .106 (2.7) .106 (2.7) .131 (3.3) .131 (3.3) .169 (4.3) .169 (4.3) .213 (5.4) .213 (5.4) .297 (7.6) .297 (7.6) .131 (3.3) .131 (3.3) .169 (4.3) .169 (4.3) .213 (5.4) .213 (5.4) .131 (3.3) .131 (3.3) .169 (4.3) .169 (4.3) .213 (5.4) .213 (5.4) .106 (2.7) .131 (3.3) .169 (4.3) .213 (5.4) .117 (3.0) .117 (3.0) .160 (4.1) .160 (4.1) .186 (4.7) .186 (4.7) .222 (5.6) .222 (5.6) .117 (3.0) .117 (3.0) .160 (4.1) .160 (4.1) .186 (4.7) .186 (4.7) .222 (5.6) .222 (5.6) .301 (7.7) .301 (7.7) .160 (4.1) .160 (4.1) .186 (4.7) .186 (4.7) .222 (5.6) .222 (5.6) .160 (4.1) .160 (4.1) .186 (4.7) .186 (4.7) .222 (5.6) .222 (5.6) .117 (3.0) .160 (4.1) .155 (3.9) .232 (5.9) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 1 Roll B 1 Roll A 1 Roll Style GEE 1 Roll Slotted Wall 1 Roll Continuous 1 Roll (100') Rolls 1 Roll 1 Roll Polyethylene 1 Roll 1 Roll 1 Roll 1 Roll B 1 Roll A 1 Roll Style GES 1 Roll Solid Wall 1 Roll Continuous 1 Roll (100') Rolls 1 Roll 1 Roll Adhesive Lined 1 Roll Polyethylene 1 Roll 1 Roll 1 Roll 1 Roll B 1 Roll A 1 Roll Style GEE-A 1 Roll Slotted Wall 1 Roll Continuous 1 Roll (100') Rolls 1 Roll 1 Roll 1 Roll Adhesive Lined 1 Roll Polyethylene 1 Roll Natural Natural Natural Natural Natural Natural Natural Natural Natural .026 (.7) - .036 (.9) .036 (.9) - .062 (1.6) .062 (1.6) - .099 (2.5) .099 (2.5) - .144 (3.7) .039 (1.0) - .055 (1.4) .047 (1.2) - .063 (1.6) .063 (1.6) - .079 (2.0) .091 (2.3) - .106 (2.7) .126 (3.2) - .142 (3.6) .106 (2.7) .131 (3.3) .169 (4.3) .213 (5.4) .130 (3.3) .133 (3.4) .150 (3.8) .180 (4.6) .210 (5.3) .117 (3.0) .160 (4.1) .155 (3.9) .232 (5.9) .140 (3.5) .140 (3.5) .140 (3.5) .140 (3.5) .140 (3.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll B A Style GES-A Solid Wall Continuous (100') Rolls Nylon 6.6 *Order the number of reels required in multiples of standard package quantities. B A Dimensions --in. (mm) Part Number Material GE52-C GE52-C69 GE85-C GE85-C69 GE128-C GE128-C69 GE192-L GE192-L69 GE255-L GE318-L GE380-Q GE510-Q Military Standard MS21266 12.75 (323.85mm) Nylon 6.6 Strips -69 designates Flame Retardant) Color Panel Thickness in. (mm) B Pieces Per Pkg. Std. Pkg. Qty.* .155 (3.9) .155 (3.9) .155 (3.9) .155 (3.9) .155 (3.9) .155 (3.9) .230 (5.8) .230 (5.8) .240 (6.1) .255 (6.5) .255 (6.5) .255 (6.5) 100 100 100 100 100 100 50 50 50 50 25 25 Strips Strips Strips Strips Strips Strips Strips Strips Strips Strips Strips Strips A Natural .015 (.4) - .052 (1.3) .150 (3.8) Natural .015 (.4) - .052 (1.3) .150 (3.8) Natural .052 (1.3) - .085 (2.2) .175 (4.5) Natural .05 (1.3) - .085 (2.2) .175 (4.5) Natural .085 (2.2) - .128 (3.3) .220 (5.6) Natural .085 (2.2) - .128 (3.3) .220 (5.6) Natural .128 (3.3) - .192 (4.9) .325 (8.3) Natural .128 (3.3) - .192 (4.9) .325 (8.3) Natural .192 (4.9) - .255 (6.5) .385 (9.8) Natural .255 (6.5) - .318 (8.1) .455 (11.3) Natural .318 (8.1) - .380 (9.7) .515 (13.1) Natural .380 (9.7) - .510 (13.0) .640 (16.3) *Order the number of pieces required in multiples of standard package quantities. This material is not listed under military standard MS21266. Grommet edging is to be used for odd shaped holes in addition to circular panel holes. Circular hole installation cut lengths can be found by: cut lengths = (dia. of hole) x 3.14. Continuous (100') Rolls Style GEE Slotted Wall Nylon 6.6 B A Style GE Slotted Wall 12 3/4" strips Most commonly used parts appear in BOLD. 171 Corrugated Loom Tubing * PANDUIT (R) Corrugated Loom Tubing is offered for applications where spiral wrap or braided expandable sleeving may be difficult to install or where they do not offer the amount of protection required * Available in Heat Stabilized Nylon or Polyethylene, this product features a lengthwise slit which makes it easy to install onto a bundle of wires or a pre-assembled harness assembly Features and Benefits * Protects and reduces the risk of damage to wiring * Crush, impact and abrasion resistant * Slit wall design for ease of installation * Available in easy to handle 100' lengths * Available in black, orange and yellow polyethylene and black heat stabilized nylon * Secure with push type cable ties, adhesive or push type mounts Suggested Applications * Bundle wires in control panels * Contain and organize loose and bundled wiring harnesses * Route wires in automotive, truck, trailer, bus, conversion van, emergency service and recreational vehicle applications * Protect wires in off road/mobile equipment * Use in mining equipment * Marine applications for protecting wires on boats and ships Wiring Accessories for Corrugated Loom Tubing * Tie Harness Mounts have a specially designed location tab on the mount that aligns with grooves in corrugated loom tubing to ensure proper mount location during assembly 172 Most commonly used parts appear in BOLD. Corrugated Loom Tubing The Functional Part Number System Makes Ordering Easy Corrugated Loom Tubing Part Number Description Example: CLT Part Description Corrugated Loom Tubing CLT= Slit Wall CLTS= Solid Wall Bundle Diameter 25 = 1/4" 35 = 5/16" 38 = 3/8" 50 = 1/2" 62 = 5/8" 75 = 3/4" 100 = 1" 125 = 1 1/4" 150 = 1 1/2" 188 = 1 7/8" Material N = Heat Stabilized Nylon F = Polyethylene Part Number Slit CLT25F-C20 CLT35F-C20 CLT38F-C20 CLT50F-C20 CLT62F-C20 CLT75F-C20 CLT100F-C20 CLT125F-L20 CLT150F-X20 CLT150F-T20 CLT150F-D20 CLT188F-X20 CLT188F-C20 CLT188F-6C20 CLT25F-C3 CLT35F-C3 CLT38F-C3 CLT50F-C3 CLT62F-C3 CLT75F-C3 CLT100F-C3 CLT125F-L3 CLT150F-X3 CLT150F-D3 CLT188F-X3 CLT188F-C3 CLT150F-X4 CLT150F-D4 CLT188F-X4 CLT188F-C4 CLT25N-C630 CLT35N-C630 CLT38N-C630 CLT50N-C630 CLT62N-C630 CLT75N-C630 CLT100N-C630 CLT125N-L630 CLT150N-D630 CLT188N-6C630 Solid CLTS25F-C CLTS35F-C CLTS38F-C CLTS50F-C CLTS62F-C CLTS75F-C CLTS100F-C CLTS125F-L ** ** CLTS150F-D ** ** ** CLTS25F-C3 CLTS35F-C3 CLTS38F-C3 CLTS50F-C3 CLTS62F-C3 CLTS75F-C3 CLTS100F-C3 CLTS125F-L3 ** CLTS150F-D3 ** ** ** ** ** ** CLTS25N-C CLTS35N-C CLTS38N-C CLTS50N-C CLTS62N-C CLTS75N-C CLTS100N-C CLTS125N-L ** ** 100 N -C 630 Material Color Polyethylene Black Polyethylene Orange Polyethylene Yellow Heat Stabilized Black Nylon 6 Black Package Size X = 10' L = 50' C = 100' T = 200' D = 500' 6C = 600' Color Suffix 630 = Heat Stabilized Black Nylon 6 20 = Black Polyethylene 3= Orange 4= Yellow Inside Diameter in. (mm) Outside Diameter in. (mm) Length Ft. (m) .265 (6.7) .350 (8.9) .414 (10.5) .505 (12.8) .665 (16.9) .760 (19.3) .915 (23.2) 1.290 (32.8) 1.550 (39.1) 1.550 (39.1) 1.550 (39.1) 1.881 (47.8) 1.881 (47.8) 1.881 (47.8) .265 (6.7) .350 (8.9) .414 (10.5) .505 (12.8) .665 (16.9) .760 (19.3) .915 (23.2) 1.290 (32.8) 1.550 (39.1) 1.550 (39.1) 1.881 (47.8) 1.881 (47.8) 1.550 (39.1) 1.550 (39.1) 1.881 (47.8) 1.881 (47.8) .265 (6.7) .350 (8.9) .414 (10.5) .505 (12.8) .665 (16.9) .760 (19.3) .915 (23.2) 1.290 (32.8) 1.550 (39.1) 1.881 (47.8) .390 (9.9) .500 (12.7) .556 (14.1) .670 (17.0) .830 (21.1) .935 (23.7) 1.090 (27.7) 1.500 (38.1) 1.860 (47.2) 1.860 (47.2) 1.860 (47.2) 2.169 (55.1) 2.169 (55.1) 2.169 (55.1) .390 (9.9) .500 (12.7) .556 (14.1) .670 (17.0) .830 (21.1) .935 (23.7) 1.090 (27.7) 1.500 (38.1) 1.860 (47.2) 1.860 (47.2) 2.169 (55.1) 2.169 (55.1) 1.860 (47.2) 1.860 (47.2) 2.169 (55.1) 2.169 (55.1) .390 (9.9) .500 (12.7) .556 (14.1) .670 (17.0) .830 (21.1) .935 (23.7) 1.090 (27.7) 1.500 (38.1) 1.860 (47.2) 2.169 (55.1) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 50 (15.2) 10 (3.0) 200 (61.0) 500 (152.4) 10 (3.0) 100 (30.5) 600 (182.9) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 50 (15.2) 10 (3.0) 500 (152.4) 10 (3.0) 100 (30.5) 10 (3.0) 500 (152.4) 10 (3.0) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 100 (30.5) 50 (15.2) 500 (152.4) 600 (182.9) *Order number of rolls required. **Contact PANDUIT (R) Technical Assistance 866-405-6657 for additional sizes, materials, colors, and bulk packaging. NOTE: Custom cut-to-length sizes are available upon request. Contact PANDUIT (R) Technical Assistance 866-405-6657 for details. Most commonly used parts appear in BOLD. Std. Pkg. Qty.* 1 Roll 1 Roll 1 Roll 1 Roll 173 Corrugated Loom Tubing Fittings Features: Benefits: * * * * * * Reduces production time Improves system appearance Reduces operator fatigue Secures fittings firmly in place Protects wires Provides easy selection of fittings for application needs Fast assembly . . . . . . . . . . . . . . . . . Virtually eliminates taping . . . . . . . . Easy to assemble . . . . . . . . . . . . . . Locking latch design . . . . . . . . . . . . Durable polyethylene shell. . . . . . . . Works with most popular sizes . . . . of Corrugated Loom Tubing C D B A Dimensions in. (mm) Part Number CF382538F-Q CF502550F-Q CF503850F-Q A .38 (9.53) .50 (12.70) CF752575F-Q CF753875F-Q 174 .75 (19.05) B .25 (6.35) .38 (9.53) .25 (6.35) .38 (9.53) Packaging* C .38 (9.53) D 2.06 (52.32) .50 (12.70) 2.30 (58.42) .75 (19.05) 3.06 (77.72) Material Color Std. Pkg Qty. Polyethylene Black 25 Std. Ctn. Qty. 100 *Order the number of pieces required in multiplies of package quantities. Most commonly used parts appear in BOLD. Braided Expandable Sleeving Braided Expandable Sleeving -- Polyethylene Terephthalate -- PET * Provides continuous abrasion resistance for wires, cables and tubing * Lightweight, durable protection * Highly flexible open weave will not trap heat or humidity * Rated for use up to 257F (125C) * Allows for use with irregular shapes * Stock colors: Black, gray and white * See page 176 for cutting tools The Functional Part Number System Makes Ordering Easy Braided Expandable Sleeving Part Number Description Example: SE 25 PFR - M R 0 Nom. I.D. Size Material 12 = 1/8" (3.2) P = Polyethylene Terephthalate (PET) 25 = 1/4" (6.4) PFR = Polyethylene Terephthalate (PET) 38 = 3/8" (9.5) Flame Retardant 50 = 1/2" (12.7) 75 = 3/4" (19.1) 125 = 1 1/ 4" (31.8) Part Description SE = Sleeving Expandable Package Size R = Reel L = 50' (15.2m) C = 100' (30.5m) T = 200' (61.0m) D = 500' (152.4m) M = 1000' (304.8m) Color Suffix 0 = Black 8 = Gray 10 = White 150 = 1 1/ 2" (38.1) 175 = 1 3/ 4" (44.5) Part Number Black Part Number Gray Part Number White SE12P-TR0 SE12P-MR0 SE25P-TR0 SE25P-MR0 SE38P-TR0 SE38P-MR0 SE50P-CR0 SE50P-DR0 SE75P-CR0 SE75P-DR0 SE125P-LR0 SE125P-TR0 SE150P-LR0 SE150P-TR0 SE175P-TR0 SE12P-TR8 SE12P-MR8 SE25P-TR8 SE25P-MR8 SE38P-TR8 SE38P-MR8 SE50P-CR8 SE50P-DR8 SE75P-CR8 SE75P-DR8 SE125P-LR8 SE125P-TR8 SE150P-LR8 SE150P-TR8 -- -- SE12P-MR10 -- SE25P-MR10 -- SE38P-MR10 -- SE50P-DR10 -- SE75P-DR10 -- SE125P-TR10 -- SE150P-TR10 -- Nominal I.D. in. Nominal Diameter Range in. (mm) 1/8 .094 to .250 (2.4) to (6.4) .125 to .375 (3.2) to (9.5) .188 to .562 (4.7) to (14.3) .250 to .750 (6.4) to (19.1) .500 to 1.25 (12.7) to (31.8) .750 to 1.50 (19.1) to (38.1) 1.00 to 2.25 (25.4) to (57.2) 1.25 to 2.75 (31.8) to (69.8) 1/4 3/8 1/2 3/4 1 1/4 1 1/2 1 3/4 Std. Pkg. Qty.* Feet (m) Std. Ctn. Qty. 200 (61.0) 1000 (304.8) 200 (61.0) 1000 (304.8) 200 (61.0) 1000 (304.8) 100 (30.5) 500 (152.4) 100 (30.5) 500 (152.4) 50 (15.2) 200 (61.0) 50 (15.2) 200 (61.0) 200 (61.0) 4 Reels 2 Reels 4 Reels 2 Reels 4 Reels 2 Reels 4 Reels 2 Reels 4 Reels 2 Reels 4 Reels 2 Reels 4 Reels 2 Reels 2 Reels *Order number of reels required. Most commonly used parts appear in BOLD. 175 Flame Retardant Braided Expandable Sleeving Braided Expandable Sleeving -- Flame Retardant Polyethylene Terephthalate -- PET * Provides continuous abrasion resistance for wires, cables and tubing * Lightweight, durable protection * Highly flexible open weave will not trap heat or humidity * Rated for use up to 257F (125C) * Allows for use with irregular shapes * Self extinguishing, meets UL VW-1 * Stock colors: Black or gray with white tracer, or in white with black tracer to identify flame retardant material * See bottom of this page for cutting tools Flame Retardant Part Number Black Part Number Gray Part Number White SE12PFR-TR0 SE12PFR-MR0 SE25PFR-TR0 SE25PFR-MR0 SE38PFR-TR0 SE38PFR-MR0 SE50PFR-CR0 SE50PFR-DR0 SE75PFR-CR0 SE75PFR-DR0 SE125PFR-LR0 SE125PFR-TR0 SE150PFR-LR0 SE150PFR-TR0 SE175PFR-TR0 SE12PFR-TR8 SE12PFR-MR8 SE25PFR-TR8 SE25PFR-MR8 SE38PFR-TR8 SE38PFR-MR8 SE50PFR-CR8 SE50PFR-DR8 SE75PFR-CR8 SE75PFR-DR8 SE125PFR-LR8 SE125PFR-TR8 SE150PFR-LR8 SE150PFR-TR8 -- -- SE12PFR-MR10 -- SE25PFR-MR10 -- SE38PFR-MR10 -- SE50PFR-DR10 -- SE75PFR-DR10 -- SE125PFR-TR10 -- SE150PFR-TR10 -- Nominal I.D. in. (mm) Nominal Diameter Range in. (mm) 1/8 .094 to .250 (2.4) to (6.4) .125 to .375 (3.2) to (9.5) .188 to .625 (4.7) to (15.9) .250 to .750 (6.4) to (19.1) .500 to 1.25 (12.7) to (31.8) .750 to 1.50 (19.1) to (38.1) 1.00 to 2.25 (25.4) to (57.2) 1.25 to 2.75 (31.8) to (69.8) 1/4 3/8 1/2 3/4 1 1/4 1 1/2 1 3/4 Std. Pkg. Qty. Feet (m) Std. Ctn. Qty. 200 (61.0) 1000 (304.8) 200 (61.0) 1000 (304.8) 200 (61.0) 1000 (304.8) 100 (30.5) 500 (152.4) 100 (30.5) 500 (152.4) 50 (15.2) 200 (61.0) 50 (15.2) 200 (61.0) 200 (61.0) 4 Reels 2 Reels 4 Reels 2 Reels 4 Reels 2 Reels 4 Reels 2 Reels 4 Reels 2 Reels 4 Reels 2 Reels 4 Reels 2 Reels 2 Reels *Order number of reels required. Bench Mount Cutter/ End Sealer Tooling Head (HKBS) Sleeving Cutter/End Sealer Blade -- Used with popular soldering guns to cut and seal sleeving. Part Number HKBS Description For dual straight shank soldering guns with .500" spacing Typical Guns: WELLER straight shank Model 8200; WEN Model 199 or 100 *Order number of blades required. 176 Most commonly used parts appear in BOLD. Available Directly from Manufacturer Std. Pkg. Qty* 1 Pearson Industries P.O. Box 36 Prattville, AL 36067 (334) 365-5416 Flammability Tests and Classifications Abrasion Protection Products Flammability Tests and Classifications * A number of test procedures have been developed which can be used for the evaluation and comparison of various materials to support combustion * Review the following classifications to find which category is designed to suit your abrasion and protection applications UL94 VERTICAL BURNING TEST Test samples of material, with dimension 125 5mm by 13.0 5mm and provided in the minimum and maximum thickness of the intended end use product, are tested in an unconditioned (as manufactured) state and in a conditioned state (7 days at 168F, 75C). The test requires the placement of a precisely controlled flame under a vertically supported specimen for a 10 second period. The flame is removed and the duration of flaming is recorded. If the flame extinguishes, the specimen is immediately subjected to a second 10 second ignition period. Duration of flaming is again recorded. A piece of 100% cotton is placed under the specimen. Also observed and documented is if the sample drips flaming particles that ignite the cotton indicator below. Materials Classification Criteria Conditions V-0 V-1 V-2 Afterflame time for each individual specimen t1 or t2 10s 30s 30s Total afterflame time for any condition set (t1 plus t2 for the 5 specimens) Afterflame plus afterglow time for each individual specimen after the second flame application (t2+t 3) 50s 250s 250s 30s 60s 60s No No No No No Yes Afterflame or afterglow of any specimen up to the holding clamp Cotton indicator ignited by flaming particles or drops t1 Afterflame time after first flame application t2 Afterflame time after flame application t3 Afterglow time after second flame application MATERIALS CLASSIFIED UL-94 HB * Specimens shall have a maximum burn rate of <1.5"/min over 3" of thickness of 0.120" to 0.5" * Specimens shall have a maximum burn rate of <3.0"/min over 3" for a thickness less than 0.120" UL224 VERTICAL WIRE FLAME TEST Samples of fully recovered tubing are placed over a length of fine spring steel music wire. The test requires the precise placement of a controlled flame that contacts the heat shrink tubing. The flame is applied in five fifteen second intervals with a time period between applications. If the flame extinguishes immediately after the first flame removal, subsequent flame applications are made to the tubing. Duration of specimen flaming is noted. A piece of surgical cotton is placed under the specimen. If a flaming or glowing piece of tubing drips and ignites the cotton, this is also noted. MATERIALS CLASSIFIED AS VW-1 SHALL: * Not flame or glow longer than 60 seconds following any of the five applications of the flame * Not ignite or damage more than 25% of kraft paper flag that is placed around the top of the tubing * Not have any specimens which drip flaming particles and ignite the surgical cotton located 9 1/2" below the test specimen. Most commonly used parts appear in BOLD. 177 Abrasion Protection Materials Technical Data 22 mg .91.93 1400 (D638) .01% HB 239F (115C) 20 mg .931.09 2000 (D638) .03% V-2 239F (115C) 27 mg 1.001.30 1400 (D638) .02% UL94 V-0 270F (132C) 22 mg 1.15 1,500 (D638) .02% UL94 V-2 505F (263C) 7 mg 1.131.15 12,400 (D638) UL94 V-2 505F (263C) 7 mg 1.131.15 UL94 V-0 648F (342C) 7 mg UL94 HB 500F (260C) Flame Ret. Polyethylene -94F UL Terephthalate (PET) (-70C) 224 This material is a self-extinguishing to VW-1 thermoplastic polyester that can be used 257F indoors. It is also rated for use up to (125C) 257F and will tolerate short-term exposure up to 446F. It is provided with tracers to identify the flame retardant material. 608F (320C) Alkalies Resistant Resistant Some except to Discoloration oxidizing acids Resistant Resistant No except to Discoloration oxidizing acids Resistant below 140F (60C) except to chlorinated solvents Resistant except to halogenated hydrocarbons Resistant Resistant Some except to Discoloration oxidizing acids Resistant Resistant 1.2% Resistant except to halogenated hydrocarbons Resistant Not Resistant recomNo mended Discoloration 12,000 (D638) 1.2% Resistant except to halogenated hydrocarbons Resistant Not Resistant recomNo mended Discoloration 2.132.22 3000 (D876) .01% Resistant Resistant Resistant Resistant No Discoloration -- 1.31 100,00 0 (D876) .08% Resistant to some solvents Resistant to most weak bases Resistant Resistant No Discoloration -- 1.39 100,00 0 (D876) .08% Resistant to some solvents Resistant to most weak bases Resistant Resistant No Discoloration Most commonly used parts appear in BOLD. Acids Organic Solvents Resistant below 140F (60C) except to chlorinated solvents Resistant below 140F (60C) except to chlorinated solvents NOTE: Typical operating temperature ranges are extended based on end use application and specific environmental tests. TEFLON or equivalent fluorocarbon PTFE is used. Teflon is the registered trademark of E. I. DuPont de Nemours Co. 178 Petro-Chemicals Water Absorption (Max. 24 hrs.) 239F (115C) Natural Polyethylene -40F Lowest cost material for indoor use up to (-40C) 122F. Natural is available in all sizes. to Colors are available in 1/4" and 1/2". 122F (50C) Weather Resistant Polyethylene -40F This material has the same (-40C) properties as natural polyethylene, and to also has additives which allow it to resist 122F the effects of ultraviolet light and acid (50C) rain in an outdoor environment. This product is available in black only. Fire Resistant Polyethylene -40F UL94-V2 Rating (-40C) This material is self extinguishing and to passes the UL94 flame 122F retardant test with a V2 rating. (50C) Flame Retardant Polyethylene -40F UL94-V0 Rating (-40C) This material is self extinguishing and to passes the UL94 flame 194F retardant test with a V0 rating. (90C) Nylon 6.6 -40F Nylon is strong, durable, self(-40C) extinguishing material for indoor use up to to 149F. It offers a combination of 149F lightweight, wide temperature range, (65C) and high abrasion resistance. This material is suitable for applications where heavy vibration or stress exists on the wiring or tubing. Weather Resistant Nylon -40F This material has the same (-40C) properties as natural Nylon and also has to additives which allow it to resist the 149F effects of ultraviolet light in an outdoor (65C) environment. This product is available in black only. TEFLON -400F This material is a non-flammable, (-240C) fluorocarbon resin material. to Suitable for use in any application 500F (including nuclear containment). It is (260C) rated up to 356F. Color: Opaque to Translucent Polyethylene Terephthalate (PET) -94F This material is a thermoplastic polyester (-70C) material designed for indoor applications. to It is rated for use up to 257F and will 257F tolerate short-term exposure up to 446F. (125C) Colors: Black, White and Gray Abrasion Resistance (Lower number is better) HB UL Temperature Index Minimum Tensile @ 23C (psi) Chemical Resistance Specific Gravity (D792) Physical Properties Melting Temperature Ratings and Approvals Flammability (UL94) BRAIDED EXPANDABLE SLEEVING SPIRAL WRAP Abrasion Protection Materials Technical Data Resistant Some Discoloration Abrasion Protection Materials Technical Data Water Absorption (Max. 24 hrs.) Organic Solvents Alkalies Acids -- .926.940 1500 (D638) -- Resistant except to halogenated hydrocarbons Resistant Resistant Resistant No Discoloration Nylon 6 Nylon is a strong, impact modified, heat stabilized, durable high abrasion resistant material. -40F (- UL94 40C) to HB 230F (110C) 410F (211C) -- 1.061.16 8000 (D638) 1.3% Resistant except to halogenated hydrocarbons Resistant Not recommended Resistant No Discoloration PVC Non-Shrink Tubing This material provides insulation and protection for continuous use at temperatures -4F (-20C) to 221F(105C). -4F UL (-20C) 224 to VW-1 221F (105C) -- -- 1.35 2500 (D876) -- Resistant except to aromatic hydrocarbons, ketones and esters Resistant Resistant Resistant No Discoloration HB 239F (115C) 22 mg .91.93 1400 (D638) .01% Resistant Resistant Some except to Discoloration oxidizing acids HB 239F (115C) 20 mg .931.09 2000 (D638) .03% Resistant below 140F (60C) except to chlorinated solvents Resistant below 140F (60C) except to chlorinated solvents Resistant Resistant No except to Discoloration oxidizing acids V-0 270F (132C) 22 mg 1.38 1200 .02% Resistant Resistant Some except to Discoloration oxidizing acids V-2 491F (255C) 7 mg 1.031.15 12,400 (D638) 1.5% Resistant below 140F (60C) except to chlorinated solvents Resistant except to phenols and formic acid Resistant Resistant No to most Discoloration weak acids -40F (-40C) to 122F (50C) Weather Resistant Polyethylene -40F This material has the same (-40C) properties as natural polyethylene, and to also has additives which allow it to 122F resist the effects of ultraviolet light and (50C) acid rain in an outdoor environment. This product is available in black only. Flame Retardant Polyethylene -40F UL94-V0 Rating (-40C) This material is self extinguishing and to passes the UL94 flame 140F retardant test with a V0 rating (60C) Nylon -40F Nylon is strong, durable, self(-40C) extinguishing material for indoor use up to to 149F. It offers a combination of 149F lightweight, wide temperature range, (65C) and high abrasion resistance. This material is suitable for applications where heavy vibration or stress exists on the wiring or tubing. Petro-Chemicals Minimum Tensile @ 23C (psi) -- Flammability (UL94) -40F (- UL94 40C) to HB 122F (50C) UL Temperature Index Specific Gravity (D792) Chemical Resistance Abrasion Resistance (Lower number is better) Physical Properties Black Polyethylene Lowest cost material is for use up to 122F. Other colors may be available. Natural Polyethylene Lowest cost material for indoor use up to 122F. Natural is available in all sizes. GROMMET EDGING Ratings and Approvals Melting Temperature PVC TUBING CORRUGATED LOOM TUBING Abrasion Protection Materials Technical Data NOTE: Typical operating temperature ranges are extended based on end use application and specific environmental tests. Most commonly used parts appear in BOLD. 179 Abrasion Protection Products Technical Data The approximate required length of spiral wrap based on the bundle diameter can be determined by using the graphs below; they show length required (in feet) per foot of bundle: 180 Most commonly used parts appear in BOLD. Abrasion Protection Bulk Packaging Bulk Package Part Numbers The following is an alpha-numeric cross reference of Standard Package Wiring Abrasion Protection parts with the corresponding Bulk Package part numbers: Standard Part No. Bulk Part No. C CLT25N-C630 CLT35F-2C0 CLT38F-C20 CLT38N-C630 CLT50F-C20 CLT50N-C630 CLT62F-C20 CLT62N-C630 CLT75F-C20 CLT75N-C630 CLT100F-C20 CLT100N-C630 CLT125F-L20 CLT125N-L630 CLT25N-10M630 CLT35F-7M20 CLT38F-5M20 CLT38N-5M630 CLT50F-4M20 CLT50N-4M630 CLT62F-2.5M20 CLT62N-2.5M630 CLT75F-2M20 CLT75N-2M630 CLT100F-125M20 CLT100N-125M630 CLT125F-.75M20 CLT125N-.75M630 T T12F-C T12N-C T19N-C T25F-C T25F-C0 T25FR-C T25FR-C20 T25N-C T25N-C0 T25R-C T25R-C20 T12F-D T12N-D T19N-M T25F-M T25F-M0 T25FR-M T25FR-M20 T25N-M T25N-M0 T25R-M T25R-M20 Standard Part No. T38F-C T38F-C0 T38FR-C T38N-C T38R-C T50F-C T50F-C0 T50F-C4 T50FR-C T50N-C T50N-C0. T50R-C T62F-C T62F-C0 T75F-C T75F-C0 T75FR-C T75N-C Bulk Part No. T38F-TL T38F-TL0 T38FR-TL T38N-TL T38R-TL T50F-TL T50F-TL0 T50F-TL4 T50FR-TL T50N-TL T50N-TL0 T50R-TL T62F-TL T62F-TL0 T75F-T T75F-T0 T75FR-T T75N-T Most commonly used parts appear in BOLD. 181 Complementary Wiring Products Designed and manufactured for fast assembly, long, reliable performance... PAN-TERM (R) Terminals, Disconnects and Splices * Funnel entry available on vinyl and nylon insulated terminals and disconnects * Made of electrolytically refined copper to provide optimum combination of crimp forming properties and low resistance, high conductivity terminations * Offered in various types including rings, forks, locking forks and short locking forks * Available sizes from 26 to 2 AWG and stud diameters from #2 to 1/2" * Disconnects are available in many styles including fully insulated. Splices and wire joints provide permanent, reliable connections * Wide assortment of manual, controlled cycle, battery operated and pneumatic crimping tools which give you reliable connections at a lower installed cost Ask for PAN -TERM (R) Terminal, Disconnects and Splices/ REEL SM ART TM Termination Catalog -- SA-TM09CB01A REEL SMART TM Continuously Molded Reel-Fed Terminals, Disconnects and Splices "Reel" productivity assures high volume production at significant savings... * ONE TECHNOLOGY, one solution for continuously molded Terminals, Butt Splices and Disconnects, including Fully Insulated Right Angle Female Disconnects and Pre-Assembled Locking Disconnects * The REEL SMART TM Termination System for installing PANDUIT (R) continuously molded products provides the best solution for quality, reliable, high volume terminations * This patented system offers an array of technical enhancements designed to dramatically reduce set-up time and the amount of downtime traditionally incurred with alternate systems * Single, patented application terminates entire product line * Applicators compatible with automatic wire processing machines and other manufacturer's presses Ask for PAN-TERM (R) Terminal, Disconnects and Splices/ REEL S MART TM Termination Catalog -- SA-TM09CB01A 182 Everywhere you need us! Complementary Wiring Products Identification and Labeling Solutions PANDUIT (R) offers a complete line of industrial Identification Solutions... * Computer Printable Labels Thermal transfer, laser, ink jet and dot-matrix labels available in a wide variety of sizes and industrial materials * Printers Versatile hand-held printers for on-site labeling and desktop thermal transfer printers for medium to high volume applications * Labeling Software Labeling programs available for wire marking, component identification and safety markers and tags * Preprinted Markers Available in books, cards, tape, slip-on and clip-on formats for fast, convenient identification of wires, cables and other industrial applications * Lockout/Tagout and Safety Lockout devices, training materials, tags and safety markers for OSHA safety standard compliance Ask for Identification Solutions Catalog SA101N315C-ID Network Connectivity Systems The unique PAN-NET (R) Network Connectivity System provides high performance solutions with FUTURE READY features for system upgradability. Lowest installed cost solutions are available for both the enterprise and service provider markets... * Breadth of Product Offering PANDUIT (R) supplies copper and fiber optic connectivity for reliable data, video and voice transmissions, end-to-end cable management for maximum protection and system integrity as well as standards compliance pathway and outlet products for maximum performance * Modular All PANDUIT (R) M INI-COM (R) copper and fiber optic modules snap in and out of all MINI-COM (R) faceplates, surface mount boxes, patch panels and multimedia adapter panels Ask for Network Connectivity Catalog SA-NC10CB01A Everywhere you need us! 183 Complementary Wiring Products PAN-WAY (R) Surface Raceway System The superior PAN-WAY (R) Surface Raceway System offers the flexibility of accepting PANDUIT (R) communication and power devices in addition to devices offered from a wide range of manufacturers. The PAN-WAY (R) system has become the preferred routing system for communication and electrical specifiers and contractors... * Advanced Designs Among other features, all PANDUIT (R) cable routing pathways are designed to maintain the proper bend radius control for high performance copper and fiber optic cabling * Aesthetics Unlike raceway systems of the past, PANDUIT (R) perimeter raceway has been designed with as much regard to form as function * Superior Termination Solutions PANDUIT (R) cable routing solutions provide you freedom of choice when selecting your data and electrical outlets. Most PANDUIT (R) raceway systems accept both NEMA Standard "Screw-On" faceplates as well as superior PANDUIT (R) Snap-On faceplates for PANDUIT (R) Connectivity * Complete Systems All PANDUIT (R) systems include a full complement of fittings and accessories that allow a complete installation of a single system or allow different PANDUIT (R) raceway systems to be used together Ask for PAN -WAY (R) Surface Raceway Catalog SA101N60B-LP PANDUCT (R) Wiring Duct -- The Original Wiring Duct PANDUIT (R) offers the most comprehensive and complete line of wiring duct for use in control panels and other OEM and MRO applications. PANDUIT (R) provides a large selection of sizes, colors, styles and materials so our customers can meet their specific application requirements... * PANDUIT (R) Exclusive rounded edges will not cut installers' hands or wiring insulation * Non-slip cover will not slip when installed on duct base * Flush cover design holds 10-12% more wires than traditional duct designs * Double scoreline saves installation time and ultimately lowers installed cost * Restricted slot design retains wire in slot for fast, easy wire installation or removal Ask for PANDUCT (R) Wiring Duct Catalog SA-WDCB05 184 Everywhere you need us! Complementary Wiring Products Power Connectors For applications in sizes #14 AWG through 1000 kcmil... * Compression Connectors Provide reliable permanently crimped connections in sizes matched for each conductor size. They are easy to install and provide a simplified means of inspection of a proper crimp * Custom Lugs PANDUIT (R) offers a wide variety of dimensional choices for #8 AWG to 250 kcmil copper compression lugs * Mechanical Connectors Economical, reusable connectors in many styles in both copper and dual rated aluminum types * Power Connector Tooling Includes hand operated controlled-cycle, mechanical and hydraulic crimping tools. Also available are the UNI-D IE TM CT-980 dieless tool and revolutionary CT-2001 battery operated crimping tool Ask for the Termination Solutions Catalog SA-TMCB02 Everywhere you need us! 185 Complementary Wiring Products PANDUIT (R) offers a variety of custom programs designed to permanently identify PANDUIT (R) products for your specific application... * Custom Marking All PANDUIT (R) stainless steel and brass products (ties, strapping, marker plates and tags) can be custom marked by one of two precise computer controlled systems (Laser or Embosser) These systems provide sharp, crisp, high quality legends. A variety of marking device accessories is also available for permanent identification of PANDUIT (R) stainless steel and brass products For more information call 866-405-6659 * Hot Stamping PANDUIT (R) nylon cable ties, marker ties and marker plates can be custom identified to meet your specific requirements, including sequential numbering and specialized company logos (see page 52). For more information call 866-405-6660 186 Everywhere you need us! Alphanumeric Part Number Index Page Number Part Number A A1C12-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110 A1C25-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110 A1C38-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110 A1C50-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110 A2C12-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110 A2C25-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110 A2C38-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110 A2C50-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . 110 ABM1M-A-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 85 ABM1M-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 85 ABM2S-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM2S-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM2S-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM2S-S6-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM3H-A-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM3H-AT-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM3H-S6-T . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM4H-A-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM4H-AT-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM4H-S6-T . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM100-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM100-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM100-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM100-S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM100-S6-C69 . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM112-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM112-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM112-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM112-S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABM112-S6-C69 . . . . . . . . . . . . . . . . . . . . . . . . 86 ABMM-A-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 ABMM-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 ABMM-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 85 ABMM-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ABMT-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 ABMT-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 132 ABMT-S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 ABMT-S6-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 132 ABMT-S6-C60 . . . . . . . . . . . . . . . . . . . . . . . . . 132 ABMT-S6-C69 . . . . . . . . . . . . . . . . . . . . . . . . . 132 ACC19-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 ACC19-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 109 ACC19-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 109 ACC19-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 109 ACC38-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 109 ACC38-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 109 ACC38-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 109 ACC38-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 109 ACC62-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 ACC62-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 109 ACC62-AT-C . . . . . . . . . . . . . . . . . . . . . . . . . . 109 ACC62-AT-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 109 ADCC31-AT-C10 . . . . . . . . . . . . . . . . . . . . . . . 112 AJC19-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 AJC25-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 AJC31-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 AJC38-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 AM2-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 AMC25-AT-C10 . . . . . . . . . . . . . . . . . . . . . . . . 112 ARC.68-A-Q . . . . . . . . . . . . . . . . . . . . . . . . . . 108 ARC.68-A-Q14 . . . . . . . . . . . . . . . . . . . . . . . . 108 ARC.68-S6-Q . . . . . . . . . . . . . . . . . . . . . . . . . 108 ARC.68-S6-Q14 . . . . . . . . . . . . . . . . . . . . . . . 108 ASMS-A-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 AST10-5-C100. . . . . . . . . . . . . . . . . . . . . . . . . 107 AST15-5-C100. . . . . . . . . . . . . . . . . . . . . . . . . 107 AST20-5-C100. . . . . . . . . . . . . . . . . . . . . . . . . 107 AST25-5-C100. . . . . . . . . . . . . . . . . . . . . . . . . 107 B B2M2S-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 B3M2S-TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 B4M2S-TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 BC1M-S4-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 BC1.5I-S8-M . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 BC2M-S4-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 BC2S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 BC2S-S10-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 31 BC3S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 BC3S-S10-D0 . . . . . . . . . . . . . . . . . . . . . . . . . . 31 BC4LH-S25-L . . . . . . . . . . . . . . . . . . . . . . . . . . 31 BC4LH-S25-L0 . . . . . . . . . . . . . . . . . . . . . . . . . 31 BC4S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 BC4S-S10-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 31 BEC38-A-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 BEC38-A-L20 . . . . . . . . . . . . . . . . . . . . . . . . . 112 BEC38-AT-L0 . . . . . . . . . . . . . . . . . . . . . . . . . 112 BEC62-A-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 BEC62-A-L20 . . . . . . . . . . . . . . . . . . . . . . . . . 112 BEC62-AT-L0 . . . . . . . . . . . . . . . . . . . . . . . . . 112 BEC75-A-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 BEC75-A-L20 . . . . . . . . . . . . . . . . . . . . . . . . . 112 BEC75-AT-L0 . . . . . . . . . . . . . . . . . . . . . . . . . 112 Page Number Part Number BECP38H25-L. . . . . . . . . . . . . . . . . . . . . . . . . 112 BECP38H25-L20. . . . . . . . . . . . . . . . . . . . . . . 112 BECP75H25-L. . . . . . . . . . . . . . . . . . . . . . . . . 112 BECP75H25-L20. . . . . . . . . . . . . . . . . . . . . . . 112 BF1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 BF2M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 BM1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 BM2M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 BM2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 BM4S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 BR.5-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 BR.75-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 BR2-1.3-A-X . . . . . . . . . . . . . . . . . . . . . . . . . . 125 BR2-1.3-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 BR2-1.5-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 BR2-4-X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 BR2-6-X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 BT1HT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 BT1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT1M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BT1M-M39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 BT1.5I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT1.5I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 BT1.5I-M39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 BT1.5M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT1.5M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BT2I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT2I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BT2LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 BT2LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 BT2M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT2M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BT2S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT2S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BT2S-M39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 BT3I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT3I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BT3LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 BT3LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 BT3S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT3S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BT3S-M39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 BT4I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT4I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BT4LH-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT4LH-L0. . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BT4LH-TL39 . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 BT4M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT4M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BT4S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT4S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BT4S-M39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 BT5LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 BT5LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 BT6LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 BT6LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 BT7LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 BT7LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 BT8LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 BT8LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 BT9LH-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 BT9LH-L0. . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 BW1.5I-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 BW2S-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 C CBLS18-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 CBLS25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 CBLS37-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 CBLS50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 CBLS62-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 CBLS75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 CBP12-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 CBP25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 CBP31-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 CBP37-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 CBP50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 CBP62-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 CBP75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 CBP87-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 CBP100-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 CBR1M-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 CBR1M-M0. . . . . . . . . . . . . . . . . . . . . . . . . . . .36 CBR1.5I-M . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 CBR1.5I-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . .36 CBR1.5M-M . . . . . . . . . . . . . . . . . . . . . . . . . . .36 CBR1.5M-M0 . . . . . . . . . . . . . . . . . . . . . . . . . .36 CBR2HS-D . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 CBR2HS-D0 . . . . . . . . . . . . . . . . . . . . . . . . . . .36 CBR2M-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 CBR2M-M0. . . . . . . . . . . . . . . . . . . . . . . . . . . .36 CBR2S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 CBR2S-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Part Number Page Number CBR3I-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CBR3I-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CBR3S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CBR3S-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CBR4I-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CBR4I-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CBR4LH-TL . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CBR4LH-TL0 . . . . . . . . . . . . . . . . . . . . . . . . . 36 CBR4S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CBR4S-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CBR6LH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CBR6LH-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CCH12-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH19-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH25-S10-C. . . . . . . . . . . . . . . . . . . . . . . . 117 CCH31-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH38-S10-C. . . . . . . . . . . . . . . . . . . . . . . . 117 CCH44-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH50-S10-C. . . . . . . . . . . . . . . . . . . . . . . . 117 CCH56-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH62-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH69-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH75-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH81-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH87-S10-C. . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH100-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH112-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH119-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH125-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH138-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117 CCH150-S10-C . . . . . . . . . . . . . . . . . . . . . . . . 117 CCMKIT1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 CCS12-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117 CCS19-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117 CCS25-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . 117 CCS25-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . 117 CCS31-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117 CCS38-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117 CCS44-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117 CCS50-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 117 CF382538F-Q . . . . . . . . . . . . . . . . . . . . . . . . . 174 CF502550F-Q . . . . . . . . . . . . . . . . . . . . . . . . . 174 CF503850F-Q . . . . . . . . . . . . . . . . . . . . . . . . . 174 CF752575F-Q . . . . . . . . . . . . . . . . . . . . . . . . . 174 CF753875F-Q . . . . . . . . . . . . . . . . . . . . . . . . . 174 CH105-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 113 CH105-S6-C14 . . . . . . . . . . . . . . . . . . . . . . . . 113 CLT25F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT25F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT25N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT35F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT35F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT35N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT38F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT38F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT38N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT50F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT50F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT50N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT62F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT62F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT62N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT75F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT75F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT75N-C630. . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT100F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT100F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT100N-C630. . . . . . . . . . . . . . . . . . . . . . . . 173 CLT125F-L3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT125F-L20 . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT125N-L630 . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT150F-D3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT150F-D4 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT150F-D20 . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT150F-T20 . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT150F-X3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT150F-X4 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT150F-X20 . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT150N-D630. . . . . . . . . . . . . . . . . . . . . . . . 173 CLT188F-6C20 . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT188F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT188F-C4 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT188F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT188F-X3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT188F-X4 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT188F-X20 . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLT188N-6C630 . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS25F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS25F-C3. . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS25N-C . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS35F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS35F-C3. . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS35N-C . . . . . . . . . . . . . . . . . . . . . . . . . . 173 Most commonly used parts appear in BOLD. 187 Alphanumeric Part Number Index Page Number Part Number CLTS38F-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173 CLTS38F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS38N-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173 CLTS50F-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173 CLTS50F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS50N-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173 CLTS62F-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173 CLTS62F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS62N-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173 CLTS75F-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173 CLTS75F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS75N-C . . . . . . . . . . . . . . . . . . . . . . . . . . .173 CLTS100F-C . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS100F-C3 . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS100N-C . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS125F-L. . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS125F-L3. . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS125N-L. . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS150F-D . . . . . . . . . . . . . . . . . . . . . . . . . . 173 CLTS150F-D3 . . . . . . . . . . . . . . . . . . . . . . . . . 173 CM4S-L2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 CM4S-L8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 CMVDR1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 CMVDR1S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 CMVDR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 CMVDR2S . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 CMVDRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 CMWB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 CMWB10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 CMW-KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 CMW-KIT10 . . . . . . . . . . . . . . . . . . . . . . . . . . .130 CMWW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 CMWW10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 CPH.75-S8-X . . . . . . . . . . . . . . . . . . . . . . . . . . 125 CPL.75-S8-X . . . . . . . . . . . . . . . . . . . . . . . . . . 125 CPM87S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 CPM122S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 CR2-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 CR4H-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 CR4H-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 CROS-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 CRS1-125-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 CRS1-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 CRS4-125-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 CRS6-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 CSCS-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 CSH-D0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 CSH-D20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 D DCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 DHC1.12x1.75-D0 . . . . . . . . . . . . . . . . . . . . . . . 48 DT4EH-L0, DT8EH-Q0, DTREH-LR0, DTHEH-Q0, DTKEH-0 . . . . . . . . . . . . . . . . . . . .33 E EMA-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 EMS-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 EMS-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 EMSK3-1-3-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 EMSK3-1-X0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 EMSK12-4-12-X0 . . . . . . . . . . . . . . . . . . . . . . . .88 ER.5-E4-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 ER1.25-E4-X . . . . . . . . . . . . . . . . . . . . . . . . . . 124 F FCBI1-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 103 FCBI1-S10-C20 . . . . . . . . . . . . . . . . . . . . . . . . 103 FCBI2-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 103 FCBI2-S10-C20 . . . . . . . . . . . . . . . . . . . . . . . . 103 FCBI3-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 103 FCBI3-S10-C20 . . . . . . . . . . . . . . . . . . . . . . . . 103 FCC5-A-C8. . . . . . . . . . . . . . . . . . . . . . . . . . . .115 FCC-A-C8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 FCH2-A-C14. . . . . . . . . . . . . . . . . . . . . . . . . . . 115 FCH2-S6-C14. . . . . . . . . . . . . . . . . . . . . . . . . . 115 FCM1-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . . 114 FCM1-S6-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 114 FCM1.2-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 114 FCM1.2-S6-C14 . . . . . . . . . . . . . . . . . . . . . . . .114 FCM2-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . . 114 FCM2-S6-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 114 FCM3.25-A-L14 . . . . . . . . . . . . . . . . . . . . . . . . 114 FCM3.25-S6-L14 . . . . . . . . . . . . . . . . . . . . . . .114 FCPI1-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 FCPI2-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 FCPI3-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 FS156-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 FSH40-X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 FSHH-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 G GCTC3S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 GCTC5S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 GCTE2S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 GCTE4S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 188 Most commonly used parts appear in BOLD. Page Number Part Number GE52-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GE52-C69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GE85-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GE85-C69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GE128-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GE128-C69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GE192-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GE192-L69. . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GE255-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GE318-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GE380-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GE510-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE36F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE36F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE36FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE47N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE55N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE62F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE62F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171 GEE62F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE62F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE62FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE71N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE98N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE99F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE99F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE99F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE99F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE99FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE134N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE144F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE144F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE144F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE144F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GEE144FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES36F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES36F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES36FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES62F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES62F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES62F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES62F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES62FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES99F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES99F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES99F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES99F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES99FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES144F-A-C . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES144F-A-C0 . . . . . . . . . . . . . . . . . . . . . . . . 171 GES144F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES144F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES144FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES189F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GES189F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 171 GHH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 GS2B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56 GS4EH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56 GS4H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56 GS4H121W . . . . . . . . . . . . . . . . . . . . . . . . . 55-56 GS4H/B . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56 GS4MT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 GTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56 GTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56 H HB2SP19-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 HB2SP25-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 HB4SP19-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 HB4SP25-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 HB6SP19-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 HBN.75-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 HBN1-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 HBN1.5-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 HBN2-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 HBN2.5-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 HBN3-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 HBN4-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 HCME06A12-C130 . . . . . . . . . . . . . . . . . . . . . 121 HCMP06B12-C20 . . . . . . . . . . . . . . . . . . . . . . 121 HCMP06C12-C20 . . . . . . . . . . . . . . . . . . . . . . 121 HKBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 HLC3S-X0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLC5S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLM-15R0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLS1.5S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLS-15R0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLS3S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLS5S-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLS-75R0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLSP1.5S-X12 . . . . . . . . . . . . . . . . . . . . . . . . 40 HLSP3S-X12. . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLSP5S-X12. . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLT2I-X0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Part Number Page Number HLT3I-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLTP2I-X12. . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HLTP3I-X12. . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HSC.25-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 HSC.25-L100. . . . . . . . . . . . . . . . . . . . . . . . . . 119 HSEC0.5-X, HSEC0.8-X . . . . . . . . . . . . . . . . 155 HSEC1.0-X, HSEC1.5-5 . . . . . . . . . . . . . . . . 155 HSEC2.0-5, HSEC4.0-2 . . . . . . . . . . . . . . . . 155 HSG-115V-650 . . . . . . . . . . . . . . . . . . . . . . . . 157 HSG-A1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 HSG-A2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 HSG-A3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 HSG-A4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 HSG-P1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 HSG-P2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 HSG-P3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 HSG-P7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 HST0.4-3-Q, HST0.4-48-5 . . . . . . . . . . . . . . 154 HST0.4-6-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 154 HST0.4-6-X . . . . . . . . . . . . . . . . . . . . . . . . . . 154 HST0.8-6-3, HST0.8-6-X, HST0.8-9-X, HST0.8-12-5, HST0.8-48-5 . . . . . . . . . . . . . . 154 HST1.1-6-3, HST1.1-6-X, HST1.1-9-2, HST1.1-9-X, HST1.1-12-5, HST1.1-48-5 . . . 154 HST1.5-9-X, HST1.5-12-1, HST1.5-12-5, HST1.5-48-5 . . . . . . . . . . . . . . . . . . . . . . . . . 154 HST2.0-9-5, HST2.0-12-2, HST2.0-48-2. . . . 154 HST3.0-12-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 154 HST3.0-48-2 . . . . . . . . . . . . . . . . . . . . . . . . . 154 HSTT05-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT05-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT05-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT05-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT05-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT06-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT06-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT06-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT06-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT06-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT06-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT06-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT09-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT09-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT09-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT09-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT09-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT09-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT09-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT12-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT12-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT12-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT12-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT12-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT12-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT12-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT19-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT19-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT19-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT19-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 HSTT19-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT19-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT19-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT25-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT25-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT25-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT25-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT25-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT25-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT38-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT38-48-TL. . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT38-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT38-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT38-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT38-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT38-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT50-48-Q . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT50-48-T. . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT50-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT50-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT50-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT50-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT75-48-5. . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT75-48-CQ . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT75-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT75-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT75-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT75-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT100-48-5. . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT100-48-LQ . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT100-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Alphanumeric Part Number Index Part Number Page Number HSTT100-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 HSTT100-YK1 . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT150-48-5. . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT150-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT200-48-5. . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT200-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT300-48-2. . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT300-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT400-48-2. . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTT400-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 HSTTA19-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA19-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA25-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA25-48-TL . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA25-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA38-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA38-48-TL . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA38-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA50-48-5 . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA50-48-T . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA50-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA75-48-5 . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA75-48-C . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA75-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA100-48-5 . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA100-48-L . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA100-Y . . . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA150-48-5 . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA150-48-Q . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTA150-Y . . . . . . . . . . . . . . . . . . . . . . . . . . 152 HSTTK05-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150 HSTTK06-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150 HSTTK09-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150 HSTTK12-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150 HSTTK19-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150 HSTTK25-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150 HSTTK38-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 150 HSTTK50-48-5 . . . . . . . . . . . . . . . . . . . . . . . . 150 HSTTK75-48-5 . . . . . . . . . . . . . . . . . . . . . . . . 150 HSTTK100-48-5 . . . . . . . . . . . . . . . . . . . . . . . 150 HSTTN25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTN38-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTN50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTN63-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTN75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTN88-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTN100-C . . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTN125-C . . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTN150-C . . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTN175-C . . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTN200-Q. . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTN300-Q. . . . . . . . . . . . . . . . . . . . . . . . . . 148 HSTTP05-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP05-M. . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP05-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP06-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP06-M. . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP06-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP09-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP09-M. . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP09-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP12-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP12-M. . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP12-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP19-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP19-M. . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP19-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP25-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP25-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP38-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP38-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP38-T . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP50-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP75-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP100-C . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP100-Q. . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP150-C . . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP150-Q. . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTP200-Q. . . . . . . . . . . . . . . . . . . . . . . . . . 147 HSTTRA12-48-Q . . . . . . . . . . . . . . . . . . . . . . . 153 HSTTRA19-48-Q . . . . . . . . . . . . . . . . . . . . . . . 153 HSTTRA25-48-Q . . . . . . . . . . . . . . . . . . . . . . . 153 HSTTRA38-48-Q . . . . . . . . . . . . . . . . . . . . . . . 153 HSTTRA50-48-5 . . . . . . . . . . . . . . . . . . . . . . . 153 HSTTRA75-48-5 . . . . . . . . . . . . . . . . . . . . . . . 153 HSTTRA100-48-5 . . . . . . . . . . . . . . . . . . . . . . 153 HSTTT03-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 149 HSTTT04-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 149 HSTTT05-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 149 HSTTT06-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 149 HSTTT08-48-Q . . . . . . . . . . . . . . . . . . . . . . . . 149 Part Number Page Number HSTTT09-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTT046-48-Q . . . . . . . . . . . . . . . . . . . . . . . HSTTT055-48-Q . . . . . . . . . . . . . . . . . . . . . . . HSTTT12-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTT15-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTT19-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTT24-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTT30-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTT37-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTT43-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTT47-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTT56-48-5 . . . . . . . . . . . . . . . . . . . . . . . . HSTTT66-48-5 . . . . . . . . . . . . . . . . . . . . . . . . HSTTT75-48-5 . . . . . . . . . . . . . . . . . . . . . . . . HSTTT93-48-5 . . . . . . . . . . . . . . . . . . . . . . . . HSTTT112-48-5 . . . . . . . . . . . . . . . . . . . . . . . HSTTT131-48-2 . . . . . . . . . . . . . . . . . . . . . . . HSTTT150-48-2 . . . . . . . . . . . . . . . . . . . . . . . HSTTV05-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTV05-48-TL . . . . . . . . . . . . . . . . . . . . . . . HSTTV05-C. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV05-M . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV05-M2 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV05-M4 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV05-M6 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV05-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV05-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV06-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTV06-48-TL . . . . . . . . . . . . . . . . . . . . . . . HSTTV06-C. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV06-M . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV06-M2 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV06-M4 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV06-M6 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV06-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV06-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV09-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTV09-48-TL . . . . . . . . . . . . . . . . . . . . . . . HSTTV09-C. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV09-M . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV09-M2 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV09-M4 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV09-M6 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV09-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV09-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV12-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTV12-48-TL . . . . . . . . . . . . . . . . . . . . . . . HSTTV12-C. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV12-M . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV12-M2 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV12-M4 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV12-M6 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV12-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV12-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV19-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTV19-48-TL . . . . . . . . . . . . . . . . . . . . . . . HSTTV19-C. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV19-M . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV19-M2 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV19-M4 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV19-M6 . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV19-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV19-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV25-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTV25-48-TL . . . . . . . . . . . . . . . . . . . . . . . HSTTV25-C. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV25-D. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV25-D2. . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV25-D4. . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV25-D6. . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV25-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV25-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV38-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTV38-48-TL . . . . . . . . . . . . . . . . . . . . . . . HSTTV38-C. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV38-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV38-T . . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV38-T2 . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV38-T4 . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV38-T6 . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV38-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV50-48-Q . . . . . . . . . . . . . . . . . . . . . . . . HSTTV50-48-T . . . . . . . . . . . . . . . . . . . . . . . . HSTTV50-C. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV50-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV50-T . . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV50-T2 . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV50-T4 . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV50-T6 . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV50-Y . . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV75-48-5 . . . . . . . . . . . . . . . . . . . . . . . . HSTTV75-48-CQ. . . . . . . . . . . . . . . . . . . . . . . HSTTV75-C. . . . . . . . . . . . . . . . . . . . . . . . . . . HSTTV75-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . 149 149 149 149 149 149 149 149 149 149 149 149 149 149 149 149 149 149 145 145 145 146 146 146 146 146 146 145 145 145 146 146 146 146 146 146 145 145 145 146 146 146 146 146 146 145 145 145 146 146 146 146 146 146 145 145 145 146 146 146 146 146 146 145 145 145 146 146 146 146 146 146 145 145 145 146 146 146 146 146 146 145 145 145 146 146 146 146 146 146 145 145 145 146 Page Number Part Number HSTTV75-T. . . . . . . . . . . . . . . . . . . . . . . . . . . 146 HSTTV75-T2. . . . . . . . . . . . . . . . . . . . . . . . . . 146 HSTTV75-T4. . . . . . . . . . . . . . . . . . . . . . . . . . 146 HSTTV75-T6. . . . . . . . . . . . . . . . . . . . . . . . . . 146 HSTTV75-Y. . . . . . . . . . . . . . . . . . . . . . . . . . . 146 HSTTV100-48-5 . . . . . . . . . . . . . . . . . . . . . . . 145 HSTTV100-48-LQ . . . . . . . . . . . . . . . . . . . . . . 145 HSTTV100-C . . . . . . . . . . . . . . . . . . . . . . . . . 145 HSTTV100-Q . . . . . . . . . . . . . . . . . . . . . . . . . 146 HSTTV100-Y. . . . . . . . . . . . . . . . . . . . . . . . . . 146 HSTTV150-48-5 . . . . . . . . . . . . . . . . . . . . . . . 145 HSTTV150-C . . . . . . . . . . . . . . . . . . . . . . . . . 145 HSTTVA12-48-Q. . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA12-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA19-48-Q. . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA19-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA25-48-Q. . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA25-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA38-48-Q. . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA38-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA50-48-5 . . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA50-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA75-48-5 . . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA75-Y . . . . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA100-48-5 . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA100-Y . . . . . . . . . . . . . . . . . . . . . . . . 151 HSTTVA150-48-5 . . . . . . . . . . . . . . . . . . . . . . 151 HSTT-YK1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT-YK1-45 . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT-YK2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 HSTT-YK2-45 . . . . . . . . . . . . . . . . . . . . . . . . . 144 HTMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 HWS2819-C . . . . . . . . . . . . . . . . . . . . . . . . . . 121 I ILT1M-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ILT1.5I-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ILT2S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ILT3S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ILT4LH-TL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ILT4S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ILT6LH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMP094 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMP125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMP187 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMP-FIX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV2 . . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV4 . . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV4A . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV5A . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV5B . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV6 . . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV6A . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV6B . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV7A . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV8 . . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV11 . . . . . . . . . . . . . . . . . . . . . . . . . IT9100-CUV16B . . . . . . . . . . . . . . . . . . . . . . . . IT9115-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV2 . . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV4 . . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV4A . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV5A . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV5B . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV6 . . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV6A . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV6B . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV7A . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV8 . . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV11 . . . . . . . . . . . . . . . . . . . . . . . . . IT9115-CUV16B . . . . . . . . . . . . . . . . . . . . . . . . IT9150-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IT9250-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IT940-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IT965-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 37 37 37 37 37 37 79 79 79 79 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 K K-205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K2-BLD2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K4H-BLD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K4M-BLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K4MTG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-504 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KB-550 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KB-551 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KGTHBLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KGTHTL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KGTSBLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KGTSTL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KIMS-H366-C2 . . . . . . . . . . . . . . . . . . . . . . . . . KIMS-H430-C6 . . . . . . . . . . . . . . . . . . . . . . . . . KIMS-H500-C4 . . . . . . . . . . . . . . . . . . . . . . . . . KP-506A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KP-506A-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Most commonly used parts appear in BOLD. 54 59 59 78 78 54 54 54 59 59 59 59 94 94 94 54 54 189 Alphanumeric Part Number Index Page Number Part Number KP-509 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 KPPTEHB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 KPPTEHG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 KPTSG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 KPTSTL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 KST2EHG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 KT2MG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 L LC3-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 LC5-A-C8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 LC10-A-L8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 LHMS-S10-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 LHMS-S5-D . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 LHMS-S6-D . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 LPFCM14-A-C14 . . . . . . . . . . . . . . . . . . . . . . .114 LPFCM22-A-C14 . . . . . . . . . . . . . . . . . . . . . . .114 LPFCM34-A-C14 . . . . . . . . . . . . . . . . . . . . . . .114 LPMM-S2-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 LPMM-S5-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 LPMS-S8-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 94 LWC19-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . .111 LWC19-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC19-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC19-H25-C . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC19-H25-C14 . . . . . . . . . . . . . . . . . . . . . . .111 LWC19-H25-C20 . . . . . . . . . . . . . . . . . . . . . . .111 LWC25-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . .111 LWC25-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC25-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC25-H25-C . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC25-H25-C14 . . . . . . . . . . . . . . . . . . . . . . .111 LWC25-H25-C20 . . . . . . . . . . . . . . . . . . . . . . .111 LWC38-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . .111 LWC38-A-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC38-A-C20 . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC38-H25-C . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC38-H25-C14 . . . . . . . . . . . . . . . . . . . . . . .111 LWC38-H25-C20 . . . . . . . . . . . . . . . . . . . . . . .111 LWC50-A-L. . . . . . . . . . . . . . . . . . . . . . . . . . . .111 LWC50-A-L14. . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC50-A-L20. . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC50-H25-L. . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC50-H25-L14. . . . . . . . . . . . . . . . . . . . . . . .111 LWC50-H25-L20. . . . . . . . . . . . . . . . . . . . . . . .111 LWC75-A-L. . . . . . . . . . . . . . . . . . . . . . . . . . . .111 LWC75-A-L14. . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC75-A-L20. . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC75-H25-L. . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC75-H25-L14. . . . . . . . . . . . . . . . . . . . . . . .111 LWC75-H25-L20. . . . . . . . . . . . . . . . . . . . . . . .111 LWC100-A-L. . . . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC100-A-L14. . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC100-A-L20. . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC100-H25-L. . . . . . . . . . . . . . . . . . . . . . . . . 111 LWC100-H25-L14. . . . . . . . . . . . . . . . . . . . . . .111 LWC100-H25-L20. . . . . . . . . . . . . . . . . . . . . . .111 M MACC25-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 111 MACC62-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . 111 MBH-MR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MBH-TLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MBM-H25-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 MBMS-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 MBS-MR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MBS-TLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MCEH-S25-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MCMS12-P-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 MCMS25-P-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 MCMS30-P-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 MEHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 META-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 METS3-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 METS4-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 MLT1S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT2H-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT2LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 MLT2S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT2.7S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT2.7WH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT4H-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT4LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 MLT4S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT4WH-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT6H-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT6LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 MLT6S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT6WH-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT8H-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT8LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 MLT8S-CP . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT8WH-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT10H-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . 77 190 Most commonly used parts appear in BOLD. Page Number Part Number MLT10WH-LP . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLT12H-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MLTC2H-LP316. . . . . . . . . . . . . . . . . . . . . . . . . 77 MLTC4H-LP316 . . . . . . . . . . . . . . . . . . . . . . . 77 MLTC6H-LP316. . . . . . . . . . . . . . . . . . . . . . . . . 77 MLTC8H-LP316. . . . . . . . . . . . . . . . . . . . . . . . . 77 MLTC10H-LP316 . . . . . . . . . . . . . . . . . . . . . . . . 77 MMP350-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 MMP350H-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 MMP350W38-C . . . . . . . . . . . . . . . . . . . . . . . . . 78 MP150-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP150-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP150KIT-Q . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP150-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP175-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP175-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP175-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP200-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP200-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP200-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP250-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP250-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP250-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP250KIT-Q . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP250W175-C. . . . . . . . . . . . . . . . . . . . . . . . . 106 MP350-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP350-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MP350KIT-Q . . . . . . . . . . . . . . . . . . . . . . . . . . 106 MPMH38-L0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 MPMS19-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 MPMS25-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 MPMWH32-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . 99 MPWM-H56 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 MS2W38T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80 MS4W38T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80 MS4W50T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80 MS4W63T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80 MS6W38T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80 MS6W50T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80 MS6W63T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80 MS8W38T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80 MS8W50T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80 MS8W63T15-L4. . . . . . . . . . . . . . . . . . . . . . . . . 80 MS10W38T15-L4. . . . . . . . . . . . . . . . . . . . . . . . 80 MS10W50T15-L4. . . . . . . . . . . . . . . . . . . . . . . . 80 MS10W63T15-L4. . . . . . . . . . . . . . . . . . . . . . . . 80 MSBW38-C4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 MSBW50-C4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 MSBW63-C4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 MSW38T15-CR4 . . . . . . . . . . . . . . . . . . . . . . . . 80 MSW50T15-CR4 . . . . . . . . . . . . . . . . . . . . . . . . 80 MSW63T15-CR4 . . . . . . . . . . . . . . . . . . . . . . . . 80 MTHH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MTHS-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MTM1H10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 78 MTM1H25-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 MTM1H-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 MTM2H-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 MTMBH-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 MTP1H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP1H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP1S-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP1S-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP2H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP2H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP2S-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP2S-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP3H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP3H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP3S-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP3S-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP4H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP4H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP4S-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP4S-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP5H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP5H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP5S-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP5S-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP6H-E6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MTP6H-E10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 95 MWK094 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 MWK125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 MWK187 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 P PAT1M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 60 PAT1.5M . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 60 PATMBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PBMS-H25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 PBMS-H25-C14 . . . . . . . . . . . . . . . . . . . . . . . . . 98 PBMS-H25-M0. . . . . . . . . . . . . . . . . . . . . . . . . . 98 PBMS-H25-M30. . . . . . . . . . . . . . . . . . . . . . . . . 98 PBSC1-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Part Number Page Number PBSC3-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 PBSC6-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 PBSC12-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 PC038-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116 PC050-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116 PC062-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116 PC075-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116 PC087-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116 PC100-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116 PC112-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116 PC125-H25D-C0 . . . . . . . . . . . . . . . . . . . . . . . 116 PCSH-B-CR. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 PCSS-B-CR. . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 PDH10-37 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 PDM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 PFX-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 PFX-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 PHM1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 PHM2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 PHM3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 PL283N1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 PL289N1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 PL2M2S-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PL3B5EH-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 PL3M2S-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PLA2S-A-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 PLB2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 PLB3S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 PLB4H-TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 PLB4H-TL0. . . . . . . . . . . . . . . . . . . . . . . . . . . 47 PLB4S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 PLC1M-S4-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PLC1M-S4-C0. . . . . . . . . . . . . . . . . . . . . . . . . 18 PLC1.5I-S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PLC1.5I-S8-C0 . . . . . . . . . . . . . . . . . . . . . . . . 18 PLC2H-S25-L . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PLC2H-S25-TL0 . . . . . . . . . . . . . . . . . . . . . . . . 18 PLC2S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PLC2S-S10-C0 . . . . . . . . . . . . . . . . . . . . . . . . 18 PLC2S-S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PLC2S-S6-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PLC3S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PLC3S-S10-C0 . . . . . . . . . . . . . . . . . . . . . . . . . 18 PLC4H-S25-L . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PLC4H-S25-L0 . . . . . . . . . . . . . . . . . . . . . . . . 18 PLC4S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PLC4S-S10-C0 . . . . . . . . . . . . . . . . . . . . . . . . 18 PLF1M-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PLF1MA-C . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PLF1MB-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PLF1M-M69. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PLM1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PLM1M-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PLM2M-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PLM2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PLM4S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PLP1S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 PLP1.5I-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 PLP1.5S-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 PLP2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 PLST4HS25-TL300 . . . . . . . . . . . . . . . . . . . . . . 46 PLST30SC-D30. . . . . . . . . . . . . . . . . . . . . . . . . 46 PLST50SC-D30. . . . . . . . . . . . . . . . . . . . . . . . . 46 PLT.6SM-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT.6SM-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT.7M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT1M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT1M-C702 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 PLT1M-C76 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 PLT1M-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L1-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L1-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L1-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L3-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L3-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-L4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L5-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L5-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L5-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L5-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L5-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-L6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L6-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Alphanumeric Part Number Index Part Number Page Number PLT1M-L6-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L6-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L6-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L6-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-L8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L8-0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L8-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L8-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L8-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-L8-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PLT1M-M53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT1M-M54 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT1M-M55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT1M-M59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT1M-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PLT1M-M100. . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PLT1M-M109. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PLT1M-XMR . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-XMR0 . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-XMR1 . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-XMR2 . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-XMR3 . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-XMR4 . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-XMR5 . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-XMR6 . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-XMR7 . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-XMR8 . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-XMR10 . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1M-XMR30 . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT1S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT1.5I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT1.5I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT1.5I-M100 . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PLT1.5I-M109 . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PLT1.5I-M120 . . . . . . . . . . . . . . . . . . . . . . . . . . 21 PLT1.5I-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PLT1.5M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT1.5M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT1.5M-XMR . . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1.5M-XMR0 . . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1.5M-XMR30 . . . . . . . . . . . . . . . . . . . . . . . . 61 PLT1.5S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT1.5S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT2EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PLT2EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PLT2H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PLT2H-LO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PLT2H-TL100 . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PLT2H-TL109 . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PLT2I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT2I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT2I-C76 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 PLT2I-M53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT2I-M54 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT2I-M55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT2I-M59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT2I-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PLT2M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT2M-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT2M-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PLT2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT2S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT2S-C702 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 PLT2S-C76 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 PLT2S-M53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT2S-M54 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT2S-M55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT2S-M59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT2S-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PLT2S-M100 . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PLT2S-M109 . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PLT2S-M120 . . . . . . . . . . . . . . . . . . . . . . . . . . 21 PLT2.5H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PLT2.5H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PLT2.5I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT2.5I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT2.5S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT2.5S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT3H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PLT3H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PLT3H-L76 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 PLT3H-TL100 . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PLT3H-TL109 . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PLT3I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT3I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT3S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT3S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT3S-C76 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 PLT3S-C702 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 PLT3S-M53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT3S-M54 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT3S-M55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Part Number Page Number PLT3S-M59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLT3S-M100. . . . . . . . . . . . . . . . . . . . . . . . . . .19 PLT3S-M109 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PLT4H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT4H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 PLT4H-L76 . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 PLT4H-TL69 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PLT4H-TL100 . . . . . . . . . . . . . . . . . . . . . . . . . .19 PLT4H-TL109 . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PLT4H-TL120 . . . . . . . . . . . . . . . . . . . . . . . . . . 21 PLT4I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 PLT4I-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 PLT4S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 PLT4S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 PLT4S-C76 . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 PLT4S-M69. . . . . . . . . . . . . . . . . . . . . . . . . . . .20 PLT4S-M100 . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PLT4S-M109 . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PLT4S-M120 . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 PLT4.5S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT4.5S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT5H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT5H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 PLT5EH-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT5EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . .15 PLT5S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PLT5S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PLT6H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT6H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 PLT6EH-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT6EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . .15 PLT6LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT6LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PLT7LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT7LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PLT8EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PLT8EH-Q0. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PLT8H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT8H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 PLT8LH-C120 . . . . . . . . . . . . . . . . . . . . . . . . . . 21 PLT8LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PLT8LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PLT9LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT9LH-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 PLT10EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT10EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . .15 PLT10LH-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT12EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PLT12EH-Q0. . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PLT13H-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 PLT13H-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PLUP40S-D30 . . . . . . . . . . . . . . . . . . . . . . . . .13 PLUP40SE-D30 . . . . . . . . . . . . . . . . . . . . . . . .13 PLWP1M-C. . . . . . . . . . . . . . . . . . . . . . . . . . . .11 PLWP1S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 PLWP1SA-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PLWP1SB-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PLWP1.5I-C . . . . . . . . . . . . . . . . . . . . . . . . . . .11 PLWP1.5S-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PLWP1.5SA-D. . . . . . . . . . . . . . . . . . . . . . . . . . 11 PLWP2H-TL . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PLWP2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 PLWP2SA-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PLWP2SB-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PLWP3H-TL . . . . . . . . . . . . . . . . . . . . . . . . . . .11 PLWP30SC-D30. . . . . . . . . . . . . . . . . . . . . . . .12 PLWP40SC-D30 . . . . . . . . . . . . . . . . . . . . . . . . 12 PLWP40SD-D30. . . . . . . . . . . . . . . . . . . . . . . .12 PLWP50SC-D30. . . . . . . . . . . . . . . . . . . . . . . .12 PLWP50SE-D30 . . . . . . . . . . . . . . . . . . . . . . . . 12 PM2H25-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 PM2H25-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 PM2H25-M30 . . . . . . . . . . . . . . . . . . . . . . . . . . 98 PMCC38H25-C . . . . . . . . . . . . . . . . . . . . . . . . 109 PMCC38H25-M0 . . . . . . . . . . . . . . . . . . . . . . . 109 PP1S-S10-X . . . . . . . . . . . . . . . . . . . . . . . . . . 102 PP1S-S12-X . . . . . . . . . . . . . . . . . . . . . . . . . . 102 PP2S-S10-X . . . . . . . . . . . . . . . . . . . . . . . . . . 102 PP2S-S12-X . . . . . . . . . . . . . . . . . . . . . . . . . . 102 PP5x50F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PPC25x50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PPC25x50F . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 PPF2S-S25-V . . . . . . . . . . . . . . . . . . . . . . . . . 133 PPF2S-S25-V69 . . . . . . . . . . . . . . . . . . . . . . . 133 PPF2SV-S25-V . . . . . . . . . . . . . . . . . . . . . . . . 133 PPF2SV-S25-V69 . . . . . . . . . . . . . . . . . . . . . . 133 PPH10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 PPTEH . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 58 PPTMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 PPTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 58 PRA2S-A-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 PRLWP30S-D30 . . . . . . . . . . . . . . . . . . . . . . . . 12 PRLWP50S-D30 . . . . . . . . . . . . . . . . . . . . . . . . 12 Page Number Part Number PRST30S-S14-M30 . . . . . . . . . . . . . . . . . . . . . 46 PRT1S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT1S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PRT1.5S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT1.5S-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PRT2EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT2EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 PRT2H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT2H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PRT2S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT2S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PRT3H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT3H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PRT3S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT3S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PRT4H-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT4H-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PRT4S-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT4S-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PRT5EH-C100 . . . . . . . . . . . . . . . . . . . . . . . . . 19 PRT5EH-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT5EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . 16 PRT6EH-C100 . . . . . . . . . . . . . . . . . . . . . . . . . 19 PRT6EH-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT6EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . 16 PRT8EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT8EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 PRT10EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT10EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . 16 PRT12EH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRT12EH-Q0 . . . . . . . . . . . . . . . . . . . . . . . . . . 16 PRWP1S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PRWP1SA-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PRWP1SB-D. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PRWP1.5S-D . . . . . . . . . . . . . . . . . . . . . . . . . 11 PRWP2H-TL . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PRWP2S-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 58 PW50F-T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 PW50F-T20. . . . . . . . . . . . . . . . . . . . . . . . . . . 168 PW75F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 PW75F-C20 . . . . . . . . . . . . . . . . . . . . . . . . . . 168 PWMS-H25-C . . . . . . . . . . . . . . . . . . . . . . . . . . 98 PWMS-H25-M0. . . . . . . . . . . . . . . . . . . . . . . . . 98 PWT50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 PWT75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 PX-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 PX-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 PX-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 R RAFCBI1-S6-C20 . . . . . . . . . . . . . . . . . . . . . . 103 RAFCBI2-S6-C20 . . . . . . . . . . . . . . . . . . . . . . 103 RAFCBI3-S6-C20 . . . . . . . . . . . . . . . . . . . . . . 103 RAMH-S10-D . . . . . . . . . . . . . . . . . . . . . . . . . . 96 RAMH-S6-D . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 RAMS-S3-M . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 RER.5E-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 RER.5-S6-X . . . . . . . . . . . . . . . . . . . . . . . . . . 124 RER.75E-X . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 RER.75-S6-X . . . . . . . . . . . . . . . . . . . . . . . . . 124 RER1.25E-X . . . . . . . . . . . . . . . . . . . . . . . . . . 124 RER1.25-S6-X . . . . . . . . . . . . . . . . . . . . . . . . 124 S SACS50-T100. . . . . . . . . . . . . . . . . . . . . . . . . SE125PFR-LR0 . . . . . . . . . . . . . . . . . . . . . . . SE125PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . . SE125PFR-LR8 . . . . . . . . . . . . . . . . . . . . . . . SE125PFR-TR8 . . . . . . . . . . . . . . . . . . . . . . . SE125P-LR0 . . . . . . . . . . . . . . . . . . . . . . . . . . SE125P-TR0. . . . . . . . . . . . . . . . . . . . . . . . . . SE125P-LR8 . . . . . . . . . . . . . . . . . . . . . . . . . . SE125P-TR8. . . . . . . . . . . . . . . . . . . . . . . . . . SE125P-TR10. . . . . . . . . . . . . . . . . . . . . . . . . SE12PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . . . SE12PFR-MR0 . . . . . . . . . . . . . . . . . . . . . . . . SE12PFR-TR8 . . . . . . . . . . . . . . . . . . . . . . . . SE12PFR-MR8 . . . . . . . . . . . . . . . . . . . . . . . . SE12P-MR10 . . . . . . . . . . . . . . . . . . . . . . . . . SE12P-TR0. . . . . . . . . . . . . . . . . . . . . . . . . . . SE12P-MR0 . . . . . . . . . . . . . . . . . . . . . . . . . . SE12P-TR8. . . . . . . . . . . . . . . . . . . . . . . . . . . SE12P-MR8 . . . . . . . . . . . . . . . . . . . . . . . . . . SE25PFRLD-MR0. . . . . . . . . . . . . . . . . . . . . . SE25PFR-MR0 . . . . . . . . . . . . . . . . . . . . . . . . SE25PFR-MR8 . . . . . . . . . . . . . . . . . . . . . . . . SE25PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . . . SE25PFR-TR8 . . . . . . . . . . . . . . . . . . . . . . . . SE25PLD-MR0 . . . . . . . . . . . . . . . . . . . . . . . . SE25P-MR0 . . . . . . . . . . . . . . . . . . . . . . . . . . SE25P-MR8 . . . . . . . . . . . . . . . . . . . . . . . . . . SE25P-MR10 . . . . . . . . . . . . . . . . . . . . . . . . . SE25P-TR0. . . . . . . . . . . . . . . . . . . . . . . . . . . SE25P-TR8. . . . . . . . . . . . . . . . . . . . . . . . . . . Most commonly used parts appear in BOLD. 107 176 176 176 176 175 175 175 175 175 176 176 176 176 175 175 175 175 175 176 176 176 176 176 175 175 175 175 175 175 191 Alphanumeric Part Number Index Page Number Part Number SE38PFR-MR0. . . . . . . . . . . . . . . . . . . . . . . . . 176 SE38PFR-MR8. . . . . . . . . . . . . . . . . . . . . . . . . 176 SE38PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . . . . 176 SE38PFR-TR8 . . . . . . . . . . . . . . . . . . . . . . . . . 176 SE38P-MR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE38P-MR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE38P-MR10 . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SE38P-TR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE38P-TR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE50P-CR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE50P-CR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE50P-DR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE50P-DR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE50P-DR10 . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SE50PFR-CR0 . . . . . . . . . . . . . . . . . . . . . . . . . 176 SE50PFR-CR8 . . . . . . . . . . . . . . . . . . . . . . . . . 176 SE50PFR-DR0 . . . . . . . . . . . . . . . . . . . . . . . . . 176 SE50PFR-DR8 . . . . . . . . . . . . . . . . . . . . . . . . . 176 SE75P-CR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE75P-CR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE75P-DR0 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE75P-DR8 . . . . . . . . . . . . . . . . . . . . . . . . . . .175 SE75P-DR10 . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SE75PFR-CR0 . . . . . . . . . . . . . . . . . . . . . . . . . 176 SE75PFR-CR8 . . . . . . . . . . . . . . . . . . . . . . . . . 176 SE75PFR-DR0 . . . . . . . . . . . . . . . . . . . . . . . . . 176 SE75PFR-DR8 . . . . . . . . . . . . . . . . . . . . . . . . . 176 SE150PFR-LR0 . . . . . . . . . . . . . . . . . . . . . . . . 176 SE150PFR-LR8 . . . . . . . . . . . . . . . . . . . . . . . . 176 SE150PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . . . 176 SE150PFR-TR8 . . . . . . . . . . . . . . . . . . . . . . . . 176 SE150P-LR0 . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SE150P-LR8 . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SE150P-TR0 . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SE150P-TR8 . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SE150P-TR10 . . . . . . . . . . . . . . . . . . . . . . . . . 175 SE175PFR-TR0 . . . . . . . . . . . . . . . . . . . . . . . . 176 SE175P-TR0 . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SHH1-S8-X . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 SHH3-S8-X . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 SICH25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 SICH38-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 SICH50-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 SICH75-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 SICH100-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 SICH150-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 SMS-A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 SMS-S6-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 SR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 SSC2S-S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SSC4H-S25-L. . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SSPM2.5H-L300 . . . . . . . . . . . . . . . . . . . . . . . 44 SSPM2.5HP-L300 . . . . . . . . . . . . . . . . . . . . . . . 44 SSPM4H-L300 . . . . . . . . . . . . . . . . . . . . . . . . 44 SSPM4HLP-TL300. . . . . . . . . . . . . . . . . . . . . . . 44 SSPM4HP-L300 . . . . . . . . . . . . . . . . . . . . . . . 44 SST1M-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SST1.5I-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SST1.5M-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 SST2I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SST2S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SST3I-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SST3S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SST4H-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SST4S-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SST8H-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 ST2EH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 57 ST2MT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 STH2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 57 STHV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 57 STS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 57 T T100F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T100F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T12F-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T12F-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T12FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T12FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167 T19FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T19FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167 T25FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T25FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167 T38FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T38FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167 T50FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T50FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167 T62FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T62FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167 T75FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T75FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . .167 T100FR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T100FR-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T12N-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 192 Most commonly used parts appear in BOLD. Part Number Page Number T12N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T12R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T19F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T19F-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T19N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T19N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T19R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T19T-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T12T-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T25F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-C1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-C2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-C3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-C4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-C5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-C6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-C7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-C8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-C10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-C16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25F-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T25N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T25N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T25R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T25R-C20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T25T-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T38F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T38F-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T38N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T38N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T38R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T50F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-C1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-C2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-C3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-C4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-C5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-C6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-C7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-C8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-C10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-C16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50F-X0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T50N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T50N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T50R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T50T-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T62F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T62F-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T62N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T62N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T62R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T62T-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T75F-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T75F-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 T75N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T75N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T75R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T75T-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T100N-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T100N-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T100R-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 T100T-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 TA1S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 TA1S8-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 TA1S8-M30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 TA1S8-M69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 TA1S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 TA1S10-M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 TA2-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 TC3-5-C100 . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 TC5-7-C100 . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 TC5x8-C100. . . . . . . . . . . . . . . . . . . . . . . . . . . 118 TC6x10-C100. . . . . . . . . . . . . . . . . . . . . . . . . . 118 TC7-10-C100 . . . . . . . . . . . . . . . . . . . . . . . . . . 118 TC7x14-C100. . . . . . . . . . . . . . . . . . . . . . . . . . 118 TC9x18-C100. . . . . . . . . . . . . . . . . . . . . . . . . . 118 TC10-14-C100 . . . . . . . . . . . . . . . . . . . . . . . . . 118 TC14-20-C100 . . . . . . . . . . . . . . . . . . . . . . . . . 118 THM1SC-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 THM1SC-C30. . . . . . . . . . . . . . . . . . . . . . . . . . 101 THMSC35-C630. . . . . . . . . . . . . . . . . . . . . . . . 100 THMSC35-C639. . . . . . . . . . . . . . . . . . . . . . . . 100 THMSC35F-C630 . . . . . . . . . . . . . . . . . . . . . . 100 THMSC35F-C639 . . . . . . . . . . . . . . . . . . . . . . 100 THMSP20-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 100 THMSP20F-C. . . . . . . . . . . . . . . . . . . . . . . . . . 100 THMSP20F-C30. . . . . . . . . . . . . . . . . . . . . . . . 100 THMSP25-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 100 THMSP25F-C. . . . . . . . . . . . . . . . . . . . . . . . . . 100 Page Number Part Number TJF-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 TM1A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 TM1S4-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 TM1S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 TM2A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 TM2PWH25-C . . . . . . . . . . . . . . . . . . . . . . . . . . 98 TM2R6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 TM2S6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 TM2S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 TM3A-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 TM3R6-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 TM3S8-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 TM3S10-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 TM3S25-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 TM3-X2-C0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 TMEH25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 TMEHS8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 TMEH-S8-Q0. . . . . . . . . . . . . . . . . . . . . . . . . . . 90 TMEHS10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 TMEH-S10-C100. . . . . . . . . . . . . . . . . . . . . . . . 90 TMEH-S10-C109. . . . . . . . . . . . . . . . . . . . . . . . 90 TMEH-S10-Q0. . . . . . . . . . . . . . . . . . . . . . . . . . 90 TMEH-S25-Q0. . . . . . . . . . . . . . . . . . . . . . . . . . 90 TMEH-X2-L0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 TMSH50-T300, TMSTHS10-D0, TMSTHS13-D0, TMSTHS16-D0, TMSTHS19-D0, TMSTLHS5-M0, TMSTLHS6-M0, TMSTLHS8-M0. . . . . . . . . . . . 91 TP2-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 TP4H-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 TRC18FR-X8. . . . . . . . . . . . . . . . . . . . . . . . . . 132 TTLK3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 TV105-.25TL, TV105-.25TL20, TV105-.31TL, TV105-.31TL20, TV105-.38TL, TV105-.38TL20, TV105-.44TL, TV105-.44TL20, TV105-.50TL, TV105-.50TL20, TV105-.56C, TV105-.56C20, TV105-.63C, TV105-.63C20, TV105-.75C, TV105-.75C20, TV105-.88C, TV105-.88C20, TV105-0TL, TV105-0TL20, TV105-1.0L, TV105-1.0L20, TV105-1.25L, TV105-1.25L20, TV105-1.50L, TV105-1.50L20, TV105-10D, TV105-10D20, TV105-11D, TV105-11D20, TV105-12D, TV105-12D20, TV105-13M, TV105-13M20, TV105-14M, TV105-14M20, TV105-15M, TV105-15M20, TV105-16M, TV105-16M20, TV105-17M, TV105-17M20, TV105-18M, TV105-18M20, TV105-19M, TV105-19M20, TV105-1TL, TV105-1TL20, TV105-20M, TV105-20M20, TV105-222.5M, TV105-222.5M20, TV105-242.5M, TV105-242.5M20, TV105-2TL, TV105-2TL20, TV105-3TL, TV105-3TL20, TV105-4TL, TV105-4TL20, TV105-5TL, TV105-5TL20, TV105-6TL, TV105-6TL20, TV105-7D, TV105-7D20, TV105-8D, TV105-8D20, TV105-9D, TV105-9D20 . . . . . . . . . . . . . . . . . . . . . . . . . . 163 TWR-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 TWR-C0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 V VCC25-A-C, VCC25-A-C20, VCC50-A-C . . . . 113 VSC.25-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 VSC.25-L100 . . . . . . . . . . . . . . . . . . . . . . . . . . 119 VWS106-C. . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 VWS106-C20. . . . . . . . . . . . . . . . . . . . . . . . . . 130 VWS42105-C, VWS4218-C, VWS4238-C, VWS4274-C. . . . . . . . . . . . . . . . . . . . . . . . . . . 121 VWSDC-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 W WBS6-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 WEH-E8-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 WPMH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 WS25-25-C, WS25-50-C, WS25-75-C, WS35-25-C, WS35-50-CFB, WS35-75-C, WS50-25-C, WS50-50-C, WS50-75-C, WS75-25-C, WS75-50-C, WS75-75-C . . . . . . 120